umct.c revision 1.29.4.1
1 /* $NetBSD: umct.c,v 1.29.4.1 2011/03/05 20:54:15 rmind Exp $ */ 2 /* 3 * Copyright (c) 2001 The NetBSD Foundation, Inc. 4 * All rights reserved. 5 * 6 * This code is derived from software contributed to The NetBSD Foundation 7 * by Ichiro FUKUHARA (ichiro (at) ichiro.org). 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 19 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 20 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 21 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 22 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28 * POSSIBILITY OF SUCH DAMAGE. 29 */ 30 31 /* 32 * MCT USB-RS232 Interface Controller 33 * http://www.mct.com.tw/prod/rs232.html 34 * http://www.dlink.com/products/usb/dsbs25 35 */ 36 37 #include <sys/cdefs.h> 38 __KERNEL_RCSID(0, "$NetBSD: umct.c,v 1.29.4.1 2011/03/05 20:54:15 rmind Exp $"); 39 40 #include <sys/param.h> 41 #include <sys/systm.h> 42 #include <sys/kernel.h> 43 #include <sys/malloc.h> 44 #include <sys/ioctl.h> 45 #include <sys/conf.h> 46 #include <sys/tty.h> 47 #include <sys/file.h> 48 #include <sys/select.h> 49 #include <sys/proc.h> 50 #include <sys/vnode.h> 51 #include <sys/device.h> 52 #include <sys/poll.h> 53 54 #include <dev/usb/usb.h> 55 #include <dev/usb/usbcdc.h> 56 57 #include <dev/usb/usbdi.h> 58 #include <dev/usb/usbdi_util.h> 59 #include <dev/usb/usbdevs.h> 60 #include <dev/usb/usb_quirks.h> 61 62 #include <dev/usb/ucomvar.h> 63 #include <dev/usb/umct.h> 64 65 #ifdef UMCT_DEBUG 66 #define DPRINTFN(n, x) if (umctdebug > (n)) printf x 67 int umctdebug = 0; 68 #else 69 #define DPRINTFN(n, x) 70 #endif 71 #define DPRINTF(x) DPRINTFN(0, x) 72 73 #define UMCT_CONFIG_INDEX 0 74 #define UMCT_IFACE_INDEX 0 75 76 struct umct_softc { 77 device_t sc_dev; /* base device */ 78 usbd_device_handle sc_udev; /* USB device */ 79 usbd_interface_handle sc_iface; /* interface */ 80 int sc_iface_number; /* interface number */ 81 u_int16_t sc_product; 82 83 int sc_intr_number; /* interrupt number */ 84 usbd_pipe_handle sc_intr_pipe; /* interrupt pipe */ 85 u_char *sc_intr_buf; /* interrupt buffer */ 86 int sc_isize; 87 88 usb_cdc_line_state_t sc_line_state; /* current line state */ 89 u_char sc_dtr; /* current DTR state */ 90 u_char sc_rts; /* current RTS state */ 91 u_char sc_break; /* set break */ 92 93 u_char sc_status; 94 95 device_t sc_subdev; /* ucom device */ 96 97 u_char sc_dying; /* disconnecting */ 98 99 u_char sc_lsr; /* Local status register */ 100 u_char sc_msr; /* umct status register */ 101 102 u_int last_lcr; /* keep lcr register */ 103 }; 104 105 /* 106 * These are the maximum number of bytes transferred per frame. 107 * The output buffer size cannot be increased due to the size encoding. 108 */ 109 #define UMCTIBUFSIZE 256 110 #define UMCTOBUFSIZE 256 111 112 Static void umct_init(struct umct_softc *); 113 Static void umct_set_baudrate(struct umct_softc *, u_int); 114 Static void umct_set_lcr(struct umct_softc *, u_int); 115 Static void umct_intr(usbd_xfer_handle, usbd_private_handle, usbd_status); 116 117 Static void umct_set(void *, int, int, int); 118 Static void umct_dtr(struct umct_softc *, int); 119 Static void umct_rts(struct umct_softc *, int); 120 Static void umct_break(struct umct_softc *, int); 121 Static void umct_set_line_state(struct umct_softc *); 122 Static void umct_get_status(void *, int portno, u_char *lsr, u_char *msr); 123 Static int umct_param(void *, int, struct termios *); 124 Static int umct_open(void *, int); 125 Static void umct_close(void *, int); 126 127 struct ucom_methods umct_methods = { 128 umct_get_status, 129 umct_set, 130 umct_param, 131 NULL, 132 umct_open, 133 umct_close, 134 NULL, 135 NULL, 136 }; 137 138 static const struct usb_devno umct_devs[] = { 139 /* MCT USB-232 Interface Products */ 140 { USB_VENDOR_MCT, USB_PRODUCT_MCT_USB232 }, 141 /* Sitecom USB-232 Products */ 142 { USB_VENDOR_MCT, USB_PRODUCT_MCT_SITECOM_USB232 }, 143 /* D-Link DU-H3SP USB BAY Hub Products */ 144 { USB_VENDOR_MCT, USB_PRODUCT_MCT_DU_H3SP_USB232 }, 145 /* BELKIN F5U109 */ 146 { USB_VENDOR_BELKIN, USB_PRODUCT_BELKIN_F5U109 }, 147 }; 148 #define umct_lookup(v, p) usb_lookup(umct_devs, v, p) 149 150 int umct_match(device_t, cfdata_t, void *); 151 void umct_attach(device_t, device_t, void *); 152 void umct_childdet(device_t, device_t); 153 int umct_detach(device_t, int); 154 int umct_activate(device_t, enum devact); 155 extern struct cfdriver umct_cd; 156 CFATTACH_DECL2_NEW(umct, sizeof(struct umct_softc), umct_match, 157 umct_attach, umct_detach, umct_activate, NULL, umct_childdet); 158 159 int 160 umct_match(device_t parent, cfdata_t match, void *aux) 161 { 162 struct usb_attach_arg *uaa = aux; 163 164 return (umct_lookup(uaa->vendor, uaa->product) != NULL ? 165 UMATCH_VENDOR_PRODUCT : UMATCH_NONE); 166 } 167 168 void 169 umct_attach(device_t parent, device_t self, void *aux) 170 { 171 struct umct_softc *sc = device_private(self); 172 struct usb_attach_arg *uaa = aux; 173 usbd_device_handle dev = uaa->device; 174 usb_config_descriptor_t *cdesc; 175 usb_interface_descriptor_t *id; 176 usb_endpoint_descriptor_t *ed; 177 178 char *devinfop; 179 usbd_status err; 180 int i; 181 struct ucom_attach_args uca; 182 183 sc->sc_dev = self; 184 185 aprint_naive("\n"); 186 aprint_normal("\n"); 187 188 devinfop = usbd_devinfo_alloc(dev, 0); 189 aprint_normal_dev(self, "%s\n", devinfop); 190 usbd_devinfo_free(devinfop); 191 192 sc->sc_udev = dev; 193 sc->sc_product = uaa->product; 194 195 DPRINTF(("\n\numct attach: sc=%p\n", sc)); 196 197 /* initialize endpoints */ 198 uca.bulkin = uca.bulkout = -1; 199 sc->sc_intr_number = -1; 200 sc->sc_intr_pipe = NULL; 201 202 /* Move the device into the configured state. */ 203 err = usbd_set_config_index(dev, UMCT_CONFIG_INDEX, 1); 204 if (err) { 205 aprint_error_dev(self, "failed to set configuration, err=%s\n", 206 usbd_errstr(err)); 207 sc->sc_dying = 1; 208 return; 209 } 210 211 /* get the config descriptor */ 212 cdesc = usbd_get_config_descriptor(sc->sc_udev); 213 214 if (cdesc == NULL) { 215 aprint_error_dev(self, 216 "failed to get configuration descriptor\n"); 217 sc->sc_dying = 1; 218 return; 219 } 220 221 /* get the interface */ 222 err = usbd_device2interface_handle(dev, UMCT_IFACE_INDEX, 223 &sc->sc_iface); 224 if (err) { 225 aprint_error_dev(self, "failed to get interface, err=%s\n", 226 usbd_errstr(err)); 227 sc->sc_dying = 1; 228 return; 229 } 230 231 /* Find the bulk{in,out} and interrupt endpoints */ 232 233 id = usbd_get_interface_descriptor(sc->sc_iface); 234 sc->sc_iface_number = id->bInterfaceNumber; 235 236 for (i = 0; i < id->bNumEndpoints; i++) { 237 ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i); 238 if (ed == NULL) { 239 aprint_error_dev(self, 240 "no endpoint descriptor for %d\n", i); 241 sc->sc_dying = 1; 242 return; 243 } 244 245 /* 246 * The Bulkin endpoint is marked as an interrupt. Since 247 * we can't rely on the endpoint descriptor order, we'll 248 * check the wMaxPacketSize field to differentiate. 249 */ 250 if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && 251 UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT && 252 UGETW(ed->wMaxPacketSize) != 0x2) { 253 uca.bulkin = ed->bEndpointAddress; 254 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT && 255 UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { 256 uca.bulkout = ed->bEndpointAddress; 257 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && 258 UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) { 259 sc->sc_intr_number = ed->bEndpointAddress; 260 sc->sc_isize = UGETW(ed->wMaxPacketSize); 261 } 262 } 263 264 if (uca.bulkin == -1) { 265 aprint_error_dev(self, "Could not find data bulk in\n"); 266 sc->sc_dying = 1; 267 return; 268 } 269 270 if (uca.bulkout == -1) { 271 aprint_error_dev(self, "Could not find data bulk out\n"); 272 sc->sc_dying = 1; 273 return; 274 } 275 276 if (sc->sc_intr_number== -1) { 277 aprint_error_dev(self, "Could not find interrupt in\n"); 278 sc->sc_dying = 1; 279 return; 280 } 281 282 sc->sc_dtr = sc->sc_rts = 0; 283 uca.portno = UCOM_UNK_PORTNO; 284 /* bulkin, bulkout set above */ 285 uca.ibufsize = UMCTIBUFSIZE; 286 if (sc->sc_product == USB_PRODUCT_MCT_SITECOM_USB232) 287 uca.obufsize = 16; /* device is broken */ 288 else 289 uca.obufsize = UMCTOBUFSIZE; 290 uca.ibufsizepad = UMCTIBUFSIZE; 291 uca.opkthdrlen = 0; 292 uca.device = dev; 293 uca.iface = sc->sc_iface; 294 uca.methods = &umct_methods; 295 uca.arg = sc; 296 uca.info = NULL; 297 298 umct_init(sc); 299 300 usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev, 301 sc->sc_dev); 302 303 DPRINTF(("umct: in=0x%x out=0x%x intr=0x%x\n", 304 uca.bulkin, uca.bulkout, sc->sc_intr_number )); 305 sc->sc_subdev = config_found_sm_loc(self, "ucombus", NULL, &uca, 306 ucomprint, ucomsubmatch); 307 308 return; 309 } 310 311 void 312 umct_childdet(device_t self, device_t child) 313 { 314 struct umct_softc *sc = device_private(self); 315 316 KASSERT(sc->sc_subdev == child); 317 sc->sc_subdev = NULL; 318 } 319 320 int 321 umct_detach(device_t self, int flags) 322 { 323 struct umct_softc *sc = device_private(self); 324 int rv = 0; 325 326 DPRINTF(("umct_detach: sc=%p flags=%d\n", sc, flags)); 327 328 if (sc->sc_intr_pipe != NULL) { 329 usbd_abort_pipe(sc->sc_intr_pipe); 330 usbd_close_pipe(sc->sc_intr_pipe); 331 free(sc->sc_intr_buf, M_USBDEV); 332 sc->sc_intr_pipe = NULL; 333 } 334 335 sc->sc_dying = 1; 336 if (sc->sc_subdev != NULL) 337 rv = config_detach(sc->sc_subdev, flags); 338 339 usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev, 340 sc->sc_dev); 341 342 return (rv); 343 } 344 345 int 346 umct_activate(device_t self, enum devact act) 347 { 348 struct umct_softc *sc = device_private(self); 349 350 switch (act) { 351 case DVACT_DEACTIVATE: 352 sc->sc_dying = 1; 353 return 0; 354 default: 355 return EOPNOTSUPP; 356 } 357 } 358 359 void 360 umct_set_line_state(struct umct_softc *sc) 361 { 362 usb_device_request_t req; 363 uByte ls; 364 365 ls = (sc->sc_dtr ? MCR_DTR : 0) | 366 (sc->sc_rts ? MCR_RTS : 0); 367 368 DPRINTF(("umct_set_line_state: DTR=%d,RTS=%d,ls=%02x\n", 369 sc->sc_dtr, sc->sc_rts, ls)); 370 371 req.bmRequestType = UMCT_SET_REQUEST; 372 req.bRequest = REQ_SET_MCR; 373 USETW(req.wValue, 0); 374 USETW(req.wIndex, sc->sc_iface_number); 375 USETW(req.wLength, LENGTH_SET_MCR); 376 377 (void)usbd_do_request(sc->sc_udev, &req, &ls); 378 } 379 380 void 381 umct_set(void *addr, int portno, int reg, int onoff) 382 { 383 struct umct_softc *sc = addr; 384 385 switch (reg) { 386 case UCOM_SET_DTR: 387 umct_dtr(sc, onoff); 388 break; 389 case UCOM_SET_RTS: 390 umct_rts(sc, onoff); 391 break; 392 case UCOM_SET_BREAK: 393 umct_break(sc, onoff); 394 break; 395 default: 396 break; 397 } 398 } 399 400 void 401 umct_dtr(struct umct_softc *sc, int onoff) 402 { 403 404 DPRINTF(("umct_dtr: onoff=%d\n", onoff)); 405 406 if (sc->sc_dtr == onoff) 407 return; 408 sc->sc_dtr = onoff; 409 410 umct_set_line_state(sc); 411 } 412 413 void 414 umct_rts(struct umct_softc *sc, int onoff) 415 { 416 DPRINTF(("umct_rts: onoff=%d\n", onoff)); 417 418 if (sc->sc_rts == onoff) 419 return; 420 sc->sc_rts = onoff; 421 422 umct_set_line_state(sc); 423 } 424 425 void 426 umct_break(struct umct_softc *sc, int onoff) 427 { 428 DPRINTF(("umct_break: onoff=%d\n", onoff)); 429 430 umct_set_lcr(sc, onoff ? sc->last_lcr | LCR_SET_BREAK : 431 sc->last_lcr); 432 } 433 434 void 435 umct_set_lcr(struct umct_softc *sc, u_int data) 436 { 437 usb_device_request_t req; 438 uByte adata; 439 440 adata = data; 441 req.bmRequestType = UMCT_SET_REQUEST; 442 req.bRequest = REQ_SET_LCR; 443 USETW(req.wValue, 0); 444 USETW(req.wIndex, sc->sc_iface_number); 445 USETW(req.wLength, LENGTH_SET_LCR); 446 447 (void)usbd_do_request(sc->sc_udev, &req, &adata); /* XXX should check */ 448 } 449 450 void 451 umct_set_baudrate(struct umct_softc *sc, u_int rate) 452 { 453 usb_device_request_t req; 454 uDWord arate; 455 u_int val; 456 457 if (sc->sc_product == USB_PRODUCT_MCT_SITECOM_USB232 || 458 sc->sc_product == USB_PRODUCT_BELKIN_F5U109) { 459 switch (rate) { 460 case 300: val = 0x01; break; 461 case 600: val = 0x02; break; 462 case 1200: val = 0x03; break; 463 case 2400: val = 0x04; break; 464 case 4800: val = 0x06; break; 465 case 9600: val = 0x08; break; 466 case 19200: val = 0x09; break; 467 case 38400: val = 0x0a; break; 468 case 57600: val = 0x0b; break; 469 case 115200: val = 0x0c; break; 470 default: val = -1; break; 471 } 472 } else { 473 val = UMCT_BAUD_RATE(rate); 474 } 475 USETDW(arate, val); 476 477 req.bmRequestType = UMCT_SET_REQUEST; 478 req.bRequest = REQ_SET_BAUD_RATE; 479 USETW(req.wValue, 0); 480 USETW(req.wIndex, sc->sc_iface_number); 481 USETW(req.wLength, LENGTH_BAUD_RATE); 482 483 (void)usbd_do_request(sc->sc_udev, &req, arate); /* XXX should check */ 484 } 485 486 void 487 umct_init(struct umct_softc *sc) 488 { 489 umct_set_baudrate(sc, 9600); 490 umct_set_lcr(sc, LCR_DATA_BITS_8 | LCR_PARITY_NONE | LCR_STOP_BITS_1); 491 } 492 493 int 494 umct_param(void *addr, int portno, struct termios *t) 495 { 496 struct umct_softc *sc = addr; 497 u_int data = 0; 498 499 DPRINTF(("umct_param: sc=%p\n", sc)); 500 501 DPRINTF(("umct_param: BAUDRATE=%d\n", t->c_ospeed)); 502 503 if (ISSET(t->c_cflag, CSTOPB)) 504 data |= LCR_STOP_BITS_2; 505 else 506 data |= LCR_STOP_BITS_1; 507 if (ISSET(t->c_cflag, PARENB)) { 508 if (ISSET(t->c_cflag, PARODD)) 509 data |= LCR_PARITY_ODD; 510 else 511 data |= LCR_PARITY_EVEN; 512 } else 513 data |= LCR_PARITY_NONE; 514 switch (ISSET(t->c_cflag, CSIZE)) { 515 case CS5: 516 data |= LCR_DATA_BITS_5; 517 break; 518 case CS6: 519 data |= LCR_DATA_BITS_6; 520 break; 521 case CS7: 522 data |= LCR_DATA_BITS_7; 523 break; 524 case CS8: 525 data |= LCR_DATA_BITS_8; 526 break; 527 } 528 529 umct_set_baudrate(sc, t->c_ospeed); 530 531 sc->last_lcr = data; 532 umct_set_lcr(sc, data); 533 534 return (0); 535 } 536 537 int 538 umct_open(void *addr, int portno) 539 { 540 struct umct_softc *sc = addr; 541 int err, lcr_data; 542 543 if (sc->sc_dying) 544 return (EIO); 545 546 DPRINTF(("umct_open: sc=%p\n", sc)); 547 548 /* initialize LCR */ 549 lcr_data = LCR_DATA_BITS_8 | LCR_PARITY_NONE | 550 LCR_STOP_BITS_1; 551 umct_set_lcr(sc, lcr_data); 552 553 if (sc->sc_intr_number != -1 && sc->sc_intr_pipe == NULL) { 554 sc->sc_status = 0; /* clear status bit */ 555 sc->sc_intr_buf = malloc(sc->sc_isize, M_USBDEV, M_WAITOK); 556 err = usbd_open_pipe_intr(sc->sc_iface, sc->sc_intr_number, 557 USBD_SHORT_XFER_OK, &sc->sc_intr_pipe, sc, 558 sc->sc_intr_buf, sc->sc_isize, 559 umct_intr, USBD_DEFAULT_INTERVAL); 560 if (err) { 561 DPRINTF(("%s: cannot open interrupt pipe (addr %d)\n", 562 device_xname(sc->sc_dev), sc->sc_intr_number)); 563 return (EIO); 564 } 565 } 566 567 return (0); 568 } 569 570 void 571 umct_close(void *addr, int portno) 572 { 573 struct umct_softc *sc = addr; 574 int err; 575 576 if (sc->sc_dying) 577 return; 578 579 DPRINTF(("umct_close: close\n")); 580 581 if (sc->sc_intr_pipe != NULL) { 582 err = usbd_abort_pipe(sc->sc_intr_pipe); 583 if (err) 584 printf("%s: abort interrupt pipe failed: %s\n", 585 device_xname(sc->sc_dev), usbd_errstr(err)); 586 err = usbd_close_pipe(sc->sc_intr_pipe); 587 if (err) 588 printf("%s: close interrupt pipe failed: %s\n", 589 device_xname(sc->sc_dev), usbd_errstr(err)); 590 free(sc->sc_intr_buf, M_USBDEV); 591 sc->sc_intr_pipe = NULL; 592 } 593 } 594 595 void 596 umct_intr(usbd_xfer_handle xfer, usbd_private_handle priv, 597 usbd_status status) 598 { 599 struct umct_softc *sc = priv; 600 u_char *tbuf = sc->sc_intr_buf; 601 u_char mstatus; 602 603 if (sc->sc_dying) 604 return; 605 606 if (status != USBD_NORMAL_COMPLETION) { 607 if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) 608 return; 609 610 DPRINTF(("%s: abnormal status: %s\n", device_xname(sc->sc_dev), 611 usbd_errstr(status))); 612 usbd_clear_endpoint_stall_async(sc->sc_intr_pipe); 613 return; 614 } 615 616 DPRINTF(("%s: umct status = MSR:%02x, LSR:%02x\n", 617 device_xname(sc->sc_dev), tbuf[0],tbuf[1])); 618 619 sc->sc_lsr = sc->sc_msr = 0; 620 mstatus = tbuf[0]; 621 if (ISSET(mstatus, MSR_DSR)) 622 sc->sc_msr |= UMSR_DSR; 623 if (ISSET(mstatus, MSR_DCD)) 624 sc->sc_msr |= UMSR_DCD; 625 ucom_status_change(device_private(sc->sc_subdev)); 626 } 627 628 void 629 umct_get_status(void *addr, int portno, u_char *lsr, u_char *msr) 630 { 631 struct umct_softc *sc = addr; 632 633 DPRINTF(("umct_get_status:\n")); 634 635 if (lsr != NULL) 636 *lsr = sc->sc_lsr; 637 if (msr != NULL) 638 *msr = sc->sc_msr; 639 } 640
Indexes created Thu Oct 02 10:09:58 GMT 2025