xref: /src/sys/dev/usb/usb_subr.c

/*	$NetBSD: usb_subr.c,v 1.10 1998/12/02 17:20:20 augustss Exp $	*/

/*
 * Copyright (c) 1998 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Lennart Augustsson (augustss (at) carlstedt.se) at
 * Carlstedt Research & Technology.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *        This product includes software developed by the NetBSD
 *        Foundation, Inc. and its contributors.
 * 4. Neither the name of The NetBSD Foundation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/device.h>
#include <sys/proc.h>
#include <sys/select.h>

#include <dev/usb/usb.h>

#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
#include <dev/usb/usbdivar.h>
#include <dev/usb/usbdevs.h>
#include <dev/usb/usb_quirks.h>

#include "opt_usbverbose.h"

#ifdef USB_DEBUG
#define DPRINTF(x)	if (usbdebug) printf x
#define DPRINTFN(n,x)	if (usbdebug>(n)) printf x
extern int usbdebug;
#else
#define DPRINTF(x)
#define DPRINTFN(n,x)
#endif

static usbd_status	usbd_set_config __P((usbd_device_handle, int));
char *usbd_get_string __P((usbd_device_handle, int, char *));
usbd_status usbd_get_desc __P((usbd_device_handle dev, int type,
			       int index, int len, void *desc));
int usbd_getnewaddr __P((usbd_bus_handle bus));
int usbd_print __P((void *aux, const char *pnp));
int usbd_submatch __P((struct device *, struct cfdata *cf, void *));
usb_interface_descriptor_t *usbd_find_idesc __P((usb_config_descriptor_t *cd,
						 int ino, int ano));
usbd_status usbd_fill_iface_data __P((usbd_device_handle dev, int i, int a));
void usbd_free_iface_data __P((usbd_device_handle dev, int ifcno));
void usbd_kill_pipe __P((usbd_pipe_handle));

#ifdef USBVERBOSE
typedef u_int16_t usb_vendor_id_t;
typedef u_int16_t usb_product_id_t;

/*
 * Descriptions of of known vendors and devices ("products").
 */
struct usb_knowndev {
	usb_vendor_id_t		vendor;
	usb_product_id_t	product;
	int			flags;
	char			*vendorname, *productname;
};
#define	USB_KNOWNDEV_NOPROD	0x01		/* match on vendor only */

#include <dev/usb/usbdevs_data.h>
#endif /* USBVERBOSE */


char *
usbd_get_string(dev, si, buf)
	usbd_device_handle dev;
	int si;
	char *buf;
{
	int swap = dev->quirks->uq_flags & UQ_SWAP_UNICODE;
	usb_device_request_t req;
	usb_string_descriptor_t us;
	char *s;
	int i, n;
	u_int16_t c;
	usbd_status r;

	if (si == 0)
		return 0;
	req.bmRequestType = UT_READ_DEVICE;
	req.bRequest = UR_GET_DESCRIPTOR;
	USETW2(req.wValue, UDESC_STRING, si);
	USETW(req.wIndex, 0);
	USETW(req.wLength, 1);	/* only size byte first */
	r = usbd_do_request(dev, &req, &us);
	if (r != USBD_NORMAL_COMPLETION)
		return 0;
	USETW(req.wLength, us.bLength);	/* the whole string */
	r = usbd_do_request(dev, &req, &us);
	if (r != USBD_NORMAL_COMPLETION)
		return 0;
	s = buf;
	n = us.bLength / 2 - 1;
	for (i = 0; i < n; i++) {
		c = UGETW(us.bString[i]);
		/* Convert from Unicode, handle buggy strings. */
		if ((c & 0xff00) == 0)
			*s++ = c;
		else if ((c & 0x00ff) == 0 && swap)
			*s++ = c >> 8;
		else
			*s++ = '?';
	}
	*s++ = 0;
	return buf;
}

void
usbd_devinfo_vp(dev, v, p)
	usbd_device_handle dev;
	char *v, *p;
{
	usb_device_descriptor_t *udd = &dev->ddesc;
	char *vendor = 0, *product = 0;
#ifdef USBVERBOSE
	struct usb_knowndev *kdp;
#endif

	vendor = usbd_get_string(dev, udd->iManufacturer, v);
	product = usbd_get_string(dev, udd->iProduct, p);
#ifdef USBVERBOSE
	if (!vendor) {
		for(kdp = usb_knowndevs;
		    kdp->vendorname != NULL;
		    kdp++) {
			if (kdp->vendor == UGETW(udd->idVendor) &&
			    (kdp->product == UGETW(udd->idProduct) ||
			     (kdp->flags & USB_KNOWNDEV_NOPROD) != 0))
				break;
		}
		if (kdp->vendorname == NULL)
			vendor = product = NULL;
		else {
			vendor = kdp->vendorname;
			product = (kdp->flags & USB_KNOWNDEV_NOPROD) == 0 ?
				kdp->productname : NULL;
		}
	}
#endif
	if (vendor)
		strcpy(v, vendor);
	else
		sprintf(v, "vendor 0x%04x", UGETW(udd->idVendor));
	if (product)
		strcpy(p, product);
	else
		sprintf(p, "product 0x%04x", UGETW(udd->idProduct));
}

int
usbd_printBCD(cp, bcd)
	char *cp;
	int bcd;
{
	return (sprintf(cp, "%x.%02x", bcd >> 8, bcd & 0xff));
}

void
usbd_devinfo(dev, showclass, cp)
	usbd_device_handle dev;
	int showclass;
	char *cp;
{
	usb_device_descriptor_t *udd = &dev->ddesc;
	char vendor[USB_MAX_STRING_LEN];
	char product[USB_MAX_STRING_LEN];
	int bcdDevice, bcdUSB;

	usbd_devinfo_vp(dev, vendor, product);
	cp += sprintf(cp, "addr %d, %s %s", dev->address, vendor, product);
	if (showclass)
		cp += sprintf(cp, " (class %d/%d)",
			      udd->bDeviceClass, udd->bDeviceSubClass);
	bcdUSB = UGETW(udd->bcdUSB);
	bcdDevice = UGETW(udd->bcdDevice);
	cp += sprintf(cp, " (rev ");
	cp += usbd_printBCD(cp, bcdUSB);
	*cp++ = '/';
	cp += usbd_printBCD(cp, bcdDevice);
	*cp++ = ')';
	*cp = 0;
}

/* Delay for a certain number of ms */
void
usbd_delay_ms(bus, ms)
	usbd_bus_handle bus;
	int ms;
{
	/* Wait at least two clock ticks so we know the time has passed. */
	if (bus->use_polling)
		delay((ms+1) * 1000);
	else
		tsleep(&ms, PRIBIO, "usbdly", (ms*hz+999)/1000 + 1);
}

usbd_status
usbd_reset_port(dev, port, ps)
	usbd_device_handle dev;
	int port;
	usb_port_status_t *ps;
{
	usb_device_request_t req;
	usbd_status r;
	int n;

	req.bmRequestType = UT_WRITE_CLASS_OTHER;
	req.bRequest = UR_SET_FEATURE;
	USETW(req.wValue, UHF_PORT_RESET);
	USETW(req.wIndex, port);
	USETW(req.wLength, 0);
	r = usbd_do_request(dev, &req, 0);
	DPRINTFN(1,("usbd_reset_port: port %d reset done, error=%d\n",
		    port, r));
	if (r != USBD_NORMAL_COMPLETION)
		return (r);
	n = 10;
	do {
		/* Wait for device to recover from reset. */
		usbd_delay_ms(dev->bus, USB_PORT_RESET_DELAY);
		r = usbd_get_port_status(dev, port, ps);
		if (r != USBD_NORMAL_COMPLETION) {
			DPRINTF(("usbd_reset_port: get status failed %d\n",r));
			return (r);
		}
	} while ((UGETW(ps->wPortChange) & UPS_C_PORT_RESET) == 0 && --n > 0);
	if (n == 0) {
		printf("usbd_reset_port: timeout\n");
		return (USBD_IOERROR);
	}
	r = usbd_clear_port_feature(dev, port, UHF_C_PORT_RESET);
#ifdef USB_DEBUG
	if (r != USBD_NORMAL_COMPLETION)
		DPRINTF(("usbd_reset_port: clear port feature failed %d\n",r));
#endif
	return (r);
}

usb_interface_descriptor_t *
usbd_find_idesc(cd, ino, ano)
	usb_config_descriptor_t *cd;
	int ino;
	int ano;
{
	char *p = (char *)cd;
	char *end = p + UGETW(cd->wTotalLength);
	usb_interface_descriptor_t *d;

	for (; p < end; p += d->bLength) {
		d = (usb_interface_descriptor_t *)p;
		if (p + d->bLength <= end &&
		    d->bDescriptorType == UDESC_INTERFACE &&
		    d->bInterfaceNumber == ino && d->bAlternateSetting == ano)
			return (d);
	}
	return (0);
}

usbd_status
usbd_fill_iface_data(dev, ino, ano)
	usbd_device_handle dev;
	int ino;
	int ano;
{
	usbd_interface_handle ifc = &dev->ifaces[ino];
	usb_endpoint_descriptor_t *ed;
	char *p, *end;
	int endpt, nendpt;
	usbd_status r;

	DPRINTFN(5,("usbd_fill_iface_data: ino=%d ano=%d\n", ino, ano));
	ifc->device = dev;
	ifc->state = USBD_INTERFACE_ACTIVE;
	ifc->idesc = usbd_find_idesc(dev->cdesc, ino, ano);
	if (ifc->idesc == 0)
		return (USBD_INVAL);
	nendpt = ifc->idesc->bNumEndpoints;
	DPRINTFN(10,("usbd_fill_iface_data: found idesc n=%d\n", nendpt));
	if (nendpt != 0) {
		ifc->endpoints = malloc(nendpt * sizeof(struct usbd_endpoint),
					M_USB, M_NOWAIT);
		if (ifc->endpoints == 0)
			return (USBD_NOMEM);
	} else
		ifc->endpoints = 0;
	ifc->priv = 0;
	p = (char *)ifc->idesc + ifc->idesc->bLength;
	end = (char *)dev->cdesc + UGETW(dev->cdesc->wTotalLength);
	for (endpt = 0; endpt < nendpt; endpt++) {
		DPRINTFN(10,("usbd_fill_iface_data: endpt=%d\n", endpt));
		for (; p < end; p += ed->bLength) {
			ed = (usb_endpoint_descriptor_t *)p;
			DPRINTFN(10,("usbd_fill_iface_data: p=%p end=%p len=%d type=%d\n",
				 p, end, ed->bLength, ed->bDescriptorType));
			if (p + ed->bLength <= end &&
			    ed->bDescriptorType == UDESC_ENDPOINT)
				goto found;
			if (ed->bDescriptorType == UDESC_INTERFACE)
				break;
		}
		r = USBD_INVAL;
		goto bad;
	found:
		ifc->endpoints[endpt].edesc = ed;
		ifc->endpoints[endpt].state = USBD_ENDPOINT_ACTIVE;
		ifc->endpoints[endpt].refcnt = 0;
		ifc->endpoints[endpt].toggle = 0;
	}
	LIST_INIT(&ifc->pipes);
	return (USBD_NORMAL_COMPLETION);
 bad:
	free(ifc->endpoints, M_USB);
	return (r);
}

void
usbd_free_iface_data(dev, ifcno)
	usbd_device_handle dev;
	int ifcno;
{
	usbd_interface_handle ifc = &dev->ifaces[ifcno];
	if (ifc->endpoints)
		free(ifc->endpoints, M_USB);
}

static usbd_status
usbd_set_config(dev, conf)
	usbd_device_handle dev;
	int conf;
{
	usb_device_request_t req;

	req.bmRequestType = UT_WRITE_DEVICE;
	req.bRequest = UR_SET_CONFIG;
	USETW(req.wValue, conf);
	USETW(req.wIndex, 0);
	USETW(req.wLength, 0);
	return (usbd_do_request(dev, &req, 0));
}

usbd_status
usbd_set_config_no(dev, no, msg)
	usbd_device_handle dev;
	int no;
	int msg;
{
	usb_status_t ds;
	usb_hub_status_t hs;
	usb_config_descriptor_t cd, *cdp;
	usbd_status r;
	int ifcno, nifc, len, selfpowered, power;

	DPRINTFN(5, ("usbd_set_config_no: dev=%p no=%d\n", dev, no));

	/* XXX check that all interfaces are idle */
	if (dev->config != 0) {
		DPRINTF(("usbd_set_config_no: free old config\n"));
		/* Free all configuration data structures. */
		nifc = dev->cdesc->bNumInterface;
		for (ifcno = 0; ifcno < nifc; ifcno++)
			usbd_free_iface_data(dev, ifcno);
		free(dev->ifaces, M_USB);
		free(dev->cdesc, M_USB);
		dev->ifaces = 0;
		dev->cdesc = 0;
		dev->config = 0;
		dev->state = USBD_DEVICE_ADDRESSED;
	}

	/* Figure out what config number to use. */
	r = usbd_get_config_desc(dev, no, &cd);
	if (r != USBD_NORMAL_COMPLETION)
		return (r);
	len = UGETW(cd.wTotalLength);
	cdp = malloc(len, M_USB, M_NOWAIT);
	if (cdp == 0)
		return (USBD_NOMEM);
	r = usbd_get_desc(dev, UDESC_CONFIG, no, len, cdp);
	if (r != USBD_NORMAL_COMPLETION)
		goto bad;
	selfpowered = 0;
	if (cdp->bmAttributes & UC_SELF_POWERED) {
		/* May be self powered. */
		if (cdp->bmAttributes & UC_BUS_POWERED) {
			/* Must ask device. */
			if (dev->quirks->uq_flags & UQ_HUB_POWER) {
				/* Buggy hub, use hub descriptor. */
				r = usbd_get_hub_status(dev, &hs);
				if (r == USBD_NORMAL_COMPLETION &&
				    !(UGETW(hs.wHubStatus) & UHS_LOCAL_POWER))
					selfpowered = 1;
			} else {
				r = usbd_get_device_status(dev, &ds);
				if (r == USBD_NORMAL_COMPLETION &&
				    (UGETW(ds.wStatus) & UDS_SELF_POWERED))
					selfpowered = 1;
			}
			DPRINTF(("usbd_set_config_no: status=0x%04x, error=%d\n",
				 UGETW(ds.wStatus), r));
		} else
			selfpowered = 1;
	}
	DPRINTF(("usbd_set_config_no: (addr %d) attr=0x%02x, selfpowered=%d, power=%d, powerquirk=%x\n",
		 dev->address, cdp->bmAttributes,
		 selfpowered, cdp->bMaxPower * 2,
		 dev->quirks->uq_flags & UQ_HUB_POWER));
#ifdef USB_DEBUG
	if (!dev->powersrc) {
		printf("usbd_set_config_no: No power source?\n");
		return (EIO);
	}
#endif
	power = cdp->bMaxPower * 2;
	if (power > dev->powersrc->power) {
		/* XXX print nicer message. */
		if (msg)
			printf("%s: device addr %d (config %d) exceeds power budget, %d mA > %d mA\n",
			       dev->bus->bdev.dv_xname, dev->address,
			       cdp->bConfigurationValue,
			       power, dev->powersrc->power);
		r = USBD_NO_POWER;
		goto bad;
	}
	dev->power = power;
	dev->self_powered = selfpowered;

	r = usbd_set_config(dev, cdp->bConfigurationValue);
	if (r != USBD_NORMAL_COMPLETION) {
		DPRINTF(("usbd_set_config_no: setting config=%d failed, error=%d\n",
			 cdp->bConfigurationValue, r));
		goto bad;
	}
	DPRINTF(("usbd_set_config_no: setting new config %d\n",
		 cdp->bConfigurationValue));
	nifc = cdp->bNumInterface;
	dev->ifaces = malloc(nifc * sizeof(struct usbd_interface),
			     M_USB, M_NOWAIT);
	if (dev->ifaces == 0) {
		r = USBD_NOMEM;
		goto bad;
	}
	DPRINTFN(5,("usbd_set_config_no: dev=%p cdesc=%p\n", dev, cdp));
	dev->cdesc = cdp;
	dev->config = cdp->bConfigurationValue;
	dev->state = USBD_DEVICE_CONFIGURED;
	for (ifcno = 0; ifcno < nifc; ifcno++) {
		r = usbd_fill_iface_data(dev, ifcno, 0);
		if (r != USBD_NORMAL_COMPLETION) {
			while (--ifcno >= 0)
				usbd_free_iface_data(dev, ifcno);
			goto bad;
		}
	}

	return (USBD_NORMAL_COMPLETION);

 bad:
	free(cdp, M_USB);
	return (r);
}

/* XXX add function for alternate settings */

usbd_status
usbd_setup_pipe(dev, iface, ep, pipe)
	usbd_device_handle dev;
	usbd_interface_handle iface;
	struct usbd_endpoint *ep;
	usbd_pipe_handle *pipe;
{
	usbd_pipe_handle p;
	usbd_status r;

	DPRINTFN(1,("usbd_setup_pipe: dev=%p iface=%p ep=%p pipe=%p\n",
		    dev, iface, ep, pipe));
	p = malloc(dev->bus->pipe_size, M_USB, M_NOWAIT);
	if (p == 0)
		return (USBD_NOMEM);
	p->device = dev;
	p->iface = iface;
	p->state = USBD_PIPE_ACTIVE;
	p->endpoint = ep;
	ep->refcnt++;
	p->refcnt = 1;
	p->intrreqh = 0;
	p->running = 0;
	SIMPLEQ_INIT(&p->queue);
	r = dev->bus->open_pipe(p);
	if (r != USBD_NORMAL_COMPLETION) {
		DPRINTF(("usbd_setup_pipe: endpoint=%d failed, error=%d\n",
			 ep->edesc->bEndpointAddress, r));
		free(p, M_USB);
		return (r);
	}
	*pipe = p;
	return (USBD_NORMAL_COMPLETION);
}

/* Abort the device control pipe. */
void
usbd_kill_pipe(pipe)
	usbd_pipe_handle pipe;
{
	pipe->methods->close(pipe);
	pipe->endpoint->refcnt--;
	free(pipe, M_USB);
}

int
usbd_getnewaddr(bus)
	usbd_bus_handle bus;
{
	int i;

	for (i = 1; i < USB_MAX_DEVICES; i++)
		if (bus->devices[i] == 0)
			return (i);
	return (-1);
}

/*
 * Called when a new device has been put in the powered state,
 * but not yet in the addressed state.
 * Get initial descriptor, set the address, get full descriptor,
 * and attach a driver.
 */
usbd_status
usbd_new_device(parent, bus, depth, lowspeed, port, up)
	struct device *parent;
	usbd_bus_handle bus;
	int depth;
	int lowspeed;
	int port;
	struct usbd_port *up;
{
	usbd_device_handle dev;
	usb_device_descriptor_t *d;
	usbd_status r;
	struct usb_attach_arg uaa;
	int addr;
	int found, i, confi;

	DPRINTF(("usbd_new_device bus=%p depth=%d lowspeed=%d\n",
		 bus, depth, lowspeed));
	addr = usbd_getnewaddr(bus);
	if (addr < 0) {
		printf("%s: No free USB addresses, new device ignored.\n",
		       bus->bdev.dv_xname);
		return (USBD_NO_ADDR);
	}

	dev = malloc(sizeof *dev, M_USB, M_NOWAIT);
	if (dev == 0)
		return (USBD_NOMEM);
	memset(dev, 0, sizeof(*dev));

	dev->bus = bus;

	/* Set up default endpoint handle. */
	dev->def_ep.edesc = &dev->def_ep_desc;
	dev->def_ep.state = USBD_ENDPOINT_ACTIVE;
	dev->def_ep.refcnt = 0;
	dev->def_ep.toggle = 0;	/* XXX */

	/* Set up default endpoint descriptor. */
	dev->def_ep_desc.bLength = USB_ENDPOINT_DESCRIPTOR_SIZE;
	dev->def_ep_desc.bDescriptorType = UDESC_ENDPOINT;
	dev->def_ep_desc.bEndpointAddress = USB_CONTROL_ENDPOINT;
	dev->def_ep_desc.bmAttributes = UE_CONTROL;
	USETW(dev->def_ep_desc.wMaxPacketSize, USB_MAX_IPACKET);
	dev->def_ep_desc.bInterval = 0;

	dev->state = USBD_DEVICE_DEFAULT;
	dev->quirks = &usbd_no_quirk;
	dev->address = USB_START_ADDR;
	dev->ddesc.bMaxPacketSize = 0;
	dev->lowspeed = lowspeed != 0;
	dev->depth = depth;
	dev->powersrc = up;

	/* Establish the the default pipe. */
	r = usbd_setup_pipe(dev, 0, &dev->def_ep, &dev->default_pipe);
	if (r != USBD_NORMAL_COMPLETION)
		goto bad1;

	up->device = dev;
	d = &dev->ddesc;
	/* Try a few times in case the device is slow (i.e. outside specs.) */
	for (i = 0; i < 5; i++) {
		/* Get the first 8 bytes of the device descriptor. */
		r = usbd_get_desc(dev, UDESC_DEVICE, 0, USB_MAX_IPACKET, d);
		if (r == USBD_NORMAL_COMPLETION)
			break;
		usbd_delay_ms(dev->bus, 200);
	}
	if (r != USBD_NORMAL_COMPLETION) {
		DPRINTFN(-1, ("usbd_new_device: addr=%d, getting first desc failed\n",
			      addr));
		goto bad;
	}

	DPRINTF(("usbd_new_device: adding unit addr=%d, rev=%02x, class=%d, subclass=%d, protocol=%d, maxpacket=%d, ls=%d\n",
		 addr, UGETW(d->bcdUSB), d->bDeviceClass, d->bDeviceSubClass,
		 d->bDeviceProtocol, d->bMaxPacketSize, dev->lowspeed));

	USETW(dev->def_ep_desc.wMaxPacketSize, d->bMaxPacketSize);

	/* Get the full device descriptor. */
	r = usbd_get_device_desc(dev, d);
	if (r != USBD_NORMAL_COMPLETION) {
		DPRINTFN(-1, ("usbd_new_device: addr=%d, getting full desc failed\n", addr));
		goto bad;
	}

	/* Figure out what's wrong with this device. */
	dev->quirks = usbd_find_quirk(d);

	/* Set the address */
	r = usbd_set_address(dev, addr);
	if (r != USBD_NORMAL_COMPLETION) {
		DPRINTFN(-1,("usb_new_device: set address %d failed\n",addr));
		r = USBD_SET_ADDR_FAILED;
		goto bad;
	}
	dev->address = addr;	/* New device address now */
	dev->state = USBD_DEVICE_ADDRESSED;
	bus->devices[addr] = dev;

	/* Assume 100mA bus powered for now. Changed when configured. */
	dev->power = USB_MIN_POWER;
	dev->self_powered = 0;

	DPRINTF(("usbd_new_device: new dev (addr %d), dev=%p, parent=%p\n",
		 addr, dev, parent));

	uaa.device = dev;
	uaa.iface = 0;
	uaa.usegeneric = 0;
	uaa.port = port;
	/* First try with device specific drivers. */
	if (config_found_sm(parent, &uaa, usbd_print, usbd_submatch) != 0)
		return (USBD_NORMAL_COMPLETION);

	DPRINTF(("usbd_new_device: no device driver found\n"));

	/* Next try with interface drivers. */
	for (confi = 0; confi < d->bNumConfigurations; confi++) {
		r = usbd_set_config_no(dev, confi, 1);
		if (r != USBD_NORMAL_COMPLETION) {
			printf("%s: set config at addr %d failed, error=%d\n",
			       parent->dv_xname, addr, r);
			goto bad;
		}
		for (found = i = 0; i < dev->cdesc->bNumInterface; i++) {
			uaa.iface = &dev->ifaces[i];
			if (config_found_sm(parent, &uaa, usbd_print,
					    usbd_submatch))
				found++;
		}
		if (found != 0)
			return (USBD_NORMAL_COMPLETION);
	}
	/* No interfaces were attached in any of the configurations. */
	if (d->bNumConfigurations > 0)
		usbd_set_config_no(dev, 0, 0);

	DPRINTF(("usbd_new_device: no interface drivers found\n"));

	/* Finally try the generic driver. */
	uaa.iface = 0;
	uaa.usegeneric = 1;
	if (config_found_sm(parent, &uaa, usbd_print, usbd_submatch) != 0)
		return (USBD_NORMAL_COMPLETION);

	DPRINTF(("usbd_new_device: generic attach failed\n"));

	return (USBD_NORMAL_COMPLETION);

 bad:
	usbd_kill_pipe(dev->default_pipe);
 bad1:
	up->device = 0;
	bus->devices[addr] = 0;
	free(dev, M_USB);
	return (r);
}

int
usbd_print(aux, pnp)
	void *aux;
	const char *pnp;
{
	struct usb_attach_arg *uaa = aux;
	char devinfo[1024];

	DPRINTFN(15, ("usbd_print dev=%p\n", uaa->device));
	if (pnp) {
		if (!uaa->usegeneric)
			return (QUIET);
		usbd_devinfo(uaa->device, 1, devinfo);
		printf("%s: %s", pnp, devinfo);
	}
	if (uaa->port != 0)
		printf(", port %d", uaa->port);
	return (UNCONF);
}

int
usbd_submatch(parent, cf, aux)
	struct device *parent;
	struct cfdata *cf;
	void *aux;
{
	struct usb_attach_arg *uaa = aux;

	if (uaa->port != 0 &&
	    cf->uhubcf_port != UHUB_UNK_PORT &&
	    cf->uhubcf_port != uaa->port)
		return 0;
	return ((*cf->cf_attach->ca_match)(parent, cf, aux));
}