umass.c revision 1.175
1 /* $NetBSD: umass.c,v 1.175 2019/05/05 03:17:54 mrg Exp $ */ 2 3 /* 4 * Copyright (c) 2003 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Charles M. Hannum. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 /*- 33 * Copyright (c) 1999 MAEKAWA Masahide <bishop (at) rr.iij4u.or.jp>, 34 * Nick Hibma <n_hibma (at) freebsd.org> 35 * All rights reserved. 36 * 37 * Redistribution and use in source and binary forms, with or without 38 * modification, are permitted provided that the following conditions 39 * are met: 40 * 1. Redistributions of source code must retain the above copyright 41 * notice, this list of conditions and the following disclaimer. 42 * 2. Redistributions in binary form must reproduce the above copyright 43 * notice, this list of conditions and the following disclaimer in the 44 * documentation and/or other materials provided with the distribution. 45 * 46 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 47 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 48 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 49 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 50 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 51 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 52 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 53 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 54 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 55 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 56 * SUCH DAMAGE. 57 * 58 * $FreeBSD: src/sys/dev/usb/umass.c,v 1.13 2000/03/26 01:39:12 n_hibma Exp $ 59 */ 60 61 /* 62 * Universal Serial Bus Mass Storage Class specs: 63 * http://www.usb.org/developers/docs/devclass_docs/Mass_Storage_Specification_Overview_v1.4_2-19-2010.pdf 64 * http://www.usb.org/developers/docs/devclass_docs/usbmassbulk_10.pdf 65 * http://www.usb.org/developers/docs/devclass_docs/usb_msc_cbi_1.1.pdf 66 * http://www.usb.org/developers/docs/devclass_docs/usbmass-ufi10.pdf 67 */ 68 69 /* 70 * Ported to NetBSD by Lennart Augustsson <augustss (at) NetBSD.org>. 71 * Parts of the code written by Jason R. Thorpe <thorpej (at) shagadelic.org>. 72 */ 73 74 /* 75 * The driver handles 3 Wire Protocols 76 * - Command/Bulk/Interrupt (CBI) 77 * - Command/Bulk/Interrupt with Command Completion Interrupt (CBI with CCI) 78 * - Mass Storage Bulk-Only (BBB) 79 * (BBB refers Bulk/Bulk/Bulk for Command/Data/Status phases) 80 * 81 * Over these wire protocols it handles the following command protocols 82 * - SCSI 83 * - 8070 (ATA/ATAPI for rewritable removable media) 84 * - UFI (USB Floppy Interface) 85 * 86 * 8070i is a transformed version of the SCSI command set. UFI is a transformed 87 * version of the 8070i command set. The sc->transform method is used to 88 * convert the commands into the appropriate format (if at all necessary). 89 * For example, ATAPI requires all commands to be 12 bytes in length amongst 90 * other things. 91 * 92 * The source code below is marked and can be split into a number of pieces 93 * (in this order): 94 * 95 * - probe/attach/detach 96 * - generic transfer routines 97 * - BBB 98 * - CBI 99 * - CBI_I (in addition to functions from CBI) 100 * - CAM (Common Access Method) 101 * - SCSI 102 * - UFI 103 * - 8070i 104 * 105 * The protocols are implemented using a state machine, for the transfers as 106 * well as for the resets. The state machine is contained in umass_*_state. 107 * The state machine is started through either umass_*_transfer or 108 * umass_*_reset. 109 * 110 * The reason for doing this is a) CAM performs a lot better this way and b) it 111 * avoids sleeping in interrupt context which is prohibited (for example after a 112 * failed transfer). 113 */ 114 115 /* 116 * The SCSI related part of this driver has been derived from the 117 * dev/ppbus/vpo.c driver, by Nicolas Souchu (nsouch (at) freebsd.org). 118 * 119 * The CAM layer uses so called actions which are messages sent to the host 120 * adapter for completion. The actions come in through umass_cam_action. The 121 * appropriate block of routines is called depending on the transport protocol 122 * in use. When the transfer has finished, these routines call 123 * umass_cam_cb again to complete the CAM command. 124 */ 125 126 #include <sys/cdefs.h> 127 __KERNEL_RCSID(0, "$NetBSD: umass.c,v 1.175 2019/05/05 03:17:54 mrg Exp $"); 128 129 #ifdef _KERNEL_OPT 130 #include "opt_usb.h" 131 #endif 132 133 #include "atapibus.h" 134 #include "scsibus.h" 135 #include "wd.h" 136 137 #include <sys/param.h> 138 #include <sys/buf.h> 139 #include <sys/conf.h> 140 #include <sys/device.h> 141 #include <sys/kernel.h> 142 #include <sys/kmem.h> 143 #include <sys/sysctl.h> 144 #include <sys/systm.h> 145 146 #include <dev/usb/usb.h> 147 #include <dev/usb/usbdi.h> 148 #include <dev/usb/usbdi_util.h> 149 #include <dev/usb/usbdevs.h> 150 #include <dev/usb/usbhist.h> 151 152 #include <dev/usb/umassvar.h> 153 #include <dev/usb/umass_quirks.h> 154 #include <dev/usb/umass_scsipi.h> 155 #include <dev/usb/umass_isdata.h> 156 157 #include <dev/scsipi/scsipi_all.h> 158 #include <dev/scsipi/scsipiconf.h> 159 160 #ifdef USB_DEBUG 161 #ifdef UMASS_DEBUG 162 int umassdebug = 0; 163 164 SYSCTL_SETUP(sysctl_hw_umass_setup, "sysctl hw.umass setup") 165 { 166 int err; 167 const struct sysctlnode *rnode; 168 const struct sysctlnode *cnode; 169 170 err = sysctl_createv(clog, 0, NULL, &rnode, 171 CTLFLAG_PERMANENT, CTLTYPE_NODE, "umass", 172 SYSCTL_DESCR("umass global controls"), 173 NULL, 0, NULL, 0, CTL_HW, CTL_CREATE, CTL_EOL); 174 175 if (err) 176 goto fail; 177 178 /* control debugging printfs */ 179 err = sysctl_createv(clog, 0, &rnode, &cnode, 180 CTLFLAG_PERMANENT|CTLFLAG_READWRITE, CTLTYPE_INT, 181 "debug", SYSCTL_DESCR("Enable debugging output"), 182 NULL, 0, &umassdebug, sizeof(umassdebug), CTL_CREATE, CTL_EOL); 183 if (err) 184 goto fail; 185 186 return; 187 fail: 188 aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err); 189 } 190 191 const char *states[TSTATE_STATES+1] = { 192 /* should be kept in sync with the list at transfer_state */ 193 "Idle", 194 "BBB CBW", 195 "BBB Data", 196 "BBB Data bulk-in/-out clear stall", 197 "BBB CSW, 1st attempt", 198 "BBB CSW bulk-in clear stall", 199 "BBB CSW, 2nd attempt", 200 "BBB Reset", 201 "BBB bulk-in clear stall", 202 "BBB bulk-out clear stall", 203 "CBI Command", 204 "CBI Data", 205 "CBI Status", 206 "CBI Data bulk-in/-out clear stall", 207 "CBI Status intr-in clear stall", 208 "CBI Reset", 209 "CBI bulk-in clear stall", 210 "CBI bulk-out clear stall", 211 NULL 212 }; 213 #endif 214 #endif 215 216 /* USB device probe/attach/detach functions */ 217 int umass_match(device_t, cfdata_t, void *); 218 void umass_attach(device_t, device_t, void *); 219 int umass_detach(device_t, int); 220 static void umass_childdet(device_t, device_t); 221 int umass_activate(device_t, enum devact); 222 223 CFATTACH_DECL2_NEW(umass, sizeof(struct umass_softc), umass_match, 224 umass_attach, umass_detach, umass_activate, NULL, umass_childdet); 225 226 Static void umass_disco(struct umass_softc *sc); 227 228 /* generic transfer functions */ 229 Static usbd_status umass_setup_transfer(struct umass_softc *, 230 struct usbd_pipe *, 231 void *, int, int, 232 struct usbd_xfer *); 233 Static usbd_status umass_setup_ctrl_transfer(struct umass_softc *, 234 usb_device_request_t *, 235 void *, int, int, 236 struct usbd_xfer *); 237 Static void umass_clear_endpoint_stall(struct umass_softc *, int, 238 struct usbd_xfer *); 239 #if 0 240 Static void umass_reset(struct umass_softc *, transfer_cb_f, void *); 241 #endif 242 243 /* Bulk-Only related functions */ 244 Static void umass_bbb_transfer(struct umass_softc *, int, void *, int, void *, 245 int, int, u_int, int, umass_callback, void *); 246 Static void umass_bbb_reset(struct umass_softc *, int); 247 Static void umass_bbb_state(struct usbd_xfer *, void *, usbd_status); 248 249 usbd_status umass_bbb_get_max_lun(struct umass_softc *, uint8_t *); 250 251 /* CBI related functions */ 252 Static void umass_cbi_transfer(struct umass_softc *, int, void *, int, void *, 253 int, int, u_int, int, umass_callback, void *); 254 Static void umass_cbi_reset(struct umass_softc *, int); 255 Static void umass_cbi_state(struct usbd_xfer *, void *, usbd_status); 256 257 Static int umass_cbi_adsc(struct umass_softc *, char *, int, int, 258 struct usbd_xfer *); 259 260 const struct umass_wire_methods umass_bbb_methods = { 261 .wire_xfer = umass_bbb_transfer, 262 .wire_reset = umass_bbb_reset, 263 .wire_state = umass_bbb_state 264 }; 265 266 const struct umass_wire_methods umass_cbi_methods = { 267 .wire_xfer = umass_cbi_transfer, 268 .wire_reset = umass_cbi_reset, 269 .wire_state = umass_cbi_state 270 }; 271 272 #ifdef UMASS_DEBUG 273 /* General debugging functions */ 274 Static void umass_bbb_dump_cbw(struct umass_softc *, umass_bbb_cbw_t *); 275 Static void umass_bbb_dump_csw(struct umass_softc *, umass_bbb_csw_t *); 276 Static void umass_dump_buffer(struct umass_softc *, uint8_t *, int, int); 277 #endif 278 279 280 /* 281 * USB device probe/attach/detach 282 */ 283 284 int 285 umass_match(device_t parent, cfdata_t match, void *aux) 286 { 287 struct usbif_attach_arg *uiaa = aux; 288 const struct umass_quirk *quirk; 289 290 quirk = umass_lookup(uiaa->uiaa_vendor, uiaa->uiaa_product); 291 if (quirk != NULL && quirk->uq_match != UMASS_QUIRK_USE_DEFAULTMATCH) 292 return quirk->uq_match; 293 294 if (uiaa->uiaa_class != UICLASS_MASS) 295 return UMATCH_NONE; 296 297 switch (uiaa->uiaa_subclass) { 298 case UISUBCLASS_RBC: 299 case UISUBCLASS_SFF8020I: 300 case UISUBCLASS_QIC157: 301 case UISUBCLASS_UFI: 302 case UISUBCLASS_SFF8070I: 303 case UISUBCLASS_SCSI: 304 break; 305 default: 306 return UMATCH_IFACECLASS; 307 } 308 309 switch (uiaa->uiaa_proto) { 310 case UIPROTO_MASS_CBI_I: 311 case UIPROTO_MASS_CBI: 312 case UIPROTO_MASS_BBB_OLD: 313 case UIPROTO_MASS_BBB: 314 break; 315 default: 316 return UMATCH_IFACECLASS_IFACESUBCLASS; 317 } 318 319 return UMATCH_IFACECLASS_IFACESUBCLASS_IFACEPROTO; 320 } 321 322 void 323 umass_attach(device_t parent, device_t self, void *aux) 324 { 325 UMASSHIST_FUNC(); UMASSHIST_CALLED(); 326 struct umass_softc *sc = device_private(self); 327 struct usbif_attach_arg *uiaa = aux; 328 const struct umass_quirk *quirk; 329 usb_interface_descriptor_t *id; 330 usb_endpoint_descriptor_t *ed; 331 const char *sWire, *sCommand; 332 char *devinfop; 333 usbd_status err; 334 int i, error; 335 336 sc->sc_dev = self; 337 338 aprint_naive("\n"); 339 aprint_normal("\n"); 340 341 mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_SOFTUSB); 342 cv_init(&sc->sc_detach_cv, "umassdet"); 343 344 devinfop = usbd_devinfo_alloc(uiaa->uiaa_device, 0); 345 aprint_normal_dev(self, "%s\n", devinfop); 346 usbd_devinfo_free(devinfop); 347 348 sc->sc_udev = uiaa->uiaa_device; 349 sc->sc_iface = uiaa->uiaa_iface; 350 sc->sc_ifaceno = uiaa->uiaa_ifaceno; 351 352 quirk = umass_lookup(uiaa->uiaa_vendor, uiaa->uiaa_product); 353 if (quirk != NULL) { 354 sc->sc_wire = quirk->uq_wire; 355 sc->sc_cmd = quirk->uq_cmd; 356 sc->sc_quirks = quirk->uq_flags; 357 sc->sc_busquirks = quirk->uq_busquirks; 358 359 if (quirk->uq_fixup != NULL) 360 (*quirk->uq_fixup)(sc); 361 } else { 362 sc->sc_wire = UMASS_WPROTO_UNSPEC; 363 sc->sc_cmd = UMASS_CPROTO_UNSPEC; 364 sc->sc_quirks = 0; 365 sc->sc_busquirks = 0; 366 } 367 368 if (sc->sc_wire == UMASS_WPROTO_UNSPEC) { 369 switch (uiaa->uiaa_proto) { 370 case UIPROTO_MASS_CBI: 371 sc->sc_wire = UMASS_WPROTO_CBI; 372 break; 373 case UIPROTO_MASS_CBI_I: 374 sc->sc_wire = UMASS_WPROTO_CBI_I; 375 break; 376 case UIPROTO_MASS_BBB: 377 case UIPROTO_MASS_BBB_OLD: 378 sc->sc_wire = UMASS_WPROTO_BBB; 379 break; 380 default: 381 DPRINTFM(UDMASS_GEN, "Unsupported wire protocol %ju", 382 uiaa->uiaa_proto, 0, 0, 0); 383 return; 384 } 385 } 386 387 if (sc->sc_cmd == UMASS_CPROTO_UNSPEC) { 388 switch (uiaa->uiaa_subclass) { 389 case UISUBCLASS_SCSI: 390 sc->sc_cmd = UMASS_CPROTO_SCSI; 391 break; 392 case UISUBCLASS_UFI: 393 sc->sc_cmd = UMASS_CPROTO_UFI; 394 break; 395 case UISUBCLASS_SFF8020I: 396 case UISUBCLASS_SFF8070I: 397 case UISUBCLASS_QIC157: 398 sc->sc_cmd = UMASS_CPROTO_ATAPI; 399 break; 400 case UISUBCLASS_RBC: 401 sc->sc_cmd = UMASS_CPROTO_RBC; 402 break; 403 default: 404 DPRINTFM(UDMASS_GEN, "Unsupported command protocol %ju", 405 uiaa->uiaa_subclass, 0, 0, 0); 406 return; 407 } 408 } 409 410 switch (sc->sc_wire) { 411 case UMASS_WPROTO_CBI: 412 sWire = "CBI"; 413 break; 414 case UMASS_WPROTO_CBI_I: 415 sWire = "CBI with CCI"; 416 break; 417 case UMASS_WPROTO_BBB: 418 sWire = "Bulk-Only"; 419 break; 420 default: 421 sWire = "unknown"; 422 break; 423 } 424 425 switch (sc->sc_cmd) { 426 case UMASS_CPROTO_RBC: 427 sCommand = "RBC"; 428 break; 429 case UMASS_CPROTO_SCSI: 430 sCommand = "SCSI"; 431 break; 432 case UMASS_CPROTO_UFI: 433 sCommand = "UFI"; 434 break; 435 case UMASS_CPROTO_ATAPI: 436 sCommand = "ATAPI"; 437 break; 438 case UMASS_CPROTO_ISD_ATA: 439 sCommand = "ISD-ATA"; 440 break; 441 default: 442 sCommand = "unknown"; 443 break; 444 } 445 446 aprint_verbose_dev(self, "using %s over %s\n", sCommand, sWire); 447 448 if (quirk != NULL && quirk->uq_init != NULL) { 449 err = (*quirk->uq_init)(sc); 450 if (err) { 451 aprint_error_dev(self, "quirk init failed\n"); 452 umass_disco(sc); 453 return; 454 } 455 } 456 457 /* 458 * In addition to the Control endpoint the following endpoints 459 * are required: 460 * a) bulk-in endpoint. 461 * b) bulk-out endpoint. 462 * and for Control/Bulk/Interrupt with CCI (CBI_I) 463 * c) intr-in 464 * 465 * The endpoint addresses are not fixed, so we have to read them 466 * from the device descriptors of the current interface. 467 */ 468 id = usbd_get_interface_descriptor(sc->sc_iface); 469 for (i = 0 ; i < id->bNumEndpoints ; i++) { 470 ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i); 471 if (ed == NULL) { 472 aprint_error_dev(self, 473 "could not read endpoint descriptor\n"); 474 return; 475 } 476 if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN 477 && (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) { 478 sc->sc_epaddr[UMASS_BULKIN] = ed->bEndpointAddress; 479 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT 480 && (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) { 481 sc->sc_epaddr[UMASS_BULKOUT] = ed->bEndpointAddress; 482 } else if (sc->sc_wire == UMASS_WPROTO_CBI_I 483 && UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN 484 && (ed->bmAttributes & UE_XFERTYPE) == UE_INTERRUPT) { 485 sc->sc_epaddr[UMASS_INTRIN] = ed->bEndpointAddress; 486 #ifdef UMASS_DEBUG 487 if (UGETW(ed->wMaxPacketSize) > 2) { 488 DPRINTFM(UDMASS_CBI, "sc %#jx intr size is %jd", 489 (uintptr_t)sc, UGETW(ed->wMaxPacketSize), 490 0, 0); 491 } 492 #endif 493 } 494 } 495 496 /* check whether we found all the endpoints we need */ 497 if (!sc->sc_epaddr[UMASS_BULKIN] || !sc->sc_epaddr[UMASS_BULKOUT] || 498 (sc->sc_wire == UMASS_WPROTO_CBI_I && 499 !sc->sc_epaddr[UMASS_INTRIN])) { 500 aprint_error_dev(self, "endpoint not found %u/%u/%u\n", 501 sc->sc_epaddr[UMASS_BULKIN], 502 sc->sc_epaddr[UMASS_BULKOUT], 503 sc->sc_epaddr[UMASS_INTRIN]); 504 return; 505 } 506 507 /* 508 * Get the maximum LUN supported by the device. 509 */ 510 if (sc->sc_wire == UMASS_WPROTO_BBB && 511 (sc->sc_quirks & UMASS_QUIRK_NOGETMAXLUN) == 0) { 512 err = umass_bbb_get_max_lun(sc, &sc->maxlun); 513 if (err) { 514 aprint_error_dev(self, "unable to get Max Lun: %s\n", 515 usbd_errstr(err)); 516 return; 517 } 518 if (sc->maxlun > 0) 519 sc->sc_busquirks |= PQUIRK_FORCELUNS; 520 } else { 521 sc->maxlun = 0; 522 } 523 524 /* Open the bulk-in and -out pipe */ 525 DPRINTFM(UDMASS_USB, "sc %#jx: opening iface %#jx epaddr %jd for " 526 "BULKOUT", (uintptr_t)sc, (uintptr_t)sc->sc_iface, 527 sc->sc_epaddr[UMASS_BULKOUT], 0); 528 err = usbd_open_pipe(sc->sc_iface, sc->sc_epaddr[UMASS_BULKOUT], 529 USBD_EXCLUSIVE_USE | USBD_MPSAFE, &sc->sc_pipe[UMASS_BULKOUT]); 530 if (err) { 531 aprint_error_dev(self, "cannot open %u-out pipe (bulk)\n", 532 sc->sc_epaddr[UMASS_BULKOUT]); 533 umass_disco(sc); 534 return; 535 } 536 DPRINTFM(UDMASS_USB, "sc %#jx: opening iface %#jx epaddr %jd for " 537 "BULKIN", (uintptr_t)sc, (uintptr_t)sc->sc_iface, 538 sc->sc_epaddr[UMASS_BULKIN], 0); 539 err = usbd_open_pipe(sc->sc_iface, sc->sc_epaddr[UMASS_BULKIN], 540 USBD_EXCLUSIVE_USE | USBD_MPSAFE, &sc->sc_pipe[UMASS_BULKIN]); 541 if (err) { 542 aprint_error_dev(self, "could not open %u-in pipe (bulk)\n", 543 sc->sc_epaddr[UMASS_BULKIN]); 544 umass_disco(sc); 545 return; 546 } 547 /* 548 * Open the intr-in pipe if the protocol is CBI with CCI. 549 * Note: early versions of the Zip drive do have an interrupt pipe, but 550 * this pipe is unused 551 * 552 * We do not open the interrupt pipe as an interrupt pipe, but as a 553 * normal bulk endpoint. We send an IN transfer down the wire at the 554 * appropriate time, because we know exactly when to expect data on 555 * that endpoint. This saves bandwidth, but more important, makes the 556 * code for handling the data on that endpoint simpler. No data 557 * arriving concurrently. 558 */ 559 if (sc->sc_wire == UMASS_WPROTO_CBI_I) { 560 DPRINTFM(UDMASS_USB, 561 "sc %#jx: opening iface %#jx epaddr %jd for INTRIN", 562 (uintptr_t)sc, (uintptr_t)sc->sc_iface, 563 sc->sc_epaddr[UMASS_INTRIN], 0); 564 err = usbd_open_pipe(sc->sc_iface, sc->sc_epaddr[UMASS_INTRIN], 565 USBD_EXCLUSIVE_USE | USBD_MPSAFE, &sc->sc_pipe[UMASS_INTRIN]); 566 if (err) { 567 aprint_error_dev(self, "couldn't open %u-in (intr)\n", 568 sc->sc_epaddr[UMASS_INTRIN]); 569 umass_disco(sc); 570 return; 571 } 572 } 573 574 /* initialisation of generic part */ 575 sc->transfer_state = TSTATE_IDLE; 576 577 for (i = 0; i < XFER_NR; i++) { 578 sc->transfer_xfer[i] = NULL; 579 } 580 581 /* 582 * Create the transfers 583 */ 584 struct usbd_pipe *pipe0 = usbd_get_pipe0(sc->sc_udev); 585 switch (sc->sc_wire) { 586 case UMASS_WPROTO_BBB: 587 err = usbd_create_xfer(sc->sc_pipe[UMASS_BULKIN], 588 UMASS_MAX_TRANSFER_SIZE, 0, 0, 589 &sc->transfer_xfer[XFER_BBB_DATAIN]); 590 if (err) 591 goto fail_create; 592 err = usbd_create_xfer(sc->sc_pipe[UMASS_BULKOUT], 593 UMASS_MAX_TRANSFER_SIZE, 0, 0, 594 &sc->transfer_xfer[XFER_BBB_DATAOUT]); 595 if (err) 596 goto fail_create; 597 err = usbd_create_xfer(sc->sc_pipe[UMASS_BULKOUT], 598 UMASS_BBB_CBW_SIZE, 0, 0, 599 &sc->transfer_xfer[XFER_BBB_CBW]); 600 if (err) 601 goto fail_create; 602 err = usbd_create_xfer(sc->sc_pipe[UMASS_BULKIN], 603 UMASS_BBB_CSW_SIZE, 0, 0, 604 &sc->transfer_xfer[XFER_BBB_CSW1]); 605 if (err) 606 goto fail_create; 607 err = usbd_create_xfer(sc->sc_pipe[UMASS_BULKIN], 608 UMASS_BBB_CSW_SIZE, 0, 0, 609 &sc->transfer_xfer[XFER_BBB_CSW2]); 610 if (err) 611 goto fail_create; 612 err = usbd_create_xfer(pipe0, 0, 0, 0, 613 &sc->transfer_xfer[XFER_BBB_SCLEAR]); 614 if (err) 615 goto fail_create; 616 err = usbd_create_xfer(pipe0, 0, 0, 0, 617 &sc->transfer_xfer[XFER_BBB_DCLEAR]); 618 if (err) 619 goto fail_create; 620 err = usbd_create_xfer(pipe0, 0, 0, 0, 621 &sc->transfer_xfer[XFER_BBB_RESET1]); 622 if (err) 623 goto fail_create; 624 err = usbd_create_xfer(pipe0, 0, 0, 0, 625 &sc->transfer_xfer[XFER_BBB_RESET2]); 626 if (err) 627 goto fail_create; 628 err = usbd_create_xfer(pipe0, 0, 0, 0, 629 &sc->transfer_xfer[XFER_BBB_RESET3]); 630 if (err) 631 goto fail_create; 632 break; 633 case UMASS_WPROTO_CBI: 634 case UMASS_WPROTO_CBI_I: 635 err = usbd_create_xfer(pipe0, sizeof(sc->cbl), 0, 0, 636 &sc->transfer_xfer[XFER_CBI_CB]); 637 if (err) 638 goto fail_create; 639 err = usbd_create_xfer(sc->sc_pipe[UMASS_BULKIN], 640 UMASS_MAX_TRANSFER_SIZE, 0, 0, 641 &sc->transfer_xfer[XFER_CBI_DATAIN]); 642 if (err) 643 goto fail_create; 644 err = usbd_create_xfer(sc->sc_pipe[UMASS_BULKOUT], 645 UMASS_MAX_TRANSFER_SIZE, 0, 0, 646 &sc->transfer_xfer[XFER_CBI_DATAOUT]); 647 if (err) 648 goto fail_create; 649 err = usbd_create_xfer(sc->sc_pipe[UMASS_INTRIN], 650 sizeof(sc->sbl), 0, 0, 651 &sc->transfer_xfer[XFER_CBI_STATUS]); 652 if (err) 653 goto fail_create; 654 err = usbd_create_xfer(pipe0, 0, 0, 0, 655 &sc->transfer_xfer[XFER_CBI_DCLEAR]); 656 if (err) 657 goto fail_create; 658 err = usbd_create_xfer(pipe0, 0, 0, 0, 659 &sc->transfer_xfer[XFER_CBI_SCLEAR]); 660 if (err) 661 goto fail_create; 662 err = usbd_create_xfer(pipe0, sizeof(sc->cbl), 0, 0, 663 &sc->transfer_xfer[XFER_CBI_RESET1]); 664 if (err) 665 goto fail_create; 666 err = usbd_create_xfer(pipe0, sizeof(sc->cbl), 0, 0, 667 &sc->transfer_xfer[XFER_CBI_RESET2]); 668 if (err) 669 goto fail_create; 670 err = usbd_create_xfer(pipe0, sizeof(sc->cbl), 0, 0, 671 &sc->transfer_xfer[XFER_CBI_RESET3]); 672 if (err) 673 goto fail_create; 674 break; 675 default: 676 fail_create: 677 aprint_error_dev(self, "failed to create xfers\n"); 678 umass_disco(sc); 679 return; 680 } 681 682 /* 683 * Record buffer pointers for data transfer (it's huge), command and 684 * status data here 685 */ 686 switch (sc->sc_wire) { 687 case UMASS_WPROTO_BBB: 688 sc->datain_buffer = 689 usbd_get_buffer(sc->transfer_xfer[XFER_BBB_DATAIN]); 690 sc->dataout_buffer = 691 usbd_get_buffer(sc->transfer_xfer[XFER_BBB_DATAOUT]); 692 sc->cmd_buffer = 693 usbd_get_buffer(sc->transfer_xfer[XFER_BBB_CBW]); 694 sc->s1_buffer = 695 usbd_get_buffer(sc->transfer_xfer[XFER_BBB_CSW1]); 696 sc->s2_buffer = 697 usbd_get_buffer(sc->transfer_xfer[XFER_BBB_CSW2]); 698 break; 699 case UMASS_WPROTO_CBI: 700 case UMASS_WPROTO_CBI_I: 701 sc->datain_buffer = 702 usbd_get_buffer(sc->transfer_xfer[XFER_CBI_DATAIN]); 703 sc->dataout_buffer = 704 usbd_get_buffer(sc->transfer_xfer[XFER_CBI_DATAOUT]); 705 sc->cmd_buffer = 706 usbd_get_buffer(sc->transfer_xfer[XFER_CBI_CB]); 707 sc->s1_buffer = 708 usbd_get_buffer(sc->transfer_xfer[XFER_CBI_STATUS]); 709 sc->s2_buffer = 710 usbd_get_buffer(sc->transfer_xfer[XFER_CBI_RESET1]); 711 break; 712 default: 713 break; 714 } 715 716 /* Initialise the wire protocol specific methods */ 717 switch (sc->sc_wire) { 718 case UMASS_WPROTO_BBB: 719 sc->sc_methods = &umass_bbb_methods; 720 break; 721 case UMASS_WPROTO_CBI: 722 case UMASS_WPROTO_CBI_I: 723 sc->sc_methods = &umass_cbi_methods; 724 break; 725 default: 726 umass_disco(sc); 727 return; 728 } 729 730 error = 0; 731 switch (sc->sc_cmd) { 732 case UMASS_CPROTO_RBC: 733 case UMASS_CPROTO_SCSI: 734 #if NSCSIBUS > 0 735 error = umass_scsi_attach(sc); 736 #else 737 aprint_error_dev(self, "scsibus not configured\n"); 738 #endif 739 break; 740 741 case UMASS_CPROTO_UFI: 742 case UMASS_CPROTO_ATAPI: 743 #if NATAPIBUS > 0 744 error = umass_atapi_attach(sc); 745 #else 746 aprint_error_dev(self, "atapibus not configured\n"); 747 #endif 748 break; 749 750 case UMASS_CPROTO_ISD_ATA: 751 #if NWD > 0 && NATABUS > 0 752 error = umass_isdata_attach(sc); 753 #else 754 aprint_error_dev(self, "isdata not configured\n"); 755 #endif 756 break; 757 758 default: 759 aprint_error_dev(self, "command protocol=0x%x not supported\n", 760 sc->sc_cmd); 761 umass_disco(sc); 762 return; 763 } 764 if (error) { 765 aprint_error_dev(self, "bus attach failed\n"); 766 umass_disco(sc); 767 return; 768 } 769 770 usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev, sc->sc_dev); 771 772 if (!pmf_device_register(self, NULL, NULL)) 773 aprint_error_dev(self, "couldn't establish power handler\n"); 774 775 DPRINTFM(UDMASS_GEN, "sc %#jx: Attach finished", (uintptr_t)sc, 776 0, 0, 0); 777 778 return; 779 } 780 781 static void 782 umass_childdet(device_t self, device_t child) 783 { 784 struct umass_softc *sc = device_private(self); 785 786 KASSERTMSG(child == sc->bus->sc_child, 787 "assertion child == sc->bus->sc_child failed\n"); 788 sc->bus->sc_child = NULL; 789 } 790 791 int 792 umass_detach(device_t self, int flags) 793 { 794 UMASSHIST_FUNC(); UMASSHIST_CALLED(); 795 struct umass_softc *sc = device_private(self); 796 struct umassbus_softc *scbus; 797 int rv = 0, i; 798 799 DPRINTFM(UDMASS_USB, "sc %#jx detached", (uintptr_t)sc, 0, 0, 0); 800 801 mutex_enter(&sc->sc_lock); 802 sc->sc_dying = true; 803 mutex_exit(&sc->sc_lock); 804 805 pmf_device_deregister(self); 806 807 /* Abort the pipes to wake up any waiting processes. */ 808 for (i = 0 ; i < UMASS_NEP ; i++) { 809 if (sc->sc_pipe[i] != NULL) 810 usbd_abort_pipe(sc->sc_pipe[i]); 811 } 812 813 /* Do we really need reference counting? Perhaps in ioctl() */ 814 mutex_enter(&sc->sc_lock); 815 if (--sc->sc_refcnt >= 0) { 816 #ifdef DIAGNOSTIC 817 aprint_normal_dev(self, "waiting for refcnt\n"); 818 #endif 819 /* Wait for processes to go away. */ 820 if (cv_timedwait(&sc->sc_detach_cv, &sc->sc_lock, hz * 60)) 821 aprint_error_dev(self, ": didn't detach\n"); 822 } 823 mutex_exit(&sc->sc_lock); 824 825 scbus = sc->bus; 826 if (scbus != NULL) { 827 if (scbus->sc_child != NULL) 828 rv = config_detach(scbus->sc_child, flags); 829 830 switch (sc->sc_cmd) { 831 case UMASS_CPROTO_RBC: 832 case UMASS_CPROTO_SCSI: 833 #if NSCSIBUS > 0 834 umass_scsi_detach(sc); 835 #else 836 aprint_error_dev(self, "scsibus not configured\n"); 837 #endif 838 break; 839 840 case UMASS_CPROTO_UFI: 841 case UMASS_CPROTO_ATAPI: 842 #if NATAPIBUS > 0 843 umass_atapi_detach(sc); 844 #else 845 aprint_error_dev(self, "atapibus not configured\n"); 846 #endif 847 break; 848 849 case UMASS_CPROTO_ISD_ATA: 850 #if NWD > 0 851 umass_isdata_detach(sc); 852 #else 853 aprint_error_dev(self, "isdata not configured\n"); 854 #endif 855 break; 856 857 default: 858 /* nothing to do */ 859 break; 860 } 861 862 /* protocol detach is expected to free sc->bus */ 863 KASSERT(sc->bus == NULL); 864 } 865 866 if (rv != 0) 867 return rv; 868 869 umass_disco(sc); 870 871 usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev, sc->sc_dev); 872 873 mutex_destroy(&sc->sc_lock); 874 cv_destroy(&sc->sc_detach_cv); 875 876 return rv; 877 } 878 879 int 880 umass_activate(device_t dev, enum devact act) 881 { 882 UMASSHIST_FUNC(); UMASSHIST_CALLED(); 883 struct umass_softc *sc = device_private(dev); 884 885 DPRINTFM(UDMASS_USB, "sc %#jx act %jd", (uintptr_t)sc, act, 0, 0); 886 887 switch (act) { 888 case DVACT_DEACTIVATE: 889 sc->sc_dying = 1; 890 return 0; 891 default: 892 return EOPNOTSUPP; 893 } 894 } 895 896 Static void 897 umass_disco(struct umass_softc *sc) 898 { 899 UMASSHIST_FUNC(); UMASSHIST_CALLED(); 900 int i; 901 902 /* Remove all the pipes. */ 903 for (i = 0 ; i < UMASS_NEP ; i++) { 904 if (sc->sc_pipe[i] != NULL) { 905 usbd_abort_pipe(sc->sc_pipe[i]); 906 } 907 } 908 909 /* Some xfers may be queued in the default pipe */ 910 usbd_abort_default_pipe(sc->sc_udev); 911 912 /* Free the xfers. */ 913 for (i = 0; i < XFER_NR; i++) { 914 if (sc->transfer_xfer[i] != NULL) { 915 usbd_destroy_xfer(sc->transfer_xfer[i]); 916 sc->transfer_xfer[i] = NULL; 917 } 918 } 919 920 for (i = 0 ; i < UMASS_NEP ; i++) { 921 if (sc->sc_pipe[i] != NULL) { 922 usbd_close_pipe(sc->sc_pipe[i]); 923 sc->sc_pipe[i] = NULL; 924 } 925 } 926 927 } 928 929 /* 930 * Generic functions to handle transfers 931 */ 932 933 Static usbd_status 934 umass_setup_transfer(struct umass_softc *sc, struct usbd_pipe *pipe, 935 void *buffer, int buflen, int flags, 936 struct usbd_xfer *xfer) 937 { 938 UMASSHIST_FUNC(); UMASSHIST_CALLED(); 939 usbd_status err; 940 941 if (sc->sc_dying) 942 return USBD_IOERROR; 943 944 /* Initialiase a USB transfer and then schedule it */ 945 946 usbd_setup_xfer(xfer, sc, buffer, buflen, flags, sc->timeout, 947 sc->sc_methods->wire_state); 948 949 err = usbd_transfer(xfer); 950 DPRINTFM(UDMASS_XFER, "start xfer buffer=%#jx buflen=%jd flags=0x%jx " 951 "timeout=%d", (uintptr_t)buffer, buflen, flags, sc->timeout); 952 if (err && err != USBD_IN_PROGRESS) { 953 DPRINTFM(UDMASS_BBB, "failed to setup transfer... err=%jd", 954 err, 0, 0, 0); 955 return err; 956 } 957 958 return USBD_NORMAL_COMPLETION; 959 } 960 961 962 Static usbd_status 963 umass_setup_ctrl_transfer(struct umass_softc *sc, usb_device_request_t *req, 964 void *buffer, int buflen, int flags, struct usbd_xfer *xfer) 965 { 966 UMASSHIST_FUNC(); UMASSHIST_CALLED(); 967 usbd_status err; 968 969 if (sc->sc_dying) 970 return USBD_IOERROR; 971 972 /* Initialiase a USB control transfer and then schedule it */ 973 974 usbd_setup_default_xfer(xfer, sc->sc_udev, (void *) sc, sc->timeout, 975 req, buffer, buflen, flags, sc->sc_methods->wire_state); 976 977 err = usbd_transfer(xfer); 978 if (err && err != USBD_IN_PROGRESS) { 979 DPRINTFM(UDMASS_BBB, "failed to setup ctrl transfer... err=%jd", 980 err, 0, 0, 0); 981 982 /* do not reset, as this would make us loop */ 983 return err; 984 } 985 986 return USBD_NORMAL_COMPLETION; 987 } 988 989 Static void 990 umass_clear_endpoint_stall(struct umass_softc *sc, int endpt, 991 struct usbd_xfer *xfer) 992 { 993 UMASSHIST_FUNC(); UMASSHIST_CALLED(); 994 995 if (sc->sc_dying) 996 return; 997 998 DPRINTFM(UDMASS_BBB, "Clear endpoint 0x%02jx stall", 999 sc->sc_epaddr[endpt], 0, 0, 0); 1000 1001 usbd_clear_endpoint_toggle(sc->sc_pipe[endpt]); 1002 1003 sc->sc_req.bmRequestType = UT_WRITE_ENDPOINT; 1004 sc->sc_req.bRequest = UR_CLEAR_FEATURE; 1005 USETW(sc->sc_req.wValue, UF_ENDPOINT_HALT); 1006 USETW(sc->sc_req.wIndex, sc->sc_epaddr[endpt]); 1007 USETW(sc->sc_req.wLength, 0); 1008 umass_setup_ctrl_transfer(sc, &sc->sc_req, NULL, 0, 0, xfer); 1009 } 1010 1011 #if 0 1012 Static void 1013 umass_reset(struct umass_softc *sc, transfer_cb_f cb, void *priv) 1014 { 1015 sc->transfer_cb = cb; 1016 sc->transfer_priv = priv; 1017 1018 /* The reset is a forced reset, so no error (yet) */ 1019 sc->reset(sc, STATUS_CMD_OK); 1020 } 1021 #endif 1022 1023 /* 1024 * Bulk protocol specific functions 1025 */ 1026 1027 Static void 1028 umass_bbb_reset(struct umass_softc *sc, int status) 1029 { 1030 UMASSHIST_FUNC(); UMASSHIST_CALLED(); 1031 KASSERTMSG(sc->sc_wire & UMASS_WPROTO_BBB, 1032 "sc->sc_wire == 0x%02x wrong for umass_bbb_reset\n", 1033 sc->sc_wire); 1034 1035 if (sc->sc_dying) 1036 return; 1037 1038 /* 1039 * Reset recovery (5.3.4 in Universal Serial Bus Mass Storage Class) 1040 * 1041 * For Reset Recovery the host shall issue in the following order: 1042 * a) a Bulk-Only Mass Storage Reset 1043 * b) a Clear Feature HALT to the Bulk-In endpoint 1044 * c) a Clear Feature HALT to the Bulk-Out endpoint 1045 * 1046 * This is done in 3 steps, states: 1047 * TSTATE_BBB_RESET1 1048 * TSTATE_BBB_RESET2 1049 * TSTATE_BBB_RESET3 1050 * 1051 * If the reset doesn't succeed, the device should be port reset. 1052 */ 1053 1054 DPRINTFM(UDMASS_BBB, "Bulk Reset", 0, 0, 0, 0); 1055 1056 sc->transfer_state = TSTATE_BBB_RESET1; 1057 sc->transfer_status = status; 1058 1059 /* reset is a class specific interface write */ 1060 sc->sc_req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1061 sc->sc_req.bRequest = UR_BBB_RESET; 1062 USETW(sc->sc_req.wValue, 0); 1063 USETW(sc->sc_req.wIndex, sc->sc_ifaceno); 1064 USETW(sc->sc_req.wLength, 0); 1065 umass_setup_ctrl_transfer(sc, &sc->sc_req, NULL, 0, 0, 1066 sc->transfer_xfer[XFER_BBB_RESET1]); 1067 } 1068 1069 Static void 1070 umass_bbb_transfer(struct umass_softc *sc, int lun, void *cmd, int cmdlen, 1071 void *data, int datalen, int dir, u_int timeout, 1072 int flags, umass_callback cb, void *priv) 1073 { 1074 UMASSHIST_FUNC(); UMASSHIST_CALLED(); 1075 static int dCBWtag = 42; /* unique for CBW of transfer */ 1076 1077 DPRINTFM(UDMASS_BBB, "sc %#jx cmd=0x%02jx", (uintptr_t)sc, 1078 *(u_char *)cmd, 0, 0); 1079 1080 KASSERTMSG(sc->sc_wire & UMASS_WPROTO_BBB, 1081 "sc->sc_wire == 0x%02x wrong for umass_bbb_transfer\n", 1082 sc->sc_wire); 1083 1084 if (sc->sc_dying) 1085 return; 1086 1087 /* Be a little generous. */ 1088 sc->timeout = timeout + USBD_DEFAULT_TIMEOUT; 1089 1090 /* 1091 * Do a Bulk-Only transfer with cmdlen bytes from cmd, possibly 1092 * a data phase of datalen bytes from/to the device and finally a 1093 * csw read phase. 1094 * If the data direction was inbound a maximum of datalen bytes 1095 * is stored in the buffer pointed to by data. 1096 * 1097 * umass_bbb_transfer initialises the transfer and lets the state 1098 * machine in umass_bbb_state handle the completion. It uses the 1099 * following states: 1100 * TSTATE_BBB_COMMAND 1101 * -> TSTATE_BBB_DATA 1102 * -> TSTATE_BBB_STATUS 1103 * -> TSTATE_BBB_STATUS2 1104 * -> TSTATE_BBB_IDLE 1105 * 1106 * An error in any of those states will invoke 1107 * umass_bbb_reset. 1108 */ 1109 1110 /* check the given arguments */ 1111 KASSERTMSG(datalen == 0 || data != NULL, 1112 "%s: datalen > 0, but no buffer",device_xname(sc->sc_dev)); 1113 KASSERTMSG(cmdlen <= CBWCDBLENGTH, 1114 "%s: cmdlen exceeds CDB length in CBW (%d > %d)", 1115 device_xname(sc->sc_dev), cmdlen, CBWCDBLENGTH); 1116 KASSERTMSG(dir == DIR_NONE || datalen > 0, 1117 "%s: datalen == 0 while direction is not NONE\n", 1118 device_xname(sc->sc_dev)); 1119 KASSERTMSG(datalen == 0 || dir != DIR_NONE, 1120 "%s: direction is NONE while datalen is not zero\n", 1121 device_xname(sc->sc_dev)); 1122 /* CTASSERT */ 1123 KASSERTMSG(sizeof(umass_bbb_cbw_t) == UMASS_BBB_CBW_SIZE, 1124 "%s: CBW struct does not have the right size (%zu vs. %u)\n", 1125 device_xname(sc->sc_dev), 1126 sizeof(umass_bbb_cbw_t), UMASS_BBB_CBW_SIZE); 1127 /* CTASSERT */ 1128 KASSERTMSG(sizeof(umass_bbb_csw_t) == UMASS_BBB_CSW_SIZE, 1129 "%s: CSW struct does not have the right size (%zu vs. %u)\n", 1130 device_xname(sc->sc_dev), 1131 sizeof(umass_bbb_csw_t), UMASS_BBB_CSW_SIZE); 1132 1133 /* 1134 * Determine the direction of the data transfer and the length. 1135 * 1136 * dCBWDataTransferLength (datalen) : 1137 * This field indicates the number of bytes of data that the host 1138 * intends to transfer on the IN or OUT Bulk endpoint(as indicated by 1139 * the Direction bit) during the execution of this command. If this 1140 * field is set to 0, the device will expect that no data will be 1141 * transferred IN or OUT during this command, regardless of the value 1142 * of the Direction bit defined in dCBWFlags. 1143 * 1144 * dCBWFlags (dir) : 1145 * The bits of the Flags field are defined as follows: 1146 * Bits 0-6 reserved 1147 * Bit 7 Direction - this bit shall be ignored if the 1148 * dCBWDataTransferLength field is zero. 1149 * 0 = data Out from host to device 1150 * 1 = data In from device to host 1151 */ 1152 1153 /* Fill in the Command Block Wrapper */ 1154 USETDW(sc->cbw.dCBWSignature, CBWSIGNATURE); 1155 USETDW(sc->cbw.dCBWTag, dCBWtag); 1156 dCBWtag++; /* cannot be done in macro (it will be done 4 times) */ 1157 USETDW(sc->cbw.dCBWDataTransferLength, datalen); 1158 /* DIR_NONE is treated as DIR_OUT (0x00) */ 1159 sc->cbw.bCBWFlags = (dir == DIR_IN? CBWFLAGS_IN:CBWFLAGS_OUT); 1160 sc->cbw.bCBWLUN = lun; 1161 sc->cbw.bCDBLength = cmdlen; 1162 memcpy(sc->cbw.CBWCDB, cmd, cmdlen); 1163 1164 DIF(UDMASS_BBB, umass_bbb_dump_cbw(sc, &sc->cbw)); 1165 1166 /* store the details for the data transfer phase */ 1167 sc->transfer_dir = dir; 1168 sc->transfer_data = data; 1169 sc->transfer_datalen = datalen; 1170 sc->transfer_actlen = 0; 1171 sc->transfer_cb = cb; 1172 sc->transfer_priv = priv; 1173 sc->transfer_status = STATUS_CMD_OK; 1174 1175 /* move from idle to the command state */ 1176 sc->transfer_state = TSTATE_BBB_COMMAND; 1177 1178 /* Send the CBW from host to device via bulk-out endpoint. */ 1179 if (umass_setup_transfer(sc, sc->sc_pipe[UMASS_BULKOUT], 1180 &sc->cbw, UMASS_BBB_CBW_SIZE, flags, 1181 sc->transfer_xfer[XFER_BBB_CBW])) { 1182 umass_bbb_reset(sc, STATUS_WIRE_FAILED); 1183 } 1184 } 1185 1186 1187 Static void 1188 umass_bbb_state(struct usbd_xfer *xfer, void *priv, 1189 usbd_status err) 1190 { 1191 UMASSHIST_FUNC(); UMASSHIST_CALLED(); 1192 struct umass_softc *sc = (struct umass_softc *) priv; 1193 struct usbd_xfer *next_xfer; 1194 int residue; 1195 1196 KASSERTMSG(sc->sc_wire & UMASS_WPROTO_BBB, 1197 "sc->sc_wire == 0x%02x wrong for umass_bbb_state\n", 1198 sc->sc_wire); 1199 1200 /* 1201 * State handling for BBB transfers. 1202 * 1203 * The subroutine is rather long. It steps through the states given in 1204 * Annex A of the Bulk-Only specification. 1205 * Each state first does the error handling of the previous transfer 1206 * and then prepares the next transfer. 1207 * Each transfer is done asynchroneously so after the request/transfer 1208 * has been submitted you will find a 'return;'. 1209 */ 1210 1211 DPRINTFM(UDMASS_BBB, "sc %#jx xfer %#jx, transfer_state %jd dir %jd", 1212 (uintptr_t)sc, (uintptr_t)xfer, sc->transfer_state, 1213 sc->transfer_dir); 1214 1215 if (err == USBD_CANCELLED) { 1216 DPRINTFM(UDMASS_BBB, "sc %#jx xfer %#jx cancelled", 1217 (uintptr_t)sc, (uintptr_t)xfer, 0, 0); 1218 1219 sc->transfer_state = TSTATE_IDLE; 1220 sc->transfer_cb(sc, sc->transfer_priv, 0, STATUS_TIMEOUT); 1221 return; 1222 } 1223 1224 if (sc->sc_dying) 1225 return; 1226 1227 switch (sc->transfer_state) { 1228 1229 /***** Bulk Transfer *****/ 1230 case TSTATE_BBB_COMMAND: 1231 /* Command transport phase, error handling */ 1232 if (err) { 1233 DPRINTFM(UDMASS_BBB, "sc %#jx failed to send CBW", 1234 (uintptr_t)sc, 0, 0, 0); 1235 /* If the device detects that the CBW is invalid, then 1236 * the device may STALL both bulk endpoints and require 1237 * a Bulk-Reset 1238 */ 1239 umass_bbb_reset(sc, STATUS_WIRE_FAILED); 1240 return; 1241 } 1242 1243 /* Data transport phase, setup transfer */ 1244 sc->transfer_state = TSTATE_BBB_DATA; 1245 if (sc->transfer_dir == DIR_IN) { 1246 if (umass_setup_transfer(sc, sc->sc_pipe[UMASS_BULKIN], 1247 sc->datain_buffer, sc->transfer_datalen, 1248 USBD_SHORT_XFER_OK, 1249 sc->transfer_xfer[XFER_BBB_DATAIN])) 1250 umass_bbb_reset(sc, STATUS_WIRE_FAILED); 1251 1252 return; 1253 } else if (sc->transfer_dir == DIR_OUT) { 1254 memcpy(sc->dataout_buffer, sc->transfer_data, 1255 sc->transfer_datalen); 1256 if (umass_setup_transfer(sc, 1257 sc->sc_pipe[UMASS_BULKOUT], sc->dataout_buffer, 1258 sc->transfer_datalen, 0,/* fixed length transfer */ 1259 sc->transfer_xfer[XFER_BBB_DATAOUT])) 1260 umass_bbb_reset(sc, STATUS_WIRE_FAILED); 1261 1262 return; 1263 } else { 1264 DPRINTFM(UDMASS_BBB, "sc %#jx: no data phase", 1265 (uintptr_t)sc, 0, 0, 0); 1266 } 1267 1268 /* if no data phase, err == 0 */ 1269 /* FALLTHROUGH */ 1270 case TSTATE_BBB_DATA: 1271 /* Command transport phase error handling (ignored if no data 1272 * phase (fallthrough from previous state)) */ 1273 if (sc->transfer_dir != DIR_NONE) { 1274 /* retrieve the length of the transfer that was done */ 1275 usbd_get_xfer_status(xfer, NULL, NULL, 1276 &sc->transfer_actlen, NULL); 1277 DPRINTFM(UDMASS_BBB, "sc %#jx: BBB_DATA actlen=%jd", 1278 (uintptr_t)sc, sc->transfer_actlen, 0, 0); 1279 1280 if (err) { 1281 DPRINTFM(UDMASS_BBB, "sc %#jx Data dir %jd " 1282 "err %jd failed, err %jd", 1283 (uintptr_t)sc, sc->transfer_dir, 1284 sc->transfer_datalen, err); 1285 1286 if (err == USBD_STALLED) { 1287 sc->transfer_state = TSTATE_BBB_DCLEAR; 1288 umass_clear_endpoint_stall(sc, 1289 (sc->transfer_dir == DIR_IN? 1290 UMASS_BULKIN:UMASS_BULKOUT), 1291 sc->transfer_xfer[XFER_BBB_DCLEAR]); 1292 } else { 1293 /* Unless the error is a pipe stall the 1294 * error is fatal. 1295 */ 1296 umass_bbb_reset(sc,STATUS_WIRE_FAILED); 1297 } 1298 return; 1299 } 1300 } 1301 1302 /* err == 0 (no data phase or successful) */ 1303 /* FALLTHROUGH */ 1304 case TSTATE_BBB_DCLEAR: /* stall clear after data phase */ 1305 if (sc->transfer_dir == DIR_IN) 1306 memcpy(sc->transfer_data, sc->datain_buffer, 1307 sc->transfer_actlen); 1308 1309 DIF(UDMASS_BBB, if (sc->transfer_dir == DIR_IN) 1310 umass_dump_buffer(sc, sc->transfer_data, 1311 sc->transfer_datalen, 48)); 1312 1313 /* err == 0 (no data phase or successful) */ 1314 /* FALLTHROUGH */ 1315 case TSTATE_BBB_SCLEAR: /* stall clear after status phase */ 1316 /* Reading of CSW after bulk stall condition in data phase 1317 * (TSTATE_BBB_DATA2) or bulk-in stall condition after 1318 * reading CSW (TSTATE_BBB_SCLEAR). 1319 * In the case of no data phase or successful data phase, 1320 * err == 0 and the following if block is passed. 1321 */ 1322 if (err) { /* should not occur */ 1323 printf("%s: BBB bulk-%s stall clear failed, %s\n", 1324 device_xname(sc->sc_dev), 1325 (sc->transfer_dir == DIR_IN? "in":"out"), 1326 usbd_errstr(err)); 1327 umass_bbb_reset(sc, STATUS_WIRE_FAILED); 1328 return; 1329 } 1330 1331 /* Status transport phase, setup transfer */ 1332 if (sc->transfer_state == TSTATE_BBB_COMMAND || 1333 sc->transfer_state == TSTATE_BBB_DATA || 1334 sc->transfer_state == TSTATE_BBB_DCLEAR) { 1335 /* After no data phase, successful data phase and 1336 * after clearing bulk-in/-out stall condition 1337 */ 1338 sc->transfer_state = TSTATE_BBB_STATUS1; 1339 next_xfer = sc->transfer_xfer[XFER_BBB_CSW1]; 1340 } else { 1341 /* After first attempt of fetching CSW */ 1342 sc->transfer_state = TSTATE_BBB_STATUS2; 1343 next_xfer = sc->transfer_xfer[XFER_BBB_CSW2]; 1344 } 1345 1346 /* Read the Command Status Wrapper via bulk-in endpoint. */ 1347 if (umass_setup_transfer(sc, sc->sc_pipe[UMASS_BULKIN], 1348 &sc->csw, UMASS_BBB_CSW_SIZE, 0, next_xfer)) { 1349 umass_bbb_reset(sc, STATUS_WIRE_FAILED); 1350 return; 1351 } 1352 1353 return; 1354 case TSTATE_BBB_STATUS1: /* first attempt */ 1355 case TSTATE_BBB_STATUS2: /* second attempt */ 1356 /* Status transfer, error handling */ 1357 if (err) { 1358 DPRINTFM(UDMASS_BBB, "sc %#jx Failed to read CSW " 1359 "err %jd (state %jd)", (uintptr_t)sc, err, 1360 sc->transfer_state, 0); 1361 1362 /* If this was the first attempt at fetching the CSW 1363 * retry it, otherwise fail. 1364 */ 1365 if (sc->transfer_state == TSTATE_BBB_STATUS1) { 1366 sc->transfer_state = TSTATE_BBB_SCLEAR; 1367 umass_clear_endpoint_stall(sc, UMASS_BULKIN, 1368 sc->transfer_xfer[XFER_BBB_SCLEAR]); 1369 return; 1370 } else { 1371 umass_bbb_reset(sc, STATUS_WIRE_FAILED); 1372 return; 1373 } 1374 } 1375 1376 DIF(UDMASS_BBB, umass_bbb_dump_csw(sc, &sc->csw)); 1377 1378 #ifdef UMASS_DEBUG 1379 residue = UGETDW(sc->csw.dCSWDataResidue); 1380 if (residue != sc->transfer_datalen - sc->transfer_actlen) 1381 printf("%s: dCSWDataResidue=%d req=%d act=%d\n", 1382 device_xname(sc->sc_dev), residue, 1383 sc->transfer_datalen, sc->transfer_actlen); 1384 #endif 1385 residue = sc->transfer_datalen - sc->transfer_actlen; 1386 1387 /* Translate weird command-status signatures. */ 1388 if ((sc->sc_quirks & UMASS_QUIRK_WRONG_CSWSIG) && 1389 UGETDW(sc->csw.dCSWSignature) == CSWSIGNATURE_OLYMPUS_C1) 1390 USETDW(sc->csw.dCSWSignature, CSWSIGNATURE); 1391 1392 /* Translate invalid command-status tags */ 1393 if (sc->sc_quirks & UMASS_QUIRK_WRONG_CSWTAG) 1394 USETDW(sc->csw.dCSWTag, UGETDW(sc->cbw.dCBWTag)); 1395 1396 /* Check CSW and handle any error */ 1397 if (UGETDW(sc->csw.dCSWSignature) != CSWSIGNATURE) { 1398 /* Invalid CSW: Wrong signature or wrong tag might 1399 * indicate that the device is confused -> reset it. 1400 */ 1401 printf("%s: Invalid CSW: sig 0x%08x should be 0x%08x\n", 1402 device_xname(sc->sc_dev), 1403 UGETDW(sc->csw.dCSWSignature), 1404 CSWSIGNATURE); 1405 1406 umass_bbb_reset(sc, STATUS_WIRE_FAILED); 1407 return; 1408 } else if (UGETDW(sc->csw.dCSWTag) 1409 != UGETDW(sc->cbw.dCBWTag)) { 1410 printf("%s: Invalid CSW: tag %d should be %d\n", 1411 device_xname(sc->sc_dev), 1412 UGETDW(sc->csw.dCSWTag), 1413 UGETDW(sc->cbw.dCBWTag)); 1414 1415 umass_bbb_reset(sc, STATUS_WIRE_FAILED); 1416 return; 1417 1418 /* CSW is valid here */ 1419 } else if (sc->csw.bCSWStatus > CSWSTATUS_PHASE) { 1420 printf("%s: Invalid CSW: status %d > %d\n", 1421 device_xname(sc->sc_dev), 1422 sc->csw.bCSWStatus, 1423 CSWSTATUS_PHASE); 1424 1425 umass_bbb_reset(sc, STATUS_WIRE_FAILED); 1426 return; 1427 } else if (sc->csw.bCSWStatus == CSWSTATUS_PHASE) { 1428 printf("%s: Phase Error, residue = %d\n", 1429 device_xname(sc->sc_dev), residue); 1430 1431 umass_bbb_reset(sc, STATUS_WIRE_FAILED); 1432 return; 1433 1434 } else if (sc->transfer_actlen > sc->transfer_datalen) { 1435 /* Buffer overrun! Don't let this go by unnoticed */ 1436 panic("%s: transferred %s %d bytes instead of %d bytes", 1437 device_xname(sc->sc_dev), 1438 sc->transfer_dir == DIR_IN ? "IN" : "OUT", 1439 sc->transfer_actlen, sc->transfer_datalen); 1440 #if 0 1441 } else if (sc->transfer_datalen - sc->transfer_actlen 1442 != residue) { 1443 DPRINTFM(UDMASS_BBB, "sc %#jx: actlen=%jd != " 1444 "residue=%jd\n", (uintptr_t)sc, 1445 sc->transfer_datalen - sc->transfer_actlen, 1446 residue, 0); 1447 1448 umass_bbb_reset(sc, STATUS_WIRE_FAILED); 1449 return; 1450 #endif 1451 } else if (sc->csw.bCSWStatus == CSWSTATUS_FAILED) { 1452 DPRINTFM(UDMASS_BBB, "sc %#jx: Command Failed, " 1453 "res = %jd", (uintptr_t)sc, residue, 0, 0); 1454 1455 /* SCSI command failed but transfer was succesful */ 1456 sc->transfer_state = TSTATE_IDLE; 1457 sc->transfer_cb(sc, sc->transfer_priv, residue, 1458 STATUS_CMD_FAILED); 1459 1460 return; 1461 1462 } else { /* success */ 1463 sc->transfer_state = TSTATE_IDLE; 1464 sc->transfer_cb(sc, sc->transfer_priv, residue, 1465 STATUS_CMD_OK); 1466 1467 return; 1468 } 1469 1470 /***** Bulk Reset *****/ 1471 case TSTATE_BBB_RESET1: 1472 if (err) 1473 printf("%s: BBB reset failed, %s\n", 1474 device_xname(sc->sc_dev), usbd_errstr(err)); 1475 1476 sc->transfer_state = TSTATE_BBB_RESET2; 1477 umass_clear_endpoint_stall(sc, UMASS_BULKIN, 1478 sc->transfer_xfer[XFER_BBB_RESET2]); 1479 1480 return; 1481 case TSTATE_BBB_RESET2: 1482 if (err) /* should not occur */ 1483 printf("%s: BBB bulk-in clear stall failed, %s\n", 1484 device_xname(sc->sc_dev), usbd_errstr(err)); 1485 /* no error recovery, otherwise we end up in a loop */ 1486 1487 sc->transfer_state = TSTATE_BBB_RESET3; 1488 umass_clear_endpoint_stall(sc, UMASS_BULKOUT, 1489 sc->transfer_xfer[XFER_BBB_RESET3]); 1490 1491 return; 1492 case TSTATE_BBB_RESET3: 1493 if (err) /* should not occur */ 1494 printf("%s: BBB bulk-out clear stall failed, %s\n", 1495 device_xname(sc->sc_dev), usbd_errstr(err)); 1496 /* no error recovery, otherwise we end up in a loop */ 1497 1498 sc->transfer_state = TSTATE_IDLE; 1499 if (sc->transfer_priv) { 1500 sc->transfer_cb(sc, sc->transfer_priv, 1501 sc->transfer_datalen, 1502 sc->transfer_status); 1503 } 1504 1505 return; 1506 1507 /***** Default *****/ 1508 default: 1509 panic("%s: Unknown state %d", 1510 device_xname(sc->sc_dev), sc->transfer_state); 1511 } 1512 } 1513 1514 /* 1515 * Command/Bulk/Interrupt (CBI) specific functions 1516 */ 1517 1518 Static int 1519 umass_cbi_adsc(struct umass_softc *sc, char *buffer, int buflen, int flags, 1520 struct usbd_xfer *xfer) 1521 { 1522 KASSERTMSG(sc->sc_wire & (UMASS_WPROTO_CBI|UMASS_WPROTO_CBI_I), 1523 "sc->sc_wire == 0x%02x wrong for umass_cbi_adsc\n", 1524 sc->sc_wire); 1525 1526 if ((sc->sc_cmd == UMASS_CPROTO_RBC) && 1527 (sc->sc_quirks & UMASS_QUIRK_RBC_PAD_TO_12) != 0 && buflen < 12) { 1528 (void)memset(buffer + buflen, 0, 12 - buflen); 1529 buflen = 12; 1530 } 1531 1532 sc->sc_req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1533 sc->sc_req.bRequest = UR_CBI_ADSC; 1534 USETW(sc->sc_req.wValue, 0); 1535 USETW(sc->sc_req.wIndex, sc->sc_ifaceno); 1536 USETW(sc->sc_req.wLength, buflen); 1537 return umass_setup_ctrl_transfer(sc, &sc->sc_req, buffer, 1538 buflen, flags, xfer); 1539 } 1540 1541 1542 Static void 1543 umass_cbi_reset(struct umass_softc *sc, int status) 1544 { 1545 UMASSHIST_FUNC(); UMASSHIST_CALLED(); 1546 int i; 1547 # define SEND_DIAGNOSTIC_CMDLEN 12 1548 1549 KASSERTMSG(sc->sc_wire & (UMASS_WPROTO_CBI|UMASS_WPROTO_CBI_I), 1550 "sc->sc_wire == 0x%02x wrong for umass_cbi_reset\n", 1551 sc->sc_wire); 1552 1553 if (sc->sc_dying) 1554 return; 1555 1556 /* 1557 * Command Block Reset Protocol 1558 * 1559 * First send a reset request to the device. Then clear 1560 * any possibly stalled bulk endpoints. 1561 1562 * This is done in 3 steps, states: 1563 * TSTATE_CBI_RESET1 1564 * TSTATE_CBI_RESET2 1565 * TSTATE_CBI_RESET3 1566 * 1567 * If the reset doesn't succeed, the device should be port reset. 1568 */ 1569 1570 DPRINTFM(UDMASS_CBI, "sc %#jx: CBI Reset", (uintptr_t)sc, 0, 0, 0); 1571 1572 /* CTASSERT */ 1573 KASSERTMSG(sizeof(sc->cbl) >= SEND_DIAGNOSTIC_CMDLEN, 1574 "%s: CBL struct is too small (%zu < %u)\n", 1575 device_xname(sc->sc_dev), 1576 sizeof(sc->cbl), SEND_DIAGNOSTIC_CMDLEN); 1577 1578 sc->transfer_state = TSTATE_CBI_RESET1; 1579 sc->transfer_status = status; 1580 1581 /* The 0x1d code is the SEND DIAGNOSTIC command. To distingiush between 1582 * the two the last 10 bytes of the cbl is filled with 0xff (section 1583 * 2.2 of the CBI spec). 1584 */ 1585 sc->cbl[0] = 0x1d; /* Command Block Reset */ 1586 sc->cbl[1] = 0x04; 1587 for (i = 2; i < SEND_DIAGNOSTIC_CMDLEN; i++) 1588 sc->cbl[i] = 0xff; 1589 1590 umass_cbi_adsc(sc, sc->cbl, SEND_DIAGNOSTIC_CMDLEN, 0, 1591 sc->transfer_xfer[XFER_CBI_RESET1]); 1592 /* XXX if the command fails we should reset the port on the bub */ 1593 } 1594 1595 Static void 1596 umass_cbi_transfer(struct umass_softc *sc, int lun, 1597 void *cmd, int cmdlen, void *data, int datalen, int dir, 1598 u_int timeout, int flags, umass_callback cb, void *priv) 1599 { 1600 UMASSHIST_FUNC(); UMASSHIST_CALLED(); 1601 1602 DPRINTFM(UDMASS_CBI, "sc %#jx: cmd=0x%02jx, len=%jd", 1603 (uintptr_t)sc, *(u_char *)cmd, datalen, 0); 1604 1605 KASSERTMSG(sc->sc_wire & (UMASS_WPROTO_CBI|UMASS_WPROTO_CBI_I), 1606 "sc->sc_wire == 0x%02x wrong for umass_cbi_transfer\n", 1607 sc->sc_wire); 1608 1609 if (sc->sc_dying) 1610 return; 1611 1612 /* Be a little generous. */ 1613 sc->timeout = timeout + USBD_DEFAULT_TIMEOUT; 1614 1615 /* 1616 * Do a CBI transfer with cmdlen bytes from cmd, possibly 1617 * a data phase of datalen bytes from/to the device and finally a 1618 * csw read phase. 1619 * If the data direction was inbound a maximum of datalen bytes 1620 * is stored in the buffer pointed to by data. 1621 * 1622 * umass_cbi_transfer initialises the transfer and lets the state 1623 * machine in umass_cbi_state handle the completion. It uses the 1624 * following states: 1625 * TSTATE_CBI_COMMAND 1626 * -> XXX fill in 1627 * 1628 * An error in any of those states will invoke 1629 * umass_cbi_reset. 1630 */ 1631 1632 /* check the given arguments */ 1633 KASSERTMSG(datalen == 0 || data != NULL, 1634 "%s: datalen > 0, but no buffer",device_xname(sc->sc_dev)); 1635 KASSERTMSG(datalen == 0 || dir != DIR_NONE, 1636 "%s: direction is NONE while datalen is not zero\n", 1637 device_xname(sc->sc_dev)); 1638 1639 /* store the details for the data transfer phase */ 1640 sc->transfer_dir = dir; 1641 sc->transfer_data = data; 1642 sc->transfer_datalen = datalen; 1643 sc->transfer_actlen = 0; 1644 sc->transfer_cb = cb; 1645 sc->transfer_priv = priv; 1646 sc->transfer_status = STATUS_CMD_OK; 1647 1648 /* move from idle to the command state */ 1649 sc->transfer_state = TSTATE_CBI_COMMAND; 1650 1651 /* Send the Command Block from host to device via control endpoint. */ 1652 if (umass_cbi_adsc(sc, cmd, cmdlen, flags, 1653 sc->transfer_xfer[XFER_CBI_CB])) 1654 umass_cbi_reset(sc, STATUS_WIRE_FAILED); 1655 } 1656 1657 Static void 1658 umass_cbi_state(struct usbd_xfer *xfer, void *priv, 1659 usbd_status err) 1660 { 1661 UMASSHIST_FUNC(); UMASSHIST_CALLED(); 1662 struct umass_softc *sc = (struct umass_softc *) priv; 1663 1664 KASSERTMSG(sc->sc_wire & (UMASS_WPROTO_CBI|UMASS_WPROTO_CBI_I), 1665 "sc->sc_wire == 0x%02x wrong for umass_cbi_state\n", 1666 sc->sc_wire); 1667 1668 if (err == USBD_CANCELLED) { 1669 DPRINTFM(UDMASS_BBB, "sc %#jx xfer %#jx cancelled", 1670 (uintptr_t)sc, (uintptr_t)xfer, 0, 0); 1671 sc->transfer_state = TSTATE_IDLE; 1672 sc->transfer_cb(sc, sc->transfer_priv, 0, STATUS_TIMEOUT); 1673 return; 1674 } 1675 1676 if (sc->sc_dying) 1677 return; 1678 1679 /* 1680 * State handling for CBI transfers. 1681 */ 1682 1683 DPRINTFM(UDMASS_CBI, "sc %#jx: Handling CBI state %jd, xfer=%#jx, ...", 1684 (uintptr_t)sc, sc->transfer_state, (uintptr_t)xfer, 0); 1685 DPRINTFM(UDMASS_CBI, "... err %jd", err, 0, 0, 0); 1686 1687 switch (sc->transfer_state) { 1688 1689 /***** CBI Transfer *****/ 1690 case TSTATE_CBI_COMMAND: 1691 if (err == USBD_STALLED) { 1692 DPRINTFM(UDMASS_CBI, "sc %#jx: Command Transport " 1693 "failed", (uintptr_t)sc, 0, 0, 0); 1694 /* Status transport by control pipe (section 2.3.2.1). 1695 * The command contained in the command block failed. 1696 * 1697 * The control pipe has already been unstalled by the 1698 * USB stack. 1699 * Section 2.4.3.1.1 states that the bulk in endpoints 1700 * should not stalled at this point. 1701 */ 1702 1703 sc->transfer_state = TSTATE_IDLE; 1704 sc->transfer_cb(sc, sc->transfer_priv, 1705 sc->transfer_datalen, 1706 STATUS_CMD_FAILED); 1707 1708 return; 1709 } else if (err) { 1710 DPRINTFM(UDMASS_CBI, "sc %#jx: failed to send ADSC", 1711 (uintptr_t)sc, 0, 0, 0); 1712 umass_cbi_reset(sc, STATUS_WIRE_FAILED); 1713 return; 1714 } 1715 1716 /* Data transport phase, setup transfer */ 1717 sc->transfer_state = TSTATE_CBI_DATA; 1718 if (sc->transfer_dir == DIR_IN) { 1719 if (umass_setup_transfer(sc, sc->sc_pipe[UMASS_BULKIN], 1720 sc->datain_buffer, sc->transfer_datalen, 1721 USBD_SHORT_XFER_OK, 1722 sc->transfer_xfer[XFER_CBI_DATAIN])) 1723 umass_cbi_reset(sc, STATUS_WIRE_FAILED); 1724 1725 return; 1726 } else if (sc->transfer_dir == DIR_OUT) { 1727 memcpy(sc->dataout_buffer, sc->transfer_data, 1728 sc->transfer_datalen); 1729 if (umass_setup_transfer(sc, sc->sc_pipe[UMASS_BULKOUT], 1730 sc->dataout_buffer, sc->transfer_datalen, 1731 0, /* fixed length transfer */ 1732 sc->transfer_xfer[XFER_CBI_DATAOUT])) 1733 umass_cbi_reset(sc, STATUS_WIRE_FAILED); 1734 1735 return; 1736 } else { 1737 DPRINTFM(UDMASS_CBI, "sc %#jx: no data phase", 1738 (uintptr_t)sc, 0, 0, 0); 1739 } 1740 1741 /* if no data phase, err == 0 */ 1742 /* FALLTHROUGH */ 1743 case TSTATE_CBI_DATA: 1744 /* Command transport phase error handling (ignored if no data 1745 * phase (fallthrough from previous state)) */ 1746 if (sc->transfer_dir != DIR_NONE) { 1747 /* retrieve the length of the transfer that was done */ 1748 usbd_get_xfer_status(xfer, NULL, NULL, 1749 &sc->transfer_actlen, NULL); 1750 DPRINTFM(UDMASS_CBI, "sc %#jx: CBI_DATA actlen=%jd", 1751 (uintptr_t)sc, sc->transfer_actlen, 0, 0); 1752 1753 if (err) { 1754 DPRINTFM(UDMASS_CBI, "sc %#jx: Data dir %jd " 1755 "err %d failed", 1756 (uintptr_t)sc, sc->transfer_dir, 1757 sc->transfer_datalen, err); 1758 1759 if (err == USBD_STALLED) { 1760 sc->transfer_state = TSTATE_CBI_DCLEAR; 1761 umass_clear_endpoint_stall(sc, 1762 (sc->transfer_dir == DIR_IN? 1763 UMASS_BULKIN:UMASS_BULKOUT), 1764 sc->transfer_xfer[XFER_CBI_DCLEAR]); 1765 } else { 1766 /* Unless the error is a pipe stall the 1767 * error is fatal. 1768 */ 1769 umass_cbi_reset(sc, STATUS_WIRE_FAILED); 1770 } 1771 return; 1772 } 1773 } 1774 1775 if (sc->transfer_dir == DIR_IN) 1776 memcpy(sc->transfer_data, sc->datain_buffer, 1777 sc->transfer_actlen); 1778 1779 DIF(UDMASS_CBI, if (sc->transfer_dir == DIR_IN) 1780 umass_dump_buffer(sc, sc->transfer_data, 1781 sc->transfer_actlen, 48)); 1782 1783 /* Status phase */ 1784 if (sc->sc_wire == UMASS_WPROTO_CBI_I) { 1785 sc->transfer_state = TSTATE_CBI_STATUS; 1786 memset(&sc->sbl, 0, sizeof(sc->sbl)); 1787 if (umass_setup_transfer(sc, sc->sc_pipe[UMASS_INTRIN], 1788 &sc->sbl, sizeof(sc->sbl), 1789 0, /* fixed length transfer */ 1790 sc->transfer_xfer[XFER_CBI_STATUS])) 1791 umass_cbi_reset(sc, STATUS_WIRE_FAILED); 1792 } else { 1793 /* No command completion interrupt. Request 1794 * sense to get status of command. 1795 */ 1796 sc->transfer_state = TSTATE_IDLE; 1797 sc->transfer_cb(sc, sc->transfer_priv, 1798 sc->transfer_datalen - sc->transfer_actlen, 1799 STATUS_CMD_UNKNOWN); 1800 } 1801 return; 1802 1803 case TSTATE_CBI_STATUS: 1804 if (err) { 1805 DPRINTFM(UDMASS_CBI, "sc %#jx: Status Transport failed", 1806 (uintptr_t)sc, 0, 0, 0); 1807 /* Status transport by interrupt pipe (section 2.3.2.2). 1808 */ 1809 1810 if (err == USBD_STALLED) { 1811 sc->transfer_state = TSTATE_CBI_SCLEAR; 1812 umass_clear_endpoint_stall(sc, UMASS_INTRIN, 1813 sc->transfer_xfer[XFER_CBI_SCLEAR]); 1814 } else { 1815 umass_cbi_reset(sc, STATUS_WIRE_FAILED); 1816 } 1817 return; 1818 } 1819 1820 /* Dissect the information in the buffer */ 1821 1822 { 1823 uint32_t actlen; 1824 usbd_get_xfer_status(xfer,NULL,NULL,&actlen,NULL); 1825 DPRINTFM(UDMASS_CBI, "sc %#jx: CBI_STATUS actlen=%jd", 1826 (uintptr_t)sc, actlen, 0, 0); 1827 if (actlen != 2) 1828 break; 1829 } 1830 1831 if (sc->sc_cmd == UMASS_CPROTO_UFI) { 1832 int status; 1833 1834 /* Section 3.4.3.1.3 specifies that the UFI command 1835 * protocol returns an ASC and ASCQ in the interrupt 1836 * data block. 1837 */ 1838 1839 DPRINTFM(UDMASS_CBI, "sc %#jx: UFI CCI, ASC = 0x%02jx, " 1840 "ASCQ = 0x%02jx", (uintptr_t)sc, sc->sbl.ufi.asc, 1841 sc->sbl.ufi.ascq, 0); 1842 1843 if ((sc->sbl.ufi.asc == 0 && sc->sbl.ufi.ascq == 0) || 1844 sc->sc_sense) 1845 status = STATUS_CMD_OK; 1846 else 1847 status = STATUS_CMD_FAILED; 1848 1849 /* No autosense, command successful */ 1850 sc->transfer_state = TSTATE_IDLE; 1851 sc->transfer_cb(sc, sc->transfer_priv, 1852 sc->transfer_datalen - sc->transfer_actlen, status); 1853 } else { 1854 int status; 1855 1856 /* Command Interrupt Data Block */ 1857 1858 DPRINTFM(UDMASS_CBI, "sc %#jx: type=0x%02jx, " 1859 "value=0x%02jx", (uintptr_t)sc, 1860 sc->sbl.common.type, sc->sbl.common.value, 0); 1861 1862 if (sc->sbl.common.type == IDB_TYPE_CCI) { 1863 switch (sc->sbl.common.value & IDB_VALUE_STATUS_MASK) { 1864 case IDB_VALUE_PASS: 1865 status = STATUS_CMD_OK; 1866 break; 1867 case IDB_VALUE_FAIL: 1868 case IDB_VALUE_PERSISTENT: 1869 status = STATUS_CMD_FAILED; 1870 break; 1871 case IDB_VALUE_PHASE: 1872 default: /* XXX: gcc */ 1873 status = STATUS_WIRE_FAILED; 1874 break; 1875 } 1876 1877 sc->transfer_state = TSTATE_IDLE; 1878 sc->transfer_cb(sc, sc->transfer_priv, 1879 sc->transfer_datalen - sc->transfer_actlen, 1880 status); 1881 } 1882 } 1883 return; 1884 1885 case TSTATE_CBI_DCLEAR: 1886 if (err) { /* should not occur */ 1887 printf("%s: CBI bulk-%s stall clear failed, %s\n", 1888 device_xname(sc->sc_dev), 1889 (sc->transfer_dir == DIR_IN? "in":"out"), 1890 usbd_errstr(err)); 1891 umass_cbi_reset(sc, STATUS_WIRE_FAILED); 1892 } else { 1893 sc->transfer_state = TSTATE_IDLE; 1894 sc->transfer_cb(sc, sc->transfer_priv, 1895 sc->transfer_datalen, STATUS_CMD_FAILED); 1896 } 1897 return; 1898 1899 case TSTATE_CBI_SCLEAR: 1900 if (err) { /* should not occur */ 1901 printf("%s: CBI intr-in stall clear failed, %s\n", 1902 device_xname(sc->sc_dev), usbd_errstr(err)); 1903 umass_cbi_reset(sc, STATUS_WIRE_FAILED); 1904 } else { 1905 sc->transfer_state = TSTATE_IDLE; 1906 sc->transfer_cb(sc, sc->transfer_priv, 1907 sc->transfer_datalen, STATUS_CMD_FAILED); 1908 } 1909 return; 1910 1911 /***** CBI Reset *****/ 1912 case TSTATE_CBI_RESET1: 1913 if (err) 1914 printf("%s: CBI reset failed, %s\n", 1915 device_xname(sc->sc_dev), usbd_errstr(err)); 1916 1917 sc->transfer_state = TSTATE_CBI_RESET2; 1918 umass_clear_endpoint_stall(sc, UMASS_BULKIN, 1919 sc->transfer_xfer[XFER_CBI_RESET2]); 1920 1921 return; 1922 case TSTATE_CBI_RESET2: 1923 if (err) /* should not occur */ 1924 printf("%s: CBI bulk-in stall clear failed, %s\n", 1925 device_xname(sc->sc_dev), usbd_errstr(err)); 1926 /* no error recovery, otherwise we end up in a loop */ 1927 1928 sc->transfer_state = TSTATE_CBI_RESET3; 1929 umass_clear_endpoint_stall(sc, UMASS_BULKOUT, 1930 sc->transfer_xfer[XFER_CBI_RESET3]); 1931 1932 return; 1933 case TSTATE_CBI_RESET3: 1934 if (err) /* should not occur */ 1935 printf("%s: CBI bulk-out stall clear failed, %s\n", 1936 device_xname(sc->sc_dev), usbd_errstr(err)); 1937 /* no error recovery, otherwise we end up in a loop */ 1938 1939 sc->transfer_state = TSTATE_IDLE; 1940 if (sc->transfer_priv) { 1941 sc->transfer_cb(sc, sc->transfer_priv, 1942 sc->transfer_datalen, 1943 sc->transfer_status); 1944 } 1945 1946 return; 1947 1948 1949 /***** Default *****/ 1950 default: 1951 panic("%s: Unknown state %d", 1952 device_xname(sc->sc_dev), sc->transfer_state); 1953 } 1954 } 1955 1956 usbd_status 1957 umass_bbb_get_max_lun(struct umass_softc *sc, uint8_t *maxlun) 1958 { 1959 UMASSHIST_FUNC(); UMASSHIST_CALLED(); 1960 usb_device_request_t req; 1961 usbd_status err; 1962 1963 *maxlun = 0; /* Default to 0. */ 1964 1965 DPRINTFM(UDMASS_BBB, "sc %#jx: Get Max Lun", (uintptr_t)sc, 0, 0, 0); 1966 1967 /* The Get Max Lun command is a class-specific request. */ 1968 req.bmRequestType = UT_READ_CLASS_INTERFACE; 1969 req.bRequest = UR_BBB_GET_MAX_LUN; 1970 USETW(req.wValue, 0); 1971 USETW(req.wIndex, sc->sc_ifaceno); 1972 USETW(req.wLength, 1); 1973 1974 err = usbd_do_request_flags(sc->sc_udev, &req, maxlun, 1975 USBD_SHORT_XFER_OK, 0, USBD_DEFAULT_TIMEOUT); 1976 switch (err) { 1977 case USBD_NORMAL_COMPLETION: 1978 DPRINTFM(UDMASS_BBB, "sc %#jx: Max Lun %jd", 1979 (uintptr_t)sc, *maxlun , 0, 0); 1980 break; 1981 1982 case USBD_STALLED: 1983 /* 1984 * Device doesn't support Get Max Lun request. 1985 */ 1986 err = USBD_NORMAL_COMPLETION; 1987 DPRINTFM(UDMASS_BBB, "sc %#jx: Get Max Lun not supported", 1988 (uintptr_t)sc, 0, 0, 0); 1989 break; 1990 1991 case USBD_SHORT_XFER: 1992 /* 1993 * XXX This must mean Get Max Lun is not supported, too! 1994 */ 1995 err = USBD_NORMAL_COMPLETION; 1996 DPRINTFM(UDMASS_BBB, "sc %#jx: Get Max Lun SHORT_XFER", 1997 (uintptr_t)sc, 0, 0, 0); 1998 break; 1999 2000 default: 2001 printf("%s: Get Max Lun failed: %s\n", 2002 device_xname(sc->sc_dev), usbd_errstr(err)); 2003 /* XXX Should we port_reset the device? */ 2004 break; 2005 } 2006 2007 return err; 2008 } 2009 2010 2011 2012 2013 #ifdef UMASS_DEBUG 2014 Static void 2015 umass_bbb_dump_cbw(struct umass_softc *sc, umass_bbb_cbw_t *cbw) 2016 { 2017 UMASSHIST_FUNC(); UMASSHIST_CALLED(); 2018 int clen = cbw->bCDBLength; 2019 int dlen = UGETDW(cbw->dCBWDataTransferLength); 2020 uint8_t *c = cbw->CBWCDB; 2021 int tag = UGETDW(cbw->dCBWTag); 2022 int flags = cbw->bCBWFlags; 2023 2024 DPRINTFM(UDMASS_BBB, "sc %#jx: CBW %jd: cmdlen=%jd", 2025 (uintptr_t)sc, tag, clen, 0); 2026 DPRINTFM(UDMASS_BBB, " 0x%02jx%02jx%02jx%02jx...", 2027 c[0], c[1], c[2], c[3]); 2028 DPRINTFM(UDMASS_BBB, " 0x%02jx%02jx%02jx%02jx...", 2029 c[4], c[5], c[6], c[7]); 2030 DPRINTFM(UDMASS_BBB, " 0x%02jx%02jx...", c[8], c[9], 0, 0); 2031 DPRINTFM(UDMASS_BBB, " data = %jd bytes, flags = %jx", dlen, flags, 0, 2032 0); 2033 } 2034 2035 Static void 2036 umass_bbb_dump_csw(struct umass_softc *sc, umass_bbb_csw_t *csw) 2037 { 2038 UMASSHIST_FUNC(); UMASSHIST_CALLED(); 2039 int sig = UGETDW(csw->dCSWSignature); 2040 int tag = UGETDW(csw->dCSWTag); 2041 int res = UGETDW(csw->dCSWDataResidue); 2042 int status = csw->bCSWStatus; 2043 2044 DPRINTFM(UDMASS_BBB, "sc %#jx: CSW %jd: sig = 0x%08jx, tag = %jd", 2045 (uintptr_t)sc, (uintptr_t)csw, sig, tag); 2046 DPRINTFM(UDMASS_BBB, " res = %jd, status = 0x%02jx", 2047 res, status, 0, 0); 2048 } 2049 2050 Static void 2051 umass_dump_buffer(struct umass_softc *sc, uint8_t *buffer, int buflen, 2052 int printlen) 2053 { 2054 UMASSHIST_FUNC(); UMASSHIST_CALLED(); 2055 int i; 2056 2057 DPRINTFM(UDMASS_GEN, "sc %#jx: buffer %#jx", (uintptr_t)sc, 2058 (uintptr_t)buffer, 0, 0); 2059 for (i = 0; i < buflen && i < printlen;) { 2060 if (i + 3 < buflen && i + 3 < printlen) { 2061 DPRINTFM(UDMASS_GEN, " 0x%02jx%02jx%02jx%02jx", 2062 buffer[i], buffer[i + 1], 2063 buffer[i + 2], buffer[i + 3]); 2064 i += 4; 2065 } else if (i + 2 < buflen && i + 2 < printlen) { 2066 DPRINTFM(UDMASS_GEN, " 0x%02jx%02jx%02jx", 2067 buffer[i], buffer[i + 1], buffer[i + 2], 0); 2068 i += 3; 2069 } else if (i + 1 < buflen && i + 2 < printlen) { 2070 DPRINTFM(UDMASS_GEN, " 0x%02jx%02jx", 2071 buffer[i], buffer[i + 1], 0, 0); 2072 i += 2; 2073 } else { 2074 DPRINTFM(UDMASS_GEN, " 0x%02jx", buffer[i], 0, 0, 0); 2075 i += 1; 2076 } 2077 } 2078 } 2079 #endif 2080
Indexes created Tue Sep 30 07:10:03 GMT 2025