usb_subr.c revision 1.223.2.3 1 /* $NetBSD: usb_subr.c,v 1.223.2.3 2018/09/06 06:56:05 pgoyette Exp $ */
2 /* $FreeBSD: src/sys/dev/usb/usb_subr.c,v 1.18 1999/11/17 22:33:47 n_hibma Exp $ */
3
4 /*
5 * Copyright (c) 1998, 2004 The NetBSD Foundation, Inc.
6 * All rights reserved.
7 *
8 * This code is derived from software contributed to The NetBSD Foundation
9 * by Lennart Augustsson (lennart (at) augustsson.net) at
10 * Carlstedt Research & Technology.
11 *
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
14 * are met:
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions and the following disclaimer.
17 * 2. Redistributions in binary form must reproduce the above copyright
18 * notice, this list of conditions and the following disclaimer in the
19 * documentation and/or other materials provided with the distribution.
20 *
21 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
22 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
23 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
24 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
25 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
31 * POSSIBILITY OF SUCH DAMAGE.
32 */
33
34 #include <sys/cdefs.h>
35 __KERNEL_RCSID(0, "$NetBSD: usb_subr.c,v 1.223.2.3 2018/09/06 06:56:05 pgoyette Exp $");
36
37 #ifdef _KERNEL_OPT
38 #include "opt_compat_netbsd.h"
39 #include "opt_usb.h"
40 #include "opt_usbverbose.h"
41 #endif
42
43 #include <sys/param.h>
44 #include <sys/systm.h>
45 #include <sys/kernel.h>
46 #include <sys/kmem.h>
47 #include <sys/device.h>
48 #include <sys/select.h>
49 #include <sys/proc.h>
50
51 #include <sys/bus.h>
52 #include <sys/module.h>
53
54 #include <dev/usb/usb.h>
55
56 #include <dev/usb/usbdi.h>
57 #include <dev/usb/usbdi_util.h>
58 #include <dev/usb/usbdivar.h>
59 #include <dev/usb/usbdevs.h>
60 #include <dev/usb/usb_quirks.h>
61 #include <dev/usb/usb_verbose.h>
62 #include <dev/usb/usbhist.h>
63
64 #include "locators.h"
65
66 #define DPRINTF(FMT,A,B,C,D) USBHIST_LOG(usbdebug,FMT,A,B,C,D)
67 #define DPRINTFN(N,FMT,A,B,C,D) USBHIST_LOGN(usbdebug,N,FMT,A,B,C,D)
68
69 Static usbd_status usbd_set_config(struct usbd_device *, int);
70 Static void usbd_devinfo(struct usbd_device *, int, char *, size_t);
71 Static int usbd_getnewaddr(struct usbd_bus *);
72 Static int usbd_print(void *, const char *);
73 Static int usbd_ifprint(void *, const char *);
74 Static void usbd_free_iface_data(struct usbd_device *, int);
75
76 uint32_t usb_cookie_no = 0;
77
78 Static const char * const usbd_error_strs[] = {
79 "NORMAL_COMPLETION",
80 "IN_PROGRESS",
81 "PENDING_REQUESTS",
82 "NOT_STARTED",
83 "INVAL",
84 "NOMEM",
85 "CANCELLED",
86 "BAD_ADDRESS",
87 "IN_USE",
88 "NO_ADDR",
89 "SET_ADDR_FAILED",
90 "NO_POWER",
91 "TOO_DEEP",
92 "IOERROR",
93 "NOT_CONFIGURED",
94 "TIMEOUT",
95 "SHORT_XFER",
96 "STALLED",
97 "INTERRUPTED",
98 "XXX",
99 };
100
101 DEV_VERBOSE_DEFINE(usb);
102
103 const char *
104 usbd_errstr(usbd_status err)
105 {
106 static char buffer[5];
107
108 if (err < USBD_ERROR_MAX) {
109 return usbd_error_strs[err];
110 } else {
111 snprintf(buffer, sizeof(buffer), "%d", err);
112 return buffer;
113 }
114 }
115
116 usbd_status
117 usbd_get_string_desc(struct usbd_device *dev, int sindex, int langid,
118 usb_string_descriptor_t *sdesc, int *sizep)
119 {
120 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
121 usb_device_request_t req;
122 usbd_status err;
123 int actlen;
124
125 req.bmRequestType = UT_READ_DEVICE;
126 req.bRequest = UR_GET_DESCRIPTOR;
127 USETW2(req.wValue, UDESC_STRING, sindex);
128 USETW(req.wIndex, langid);
129 USETW(req.wLength, 2); /* only size byte first */
130 err = usbd_do_request_flags(dev, &req, sdesc, USBD_SHORT_XFER_OK,
131 &actlen, USBD_DEFAULT_TIMEOUT);
132 if (err)
133 return err;
134
135 if (actlen < 2)
136 return USBD_SHORT_XFER;
137
138 USETW(req.wLength, sdesc->bLength); /* the whole string */
139 err = usbd_do_request_flags(dev, &req, sdesc, USBD_SHORT_XFER_OK,
140 &actlen, USBD_DEFAULT_TIMEOUT);
141 if (err)
142 return err;
143
144 if (actlen != sdesc->bLength) {
145 DPRINTF("expected %jd, got %jd", sdesc->bLength, actlen, 0, 0);
146 }
147
148 *sizep = actlen;
149 return USBD_NORMAL_COMPLETION;
150 }
151
152 static void
153 usbd_trim_spaces(char *p)
154 {
155 char *q, *e;
156
157 q = e = p;
158 while (*q == ' ') /* skip leading spaces */
159 q++;
160 while ((*p = *q++)) /* copy string */
161 if (*p++ != ' ') /* remember last non-space */
162 e = p;
163 *e = '\0'; /* kill trailing spaces */
164 }
165
166 static void
167 usbd_get_device_string(struct usbd_device *ud, uByte index, char **buf)
168 {
169 char *b;
170 usbd_status err;
171
172 b = kmem_alloc(USB_MAX_ENCODED_STRING_LEN, KM_SLEEP);
173 err = usbd_get_string0(ud, index, b, true);
174 if (err != USBD_NORMAL_COMPLETION) {
175 kmem_free(b, USB_MAX_ENCODED_STRING_LEN);
176 b = NULL;
177 } else {
178 usbd_trim_spaces(b);
179 }
180
181 *buf = b;
182 }
183
184 void
185 usbd_get_device_strings(struct usbd_device *ud)
186 {
187 usb_device_descriptor_t *udd = &ud->ud_ddesc;
188
189 usbd_get_device_string(ud, udd->iManufacturer, &ud->ud_vendor);
190 usbd_get_device_string(ud, udd->iProduct, &ud->ud_product);
191 usbd_get_device_string(ud, udd->iSerialNumber, &ud->ud_serial);
192 }
193
194
195 void
196 usbd_devinfo_vp(struct usbd_device *dev, char *v, size_t vl, char *p,
197 size_t pl, int usedev, int useencoded)
198 {
199 usb_device_descriptor_t *udd = &dev->ud_ddesc;
200 if (dev == NULL)
201 return;
202
203 v[0] = p[0] = '\0';
204
205 if (usedev) {
206 if (usbd_get_string0(dev, udd->iManufacturer, v, useencoded) ==
207 USBD_NORMAL_COMPLETION)
208 usbd_trim_spaces(v);
209 if (usbd_get_string0(dev, udd->iProduct, p, useencoded) ==
210 USBD_NORMAL_COMPLETION)
211 usbd_trim_spaces(p);
212 } else {
213 if (dev->ud_vendor) {
214 strlcpy(v, dev->ud_vendor, vl);
215 }
216 if (dev->ud_product) {
217 strlcpy(p, dev->ud_product, pl);
218 }
219 }
220 if (v[0] == '\0')
221 usb_findvendor(v, vl, UGETW(udd->idVendor));
222 if (p[0] == '\0')
223 usb_findproduct(p, pl, UGETW(udd->idVendor),
224 UGETW(udd->idProduct));
225 }
226
227 int
228 usbd_printBCD(char *cp, size_t l, int bcd)
229 {
230 return snprintf(cp, l, "%x.%02x", bcd >> 8, bcd & 0xff);
231 }
232
233 Static void
234 usbd_devinfo(struct usbd_device *dev, int showclass, char *cp, size_t l)
235 {
236 usb_device_descriptor_t *udd = &dev->ud_ddesc;
237 char *vendor, *product;
238 int bcdDevice, bcdUSB;
239 char *ep;
240
241 vendor = kmem_alloc(USB_MAX_ENCODED_STRING_LEN * 2, KM_SLEEP);
242 product = &vendor[USB_MAX_ENCODED_STRING_LEN];
243
244 ep = cp + l;
245
246 usbd_devinfo_vp(dev, vendor, USB_MAX_ENCODED_STRING_LEN,
247 product, USB_MAX_ENCODED_STRING_LEN, 0, 1);
248 cp += snprintf(cp, ep - cp, "%s (%#04x) %s (%#04x)", vendor,
249 UGETW(udd->idVendor), product, UGETW(udd->idProduct));
250 if (showclass)
251 cp += snprintf(cp, ep - cp, ", class %d/%d",
252 udd->bDeviceClass, udd->bDeviceSubClass);
253 bcdUSB = UGETW(udd->bcdUSB);
254 bcdDevice = UGETW(udd->bcdDevice);
255 cp += snprintf(cp, ep - cp, ", rev ");
256 cp += usbd_printBCD(cp, ep - cp, bcdUSB);
257 *cp++ = '/';
258 cp += usbd_printBCD(cp, ep - cp, bcdDevice);
259 cp += snprintf(cp, ep - cp, ", addr %d", dev->ud_addr);
260 *cp = 0;
261 kmem_free(vendor, USB_MAX_ENCODED_STRING_LEN * 2);
262 }
263
264 char *
265 usbd_devinfo_alloc(struct usbd_device *dev, int showclass)
266 {
267 char *devinfop;
268
269 devinfop = kmem_alloc(DEVINFOSIZE, KM_SLEEP);
270 usbd_devinfo(dev, showclass, devinfop, DEVINFOSIZE);
271 return devinfop;
272 }
273
274 void
275 usbd_devinfo_free(char *devinfop)
276 {
277 kmem_free(devinfop, DEVINFOSIZE);
278 }
279
280 /* Delay for a certain number of ms */
281 void
282 usb_delay_ms_locked(struct usbd_bus *bus, u_int ms, kmutex_t *lock)
283 {
284 /* Wait at least two clock ticks so we know the time has passed. */
285 if (bus->ub_usepolling || cold)
286 delay((ms+1) * 1000);
287 else
288 kpause("usbdly", false, (ms*hz+999)/1000 + 1, lock);
289 }
290
291 void
292 usb_delay_ms(struct usbd_bus *bus, u_int ms)
293 {
294 usb_delay_ms_locked(bus, ms, NULL);
295 }
296
297 /* Delay given a device handle. */
298 void
299 usbd_delay_ms_locked(struct usbd_device *dev, u_int ms, kmutex_t *lock)
300 {
301 usb_delay_ms_locked(dev->ud_bus, ms, lock);
302 }
303
304 /* Delay given a device handle. */
305 void
306 usbd_delay_ms(struct usbd_device *dev, u_int ms)
307 {
308 usb_delay_ms_locked(dev->ud_bus, ms, NULL);
309 }
310
311 usbd_status
312 usbd_reset_port(struct usbd_device *dev, int port, usb_port_status_t *ps)
313 {
314 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
315 usb_device_request_t req;
316 usbd_status err;
317 int n;
318
319 req.bmRequestType = UT_WRITE_CLASS_OTHER;
320 req.bRequest = UR_SET_FEATURE;
321 USETW(req.wValue, UHF_PORT_RESET);
322 USETW(req.wIndex, port);
323 USETW(req.wLength, 0);
324 err = usbd_do_request(dev, &req, 0);
325 DPRINTFN(1, "port %jd reset done, error=%jd", port, err, 0, 0);
326 if (err)
327 return err;
328 n = 10;
329 do {
330 /* Wait for device to recover from reset. */
331 usbd_delay_ms(dev, USB_PORT_RESET_DELAY);
332 err = usbd_get_port_status(dev, port, ps);
333 if (err) {
334 DPRINTF("get status failed %jd", err, 0, 0, 0);
335 return err;
336 }
337 /* If the device disappeared, just give up. */
338 if (!(UGETW(ps->wPortStatus) & UPS_CURRENT_CONNECT_STATUS))
339 return USBD_NORMAL_COMPLETION;
340 } while ((UGETW(ps->wPortChange) & UPS_C_PORT_RESET) == 0 && --n > 0);
341 if (n == 0)
342 return USBD_TIMEOUT;
343 err = usbd_clear_port_feature(dev, port, UHF_C_PORT_RESET);
344 #ifdef USB_DEBUG
345 if (err)
346 DPRINTF("clear port feature failed %jd", err, 0, 0, 0);
347 #endif
348
349 /* Wait for the device to recover from reset. */
350 usbd_delay_ms(dev, USB_PORT_RESET_RECOVERY);
351 return err;
352 }
353
354 usb_interface_descriptor_t *
355 usbd_find_idesc(usb_config_descriptor_t *cd, int ifaceidx, int altidx)
356 {
357 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
358 char *p = (char *)cd;
359 char *end = p + UGETW(cd->wTotalLength);
360 usb_interface_descriptor_t *d;
361 int curidx, lastidx, curaidx = 0;
362
363 for (curidx = lastidx = -1; p < end; ) {
364 d = (usb_interface_descriptor_t *)p;
365 DPRINTFN(4, "idx=%jd(%jd) altidx=%jd(%jd)", ifaceidx, curidx,
366 altidx, curaidx);
367 DPRINTFN(4, "len=%jd type=%jd", d->bLength, d->bDescriptorType,
368 0, 0);
369 if (d->bLength == 0) /* bad descriptor */
370 break;
371 p += d->bLength;
372 if (p <= end && d->bDescriptorType == UDESC_INTERFACE) {
373 if (d->bInterfaceNumber != lastidx) {
374 lastidx = d->bInterfaceNumber;
375 curidx++;
376 curaidx = 0;
377 } else
378 curaidx++;
379 if (ifaceidx == curidx && altidx == curaidx)
380 return d;
381 }
382 }
383 return NULL;
384 }
385
386 usb_endpoint_descriptor_t *
387 usbd_find_edesc(usb_config_descriptor_t *cd, int ifaceidx, int altidx,
388 int endptidx)
389 {
390 char *p = (char *)cd;
391 char *end = p + UGETW(cd->wTotalLength);
392 usb_interface_descriptor_t *d;
393 usb_endpoint_descriptor_t *e;
394 int curidx;
395
396 d = usbd_find_idesc(cd, ifaceidx, altidx);
397 if (d == NULL)
398 return NULL;
399 if (endptidx >= d->bNumEndpoints) /* quick exit */
400 return NULL;
401
402 curidx = -1;
403 for (p = (char *)d + d->bLength; p < end; ) {
404 e = (usb_endpoint_descriptor_t *)p;
405 if (e->bLength == 0) /* bad descriptor */
406 break;
407 p += e->bLength;
408 if (p <= end && e->bDescriptorType == UDESC_INTERFACE)
409 return NULL;
410 if (p <= end && e->bDescriptorType == UDESC_ENDPOINT) {
411 curidx++;
412 if (curidx == endptidx)
413 return e;
414 }
415 }
416 return NULL;
417 }
418
419 usbd_status
420 usbd_fill_iface_data(struct usbd_device *dev, int ifaceidx, int altidx)
421 {
422 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
423 struct usbd_interface *ifc = &dev->ud_ifaces[ifaceidx];
424 usb_interface_descriptor_t *idesc;
425 char *p, *end;
426 int endpt, nendpt;
427
428 DPRINTFN(4, "ifaceidx=%jd altidx=%jd", ifaceidx, altidx, 0, 0);
429 idesc = usbd_find_idesc(dev->ud_cdesc, ifaceidx, altidx);
430 if (idesc == NULL)
431 return USBD_INVAL;
432 ifc->ui_dev = dev;
433 ifc->ui_idesc = idesc;
434 ifc->ui_index = ifaceidx;
435 ifc->ui_altindex = altidx;
436 nendpt = ifc->ui_idesc->bNumEndpoints;
437 DPRINTFN(4, "found idesc nendpt=%jd", nendpt, 0, 0, 0);
438 if (nendpt != 0) {
439 ifc->ui_endpoints = kmem_alloc(nendpt * sizeof(struct usbd_endpoint),
440 KM_SLEEP);
441 } else
442 ifc->ui_endpoints = NULL;
443 ifc->ui_priv = NULL;
444 p = (char *)ifc->ui_idesc + ifc->ui_idesc->bLength;
445 end = (char *)dev->ud_cdesc + UGETW(dev->ud_cdesc->wTotalLength);
446 #define ed ((usb_endpoint_descriptor_t *)p)
447 for (endpt = 0; endpt < nendpt; endpt++) {
448 DPRINTFN(10, "endpt=%jd", endpt, 0, 0, 0);
449 for (; p < end; p += ed->bLength) {
450 DPRINTFN(10, "p=%#jx end=%#jx len=%jd type=%jd",
451 (uintptr_t)p, (uintptr_t)end, ed->bLength,
452 ed->bDescriptorType);
453 if (p + ed->bLength <= end && ed->bLength != 0 &&
454 ed->bDescriptorType == UDESC_ENDPOINT)
455 goto found;
456 if (ed->bLength == 0 ||
457 ed->bDescriptorType == UDESC_INTERFACE)
458 break;
459 }
460 /* passed end, or bad desc */
461 printf("usbd_fill_iface_data: bad descriptor(s): %s\n",
462 ed->bLength == 0 ? "0 length" :
463 ed->bDescriptorType == UDESC_INTERFACE ? "iface desc":
464 "out of data");
465 goto bad;
466 found:
467 ifc->ui_endpoints[endpt].ue_edesc = ed;
468 if (dev->ud_speed == USB_SPEED_HIGH) {
469 u_int mps;
470 /* Control and bulk endpoints have max packet limits. */
471 switch (UE_GET_XFERTYPE(ed->bmAttributes)) {
472 case UE_CONTROL:
473 mps = USB_2_MAX_CTRL_PACKET;
474 goto check;
475 case UE_BULK:
476 mps = USB_2_MAX_BULK_PACKET;
477 check:
478 if (UGETW(ed->wMaxPacketSize) != mps) {
479 USETW(ed->wMaxPacketSize, mps);
480 #ifdef DIAGNOSTIC
481 printf("usbd_fill_iface_data: bad max "
482 "packet size\n");
483 #endif
484 }
485 break;
486 default:
487 break;
488 }
489 }
490 ifc->ui_endpoints[endpt].ue_refcnt = 0;
491 ifc->ui_endpoints[endpt].ue_toggle = 0;
492 p += ed->bLength;
493 }
494 #undef ed
495 LIST_INIT(&ifc->ui_pipes);
496 return USBD_NORMAL_COMPLETION;
497
498 bad:
499 if (ifc->ui_endpoints != NULL) {
500 kmem_free(ifc->ui_endpoints, nendpt * sizeof(struct usbd_endpoint));
501 ifc->ui_endpoints = NULL;
502 }
503 return USBD_INVAL;
504 }
505
506 void
507 usbd_free_iface_data(struct usbd_device *dev, int ifcno)
508 {
509 struct usbd_interface *ifc = &dev->ud_ifaces[ifcno];
510 if (ifc->ui_endpoints) {
511 int nendpt = ifc->ui_idesc->bNumEndpoints;
512 size_t sz = nendpt * sizeof(struct usbd_endpoint);
513 kmem_free(ifc->ui_endpoints, sz);
514 }
515 }
516
517 Static usbd_status
518 usbd_set_config(struct usbd_device *dev, int conf)
519 {
520 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
521 usb_device_request_t req;
522
523 DPRINTFN(5, "dev %#jx conf %jd", (uintptr_t)dev, conf, 0, 0);
524
525 req.bmRequestType = UT_WRITE_DEVICE;
526 req.bRequest = UR_SET_CONFIG;
527 USETW(req.wValue, conf);
528 USETW(req.wIndex, 0);
529 USETW(req.wLength, 0);
530 return usbd_do_request(dev, &req, 0);
531 }
532
533 usbd_status
534 usbd_set_config_no(struct usbd_device *dev, int no, int msg)
535 {
536 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
537 usb_config_descriptor_t cd;
538 usbd_status err;
539 int index;
540
541 if (no == USB_UNCONFIG_NO)
542 return usbd_set_config_index(dev, USB_UNCONFIG_INDEX, msg);
543
544 DPRINTFN(5, "%jd", no, 0, 0, 0);
545 /* Figure out what config index to use. */
546 for (index = 0; index < dev->ud_ddesc.bNumConfigurations; index++) {
547 err = usbd_get_config_desc(dev, index, &cd);
548 if (err)
549 return err;
550 if (cd.bConfigurationValue == no)
551 return usbd_set_config_index(dev, index, msg);
552 }
553 return USBD_INVAL;
554 }
555
556 usbd_status
557 usbd_set_config_index(struct usbd_device *dev, int index, int msg)
558 {
559 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
560 usb_config_descriptor_t cd, *cdp;
561 usb_bos_descriptor_t *bdp = NULL;
562 usbd_status err;
563 int i, ifcidx, nifc, len, selfpowered, power;
564
565 DPRINTFN(5, "dev=%#jx index=%jd", (uintptr_t)dev, index, 0, 0);
566
567 if (index >= dev->ud_ddesc.bNumConfigurations &&
568 index != USB_UNCONFIG_INDEX) {
569 /* panic? */
570 printf("usbd_set_config_index: illegal index\n");
571 return USBD_INVAL;
572 }
573
574 /* XXX check that all interfaces are idle */
575 if (dev->ud_config != USB_UNCONFIG_NO) {
576 DPRINTF("free old config", 0, 0, 0, 0);
577 /* Free all configuration data structures. */
578 nifc = dev->ud_cdesc->bNumInterface;
579 for (ifcidx = 0; ifcidx < nifc; ifcidx++)
580 usbd_free_iface_data(dev, ifcidx);
581 kmem_free(dev->ud_ifaces, nifc * sizeof(struct usbd_interface));
582 kmem_free(dev->ud_cdesc, UGETW(dev->ud_cdesc->wTotalLength));
583 if (dev->ud_bdesc != NULL)
584 kmem_free(dev->ud_bdesc,
585 UGETW(dev->ud_bdesc->wTotalLength));
586 dev->ud_ifaces = NULL;
587 dev->ud_cdesc = NULL;
588 dev->ud_bdesc = NULL;
589 dev->ud_config = USB_UNCONFIG_NO;
590 }
591
592 if (index == USB_UNCONFIG_INDEX) {
593 /* We are unconfiguring the device, so leave unallocated. */
594 DPRINTF("set config 0", 0, 0, 0, 0);
595 err = usbd_set_config(dev, USB_UNCONFIG_NO);
596 if (err) {
597 DPRINTF("setting config=0 failed, err = %jd", err,
598 0, 0, 0);
599 }
600 return err;
601 }
602
603 /* Get the short descriptor. */
604 err = usbd_get_config_desc(dev, index, &cd);
605 if (err) {
606 DPRINTF("get_config_desc=%jd", err, 0, 0, 0);
607 return err;
608 }
609 len = UGETW(cd.wTotalLength);
610 if (len == 0) {
611 DPRINTF("empty short descriptor", 0, 0, 0, 0);
612 return USBD_INVAL;
613 }
614 cdp = kmem_alloc(len, KM_SLEEP);
615
616 /* Get the full descriptor. Try a few times for slow devices. */
617 for (i = 0; i < 3; i++) {
618 err = usbd_get_desc(dev, UDESC_CONFIG, index, len, cdp);
619 if (!err)
620 break;
621 usbd_delay_ms(dev, 200);
622 }
623 if (err) {
624 DPRINTF("get_desc=%jd", err, 0, 0, 0);
625 goto bad;
626 }
627 if (cdp->bDescriptorType != UDESC_CONFIG) {
628 DPRINTF("bad desc %jd", cdp->bDescriptorType, 0, 0, 0);
629 err = USBD_INVAL;
630 goto bad;
631 }
632
633 if (USB_IS_SS(dev->ud_speed)) {
634 usb_bos_descriptor_t bd;
635
636 /* get short bos desc */
637 err = usbd_get_bos_desc(dev, index, &bd);
638 if (!err) {
639 int blen = UGETW(bd.wTotalLength);
640 if (blen == 0) {
641 DPRINTF("empty bos descriptor", 0, 0, 0, 0);
642 err = USBD_INVAL;
643 goto bad;
644 }
645 bdp = kmem_alloc(blen, KM_SLEEP);
646
647 /* Get the full desc */
648 for (i = 0; i < 3; i++) {
649 err = usbd_get_desc(dev, UDESC_BOS, index, blen,
650 bdp);
651 if (!err)
652 break;
653 usbd_delay_ms(dev, 200);
654 }
655 if (err || bdp->bDescriptorType != UDESC_BOS) {
656 DPRINTF("error %jd or bad desc %jd", err,
657 bdp->bDescriptorType, 0, 0);
658 kmem_free(bdp, blen);
659 bdp = NULL;
660 }
661 }
662 }
663 dev->ud_bdesc = bdp;
664
665 /*
666 * Figure out if the device is self or bus powered.
667 */
668 #if 0 /* XXX various devices don't report the power state correctly */
669 selfpowered = 0;
670 err = usbd_get_device_status(dev, &ds);
671 if (!err && (UGETW(ds.wStatus) & UDS_SELF_POWERED))
672 selfpowered = 1;
673 #endif
674 /*
675 * Use the power state in the configuration we are going
676 * to set. This doesn't necessarily reflect the actual
677 * power state of the device; the driver can control this
678 * by choosing the appropriate configuration.
679 */
680 selfpowered = !!(cdp->bmAttributes & UC_SELF_POWERED);
681
682 DPRINTF("addr %jd cno=%jd attr=%#02jx, selfpowered=%jd",
683 dev->ud_addr, cdp->bConfigurationValue, cdp->bmAttributes,
684 selfpowered);
685 DPRINTF("max power=%jd", cdp->bMaxPower * 2, 0, 0, 0);
686
687 /* Check if we have enough power. */
688 #if 0 /* this is a no-op, see above */
689 if ((cdp->bmAttributes & UC_SELF_POWERED) && !selfpowered) {
690 if (msg)
691 printf("%s: device addr %d (config %d): "
692 "can't set self powered configuration\n",
693 device_xname(dev->ud_bus->bdev), dev->ud_addr,
694 cdp->bConfigurationValue);
695 err = USBD_NO_POWER;
696 goto bad;
697 }
698 #endif
699 #ifdef USB_DEBUG
700 if (dev->ud_powersrc == NULL) {
701 DPRINTF("No power source?", 0, 0, 0, 0);
702 err = USBD_IOERROR;
703 goto bad;
704 }
705 #endif
706 power = cdp->bMaxPower * 2;
707 if (power > dev->ud_powersrc->up_power) {
708 DPRINTF("power exceeded %jd %jd", power,
709 dev->ud_powersrc->up_power, 0, 0);
710 /* XXX print nicer message. */
711 if (msg)
712 printf("%s: device addr %d (config %d) exceeds power "
713 "budget, %d mA > %d mA\n",
714 device_xname(dev->ud_bus->ub_usbctl), dev->ud_addr,
715 cdp->bConfigurationValue,
716 power, dev->ud_powersrc->up_power);
717 err = USBD_NO_POWER;
718 goto bad;
719 }
720 dev->ud_power = power;
721 dev->ud_selfpowered = selfpowered;
722
723 /* Set the actual configuration value. */
724 DPRINTF("set config %jd", cdp->bConfigurationValue, 0, 0, 0);
725 err = usbd_set_config(dev, cdp->bConfigurationValue);
726 if (err) {
727 DPRINTF("setting config=%jd failed, error=%jd",
728 cdp->bConfigurationValue, err, 0, 0);
729 goto bad;
730 }
731
732 /* Allocate and fill interface data. */
733 nifc = cdp->bNumInterface;
734 if (nifc == 0) {
735 DPRINTF("no interfaces", 0, 0, 0, 0);
736 err = USBD_INVAL;
737 goto bad;
738 }
739 dev->ud_ifaces = kmem_alloc(nifc * sizeof(struct usbd_interface),
740 KM_SLEEP);
741 DPRINTFN(5, "dev=%#jx cdesc=%#jx", (uintptr_t)dev, (uintptr_t)cdp,
742 0, 0);
743 dev->ud_cdesc = cdp;
744 dev->ud_config = cdp->bConfigurationValue;
745 for (ifcidx = 0; ifcidx < nifc; ifcidx++) {
746 err = usbd_fill_iface_data(dev, ifcidx, 0);
747 if (err) {
748 while (--ifcidx >= 0)
749 usbd_free_iface_data(dev, ifcidx);
750 goto bad;
751 }
752 }
753
754 return USBD_NORMAL_COMPLETION;
755
756 bad:
757 kmem_free(cdp, len);
758 if (bdp != NULL) {
759 kmem_free(bdp, UGETW(bdp->wTotalLength));
760 dev->ud_bdesc = NULL;
761 }
762 return err;
763 }
764
765 /* XXX add function for alternate settings */
766
767 usbd_status
768 usbd_setup_pipe(struct usbd_device *dev, struct usbd_interface *iface,
769 struct usbd_endpoint *ep, int ival, struct usbd_pipe **pipe)
770 {
771 return usbd_setup_pipe_flags(dev, iface, ep, ival, pipe, 0);
772 }
773
774 usbd_status
775 usbd_setup_pipe_flags(struct usbd_device *dev, struct usbd_interface *iface,
776 struct usbd_endpoint *ep, int ival, struct usbd_pipe **pipe, uint8_t flags)
777 {
778 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
779 struct usbd_pipe *p;
780 usbd_status err;
781
782 p = kmem_alloc(dev->ud_bus->ub_pipesize, KM_SLEEP);
783 DPRINTFN(1, "dev=%#jx addr=%jd iface=%#jx ep=%#jx",
784 (uintptr_t)dev, dev->ud_addr, (uintptr_t)iface, (uintptr_t)ep);
785 DPRINTFN(1, "pipe=%#jx", (uintptr_t)p, 0, 0, 0);
786 p->up_dev = dev;
787 p->up_iface = iface;
788 p->up_endpoint = ep;
789 ep->ue_refcnt++;
790 p->up_intrxfer = NULL;
791 p->up_running = 0;
792 p->up_aborting = 0;
793 p->up_serialise = true;
794 p->up_repeat = 0;
795 p->up_interval = ival;
796 p->up_flags = flags;
797 p->up_serialise = true;
798 SIMPLEQ_INIT(&p->up_queue);
799 err = dev->ud_bus->ub_methods->ubm_open(p);
800 if (err) {
801 DPRINTF("endpoint=%#jx failed, error=%jd",
802 (uintptr_t)ep->ue_edesc->bEndpointAddress, err, 0, 0);
803 kmem_free(p, dev->ud_bus->ub_pipesize);
804 return err;
805 }
806
807 KASSERT(p->up_methods->upm_start || p->up_serialise == false);
808
809 usb_init_task(&p->up_async_task, usbd_clear_endpoint_stall_task, p,
810 USB_TASKQ_MPSAFE);
811 DPRINTFN(1, "pipe=%#jx", (uintptr_t)p, 0, 0, 0);
812 *pipe = p;
813 return USBD_NORMAL_COMPLETION;
814 }
815
816 /* Abort the device control pipe. */
817 void
818 usbd_kill_pipe(struct usbd_pipe *pipe)
819 {
820 usbd_abort_pipe(pipe);
821 usbd_lock_pipe(pipe);
822 pipe->up_methods->upm_close(pipe);
823 usbd_unlock_pipe(pipe);
824 usb_rem_task_wait(pipe->up_dev, &pipe->up_async_task, USB_TASKQ_DRIVER,
825 NULL);
826 pipe->up_endpoint->ue_refcnt--;
827 kmem_free(pipe, pipe->up_dev->ud_bus->ub_pipesize);
828 }
829
830 int
831 usbd_getnewaddr(struct usbd_bus *bus)
832 {
833 int addr;
834
835 for (addr = 1; addr < USB_MAX_DEVICES; addr++) {
836 size_t dindex = usb_addr2dindex(addr);
837 if (bus->ub_devices[dindex] == NULL)
838 return addr;
839 }
840 return -1;
841 }
842
843 usbd_status
844 usbd_attach_roothub(device_t parent, struct usbd_device *dev)
845 {
846 struct usb_attach_arg uaa;
847 usb_device_descriptor_t *dd = &dev->ud_ddesc;
848 device_t dv;
849
850 uaa.uaa_device = dev;
851 uaa.uaa_usegeneric = 0;
852 uaa.uaa_port = 0;
853 uaa.uaa_vendor = UGETW(dd->idVendor);
854 uaa.uaa_product = UGETW(dd->idProduct);
855 uaa.uaa_release = UGETW(dd->bcdDevice);
856 uaa.uaa_class = dd->bDeviceClass;
857 uaa.uaa_subclass = dd->bDeviceSubClass;
858 uaa.uaa_proto = dd->bDeviceProtocol;
859
860 KERNEL_LOCK(1, curlwp);
861 dv = config_found_ia(parent, "usbroothubif", &uaa, 0);
862 KERNEL_UNLOCK_ONE(curlwp);
863 if (dv) {
864 dev->ud_subdevs = kmem_alloc(sizeof(dv), KM_SLEEP);
865 dev->ud_subdevs[0] = dv;
866 dev->ud_subdevlen = 1;
867 }
868 return USBD_NORMAL_COMPLETION;
869 }
870
871 static void
872 usbd_serialnumber(device_t dv, struct usbd_device *dev)
873 {
874 if (dev->ud_serial) {
875 prop_dictionary_set_cstring(device_properties(dv),
876 "serialnumber", dev->ud_serial);
877 }
878 }
879
880 static usbd_status
881 usbd_attachwholedevice(device_t parent, struct usbd_device *dev, int port,
882 int usegeneric)
883 {
884 struct usb_attach_arg uaa;
885 usb_device_descriptor_t *dd = &dev->ud_ddesc;
886 device_t dv;
887 int dlocs[USBDEVIFCF_NLOCS];
888
889 uaa.uaa_device = dev;
890 uaa.uaa_usegeneric = usegeneric;
891 uaa.uaa_port = port;
892 uaa.uaa_vendor = UGETW(dd->idVendor);
893 uaa.uaa_product = UGETW(dd->idProduct);
894 uaa.uaa_release = UGETW(dd->bcdDevice);
895 uaa.uaa_class = dd->bDeviceClass;
896 uaa.uaa_subclass = dd->bDeviceSubClass;
897 uaa.uaa_proto = dd->bDeviceProtocol;
898
899 dlocs[USBDEVIFCF_PORT] = uaa.uaa_port;
900 dlocs[USBDEVIFCF_VENDOR] = uaa.uaa_vendor;
901 dlocs[USBDEVIFCF_PRODUCT] = uaa.uaa_product;
902 dlocs[USBDEVIFCF_RELEASE] = uaa.uaa_release;
903 /* the rest is historical ballast */
904 dlocs[USBDEVIFCF_CONFIGURATION] = -1;
905 dlocs[USBDEVIFCF_INTERFACE] = -1;
906
907 KERNEL_LOCK(1, curlwp);
908 dv = config_found_sm_loc(parent, "usbdevif", dlocs, &uaa, usbd_print,
909 config_stdsubmatch);
910 KERNEL_UNLOCK_ONE(curlwp);
911 if (dv) {
912 dev->ud_subdevs = kmem_alloc(sizeof(dv), KM_SLEEP);
913 dev->ud_subdevs[0] = dv;
914 dev->ud_subdevlen = 1;
915 dev->ud_nifaces_claimed = 1; /* XXX */
916 usbd_serialnumber(dv, dev);
917 }
918 return USBD_NORMAL_COMPLETION;
919 }
920
921 static usbd_status
922 usbd_attachinterfaces(device_t parent, struct usbd_device *dev,
923 int port, const int *locators)
924 {
925 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
926 struct usbif_attach_arg uiaa;
927 int ilocs[USBIFIFCF_NLOCS];
928 usb_device_descriptor_t *dd = &dev->ud_ddesc;
929 int nifaces;
930 struct usbd_interface **ifaces;
931 int i, j, loc;
932 device_t dv;
933
934 nifaces = dev->ud_cdesc->bNumInterface;
935 ifaces = kmem_zalloc(nifaces * sizeof(*ifaces), KM_SLEEP);
936 for (i = 0; i < nifaces; i++) {
937 if (!dev->ud_subdevs[i]) {
938 ifaces[i] = &dev->ud_ifaces[i];
939 }
940 DPRINTF("interface %jd %#jx", i, (uintptr_t)ifaces[i], 0, 0);
941 }
942
943
944 uiaa.uiaa_device = dev;
945 uiaa.uiaa_port = port;
946 uiaa.uiaa_vendor = UGETW(dd->idVendor);
947 uiaa.uiaa_product = UGETW(dd->idProduct);
948 uiaa.uiaa_release = UGETW(dd->bcdDevice);
949 uiaa.uiaa_configno = dev->ud_cdesc->bConfigurationValue;
950 uiaa.uiaa_ifaces = ifaces;
951 uiaa.uiaa_nifaces = nifaces;
952 ilocs[USBIFIFCF_PORT] = uiaa.uiaa_port;
953 ilocs[USBIFIFCF_VENDOR] = uiaa.uiaa_vendor;
954 ilocs[USBIFIFCF_PRODUCT] = uiaa.uiaa_product;
955 ilocs[USBIFIFCF_RELEASE] = uiaa.uiaa_release;
956 ilocs[USBIFIFCF_CONFIGURATION] = uiaa.uiaa_configno;
957
958 for (i = 0; i < nifaces; i++) {
959 if (!ifaces[i]) {
960 DPRINTF("interface %jd claimed", i, 0, 0, 0);
961 continue; /* interface already claimed */
962 }
963 uiaa.uiaa_iface = ifaces[i];
964 uiaa.uiaa_class = ifaces[i]->ui_idesc->bInterfaceClass;
965 uiaa.uiaa_subclass = ifaces[i]->ui_idesc->bInterfaceSubClass;
966 uiaa.uiaa_proto = ifaces[i]->ui_idesc->bInterfaceProtocol;
967 uiaa.uiaa_ifaceno = ifaces[i]->ui_idesc->bInterfaceNumber;
968
969 DPRINTF("searching for interface %jd...", i, 0, 0, 0);
970 DPRINTF("class %jx subclass %jx proto %jx ifaceno %jd",
971 uiaa.uiaa_class, uiaa.uiaa_subclass, uiaa.uiaa_proto,
972 uiaa.uiaa_ifaceno);
973 ilocs[USBIFIFCF_INTERFACE] = uiaa.uiaa_ifaceno;
974 if (locators != NULL) {
975 loc = locators[USBIFIFCF_CONFIGURATION];
976 if (loc != USBIFIFCF_CONFIGURATION_DEFAULT &&
977 loc != uiaa.uiaa_configno)
978 continue;
979 loc = locators[USBIFIFCF_INTERFACE];
980 if (loc != USBIFIFCF_INTERFACE_DEFAULT &&
981 loc != uiaa.uiaa_ifaceno)
982 continue;
983 }
984 KERNEL_LOCK(1, curlwp);
985 dv = config_found_sm_loc(parent, "usbifif", ilocs, &uiaa,
986 usbd_ifprint, config_stdsubmatch);
987 KERNEL_UNLOCK_ONE(curlwp);
988 if (!dv)
989 continue;
990
991 usbd_serialnumber(dv, dev);
992
993 /* claim */
994 ifaces[i] = NULL;
995 /* account for ifaces claimed by the driver behind our back */
996 for (j = 0; j < nifaces; j++) {
997
998 if (!ifaces[j] && !dev->ud_subdevs[j]) {
999 DPRINTF("interface %jd claimed behind our back",
1000 j, 0, 0, 0);
1001 dev->ud_subdevs[j] = dv;
1002 dev->ud_nifaces_claimed++;
1003 }
1004 }
1005 }
1006
1007 kmem_free(ifaces, nifaces * sizeof(*ifaces));
1008 return USBD_NORMAL_COMPLETION;
1009 }
1010
1011 usbd_status
1012 usbd_probe_and_attach(device_t parent, struct usbd_device *dev,
1013 int port, int addr)
1014 {
1015 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
1016 usb_device_descriptor_t *dd = &dev->ud_ddesc;
1017 int confi, nifaces;
1018 usbd_status err;
1019
1020 /* First try with device specific drivers. */
1021 DPRINTF("trying device specific drivers", 0, 0, 0, 0);
1022 err = usbd_attachwholedevice(parent, dev, port, 0);
1023 if (dev->ud_nifaces_claimed || err)
1024 return err;
1025 DPRINTF("no device specific driver found", 0, 0, 0, 0);
1026
1027 DPRINTF("looping over %jd configurations", dd->bNumConfigurations,
1028 0, 0, 0);
1029 for (confi = 0; confi < dd->bNumConfigurations; confi++) {
1030 DPRINTFN(1, "trying config idx=%jd", confi, 0, 0, 0);
1031 err = usbd_set_config_index(dev, confi, 1);
1032 if (err) {
1033 DPRINTF("port %jd, set config at addr %jd failed, "
1034 "error=%d", port, addr, err, 0);
1035 printf("%s: port %d, set config at addr %d failed\n",
1036 device_xname(parent), port, addr);
1037 return err;
1038 }
1039 nifaces = dev->ud_cdesc->bNumInterface;
1040 dev->ud_subdevs = kmem_zalloc(nifaces * sizeof(device_t),
1041 KM_SLEEP);
1042 if (dev->ud_subdevs == NULL)
1043 return USBD_NOMEM;
1044 dev->ud_subdevlen = nifaces;
1045
1046 err = usbd_attachinterfaces(parent, dev, port, NULL);
1047
1048 if (!dev->ud_nifaces_claimed) {
1049 kmem_free(dev->ud_subdevs,
1050 dev->ud_subdevlen * sizeof(device_t));
1051 dev->ud_subdevs = 0;
1052 dev->ud_subdevlen = 0;
1053 }
1054 if (dev->ud_nifaces_claimed || err)
1055 return err;
1056 }
1057 /* No interfaces were attached in any of the configurations. */
1058
1059 if (dd->bNumConfigurations > 1) /* don't change if only 1 config */
1060 usbd_set_config_index(dev, 0, 0);
1061
1062 DPRINTF("no interface drivers found", 0, 0, 0, 0);
1063
1064 /* Finally try the generic driver. */
1065 err = usbd_attachwholedevice(parent, dev, port, 1);
1066
1067 /*
1068 * The generic attach failed, but leave the device as it is.
1069 * We just did not find any drivers, that's all. The device is
1070 * fully operational and not harming anyone.
1071 */
1072 DPRINTF("generic attach failed", 0, 0, 0, 0);
1073
1074 return USBD_NORMAL_COMPLETION;
1075 }
1076
1077 /**
1078 * Called from uhub_rescan(). usbd_new_device() for the target dev must be
1079 * called before calling this.
1080 */
1081 usbd_status
1082 usbd_reattach_device(device_t parent, struct usbd_device *dev,
1083 int port, const int *locators)
1084 {
1085 int i, loc;
1086
1087 if (locators != NULL) {
1088 loc = locators[USBIFIFCF_PORT];
1089 if (loc != USBIFIFCF_PORT_DEFAULT && loc != port)
1090 return USBD_NORMAL_COMPLETION;
1091 loc = locators[USBIFIFCF_VENDOR];
1092 if (loc != USBIFIFCF_VENDOR_DEFAULT &&
1093 loc != UGETW(dev->ud_ddesc.idVendor))
1094 return USBD_NORMAL_COMPLETION;
1095 loc = locators[USBIFIFCF_PRODUCT];
1096 if (loc != USBIFIFCF_PRODUCT_DEFAULT &&
1097 loc != UGETW(dev->ud_ddesc.idProduct))
1098 return USBD_NORMAL_COMPLETION;
1099 loc = locators[USBIFIFCF_RELEASE];
1100 if (loc != USBIFIFCF_RELEASE_DEFAULT &&
1101 loc != UGETW(dev->ud_ddesc.bcdDevice))
1102 return USBD_NORMAL_COMPLETION;
1103 }
1104 if (dev->ud_subdevlen == 0) {
1105 /* XXX: check USBIFIFCF_CONFIGURATION and
1106 * USBIFIFCF_INTERFACE too */
1107 return usbd_probe_and_attach(parent, dev, port, dev->ud_addr);
1108 } else if (dev->ud_subdevlen != dev->ud_cdesc->bNumInterface) {
1109 /* device-specific or generic driver is already attached. */
1110 return USBD_NORMAL_COMPLETION;
1111 }
1112 /* Does the device have unconfigured interfaces? */
1113 for (i = 0; i < dev->ud_subdevlen; i++) {
1114 if (dev->ud_subdevs[i] == NULL) {
1115 break;
1116 }
1117 }
1118 if (i >= dev->ud_subdevlen)
1119 return USBD_NORMAL_COMPLETION;
1120 return usbd_attachinterfaces(parent, dev, port, locators);
1121 }
1122
1123 /*
1124 * Get the first 8 bytes of the device descriptor.
1125 * Do as Windows does: try to read 64 bytes -- there are devices which
1126 * recognize the initial descriptor fetch (before the control endpoint's
1127 * MaxPacketSize is known by the host) by exactly this length.
1128 */
1129 usbd_status
1130 usbd_get_initial_ddesc(struct usbd_device *dev, usb_device_descriptor_t *desc)
1131 {
1132 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
1133 usb_device_request_t req;
1134 char buf[64];
1135 int res, actlen;
1136
1137 DPRINTFN(5, "dev %#jx", (uintptr_t)dev, 0, 0, 0);
1138
1139 req.bmRequestType = UT_READ_DEVICE;
1140 req.bRequest = UR_GET_DESCRIPTOR;
1141 USETW2(req.wValue, UDESC_DEVICE, 0);
1142 USETW(req.wIndex, 0);
1143 USETW(req.wLength, 64);
1144 res = usbd_do_request_flags(dev, &req, buf, USBD_SHORT_XFER_OK,
1145 &actlen, USBD_DEFAULT_TIMEOUT);
1146 if (res)
1147 return res;
1148 if (actlen < 8)
1149 return USBD_SHORT_XFER;
1150 memcpy(desc, buf, 8);
1151 return USBD_NORMAL_COMPLETION;
1152 }
1153
1154 /*
1155 * Called when a new device has been put in the powered state,
1156 * but not yet in the addressed state.
1157 * Get initial descriptor, set the address, get full descriptor,
1158 * and attach a driver.
1159 */
1160 usbd_status
1161 usbd_new_device(device_t parent, struct usbd_bus *bus, int depth, int speed,
1162 int port, struct usbd_port *up)
1163 {
1164 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
1165 struct usbd_device *dev, *adev;
1166 struct usbd_device *hub;
1167 usb_device_descriptor_t *dd;
1168 usb_port_status_t ps;
1169 usbd_status err;
1170 int addr;
1171 int i;
1172 int p;
1173
1174 DPRINTF("bus=%#jx port=%jd depth=%jd speed=%jd",
1175 (uintptr_t)bus, port, depth, speed);
1176
1177 if (bus->ub_methods->ubm_newdev != NULL)
1178 return (bus->ub_methods->ubm_newdev)(parent, bus, depth, speed,
1179 port, up);
1180
1181 addr = usbd_getnewaddr(bus);
1182 if (addr < 0) {
1183 printf("%s: No free USB addresses, new device ignored.\n",
1184 device_xname(bus->ub_usbctl));
1185 return USBD_NO_ADDR;
1186 }
1187
1188 dev = kmem_zalloc(sizeof(*dev), KM_SLEEP);
1189 dev->ud_bus = bus;
1190
1191 /* Set up default endpoint handle. */
1192 dev->ud_ep0.ue_edesc = &dev->ud_ep0desc;
1193
1194 /* Set up default endpoint descriptor. */
1195 dev->ud_ep0desc.bLength = USB_ENDPOINT_DESCRIPTOR_SIZE;
1196 dev->ud_ep0desc.bDescriptorType = UDESC_ENDPOINT;
1197 dev->ud_ep0desc.bEndpointAddress = USB_CONTROL_ENDPOINT;
1198 dev->ud_ep0desc.bmAttributes = UE_CONTROL;
1199 /*
1200 * temporary, will be fixed after first descriptor fetch
1201 * (which uses 64 bytes so it shouldn't be less),
1202 * highspeed devices must support 64 byte packets anyway
1203 */
1204 if (speed == USB_SPEED_HIGH || speed == USB_SPEED_FULL)
1205 USETW(dev->ud_ep0desc.wMaxPacketSize, 64);
1206 else
1207 USETW(dev->ud_ep0desc.wMaxPacketSize, USB_MAX_IPACKET);
1208
1209 dev->ud_ep0desc.bInterval = 0;
1210
1211 /* doesn't matter, just don't leave it uninitialized */
1212 dev->ud_ep0.ue_toggle = 0;
1213
1214 dev->ud_quirks = &usbd_no_quirk;
1215 dev->ud_addr = USB_START_ADDR;
1216 dev->ud_ddesc.bMaxPacketSize = 0;
1217 dev->ud_depth = depth;
1218 dev->ud_powersrc = up;
1219 dev->ud_myhub = up->up_parent;
1220
1221 up->up_dev = dev;
1222
1223 /* Locate port on upstream high speed hub */
1224 for (adev = dev, hub = up->up_parent;
1225 hub != NULL && hub->ud_speed != USB_SPEED_HIGH;
1226 adev = hub, hub = hub->ud_myhub)
1227 ;
1228 if (hub) {
1229 for (p = 0; p < hub->ud_hub->uh_hubdesc.bNbrPorts; p++) {
1230 if (hub->ud_hub->uh_ports[p].up_dev == adev) {
1231 dev->ud_myhsport = &hub->ud_hub->uh_ports[p];
1232 goto found;
1233 }
1234 }
1235 panic("usbd_new_device: cannot find HS port");
1236 found:
1237 DPRINTFN(1, "high speed port %jd", p, 0, 0, 0);
1238 } else {
1239 dev->ud_myhsport = NULL;
1240 }
1241 dev->ud_speed = speed;
1242 dev->ud_langid = USBD_NOLANG;
1243 dev->ud_cookie.cookie = ++usb_cookie_no;
1244
1245 /* Establish the default pipe. */
1246 err = usbd_setup_pipe_flags(dev, 0, &dev->ud_ep0, USBD_DEFAULT_INTERVAL,
1247 &dev->ud_pipe0, USBD_MPSAFE);
1248 if (err) {
1249 usbd_remove_device(dev, up);
1250 return err;
1251 }
1252
1253 dd = &dev->ud_ddesc;
1254 /* Try a few times in case the device is slow (i.e. outside specs.) */
1255 for (i = 0; i < 10; i++) {
1256 /* Get the first 8 bytes of the device descriptor. */
1257 err = usbd_get_initial_ddesc(dev, dd);
1258 if (!err)
1259 break;
1260 /*
1261 * The root hub can never fail to give the initial descriptor,
1262 * but assert it just in case.
1263 */
1264 KASSERT(up->up_parent);
1265 usbd_delay_ms(dev, 200);
1266 if ((i & 3) == 3)
1267 usbd_reset_port(up->up_parent, port, &ps);
1268 }
1269 if (err) {
1270 DPRINTF("addr=%jd, getting first desc failed: %jd", addr, err,
1271 0, 0);
1272 usbd_remove_device(dev, up);
1273 return err;
1274 }
1275
1276 /* Windows resets the port here, do likewise */
1277 if (up->up_parent)
1278 usbd_reset_port(up->up_parent, port, &ps);
1279
1280 if (speed == USB_SPEED_HIGH) {
1281 /* Max packet size must be 64 (sec 5.5.3). */
1282 if (dd->bMaxPacketSize != USB_2_MAX_CTRL_PACKET) {
1283 #ifdef DIAGNOSTIC
1284 printf("usbd_new_device: addr=%d bad max packet "
1285 "size=%d. adjusting to %d.\n",
1286 addr, dd->bMaxPacketSize, USB_2_MAX_CTRL_PACKET);
1287 #endif
1288 dd->bMaxPacketSize = USB_2_MAX_CTRL_PACKET;
1289 }
1290 }
1291
1292 DPRINTF("adding unit addr=%jd, rev=%02jx, class=%jd, subclass=%jd",
1293 addr, UGETW(dd->bcdUSB), dd->bDeviceClass, dd->bDeviceSubClass);
1294 DPRINTF("protocol=%jd, maxpacket=%jd, len=%jd, speed=%jd",
1295 dd->bDeviceProtocol, dd->bMaxPacketSize, dd->bLength, dev->ud_speed);
1296
1297 if (dd->bDescriptorType != UDESC_DEVICE) {
1298 /* Illegal device descriptor */
1299 DPRINTF("illegal descriptor %jd", dd->bDescriptorType, 0, 0, 0);
1300 usbd_remove_device(dev, up);
1301 return USBD_INVAL;
1302 }
1303
1304 if (dd->bLength < USB_DEVICE_DESCRIPTOR_SIZE) {
1305 DPRINTF("bad length %jd", dd->bLength, 0, 0, 0);
1306 usbd_remove_device(dev, up);
1307 return USBD_INVAL;
1308 }
1309
1310 USETW(dev->ud_ep0desc.wMaxPacketSize, dd->bMaxPacketSize);
1311
1312 /* Re-establish the default pipe with the new MPS. */
1313 usbd_kill_pipe(dev->ud_pipe0);
1314 err = usbd_setup_pipe_flags(dev, 0, &dev->ud_ep0, USBD_DEFAULT_INTERVAL,
1315 &dev->ud_pipe0, USBD_MPSAFE);
1316 if (err) {
1317 DPRINTF("setup default pipe failed err %jd", err, 0, 0, 0);
1318 usbd_remove_device(dev, up);
1319 return err;
1320 }
1321
1322 /* Set the address */
1323 DPRINTFN(5, "setting device address=%jd", addr, 0, 0, 0);
1324 err = usbd_set_address(dev, addr);
1325 if (err) {
1326 DPRINTF("set address %jd failed, err = %jd", addr, err, 0, 0);
1327 err = USBD_SET_ADDR_FAILED;
1328 usbd_remove_device(dev, up);
1329 return err;
1330 }
1331
1332 /* Allow device time to set new address */
1333 usbd_delay_ms(dev, USB_SET_ADDRESS_SETTLE);
1334 dev->ud_addr = addr; /* new device address now */
1335 bus->ub_devices[usb_addr2dindex(addr)] = dev;
1336
1337 /* Re-establish the default pipe with the new address. */
1338 usbd_kill_pipe(dev->ud_pipe0);
1339 err = usbd_setup_pipe_flags(dev, 0, &dev->ud_ep0, USBD_DEFAULT_INTERVAL,
1340 &dev->ud_pipe0, USBD_MPSAFE);
1341 if (err) {
1342 DPRINTF("setup default pipe failed, err = %jd", err, 0, 0, 0);
1343 usbd_remove_device(dev, up);
1344 return err;
1345 }
1346
1347 err = usbd_reload_device_desc(dev);
1348 if (err) {
1349 DPRINTF("addr=%jd, getting full desc failed, err = %jd", addr,
1350 err, 0, 0);
1351 usbd_remove_device(dev, up);
1352 return err;
1353 }
1354
1355 /* Assume 100mA bus powered for now. Changed when configured. */
1356 dev->ud_power = USB_MIN_POWER;
1357 dev->ud_selfpowered = 0;
1358
1359 DPRINTF("new dev (addr %jd), dev=%#jx, parent=%#jx",
1360 addr, (uintptr_t)dev, (uintptr_t)parent, 0);
1361
1362 usbd_get_device_strings(dev);
1363
1364 usbd_add_dev_event(USB_EVENT_DEVICE_ATTACH, dev);
1365
1366 if (port == 0) { /* root hub */
1367 KASSERT(addr == 1);
1368 usbd_attach_roothub(parent, dev);
1369 return USBD_NORMAL_COMPLETION;
1370 }
1371
1372 err = usbd_probe_and_attach(parent, dev, port, addr);
1373 if (err) {
1374 usbd_remove_device(dev, up);
1375 return err;
1376 }
1377
1378 return USBD_NORMAL_COMPLETION;
1379 }
1380
1381 usbd_status
1382 usbd_reload_device_desc(struct usbd_device *dev)
1383 {
1384 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
1385 usb_device_descriptor_t *udd = &dev->ud_ddesc;
1386 usbd_status err;
1387
1388 /* Get the full device descriptor. */
1389 err = usbd_get_device_desc(dev, udd);
1390 if (err)
1391 return err;
1392
1393 DPRINTFN(15, "bLength %5ju", udd->bLength, 0, 0, 0);
1394 DPRINTFN(15, "bDescriptorType %5ju", udd->bDescriptorType, 0, 0, 0);
1395 DPRINTFN(15, "bcdUSB %2jx.%02jx", udd->bcdUSB[1],
1396 udd->bcdUSB[0], 0, 0);
1397 DPRINTFN(15, "bDeviceClass %5ju", udd->bDeviceClass, 0, 0, 0);
1398 DPRINTFN(15, "bDeviceSubClass %5ju", udd->bDeviceSubClass, 0, 0, 0);
1399 DPRINTFN(15, "bDeviceProtocol %5ju", udd->bDeviceProtocol, 0, 0, 0);
1400 DPRINTFN(15, "bMaxPacketSize0 %5ju", udd->bMaxPacketSize, 0, 0, 0);
1401 DPRINTFN(15, "idVendor %#02jx %#02jx",
1402 udd->idVendor[0],
1403 udd->idVendor[1], 0, 0);
1404 DPRINTFN(15, "idProduct %#02jx %#02jx",
1405 udd->idProduct[0],
1406 udd->idProduct[1], 0, 0);
1407 DPRINTFN(15, "bcdDevice %2jx.%02jx", udd->bcdDevice[1],
1408 udd->bcdDevice[0], 0, 0);
1409 DPRINTFN(15, "iManufacturer %5ju", udd->iManufacturer, 0, 0, 0);
1410 DPRINTFN(15, "iProduct %5ju", udd->iProduct, 0, 0, 0);
1411 DPRINTFN(15, "iSerial %5ju", udd->iSerialNumber, 0, 0, 0);
1412 DPRINTFN(15, "bNumConfigurations %5ju", udd->bNumConfigurations, 0, 0,
1413 0);
1414
1415 /* Figure out what's wrong with this device. */
1416 dev->ud_quirks = usbd_find_quirk(udd);
1417
1418 return USBD_NORMAL_COMPLETION;
1419 }
1420
1421 void
1422 usbd_remove_device(struct usbd_device *dev, struct usbd_port *up)
1423 {
1424
1425 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
1426
1427 DPRINTF("dev %#jx up %#jx", (uintptr_t)dev, (uintptr_t)up, 0, 0);
1428
1429 if (dev->ud_pipe0 != NULL)
1430 usbd_kill_pipe(dev->ud_pipe0);
1431 up->up_dev = NULL;
1432 dev->ud_bus->ub_devices[usb_addr2dindex(dev->ud_addr)] = NULL;
1433
1434 kmem_free(dev, sizeof(*dev));
1435 }
1436
1437 int
1438 usbd_print(void *aux, const char *pnp)
1439 {
1440 struct usb_attach_arg *uaa = aux;
1441
1442 if (pnp) {
1443 #define USB_DEVINFO 1024
1444 char *devinfo;
1445 if (!uaa->uaa_usegeneric)
1446 return QUIET;
1447 devinfo = kmem_alloc(USB_DEVINFO, KM_SLEEP);
1448 usbd_devinfo(uaa->uaa_device, 1, devinfo, USB_DEVINFO);
1449 aprint_normal("%s, %s", devinfo, pnp);
1450 kmem_free(devinfo, USB_DEVINFO);
1451 }
1452 aprint_normal(" port %d", uaa->uaa_port);
1453 #if 0
1454 /*
1455 * It gets very crowded with these locators on the attach line.
1456 * They are not really needed since they are printed in the clear
1457 * by each driver.
1458 */
1459 if (uaa->uaa_vendor != UHUB_UNK_VENDOR)
1460 aprint_normal(" vendor %#04x", uaa->uaa_vendor);
1461 if (uaa->uaa_product != UHUB_UNK_PRODUCT)
1462 aprint_normal(" product %#04x", uaa->uaa_product);
1463 if (uaa->uaa_release != UHUB_UNK_RELEASE)
1464 aprint_normal(" release %#04x", uaa->uaa_release);
1465 #endif
1466 return UNCONF;
1467 }
1468
1469 int
1470 usbd_ifprint(void *aux, const char *pnp)
1471 {
1472 struct usbif_attach_arg *uiaa = aux;
1473
1474 if (pnp)
1475 return QUIET;
1476 aprint_normal(" port %d", uiaa->uiaa_port);
1477 aprint_normal(" configuration %d", uiaa->uiaa_configno);
1478 aprint_normal(" interface %d", uiaa->uiaa_ifaceno);
1479 #if 0
1480 /*
1481 * It gets very crowded with these locators on the attach line.
1482 * They are not really needed since they are printed in the clear
1483 * by each driver.
1484 */
1485 if (uaa->uaa_vendor != UHUB_UNK_VENDOR)
1486 aprint_normal(" vendor %#04x", uaa->uaa_vendor);
1487 if (uaa->uaa_product != UHUB_UNK_PRODUCT)
1488 aprint_normal(" product %#04x", uaa->uaa_product);
1489 if (uaa->uaa_release != UHUB_UNK_RELEASE)
1490 aprint_normal(" release %#04x", uaa->uaa_release);
1491 #endif
1492 return UNCONF;
1493 }
1494
1495 void
1496 usbd_fill_deviceinfo(struct usbd_device *dev, struct usb_device_info *di,
1497 int usedev)
1498 {
1499 struct usbd_port *p;
1500 int i, j, err;
1501
1502 di->udi_bus = device_unit(dev->ud_bus->ub_usbctl);
1503 di->udi_addr = dev->ud_addr;
1504 di->udi_cookie = dev->ud_cookie;
1505 usbd_devinfo_vp(dev, di->udi_vendor, sizeof(di->udi_vendor),
1506 di->udi_product, sizeof(di->udi_product), usedev, 1);
1507 usbd_printBCD(di->udi_release, sizeof(di->udi_release),
1508 UGETW(dev->ud_ddesc.bcdDevice));
1509 if (usedev) {
1510 usbd_status uerr = usbd_get_string(dev,
1511 dev->ud_ddesc.iSerialNumber, di->udi_serial);
1512 if (uerr != USBD_NORMAL_COMPLETION) {
1513 di->udi_serial[0] = '\0';
1514 } else {
1515 usbd_trim_spaces(di->udi_serial);
1516 }
1517 } else {
1518 di->udi_serial[0] = '\0';
1519 if (dev->ud_serial) {
1520 strlcpy(di->udi_serial, dev->ud_serial,
1521 sizeof(di->udi_serial));
1522 }
1523 }
1524
1525 di->udi_vendorNo = UGETW(dev->ud_ddesc.idVendor);
1526 di->udi_productNo = UGETW(dev->ud_ddesc.idProduct);
1527 di->udi_releaseNo = UGETW(dev->ud_ddesc.bcdDevice);
1528 di->udi_class = dev->ud_ddesc.bDeviceClass;
1529 di->udi_subclass = dev->ud_ddesc.bDeviceSubClass;
1530 di->udi_protocol = dev->ud_ddesc.bDeviceProtocol;
1531 di->udi_config = dev->ud_config;
1532 di->udi_power = dev->ud_selfpowered ? 0 : dev->ud_power;
1533 di->udi_speed = dev->ud_speed;
1534
1535 if (dev->ud_subdevlen > 0) {
1536 for (i = 0, j = 0; i < dev->ud_subdevlen &&
1537 j < USB_MAX_DEVNAMES; i++) {
1538 if (!dev->ud_subdevs[i])
1539 continue;
1540 strncpy(di->udi_devnames[j],
1541 device_xname(dev->ud_subdevs[i]), USB_MAX_DEVNAMELEN);
1542 di->udi_devnames[j][USB_MAX_DEVNAMELEN-1] = '\0';
1543 j++;
1544 }
1545 } else {
1546 j = 0;
1547 }
1548 for (/* j is set */; j < USB_MAX_DEVNAMES; j++)
1549 di->udi_devnames[j][0] = 0; /* empty */
1550
1551 if (!dev->ud_hub) {
1552 di->udi_nports = 0;
1553 return;
1554 }
1555
1556 const int nports = dev->ud_hub->uh_hubdesc.bNbrPorts;
1557 for (i = 0; i < __arraycount(di->udi_ports) && i < nports; i++) {
1558 p = &dev->ud_hub->uh_ports[i];
1559 if (p->up_dev)
1560 err = p->up_dev->ud_addr;
1561 else {
1562 const int s = UGETW(p->up_status.wPortStatus);
1563 const bool sshub_p = USB_IS_SS(dev->ud_speed);
1564 if (s & UPS_PORT_ENABLED)
1565 err = USB_PORT_ENABLED;
1566 else if (s & UPS_SUSPEND)
1567 err = USB_PORT_SUSPENDED;
1568 /*
1569 * Note: UPS_PORT_POWER_SS is available only
1570 * on 3.x, and UPS_PORT_POWER is available
1571 * only on 2.0 or 1.1.
1572 */
1573 else if (sshub_p && (s & UPS_PORT_POWER_SS))
1574 err = USB_PORT_POWERED;
1575 else if (!sshub_p && (s & UPS_PORT_POWER))
1576 err = USB_PORT_POWERED;
1577 else
1578 err = USB_PORT_DISABLED;
1579 }
1580 di->udi_ports[i] = err;
1581 }
1582 di->udi_nports = nports;
1583 }
1584
1585 void
1586 usb_free_device(struct usbd_device *dev)
1587 {
1588 int ifcidx, nifc;
1589
1590 if (dev->ud_pipe0 != NULL)
1591 usbd_kill_pipe(dev->ud_pipe0);
1592 if (dev->ud_ifaces != NULL) {
1593 nifc = dev->ud_cdesc->bNumInterface;
1594 for (ifcidx = 0; ifcidx < nifc; ifcidx++)
1595 usbd_free_iface_data(dev, ifcidx);
1596 kmem_free(dev->ud_ifaces,
1597 nifc * sizeof(struct usbd_interface));
1598 }
1599 if (dev->ud_cdesc != NULL)
1600 kmem_free(dev->ud_cdesc, UGETW(dev->ud_cdesc->wTotalLength));
1601 if (dev->ud_bdesc != NULL)
1602 kmem_free(dev->ud_bdesc, UGETW(dev->ud_bdesc->wTotalLength));
1603 if (dev->ud_subdevlen > 0) {
1604 kmem_free(dev->ud_subdevs,
1605 dev->ud_subdevlen * sizeof(device_t));
1606 dev->ud_subdevlen = 0;
1607 }
1608 if (dev->ud_vendor) {
1609 kmem_free(dev->ud_vendor, USB_MAX_ENCODED_STRING_LEN);
1610 }
1611 if (dev->ud_product) {
1612 kmem_free(dev->ud_product, USB_MAX_ENCODED_STRING_LEN);
1613 }
1614 if (dev->ud_serial) {
1615 kmem_free(dev->ud_serial, USB_MAX_ENCODED_STRING_LEN);
1616 }
1617 kmem_free(dev, sizeof(*dev));
1618 }
1619
1620 /*
1621 * The general mechanism for detaching drivers works as follows: Each
1622 * driver is responsible for maintaining a reference count on the
1623 * number of outstanding references to its softc (e.g. from
1624 * processing hanging in a read or write). The detach method of the
1625 * driver decrements this counter and flags in the softc that the
1626 * driver is dying and then wakes any sleepers. It then sleeps on the
1627 * softc. Each place that can sleep must maintain the reference
1628 * count. When the reference count drops to -1 (0 is the normal value
1629 * of the reference count) then a wakeup on the softc is performed
1630 * signaling to the detach waiter that all references are gone.
1631 */
1632
1633 /*
1634 * Called from process context when we discover that a port has
1635 * been disconnected.
1636 */
1637 int
1638 usb_disconnect_port(struct usbd_port *up, device_t parent, int flags)
1639 {
1640 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
1641 struct usbd_device *dev = up->up_dev;
1642 device_t subdev;
1643 char subdevname[16];
1644 const char *hubname = device_xname(parent);
1645 int i, rc;
1646
1647 DPRINTFN(3, "up=%#jx dev=%#jx port=%jd", (uintptr_t)up, (uintptr_t)dev,
1648 up->up_portno, 0);
1649
1650 if (dev == NULL) {
1651 return 0;
1652 }
1653
1654 if (dev->ud_subdevlen > 0) {
1655 DPRINTFN(3, "disconnect subdevs", 0, 0, 0, 0);
1656 for (i = 0; i < dev->ud_subdevlen; i++) {
1657 if ((subdev = dev->ud_subdevs[i]) == NULL)
1658 continue;
1659 strlcpy(subdevname, device_xname(subdev),
1660 sizeof(subdevname));
1661 KERNEL_LOCK(1, curlwp);
1662 rc = config_detach(subdev, flags);
1663 KERNEL_UNLOCK_ONE(curlwp);
1664 if (rc != 0)
1665 return rc;
1666 printf("%s: at %s", subdevname, hubname);
1667 if (up->up_portno != 0)
1668 printf(" port %d", up->up_portno);
1669 printf(" (addr %d) disconnected\n", dev->ud_addr);
1670 }
1671 KASSERT(!dev->ud_nifaces_claimed);
1672 }
1673
1674 mutex_enter(dev->ud_bus->ub_lock);
1675 dev->ud_bus->ub_devices[usb_addr2dindex(dev->ud_addr)] = NULL;
1676 up->up_dev = NULL;
1677 mutex_exit(dev->ud_bus->ub_lock);
1678
1679 usbd_add_dev_event(USB_EVENT_DEVICE_DETACH, dev);
1680
1681 usb_free_device(dev);
1682
1683 return 0;
1684 }
1685