xref: /src/sys/dev/usb/ums.c

/*	$NetBSD: ums.c,v 1.81 2010/11/03 22:34:24 dyoung Exp $	*/

/*
 * Copyright (c) 1998 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Lennart Augustsson (lennart (at) augustsson.net) at
 * Carlstedt Research & Technology.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/*
 * HID spec: http://www.usb.org/developers/devclass_docs/HID1_11.pdf
 */

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: ums.c,v 1.81 2010/11/03 22:34:24 dyoung Exp $");

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/device.h>
#include <sys/ioctl.h>
#include <sys/file.h>
#include <sys/select.h>
#include <sys/proc.h>
#include <sys/vnode.h>
#include <sys/poll.h>

#include <dev/usb/usb.h>
#include <dev/usb/usbhid.h>

#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
#include <dev/usb/usbdevs.h>
#include <dev/usb/usb_quirks.h>
#include <dev/usb/uhidev.h>
#include <dev/usb/hid.h>

#include <dev/wscons/wsconsio.h>
#include <dev/wscons/wsmousevar.h>

#ifdef USB_DEBUG
#define DPRINTF(x)	if (umsdebug) printf x
#define DPRINTFN(n,x)	if (umsdebug>(n)) printf x
int	umsdebug = 0;
#else
#define DPRINTF(x)
#define DPRINTFN(n,x)
#endif

#define UMS_BUT(i) ((i) == 1 || (i) == 2 ? 3 - (i) : i)

#define UMSUNIT(s)	(minor(s))

#define PS2LBUTMASK	x01
#define PS2RBUTMASK	x02
#define PS2MBUTMASK	x04
#define PS2BUTMASK 0x0f

#define MAX_BUTTONS	31	/* must not exceed size of sc_buttons */

struct ums_softc {
	struct uhidev sc_hdev;

	struct hid_location sc_loc_x, sc_loc_y, sc_loc_z, sc_loc_w;
	struct hid_location sc_loc_btn[MAX_BUTTONS];

	int sc_enabled;

	int flags;		/* device configuration */
#define UMS_Z		0x01	/* z direction available */
#define UMS_SPUR_BUT_UP	0x02	/* spurious button up events */
#define UMS_REVZ	0x04	/* Z-axis is reversed */
#define UMS_W		0x08	/* w direction/tilt available */
#define UMS_ABS		0x10	/* absolute position, touchpanel */

	int nbuttons;

	u_int32_t sc_buttons;	/* mouse button status */
	device_t sc_wsmousedev;

	char			sc_dying;
};

#define MOUSE_FLAGS_MASK (HIO_CONST|HIO_RELATIVE)

Static void ums_intr(struct uhidev *addr, void *ibuf, u_int len);

Static int	ums_enable(void *);
Static void	ums_disable(void *);
Static int	ums_ioctl(void *, u_long, void *, int, struct lwp * );

const struct wsmouse_accessops ums_accessops = {
	ums_enable,
	ums_ioctl,
	ums_disable,
};

int ums_match(device_t, cfdata_t, void *);
void ums_attach(device_t, device_t, void *);
void ums_childdet(device_t, device_t);
int ums_detach(device_t, int);
int ums_activate(device_t, enum devact);
extern struct cfdriver ums_cd;
CFATTACH_DECL2_NEW(ums, sizeof(struct ums_softc), ums_match, ums_attach,
    ums_detach, ums_activate, NULL, ums_childdet);

int
ums_match(device_t parent, cfdata_t match, void *aux)
{
	struct uhidev_attach_arg *uha = aux;
	int size;
	void *desc;

	/*
	 * Some (older) Griffin PowerMate knobs may masquerade as a
	 * mouse, avoid treating them as such, they have only one axis.
	 */
	if (uha->uaa->vendor == USB_VENDOR_GRIFFIN &&
	    uha->uaa->product == USB_PRODUCT_GRIFFIN_POWERMATE)
		return (UMATCH_NONE);

	uhidev_get_report_desc(uha->parent, &desc, &size);
	if (!hid_is_collection(desc, size, uha->reportid,
			       HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_MOUSE)) &&
	    !hid_is_collection(desc, size, uha->reportid,
			       HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_POINTER)))
		return (UMATCH_NONE);

	return (UMATCH_IFACECLASS);
}

void
ums_attach(device_t parent, device_t self, void *aux)
{
	struct ums_softc *sc = device_private(self);
	struct uhidev_attach_arg *uha = aux;
	struct wsmousedev_attach_args a;
	int size;
	void *desc;
	u_int32_t flags, quirks;
	int i, hl;
	struct hid_location *zloc;
	struct hid_location loc_btn;

	aprint_naive("\n");

	sc->sc_hdev.sc_dev = self;
	sc->sc_hdev.sc_intr = ums_intr;
	sc->sc_hdev.sc_parent = uha->parent;
	sc->sc_hdev.sc_report_id = uha->reportid;

	quirks = usbd_get_quirks(uha->parent->sc_udev)->uq_flags;
	if (quirks & UQ_MS_REVZ)
		sc->flags |= UMS_REVZ;
	if (quirks & UQ_SPUR_BUT_UP)
		sc->flags |= UMS_SPUR_BUT_UP;

	uhidev_get_report_desc(uha->parent, &desc, &size);

	if (!pmf_device_register(self, NULL, NULL))
		aprint_error_dev(self, "couldn't establish power handler\n");

	if (!hid_locate(desc, size, HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_X),
	       uha->reportid, hid_input, &sc->sc_loc_x, &flags)) {
		aprint_error("\n%s: mouse has no X report\n",
		       device_xname(sc->sc_hdev.sc_dev));
		return;
	}
	switch (flags & MOUSE_FLAGS_MASK) {
	case 0:
		sc->flags |= UMS_ABS;
		break;
	case HIO_RELATIVE:
		break;
	default:
		aprint_error("\n%s: X report 0x%04x not supported\n",
		       device_xname(sc->sc_hdev.sc_dev), flags);
		return;
	}

	if (!hid_locate(desc, size, HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_Y),
	       uha->reportid, hid_input, &sc->sc_loc_y, &flags)) {
		aprint_error("\n%s: mouse has no Y report\n",
		       device_xname(sc->sc_hdev.sc_dev));
		return;
	}
	switch (flags & MOUSE_FLAGS_MASK) {
	case 0:
		sc->flags |= UMS_ABS;
		break;
	case HIO_RELATIVE:
		break;
	default:
		aprint_error("\n%s: Y report 0x%04x not supported\n",
		       device_xname(sc->sc_hdev.sc_dev), flags);
		return;
	}

	/* Try the wheel first as the Z activator since it's tradition. */
	hl = hid_locate(desc,
			size,
			HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_WHEEL),
			uha->reportid,
			hid_input,
			&sc->sc_loc_z,
			&flags);

	zloc = &sc->sc_loc_z;
	if (hl) {
		if ((flags & MOUSE_FLAGS_MASK) != HIO_RELATIVE) {
			aprint_verbose("\n%s: Wheel report 0x%04x not "
			    "supported\n", device_xname(sc->sc_hdev.sc_dev),
			    flags);
			sc->sc_loc_z.size = 0;	/* Bad Z coord, ignore it */
		} else {
			sc->flags |= UMS_Z;
			/* Wheels need the Z axis reversed. */
			sc->flags ^= UMS_REVZ;
			/* Put Z on the W coordinate */
			zloc = &sc->sc_loc_w;
		}
	}

	hl = hid_locate(desc,
			size,
			HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_Z),
			uha->reportid,
			hid_input,
			zloc,
			&flags);

	/*
	 * The horizontal component of the scrollball can also be given by
	 * Application Control Pan in the Consumer page, so if we didnt see
	 * any Z then check that.
	 */
	if (!hl) {
		hl = hid_locate(desc,
				size,
				HID_USAGE2(HUP_CONSUMER, HUC_AC_PAN),
				uha->reportid,
				hid_input,
				zloc,
				&flags);
	}

	if (hl) {
		if ((flags & MOUSE_FLAGS_MASK) != HIO_RELATIVE) {
			aprint_verbose("\n%s: Z report 0x%04x not supported\n",
			       device_xname(sc->sc_hdev.sc_dev), flags);
			zloc->size = 0;	/* Bad Z coord, ignore it */
		} else {
			if (sc->flags & UMS_Z)
				sc->flags |= UMS_W;
			else
				sc->flags |= UMS_Z;
		}
	}

	/*
	 * The Microsoft Wireless Laser Mouse 6000 v2.0 reports a bad
	 * position for the wheel and wheel tilt controls -- should be
	 * in bytes 3 & 4 of the report.  Fix this if necessary.
	 */
	if (uha->uaa->vendor == USB_VENDOR_MICROSOFT &&
	    (uha->uaa->product == USB_PRODUCT_MICROSOFT_24GHZ_XCVR10 ||
	     uha->uaa->product == USB_PRODUCT_MICROSOFT_24GHZ_XCVR20)) {
		if ((sc->flags & UMS_Z) && sc->sc_loc_z.pos == 0)
			sc->sc_loc_z.pos = 24;
		if ((sc->flags & UMS_W) && sc->sc_loc_w.pos == 0)
			sc->sc_loc_w.pos = sc->sc_loc_z.pos + 8;
	}

	/* figure out the number of buttons */
	for (i = 1; i <= MAX_BUTTONS; i++)
		if (!hid_locate(desc, size, HID_USAGE2(HUP_BUTTON, i),
			uha->reportid, hid_input, &loc_btn, 0))
			break;
	sc->nbuttons = i - 1;

	aprint_normal(": %d button%s%s%s%s\n",
	    sc->nbuttons, sc->nbuttons == 1 ? "" : "s",
	    sc->flags & UMS_W ? ", W" : "",
	    sc->flags & UMS_Z ? " and Z dir" : "",
	    sc->flags & UMS_W ? "s" : "");

	for (i = 1; i <= sc->nbuttons; i++)
		hid_locate(desc, size, HID_USAGE2(HUP_BUTTON, i),
			   uha->reportid, hid_input,
			   &sc->sc_loc_btn[i-1], 0);

#ifdef USB_DEBUG
	DPRINTF(("ums_attach: sc=%p\n", sc));
	DPRINTF(("ums_attach: X\t%d/%d\n",
		 sc->sc_loc_x.pos, sc->sc_loc_x.size));
	DPRINTF(("ums_attach: Y\t%d/%d\n",
		 sc->sc_loc_y.pos, sc->sc_loc_y.size));
	if (sc->flags & UMS_Z)
		DPRINTF(("ums_attach: Z\t%d/%d\n",
			 sc->sc_loc_z.pos, sc->sc_loc_z.size));
	if (sc->flags & UMS_W)
		DPRINTF(("ums_attach: W\t%d/%d\n",
			 sc->sc_loc_w.pos, sc->sc_loc_w.size));
	for (i = 1; i <= sc->nbuttons; i++) {
		DPRINTF(("ums_attach: B%d\t%d/%d\n",
			 i, sc->sc_loc_btn[i-1].pos,sc->sc_loc_btn[i-1].size));
	}
#endif

	a.accessops = &ums_accessops;
	a.accesscookie = sc;

	sc->sc_wsmousedev = config_found(self, &a, wsmousedevprint);

	return;
}

int
ums_activate(device_t self, enum devact act)
{
	struct ums_softc *sc = device_private(self);

	switch (act) {
	case DVACT_DEACTIVATE:
		sc->sc_dying = 1;
		return 0;
	default:
		return EOPNOTSUPP;
	}
}

void
ums_childdet(device_t self, device_t child)
{
	struct ums_softc *sc = device_private(self);

	KASSERT(sc->sc_wsmousedev == child);
	sc->sc_wsmousedev = NULL;
}

int
ums_detach(device_t self, int flags)
{
	struct ums_softc *sc = device_private(self);
	int rv = 0;

	DPRINTF(("ums_detach: sc=%p flags=%d\n", sc, flags));

	/* No need to do reference counting of ums, wsmouse has all the goo. */
	if (sc->sc_wsmousedev != NULL)
		rv = config_detach(sc->sc_wsmousedev, flags);

	pmf_device_deregister(self);

	return (rv);
}

void
ums_intr(struct uhidev *addr, void *ibuf, u_int len)
{
	struct ums_softc *sc = (struct ums_softc *)addr;
	int dx, dy, dz, dw;
	u_int32_t buttons = 0;
	int i, flags, s;

	DPRINTFN(5,("ums_intr: len=%d\n", len));

	flags = WSMOUSE_INPUT_DELTA;	/* equals 0 */

	dx =  hid_get_data(ibuf, &sc->sc_loc_x);
	if (sc->flags & UMS_ABS) {
		flags |= (WSMOUSE_INPUT_ABSOLUTE_X | WSMOUSE_INPUT_ABSOLUTE_Y);
		dy = hid_get_data(ibuf, &sc->sc_loc_y);
	} else
		dy = -hid_get_data(ibuf, &sc->sc_loc_y);
	dz =  hid_get_data(ibuf, &sc->sc_loc_z);
	dw =  hid_get_data(ibuf, &sc->sc_loc_w);

	if (sc->flags & UMS_REVZ)
		dz = -dz;
	for (i = 0; i < sc->nbuttons; i++)
		if (hid_get_data(ibuf, &sc->sc_loc_btn[i]))
			buttons |= (1 << UMS_BUT(i));

	if (dx != 0 || dy != 0 || dz != 0 || dw != 0 ||
	    buttons != sc->sc_buttons) {
		DPRINTFN(10, ("ums_intr: x:%d y:%d z:%d w:%d buttons:0x%x\n",
			dx, dy, dz, dw, buttons));
		sc->sc_buttons = buttons;
		if (sc->sc_wsmousedev != NULL) {
			s = spltty();
			wsmouse_input(sc->sc_wsmousedev, buttons, dx, dy, dz,
			    dw, flags);
			splx(s);
		}
	}
}

Static int
ums_enable(void *v)
{
	struct ums_softc *sc = v;

	DPRINTFN(1,("ums_enable: sc=%p\n", sc));

	if (sc->sc_dying)
		return (EIO);

	if (sc->sc_enabled)
		return (EBUSY);

	sc->sc_enabled = 1;
	sc->sc_buttons = 0;

	return (uhidev_open(&sc->sc_hdev));
}

Static void
ums_disable(void *v)
{
	struct ums_softc *sc = v;

	DPRINTFN(1,("ums_disable: sc=%p\n", sc));
#ifdef DIAGNOSTIC
	if (!sc->sc_enabled) {
		printf("ums_disable: not enabled\n");
		return;
	}
#endif

	sc->sc_enabled = 0;
	uhidev_close(&sc->sc_hdev);
}

Static int
ums_ioctl(void *v, u_long cmd, void *data, int flag,
    struct lwp * p)

{
	struct ums_softc *sc = v;

	switch (cmd) {
	case WSMOUSEIO_GTYPE:
		if (sc->flags & UMS_ABS)
			*(u_int *)data = WSMOUSE_TYPE_TPANEL;
		else
			*(u_int *)data = WSMOUSE_TYPE_USB;
		return (0);
	}

	return (EPASSTHROUGH);
}