usb_subr.c revision 1.162.12.1 1 1.162.12.1 matt /* $NetBSD: usb_subr.c,v 1.162.12.1 2013/11/05 18:36:31 matt Exp $ */
2 1.56 augustss /* $FreeBSD: src/sys/dev/usb/usb_subr.c,v 1.18 1999/11/17 22:33:47 n_hibma Exp $ */
3 1.1 augustss
4 1.1 augustss /*
5 1.121 mycroft * Copyright (c) 1998, 2004 The NetBSD Foundation, Inc.
6 1.1 augustss * All rights reserved.
7 1.1 augustss *
8 1.9 augustss * This code is derived from software contributed to The NetBSD Foundation
9 1.76 augustss * by Lennart Augustsson (lennart (at) augustsson.net) at
10 1.9 augustss * Carlstedt Research & Technology.
11 1.1 augustss *
12 1.1 augustss * Redistribution and use in source and binary forms, with or without
13 1.1 augustss * modification, are permitted provided that the following conditions
14 1.1 augustss * are met:
15 1.1 augustss * 1. Redistributions of source code must retain the above copyright
16 1.1 augustss * notice, this list of conditions and the following disclaimer.
17 1.1 augustss * 2. Redistributions in binary form must reproduce the above copyright
18 1.1 augustss * notice, this list of conditions and the following disclaimer in the
19 1.1 augustss * documentation and/or other materials provided with the distribution.
20 1.1 augustss *
21 1.1 augustss * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
22 1.1 augustss * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
23 1.1 augustss * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
24 1.1 augustss * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
25 1.1 augustss * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
26 1.1 augustss * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
27 1.1 augustss * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
28 1.1 augustss * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
29 1.1 augustss * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
30 1.1 augustss * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
31 1.1 augustss * POSSIBILITY OF SUCH DAMAGE.
32 1.1 augustss */
33 1.91 lukem
34 1.91 lukem #include <sys/cdefs.h>
35 1.162.12.1 matt __KERNEL_RCSID(0, "$NetBSD: usb_subr.c,v 1.162.12.1 2013/11/05 18:36:31 matt Exp $");
36 1.104 martin
37 1.140 pavel #include "opt_compat_netbsd.h"
38 1.104 martin #include "opt_usbverbose.h"
39 1.1 augustss
40 1.1 augustss #include <sys/param.h>
41 1.1 augustss #include <sys/systm.h>
42 1.1 augustss #include <sys/kernel.h>
43 1.1 augustss #include <sys/malloc.h>
44 1.1 augustss #include <sys/device.h>
45 1.56 augustss #include <sys/select.h>
46 1.1 augustss #include <sys/proc.h>
47 1.46 augustss
48 1.149 ad #include <sys/bus.h>
49 1.1 augustss
50 1.1 augustss #include <dev/usb/usb.h>
51 1.1 augustss
52 1.1 augustss #include <dev/usb/usbdi.h>
53 1.1 augustss #include <dev/usb/usbdi_util.h>
54 1.1 augustss #include <dev/usb/usbdivar.h>
55 1.1 augustss #include <dev/usb/usbdevs.h>
56 1.1 augustss #include <dev/usb/usb_quirks.h>
57 1.1 augustss
58 1.158 drochner #include "locators.h"
59 1.158 drochner
60 1.1 augustss #ifdef USB_DEBUG
61 1.35 augustss #define DPRINTF(x) if (usbdebug) logprintf x
62 1.35 augustss #define DPRINTFN(n,x) if (usbdebug>(n)) logprintf x
63 1.1 augustss extern int usbdebug;
64 1.1 augustss #else
65 1.1 augustss #define DPRINTF(x)
66 1.1 augustss #define DPRINTFN(n,x)
67 1.1 augustss #endif
68 1.1 augustss
69 1.82 augustss Static usbd_status usbd_set_config(usbd_device_handle, int);
70 1.124 augustss Static void usbd_devinfo(usbd_device_handle, int, char *, size_t);
71 1.123 augustss Static void usbd_devinfo_vp(usbd_device_handle dev,
72 1.139 pavel char *v,
73 1.139 pavel char *p, int usedev,
74 1.139 pavel int useencoded );
75 1.78 augustss Static int usbd_getnewaddr(usbd_bus_handle bus);
76 1.118 drochner Static int usbd_print(void *, const char *);
77 1.144 drochner Static int usbd_ifprint(void *, const char *);
78 1.162.12.1 matt Static void usbd_free_iface_data(usbd_device_handle, int);
79 1.155 drochner usbd_status usbd_attach_roothub(device_t, usbd_device_handle);
80 1.1 augustss
81 1.162.12.1 matt uint32_t usb_cookie_no = 0;
82 1.27 augustss
83 1.1 augustss #ifdef USBVERBOSE
84 1.1 augustss typedef u_int16_t usb_vendor_id_t;
85 1.1 augustss typedef u_int16_t usb_product_id_t;
86 1.1 augustss
87 1.1 augustss /*
88 1.1 augustss * Descriptions of of known vendors and devices ("products").
89 1.1 augustss */
90 1.122 mycroft struct usb_vendor {
91 1.122 mycroft usb_vendor_id_t vendor;
92 1.126 christos const char *vendorname;
93 1.122 mycroft };
94 1.122 mycroft struct usb_product {
95 1.1 augustss usb_vendor_id_t vendor;
96 1.1 augustss usb_product_id_t product;
97 1.126 christos const char *productname;
98 1.1 augustss };
99 1.1 augustss
100 1.1 augustss #include <dev/usb/usbdevs_data.h>
101 1.1 augustss #endif /* USBVERBOSE */
102 1.1 augustss
103 1.84 jdolecek Static const char * const usbd_error_strs[] = {
104 1.12 augustss "NORMAL_COMPLETION",
105 1.12 augustss "IN_PROGRESS",
106 1.12 augustss "PENDING_REQUESTS",
107 1.12 augustss "NOT_STARTED",
108 1.12 augustss "INVAL",
109 1.12 augustss "NOMEM",
110 1.12 augustss "CANCELLED",
111 1.12 augustss "BAD_ADDRESS",
112 1.12 augustss "IN_USE",
113 1.12 augustss "NO_ADDR",
114 1.12 augustss "SET_ADDR_FAILED",
115 1.12 augustss "NO_POWER",
116 1.12 augustss "TOO_DEEP",
117 1.12 augustss "IOERROR",
118 1.12 augustss "NOT_CONFIGURED",
119 1.12 augustss "TIMEOUT",
120 1.12 augustss "SHORT_XFER",
121 1.12 augustss "STALLED",
122 1.33 augustss "INTERRUPTED",
123 1.12 augustss "XXX",
124 1.12 augustss };
125 1.1 augustss
126 1.42 thorpej const char *
127 1.78 augustss usbd_errstr(usbd_status err)
128 1.39 augustss {
129 1.39 augustss static char buffer[5];
130 1.39 augustss
131 1.42 thorpej if (err < USBD_ERROR_MAX) {
132 1.39 augustss return usbd_error_strs[err];
133 1.39 augustss } else {
134 1.39 augustss snprintf(buffer, sizeof buffer, "%d", err);
135 1.39 augustss return buffer;
136 1.39 augustss }
137 1.39 augustss }
138 1.39 augustss
139 1.13 augustss usbd_status
140 1.78 augustss usbd_get_string_desc(usbd_device_handle dev, int sindex, int langid,
141 1.114 mycroft usb_string_descriptor_t *sdesc, int *sizep)
142 1.13 augustss {
143 1.13 augustss usb_device_request_t req;
144 1.116 mycroft usbd_status err;
145 1.116 mycroft int actlen;
146 1.13 augustss
147 1.13 augustss req.bmRequestType = UT_READ_DEVICE;
148 1.13 augustss req.bRequest = UR_GET_DESCRIPTOR;
149 1.13 augustss USETW2(req.wValue, UDESC_STRING, sindex);
150 1.13 augustss USETW(req.wIndex, langid);
151 1.146 christos USETW(req.wLength, 2); /* only size byte first */
152 1.116 mycroft err = usbd_do_request_flags(dev, &req, sdesc, USBD_SHORT_XFER_OK,
153 1.116 mycroft &actlen, USBD_DEFAULT_TIMEOUT);
154 1.116 mycroft if (err)
155 1.116 mycroft return (err);
156 1.116 mycroft
157 1.146 christos if (actlen < 2)
158 1.146 christos return (USBD_SHORT_XFER);
159 1.146 christos
160 1.146 christos USETW(req.wLength, sdesc->bLength); /* the whole string */
161 1.146 christos err = usbd_do_request_flags(dev, &req, sdesc, USBD_SHORT_XFER_OK,
162 1.146 christos &actlen, USBD_DEFAULT_TIMEOUT);
163 1.146 christos if (err)
164 1.146 christos return (err);
165 1.146 christos
166 1.116 mycroft if (actlen != sdesc->bLength) {
167 1.116 mycroft DPRINTFN(-1, ("usbd_get_string_desc: expected %d, got %d\n",
168 1.116 mycroft sdesc->bLength, actlen));
169 1.116 mycroft }
170 1.116 mycroft
171 1.116 mycroft *sizep = actlen;
172 1.116 mycroft return (USBD_NORMAL_COMPLETION);
173 1.13 augustss }
174 1.13 augustss
175 1.128 enami static void
176 1.128 enami usbd_trim_spaces(char *p)
177 1.83 augustss {
178 1.128 enami char *q, *e;
179 1.83 augustss
180 1.128 enami q = e = p;
181 1.128 enami while (*q == ' ') /* skip leading spaces */
182 1.85 augustss q++;
183 1.128 enami while ((*p = *q++)) /* copy string */
184 1.128 enami if (*p++ != ' ') /* remember last non-space */
185 1.128 enami e = p;
186 1.128 enami *e = '\0'; /* kill trailing spaces */
187 1.83 augustss }
188 1.83 augustss
189 1.123 augustss Static void
190 1.139 pavel usbd_devinfo_vp(usbd_device_handle dev, char *v,
191 1.139 pavel char *p, int usedev, int useencoded)
192 1.1 augustss {
193 1.1 augustss usb_device_descriptor_t *udd = &dev->ddesc;
194 1.2 is #ifdef USBVERBOSE
195 1.122 mycroft int n;
196 1.2 is #endif
197 1.1 augustss
198 1.128 enami v[0] = p[0] = '\0';
199 1.128 enami if (dev == NULL)
200 1.52 augustss return;
201 1.52 augustss
202 1.82 augustss if (usedev) {
203 1.139 pavel if (usbd_get_string0(dev, udd->iManufacturer, v, useencoded) ==
204 1.128 enami USBD_NORMAL_COMPLETION)
205 1.128 enami usbd_trim_spaces(v);
206 1.139 pavel if (usbd_get_string0(dev, udd->iProduct, p, useencoded) ==
207 1.128 enami USBD_NORMAL_COMPLETION)
208 1.128 enami usbd_trim_spaces(p);
209 1.82 augustss }
210 1.128 enami /* There is no need for strlcpy & snprintf below. */
211 1.1 augustss #ifdef USBVERBOSE
212 1.128 enami if (v[0] == '\0')
213 1.122 mycroft for (n = 0; n < usb_nvendors; n++)
214 1.128 enami if (usb_vendors[n].vendor == UGETW(udd->idVendor)) {
215 1.128 enami strcpy(v, usb_vendors[n].vendorname);
216 1.128 enami break;
217 1.128 enami }
218 1.128 enami if (p[0] == '\0')
219 1.122 mycroft for (n = 0; n < usb_nproducts; n++)
220 1.122 mycroft if (usb_products[n].vendor == UGETW(udd->idVendor) &&
221 1.128 enami usb_products[n].product == UGETW(udd->idProduct)) {
222 1.128 enami strcpy(p, usb_products[n].productname);
223 1.128 enami break;
224 1.128 enami }
225 1.1 augustss #endif
226 1.128 enami if (v[0] == '\0')
227 1.123 augustss sprintf(v, "vendor 0x%04x", UGETW(udd->idVendor));
228 1.128 enami if (p[0] == '\0')
229 1.123 augustss sprintf(p, "product 0x%04x", UGETW(udd->idProduct));
230 1.1 augustss }
231 1.1 augustss
232 1.1 augustss int
233 1.113 itojun usbd_printBCD(char *cp, size_t l, int bcd)
234 1.1 augustss {
235 1.113 itojun return (snprintf(cp, l, "%x.%02x", bcd >> 8, bcd & 0xff));
236 1.1 augustss }
237 1.1 augustss
238 1.124 augustss Static void
239 1.113 itojun usbd_devinfo(usbd_device_handle dev, int showclass, char *cp, size_t l)
240 1.1 augustss {
241 1.1 augustss usb_device_descriptor_t *udd = &dev->ddesc;
242 1.133 christos char *vendor, *product;
243 1.1 augustss int bcdDevice, bcdUSB;
244 1.113 itojun char *ep;
245 1.113 itojun
246 1.133 christos vendor = malloc(USB_MAX_ENCODED_STRING_LEN * 2, M_USB, M_NOWAIT);
247 1.133 christos if (vendor == NULL) {
248 1.133 christos *cp = '\0';
249 1.133 christos return;
250 1.133 christos }
251 1.133 christos product = &vendor[USB_MAX_ENCODED_STRING_LEN];
252 1.133 christos
253 1.113 itojun ep = cp + l;
254 1.1 augustss
255 1.139 pavel usbd_devinfo_vp(dev, vendor, product, 1, 1);
256 1.113 itojun cp += snprintf(cp, ep - cp, "%s %s", vendor, product);
257 1.1 augustss if (showclass)
258 1.113 itojun cp += snprintf(cp, ep - cp, ", class %d/%d",
259 1.113 itojun udd->bDeviceClass, udd->bDeviceSubClass);
260 1.1 augustss bcdUSB = UGETW(udd->bcdUSB);
261 1.1 augustss bcdDevice = UGETW(udd->bcdDevice);
262 1.113 itojun cp += snprintf(cp, ep - cp, ", rev ");
263 1.113 itojun cp += usbd_printBCD(cp, ep - cp, bcdUSB);
264 1.1 augustss *cp++ = '/';
265 1.113 itojun cp += usbd_printBCD(cp, ep - cp, bcdDevice);
266 1.113 itojun cp += snprintf(cp, ep - cp, ", addr %d", dev->address);
267 1.10 augustss *cp = 0;
268 1.133 christos free(vendor, M_USB);
269 1.1 augustss }
270 1.1 augustss
271 1.124 augustss char *
272 1.124 augustss usbd_devinfo_alloc(usbd_device_handle dev, int showclass)
273 1.124 augustss {
274 1.124 augustss char *devinfop;
275 1.124 augustss
276 1.124 augustss devinfop = malloc(DEVINFOSIZE, M_TEMP, M_WAITOK);
277 1.124 augustss usbd_devinfo(dev, showclass, devinfop, DEVINFOSIZE);
278 1.124 augustss return devinfop;
279 1.124 augustss }
280 1.124 augustss
281 1.124 augustss void
282 1.124 augustss usbd_devinfo_free(char *devinfop)
283 1.124 augustss {
284 1.124 augustss free(devinfop, M_TEMP);
285 1.124 augustss }
286 1.124 augustss
287 1.1 augustss /* Delay for a certain number of ms */
288 1.1 augustss void
289 1.78 augustss usb_delay_ms(usbd_bus_handle bus, u_int ms)
290 1.1 augustss {
291 1.1 augustss /* Wait at least two clock ticks so we know the time has passed. */
292 1.64 augustss if (bus->use_polling || cold)
293 1.1 augustss delay((ms+1) * 1000);
294 1.1 augustss else
295 1.1 augustss tsleep(&ms, PRIBIO, "usbdly", (ms*hz+999)/1000 + 1);
296 1.1 augustss }
297 1.1 augustss
298 1.23 augustss /* Delay given a device handle. */
299 1.23 augustss void
300 1.78 augustss usbd_delay_ms(usbd_device_handle dev, u_int ms)
301 1.23 augustss {
302 1.23 augustss usb_delay_ms(dev->bus, ms);
303 1.23 augustss }
304 1.23 augustss
305 1.1 augustss usbd_status
306 1.78 augustss usbd_reset_port(usbd_device_handle dev, int port, usb_port_status_t *ps)
307 1.1 augustss {
308 1.1 augustss usb_device_request_t req;
309 1.53 augustss usbd_status err;
310 1.1 augustss int n;
311 1.99 augustss
312 1.1 augustss req.bmRequestType = UT_WRITE_CLASS_OTHER;
313 1.1 augustss req.bRequest = UR_SET_FEATURE;
314 1.1 augustss USETW(req.wValue, UHF_PORT_RESET);
315 1.1 augustss USETW(req.wIndex, port);
316 1.1 augustss USETW(req.wLength, 0);
317 1.53 augustss err = usbd_do_request(dev, &req, 0);
318 1.39 augustss DPRINTFN(1,("usbd_reset_port: port %d reset done, error=%s\n",
319 1.53 augustss port, usbd_errstr(err)));
320 1.53 augustss if (err)
321 1.53 augustss return (err);
322 1.1 augustss n = 10;
323 1.1 augustss do {
324 1.1 augustss /* Wait for device to recover from reset. */
325 1.23 augustss usbd_delay_ms(dev, USB_PORT_RESET_DELAY);
326 1.53 augustss err = usbd_get_port_status(dev, port, ps);
327 1.53 augustss if (err) {
328 1.53 augustss DPRINTF(("usbd_reset_port: get status failed %d\n",
329 1.53 augustss err));
330 1.53 augustss return (err);
331 1.1 augustss }
332 1.92 augustss /* If the device disappeared, just give up. */
333 1.92 augustss if (!(UGETW(ps->wPortStatus) & UPS_CURRENT_CONNECT_STATUS))
334 1.92 augustss return (USBD_NORMAL_COMPLETION);
335 1.1 augustss } while ((UGETW(ps->wPortChange) & UPS_C_PORT_RESET) == 0 && --n > 0);
336 1.73 augustss if (n == 0)
337 1.73 augustss return (USBD_TIMEOUT);
338 1.53 augustss err = usbd_clear_port_feature(dev, port, UHF_C_PORT_RESET);
339 1.1 augustss #ifdef USB_DEBUG
340 1.53 augustss if (err)
341 1.53 augustss DPRINTF(("usbd_reset_port: clear port feature failed %d\n",
342 1.53 augustss err));
343 1.1 augustss #endif
344 1.18 augustss
345 1.18 augustss /* Wait for the device to recover from reset. */
346 1.23 augustss usbd_delay_ms(dev, USB_PORT_RESET_RECOVERY);
347 1.53 augustss return (err);
348 1.1 augustss }
349 1.1 augustss
350 1.12 augustss usb_interface_descriptor_t *
351 1.78 augustss usbd_find_idesc(usb_config_descriptor_t *cd, int ifaceidx, int altidx)
352 1.12 augustss {
353 1.12 augustss char *p = (char *)cd;
354 1.12 augustss char *end = p + UGETW(cd->wTotalLength);
355 1.12 augustss usb_interface_descriptor_t *d;
356 1.19 augustss int curidx, lastidx, curaidx = 0;
357 1.12 augustss
358 1.19 augustss for (curidx = lastidx = -1; p < end; ) {
359 1.12 augustss d = (usb_interface_descriptor_t *)p;
360 1.18 augustss DPRINTFN(4,("usbd_find_idesc: idx=%d(%d) altidx=%d(%d) len=%d "
361 1.99 augustss "type=%d\n",
362 1.18 augustss ifaceidx, curidx, altidx, curaidx,
363 1.18 augustss d->bLength, d->bDescriptorType));
364 1.12 augustss if (d->bLength == 0) /* bad descriptor */
365 1.12 augustss break;
366 1.12 augustss p += d->bLength;
367 1.12 augustss if (p <= end && d->bDescriptorType == UDESC_INTERFACE) {
368 1.19 augustss if (d->bInterfaceNumber != lastidx) {
369 1.19 augustss lastidx = d->bInterfaceNumber;
370 1.12 augustss curidx++;
371 1.12 augustss curaidx = 0;
372 1.12 augustss } else
373 1.12 augustss curaidx++;
374 1.12 augustss if (ifaceidx == curidx && altidx == curaidx)
375 1.12 augustss return (d);
376 1.12 augustss }
377 1.12 augustss }
378 1.58 augustss return (NULL);
379 1.12 augustss }
380 1.12 augustss
381 1.12 augustss usb_endpoint_descriptor_t *
382 1.99 augustss usbd_find_edesc(usb_config_descriptor_t *cd, int ifaceidx, int altidx,
383 1.78 augustss int endptidx)
384 1.12 augustss {
385 1.12 augustss char *p = (char *)cd;
386 1.12 augustss char *end = p + UGETW(cd->wTotalLength);
387 1.12 augustss usb_interface_descriptor_t *d;
388 1.12 augustss usb_endpoint_descriptor_t *e;
389 1.12 augustss int curidx;
390 1.12 augustss
391 1.12 augustss d = usbd_find_idesc(cd, ifaceidx, altidx);
392 1.53 augustss if (d == NULL)
393 1.58 augustss return (NULL);
394 1.12 augustss if (endptidx >= d->bNumEndpoints) /* quick exit */
395 1.58 augustss return (NULL);
396 1.12 augustss
397 1.12 augustss curidx = -1;
398 1.12 augustss for (p = (char *)d + d->bLength; p < end; ) {
399 1.12 augustss e = (usb_endpoint_descriptor_t *)p;
400 1.12 augustss if (e->bLength == 0) /* bad descriptor */
401 1.12 augustss break;
402 1.12 augustss p += e->bLength;
403 1.12 augustss if (p <= end && e->bDescriptorType == UDESC_INTERFACE)
404 1.58 augustss return (NULL);
405 1.12 augustss if (p <= end && e->bDescriptorType == UDESC_ENDPOINT) {
406 1.12 augustss curidx++;
407 1.12 augustss if (curidx == endptidx)
408 1.12 augustss return (e);
409 1.12 augustss }
410 1.1 augustss }
411 1.58 augustss return (NULL);
412 1.1 augustss }
413 1.1 augustss
414 1.1 augustss usbd_status
415 1.78 augustss usbd_fill_iface_data(usbd_device_handle dev, int ifaceidx, int altidx)
416 1.1 augustss {
417 1.12 augustss usbd_interface_handle ifc = &dev->ifaces[ifaceidx];
418 1.77 augustss usb_interface_descriptor_t *idesc;
419 1.1 augustss char *p, *end;
420 1.1 augustss int endpt, nendpt;
421 1.1 augustss
422 1.18 augustss DPRINTFN(4,("usbd_fill_iface_data: ifaceidx=%d altidx=%d\n",
423 1.14 drochner ifaceidx, altidx));
424 1.77 augustss idesc = usbd_find_idesc(dev->cdesc, ifaceidx, altidx);
425 1.77 augustss if (idesc == NULL)
426 1.77 augustss return (USBD_INVAL);
427 1.1 augustss ifc->device = dev;
428 1.77 augustss ifc->idesc = idesc;
429 1.13 augustss ifc->index = ifaceidx;
430 1.13 augustss ifc->altindex = altidx;
431 1.1 augustss nendpt = ifc->idesc->bNumEndpoints;
432 1.59 augustss DPRINTFN(4,("usbd_fill_iface_data: found idesc nendpt=%d\n", nendpt));
433 1.1 augustss if (nendpt != 0) {
434 1.1 augustss ifc->endpoints = malloc(nendpt * sizeof(struct usbd_endpoint),
435 1.1 augustss M_USB, M_NOWAIT);
436 1.58 augustss if (ifc->endpoints == NULL)
437 1.1 augustss return (USBD_NOMEM);
438 1.1 augustss } else
439 1.58 augustss ifc->endpoints = NULL;
440 1.58 augustss ifc->priv = NULL;
441 1.1 augustss p = (char *)ifc->idesc + ifc->idesc->bLength;
442 1.1 augustss end = (char *)dev->cdesc + UGETW(dev->cdesc->wTotalLength);
443 1.19 augustss #define ed ((usb_endpoint_descriptor_t *)p)
444 1.1 augustss for (endpt = 0; endpt < nendpt; endpt++) {
445 1.1 augustss DPRINTFN(10,("usbd_fill_iface_data: endpt=%d\n", endpt));
446 1.1 augustss for (; p < end; p += ed->bLength) {
447 1.14 drochner DPRINTFN(10,("usbd_fill_iface_data: p=%p end=%p "
448 1.14 drochner "len=%d type=%d\n",
449 1.1 augustss p, end, ed->bLength, ed->bDescriptorType));
450 1.24 augustss if (p + ed->bLength <= end && ed->bLength != 0 &&
451 1.1 augustss ed->bDescriptorType == UDESC_ENDPOINT)
452 1.24 augustss goto found;
453 1.59 augustss if (ed->bLength == 0 ||
454 1.59 augustss ed->bDescriptorType == UDESC_INTERFACE)
455 1.1 augustss break;
456 1.1 augustss }
457 1.24 augustss /* passed end, or bad desc */
458 1.95 augustss printf("usbd_fill_iface_data: bad descriptor(s): %s\n",
459 1.95 augustss ed->bLength == 0 ? "0 length" :
460 1.95 augustss ed->bDescriptorType == UDESC_INTERFACE ? "iface desc":
461 1.95 augustss "out of data");
462 1.24 augustss goto bad;
463 1.24 augustss found:
464 1.1 augustss ifc->endpoints[endpt].edesc = ed;
465 1.95 augustss if (dev->speed == USB_SPEED_HIGH) {
466 1.95 augustss u_int mps;
467 1.95 augustss /* Control and bulk endpoints have max packet limits. */
468 1.95 augustss switch (UE_GET_XFERTYPE(ed->bmAttributes)) {
469 1.95 augustss case UE_CONTROL:
470 1.95 augustss mps = USB_2_MAX_CTRL_PACKET;
471 1.95 augustss goto check;
472 1.95 augustss case UE_BULK:
473 1.95 augustss mps = USB_2_MAX_BULK_PACKET;
474 1.95 augustss check:
475 1.95 augustss if (UGETW(ed->wMaxPacketSize) != mps) {
476 1.95 augustss USETW(ed->wMaxPacketSize, mps);
477 1.95 augustss #ifdef DIAGNOSTIC
478 1.95 augustss printf("usbd_fill_iface_data: bad max "
479 1.95 augustss "packet size\n");
480 1.95 augustss #endif
481 1.95 augustss }
482 1.95 augustss break;
483 1.95 augustss default:
484 1.95 augustss break;
485 1.95 augustss }
486 1.95 augustss }
487 1.1 augustss ifc->endpoints[endpt].refcnt = 0;
488 1.24 augustss p += ed->bLength;
489 1.1 augustss }
490 1.19 augustss #undef ed
491 1.1 augustss LIST_INIT(&ifc->pipes);
492 1.1 augustss return (USBD_NORMAL_COMPLETION);
493 1.24 augustss
494 1.1 augustss bad:
495 1.77 augustss if (ifc->endpoints != NULL) {
496 1.59 augustss free(ifc->endpoints, M_USB);
497 1.77 augustss ifc->endpoints = NULL;
498 1.77 augustss }
499 1.24 augustss return (USBD_INVAL);
500 1.1 augustss }
501 1.1 augustss
502 1.1 augustss void
503 1.78 augustss usbd_free_iface_data(usbd_device_handle dev, int ifcno)
504 1.1 augustss {
505 1.1 augustss usbd_interface_handle ifc = &dev->ifaces[ifcno];
506 1.1 augustss if (ifc->endpoints)
507 1.1 augustss free(ifc->endpoints, M_USB);
508 1.1 augustss }
509 1.1 augustss
510 1.69 augustss Static usbd_status
511 1.78 augustss usbd_set_config(usbd_device_handle dev, int conf)
512 1.7 augustss {
513 1.7 augustss usb_device_request_t req;
514 1.7 augustss
515 1.7 augustss req.bmRequestType = UT_WRITE_DEVICE;
516 1.7 augustss req.bRequest = UR_SET_CONFIG;
517 1.7 augustss USETW(req.wValue, conf);
518 1.7 augustss USETW(req.wIndex, 0);
519 1.7 augustss USETW(req.wLength, 0);
520 1.7 augustss return (usbd_do_request(dev, &req, 0));
521 1.7 augustss }
522 1.7 augustss
523 1.1 augustss usbd_status
524 1.78 augustss usbd_set_config_no(usbd_device_handle dev, int no, int msg)
525 1.1 augustss {
526 1.12 augustss int index;
527 1.12 augustss usb_config_descriptor_t cd;
528 1.53 augustss usbd_status err;
529 1.12 augustss
530 1.75 augustss if (no == USB_UNCONFIG_NO)
531 1.75 augustss return (usbd_set_config_index(dev, USB_UNCONFIG_INDEX, msg));
532 1.75 augustss
533 1.12 augustss DPRINTFN(5,("usbd_set_config_no: %d\n", no));
534 1.12 augustss /* Figure out what config index to use. */
535 1.12 augustss for (index = 0; index < dev->ddesc.bNumConfigurations; index++) {
536 1.53 augustss err = usbd_get_config_desc(dev, index, &cd);
537 1.53 augustss if (err)
538 1.53 augustss return (err);
539 1.12 augustss if (cd.bConfigurationValue == no)
540 1.12 augustss return (usbd_set_config_index(dev, index, msg));
541 1.12 augustss }
542 1.12 augustss return (USBD_INVAL);
543 1.12 augustss }
544 1.12 augustss
545 1.12 augustss usbd_status
546 1.78 augustss usbd_set_config_index(usbd_device_handle dev, int index, int msg)
547 1.12 augustss {
548 1.1 augustss usb_config_descriptor_t cd, *cdp;
549 1.53 augustss usbd_status err;
550 1.103 augustss int i, ifcidx, nifc, len, selfpowered, power;
551 1.1 augustss
552 1.12 augustss DPRINTFN(5,("usbd_set_config_index: dev=%p index=%d\n", dev, index));
553 1.1 augustss
554 1.145 drochner if (index >= dev->ddesc.bNumConfigurations &&
555 1.161 drochner index != USB_UNCONFIG_INDEX) {
556 1.145 drochner /* panic? */
557 1.145 drochner printf("usbd_set_config_index: illegal index\n");
558 1.145 drochner return (USBD_INVAL);
559 1.145 drochner }
560 1.145 drochner
561 1.1 augustss /* XXX check that all interfaces are idle */
562 1.75 augustss if (dev->config != USB_UNCONFIG_NO) {
563 1.12 augustss DPRINTF(("usbd_set_config_index: free old config\n"));
564 1.1 augustss /* Free all configuration data structures. */
565 1.1 augustss nifc = dev->cdesc->bNumInterface;
566 1.12 augustss for (ifcidx = 0; ifcidx < nifc; ifcidx++)
567 1.12 augustss usbd_free_iface_data(dev, ifcidx);
568 1.1 augustss free(dev->ifaces, M_USB);
569 1.1 augustss free(dev->cdesc, M_USB);
570 1.57 augustss dev->ifaces = NULL;
571 1.57 augustss dev->cdesc = NULL;
572 1.75 augustss dev->config = USB_UNCONFIG_NO;
573 1.75 augustss }
574 1.75 augustss
575 1.75 augustss if (index == USB_UNCONFIG_INDEX) {
576 1.75 augustss /* We are unconfiguring the device, so leave unallocated. */
577 1.75 augustss DPRINTF(("usbd_set_config_index: set config 0\n"));
578 1.75 augustss err = usbd_set_config(dev, USB_UNCONFIG_NO);
579 1.136 christos if (err) {
580 1.75 augustss DPRINTF(("usbd_set_config_index: setting config=0 "
581 1.75 augustss "failed, error=%s\n", usbd_errstr(err)));
582 1.136 christos }
583 1.75 augustss return (err);
584 1.1 augustss }
585 1.1 augustss
586 1.74 augustss /* Get the short descriptor. */
587 1.53 augustss err = usbd_get_config_desc(dev, index, &cd);
588 1.53 augustss if (err)
589 1.53 augustss return (err);
590 1.1 augustss len = UGETW(cd.wTotalLength);
591 1.1 augustss cdp = malloc(len, M_USB, M_NOWAIT);
592 1.53 augustss if (cdp == NULL)
593 1.1 augustss return (USBD_NOMEM);
594 1.103 augustss
595 1.103 augustss /* Get the full descriptor. Try a few times for slow devices. */
596 1.103 augustss for (i = 0; i < 3; i++) {
597 1.103 augustss err = usbd_get_desc(dev, UDESC_CONFIG, index, len, cdp);
598 1.103 augustss if (!err)
599 1.103 augustss break;
600 1.103 augustss usbd_delay_ms(dev, 200);
601 1.103 augustss }
602 1.53 augustss if (err)
603 1.1 augustss goto bad;
604 1.103 augustss
605 1.18 augustss if (cdp->bDescriptorType != UDESC_CONFIG) {
606 1.18 augustss DPRINTFN(-1,("usbd_set_config_index: bad desc %d\n",
607 1.18 augustss cdp->bDescriptorType));
608 1.53 augustss err = USBD_INVAL;
609 1.18 augustss goto bad;
610 1.18 augustss }
611 1.74 augustss
612 1.142 drochner /*
613 1.142 drochner * Figure out if the device is self or bus powered.
614 1.142 drochner */
615 1.142 drochner #if 0 /* XXX various devices don't report the power state correctly */
616 1.1 augustss selfpowered = 0;
617 1.141 drochner err = usbd_get_device_status(dev, &ds);
618 1.141 drochner if (!err && (UGETW(ds.wStatus) & UDS_SELF_POWERED))
619 1.141 drochner selfpowered = 1;
620 1.142 drochner #endif
621 1.142 drochner /*
622 1.142 drochner * Use the power state in the configuration we are going
623 1.142 drochner * to set. This doesn't necessarily reflect the actual
624 1.142 drochner * power state of the device; the driver can control this
625 1.142 drochner * by choosing the appropriate configuration.
626 1.142 drochner */
627 1.142 drochner selfpowered = !!(cdp->bmAttributes & UC_SELF_POWERED);
628 1.141 drochner
629 1.81 augustss DPRINTF(("usbd_set_config_index: (addr %d) cno=%d attr=0x%02x, "
630 1.81 augustss "selfpowered=%d, power=%d\n",
631 1.99 augustss cdp->bConfigurationValue, dev->address, cdp->bmAttributes,
632 1.33 augustss selfpowered, cdp->bMaxPower * 2));
633 1.74 augustss
634 1.74 augustss /* Check if we have enough power. */
635 1.142 drochner #if 0 /* this is a no-op, see above */
636 1.141 drochner if ((cdp->bmAttributes & UC_SELF_POWERED) && !selfpowered) {
637 1.141 drochner if (msg)
638 1.141 drochner printf("%s: device addr %d (config %d): "
639 1.141 drochner "can't set self powered configuration\n",
640 1.141 drochner USBDEVNAME(dev->bus->bdev), dev->address,
641 1.141 drochner cdp->bConfigurationValue);
642 1.141 drochner err = USBD_NO_POWER;
643 1.141 drochner goto bad;
644 1.141 drochner }
645 1.142 drochner #endif
646 1.1 augustss #ifdef USB_DEBUG
647 1.53 augustss if (dev->powersrc == NULL) {
648 1.44 augustss DPRINTF(("usbd_set_config_index: No power source?\n"));
649 1.141 drochner err = USBD_IOERROR;
650 1.141 drochner goto bad;
651 1.1 augustss }
652 1.1 augustss #endif
653 1.1 augustss power = cdp->bMaxPower * 2;
654 1.1 augustss if (power > dev->powersrc->power) {
655 1.81 augustss DPRINTF(("power exceeded %d %d\n", power,dev->powersrc->power));
656 1.1 augustss /* XXX print nicer message. */
657 1.7 augustss if (msg)
658 1.18 augustss printf("%s: device addr %d (config %d) exceeds power "
659 1.18 augustss "budget, %d mA > %d mA\n",
660 1.151 drochner device_xname(dev->bus->usbctl), dev->address,
661 1.99 augustss cdp->bConfigurationValue,
662 1.7 augustss power, dev->powersrc->power);
663 1.53 augustss err = USBD_NO_POWER;
664 1.1 augustss goto bad;
665 1.1 augustss }
666 1.1 augustss dev->power = power;
667 1.1 augustss dev->self_powered = selfpowered;
668 1.1 augustss
669 1.74 augustss /* Set the actual configuration value. */
670 1.18 augustss DPRINTF(("usbd_set_config_index: set config %d\n",
671 1.18 augustss cdp->bConfigurationValue));
672 1.53 augustss err = usbd_set_config(dev, cdp->bConfigurationValue);
673 1.53 augustss if (err) {
674 1.14 drochner DPRINTF(("usbd_set_config_index: setting config=%d failed, "
675 1.39 augustss "error=%s\n",
676 1.53 augustss cdp->bConfigurationValue, usbd_errstr(err)));
677 1.1 augustss goto bad;
678 1.1 augustss }
679 1.74 augustss
680 1.74 augustss /* Allocate and fill interface data. */
681 1.1 augustss nifc = cdp->bNumInterface;
682 1.99 augustss dev->ifaces = malloc(nifc * sizeof(struct usbd_interface),
683 1.1 augustss M_USB, M_NOWAIT);
684 1.58 augustss if (dev->ifaces == NULL) {
685 1.53 augustss err = USBD_NOMEM;
686 1.1 augustss goto bad;
687 1.1 augustss }
688 1.12 augustss DPRINTFN(5,("usbd_set_config_index: dev=%p cdesc=%p\n", dev, cdp));
689 1.1 augustss dev->cdesc = cdp;
690 1.1 augustss dev->config = cdp->bConfigurationValue;
691 1.12 augustss for (ifcidx = 0; ifcidx < nifc; ifcidx++) {
692 1.53 augustss err = usbd_fill_iface_data(dev, ifcidx, 0);
693 1.53 augustss if (err) {
694 1.12 augustss while (--ifcidx >= 0)
695 1.12 augustss usbd_free_iface_data(dev, ifcidx);
696 1.1 augustss goto bad;
697 1.1 augustss }
698 1.1 augustss }
699 1.1 augustss
700 1.1 augustss return (USBD_NORMAL_COMPLETION);
701 1.1 augustss
702 1.1 augustss bad:
703 1.1 augustss free(cdp, M_USB);
704 1.53 augustss return (err);
705 1.1 augustss }
706 1.1 augustss
707 1.1 augustss /* XXX add function for alternate settings */
708 1.1 augustss
709 1.1 augustss usbd_status
710 1.78 augustss usbd_setup_pipe(usbd_device_handle dev, usbd_interface_handle iface,
711 1.78 augustss struct usbd_endpoint *ep, int ival, usbd_pipe_handle *pipe)
712 1.1 augustss {
713 1.1 augustss usbd_pipe_handle p;
714 1.53 augustss usbd_status err;
715 1.1 augustss
716 1.1 augustss DPRINTFN(1,("usbd_setup_pipe: dev=%p iface=%p ep=%p pipe=%p\n",
717 1.1 augustss dev, iface, ep, pipe));
718 1.1 augustss p = malloc(dev->bus->pipe_size, M_USB, M_NOWAIT);
719 1.53 augustss if (p == NULL)
720 1.1 augustss return (USBD_NOMEM);
721 1.1 augustss p->device = dev;
722 1.1 augustss p->iface = iface;
723 1.1 augustss p->endpoint = ep;
724 1.1 augustss ep->refcnt++;
725 1.1 augustss p->refcnt = 1;
726 1.53 augustss p->intrxfer = 0;
727 1.1 augustss p->running = 0;
728 1.70 augustss p->aborting = 0;
729 1.34 augustss p->repeat = 0;
730 1.63 augustss p->interval = ival;
731 1.1 augustss SIMPLEQ_INIT(&p->queue);
732 1.53 augustss err = dev->bus->methods->open_pipe(p);
733 1.53 augustss if (err) {
734 1.39 augustss DPRINTFN(-1,("usbd_setup_pipe: endpoint=0x%x failed, error="
735 1.39 augustss "%s\n",
736 1.53 augustss ep->edesc->bEndpointAddress, usbd_errstr(err)));
737 1.1 augustss free(p, M_USB);
738 1.53 augustss return (err);
739 1.1 augustss }
740 1.1 augustss *pipe = p;
741 1.1 augustss return (USBD_NORMAL_COMPLETION);
742 1.1 augustss }
743 1.1 augustss
744 1.1 augustss /* Abort the device control pipe. */
745 1.1 augustss void
746 1.78 augustss usbd_kill_pipe(usbd_pipe_handle pipe)
747 1.1 augustss {
748 1.89 augustss usbd_abort_pipe(pipe);
749 1.1 augustss pipe->methods->close(pipe);
750 1.1 augustss pipe->endpoint->refcnt--;
751 1.1 augustss free(pipe, M_USB);
752 1.1 augustss }
753 1.1 augustss
754 1.1 augustss int
755 1.78 augustss usbd_getnewaddr(usbd_bus_handle bus)
756 1.1 augustss {
757 1.18 augustss int addr;
758 1.1 augustss
759 1.18 augustss for (addr = 1; addr < USB_MAX_DEVICES; addr++)
760 1.18 augustss if (bus->devices[addr] == 0)
761 1.18 augustss return (addr);
762 1.1 augustss return (-1);
763 1.1 augustss }
764 1.1 augustss
765 1.155 drochner usbd_status
766 1.155 drochner usbd_attach_roothub(device_t parent, usbd_device_handle dev)
767 1.155 drochner {
768 1.155 drochner struct usb_attach_arg uaa;
769 1.155 drochner usb_device_descriptor_t *dd = &dev->ddesc;
770 1.155 drochner device_t dv;
771 1.155 drochner
772 1.155 drochner uaa.device = dev;
773 1.155 drochner uaa.usegeneric = 0;
774 1.155 drochner uaa.port = 0;
775 1.155 drochner uaa.vendor = UGETW(dd->idVendor);
776 1.155 drochner uaa.product = UGETW(dd->idProduct);
777 1.155 drochner uaa.release = UGETW(dd->bcdDevice);
778 1.155 drochner uaa.class = dd->bDeviceClass;
779 1.155 drochner uaa.subclass = dd->bDeviceSubClass;
780 1.155 drochner uaa.proto = dd->bDeviceProtocol;
781 1.155 drochner
782 1.156 drochner dv = config_found_ia(parent, "usbroothubif", &uaa, 0);
783 1.155 drochner if (dv) {
784 1.155 drochner dev->subdevs = malloc(sizeof dv, M_USB, M_NOWAIT);
785 1.155 drochner if (dev->subdevs == NULL)
786 1.155 drochner return (USBD_NOMEM);
787 1.155 drochner dev->subdevs[0] = dv;
788 1.155 drochner dev->subdevlen = 1;
789 1.155 drochner }
790 1.155 drochner return (USBD_NORMAL_COMPLETION);
791 1.155 drochner }
792 1.18 augustss
793 1.160 drochner static usbd_status
794 1.160 drochner usbd_attachwholedevice(device_t parent, usbd_device_handle dev, int port,
795 1.160 drochner int usegeneric)
796 1.18 augustss {
797 1.18 augustss struct usb_attach_arg uaa;
798 1.18 augustss usb_device_descriptor_t *dd = &dev->ddesc;
799 1.160 drochner device_t dv;
800 1.158 drochner int dlocs[USBDEVIFCF_NLOCS];
801 1.18 augustss
802 1.18 augustss uaa.device = dev;
803 1.160 drochner uaa.usegeneric = usegeneric;
804 1.18 augustss uaa.port = port;
805 1.32 augustss uaa.vendor = UGETW(dd->idVendor);
806 1.32 augustss uaa.product = UGETW(dd->idProduct);
807 1.32 augustss uaa.release = UGETW(dd->bcdDevice);
808 1.144 drochner uaa.class = dd->bDeviceClass;
809 1.144 drochner uaa.subclass = dd->bDeviceSubClass;
810 1.144 drochner uaa.proto = dd->bDeviceProtocol;
811 1.18 augustss
812 1.158 drochner dlocs[USBDEVIFCF_PORT] = uaa.port;
813 1.158 drochner dlocs[USBDEVIFCF_VENDOR] = uaa.vendor;
814 1.158 drochner dlocs[USBDEVIFCF_PRODUCT] = uaa.product;
815 1.158 drochner dlocs[USBDEVIFCF_RELEASE] = uaa.release;
816 1.158 drochner /* the rest is historical ballast */
817 1.158 drochner dlocs[USBDEVIFCF_CONFIGURATION] = -1;
818 1.158 drochner dlocs[USBDEVIFCF_INTERFACE] = -1;
819 1.158 drochner
820 1.158 drochner dv = config_found_sm_loc(parent, "usbdevif", dlocs, &uaa, usbd_print,
821 1.160 drochner config_stdsubmatch);
822 1.34 augustss if (dv) {
823 1.155 drochner dev->subdevs = malloc(sizeof dv, M_USB, M_NOWAIT);
824 1.57 augustss if (dev->subdevs == NULL)
825 1.34 augustss return (USBD_NOMEM);
826 1.34 augustss dev->subdevs[0] = dv;
827 1.155 drochner dev->subdevlen = 1;
828 1.160 drochner dev->nifaces_claimed = 1; /* XXX */
829 1.34 augustss }
830 1.160 drochner return (USBD_NORMAL_COMPLETION);
831 1.160 drochner }
832 1.18 augustss
833 1.160 drochner static usbd_status
834 1.162 kent usbd_attachinterfaces(device_t parent, usbd_device_handle dev,
835 1.162 kent int port, const int *locators)
836 1.160 drochner {
837 1.160 drochner struct usbif_attach_arg uiaa;
838 1.162 kent int ilocs[USBIFIFCF_NLOCS];
839 1.160 drochner usb_device_descriptor_t *dd = &dev->ddesc;
840 1.160 drochner int nifaces;
841 1.160 drochner usbd_interface_handle *ifaces;
842 1.162 kent int i, j, loc;
843 1.160 drochner device_t dv;
844 1.160 drochner
845 1.160 drochner nifaces = dev->cdesc->bNumInterface;
846 1.160 drochner ifaces = malloc(nifaces * sizeof(*ifaces), M_USB, M_NOWAIT|M_ZERO);
847 1.160 drochner if (!ifaces)
848 1.160 drochner return (USBD_NOMEM);
849 1.160 drochner for (i = 0; i < nifaces; i++)
850 1.160 drochner if (!dev->subdevs[i])
851 1.160 drochner ifaces[i] = &dev->ifaces[i];
852 1.18 augustss
853 1.144 drochner uiaa.device = dev;
854 1.144 drochner uiaa.port = port;
855 1.144 drochner uiaa.vendor = UGETW(dd->idVendor);
856 1.144 drochner uiaa.product = UGETW(dd->idProduct);
857 1.144 drochner uiaa.release = UGETW(dd->bcdDevice);
858 1.160 drochner uiaa.configno = dev->cdesc->bConfigurationValue;
859 1.160 drochner uiaa.ifaces = ifaces;
860 1.160 drochner uiaa.nifaces = nifaces;
861 1.158 drochner ilocs[USBIFIFCF_PORT] = uiaa.port;
862 1.158 drochner ilocs[USBIFIFCF_VENDOR] = uiaa.vendor;
863 1.158 drochner ilocs[USBIFIFCF_PRODUCT] = uiaa.product;
864 1.158 drochner ilocs[USBIFIFCF_RELEASE] = uiaa.release;
865 1.160 drochner ilocs[USBIFIFCF_CONFIGURATION] = uiaa.configno;
866 1.160 drochner
867 1.160 drochner for (i = 0; i < nifaces; i++) {
868 1.160 drochner if (!ifaces[i])
869 1.160 drochner continue; /* interface already claimed */
870 1.160 drochner uiaa.iface = ifaces[i];
871 1.160 drochner uiaa.class = ifaces[i]->idesc->bInterfaceClass;
872 1.160 drochner uiaa.subclass = ifaces[i]->idesc->bInterfaceSubClass;
873 1.160 drochner uiaa.proto = ifaces[i]->idesc->bInterfaceProtocol;
874 1.160 drochner uiaa.ifaceno = ifaces[i]->idesc->bInterfaceNumber;
875 1.160 drochner ilocs[USBIFIFCF_INTERFACE] = uiaa.ifaceno;
876 1.162 kent if (locators != NULL) {
877 1.162 kent loc = locators[USBIFIFCF_CONFIGURATION];
878 1.162 kent if (loc != USBIFIFCF_CONFIGURATION_DEFAULT &&
879 1.162 kent loc != uiaa.configno)
880 1.162 kent continue;
881 1.162 kent loc = locators[USBIFIFCF_INTERFACE];
882 1.162 kent if (loc != USBIFIFCF_INTERFACE && loc != uiaa.ifaceno)
883 1.162 kent continue;
884 1.162 kent }
885 1.160 drochner dv = config_found_sm_loc(parent, "usbifif", ilocs, &uiaa,
886 1.160 drochner usbd_ifprint, config_stdsubmatch);
887 1.160 drochner if (!dv)
888 1.160 drochner continue;
889 1.160 drochner ifaces[i] = 0; /* claim */
890 1.160 drochner /* account for ifaces claimed by the driver behind our back */
891 1.160 drochner for (j = 0; j < nifaces; j++) {
892 1.160 drochner if (!ifaces[j] && !dev->subdevs[j]) {
893 1.160 drochner dev->subdevs[j] = dv;
894 1.160 drochner dev->nifaces_claimed++;
895 1.160 drochner }
896 1.160 drochner }
897 1.160 drochner }
898 1.160 drochner
899 1.160 drochner free(ifaces, M_USB);
900 1.160 drochner return (USBD_NORMAL_COMPLETION);
901 1.160 drochner }
902 1.160 drochner
903 1.160 drochner usbd_status
904 1.160 drochner usbd_probe_and_attach(device_ptr_t parent, usbd_device_handle dev,
905 1.160 drochner int port, int addr)
906 1.160 drochner {
907 1.160 drochner usb_device_descriptor_t *dd = &dev->ddesc;
908 1.160 drochner int confi, nifaces;
909 1.160 drochner usbd_status err;
910 1.160 drochner
911 1.160 drochner /* First try with device specific drivers. */
912 1.160 drochner DPRINTF(("usbd_probe_and_attach: trying device specific drivers\n"));
913 1.160 drochner err = usbd_attachwholedevice(parent, dev, port, 0);
914 1.160 drochner if (dev->nifaces_claimed || err)
915 1.160 drochner return (err);
916 1.160 drochner DPRINTF(("usbd_probe_and_attach: no device specific driver found\n"));
917 1.158 drochner
918 1.60 augustss DPRINTF(("usbd_probe_and_attach: looping over %d configurations\n",
919 1.60 augustss dd->bNumConfigurations));
920 1.18 augustss for (confi = 0; confi < dd->bNumConfigurations; confi++) {
921 1.18 augustss DPRINTFN(1,("usbd_probe_and_attach: trying config idx=%d\n",
922 1.18 augustss confi));
923 1.53 augustss err = usbd_set_config_index(dev, confi, 1);
924 1.53 augustss if (err) {
925 1.18 augustss #ifdef USB_DEBUG
926 1.18 augustss DPRINTF(("%s: port %d, set config at addr %d failed, "
927 1.43 augustss "error=%s\n", USBDEVPTRNAME(parent), port,
928 1.53 augustss addr, usbd_errstr(err)));
929 1.18 augustss #else
930 1.18 augustss printf("%s: port %d, set config at addr %d failed\n",
931 1.43 augustss USBDEVPTRNAME(parent), port, addr);
932 1.18 augustss #endif
933 1.162 kent return (err);
934 1.18 augustss }
935 1.20 augustss nifaces = dev->cdesc->bNumInterface;
936 1.160 drochner dev->subdevs = malloc(nifaces * sizeof(device_t), M_USB,
937 1.155 drochner M_NOWAIT|M_ZERO);
938 1.160 drochner if (dev->subdevs == NULL)
939 1.34 augustss return (USBD_NOMEM);
940 1.155 drochner dev->subdevlen = nifaces;
941 1.52 augustss
942 1.162 kent err = usbd_attachinterfaces(parent, dev, port, NULL);
943 1.160 drochner
944 1.160 drochner if (!dev->nifaces_claimed) {
945 1.160 drochner free(dev->subdevs, M_USB);
946 1.160 drochner dev->subdevs = 0;
947 1.160 drochner dev->subdevlen = 0;
948 1.18 augustss }
949 1.160 drochner if (dev->nifaces_claimed || err)
950 1.160 drochner return (err);
951 1.18 augustss }
952 1.21 augustss /* No interfaces were attached in any of the configurations. */
953 1.34 augustss
954 1.34 augustss if (dd->bNumConfigurations > 1) /* don't change if only 1 config */
955 1.18 augustss usbd_set_config_index(dev, 0, 0);
956 1.18 augustss
957 1.18 augustss DPRINTF(("usbd_probe_and_attach: no interface drivers found\n"));
958 1.18 augustss
959 1.18 augustss /* Finally try the generic driver. */
960 1.160 drochner err = usbd_attachwholedevice(parent, dev, port, 1);
961 1.18 augustss
962 1.99 augustss /*
963 1.18 augustss * The generic attach failed, but leave the device as it is.
964 1.18 augustss * We just did not find any drivers, that's all. The device is
965 1.18 augustss * fully operational and not harming anyone.
966 1.18 augustss */
967 1.18 augustss DPRINTF(("usbd_probe_and_attach: generic attach failed\n"));
968 1.162 kent return (USBD_NORMAL_COMPLETION);
969 1.18 augustss }
970 1.18 augustss
971 1.162 kent /**
972 1.162 kent * Called from uhub_rescan(). usbd_new_device() for the target dev must be
973 1.162 kent * called before calling this.
974 1.162 kent */
975 1.162 kent usbd_status
976 1.162 kent usbd_reattach_device(device_ptr_t parent, usbd_device_handle dev,
977 1.162 kent int port, const int *locators)
978 1.162 kent {
979 1.162 kent int i, loc;
980 1.162 kent
981 1.162 kent if (locators != NULL) {
982 1.162 kent loc = locators[USBIFIFCF_PORT];
983 1.162 kent if (loc != USBIFIFCF_PORT_DEFAULT && loc != port)
984 1.162 kent return USBD_NORMAL_COMPLETION;
985 1.162 kent loc = locators[USBIFIFCF_VENDOR];
986 1.162 kent if (loc != USBIFIFCF_VENDOR_DEFAULT &&
987 1.162 kent loc != UGETW(dev->ddesc.idVendor))
988 1.162 kent return USBD_NORMAL_COMPLETION;
989 1.162 kent loc = locators[USBIFIFCF_PRODUCT];
990 1.162 kent if (loc != USBIFIFCF_PRODUCT_DEFAULT &&
991 1.162 kent loc != UGETW(dev->ddesc.idProduct))
992 1.162 kent return USBD_NORMAL_COMPLETION;
993 1.162 kent loc = locators[USBIFIFCF_RELEASE];
994 1.162 kent if (loc != USBIFIFCF_RELEASE_DEFAULT &&
995 1.162 kent loc != UGETW(dev->ddesc.bcdDevice))
996 1.162 kent return USBD_NORMAL_COMPLETION;
997 1.162 kent }
998 1.162 kent if (dev->subdevlen == 0) {
999 1.162 kent /* XXX: check USBIFIFCF_CONFIGURATION and
1000 1.162 kent * USBIFIFCF_INTERFACE too */
1001 1.162 kent return usbd_probe_and_attach(parent, dev, port, dev->address);
1002 1.162 kent } else if (dev->subdevlen != dev->cdesc->bNumInterface) {
1003 1.162 kent /* device-specific or generic driver is already attached. */
1004 1.162 kent return USBD_NORMAL_COMPLETION;
1005 1.162 kent }
1006 1.162 kent /* Does the device have unconfigured interfaces? */
1007 1.162 kent for (i = 0; i < dev->subdevlen; i++) {
1008 1.162 kent if (dev->subdevs[i] == NULL) {
1009 1.162 kent break;
1010 1.162 kent }
1011 1.162 kent }
1012 1.162 kent if (i >= dev->subdevlen)
1013 1.162 kent return USBD_NORMAL_COMPLETION;
1014 1.162 kent return usbd_attachinterfaces(parent, dev, port, locators);
1015 1.162 kent }
1016 1.18 augustss
1017 1.1 augustss /*
1018 1.162.12.1 matt * Get the first 8 bytes of the device descriptor.
1019 1.162.12.1 matt * Do as Windows does: try to read 64 bytes -- there are devices which
1020 1.162.12.1 matt * recognize the initial descriptor fetch (before the control endpoint's
1021 1.162.12.1 matt * MaxPacketSize is known by the host) by exactly this length.
1022 1.162.12.1 matt */
1023 1.162.12.1 matt usbd_status
1024 1.162.12.1 matt usbd_get_initial_ddesc(usbd_device_handle dev, usb_device_descriptor_t *desc)
1025 1.162.12.1 matt {
1026 1.162.12.1 matt usb_device_request_t req;
1027 1.162.12.1 matt char buf[64];
1028 1.162.12.1 matt int res, actlen;
1029 1.162.12.1 matt
1030 1.162.12.1 matt req.bmRequestType = UT_READ_DEVICE;
1031 1.162.12.1 matt req.bRequest = UR_GET_DESCRIPTOR;
1032 1.162.12.1 matt USETW2(req.wValue, UDESC_DEVICE, 0);
1033 1.162.12.1 matt USETW(req.wIndex, 0);
1034 1.162.12.1 matt USETW(req.wLength, 64);
1035 1.162.12.1 matt res = usbd_do_request_flags(dev, &req, buf, USBD_SHORT_XFER_OK,
1036 1.162.12.1 matt &actlen, USBD_DEFAULT_TIMEOUT);
1037 1.162.12.1 matt if (res)
1038 1.162.12.1 matt return res;
1039 1.162.12.1 matt if (actlen < 8)
1040 1.162.12.1 matt return USBD_SHORT_XFER;
1041 1.162.12.1 matt memcpy(desc, buf, 8);
1042 1.162.12.1 matt return USBD_NORMAL_COMPLETION;
1043 1.162.12.1 matt }
1044 1.162.12.1 matt
1045 1.162.12.1 matt /*
1046 1.1 augustss * Called when a new device has been put in the powered state,
1047 1.1 augustss * but not yet in the addressed state.
1048 1.1 augustss * Get initial descriptor, set the address, get full descriptor,
1049 1.1 augustss * and attach a driver.
1050 1.1 augustss */
1051 1.1 augustss usbd_status
1052 1.78 augustss usbd_new_device(device_ptr_t parent, usbd_bus_handle bus, int depth,
1053 1.94 augustss int speed, int port, struct usbd_port *up)
1054 1.1 augustss {
1055 1.120 augustss usbd_device_handle dev, adev;
1056 1.94 augustss struct usbd_device *hub;
1057 1.18 augustss usb_device_descriptor_t *dd;
1058 1.107 augustss usb_port_status_t ps;
1059 1.53 augustss usbd_status err;
1060 1.1 augustss int addr;
1061 1.18 augustss int i;
1062 1.120 augustss int p;
1063 1.1 augustss
1064 1.94 augustss DPRINTF(("usbd_new_device bus=%p port=%d depth=%d speed=%d\n",
1065 1.94 augustss bus, port, depth, speed));
1066 1.162.12.1 matt
1067 1.162.12.1 matt if (bus->methods->new_device != NULL)
1068 1.162.12.1 matt return (bus->methods->new_device)(parent, bus, depth, speed,
1069 1.162.12.1 matt port, up);
1070 1.162.12.1 matt
1071 1.1 augustss addr = usbd_getnewaddr(bus);
1072 1.1 augustss if (addr < 0) {
1073 1.99 augustss printf("%s: No free USB addresses, new device ignored.\n",
1074 1.151 drochner device_xname(bus->usbctl));
1075 1.1 augustss return (USBD_NO_ADDR);
1076 1.1 augustss }
1077 1.1 augustss
1078 1.97 tsutsui dev = malloc(sizeof *dev, M_USB, M_NOWAIT|M_ZERO);
1079 1.53 augustss if (dev == NULL)
1080 1.1 augustss return (USBD_NOMEM);
1081 1.1 augustss
1082 1.1 augustss dev->bus = bus;
1083 1.1 augustss
1084 1.1 augustss /* Set up default endpoint handle. */
1085 1.1 augustss dev->def_ep.edesc = &dev->def_ep_desc;
1086 1.1 augustss
1087 1.1 augustss /* Set up default endpoint descriptor. */
1088 1.1 augustss dev->def_ep_desc.bLength = USB_ENDPOINT_DESCRIPTOR_SIZE;
1089 1.1 augustss dev->def_ep_desc.bDescriptorType = UDESC_ENDPOINT;
1090 1.1 augustss dev->def_ep_desc.bEndpointAddress = USB_CONTROL_ENDPOINT;
1091 1.1 augustss dev->def_ep_desc.bmAttributes = UE_CONTROL;
1092 1.1 augustss USETW(dev->def_ep_desc.wMaxPacketSize, USB_MAX_IPACKET);
1093 1.1 augustss dev->def_ep_desc.bInterval = 0;
1094 1.1 augustss
1095 1.1 augustss dev->quirks = &usbd_no_quirk;
1096 1.1 augustss dev->address = USB_START_ADDR;
1097 1.4 augustss dev->ddesc.bMaxPacketSize = 0;
1098 1.1 augustss dev->depth = depth;
1099 1.1 augustss dev->powersrc = up;
1100 1.94 augustss dev->myhub = up->parent;
1101 1.120 augustss
1102 1.120 augustss up->device = dev;
1103 1.120 augustss
1104 1.120 augustss /* Locate port on upstream high speed hub */
1105 1.120 augustss for (adev = dev, hub = up->parent;
1106 1.94 augustss hub != NULL && hub->speed != USB_SPEED_HIGH;
1107 1.120 augustss adev = hub, hub = hub->myhub)
1108 1.94 augustss ;
1109 1.120 augustss if (hub) {
1110 1.120 augustss for (p = 0; p < hub->hub->hubdesc.bNbrPorts; p++) {
1111 1.120 augustss if (hub->hub->ports[p].device == adev) {
1112 1.120 augustss dev->myhsport = &hub->hub->ports[p];
1113 1.120 augustss goto found;
1114 1.120 augustss }
1115 1.120 augustss }
1116 1.120 augustss panic("usbd_new_device: cannot find HS port\n");
1117 1.120 augustss found:
1118 1.120 augustss DPRINTFN(1,("usbd_new_device: high speed port %d\n", p));
1119 1.120 augustss } else {
1120 1.120 augustss dev->myhsport = NULL;
1121 1.120 augustss }
1122 1.94 augustss dev->speed = speed;
1123 1.22 augustss dev->langid = USBD_NOLANG;
1124 1.50 augustss dev->cookie.cookie = ++usb_cookie_no;
1125 1.1 augustss
1126 1.67 soren /* Establish the default pipe. */
1127 1.63 augustss err = usbd_setup_pipe(dev, 0, &dev->def_ep, USBD_DEFAULT_INTERVAL,
1128 1.63 augustss &dev->default_pipe);
1129 1.53 augustss if (err) {
1130 1.18 augustss usbd_remove_device(dev, up);
1131 1.53 augustss return (err);
1132 1.18 augustss }
1133 1.1 augustss
1134 1.18 augustss dd = &dev->ddesc;
1135 1.6 augustss /* Try a few times in case the device is slow (i.e. outside specs.) */
1136 1.107 augustss for (i = 0; i < 10; i++) {
1137 1.6 augustss /* Get the first 8 bytes of the device descriptor. */
1138 1.53 augustss err = usbd_get_desc(dev, UDESC_DEVICE, 0, USB_MAX_IPACKET, dd);
1139 1.53 augustss if (!err)
1140 1.6 augustss break;
1141 1.23 augustss usbd_delay_ms(dev, 200);
1142 1.107 augustss if ((i & 3) == 3)
1143 1.107 augustss usbd_reset_port(up->parent, port, &ps);
1144 1.6 augustss }
1145 1.53 augustss if (err) {
1146 1.14 drochner DPRINTFN(-1, ("usbd_new_device: addr=%d, getting first desc "
1147 1.53 augustss "failed\n", addr));
1148 1.18 augustss usbd_remove_device(dev, up);
1149 1.53 augustss return (err);
1150 1.95 augustss }
1151 1.95 augustss
1152 1.95 augustss if (speed == USB_SPEED_HIGH) {
1153 1.95 augustss /* Max packet size must be 64 (sec 5.5.3). */
1154 1.95 augustss if (dd->bMaxPacketSize != USB_2_MAX_CTRL_PACKET) {
1155 1.95 augustss #ifdef DIAGNOSTIC
1156 1.95 augustss printf("usbd_new_device: addr=%d bad max packet size\n",
1157 1.95 augustss addr);
1158 1.95 augustss #endif
1159 1.95 augustss dd->bMaxPacketSize = USB_2_MAX_CTRL_PACKET;
1160 1.95 augustss }
1161 1.18 augustss }
1162 1.18 augustss
1163 1.39 augustss DPRINTF(("usbd_new_device: adding unit addr=%d, rev=%02x, class=%d, "
1164 1.99 augustss "subclass=%d, protocol=%d, maxpacket=%d, len=%d, speed=%d\n",
1165 1.39 augustss addr,UGETW(dd->bcdUSB), dd->bDeviceClass, dd->bDeviceSubClass,
1166 1.99 augustss dd->bDeviceProtocol, dd->bMaxPacketSize, dd->bLength,
1167 1.94 augustss dev->speed));
1168 1.39 augustss
1169 1.18 augustss if (dd->bDescriptorType != UDESC_DEVICE) {
1170 1.18 augustss /* Illegal device descriptor */
1171 1.18 augustss DPRINTFN(-1,("usbd_new_device: illegal descriptor %d\n",
1172 1.18 augustss dd->bDescriptorType));
1173 1.18 augustss usbd_remove_device(dev, up);
1174 1.18 augustss return (USBD_INVAL);
1175 1.1 augustss }
1176 1.1 augustss
1177 1.39 augustss if (dd->bLength < USB_DEVICE_DESCRIPTOR_SIZE) {
1178 1.39 augustss DPRINTFN(-1,("usbd_new_device: bad length %d\n", dd->bLength));
1179 1.39 augustss usbd_remove_device(dev, up);
1180 1.39 augustss return (USBD_INVAL);
1181 1.39 augustss }
1182 1.4 augustss
1183 1.18 augustss USETW(dev->def_ep_desc.wMaxPacketSize, dd->bMaxPacketSize);
1184 1.1 augustss
1185 1.62 augustss err = usbd_reload_device_desc(dev);
1186 1.53 augustss if (err) {
1187 1.14 drochner DPRINTFN(-1, ("usbd_new_device: addr=%d, getting full desc "
1188 1.14 drochner "failed\n", addr));
1189 1.18 augustss usbd_remove_device(dev, up);
1190 1.53 augustss return (err);
1191 1.1 augustss }
1192 1.1 augustss
1193 1.159 jmcneill /* Set the address */
1194 1.159 jmcneill DPRINTFN(5, ("usbd_new_device: setting device address=%d\n", addr));
1195 1.159 jmcneill err = usbd_set_address(dev, addr);
1196 1.159 jmcneill if (err) {
1197 1.159 jmcneill DPRINTFN(-1, ("usbd_new_device: set address %d failed\n", addr));
1198 1.159 jmcneill err = USBD_SET_ADDR_FAILED;
1199 1.159 jmcneill usbd_remove_device(dev, up);
1200 1.159 jmcneill return err;
1201 1.159 jmcneill }
1202 1.159 jmcneill
1203 1.159 jmcneill /* Allow device time to set new address */
1204 1.159 jmcneill usbd_delay_ms(dev, USB_SET_ADDRESS_SETTLE);
1205 1.159 jmcneill dev->address = addr; /* new device address now */
1206 1.159 jmcneill bus->devices[addr] = dev;
1207 1.159 jmcneill
1208 1.159 jmcneill /* Re-establish the default pipe with the new address. */
1209 1.159 jmcneill usbd_kill_pipe(dev->default_pipe);
1210 1.159 jmcneill err = usbd_setup_pipe(dev, 0, &dev->def_ep, USBD_DEFAULT_INTERVAL,
1211 1.159 jmcneill &dev->default_pipe);
1212 1.159 jmcneill if (err) {
1213 1.159 jmcneill DPRINTFN(-1, ("usbd_new_device: setup default pipe failed\n"));
1214 1.159 jmcneill usbd_remove_device(dev, up);
1215 1.159 jmcneill return err;
1216 1.159 jmcneill }
1217 1.159 jmcneill
1218 1.1 augustss /* Assume 100mA bus powered for now. Changed when configured. */
1219 1.1 augustss dev->power = USB_MIN_POWER;
1220 1.1 augustss dev->self_powered = 0;
1221 1.1 augustss
1222 1.99 augustss DPRINTF(("usbd_new_device: new dev (addr %d), dev=%p, parent=%p\n",
1223 1.1 augustss addr, dev, parent));
1224 1.99 augustss
1225 1.65 augustss usbd_add_dev_event(USB_EVENT_DEVICE_ATTACH, dev);
1226 1.1 augustss
1227 1.155 drochner if (port == 0) { /* root hub */
1228 1.155 drochner KASSERT(addr == 1);
1229 1.155 drochner usbd_attach_roothub(parent, dev);
1230 1.155 drochner return (USBD_NORMAL_COMPLETION);
1231 1.155 drochner }
1232 1.155 drochner
1233 1.53 augustss err = usbd_probe_and_attach(parent, dev, port, addr);
1234 1.53 augustss if (err) {
1235 1.18 augustss usbd_remove_device(dev, up);
1236 1.53 augustss return (err);
1237 1.18 augustss }
1238 1.65 augustss
1239 1.18 augustss return (USBD_NORMAL_COMPLETION);
1240 1.62 augustss }
1241 1.62 augustss
1242 1.62 augustss usbd_status
1243 1.78 augustss usbd_reload_device_desc(usbd_device_handle dev)
1244 1.62 augustss {
1245 1.62 augustss usbd_status err;
1246 1.62 augustss
1247 1.62 augustss /* Get the full device descriptor. */
1248 1.62 augustss err = usbd_get_device_desc(dev, &dev->ddesc);
1249 1.62 augustss if (err)
1250 1.62 augustss return (err);
1251 1.62 augustss
1252 1.62 augustss /* Figure out what's wrong with this device. */
1253 1.62 augustss dev->quirks = usbd_find_quirk(&dev->ddesc);
1254 1.62 augustss
1255 1.62 augustss return (USBD_NORMAL_COMPLETION);
1256 1.18 augustss }
1257 1.1 augustss
1258 1.18 augustss void
1259 1.78 augustss usbd_remove_device(usbd_device_handle dev, struct usbd_port *up)
1260 1.18 augustss {
1261 1.18 augustss DPRINTF(("usbd_remove_device: %p\n", dev));
1262 1.99 augustss
1263 1.53 augustss if (dev->default_pipe != NULL)
1264 1.18 augustss usbd_kill_pipe(dev->default_pipe);
1265 1.120 augustss up->device = NULL;
1266 1.120 augustss dev->bus->devices[dev->address] = NULL;
1267 1.1 augustss
1268 1.1 augustss free(dev, M_USB);
1269 1.1 augustss }
1270 1.1 augustss
1271 1.1 augustss int
1272 1.78 augustss usbd_print(void *aux, const char *pnp)
1273 1.1 augustss {
1274 1.1 augustss struct usb_attach_arg *uaa = aux;
1275 1.1 augustss
1276 1.1 augustss DPRINTFN(15, ("usbd_print dev=%p\n", uaa->device));
1277 1.1 augustss if (pnp) {
1278 1.134 christos #define USB_DEVINFO 1024
1279 1.134 christos char *devinfo;
1280 1.1 augustss if (!uaa->usegeneric)
1281 1.1 augustss return (QUIET);
1282 1.134 christos devinfo = malloc(USB_DEVINFO, M_TEMP, M_WAITOK);
1283 1.134 christos usbd_devinfo(uaa->device, 1, devinfo, USB_DEVINFO);
1284 1.101 thorpej aprint_normal("%s, %s", devinfo, pnp);
1285 1.134 christos free(devinfo, M_TEMP);
1286 1.1 augustss }
1287 1.155 drochner aprint_normal(" port %d", uaa->port);
1288 1.144 drochner #if 0
1289 1.144 drochner /*
1290 1.144 drochner * It gets very crowded with these locators on the attach line.
1291 1.144 drochner * They are not really needed since they are printed in the clear
1292 1.144 drochner * by each driver.
1293 1.144 drochner */
1294 1.144 drochner if (uaa->vendor != UHUB_UNK_VENDOR)
1295 1.144 drochner aprint_normal(" vendor 0x%04x", uaa->vendor);
1296 1.144 drochner if (uaa->product != UHUB_UNK_PRODUCT)
1297 1.144 drochner aprint_normal(" product 0x%04x", uaa->product);
1298 1.144 drochner if (uaa->release != UHUB_UNK_RELEASE)
1299 1.144 drochner aprint_normal(" release 0x%04x", uaa->release);
1300 1.144 drochner #endif
1301 1.144 drochner return (UNCONF);
1302 1.144 drochner }
1303 1.144 drochner
1304 1.144 drochner int
1305 1.144 drochner usbd_ifprint(void *aux, const char *pnp)
1306 1.144 drochner {
1307 1.144 drochner struct usbif_attach_arg *uaa = aux;
1308 1.144 drochner
1309 1.144 drochner DPRINTFN(15, ("usbd_print dev=%p\n", uaa->device));
1310 1.144 drochner if (pnp)
1311 1.144 drochner return (QUIET);
1312 1.155 drochner aprint_normal(" port %d", uaa->port);
1313 1.156 drochner aprint_normal(" configuration %d", uaa->configno);
1314 1.156 drochner aprint_normal(" interface %d", uaa->ifaceno);
1315 1.32 augustss #if 0
1316 1.99 augustss /*
1317 1.32 augustss * It gets very crowded with these locators on the attach line.
1318 1.32 augustss * They are not really needed since they are printed in the clear
1319 1.32 augustss * by each driver.
1320 1.32 augustss */
1321 1.32 augustss if (uaa->vendor != UHUB_UNK_VENDOR)
1322 1.101 thorpej aprint_normal(" vendor 0x%04x", uaa->vendor);
1323 1.32 augustss if (uaa->product != UHUB_UNK_PRODUCT)
1324 1.101 thorpej aprint_normal(" product 0x%04x", uaa->product);
1325 1.32 augustss if (uaa->release != UHUB_UNK_RELEASE)
1326 1.101 thorpej aprint_normal(" release 0x%04x", uaa->release);
1327 1.32 augustss #endif
1328 1.1 augustss return (UNCONF);
1329 1.1 augustss }
1330 1.1 augustss
1331 1.13 augustss void
1332 1.82 augustss usbd_fill_deviceinfo(usbd_device_handle dev, struct usb_device_info *di,
1333 1.82 augustss int usedev)
1334 1.13 augustss {
1335 1.13 augustss struct usbd_port *p;
1336 1.155 drochner int i, j, err, s;
1337 1.13 augustss
1338 1.151 drochner di->udi_bus = device_unit(dev->bus->usbctl);
1339 1.98 christos di->udi_addr = dev->address;
1340 1.98 christos di->udi_cookie = dev->cookie;
1341 1.139 pavel usbd_devinfo_vp(dev, di->udi_vendor, di->udi_product, usedev, 1);
1342 1.113 itojun usbd_printBCD(di->udi_release, sizeof(di->udi_release),
1343 1.113 itojun UGETW(dev->ddesc.bcdDevice));
1344 1.123 augustss di->udi_serial[0] = 0;
1345 1.123 augustss if (usedev)
1346 1.123 augustss (void)usbd_get_string(dev, dev->ddesc.iSerialNumber,
1347 1.123 augustss di->udi_serial);
1348 1.98 christos di->udi_vendorNo = UGETW(dev->ddesc.idVendor);
1349 1.98 christos di->udi_productNo = UGETW(dev->ddesc.idProduct);
1350 1.98 christos di->udi_releaseNo = UGETW(dev->ddesc.bcdDevice);
1351 1.98 christos di->udi_class = dev->ddesc.bDeviceClass;
1352 1.98 christos di->udi_subclass = dev->ddesc.bDeviceSubClass;
1353 1.98 christos di->udi_protocol = dev->ddesc.bDeviceProtocol;
1354 1.98 christos di->udi_config = dev->config;
1355 1.98 christos di->udi_power = dev->self_powered ? 0 : dev->power;
1356 1.98 christos di->udi_speed = dev->speed;
1357 1.65 augustss
1358 1.155 drochner if (dev->subdevlen > 0) {
1359 1.155 drochner for (i = 0, j = 0; i < dev->subdevlen &&
1360 1.155 drochner j < USB_MAX_DEVNAMES; i++) {
1361 1.155 drochner if (!dev->subdevs[i])
1362 1.155 drochner continue;
1363 1.155 drochner strncpy(di->udi_devnames[j], USBDEVPTRNAME(dev->subdevs[i]),
1364 1.65 augustss USB_MAX_DEVNAMELEN);
1365 1.155 drochner di->udi_devnames[j][USB_MAX_DEVNAMELEN-1] = '\0';
1366 1.155 drochner j++;
1367 1.65 augustss }
1368 1.65 augustss } else {
1369 1.155 drochner j = 0;
1370 1.65 augustss }
1371 1.155 drochner for (/* j is set */; j < USB_MAX_DEVNAMES; j++)
1372 1.155 drochner di->udi_devnames[j][0] = 0; /* empty */
1373 1.65 augustss
1374 1.13 augustss if (dev->hub) {
1375 1.99 augustss for (i = 0;
1376 1.98 christos i < sizeof(di->udi_ports) / sizeof(di->udi_ports[0]) &&
1377 1.13 augustss i < dev->hub->hubdesc.bNbrPorts;
1378 1.13 augustss i++) {
1379 1.13 augustss p = &dev->hub->ports[i];
1380 1.13 augustss if (p->device)
1381 1.56 augustss err = p->device->address;
1382 1.13 augustss else {
1383 1.13 augustss s = UGETW(p->status.wPortStatus);
1384 1.13 augustss if (s & UPS_PORT_ENABLED)
1385 1.56 augustss err = USB_PORT_ENABLED;
1386 1.13 augustss else if (s & UPS_SUSPEND)
1387 1.56 augustss err = USB_PORT_SUSPENDED;
1388 1.13 augustss else if (s & UPS_PORT_POWER)
1389 1.56 augustss err = USB_PORT_POWERED;
1390 1.13 augustss else
1391 1.56 augustss err = USB_PORT_DISABLED;
1392 1.13 augustss }
1393 1.98 christos di->udi_ports[i] = err;
1394 1.13 augustss }
1395 1.98 christos di->udi_nports = dev->hub->hubdesc.bNbrPorts;
1396 1.13 augustss } else
1397 1.98 christos di->udi_nports = 0;
1398 1.34 augustss }
1399 1.34 augustss
1400 1.139 pavel #ifdef COMPAT_30
1401 1.139 pavel void
1402 1.139 pavel usbd_fill_deviceinfo_old(usbd_device_handle dev, struct usb_device_info_old *di,
1403 1.139 pavel int usedev)
1404 1.139 pavel {
1405 1.139 pavel struct usbd_port *p;
1406 1.155 drochner int i, j, err, s;
1407 1.139 pavel
1408 1.151 drochner di->udi_bus = device_unit(dev->bus->usbctl);
1409 1.139 pavel di->udi_addr = dev->address;
1410 1.139 pavel di->udi_cookie = dev->cookie;
1411 1.139 pavel usbd_devinfo_vp(dev, di->udi_vendor, di->udi_product, usedev, 0);
1412 1.139 pavel usbd_printBCD(di->udi_release, sizeof(di->udi_release),
1413 1.139 pavel UGETW(dev->ddesc.bcdDevice));
1414 1.139 pavel di->udi_vendorNo = UGETW(dev->ddesc.idVendor);
1415 1.139 pavel di->udi_productNo = UGETW(dev->ddesc.idProduct);
1416 1.139 pavel di->udi_releaseNo = UGETW(dev->ddesc.bcdDevice);
1417 1.139 pavel di->udi_class = dev->ddesc.bDeviceClass;
1418 1.139 pavel di->udi_subclass = dev->ddesc.bDeviceSubClass;
1419 1.139 pavel di->udi_protocol = dev->ddesc.bDeviceProtocol;
1420 1.139 pavel di->udi_config = dev->config;
1421 1.139 pavel di->udi_power = dev->self_powered ? 0 : dev->power;
1422 1.139 pavel di->udi_speed = dev->speed;
1423 1.139 pavel
1424 1.155 drochner if (dev->subdevlen > 0) {
1425 1.155 drochner for (i = 0, j = 0; i < dev->subdevlen &&
1426 1.155 drochner j < USB_MAX_DEVNAMES; i++) {
1427 1.155 drochner if (!dev->subdevs[i])
1428 1.155 drochner continue;
1429 1.155 drochner strncpy(di->udi_devnames[j], USBDEVPTRNAME(dev->subdevs[i]),
1430 1.139 pavel USB_MAX_DEVNAMELEN);
1431 1.155 drochner di->udi_devnames[j][USB_MAX_DEVNAMELEN-1] = '\0';
1432 1.155 drochner j++;
1433 1.139 pavel }
1434 1.139 pavel } else {
1435 1.155 drochner j = 0;
1436 1.139 pavel }
1437 1.155 drochner for (/* j is set */; j < USB_MAX_DEVNAMES; j++)
1438 1.155 drochner di->udi_devnames[j][0] = 0; /* empty */
1439 1.139 pavel
1440 1.139 pavel if (dev->hub) {
1441 1.139 pavel for (i = 0;
1442 1.139 pavel i < sizeof(di->udi_ports) / sizeof(di->udi_ports[0]) &&
1443 1.139 pavel i < dev->hub->hubdesc.bNbrPorts;
1444 1.139 pavel i++) {
1445 1.139 pavel p = &dev->hub->ports[i];
1446 1.139 pavel if (p->device)
1447 1.139 pavel err = p->device->address;
1448 1.139 pavel else {
1449 1.139 pavel s = UGETW(p->status.wPortStatus);
1450 1.139 pavel if (s & UPS_PORT_ENABLED)
1451 1.139 pavel err = USB_PORT_ENABLED;
1452 1.139 pavel else if (s & UPS_SUSPEND)
1453 1.139 pavel err = USB_PORT_SUSPENDED;
1454 1.139 pavel else if (s & UPS_PORT_POWER)
1455 1.139 pavel err = USB_PORT_POWERED;
1456 1.139 pavel else
1457 1.139 pavel err = USB_PORT_DISABLED;
1458 1.139 pavel }
1459 1.139 pavel di->udi_ports[i] = err;
1460 1.139 pavel }
1461 1.139 pavel di->udi_nports = dev->hub->hubdesc.bNbrPorts;
1462 1.139 pavel } else
1463 1.139 pavel di->udi_nports = 0;
1464 1.139 pavel }
1465 1.139 pavel #endif
1466 1.139 pavel
1467 1.139 pavel
1468 1.34 augustss void
1469 1.78 augustss usb_free_device(usbd_device_handle dev)
1470 1.34 augustss {
1471 1.34 augustss int ifcidx, nifc;
1472 1.34 augustss
1473 1.53 augustss if (dev->default_pipe != NULL)
1474 1.34 augustss usbd_kill_pipe(dev->default_pipe);
1475 1.53 augustss if (dev->ifaces != NULL) {
1476 1.34 augustss nifc = dev->cdesc->bNumInterface;
1477 1.34 augustss for (ifcidx = 0; ifcidx < nifc; ifcidx++)
1478 1.34 augustss usbd_free_iface_data(dev, ifcidx);
1479 1.34 augustss free(dev->ifaces, M_USB);
1480 1.34 augustss }
1481 1.53 augustss if (dev->cdesc != NULL)
1482 1.34 augustss free(dev->cdesc, M_USB);
1483 1.155 drochner if (dev->subdevlen > 0) {
1484 1.34 augustss free(dev->subdevs, M_USB);
1485 1.155 drochner dev->subdevlen = 0;
1486 1.155 drochner }
1487 1.34 augustss free(dev, M_USB);
1488 1.1 augustss }
1489 1.47 augustss
1490 1.47 augustss /*
1491 1.47 augustss * The general mechanism for detaching drivers works as follows: Each
1492 1.47 augustss * driver is responsible for maintaining a reference count on the
1493 1.47 augustss * number of outstanding references to its softc (e.g. from
1494 1.47 augustss * processing hanging in a read or write). The detach method of the
1495 1.47 augustss * driver decrements this counter and flags in the softc that the
1496 1.47 augustss * driver is dying and then wakes any sleepers. It then sleeps on the
1497 1.47 augustss * softc. Each place that can sleep must maintain the reference
1498 1.47 augustss * count. When the reference count drops to -1 (0 is the normal value
1499 1.47 augustss * of the reference count) the a wakeup on the softc is performed
1500 1.47 augustss * signaling to the detach waiter that all references are gone.
1501 1.47 augustss */
1502 1.47 augustss
1503 1.47 augustss /*
1504 1.47 augustss * Called from process context when we discover that a port has
1505 1.47 augustss * been disconnected.
1506 1.47 augustss */
1507 1.47 augustss void
1508 1.78 augustss usb_disconnect_port(struct usbd_port *up, device_ptr_t parent)
1509 1.47 augustss {
1510 1.47 augustss usbd_device_handle dev = up->device;
1511 1.152 cegger const char *hubname = USBDEVPTRNAME(parent);
1512 1.47 augustss int i;
1513 1.47 augustss
1514 1.99 augustss DPRINTFN(3,("uhub_disconnect: up=%p dev=%p port=%d\n",
1515 1.47 augustss up, dev, up->portno));
1516 1.48 augustss
1517 1.48 augustss #ifdef DIAGNOSTIC
1518 1.57 augustss if (dev == NULL) {
1519 1.48 augustss printf("usb_disconnect_port: no device\n");
1520 1.48 augustss return;
1521 1.48 augustss }
1522 1.48 augustss #endif
1523 1.47 augustss
1524 1.155 drochner if (dev->subdevlen > 0) {
1525 1.57 augustss DPRINTFN(3,("usb_disconnect_port: disconnect subdevs\n"));
1526 1.155 drochner for (i = 0; i < dev->subdevlen; i++) {
1527 1.155 drochner if (!dev->subdevs[i])
1528 1.155 drochner continue;
1529 1.99 augustss printf("%s: at %s", USBDEVPTRNAME(dev->subdevs[i]),
1530 1.51 augustss hubname);
1531 1.51 augustss if (up->portno != 0)
1532 1.51 augustss printf(" port %d", up->portno);
1533 1.51 augustss printf(" (addr %d) disconnected\n", dev->address);
1534 1.47 augustss config_detach(dev->subdevs[i], DETACH_FORCE);
1535 1.47 augustss }
1536 1.160 drochner KASSERT(!dev->nifaces_claimed);
1537 1.47 augustss }
1538 1.47 augustss
1539 1.65 augustss usbd_add_dev_event(USB_EVENT_DEVICE_DETACH, dev);
1540 1.57 augustss dev->bus->devices[dev->address] = NULL;
1541 1.57 augustss up->device = NULL;
1542 1.47 augustss usb_free_device(dev);
1543 1.47 augustss }
1544