xref: /src/sys/dev/usb/uplcom.c

/*	$NetBSD: uplcom.c,v 1.16 2001/04/02 13:38:14 ichiro Exp $	*/
/*
 * Copyright (c) 2001 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Ichiro FUKUHARA (ichiro (at) ichiro.org).
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *        This product includes software developed by the NetBSD
 *        Foundation, Inc. and its contributors.
 * 4. Neither the name of The NetBSD Foundation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/*
 * Simple datasheet
 * http://www.prolific.com.tw/download/DataSheet/pl2303_ds11.PDF
 * http://www.nisseisg.co.jp/jyouhou/_cp/@gif/2303.pdf
 * 	(english)
 *
 */

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/ioctl.h>
#include <sys/conf.h>
#include <sys/tty.h>
#include <sys/file.h>
#include <sys/select.h>
#include <sys/proc.h>
#include <sys/vnode.h>
#include <sys/device.h>
#include <sys/poll.h>

#include <dev/usb/usb.h>
#include <dev/usb/usbcdc.h>

#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
#include <dev/usb/usbdevs.h>
#include <dev/usb/usb_quirks.h>

#include <dev/usb/usbdevs.h>
#include <dev/usb/ucomvar.h>

#ifdef UPLCOM_DEBUG
#define DPRINTFN(n, x)  if (uplcomdebug > (n)) logprintf x
int	uplcomdebug = 0;
#else
#define DPRINTFN(n, x)
#endif
#define DPRINTF(x) DPRINTFN(0, x)

#define	UPLCOM_CONFIG_INDEX	0
#define	UPLCOM_IFACE_INDEX	0
#define	UPLCOM_SECOND_IFACE_INDEX	1
#define	UPLCOM_RESET		0

#define RSAQ_STATUS_DSR		0x02
#define RSAQ_STATUS_DCD		0x01

struct	uplcom_softc {
	USBBASEDEVICE		sc_dev;		/* base device */
	usbd_device_handle	sc_udev;	/* USB device */
	usbd_interface_handle	sc_iface;	/* interface */
	int			sc_iface_number;	/* interface number */

	int			sc_intr_number;	/* interrupt number */
	usbd_pipe_handle	sc_intr_pipe;	/* interrupt pipe */
	u_char			*sc_intr_buf;	/* interrupt buffer */
	int			sc_isize;

	usb_cdc_line_state_t	sc_line_state;	/* current line state */
	u_char			sc_dtr;		/* current DTR state */
	u_char			sc_rts;		/* current RTS state */
	u_char			sc_status;

	device_ptr_t		sc_subdev;	/* ucom device */

	u_char			sc_dying;	/* disconnecting */

	u_char			sc_lsr;		/* Local status register */
	u_char			sc_msr;		/* uplcom status register */
};

/*
 * These are the maximum number of bytes transferred per frame.
 * The output buffer size cannot be increased due to the size encoding.
 */
#define UPLCOMIBUFSIZE 256
#define UPLCOMOBUFSIZE 256

Static	usbd_status uplcom_reset(struct uplcom_softc *);
Static	usbd_status uplcom_set_line_coding(struct uplcom_softc *sc,
					   usb_cdc_line_state_t *state);
Static	void uplcom_intr(usbd_xfer_handle, usbd_private_handle, usbd_status);

Static	void uplcom_set(void *, int, int, int);
Static	void uplcom_dtr(struct uplcom_softc *, int);
Static	void uplcom_rts(struct uplcom_softc *, int);
Static	void uplcom_break(struct uplcom_softc *, int);
Static	void uplcom_set_line_state(struct uplcom_softc *);
Static	void uplcom_get_status(void *, int portno, u_char *lsr, u_char *msr);
#if TODO
Static	int  uplcom_ioctl(void *, int, u_long, caddr_t, int, struct proc *);
#endif
Static	int  uplcom_param(void *, int, struct termios *);
Static	int  uplcom_open(void *, int);
Static	void uplcom_close(void *, int);

struct	ucom_methods uplcom_methods = {
	uplcom_get_status,
	uplcom_set,
	uplcom_param,
	NULL, /* uplcom_ioctl, TODO */
	uplcom_open,
	uplcom_close,
	NULL,
	NULL,
};

static const struct uplcom_product {
	uint16_t	vendor;
	uint16_t	product;
} uplcom_products [] = {
	/* I/O DATA USB-RSAQ2 */
	{ USB_VENDOR_PROLIFIC, USB_PRODUCT_PROLIFIC_PL2303 },
	/* I/O DATA USB-RSAQ */
	{ USB_VENDOR_IODATA, USB_PRODUCT_IODATA_USBRSAQ },
	/* PLANEX USB-RS232 URS-03 */
	{ USB_VENDOR_ATEN, USB_PRODUCT_ATEN_UC232A },

	{ 0, 0 }
};

USB_DECLARE_DRIVER(uplcom);

USB_MATCH(uplcom)
{
	USB_MATCH_START(uplcom, uaa);
	int i;

	if (uaa->iface != NULL)
		return (UMATCH_NONE);

	for (i = 0; uplcom_products[i].vendor != 0; i++) {
		if (uplcom_products[i].vendor == uaa->vendor &&
 		    uplcom_products[i].product == uaa->product) {
			return (UMATCH_VENDOR_PRODUCT);
		}
	}
	return (UMATCH_NONE);
}

USB_ATTACH(uplcom)
{
	USB_ATTACH_START(uplcom, sc, uaa);
	usbd_device_handle dev = uaa->device;
	usb_config_descriptor_t *cdesc;
	usb_interface_descriptor_t *id;
	usb_endpoint_descriptor_t *ed;

	char devinfo[1024];
	char *devname = USBDEVNAME(sc->sc_dev);
	usbd_status err;
	int i;
	struct ucom_attach_args uca;

        usbd_devinfo(dev, 0, devinfo);
        USB_ATTACH_SETUP;
        printf("%s: %s\n", devname, devinfo);

        sc->sc_udev = dev;

	DPRINTF(("\n\nuplcom attach: sc=%p\n", sc));

	/* initialize endpoints */
	uca.bulkin = uca.bulkout = -1;
	sc->sc_intr_number = -1;
	sc->sc_intr_pipe = NULL;

	/* Move the device into the configured state. */
	err = usbd_set_config_index(dev, UPLCOM_CONFIG_INDEX, 1);
	if (err) {
		printf("\n%s: failed to set configuration, err=%s\n",
			devname, usbd_errstr(err));
		sc->sc_dying = 1;
		USB_ATTACH_ERROR_RETURN;
	}

	/* get the config descriptor */
	cdesc = usbd_get_config_descriptor(sc->sc_udev);

	if (cdesc == NULL) {
		printf("%s: failed to get configuration descriptor\n",
			USBDEVNAME(sc->sc_dev));
		sc->sc_dying = 1;
		USB_ATTACH_ERROR_RETURN;
	}

	/* get the (first/common) interface */
	err = usbd_device2interface_handle(dev, UPLCOM_IFACE_INDEX,
							&sc->sc_iface);
	if (err) {
		printf("\n%s: failed to get interface, err=%s\n",
			devname, usbd_errstr(err));
		sc->sc_dying = 1;
		USB_ATTACH_ERROR_RETURN;
	}

	/* Find the interrupt endpoints */

	id = usbd_get_interface_descriptor(sc->sc_iface);
	sc->sc_iface_number = id->bInterfaceNumber;

	for (i = 0; i < id->bNumEndpoints; i++) {
		ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i);
		if (ed == NULL) {
			printf("%s: no endpoint descriptor for %d\n",
				USBDEVNAME(sc->sc_dev), i);
			sc->sc_dying = 1;
			USB_ATTACH_ERROR_RETURN;
		}

		if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
		    UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
			sc->sc_intr_number = ed->bEndpointAddress;
			sc->sc_isize = UGETW(ed->wMaxPacketSize);
		}
	}

	if (sc->sc_intr_number== -1) {
		printf("%s: Could not find interrupt in\n",
			USBDEVNAME(sc->sc_dev));
		sc->sc_dying = 1;
		USB_ATTACH_ERROR_RETURN;
	}

	/*
	 * USB-RSAQ1 has two interface
	 *
	 *  USB-RSAQ1       | USB-RSAQ2
 	 * -----------------+-----------------
	 * Interface 0      |Interface 0
	 *  Interrupt(0x81) | Interrupt(0x81)
	 * -----------------+ BulkIN(0x02)
	 * Interface 1	    | BulkOUT(0x83)
	 *   BulkIN(0x02)   |
	 *   BulkOUT(0x83)  |
	 */
	if (cdesc->bNumInterface == 2) {
		err = usbd_device2interface_handle(dev,
				UPLCOM_SECOND_IFACE_INDEX, &sc->sc_iface);
		if (err) {
			printf("\n%s: failed to get second interface, err=%s\n",
							devname, usbd_errstr(err));
			sc->sc_dying = 1;
			USB_ATTACH_ERROR_RETURN;
		}
	}

	/* Find the bulk{in,out} endpoints */

	id = usbd_get_interface_descriptor(sc->sc_iface);
	sc->sc_iface_number = id->bInterfaceNumber;

	for (i = 0; i < id->bNumEndpoints; i++) {
		ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i);
		if (ed == NULL) {
			printf("%s: no endpoint descriptor for %d\n",
				USBDEVNAME(sc->sc_dev), i);
			sc->sc_dying = 1;
			USB_ATTACH_ERROR_RETURN;
		}

		if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
		    UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
			uca.bulkin = ed->bEndpointAddress;
		} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
		    UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
			uca.bulkout = ed->bEndpointAddress;
		}
	}

	if (uca.bulkin == -1) {
		printf("%s: Could not find data bulk in\n",
			USBDEVNAME(sc->sc_dev));
		sc->sc_dying = 1;
		USB_ATTACH_ERROR_RETURN;
	}

	if (uca.bulkout == -1) {
		printf("%s: Could not find data bulk out\n",
			USBDEVNAME(sc->sc_dev));
		sc->sc_dying = 1;
		USB_ATTACH_ERROR_RETURN;
	}

	sc->sc_dtr = sc->sc_rts = -1;
	uca.portno = UCOM_UNK_PORTNO;
	/* bulkin, bulkout set above */
	uca.ibufsize = UPLCOMIBUFSIZE;
	uca.obufsize = UPLCOMOBUFSIZE;
	uca.ibufsizepad = UPLCOMIBUFSIZE;
	uca.opkthdrlen = 0;
	uca.device = dev;
	uca.iface = sc->sc_iface;
	uca.methods = &uplcom_methods;
	uca.arg = sc;
	uca.info = NULL;

	err = uplcom_reset(sc);

	if (err) {
		printf("%s: reset failed, %s\n", USBDEVNAME(sc->sc_dev),
			usbd_errstr(err));
		sc->sc_dying = 1;
		USB_ATTACH_ERROR_RETURN;
	}

	usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev,
			   USBDEV(sc->sc_dev));

	DPRINTF(("uplcom: in=0x%x out=0x%x intr=0x%x\n",
			uca.bulkin, uca.bulkout, sc->sc_intr_number ));
	sc->sc_subdev = config_found_sm(self, &uca, ucomprint, ucomsubmatch);

	USB_ATTACH_SUCCESS_RETURN;
}

USB_DETACH(uplcom)
{
	USB_DETACH_START(uplcom, sc);
	int rv = 0;

	DPRINTF(("uplcom_detach: sc=%p flags=%d\n", sc, flags));

        if (sc->sc_intr_pipe != NULL) {
                usbd_abort_pipe(sc->sc_intr_pipe);
                usbd_close_pipe(sc->sc_intr_pipe);
		free(sc->sc_intr_buf, M_USBDEV);
                sc->sc_intr_pipe = NULL;
        }

	sc->sc_dying = 1;
	if (sc->sc_subdev != NULL) {
		rv = config_detach(sc->sc_subdev, flags);
		sc->sc_subdev = NULL;
	}

	usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev,
			   USBDEV(sc->sc_dev));

	return (rv);
}

int
uplcom_activate(device_ptr_t self, enum devact act)
{
	struct uplcom_softc *sc = (struct uplcom_softc *)self;
	int rv = 0;

	switch (act) {
	case DVACT_ACTIVATE:
		return (EOPNOTSUPP);
		break;

	case DVACT_DEACTIVATE:
		if (sc->sc_subdev != NULL)
			rv = config_deactivate(sc->sc_subdev);
		sc->sc_dying = 1;
		break;
	}
	return (rv);
}


usbd_status
uplcom_reset(struct uplcom_softc *sc)
{
        usb_device_request_t req;
	usbd_status err;

        req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
        req.bRequest = UPLCOM_RESET;
        USETW(req.wValue, UPLCOM_RESET);
        USETW(req.wIndex, sc->sc_iface_number);
        USETW(req.wLength, 0);

        err = usbd_do_request(sc->sc_udev, &req, 0);
	if (err)
		return (EIO);

	return (0);
}

void
uplcom_set_line_state(struct uplcom_softc *sc)
{
	usb_device_request_t req;
	int ls;

	ls = (sc->sc_dtr ? UCDC_LINE_DTR : 0) |
		(sc->sc_rts ? UCDC_LINE_RTS : 0);
	req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
	req.bRequest = UCDC_SET_CONTROL_LINE_STATE;
	USETW(req.wValue, ls);
	USETW(req.wIndex, sc->sc_iface_number);
	USETW(req.wLength, 0);

	(void)usbd_do_request(sc->sc_udev, &req, 0);

}

void
uplcom_set(void *addr, int portno, int reg, int onoff)
{
	struct uplcom_softc *sc = addr;

	switch (reg) {
	case UCOM_SET_DTR:
		uplcom_dtr(sc, onoff);
		break;
	case UCOM_SET_RTS:
		uplcom_rts(sc, onoff);
		break;
	case UCOM_SET_BREAK:
		uplcom_break(sc, onoff);
		break;
	default:
		break;
	}
}

void
uplcom_dtr(struct uplcom_softc *sc, int onoff)
{

	DPRINTF(("uplcom_dtr: onoff=%d\n", onoff));

	if (sc->sc_dtr == onoff)
		return;
	sc->sc_dtr = onoff;

	uplcom_set_line_state(sc);
}

void
uplcom_rts(struct uplcom_softc *sc, int onoff)
{
	DPRINTF(("uplcom_rts: onoff=%d\n", onoff));

	if (sc->sc_rts == onoff)
		return;
	sc->sc_rts = onoff;

	uplcom_set_line_state(sc);
}

void
uplcom_break(struct uplcom_softc *sc, int onoff)
{
	usb_device_request_t req;

	DPRINTF(("uplcom_break: onoff=%d\n", onoff));

	req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
	req.bRequest = UCDC_SEND_BREAK;
	USETW(req.wValue, onoff ? UCDC_BREAK_ON : UCDC_BREAK_OFF);
	USETW(req.wIndex, sc->sc_iface_number);
	USETW(req.wLength, 0);

	(void)usbd_do_request(sc->sc_udev, &req, 0);
}

usbd_status
uplcom_set_line_coding(struct uplcom_softc *sc, usb_cdc_line_state_t *state)
{
	usb_device_request_t req;
	usbd_status err;

	DPRINTF(("uplcom_set_line_coding: rate=%d fmt=%d parity=%d bits=%d\n",
		UGETDW(state->dwDTERate), state->bCharFormat,
		state->bParityType, state->bDataBits));

	if (memcmp(state, &sc->sc_line_state, UCDC_LINE_STATE_LENGTH) == 0) {
		DPRINTF(("uplcom_set_line_coding: already set\n"));
		return (USBD_NORMAL_COMPLETION);
	}

	req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
	req.bRequest = UCDC_SET_LINE_CODING;
	USETW(req.wValue, 0);
	USETW(req.wIndex, sc->sc_iface_number);
	USETW(req.wLength, UCDC_LINE_STATE_LENGTH);

	err = usbd_do_request(sc->sc_udev, &req, state);
	if (err) {
		DPRINTF(("uplcom_set_line_coding: failed, err=%s\n",
			usbd_errstr(err)));
		return (err);
	}

	sc->sc_line_state = *state;

	return (USBD_NORMAL_COMPLETION);
}

int
uplcom_param(void *addr, int portno, struct termios *t)
{
	struct uplcom_softc *sc = addr;
	usbd_status err;
	usb_cdc_line_state_t ls;

	DPRINTF(("uplcom_param: sc=%p\n", sc));

	USETDW(ls.dwDTERate, t->c_ospeed);
	if (ISSET(t->c_cflag, CSTOPB))
		ls.bCharFormat = UCDC_STOP_BIT_2;
	else
		ls.bCharFormat = UCDC_STOP_BIT_1;
	if (ISSET(t->c_cflag, PARENB)) {
		if (ISSET(t->c_cflag, PARODD))
			ls.bParityType = UCDC_PARITY_ODD;
		else
			ls.bParityType = UCDC_PARITY_EVEN;
	} else
		ls.bParityType = UCDC_PARITY_NONE;
	switch (ISSET(t->c_cflag, CSIZE)) {
	case CS5:
		ls.bDataBits = 5;
		break;
	case CS6:
		ls.bDataBits = 6;
		break;
	case CS7:
		ls.bDataBits = 7;
		break;
	case CS8:
		ls.bDataBits = 8;
		break;
	}

	err = uplcom_set_line_coding(sc, &ls);
	if (err) {
		DPRINTF(("uplcom_param: err=%s\n", usbd_errstr(err)));
		return (EIO);
	}
	return (0);
}

int
uplcom_open(void *addr, int portno)
{
	struct uplcom_softc *sc = addr;
	int err;

	if (sc->sc_dying)
		return (EIO);

	DPRINTF(("uplcom_open: sc=%p\n", sc));

	if (sc->sc_intr_number != -1 && sc->sc_intr_pipe == NULL) {
		sc->sc_status = 0; /* clear status bit */
		sc->sc_intr_buf = malloc(sc->sc_isize, M_USBDEV, M_WAITOK);
		err = usbd_open_pipe_intr(sc->sc_iface, sc->sc_intr_number,
			USBD_SHORT_XFER_OK, &sc->sc_intr_pipe, sc,
			sc->sc_intr_buf, sc->sc_isize,
			uplcom_intr, USBD_DEFAULT_INTERVAL);
		if (err) {
			DPRINTF(("%s: cannot open interrupt pipe (addr %d)\n",
				USBDEVNAME(sc->sc_dev), sc->sc_intr_number));
					return (EIO);
		}
	}

	return (0);
}

void
uplcom_close(void *addr, int portno)
{
	struct uplcom_softc *sc = addr;
	int err;

	if (sc->sc_dying)
		return;

	DPRINTF(("uplcom_close: close\n"));

	if (sc->sc_intr_pipe != NULL) {
		err = usbd_abort_pipe(sc->sc_intr_pipe);
		if (err)
			printf("%s: abort interrupt pipe failed: %s\n",
				USBDEVNAME(sc->sc_dev), usbd_errstr(err));
		err = usbd_close_pipe(sc->sc_intr_pipe);
		if (err)
			printf("%s: close interrupt pipe failed: %s\n",
				USBDEVNAME(sc->sc_dev), usbd_errstr(err));
		free(sc->sc_intr_buf, M_USBDEV);
		sc->sc_intr_pipe = NULL;
	}
}

void
uplcom_intr(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status)
{
	struct uplcom_softc *sc = priv;
	u_char *buf = sc->sc_intr_buf;
	u_char pstatus;

	if (sc->sc_dying)
		return;

	if (status != USBD_NORMAL_COMPLETION) {
		if (status == USBD_NOT_STARTED || status == USBD_CANCELLED)
			return;

		DPRINTF(("%s: abnormal status: %s\n", USBDEVNAME(sc->sc_dev),
			usbd_errstr(status)));
		usbd_clear_endpoint_stall_async(sc->sc_intr_pipe);
		return;
	}

	DPRINTF(("%s: uplcom status = %02x\n", USBDEVNAME(sc->sc_dev), buf[8]));

	sc->sc_lsr = sc->sc_msr = 0;
	pstatus = buf[8];
	if (ISSET(pstatus, RSAQ_STATUS_DSR))
		sc->sc_msr |= UMSR_DSR;
	if (ISSET(pstatus, RSAQ_STATUS_DCD))
		sc->sc_msr |= UMSR_DCD;
	ucom_status_change((struct ucom_softc *) sc->sc_subdev);
}

void
uplcom_get_status(void *addr, int portno, u_char *lsr, u_char *msr)
{
	struct uplcom_softc *sc = addr;

	DPRINTF(("uplcom_get_status:\n"));

	if (lsr != NULL)
		*lsr = sc->sc_lsr;
	if (msr != NULL)
		*msr = sc->sc_msr;
}

#if TODO
int
uplcom_ioctl(void *addr, int portno, u_long cmd, caddr_t data, int flag,
	     struct proc *p)
{
	struct uplcom_softc *sc = addr;
	int error = 0;

	if (sc->sc_dying)
		return (EIO);

	DPRINTF(("uplcom_ioctl: cmd=0x%08lx\n", cmd));

	switch (cmd) {
	case TIOCNOTTY:
	case TIOCMGET:
	case TIOCMSET:
	case USB_GET_CM_OVER_DATA:
	case USB_SET_CM_OVER_DATA:
		break;

	default:
		DPRINTF(("uplcom_ioctl: unknown\n"));
		error = ENOTTY;
		break;
	}

	return (error);
}
#endif