umct.c revision 1.37
1 /* $NetBSD: umct.c,v 1.37 2019/05/04 08:04:13 mrg Exp $ */ 2 /* 3 * Copyright (c) 2001 The NetBSD Foundation, Inc. 4 * All rights reserved. 5 * 6 * This code is derived from software contributed to The NetBSD Foundation 7 * by Ichiro FUKUHARA (ichiro (at) ichiro.org). 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 19 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 20 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 21 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 22 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28 * POSSIBILITY OF SUCH DAMAGE. 29 */ 30 31 /* 32 * MCT USB-RS232 Interface Controller 33 * http://www.mct.com.tw/prod/rs232.html 34 * http://www.dlink.com/products/usb/dsbs25 35 */ 36 37 #include <sys/cdefs.h> 38 __KERNEL_RCSID(0, "$NetBSD: umct.c,v 1.37 2019/05/04 08:04:13 mrg Exp $"); 39 40 #ifdef _KERNEL_OPT 41 #include "opt_usb.h" 42 #endif 43 44 #include <sys/param.h> 45 #include <sys/systm.h> 46 #include <sys/kernel.h> 47 #include <sys/ioctl.h> 48 #include <sys/conf.h> 49 #include <sys/tty.h> 50 #include <sys/file.h> 51 #include <sys/select.h> 52 #include <sys/proc.h> 53 #include <sys/vnode.h> 54 #include <sys/device.h> 55 #include <sys/poll.h> 56 57 #include <dev/usb/usb.h> 58 #include <dev/usb/usbcdc.h> 59 60 #include <dev/usb/usbdi.h> 61 #include <dev/usb/usbdi_util.h> 62 #include <dev/usb/usbdevs.h> 63 #include <dev/usb/usb_quirks.h> 64 65 #include <dev/usb/ucomvar.h> 66 #include <dev/usb/umct.h> 67 68 #ifdef UMCT_DEBUG 69 #define DPRINTFN(n, x) if (umctdebug > (n)) printf x 70 int umctdebug = 0; 71 #else 72 #define DPRINTFN(n, x) 73 #endif 74 #define DPRINTF(x) DPRINTFN(0, x) 75 76 #define UMCT_CONFIG_INDEX 0 77 #define UMCT_IFACE_INDEX 0 78 79 struct umct_softc { 80 device_t sc_dev; /* base device */ 81 struct usbd_device * sc_udev; /* USB device */ 82 struct usbd_interface * sc_iface; /* interface */ 83 int sc_iface_number; /* interface number */ 84 uint16_t sc_product; 85 86 int sc_intr_number; /* interrupt number */ 87 struct usbd_pipe * sc_intr_pipe; /* interrupt pipe */ 88 u_char *sc_intr_buf; /* interrupt buffer */ 89 int sc_isize; 90 91 usb_cdc_line_state_t sc_line_state; /* current line state */ 92 u_char sc_dtr; /* current DTR state */ 93 u_char sc_rts; /* current RTS state */ 94 u_char sc_break; /* set break */ 95 96 u_char sc_status; 97 98 device_t sc_subdev; /* ucom device */ 99 100 u_char sc_dying; /* disconnecting */ 101 102 u_char sc_lsr; /* Local status register */ 103 u_char sc_msr; /* umct status register */ 104 105 u_int last_lcr; /* keep lcr register */ 106 }; 107 108 /* 109 * These are the maximum number of bytes transferred per frame. 110 * The output buffer size cannot be increased due to the size encoding. 111 */ 112 #define UMCTIBUFSIZE 256 113 #define UMCTOBUFSIZE 256 114 115 Static void umct_init(struct umct_softc *); 116 Static void umct_set_baudrate(struct umct_softc *, u_int); 117 Static void umct_set_lcr(struct umct_softc *, u_int); 118 Static void umct_intr(struct usbd_xfer *, void *, usbd_status); 119 120 Static void umct_set(void *, int, int, int); 121 Static void umct_dtr(struct umct_softc *, int); 122 Static void umct_rts(struct umct_softc *, int); 123 Static void umct_break(struct umct_softc *, int); 124 Static void umct_set_line_state(struct umct_softc *); 125 Static void umct_get_status(void *, int, u_char *, u_char *); 126 Static int umct_param(void *, int, struct termios *); 127 Static int umct_open(void *, int); 128 Static void umct_close(void *, int); 129 130 struct ucom_methods umct_methods = { 131 .ucom_get_status = umct_get_status, 132 .ucom_set = umct_set, 133 .ucom_param = umct_param, 134 .ucom_open = umct_open, 135 .ucom_close = umct_close, 136 }; 137 138 static const struct usb_devno umct_devs[] = { 139 /* MCT USB-232 Interface Products */ 140 { USB_VENDOR_MCT, USB_PRODUCT_MCT_USB232 }, 141 /* Sitecom USB-232 Products */ 142 { USB_VENDOR_MCT, USB_PRODUCT_MCT_SITECOM_USB232 }, 143 /* D-Link DU-H3SP USB BAY Hub Products */ 144 { USB_VENDOR_MCT, USB_PRODUCT_MCT_DU_H3SP_USB232 }, 145 /* BELKIN F5U109 */ 146 { USB_VENDOR_BELKIN, USB_PRODUCT_BELKIN_F5U109 }, 147 }; 148 #define umct_lookup(v, p) usb_lookup(umct_devs, v, p) 149 150 int umct_match(device_t, cfdata_t, void *); 151 void umct_attach(device_t, device_t, void *); 152 void umct_childdet(device_t, device_t); 153 int umct_detach(device_t, int); 154 int umct_activate(device_t, enum devact); 155 extern struct cfdriver umct_cd; 156 CFATTACH_DECL2_NEW(umct, sizeof(struct umct_softc), umct_match, 157 umct_attach, umct_detach, umct_activate, NULL, umct_childdet); 158 159 int 160 umct_match(device_t parent, cfdata_t match, void *aux) 161 { 162 struct usb_attach_arg *uaa = aux; 163 164 return umct_lookup(uaa->uaa_vendor, uaa->uaa_product) != NULL ? 165 UMATCH_VENDOR_PRODUCT : UMATCH_NONE; 166 } 167 168 void 169 umct_attach(device_t parent, device_t self, void *aux) 170 { 171 struct umct_softc *sc = device_private(self); 172 struct usb_attach_arg *uaa = aux; 173 struct usbd_device *dev = uaa->uaa_device; 174 usb_config_descriptor_t *cdesc; 175 usb_interface_descriptor_t *id; 176 usb_endpoint_descriptor_t *ed; 177 178 char *devinfop; 179 usbd_status err; 180 int i; 181 struct ucom_attach_args ucaa; 182 183 sc->sc_dev = self; 184 185 aprint_naive("\n"); 186 aprint_normal("\n"); 187 188 devinfop = usbd_devinfo_alloc(dev, 0); 189 aprint_normal_dev(self, "%s\n", devinfop); 190 usbd_devinfo_free(devinfop); 191 192 sc->sc_udev = dev; 193 sc->sc_product = uaa->uaa_product; 194 195 DPRINTF(("\n\numct attach: sc=%p\n", sc)); 196 197 /* initialize endpoints */ 198 ucaa.ucaa_bulkin = ucaa.ucaa_bulkout = -1; 199 sc->sc_intr_number = -1; 200 sc->sc_intr_pipe = NULL; 201 202 /* Move the device into the configured state. */ 203 err = usbd_set_config_index(dev, UMCT_CONFIG_INDEX, 1); 204 if (err) { 205 aprint_error_dev(self, "failed to set configuration, err=%s\n", 206 usbd_errstr(err)); 207 sc->sc_dying = 1; 208 return; 209 } 210 211 /* get the config descriptor */ 212 cdesc = usbd_get_config_descriptor(sc->sc_udev); 213 214 if (cdesc == NULL) { 215 aprint_error_dev(self, 216 "failed to get configuration descriptor\n"); 217 sc->sc_dying = 1; 218 return; 219 } 220 221 /* get the interface */ 222 err = usbd_device2interface_handle(dev, UMCT_IFACE_INDEX, 223 &sc->sc_iface); 224 if (err) { 225 aprint_error_dev(self, "failed to get interface, err=%s\n", 226 usbd_errstr(err)); 227 sc->sc_dying = 1; 228 return; 229 } 230 231 /* Find the bulk{in,out} and interrupt endpoints */ 232 233 id = usbd_get_interface_descriptor(sc->sc_iface); 234 sc->sc_iface_number = id->bInterfaceNumber; 235 236 for (i = 0; i < id->bNumEndpoints; i++) { 237 ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i); 238 if (ed == NULL) { 239 aprint_error_dev(self, 240 "no endpoint descriptor for %d\n", i); 241 sc->sc_dying = 1; 242 return; 243 } 244 245 /* 246 * The Bulkin endpoint is marked as an interrupt. Since 247 * we can't rely on the endpoint descriptor order, we'll 248 * check the wMaxPacketSize field to differentiate. 249 */ 250 if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && 251 UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT && 252 UGETW(ed->wMaxPacketSize) != 0x2) { 253 ucaa.ucaa_bulkin = ed->bEndpointAddress; 254 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT && 255 UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { 256 ucaa.ucaa_bulkout = ed->bEndpointAddress; 257 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && 258 UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) { 259 sc->sc_intr_number = ed->bEndpointAddress; 260 sc->sc_isize = UGETW(ed->wMaxPacketSize); 261 } 262 } 263 264 if (ucaa.ucaa_bulkin == -1) { 265 aprint_error_dev(self, "Could not find data bulk in\n"); 266 sc->sc_dying = 1; 267 return; 268 } 269 270 if (ucaa.ucaa_bulkout == -1) { 271 aprint_error_dev(self, "Could not find data bulk out\n"); 272 sc->sc_dying = 1; 273 return; 274 } 275 276 if (sc->sc_intr_number == -1) { 277 aprint_error_dev(self, "Could not find interrupt in\n"); 278 sc->sc_dying = 1; 279 return; 280 } 281 282 sc->sc_dtr = sc->sc_rts = 0; 283 ucaa.ucaa_portno = UCOM_UNK_PORTNO; 284 /* ucaa_bulkin, ucaa_bulkout set above */ 285 ucaa.ucaa_ibufsize = UMCTIBUFSIZE; 286 if (sc->sc_product == USB_PRODUCT_MCT_SITECOM_USB232) 287 ucaa.ucaa_obufsize = 16; /* device is broken */ 288 else 289 ucaa.ucaa_obufsize = UMCTOBUFSIZE; 290 ucaa.ucaa_ibufsizepad = UMCTIBUFSIZE; 291 ucaa.ucaa_opkthdrlen = 0; 292 ucaa.ucaa_device = dev; 293 ucaa.ucaa_iface = sc->sc_iface; 294 ucaa.ucaa_methods = &umct_methods; 295 ucaa.ucaa_arg = sc; 296 ucaa.ucaa_info = NULL; 297 298 umct_init(sc); 299 300 usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev, sc->sc_dev); 301 302 DPRINTF(("umct: in=0x%x out=0x%x intr=0x%x\n", 303 ucaa.ucaa_bulkin, ucaa.ucaa_bulkout, sc->sc_intr_number)); 304 sc->sc_subdev = config_found_sm_loc(self, "ucombus", NULL, &ucaa, 305 ucomprint, ucomsubmatch); 306 307 return; 308 } 309 310 void 311 umct_childdet(device_t self, device_t child) 312 { 313 struct umct_softc *sc = device_private(self); 314 315 KASSERT(sc->sc_subdev == child); 316 sc->sc_subdev = NULL; 317 } 318 319 int 320 umct_detach(device_t self, int flags) 321 { 322 struct umct_softc *sc = device_private(self); 323 int rv = 0; 324 325 DPRINTF(("umct_detach: sc=%p flags=%d\n", sc, flags)); 326 327 if (sc->sc_intr_pipe != NULL) { 328 usbd_abort_pipe(sc->sc_intr_pipe); 329 usbd_close_pipe(sc->sc_intr_pipe); 330 kmem_free(sc->sc_intr_buf, sc->sc_isize); 331 sc->sc_intr_pipe = NULL; 332 } 333 334 sc->sc_dying = 1; 335 if (sc->sc_subdev != NULL) 336 rv = config_detach(sc->sc_subdev, flags); 337 338 usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev, sc->sc_dev); 339 340 return rv; 341 } 342 343 int 344 umct_activate(device_t self, enum devact act) 345 { 346 struct umct_softc *sc = device_private(self); 347 348 switch (act) { 349 case DVACT_DEACTIVATE: 350 sc->sc_dying = 1; 351 return 0; 352 default: 353 return EOPNOTSUPP; 354 } 355 } 356 357 void 358 umct_set_line_state(struct umct_softc *sc) 359 { 360 usb_device_request_t req; 361 uByte ls; 362 363 ls = (sc->sc_dtr ? MCR_DTR : 0) | 364 (sc->sc_rts ? MCR_RTS : 0); 365 366 DPRINTF(("umct_set_line_state: DTR=%d,RTS=%d,ls=%02x\n", 367 sc->sc_dtr, sc->sc_rts, ls)); 368 369 req.bmRequestType = UMCT_SET_REQUEST; 370 req.bRequest = REQ_SET_MCR; 371 USETW(req.wValue, 0); 372 USETW(req.wIndex, sc->sc_iface_number); 373 USETW(req.wLength, LENGTH_SET_MCR); 374 375 (void)usbd_do_request(sc->sc_udev, &req, &ls); 376 } 377 378 void 379 umct_set(void *addr, int portno, int reg, int onoff) 380 { 381 struct umct_softc *sc = addr; 382 383 switch (reg) { 384 case UCOM_SET_DTR: 385 umct_dtr(sc, onoff); 386 break; 387 case UCOM_SET_RTS: 388 umct_rts(sc, onoff); 389 break; 390 case UCOM_SET_BREAK: 391 umct_break(sc, onoff); 392 break; 393 default: 394 break; 395 } 396 } 397 398 void 399 umct_dtr(struct umct_softc *sc, int onoff) 400 { 401 402 DPRINTF(("umct_dtr: onoff=%d\n", onoff)); 403 404 if (sc->sc_dtr == onoff) 405 return; 406 sc->sc_dtr = onoff; 407 408 umct_set_line_state(sc); 409 } 410 411 void 412 umct_rts(struct umct_softc *sc, int onoff) 413 { 414 DPRINTF(("umct_rts: onoff=%d\n", onoff)); 415 416 if (sc->sc_rts == onoff) 417 return; 418 sc->sc_rts = onoff; 419 420 umct_set_line_state(sc); 421 } 422 423 void 424 umct_break(struct umct_softc *sc, int onoff) 425 { 426 DPRINTF(("umct_break: onoff=%d\n", onoff)); 427 428 umct_set_lcr(sc, onoff ? sc->last_lcr | LCR_SET_BREAK : 429 sc->last_lcr); 430 } 431 432 void 433 umct_set_lcr(struct umct_softc *sc, u_int data) 434 { 435 usb_device_request_t req; 436 uByte adata; 437 438 adata = data; 439 req.bmRequestType = UMCT_SET_REQUEST; 440 req.bRequest = REQ_SET_LCR; 441 USETW(req.wValue, 0); 442 USETW(req.wIndex, sc->sc_iface_number); 443 USETW(req.wLength, LENGTH_SET_LCR); 444 445 (void)usbd_do_request(sc->sc_udev, &req, &adata); /* XXX should check */ 446 } 447 448 void 449 umct_set_baudrate(struct umct_softc *sc, u_int rate) 450 { 451 usb_device_request_t req; 452 uDWord arate; 453 u_int val; 454 455 if (sc->sc_product == USB_PRODUCT_MCT_SITECOM_USB232 || 456 sc->sc_product == USB_PRODUCT_BELKIN_F5U109) { 457 switch (rate) { 458 case 300: val = 0x01; break; 459 case 600: val = 0x02; break; 460 case 1200: val = 0x03; break; 461 case 2400: val = 0x04; break; 462 case 4800: val = 0x06; break; 463 case 9600: val = 0x08; break; 464 case 19200: val = 0x09; break; 465 case 38400: val = 0x0a; break; 466 case 57600: val = 0x0b; break; 467 case 115200: val = 0x0c; break; 468 default: val = -1; break; 469 } 470 } else { 471 val = UMCT_BAUD_RATE(rate); 472 } 473 USETDW(arate, val); 474 475 req.bmRequestType = UMCT_SET_REQUEST; 476 req.bRequest = REQ_SET_BAUD_RATE; 477 USETW(req.wValue, 0); 478 USETW(req.wIndex, sc->sc_iface_number); 479 USETW(req.wLength, LENGTH_BAUD_RATE); 480 481 (void)usbd_do_request(sc->sc_udev, &req, arate); /* XXX should check */ 482 } 483 484 void 485 umct_init(struct umct_softc *sc) 486 { 487 umct_set_baudrate(sc, 9600); 488 umct_set_lcr(sc, LCR_DATA_BITS_8 | LCR_PARITY_NONE | LCR_STOP_BITS_1); 489 } 490 491 int 492 umct_param(void *addr, int portno, struct termios *t) 493 { 494 struct umct_softc *sc = addr; 495 u_int data = 0; 496 497 DPRINTF(("umct_param: sc=%p\n", sc)); 498 499 DPRINTF(("umct_param: BAUDRATE=%d\n", t->c_ospeed)); 500 501 if (ISSET(t->c_cflag, CSTOPB)) 502 data |= LCR_STOP_BITS_2; 503 else 504 data |= LCR_STOP_BITS_1; 505 if (ISSET(t->c_cflag, PARENB)) { 506 if (ISSET(t->c_cflag, PARODD)) 507 data |= LCR_PARITY_ODD; 508 else 509 data |= LCR_PARITY_EVEN; 510 } else 511 data |= LCR_PARITY_NONE; 512 switch (ISSET(t->c_cflag, CSIZE)) { 513 case CS5: 514 data |= LCR_DATA_BITS_5; 515 break; 516 case CS6: 517 data |= LCR_DATA_BITS_6; 518 break; 519 case CS7: 520 data |= LCR_DATA_BITS_7; 521 break; 522 case CS8: 523 data |= LCR_DATA_BITS_8; 524 break; 525 } 526 527 umct_set_baudrate(sc, t->c_ospeed); 528 529 sc->last_lcr = data; 530 umct_set_lcr(sc, data); 531 532 return 0; 533 } 534 535 int 536 umct_open(void *addr, int portno) 537 { 538 struct umct_softc *sc = addr; 539 int err, lcr_data; 540 541 if (sc->sc_dying) 542 return EIO; 543 544 DPRINTF(("umct_open: sc=%p\n", sc)); 545 546 /* initialize LCR */ 547 lcr_data = LCR_DATA_BITS_8 | LCR_PARITY_NONE | 548 LCR_STOP_BITS_1; 549 umct_set_lcr(sc, lcr_data); 550 551 if (sc->sc_intr_number != -1 && sc->sc_intr_pipe == NULL) { 552 sc->sc_status = 0; /* clear status bit */ 553 sc->sc_intr_buf = kmem_alloc(sc->sc_isize, KM_SLEEP); 554 err = usbd_open_pipe_intr(sc->sc_iface, sc->sc_intr_number, 555 USBD_SHORT_XFER_OK, &sc->sc_intr_pipe, sc, 556 sc->sc_intr_buf, sc->sc_isize, 557 umct_intr, USBD_DEFAULT_INTERVAL); 558 if (err) { 559 DPRINTF(("%s: cannot open interrupt pipe (addr %d)\n", 560 device_xname(sc->sc_dev), sc->sc_intr_number)); 561 return EIO; 562 } 563 } 564 565 return 0; 566 } 567 568 void 569 umct_close(void *addr, int portno) 570 { 571 struct umct_softc *sc = addr; 572 int err; 573 574 if (sc->sc_dying) 575 return; 576 577 DPRINTF(("umct_close: close\n")); 578 579 if (sc->sc_intr_pipe != NULL) { 580 err = usbd_abort_pipe(sc->sc_intr_pipe); 581 if (err) 582 printf("%s: abort interrupt pipe failed: %s\n", 583 device_xname(sc->sc_dev), usbd_errstr(err)); 584 err = usbd_close_pipe(sc->sc_intr_pipe); 585 if (err) 586 printf("%s: close interrupt pipe failed: %s\n", 587 device_xname(sc->sc_dev), usbd_errstr(err)); 588 kmem_free(sc->sc_intr_buf, sc->sc_isize); 589 sc->sc_intr_pipe = NULL; 590 } 591 } 592 593 void 594 umct_intr(struct usbd_xfer *xfer, void *priv, 595 usbd_status status) 596 { 597 struct umct_softc *sc = priv; 598 u_char *tbuf = sc->sc_intr_buf; 599 u_char mstatus; 600 601 if (sc->sc_dying) 602 return; 603 604 if (status != USBD_NORMAL_COMPLETION) { 605 if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) 606 return; 607 608 DPRINTF(("%s: abnormal status: %s\n", device_xname(sc->sc_dev), 609 usbd_errstr(status))); 610 usbd_clear_endpoint_stall_async(sc->sc_intr_pipe); 611 return; 612 } 613 614 DPRINTF(("%s: umct status = MSR:%02x, LSR:%02x\n", 615 device_xname(sc->sc_dev), tbuf[0],tbuf[1])); 616 617 sc->sc_lsr = sc->sc_msr = 0; 618 mstatus = tbuf[0]; 619 if (ISSET(mstatus, MSR_DSR)) 620 sc->sc_msr |= UMSR_DSR; 621 if (ISSET(mstatus, MSR_DCD)) 622 sc->sc_msr |= UMSR_DCD; 623 ucom_status_change(device_private(sc->sc_subdev)); 624 } 625 626 void 627 umct_get_status(void *addr, int portno, u_char *lsr, u_char *msr) 628 { 629 struct umct_softc *sc = addr; 630 631 DPRINTF(("umct_get_status:\n")); 632 633 *lsr = sc->sc_lsr; 634 *msr = sc->sc_msr; 635 } 636
Indexes created Fri Sep 26 08:10:20 GMT 2025