umass.c revision 1.22
1 /* $NetBSD: umass.c,v 1.22 1999/11/12 00:34:58 augustss Exp $ */ 2 3 /*- 4 * Copyright (c) 1999 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Jason R. Thorpe. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. All advertising materials mentioning features or use of this software 19 * must display the following acknowledgement: 20 * This product includes software developed by the NetBSD 21 * Foundation, Inc. and its contributors. 22 * 4. Neither the name of The NetBSD Foundation nor the names of its 23 * contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 27 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 28 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 29 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 30 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 31 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 32 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 33 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 34 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 35 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 36 * POSSIBILITY OF SUCH DAMAGE. 37 */ 38 39 /*- 40 * Copyright (c) 1999 MAEKAWA Masahide <bishop (at) rr.iij4u.or.jp>, 41 * Nick Hibma <hibma (at) skylink.it> 42 * All rights reserved. 43 * 44 * Redistribution and use in source and binary forms, with or without 45 * modification, are permitted provided that the following conditions 46 * are met: 47 * 1. Redistributions of source code must retain the above copyright 48 * notice, this list of conditions and the following disclaimer. 49 * 2. Redistributions in binary form must reproduce the above copyright 50 * notice, this list of conditions and the following disclaimer in the 51 * documentation and/or other materials provided with the distribution. 52 * 53 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 54 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 55 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 56 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 57 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 58 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 59 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 60 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 61 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 62 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 63 * SUCH DAMAGE. 64 * 65 * FreeBSD: src/sys/dev/usb/umass.c,v 1.8 1999/06/20 15:46:13 n_hibma Exp 66 */ 67 68 /* 69 * Universal Serial Bus Mass Storage Class Control/Interrupt/Bulk (CBI) 70 * Specification: 71 * 72 * http://www.usb.org/developers/data/usbmass-cbi10.pdf 73 * 74 * Universal Serial Bus Mass Storage Bulk Only 1.0rc4 Specification: 75 * 76 * http://www.usb.org/developers/data/usbmassbulk_10rc4.pdf 77 * 78 * Relevant parts of the old spec (Bulk-only 0.9) have been quoted 79 * in the source. 80 */ 81 82 /* To do: 83 * x The umass_usb_transfer routine uses synchroneous transfers. This 84 * should be changed to async and state handling. 85 * 86 * x Should handle more than just Iomega USB Zip drives. There are 87 * a fair number of USB->SCSI dongles out there. 88 * 89 * x Need to implement SCSI command timeout/abort handling. 90 * 91 * x Add support for other than Bulk. 92 * 93 * x Add support for other than SCSI. 94 */ 95 96 /* Authors: (with short acronyms for comments) 97 * NWH - Nick Hibma <hibma (at) skylink.it> 98 * JRT - Jason R. Thorpe <thorpej (at) shagadelic.org> 99 */ 100 101 #include <sys/param.h> 102 #include <sys/systm.h> 103 #include <sys/kernel.h> 104 #include <sys/malloc.h> 105 #include <sys/device.h> 106 #include <sys/buf.h> 107 #include <sys/proc.h> 108 109 #include <dev/usb/usb.h> 110 #include <dev/usb/usbdi.h> 111 #include <dev/usb/usbdi_util.h> 112 113 #include <dev/scsipi/scsi_all.h> 114 #include <dev/scsipi/scsipi_all.h> 115 #include <dev/scsipi/scsiconf.h> 116 117 #if defined(USB_DEBUG) && !defined(UMASS_DEBUG) 118 #define UMASS_DEBUG 1 119 #endif 120 121 #ifdef UMASS_DEBUG 122 #define DPRINTF(m, x) if (umassdebug & (m)) logprintf x 123 #define UDMASS_SCSI 0x00020000 124 #define UDMASS_USB 0x00040000 125 #define UDMASS_BULK 0x00080000 126 #define UDMASS_ALL 0xffff0000 127 int umassdebug = /* UDMASS_SCSI|UDMASS_BULK|UDMASS_USB */ 0; 128 #else 129 #define DPRINTF(m, x) 130 #endif 131 132 typedef struct umass_softc { 133 USBBASEDEVICE sc_dev; /* base device */ 134 usbd_interface_handle sc_iface; /* the interface we use */ 135 136 u_int8_t sc_subclass; /* our USB subclass */ 137 u_int8_t sc_protocol; /* our USB protocol */ 138 139 u_int8_t sc_bulkout; /* bulk-out Endpoint Address */ 140 usbd_pipe_handle sc_bulkout_pipe; 141 u_int8_t sc_bulkin; /* bulk-in Endpoint Address */ 142 usbd_pipe_handle sc_bulkin_pipe; 143 144 struct scsipi_link sc_link; /* prototype for devs */ 145 struct scsipi_adapter sc_adapter; 146 147 device_ptr_t sc_child; /* child device, for detach */ 148 149 int sc_refcnt; 150 char sc_dying; 151 } umass_softc_t; 152 153 #define USBD_COMMAND_FAILED USBD_INVAL /* redefine some errors for */ 154 155 #define UMASS_SCSIID_HOST 0x00 156 #define UMASS_SCSIID_DEVICE 0x01 157 158 #define DIR_OUT 0 159 #define DIR_IN 1 160 #define DIR_NONE 2 161 162 /* Bulk-Only specific request */ 163 #define UR_RESET 0xff 164 #define UR_GET_MAX_LUN 0xfe 165 166 /* Bulk-Only Mass Storage features */ 167 /* Command Block Wrapper */ 168 typedef struct { 169 uDWord dCBWSignature; 170 #define CBWSIGNATURE 0x43425355 171 uDWord dCBWTag; 172 uDWord dCBWDataTransferLength; 173 uByte bCBWFlags; 174 #define CBWFLAGS_OUT 0x00 175 #define CBWFLAGS_IN 0x80 176 uByte bCBWLUN; 177 uByte bCDBLength; 178 uByte CBWCDB[16]; 179 } usb_bulk_cbw_t; 180 #define USB_BULK_CBW_SIZE 31 181 182 /* Command Status Wrapper */ 183 typedef struct { 184 uDWord dCSWSignature; 185 #define CSWSIGNATURE 0x53425355 186 uDWord dCSWTag; 187 uDWord dCSWDataResidue; 188 uByte bCSWStatus; 189 #define CSWSTATUS_GOOD 0x0 190 #define CSWSTATUS_FAILED 0x1 191 #define CSWSTATUS_PHASE 0x2 192 } usb_bulk_csw_t; 193 #define USB_BULK_CSW_SIZE 13 194 195 196 USB_DECLARE_DRIVER(umass); 197 198 /* USB related functions */ 199 usbd_status umass_usb_transfer __P((umass_softc_t *, 200 usbd_pipe_handle pipe, 201 void *buf, int buflen, 202 int flags, int *xfer_size)); 203 204 /* Bulk-Only related functions */ 205 usbd_status umass_bulk_reset __P((umass_softc_t *sc)); 206 usbd_status umass_bulk_get_max_lun __P((umass_softc_t *sc, u_int8_t *maxlun)); 207 usbd_status umass_bulk_transfer __P((umass_softc_t *sc, int lun, 208 void *cmd, int cmdlen, 209 void *data, int datalen, 210 int dir, int *residue)); 211 212 /* SCSIPI related functions */ 213 struct scsipi_device umass_dev = { 214 NULL, /* Use default error handler */ 215 NULL, /* have a queue, served by this */ 216 NULL, /* have no async handler */ 217 NULL, /* Use default `done' routine */ 218 }; 219 220 void umass_scsipi_minphys __P((struct buf *)); 221 int umass_scsipi_scsi_cmd __P((struct scsipi_xfer *)); 222 223 224 225 USB_MATCH(umass) 226 { 227 USB_MATCH_START(umass, uaa); 228 usb_interface_descriptor_t *id; 229 230 if (uaa->iface == NULL) 231 return(UMATCH_NONE); 232 233 id = usbd_get_interface_descriptor(uaa->iface); 234 if (id != NULL 235 && id->bInterfaceClass == UCLASS_MASS 236 && id->bInterfaceSubClass == USUBCLASS_SCSI 237 && id->bInterfaceProtocol == UPROTO_MASS_BULK_P) 238 return(UMATCH_IFACECLASS_IFACESUBCLASS_IFACEPROTO); 239 240 return(UMATCH_NONE); 241 } 242 243 USB_ATTACH(umass) 244 { 245 USB_ATTACH_START(umass, sc, uaa); 246 usb_interface_descriptor_t *id; 247 usb_endpoint_descriptor_t *ed; 248 char devinfo[1024]; 249 usbd_status err; 250 int i; 251 u_int8_t maxlun; 252 const char *subclass, *protocol; 253 254 sc->sc_iface = uaa->iface; 255 sc->sc_bulkout_pipe = NULL; 256 sc->sc_bulkin_pipe = NULL; 257 258 usbd_devinfo(uaa->device, 0, devinfo); 259 USB_ATTACH_SETUP; 260 261 id = usbd_get_interface_descriptor(sc->sc_iface); 262 263 sc->sc_subclass = id->bInterfaceSubClass; 264 sc->sc_protocol = id->bInterfaceProtocol; 265 266 switch (sc->sc_subclass) { 267 #if 0 268 case USUBCLASS_RBC: subclass = "RBC"; break; 269 case USUBCLASS_SFF8020I: subclass = "8020i"; break; 270 case USUBCLASS_QIC157: subclass = "QIC157"; break; 271 case USUBCLASS_UFI: subclass = "UFI"; break; 272 case USUBCLASS_SFF8070I: subclass = "8070i"; break; 273 #endif 274 case USUBCLASS_SCSI: subclass = "SCSI"; break; 275 default: 276 panic("umass_attach: impossible subclass"); 277 } 278 279 switch (sc->sc_protocol) { 280 #if 0 281 case UPROTO_MASS_CBI_I: protocol = "CBI with CCI"; break; 282 case UPROTO_MASS_CBI: protocol = "CBI"; break; 283 #endif 284 case UPROTO_MASS_BULK: /* XXX Is this really right? */ 285 case UPROTO_MASS_BULK_P: protocol = "Bulk-Only"; break; 286 default: 287 panic("umass_attach: impossible protocol"); 288 } 289 290 printf("%s: %s\n", USBDEVNAME(sc->sc_dev), devinfo); 291 printf("%s: %s over %s (iclass %d/%d/%d)\n", USBDEVNAME(sc->sc_dev), 292 subclass, protocol, id->bInterfaceClass, id->bInterfaceSubClass, 293 id->bInterfaceProtocol); 294 295 /* 296 * A Bulk-Only Mass Storage device supports the following endpoints, 297 * in addition to the Endpoint 0 for Control transfer that is required 298 * of all USB devices: 299 * (a) bulk-in endpoint. 300 * (b) bulk-out endpoint. 301 * 302 * The endpoint addresses are not fixed, so we have to read them 303 * from the device descriptors of the current interface. 304 */ 305 for (i = 0 ; i < id->bNumEndpoints ; i++) { 306 ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i); 307 if (ed == NULL) { 308 printf("%s: could not read endpoint descriptor\n", 309 USBDEVNAME(sc->sc_dev)); 310 USB_ATTACH_ERROR_RETURN; 311 } 312 if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN 313 && (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) { 314 sc->sc_bulkin = ed->bEndpointAddress; 315 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT 316 && (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) { 317 sc->sc_bulkout = ed->bEndpointAddress; 318 } 319 } 320 321 /* 322 * Get the maximum LUN supported by the device. 323 */ 324 err = umass_bulk_get_max_lun(sc, &maxlun); 325 if (err) { 326 printf("%s: unable to get Max Lun: %s\n", 327 USBDEVNAME(sc->sc_dev), usbd_errstr(err)); 328 USB_ATTACH_ERROR_RETURN; 329 } 330 331 /* Open the bulk-in and -out pipe */ 332 err = usbd_open_pipe(sc->sc_iface, sc->sc_bulkout, 333 USBD_EXCLUSIVE_USE, &sc->sc_bulkout_pipe); 334 if (err) { 335 DPRINTF(UDMASS_USB,("cannot open bulk out pipe (address %d)\n", 336 sc->sc_bulkout)); 337 USB_ATTACH_ERROR_RETURN; 338 } 339 err = usbd_open_pipe(sc->sc_iface, sc->sc_bulkin, 340 USBD_EXCLUSIVE_USE, &sc->sc_bulkin_pipe); 341 if (err) { 342 DPRINTF(UDMASS_USB,("cannot open bulk in pipe (address %d)\n", 343 sc->sc_bulkin)); 344 usbd_close_pipe(sc->sc_bulkout_pipe); 345 USB_ATTACH_ERROR_RETURN; 346 } 347 348 /* attach the device to the SCSIPI layer */ 349 sc->sc_adapter.scsipi_cmd = umass_scsipi_scsi_cmd; 350 sc->sc_adapter.scsipi_minphys = umass_scsipi_minphys; 351 352 sc->sc_link.scsipi_scsi.channel = SCSI_CHANNEL_ONLY_ONE; 353 sc->sc_link.adapter_softc = sc; 354 sc->sc_link.scsipi_scsi.adapter_target = UMASS_SCSIID_HOST; 355 sc->sc_link.adapter = &sc->sc_adapter; 356 sc->sc_link.device = &umass_dev; 357 sc->sc_link.openings = 1; 358 sc->sc_link.scsipi_scsi.max_target = UMASS_SCSIID_DEVICE; /* XXX */ 359 sc->sc_link.scsipi_scsi.max_lun = maxlun; 360 sc->sc_link.type = BUS_SCSI; 361 362 sc->sc_child = config_found(&sc->sc_dev, &sc->sc_link, scsiprint); 363 if (sc->sc_child == NULL) { 364 usbd_close_pipe(sc->sc_bulkout_pipe); 365 usbd_close_pipe(sc->sc_bulkin_pipe); 366 /* XXX Not really an error. */ 367 USB_ATTACH_ERROR_RETURN; 368 } 369 370 USB_ATTACH_SUCCESS_RETURN; 371 } 372 373 int 374 umass_activate(self, act) 375 struct device *self; 376 enum devact act; 377 { 378 struct umass_softc *sc = (struct umass_softc *) self; 379 int s, rv = 0; 380 381 DPRINTF(UDMASS_USB, ("%s: umass_activate: %d\n", 382 USBDEVNAME(sc->sc_dev), act)); 383 384 s = splhigh(); 385 switch (act) { 386 case DVACT_ACTIVATE: 387 rv = EOPNOTSUPP; 388 break; 389 390 case DVACT_DEACTIVATE: 391 if (sc->sc_child == NULL || sc->sc_dying) 392 break; 393 rv = config_deactivate(sc->sc_child); 394 DPRINTF(UDMASS_USB, ("%s: umass_activate: child " 395 "returned %d\n", USBDEVNAME(sc->sc_dev), rv)); 396 if (rv == 0) 397 sc->sc_dying = 1; 398 break; 399 } 400 splx(s); 401 return (rv); 402 } 403 404 USB_DETACH(umass) 405 { 406 USB_DETACH_START(umass, sc); 407 int s, rv = 0; 408 409 DPRINTF(UDMASS_USB, ("%s: umass_detach: flags 0x%x\n", 410 USBDEVNAME(sc->sc_dev), flags)); 411 412 if (sc->sc_child != NULL) 413 rv = config_detach(sc->sc_child, flags); 414 415 if (rv != 0) 416 return (rv); 417 418 /* Abort the pipes to wake up any waiting processes. */ 419 if (sc->sc_bulkin_pipe != NULL) 420 usbd_abort_pipe(sc->sc_bulkin_pipe); 421 if (sc->sc_bulkout_pipe != NULL) 422 usbd_abort_pipe(sc->sc_bulkout_pipe); 423 424 s = splusb(); 425 if (--sc->sc_refcnt >= 0) { 426 /* Wait for processes to go away. */ 427 usb_detach_wait(USBDEV(sc->sc_dev)); 428 } 429 splx(s); 430 431 if (sc->sc_bulkin_pipe != NULL) { 432 usbd_close_pipe(sc->sc_bulkin_pipe); 433 sc->sc_bulkin_pipe = NULL; 434 } 435 if (sc->sc_bulkout_pipe != NULL) { 436 usbd_close_pipe(sc->sc_bulkout_pipe); 437 sc->sc_bulkout_pipe = NULL; 438 } 439 440 return (rv); 441 } 442 443 /* Performs a request over a pipe. 444 * 445 * flags: Can be set to USBD_SHORT_XFER_OK 446 * xfer_size: if not null returns the nr. of bytes transferred 447 * 448 * If the returned error is USBD_STALLED the pipe stall has 449 * been cleared again. 450 */ 451 452 usbd_status 453 umass_usb_transfer(umass_softc_t *sc, usbd_pipe_handle pipe, 454 void *buf, int buflen, int flags, int *xfer_size) 455 { 456 usbd_xfer_handle xfer; 457 usbd_private_handle priv; 458 void *buffer; 459 int size; 460 usbd_status err; 461 462 /* A transfer is done synchronously. We create and schedule the 463 * transfer and then wait for it to complete 464 */ 465 466 xfer = usbd_alloc_request(usbd_pipe2device_handle(pipe)); 467 if (xfer == NULL) { 468 DPRINTF(UDMASS_USB, ("%s: not enough memory\n", 469 USBDEVNAME(sc->sc_dev))); 470 return USBD_NOMEM; 471 } 472 473 usbd_setup_request(xfer, pipe, 0, buf, buflen,flags, 3000/*ms*/, NULL); 474 err = usbd_sync_transfer(xfer); 475 if (err) { 476 DPRINTF(UDMASS_USB, ("%s: transfer failed: %s\n", 477 USBDEVNAME(sc->sc_dev), usbd_errstr(err))); 478 usbd_free_request(xfer); 479 return(err); 480 } 481 482 usbd_get_request_status(xfer, &priv, &buffer, &size, &err); 483 484 if (xfer_size != NULL) 485 *xfer_size = size; 486 487 usbd_free_request(xfer); 488 return(USBD_NORMAL_COMPLETION); 489 } 490 491 usbd_status 492 umass_bulk_get_max_lun(umass_softc_t *sc, u_int8_t *maxlun) 493 { 494 usbd_device_handle dev; 495 usb_device_request_t req; 496 usbd_status err; 497 usb_interface_descriptor_t *id; 498 499 *maxlun = 0; /* Default to 0. */ 500 501 DPRINTF(UDMASS_BULK, ("%s: Get Max Lun\n", USBDEVNAME(sc->sc_dev))); 502 503 usbd_interface2device_handle(sc->sc_iface, &dev); 504 id = usbd_get_interface_descriptor(sc->sc_iface); 505 506 /* The Get Max Lun command is a class-specific request. */ 507 req.bmRequestType = UT_READ_CLASS_INTERFACE; 508 req.bRequest = UR_GET_MAX_LUN; 509 USETW(req.wValue, 0); 510 USETW(req.wIndex, id->bInterfaceNumber); 511 USETW(req.wLength, 1); 512 513 err = usbd_do_request(dev, &req, maxlun); 514 switch (err) { 515 case USBD_NORMAL_COMPLETION: 516 DPRINTF(UDMASS_BULK, ("%s: Max Lun %d\n", 517 USBDEVNAME(sc->sc_dev), *maxlun)); 518 break; 519 520 case USBD_STALLED: 521 /* 522 * Device doesn't support Get Max Lun request. 523 */ 524 err = USBD_NORMAL_COMPLETION; 525 DPRINTF(UDMASS_BULK, ("%s: Get Max Lun not supported\n", 526 USBDEVNAME(sc->sc_dev))); 527 break; 528 529 case USBD_SHORT_XFER: 530 /* 531 * XXX This must mean Get Max Lun is not supported, too! 532 */ 533 err = USBD_NORMAL_COMPLETION; 534 DPRINTF(UDMASS_BULK, ("%s: Get Max Lun SHORT_XFER\n", 535 USBDEVNAME(sc->sc_dev))); 536 break; 537 538 default: 539 printf("%s: Get Max Lun failed: %s\n", 540 USBDEVNAME(sc->sc_dev), usbd_errstr(err)); 541 /* XXX Should we port_reset the device? */ 542 break; 543 } 544 545 return (err); 546 } 547 548 usbd_status 549 umass_bulk_reset(umass_softc_t *sc) 550 { 551 usbd_device_handle dev; 552 usb_device_request_t req; 553 usbd_status err; 554 usb_interface_descriptor_t *id; 555 556 /* 557 * Reset recovery (5.3.4 in Universal Serial Bus Mass Storage Class) 558 * 559 * For Reset Recovery the host shall issue in the following order: 560 * a) a Bulk-Only Mass Storage Reset 561 * b) a Clear Feature HALT to the Bulk-In endpoint 562 * c) a Clear Feature HALT to the Bulk-Out endpoint 563 */ 564 565 DPRINTF(UDMASS_BULK, ("%s: Reset\n", 566 USBDEVNAME(sc->sc_dev))); 567 568 usbd_interface2device_handle(sc->sc_iface, &dev); 569 id = usbd_get_interface_descriptor(sc->sc_iface); 570 571 /* the reset command is a class specific interface request */ 572 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 573 req.bRequest = UR_RESET; 574 USETW(req.wValue, 0); 575 USETW(req.wIndex, id->bInterfaceNumber); 576 USETW(req.wLength, 0); 577 578 err = usbd_do_request(dev, &req, 0); 579 if (err) { 580 printf("%s: Reset failed, %s\n", 581 USBDEVNAME(sc->sc_dev), usbd_errstr(err)); 582 /* XXX we should port_reset the device */ 583 return(err); 584 } 585 586 usbd_clear_endpoint_stall(sc->sc_bulkout_pipe); 587 usbd_clear_endpoint_stall(sc->sc_bulkin_pipe); 588 589 #if 0 590 /* 591 * XXX we should convert this into a more friendly delay. 592 * Perhaps a tsleep (or is this routine run from int context?) 593 */ 594 595 DELAY(2500000 /*us*/); 596 #else 597 usbd_delay_ms(dev, 2500); 598 #endif 599 600 return(USBD_NORMAL_COMPLETION); 601 } 602 603 /* 604 * Do a Bulk-Only transfer with cmdlen bytes from cmd, possibly 605 * a data phase of datalen bytes from/to data and finally a csw read 606 * phase. 607 * 608 * If the data direction was inbound a maximum of datalen bytes 609 * is stored in the buffer pointed to by data. 610 * The status returned is USBD_NORMAL_COMPLETION, 611 * USBD_IOERROR, USBD_COMMAND_FAILED. 612 * In the last case *residue is set to the residue from the CSW, 613 * otherwise to 0. 614 * 615 * For the functionality of this subroutine see the Mass Storage 616 * Spec., the graphs on page 14 and page 19 and beyong (v0.9 of 617 * the spec). 618 */ 619 620 usbd_status 621 umass_bulk_transfer(umass_softc_t *sc, int lun, void *cmd, int cmdlen, 622 void *data, int datalen, int dir, int *residue) 623 { 624 static int dCBWtag = 42; /* tag to be used in transfers, 625 * incremented at each transfer */ 626 usb_bulk_cbw_t cbw; /* command block wrapper struct */ 627 usb_bulk_csw_t csw; /* command status wrapper struct */ 628 u_int32_t n = 0; /* number of bytes transported */ 629 usbd_status err; 630 631 #ifdef UMASS_DEBUG 632 u_int8_t *c = cmd; 633 634 /* check the given arguments */ 635 if (data == NULL && datalen > 0) { /* no buffer for transfer */ 636 DPRINTF(UDMASS_BULK, ("%s: no buffer, but datalen > 0 !\n", 637 USBDEVNAME(sc->sc_dev))); 638 return USBD_IOERROR; 639 } 640 641 DPRINTF(UDMASS_BULK, ("%s: cmd: %d bytes (0x%02x%02x%02x%02x%02x%02x%s)" 642 ", data: %d bytes, dir: %s\n", 643 USBDEVNAME(sc->sc_dev), 644 cmdlen, c[0], c[1], c[2], c[3], c[4], c[5], 645 (cmdlen > 6? "...":""), 646 datalen, (dir == DIR_IN? "in":"out"))); 647 #endif 648 649 if (dir == DIR_NONE || datalen == 0) { /* make sure they correspond */ 650 datalen = 0; 651 dir = DIR_NONE; 652 } 653 654 if (residue != NULL) 655 *residue = 0; /* reset residue */ 656 657 /* 658 * Determine the direction of transferring data and data length. 659 * 660 * dCBWDataTransferLength (datalen) : 661 * This field indicates the number of bytes of data that the host 662 * intends to transfer on the IN or OUT Bulk endpoint(as indicated by 663 * the Direction bit) during the execution of this command. If this 664 * field is set to 0, the device will expect that no data will be 665 * transferred IN or OUT during this command, regardless of the value 666 * of the Direction bit defined in dCBWFlags. 667 * 668 * dCBWFlags (dir) : 669 * The bits of the Flags field are defined as follows: 670 * Bits 0-6 reserved 671 * Bit 7 Direction - this bit shall be ignored if the 672 * dCBWDataTransferLength field is zero. 673 * 0 = data Out from host to device 674 * 1 = data In from device to host 675 */ 676 677 678 /* 679 * Command transport phase 680 */ 681 682 /* Fill in the Command Block Wrapper */ 683 USETDW(cbw.dCBWSignature, CBWSIGNATURE); 684 USETDW(cbw.dCBWTag, dCBWtag++); 685 USETDW(cbw.dCBWDataTransferLength, datalen); 686 /* we do not check for DIR_NONE below (see text on dCBWFlags above) */ 687 cbw.bCBWFlags = (dir == DIR_IN? CBWFLAGS_IN:CBWFLAGS_OUT); 688 cbw.bCBWLUN = lun; 689 cbw.bCDBLength = cmdlen; 690 bcopy(cmd, cbw.CBWCDB, cmdlen); 691 692 /* Send the CBW from host to device via bulk-out endpoint. */ 693 err = umass_usb_transfer(sc, sc->sc_bulkout_pipe, 694 &cbw, USB_BULK_CBW_SIZE, 0, NULL); 695 if (err) { 696 DPRINTF(UDMASS_BULK, ("%s: failed to send CBW\n", 697 USBDEVNAME(sc->sc_dev))); 698 /* If the device detects that the CBW is invalid, then the 699 * device may STALL both bulk endpoints and require a 700 * Bulk-Only MS Reset 701 */ 702 if (!sc->sc_dying) 703 umass_bulk_reset(sc); 704 return(USBD_IOERROR); 705 } 706 707 708 /* 709 * Data transport phase (only if there is data to be sent/received) 710 */ 711 712 if (dir == DIR_IN) { 713 /* we allow short transfers for bulk-in pipes */ 714 err = umass_usb_transfer(sc, sc->sc_bulkin_pipe, 715 data, datalen, 716 USBD_SHORT_XFER_OK, &n); 717 if (err) 718 DPRINTF(UDMASS_BULK, ("%s: failed to receive data, " 719 "(%d bytes, n = %d), %s\n", 720 USBDEVNAME(sc->sc_dev), 721 datalen, n, usbd_errstr(err))); 722 } else if (dir == DIR_OUT) { 723 err = umass_usb_transfer(sc, sc->sc_bulkout_pipe, 724 data, datalen, 0, &n); 725 if (err) 726 DPRINTF(UDMASS_BULK, ("%s: failed to send data, " 727 "(%d bytes, n = %d), %s\n", 728 USBDEVNAME(sc->sc_dev), 729 datalen, n, usbd_errstr(err))); 730 } 731 if (err && err != USBD_STALLED) 732 return(USBD_IOERROR); 733 734 735 /* 736 * Status transport phase 737 */ 738 739 /* Read the Command Status Wrapper via bulk-in endpoint. */ 740 err = umass_usb_transfer(sc, sc->sc_bulkin_pipe, 741 &csw, USB_BULK_CSW_SIZE, 0, NULL); 742 /* Try again if the bulk-in pipe was stalled */ 743 if (err == USBD_STALLED) { 744 err = usbd_clear_endpoint_stall(sc->sc_bulkin_pipe); 745 if (!err) { 746 err = umass_usb_transfer(sc, sc->sc_bulkin_pipe, 747 &csw, USB_BULK_CSW_SIZE, 0, NULL); 748 } 749 } 750 if (err && err != USBD_STALLED) 751 return(USBD_IOERROR); 752 753 /* 754 * Check the CSW for status and validity, and check for fatal errors 755 */ 756 757 /* Invalid CSW: Wrong signature or wrong tag might indicate 758 * that the device is confused -> reset it. 759 * Other fatal errors: STALL on read of CSW and Phase error 760 * or unknown status. 761 */ 762 if (err == USBD_STALLED 763 || UGETDW(csw.dCSWSignature) != CSWSIGNATURE 764 || UGETDW(csw.dCSWTag) != UGETDW(cbw.dCBWTag) 765 || csw.bCSWStatus == CSWSTATUS_PHASE 766 || csw.bCSWStatus > CSWSTATUS_PHASE) { 767 if (err) { 768 printf("%s: failed to read CSW, %s\n", 769 USBDEVNAME(sc->sc_dev), usbd_errstr(err)); 770 } else if (csw.bCSWStatus == CSWSTATUS_PHASE) { 771 printf("%s: Phase Error, residue = %d, n = %d\n", 772 USBDEVNAME(sc->sc_dev), 773 UGETDW(csw.dCSWDataResidue), n); 774 } else if (csw.bCSWStatus > CSWSTATUS_PHASE) { 775 printf("%s: Unknown status %d in CSW\n", 776 USBDEVNAME(sc->sc_dev), csw.bCSWStatus); 777 } else { 778 printf("%s: invalid CSW, sig = 0x%08x, tag = %d (!= %d)\n", 779 USBDEVNAME(sc->sc_dev), 780 UGETDW(csw.dCSWSignature), 781 UGETDW(csw.dCSWTag), UGETDW(cbw.dCBWTag)); 782 } 783 umass_bulk_reset(sc); 784 return(USBD_IOERROR); 785 } 786 787 if (csw.bCSWStatus == CSWSTATUS_FAILED) { 788 DPRINTF(UDMASS_BULK, ("%s: Command Failed, " 789 "residue = %d, n = %d\n", 790 USBDEVNAME(sc->sc_dev), 791 UGETDW(csw.dCSWDataResidue), n)); 792 if (residue != NULL) 793 *residue = UGETDW(csw.dCSWDataResidue); 794 return(USBD_COMMAND_FAILED); 795 } 796 797 /* 798 * XXX a residue not equal to 0 might indicate that something 799 * is wrong. Does CAM high level drivers check this for us? 800 */ 801 802 return(USBD_NORMAL_COMPLETION); 803 } 804 805 806 /* 807 * SCSIPI specific functions 808 */ 809 810 int 811 umass_scsipi_scsi_cmd(xs) 812 struct scsipi_xfer *xs; 813 { 814 struct scsipi_link *sc_link = xs->sc_link; 815 struct umass_softc *sc = sc_link->adapter_softc; 816 int residue, dir; 817 usbd_status err; 818 struct scsipi_sense sense_cmd; 819 820 DPRINTF(UDMASS_SCSI, ("%s: umass_scsi_cmd %d:%d\n", 821 USBDEVNAME(sc->sc_dev), 822 sc_link->scsipi_scsi.target, sc_link->scsipi_scsi.lun)); 823 824 if (sc->sc_dying) { 825 xs->xs_status |= XS_STS_DONE; 826 xs->error = XS_DRIVER_STUFFUP; 827 scsipi_done(xs); 828 if (xs->xs_control & XS_CTL_POLL) 829 return (SUCCESSFULLY_QUEUED); 830 else 831 return (COMPLETE); 832 } 833 834 #ifdef UMASS_DEBUG 835 if (sc_link->scsipi_scsi.target != UMASS_SCSIID_DEVICE) { 836 DPRINTF(UDMASS_SCSI, ("%s: Wrong SCSI ID %d\n", 837 USBDEVNAME(sc->sc_dev), 838 sc_link->scsipi_scsi.target)); 839 xs->error = XS_DRIVER_STUFFUP; 840 return (COMPLETE); 841 } 842 #endif 843 844 dir = DIR_NONE; 845 if (xs->datalen) { 846 switch (xs->xs_control & (XS_CTL_DATA_IN|XS_CTL_DATA_OUT)) { 847 case XS_CTL_DATA_IN: 848 dir = DIR_IN; 849 break; 850 case XS_CTL_DATA_OUT: 851 dir = DIR_OUT; 852 break; 853 } 854 } 855 856 /* Make sure we don't lose our softc. */ 857 sc->sc_refcnt++; 858 859 err = umass_bulk_transfer(sc, sc_link->scsipi_scsi.lun, 860 xs->cmd, xs->cmdlen, xs->data, xs->datalen, dir, &residue); 861 862 /* 863 * FAILED commands are supposed to be SCSI failed commands 864 * and are therefore considered to be successfull CDW/CSW 865 * transfers. PHASE errors are more serious and should return 866 * an error to the SCSIPI system. 867 * 868 * XXX This is however more based on empirical evidence than on 869 * hard proof from the Bulk-Only spec. 870 */ 871 if (err == USBD_NORMAL_COMPLETION) { 872 xs->error = XS_NOERROR; 873 } else if (sc->sc_dying) { 874 /* We are being detached, no use talking to the device. */ 875 xs->error = XS_DRIVER_STUFFUP; 876 } else { 877 DPRINTF(UDMASS_USB|UDMASS_SCSI, ("%s: bulk transfer completed " 878 "with error %s\n", USBDEVNAME(sc->sc_dev), 879 usbd_errstr(err))); 880 881 /* 882 * Probably have a CHECK CONDITION here. Issue a 883 * REQUEST SENSE. 884 */ 885 memset(&sense_cmd, 0, sizeof(sense_cmd)); 886 sense_cmd.opcode = REQUEST_SENSE; 887 sense_cmd.byte2 = sc_link->scsipi_scsi.lun << 888 SCSI_CMD_LUN_SHIFT; 889 sense_cmd.length = sizeof(xs->sense); 890 891 if ((err = umass_bulk_transfer(sc, sc_link->scsipi_scsi.lun, 892 (struct scsipi_generic *)&sense_cmd, sizeof(sense_cmd), 893 &xs->sense, sizeof(xs->sense), DIR_IN, NULL)) != 894 USBD_NORMAL_COMPLETION) { 895 DPRINTF(UDMASS_SCSI, ("%s: REQUEST SENSE failed: %s\n", 896 USBDEVNAME(sc->sc_dev), usbd_errstr(err))); 897 xs->error = XS_DRIVER_STUFFUP; /* XXX */ 898 } else 899 xs->error = XS_SENSE; 900 } 901 xs->resid = residue; 902 903 DPRINTF(UDMASS_SCSI, ("%s: umass_scsi_cmd: error = %d, resid = 0x%x\n", 904 USBDEVNAME(sc->sc_dev), xs->error, xs->resid)); 905 906 xs->xs_status |= XS_STS_DONE; 907 scsipi_done(xs); 908 909 /* We are done with the softc for now. */ 910 if (--sc->sc_refcnt < 0) 911 usb_detach_wakeup(USBDEV(sc->sc_dev)); 912 913 /* 914 * XXXJRT We must return successfully queued if we're an 915 * XXXJRT `asynchronous' command, otherwise `xs' will be 916 * XXXJRT freed twice: once in scsipi_done(), and once in 917 * XXXJRT scsi_scsipi_cmd(). 918 */ 919 if ((xs->xs_control & XS_CTL_POLL) == 0) 920 return (SUCCESSFULLY_QUEUED); 921 922 return (COMPLETE); 923 } 924 925 void 926 umass_scsipi_minphys(bp) 927 struct buf *bp; 928 { 929 930 /* No limit here. */ 931 minphys(bp); 932 } 933
Indexes created Tue Sep 30 20:09:53 GMT 2025