usb_subr.c revision 1.248.2.1 1 /* $NetBSD: usb_subr.c,v 1.248.2.1 2021/04/03 22:28:50 thorpej Exp $ */
2 /* $FreeBSD: src/sys/dev/usb/usb_subr.c,v 1.18 1999/11/17 22:33:47 n_hibma Exp $ */
3
4 /*
5 * Copyright (c) 1998, 2004 The NetBSD Foundation, Inc.
6 * All rights reserved.
7 *
8 * This code is derived from software contributed to The NetBSD Foundation
9 * by Lennart Augustsson (lennart (at) augustsson.net) at
10 * Carlstedt Research & Technology.
11 *
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
14 * are met:
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions and the following disclaimer.
17 * 2. Redistributions in binary form must reproduce the above copyright
18 * notice, this list of conditions and the following disclaimer in the
19 * documentation and/or other materials provided with the distribution.
20 *
21 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
22 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
23 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
24 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
25 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
31 * POSSIBILITY OF SUCH DAMAGE.
32 */
33
34 #include <sys/cdefs.h>
35 __KERNEL_RCSID(0, "$NetBSD: usb_subr.c,v 1.248.2.1 2021/04/03 22:28:50 thorpej Exp $");
36
37 #ifdef _KERNEL_OPT
38 #include "opt_compat_netbsd.h"
39 #include "opt_usb.h"
40 #include "opt_usbverbose.h"
41 #endif
42
43 #include <sys/param.h>
44 #include <sys/systm.h>
45 #include <sys/kernel.h>
46 #include <sys/kmem.h>
47 #include <sys/device.h>
48 #include <sys/select.h>
49 #include <sys/proc.h>
50
51 #include <sys/bus.h>
52 #include <sys/module.h>
53
54 #include <dev/usb/usb.h>
55
56 #include <dev/usb/usbdi.h>
57 #include <dev/usb/usbdi_util.h>
58 #include <dev/usb/usbdivar.h>
59 #include <dev/usb/usbdevs.h>
60 #include <dev/usb/usb_quirks.h>
61 #include <dev/usb/usb_verbose.h>
62 #include <dev/usb/usbhist.h>
63
64 #include "locators.h"
65
66 #define DPRINTF(FMT,A,B,C,D) USBHIST_LOG(usbdebug,FMT,A,B,C,D)
67 #define DPRINTFN(N,FMT,A,B,C,D) USBHIST_LOGN(usbdebug,N,FMT,A,B,C,D)
68
69 Static void usbd_devinfo(struct usbd_device *, int, char *, size_t);
70 Static int usbd_getnewaddr(struct usbd_bus *);
71 Static int usbd_print(void *, const char *);
72 Static int usbd_ifprint(void *, const char *);
73 Static void usbd_free_iface_data(struct usbd_device *, int);
74
75 uint32_t usb_cookie_no = 0;
76
77 Static const char * const usbd_error_strs[] = {
78 "NORMAL_COMPLETION",
79 "IN_PROGRESS",
80 "PENDING_REQUESTS",
81 "NOT_STARTED",
82 "INVAL",
83 "NOMEM",
84 "CANCELLED",
85 "BAD_ADDRESS",
86 "IN_USE",
87 "NO_ADDR",
88 "SET_ADDR_FAILED",
89 "NO_POWER",
90 "TOO_DEEP",
91 "IOERROR",
92 "NOT_CONFIGURED",
93 "TIMEOUT",
94 "SHORT_XFER",
95 "STALLED",
96 "INTERRUPTED",
97 "XXX",
98 };
99
100 DEV_VERBOSE_DEFINE(usb);
101
102 const char *
103 usbd_errstr(usbd_status err)
104 {
105 static char buffer[5];
106
107 if (err < USBD_ERROR_MAX) {
108 return usbd_error_strs[err];
109 } else {
110 snprintf(buffer, sizeof(buffer), "%d", err);
111 return buffer;
112 }
113 }
114
115 static void
116 usbd_trim_spaces(char *p)
117 {
118 char *q, *e;
119
120 q = e = p;
121 while (*q == ' ') /* skip leading spaces */
122 q++;
123 while ((*p = *q++)) /* copy string */
124 if (*p++ != ' ') /* remember last non-space */
125 e = p;
126 *e = '\0'; /* kill trailing spaces */
127 }
128
129 static void
130 usbd_get_device_string(struct usbd_device *ud, uByte index, char **buf)
131 {
132 char *b;
133 usbd_status err;
134
135 b = kmem_alloc(USB_MAX_ENCODED_STRING_LEN, KM_SLEEP);
136 err = usbd_get_string0(ud, index, b, true);
137 if (err != USBD_NORMAL_COMPLETION) {
138 kmem_free(b, USB_MAX_ENCODED_STRING_LEN);
139 b = NULL;
140 } else {
141 usbd_trim_spaces(b);
142 }
143
144 *buf = b;
145 }
146
147 void
148 usbd_get_device_strings(struct usbd_device *ud)
149 {
150 usb_device_descriptor_t *udd = &ud->ud_ddesc;
151
152 usbd_get_device_string(ud, udd->iManufacturer, &ud->ud_vendor);
153 usbd_get_device_string(ud, udd->iProduct, &ud->ud_product);
154 usbd_get_device_string(ud, udd->iSerialNumber, &ud->ud_serial);
155 }
156
157
158 void
159 usbd_devinfo_vp(struct usbd_device *dev, char *v, size_t vl, char *p,
160 size_t pl, int usedev, int useencoded)
161 {
162 usb_device_descriptor_t *udd = &dev->ud_ddesc;
163 if (dev == NULL)
164 return;
165
166 v[0] = p[0] = '\0';
167
168 if (usedev) {
169 if (usbd_get_string0(dev, udd->iManufacturer, v, useencoded) ==
170 USBD_NORMAL_COMPLETION)
171 usbd_trim_spaces(v);
172 if (usbd_get_string0(dev, udd->iProduct, p, useencoded) ==
173 USBD_NORMAL_COMPLETION)
174 usbd_trim_spaces(p);
175 } else {
176 if (dev->ud_vendor) {
177 strlcpy(v, dev->ud_vendor, vl);
178 }
179 if (dev->ud_product) {
180 strlcpy(p, dev->ud_product, pl);
181 }
182 }
183 if (v[0] == '\0')
184 usb_findvendor(v, vl, UGETW(udd->idVendor));
185 if (p[0] == '\0')
186 usb_findproduct(p, pl, UGETW(udd->idVendor),
187 UGETW(udd->idProduct));
188 }
189
190 int
191 usbd_printBCD(char *cp, size_t l, int bcd)
192 {
193 return snprintf(cp, l, "%x.%02x", bcd >> 8, bcd & 0xff);
194 }
195
196 Static void
197 usbd_devinfo(struct usbd_device *dev, int showclass, char *cp, size_t l)
198 {
199 usb_device_descriptor_t *udd = &dev->ud_ddesc;
200 char *vendor, *product;
201 int bcdDevice, bcdUSB;
202 char *ep;
203
204 vendor = kmem_alloc(USB_MAX_ENCODED_STRING_LEN * 2, KM_SLEEP);
205 product = &vendor[USB_MAX_ENCODED_STRING_LEN];
206
207 ep = cp + l;
208
209 usbd_devinfo_vp(dev, vendor, USB_MAX_ENCODED_STRING_LEN,
210 product, USB_MAX_ENCODED_STRING_LEN, 0, 1);
211 cp += snprintf(cp, ep - cp, "%s (0x%04x) %s (0x%04x)", vendor,
212 UGETW(udd->idVendor), product, UGETW(udd->idProduct));
213 if (showclass)
214 cp += snprintf(cp, ep - cp, ", class %d/%d",
215 udd->bDeviceClass, udd->bDeviceSubClass);
216 bcdUSB = UGETW(udd->bcdUSB);
217 bcdDevice = UGETW(udd->bcdDevice);
218 cp += snprintf(cp, ep - cp, ", rev ");
219 cp += usbd_printBCD(cp, ep - cp, bcdUSB);
220 *cp++ = '/';
221 cp += usbd_printBCD(cp, ep - cp, bcdDevice);
222 cp += snprintf(cp, ep - cp, ", addr %d", dev->ud_addr);
223 *cp = 0;
224 kmem_free(vendor, USB_MAX_ENCODED_STRING_LEN * 2);
225 }
226
227 char *
228 usbd_devinfo_alloc(struct usbd_device *dev, int showclass)
229 {
230 char *devinfop;
231
232 devinfop = kmem_alloc(DEVINFOSIZE, KM_SLEEP);
233 usbd_devinfo(dev, showclass, devinfop, DEVINFOSIZE);
234 return devinfop;
235 }
236
237 void
238 usbd_devinfo_free(char *devinfop)
239 {
240 kmem_free(devinfop, DEVINFOSIZE);
241 }
242
243 /* Delay for a certain number of ms */
244 void
245 usb_delay_ms_locked(struct usbd_bus *bus, u_int ms, kmutex_t *lock)
246 {
247 /* Wait at least two clock ticks so we know the time has passed. */
248 if (bus->ub_usepolling || cold)
249 delay((ms+1) * 1000);
250 else
251 kpause("usbdly", false, (ms*hz+999)/1000 + 1, lock);
252 }
253
254 void
255 usb_delay_ms(struct usbd_bus *bus, u_int ms)
256 {
257 usb_delay_ms_locked(bus, ms, NULL);
258 }
259
260 /* Delay given a device handle. */
261 void
262 usbd_delay_ms_locked(struct usbd_device *dev, u_int ms, kmutex_t *lock)
263 {
264 usb_delay_ms_locked(dev->ud_bus, ms, lock);
265 }
266
267 /* Delay given a device handle. */
268 void
269 usbd_delay_ms(struct usbd_device *dev, u_int ms)
270 {
271 usb_delay_ms_locked(dev->ud_bus, ms, NULL);
272 }
273
274 usbd_status
275 usbd_reset_port(struct usbd_device *dev, int port, usb_port_status_t *ps)
276 {
277 USBHIST_FUNC(); USBHIST_CALLARGS(usbdebug, "port %jd", port, 0, 0, 0);
278 usb_device_request_t req;
279 usbd_status err;
280 int n;
281
282 req.bmRequestType = UT_WRITE_CLASS_OTHER;
283 req.bRequest = UR_SET_FEATURE;
284 USETW(req.wValue, UHF_PORT_RESET);
285 USETW(req.wIndex, port);
286 USETW(req.wLength, 0);
287 err = usbd_do_request(dev, &req, 0);
288 DPRINTFN(1, "port %jd reset done, error=%jd", port, err, 0, 0);
289 if (err)
290 return err;
291 n = 10;
292 do {
293 /* Wait for device to recover from reset. */
294 usbd_delay_ms(dev, USB_PORT_RESET_DELAY);
295 err = usbd_get_port_status(dev, port, ps);
296 if (err) {
297 DPRINTF("get status failed %jd", err, 0, 0, 0);
298 return err;
299 }
300 /* If the device disappeared, just give up. */
301 if (!(UGETW(ps->wPortStatus) & UPS_CURRENT_CONNECT_STATUS))
302 return USBD_NORMAL_COMPLETION;
303 } while ((UGETW(ps->wPortChange) & UPS_C_PORT_RESET) == 0 && --n > 0);
304 if (n == 0)
305 return USBD_TIMEOUT;
306 err = usbd_clear_port_feature(dev, port, UHF_C_PORT_RESET);
307 #ifdef USB_DEBUG
308 if (err)
309 DPRINTF("clear port feature failed %jd", err, 0, 0, 0);
310 #endif
311
312 /* Wait for the device to recover from reset. */
313 usbd_delay_ms(dev, USB_PORT_RESET_RECOVERY);
314 return err;
315 }
316
317 usb_interface_descriptor_t *
318 usbd_find_idesc(usb_config_descriptor_t *cd, int ifaceidx, int altidx)
319 {
320 USBHIST_FUNC();
321 USBHIST_CALLARGS(usbdebug, "iface/alt idx %jd/%jd",
322 ifaceidx, altidx, 0, 0);
323 char *p = (char *)cd;
324 char *end = p + UGETW(cd->wTotalLength);
325 usb_descriptor_t *desc;
326 usb_interface_descriptor_t *idesc;
327 int curidx, lastidx, curaidx = 0;
328
329 for (curidx = lastidx = -1; p < end; ) {
330 desc = (usb_descriptor_t *)p;
331
332 DPRINTFN(4, "idx=%jd(%jd) altidx=%jd(%jd)", ifaceidx, curidx,
333 altidx, curaidx);
334 DPRINTFN(4, "len=%jd type=%jd", desc->bLength,
335 desc->bDescriptorType, 0, 0);
336
337 if (desc->bLength < USB_DESCRIPTOR_SIZE)
338 break;
339 p += desc->bLength;
340 if (p > end)
341 break;
342
343 if (desc->bDescriptorType != UDESC_INTERFACE)
344 continue;
345 idesc = (usb_interface_descriptor_t *)desc;
346 if (idesc->bLength < USB_INTERFACE_DESCRIPTOR_SIZE)
347 break;
348
349 if (idesc->bInterfaceNumber != lastidx) {
350 lastidx = idesc->bInterfaceNumber;
351 curidx++;
352 curaidx = 0;
353 } else {
354 curaidx++;
355 }
356 if (ifaceidx == curidx && altidx == curaidx)
357 return idesc;
358 }
359
360 return NULL;
361 }
362
363 usb_endpoint_descriptor_t *
364 usbd_find_edesc(usb_config_descriptor_t *cd, int ifaceidx, int altidx,
365 int endptidx)
366 {
367 char *p = (char *)cd;
368 char *end = p + UGETW(cd->wTotalLength);
369 usb_interface_descriptor_t *idesc;
370 usb_endpoint_descriptor_t *edesc;
371 usb_descriptor_t *desc;
372 int curidx;
373
374 idesc = usbd_find_idesc(cd, ifaceidx, altidx);
375 if (idesc == NULL)
376 return NULL;
377 if (endptidx >= idesc->bNumEndpoints) /* quick exit */
378 return NULL;
379
380 curidx = -1;
381 for (p = (char *)idesc + idesc->bLength; p < end; ) {
382 desc = (usb_descriptor_t *)p;
383
384 if (desc->bLength < USB_DESCRIPTOR_SIZE)
385 break;
386 p += desc->bLength;
387 if (p > end)
388 break;
389
390 if (desc->bDescriptorType == UDESC_INTERFACE)
391 break;
392 if (desc->bDescriptorType != UDESC_ENDPOINT)
393 continue;
394
395 edesc = (usb_endpoint_descriptor_t *)desc;
396 if (edesc->bLength < USB_ENDPOINT_DESCRIPTOR_SIZE)
397 break;
398
399 curidx++;
400 if (curidx == endptidx)
401 return edesc;
402 }
403 return NULL;
404 }
405
406 usbd_status
407 usbd_fill_iface_data(struct usbd_device *dev, int ifaceidx, int altidx)
408 {
409 USBHIST_FUNC();
410 USBHIST_CALLARGS(usbdebug, "ifaceidx=%jd altidx=%jd",
411 ifaceidx, altidx, 0, 0);
412 struct usbd_interface *ifc = &dev->ud_ifaces[ifaceidx];
413 usb_interface_descriptor_t *idesc;
414 char *p, *end;
415 int endpt, nendpt;
416
417 idesc = usbd_find_idesc(dev->ud_cdesc, ifaceidx, altidx);
418 if (idesc == NULL)
419 return USBD_INVAL;
420 ifc->ui_dev = dev;
421 ifc->ui_idesc = idesc;
422 ifc->ui_index = ifaceidx;
423 ifc->ui_altindex = altidx;
424 nendpt = ifc->ui_idesc->bNumEndpoints;
425 DPRINTFN(4, "found idesc nendpt=%jd", nendpt, 0, 0, 0);
426 if (nendpt != 0) {
427 ifc->ui_endpoints = kmem_alloc(nendpt * sizeof(struct usbd_endpoint),
428 KM_SLEEP);
429 } else
430 ifc->ui_endpoints = NULL;
431 ifc->ui_priv = NULL;
432 p = (char *)ifc->ui_idesc + ifc->ui_idesc->bLength;
433 end = (char *)dev->ud_cdesc + UGETW(dev->ud_cdesc->wTotalLength);
434 #define ed ((usb_endpoint_descriptor_t *)p)
435 for (endpt = 0; endpt < nendpt; endpt++) {
436 DPRINTFN(10, "endpt=%jd", endpt, 0, 0, 0);
437 for (; p < end; p += ed->bLength) {
438 DPRINTFN(10, "p=%#jx end=%#jx len=%jd type=%jd",
439 (uintptr_t)p, (uintptr_t)end, ed->bLength,
440 ed->bDescriptorType);
441 if (p + ed->bLength <= end &&
442 ed->bLength >= USB_ENDPOINT_DESCRIPTOR_SIZE &&
443 ed->bDescriptorType == UDESC_ENDPOINT)
444 goto found;
445 if (ed->bLength == 0 ||
446 ed->bDescriptorType == UDESC_INTERFACE)
447 break;
448 }
449 /* passed end, or bad desc */
450 if (p < end) {
451 if (ed->bLength == 0) {
452 printf("%s: bad descriptor: 0 length\n",
453 __func__);
454 } else {
455 printf("%s: bad descriptor: iface desc\n",
456 __func__);
457 }
458 } else {
459 printf("%s: no desc found\n", __func__);
460 }
461 goto bad;
462 found:
463 ifc->ui_endpoints[endpt].ue_edesc = ed;
464 if (dev->ud_speed == USB_SPEED_HIGH) {
465 u_int mps;
466 /* Control and bulk endpoints have max packet limits. */
467 switch (UE_GET_XFERTYPE(ed->bmAttributes)) {
468 case UE_CONTROL:
469 mps = USB_2_MAX_CTRL_PACKET;
470 goto check;
471 case UE_BULK:
472 mps = USB_2_MAX_BULK_PACKET;
473 check:
474 if (UGETW(ed->wMaxPacketSize) != mps) {
475 USETW(ed->wMaxPacketSize, mps);
476 #ifdef DIAGNOSTIC
477 printf("usbd_fill_iface_data: bad max "
478 "packet size\n");
479 #endif
480 }
481 break;
482 default:
483 break;
484 }
485 }
486 ifc->ui_endpoints[endpt].ue_refcnt = 0;
487 ifc->ui_endpoints[endpt].ue_toggle = 0;
488 p += ed->bLength;
489 }
490 #undef ed
491 LIST_INIT(&ifc->ui_pipes);
492 return USBD_NORMAL_COMPLETION;
493
494 bad:
495 if (ifc->ui_endpoints != NULL) {
496 kmem_free(ifc->ui_endpoints, nendpt * sizeof(struct usbd_endpoint));
497 ifc->ui_endpoints = NULL;
498 }
499 return USBD_INVAL;
500 }
501
502 void
503 usbd_free_iface_data(struct usbd_device *dev, int ifcno)
504 {
505 struct usbd_interface *ifc = &dev->ud_ifaces[ifcno];
506 if (ifc->ui_endpoints) {
507 int nendpt = ifc->ui_idesc->bNumEndpoints;
508 size_t sz = nendpt * sizeof(struct usbd_endpoint);
509 kmem_free(ifc->ui_endpoints, sz);
510 ifc->ui_endpoints = NULL;
511 }
512 }
513
514 usbd_status
515 usbd_set_config_no(struct usbd_device *dev, int no, int msg)
516 {
517 USBHIST_FUNC(); USBHIST_CALLARGS(usbdebug, "%jd", no, 0, 0, 0);
518 usb_config_descriptor_t cd;
519 usbd_status err;
520 int index;
521
522 if (no == USB_UNCONFIG_NO)
523 return usbd_set_config_index(dev, USB_UNCONFIG_INDEX, msg);
524
525 /* Figure out what config index to use. */
526 for (index = 0; index < dev->ud_ddesc.bNumConfigurations; index++) {
527 err = usbd_get_config_desc(dev, index, &cd);
528 if (err)
529 return err;
530 if (cd.bConfigurationValue == no)
531 return usbd_set_config_index(dev, index, msg);
532 }
533 return USBD_INVAL;
534 }
535
536 usbd_status
537 usbd_set_config_index(struct usbd_device *dev, int index, int msg)
538 {
539 USBHIST_FUNC();
540 USBHIST_CALLARGS(usbdebug, "dev=%#jx index=%jd",
541 (uintptr_t)dev, index, 0, 0);
542 usb_config_descriptor_t cd, *cdp;
543 usb_bos_descriptor_t *bdp = NULL;
544 usbd_status err;
545 int i, ifcidx, nifc, len, selfpowered, power;
546
547
548 if (index >= dev->ud_ddesc.bNumConfigurations &&
549 index != USB_UNCONFIG_INDEX) {
550 /* panic? */
551 printf("usbd_set_config_index: illegal index\n");
552 return USBD_INVAL;
553 }
554
555 /* XXX check that all interfaces are idle */
556 if (dev->ud_config != USB_UNCONFIG_NO) {
557 DPRINTF("free old config", 0, 0, 0, 0);
558 /* Free all configuration data structures. */
559 nifc = dev->ud_cdesc->bNumInterface;
560 for (ifcidx = 0; ifcidx < nifc; ifcidx++)
561 usbd_free_iface_data(dev, ifcidx);
562 kmem_free(dev->ud_ifaces, nifc * sizeof(struct usbd_interface));
563 kmem_free(dev->ud_cdesc, UGETW(dev->ud_cdesc->wTotalLength));
564 if (dev->ud_bdesc != NULL)
565 kmem_free(dev->ud_bdesc,
566 UGETW(dev->ud_bdesc->wTotalLength));
567 dev->ud_ifaces = NULL;
568 dev->ud_cdesc = NULL;
569 dev->ud_bdesc = NULL;
570 dev->ud_config = USB_UNCONFIG_NO;
571 }
572
573 if (index == USB_UNCONFIG_INDEX) {
574 /* We are unconfiguring the device, so leave unallocated. */
575 DPRINTF("set config 0", 0, 0, 0, 0);
576 err = usbd_set_config(dev, USB_UNCONFIG_NO);
577 if (err) {
578 DPRINTF("setting config=0 failed, err = %jd", err,
579 0, 0, 0);
580 }
581 return err;
582 }
583
584 /* Get the short descriptor. */
585 err = usbd_get_config_desc(dev, index, &cd);
586 if (err) {
587 DPRINTF("get_config_desc=%jd", err, 0, 0, 0);
588 return err;
589 }
590 len = UGETW(cd.wTotalLength);
591 if (len < USB_CONFIG_DESCRIPTOR_SIZE) {
592 DPRINTF("empty short descriptor", 0, 0, 0, 0);
593 return USBD_INVAL;
594 }
595 cdp = kmem_alloc(len, KM_SLEEP);
596
597 /* Get the full descriptor. Try a few times for slow devices. */
598 for (i = 0; i < 3; i++) {
599 err = usbd_get_desc(dev, UDESC_CONFIG, index, len, cdp);
600 if (!err)
601 break;
602 usbd_delay_ms(dev, 200);
603 }
604 if (err) {
605 DPRINTF("get_desc=%jd", err, 0, 0, 0);
606 goto bad;
607 }
608 if (cdp->bDescriptorType != UDESC_CONFIG) {
609 DPRINTF("bad desc %jd", cdp->bDescriptorType, 0, 0, 0);
610 err = USBD_INVAL;
611 goto bad;
612 }
613 if (UGETW(cdp->wTotalLength) != UGETW(cd.wTotalLength)) {
614 DPRINTF("bad len %jd", UGETW(cdp->wTotalLength), 0, 0, 0);
615 err = USBD_INVAL;
616 goto bad;
617 }
618
619 if (USB_IS_SS(dev->ud_speed)) {
620 usb_bos_descriptor_t bd;
621
622 /* get short bos desc */
623 err = usbd_get_bos_desc(dev, index, &bd);
624 if (!err) {
625 int blen = UGETW(bd.wTotalLength);
626 if (blen < USB_BOS_DESCRIPTOR_SIZE) {
627 DPRINTF("empty bos descriptor", 0, 0, 0, 0);
628 err = USBD_INVAL;
629 goto bad;
630 }
631 bdp = kmem_alloc(blen, KM_SLEEP);
632
633 /* Get the full desc */
634 for (i = 0; i < 3; i++) {
635 err = usbd_get_desc(dev, UDESC_BOS, index, blen,
636 bdp);
637 if (!err)
638 break;
639 usbd_delay_ms(dev, 200);
640 }
641 if (err || bdp->bDescriptorType != UDESC_BOS ||
642 UGETW(bdp->wTotalLength) != UGETW(bd.wTotalLength)) {
643 DPRINTF("error %jd or bad desc %jd", err,
644 bdp->bDescriptorType, 0, 0);
645 kmem_free(bdp, blen);
646 bdp = NULL;
647 }
648 }
649 }
650 dev->ud_bdesc = bdp;
651
652 /*
653 * Figure out if the device is self or bus powered.
654 */
655 #if 0 /* XXX various devices don't report the power state correctly */
656 selfpowered = 0;
657 err = usbd_get_device_status(dev, &ds);
658 if (!err && (UGETW(ds.wStatus) & UDS_SELF_POWERED))
659 selfpowered = 1;
660 #endif
661 /*
662 * Use the power state in the configuration we are going
663 * to set. This doesn't necessarily reflect the actual
664 * power state of the device; the driver can control this
665 * by choosing the appropriate configuration.
666 */
667 selfpowered = !!(cdp->bmAttributes & UC_SELF_POWERED);
668
669 DPRINTF("addr %jd cno=%jd attr=0x%02jx, selfpowered=%jd",
670 dev->ud_addr, cdp->bConfigurationValue, cdp->bmAttributes,
671 selfpowered);
672 DPRINTF("max power=%jd", cdp->bMaxPower * 2, 0, 0, 0);
673
674 /* Check if we have enough power. */
675 #if 0 /* this is a no-op, see above */
676 if ((cdp->bmAttributes & UC_SELF_POWERED) && !selfpowered) {
677 if (msg)
678 printf("%s: device addr %d (config %d): "
679 "can't set self powered configuration\n",
680 device_xname(dev->ud_bus->bdev), dev->ud_addr,
681 cdp->bConfigurationValue);
682 err = USBD_NO_POWER;
683 goto bad;
684 }
685 #endif
686 #ifdef USB_DEBUG
687 if (dev->ud_powersrc == NULL) {
688 DPRINTF("No power source?", 0, 0, 0, 0);
689 err = USBD_IOERROR;
690 goto bad;
691 }
692 #endif
693 power = cdp->bMaxPower * 2;
694 if (power > dev->ud_powersrc->up_power) {
695 DPRINTF("power exceeded %jd %jd", power,
696 dev->ud_powersrc->up_power, 0, 0);
697 /* XXX print nicer message. */
698 if (msg)
699 printf("%s: device addr %d (config %d) exceeds power "
700 "budget, %d mA > %d mA\n",
701 device_xname(dev->ud_bus->ub_usbctl), dev->ud_addr,
702 cdp->bConfigurationValue,
703 power, dev->ud_powersrc->up_power);
704 err = USBD_NO_POWER;
705 goto bad;
706 }
707 dev->ud_power = power;
708 dev->ud_selfpowered = selfpowered;
709
710 /* Set the actual configuration value. */
711 DPRINTF("set config %jd", cdp->bConfigurationValue, 0, 0, 0);
712 err = usbd_set_config(dev, cdp->bConfigurationValue);
713 if (err) {
714 DPRINTF("setting config=%jd failed, error=%jd",
715 cdp->bConfigurationValue, err, 0, 0);
716 goto bad;
717 }
718
719 /* Allocate and fill interface data. */
720 nifc = cdp->bNumInterface;
721 if (nifc == 0) {
722 DPRINTF("no interfaces", 0, 0, 0, 0);
723 err = USBD_INVAL;
724 goto bad;
725 }
726 dev->ud_ifaces = kmem_alloc(nifc * sizeof(struct usbd_interface),
727 KM_SLEEP);
728 DPRINTFN(5, "dev=%#jx cdesc=%#jx", (uintptr_t)dev, (uintptr_t)cdp,
729 0, 0);
730 dev->ud_cdesc = cdp;
731 dev->ud_config = cdp->bConfigurationValue;
732 for (ifcidx = 0; ifcidx < nifc; ifcidx++) {
733 err = usbd_fill_iface_data(dev, ifcidx, 0);
734 if (err) {
735 while (--ifcidx >= 0)
736 usbd_free_iface_data(dev, ifcidx);
737 kmem_free(dev->ud_ifaces,
738 nifc * sizeof(struct usbd_interface));
739 dev->ud_ifaces = NULL;
740 goto bad;
741 }
742 }
743
744 return USBD_NORMAL_COMPLETION;
745
746 bad:
747 /* XXX Use usbd_set_config() to reset the config? */
748 /* XXX Should we forbid USB_UNCONFIG_NO from bConfigurationValue? */
749 dev->ud_config = USB_UNCONFIG_NO;
750 kmem_free(cdp, len);
751 dev->ud_cdesc = NULL;
752 if (bdp != NULL) {
753 kmem_free(bdp, UGETW(bdp->wTotalLength));
754 dev->ud_bdesc = NULL;
755 }
756 return err;
757 }
758
759 /* XXX add function for alternate settings */
760
761 usbd_status
762 usbd_setup_pipe(struct usbd_device *dev, struct usbd_interface *iface,
763 struct usbd_endpoint *ep, int ival, struct usbd_pipe **pipe)
764 {
765 return usbd_setup_pipe_flags(dev, iface, ep, ival, pipe, 0);
766 }
767
768 usbd_status
769 usbd_setup_pipe_flags(struct usbd_device *dev, struct usbd_interface *iface,
770 struct usbd_endpoint *ep, int ival, struct usbd_pipe **pipe, uint8_t flags)
771 {
772 USBHIST_FUNC();
773 USBHIST_CALLARGS(usbdebug, "dev=%#jx addr=%jd iface=%#jx ep=%#jx",
774 (uintptr_t)dev, dev->ud_addr, (uintptr_t)iface, (uintptr_t)ep);
775 struct usbd_pipe *p;
776 usbd_status err;
777
778 p = kmem_alloc(dev->ud_bus->ub_pipesize, KM_SLEEP);
779 DPRINTFN(1, "pipe=%#jx", (uintptr_t)p, 0, 0, 0);
780 p->up_dev = dev;
781 p->up_iface = iface;
782 p->up_endpoint = ep;
783 ep->ue_refcnt++;
784 p->up_intrxfer = NULL;
785 p->up_running = 0;
786 p->up_aborting = 0;
787 p->up_serialise = true;
788 p->up_repeat = 0;
789 p->up_interval = ival;
790 p->up_flags = flags;
791 SIMPLEQ_INIT(&p->up_queue);
792 err = dev->ud_bus->ub_methods->ubm_open(p);
793 if (err) {
794 DPRINTF("endpoint=%#jx failed, error=%jd",
795 (uintptr_t)ep->ue_edesc->bEndpointAddress, err, 0, 0);
796 kmem_free(p, dev->ud_bus->ub_pipesize);
797 return err;
798 }
799
800 KASSERT(p->up_methods->upm_start || p->up_serialise == false);
801
802 usb_init_task(&p->up_async_task, usbd_clear_endpoint_stall_task, p,
803 USB_TASKQ_MPSAFE);
804 DPRINTFN(1, "pipe=%#jx", (uintptr_t)p, 0, 0, 0);
805 *pipe = p;
806 return USBD_NORMAL_COMPLETION;
807 }
808
809 /* Abort the device control pipe. */
810 void
811 usbd_kill_pipe(struct usbd_pipe *pipe)
812 {
813 usbd_abort_pipe(pipe);
814 usbd_lock_pipe(pipe);
815 pipe->up_methods->upm_close(pipe);
816 usbd_unlock_pipe(pipe);
817 usb_rem_task_wait(pipe->up_dev, &pipe->up_async_task, USB_TASKQ_DRIVER,
818 NULL);
819 pipe->up_endpoint->ue_refcnt--;
820 kmem_free(pipe, pipe->up_dev->ud_bus->ub_pipesize);
821 }
822
823 int
824 usbd_getnewaddr(struct usbd_bus *bus)
825 {
826 int addr;
827
828 for (addr = 1; addr < USB_MAX_DEVICES; addr++) {
829 size_t dindex = usb_addr2dindex(addr);
830 if (bus->ub_devices[dindex] == NULL)
831 return addr;
832 }
833 return -1;
834 }
835
836 usbd_status
837 usbd_attach_roothub(device_t parent, struct usbd_device *dev)
838 {
839 struct usb_attach_arg uaa;
840 usb_device_descriptor_t *dd = &dev->ud_ddesc;
841 device_t dv;
842
843 uaa.uaa_device = dev;
844 uaa.uaa_usegeneric = 0;
845 uaa.uaa_port = 0;
846 uaa.uaa_vendor = UGETW(dd->idVendor);
847 uaa.uaa_product = UGETW(dd->idProduct);
848 uaa.uaa_release = UGETW(dd->bcdDevice);
849 uaa.uaa_class = dd->bDeviceClass;
850 uaa.uaa_subclass = dd->bDeviceSubClass;
851 uaa.uaa_proto = dd->bDeviceProtocol;
852
853 KERNEL_LOCK(1, curlwp);
854 dv = config_found_ia(parent, "usbroothubif", &uaa, 0);
855 KERNEL_UNLOCK_ONE(curlwp);
856 if (dv) {
857 dev->ud_subdevs = kmem_alloc(sizeof(dv), KM_SLEEP);
858 dev->ud_subdevs[0] = dv;
859 dev->ud_subdevlen = 1;
860 }
861 return USBD_NORMAL_COMPLETION;
862 }
863
864 static void
865 usbd_properties(device_t dv, struct usbd_device *dev)
866 {
867 usb_device_descriptor_t *dd = &dev->ud_ddesc;
868 prop_dictionary_t dict = device_properties(dv);
869 int class, subclass, release, proto, vendor, product;
870
871 class = dd->bDeviceClass;
872 subclass = dd->bDeviceSubClass;
873 release = UGETW(dd->bcdDevice);
874 proto = dd->bDeviceProtocol;
875 vendor = UGETW(dd->idVendor);
876 product = UGETW(dd->idProduct);
877
878 prop_dictionary_set_uint16(dict, "class", class);
879 prop_dictionary_set_uint16(dict, "subclass", subclass);
880 prop_dictionary_set_uint16(dict, "release", release);
881 prop_dictionary_set_uint16(dict, "proto", proto);
882 prop_dictionary_set_uint16(dict, "vendor", vendor);
883 prop_dictionary_set_uint16(dict, "product", product);
884
885 if (dev->ud_vendor) {
886 prop_dictionary_set_string(dict,
887 "vendor-string", dev->ud_vendor);
888 }
889 if (dev->ud_product) {
890 prop_dictionary_set_string(dict,
891 "product-string", dev->ud_product);
892 }
893 if (dev->ud_serial) {
894 prop_dictionary_set_string(dict,
895 "serialnumber", dev->ud_serial);
896 }
897 }
898
899 static usbd_status
900 usbd_attachwholedevice(device_t parent, struct usbd_device *dev, int port,
901 int usegeneric)
902 {
903 struct usb_attach_arg uaa;
904 usb_device_descriptor_t *dd = &dev->ud_ddesc;
905 device_t dv;
906 int dlocs[USBDEVIFCF_NLOCS];
907
908 uaa.uaa_device = dev;
909 uaa.uaa_usegeneric = usegeneric;
910 uaa.uaa_port = port;
911 uaa.uaa_vendor = UGETW(dd->idVendor);
912 uaa.uaa_product = UGETW(dd->idProduct);
913 uaa.uaa_release = UGETW(dd->bcdDevice);
914 uaa.uaa_class = dd->bDeviceClass;
915 uaa.uaa_subclass = dd->bDeviceSubClass;
916 uaa.uaa_proto = dd->bDeviceProtocol;
917
918 dlocs[USBDEVIFCF_PORT] = uaa.uaa_port;
919 dlocs[USBDEVIFCF_VENDOR] = uaa.uaa_vendor;
920 dlocs[USBDEVIFCF_PRODUCT] = uaa.uaa_product;
921 dlocs[USBDEVIFCF_RELEASE] = uaa.uaa_release;
922 /* the rest is historical ballast */
923 dlocs[USBDEVIFCF_CONFIGURATION] = -1;
924 dlocs[USBDEVIFCF_INTERFACE] = -1;
925
926 KERNEL_LOCK(1, curlwp);
927 config_pending_incr(parent);
928 dv = config_found_sm_loc(parent, "usbdevif", dlocs, &uaa, usbd_print,
929 config_stdsubmatch);
930 KERNEL_UNLOCK_ONE(curlwp);
931 if (dv) {
932 dev->ud_subdevs = kmem_alloc(sizeof(dv), KM_SLEEP);
933 dev->ud_subdevs[0] = dv;
934 dev->ud_subdevlen = 1;
935 dev->ud_nifaces_claimed = 1; /* XXX */
936 usbd_properties(dv, dev);
937 }
938 config_pending_decr(parent);
939 return USBD_NORMAL_COMPLETION;
940 }
941
942 static usbd_status
943 usbd_attachinterfaces(device_t parent, struct usbd_device *dev,
944 int port, const int *locators)
945 {
946 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
947 struct usbif_attach_arg uiaa;
948 int ilocs[USBIFIFCF_NLOCS];
949 usb_device_descriptor_t *dd = &dev->ud_ddesc;
950 int nifaces;
951 struct usbd_interface **ifaces;
952 int i, j, loc;
953 device_t dv;
954
955 nifaces = dev->ud_cdesc->bNumInterface;
956 ifaces = kmem_zalloc(nifaces * sizeof(*ifaces), KM_SLEEP);
957 for (i = 0; i < nifaces; i++) {
958 if (!dev->ud_subdevs[i]) {
959 ifaces[i] = &dev->ud_ifaces[i];
960 }
961 DPRINTF("interface %jd %#jx", i, (uintptr_t)ifaces[i], 0, 0);
962 }
963
964
965 uiaa.uiaa_device = dev;
966 uiaa.uiaa_port = port;
967 uiaa.uiaa_vendor = UGETW(dd->idVendor);
968 uiaa.uiaa_product = UGETW(dd->idProduct);
969 uiaa.uiaa_release = UGETW(dd->bcdDevice);
970 uiaa.uiaa_configno = dev->ud_cdesc->bConfigurationValue;
971 uiaa.uiaa_ifaces = ifaces;
972 uiaa.uiaa_nifaces = nifaces;
973 ilocs[USBIFIFCF_PORT] = uiaa.uiaa_port;
974 ilocs[USBIFIFCF_VENDOR] = uiaa.uiaa_vendor;
975 ilocs[USBIFIFCF_PRODUCT] = uiaa.uiaa_product;
976 ilocs[USBIFIFCF_RELEASE] = uiaa.uiaa_release;
977 ilocs[USBIFIFCF_CONFIGURATION] = uiaa.uiaa_configno;
978
979 for (i = 0; i < nifaces; i++) {
980 if (!ifaces[i]) {
981 DPRINTF("interface %jd claimed", i, 0, 0, 0);
982 continue; /* interface already claimed */
983 }
984 uiaa.uiaa_iface = ifaces[i];
985 uiaa.uiaa_class = ifaces[i]->ui_idesc->bInterfaceClass;
986 uiaa.uiaa_subclass = ifaces[i]->ui_idesc->bInterfaceSubClass;
987 uiaa.uiaa_proto = ifaces[i]->ui_idesc->bInterfaceProtocol;
988 uiaa.uiaa_ifaceno = ifaces[i]->ui_idesc->bInterfaceNumber;
989
990 DPRINTF("searching for interface %jd...", i, 0, 0, 0);
991 DPRINTF("class %jx subclass %jx proto %jx ifaceno %jd",
992 uiaa.uiaa_class, uiaa.uiaa_subclass, uiaa.uiaa_proto,
993 uiaa.uiaa_ifaceno);
994 ilocs[USBIFIFCF_INTERFACE] = uiaa.uiaa_ifaceno;
995 if (locators != NULL) {
996 loc = locators[USBIFIFCF_CONFIGURATION];
997 if (loc != USBIFIFCF_CONFIGURATION_DEFAULT &&
998 loc != uiaa.uiaa_configno)
999 continue;
1000 loc = locators[USBIFIFCF_INTERFACE];
1001 if (loc != USBIFIFCF_INTERFACE_DEFAULT &&
1002 loc != uiaa.uiaa_ifaceno)
1003 continue;
1004 }
1005 KERNEL_LOCK(1, curlwp);
1006 dv = config_found_sm_loc(parent, "usbifif", ilocs, &uiaa,
1007 usbd_ifprint, config_stdsubmatch);
1008 KERNEL_UNLOCK_ONE(curlwp);
1009 if (!dv)
1010 continue;
1011
1012 usbd_properties(dv, dev);
1013
1014 /* claim */
1015 ifaces[i] = NULL;
1016 /* account for ifaces claimed by the driver behind our back */
1017 for (j = 0; j < nifaces; j++) {
1018
1019 if (!ifaces[j] && !dev->ud_subdevs[j]) {
1020 DPRINTF("interface %jd claimed behind our back",
1021 j, 0, 0, 0);
1022 dev->ud_subdevs[j] = dv;
1023 dev->ud_nifaces_claimed++;
1024 }
1025 }
1026 }
1027
1028 kmem_free(ifaces, nifaces * sizeof(*ifaces));
1029 return USBD_NORMAL_COMPLETION;
1030 }
1031
1032 usbd_status
1033 usbd_probe_and_attach(device_t parent, struct usbd_device *dev,
1034 int port, int addr)
1035 {
1036 USBHIST_FUNC();
1037 USBHIST_CALLARGS(usbdebug, "trying device specific drivers", 0, 0, 0, 0);
1038 usb_device_descriptor_t *dd = &dev->ud_ddesc;
1039 int confi, nifaces;
1040 usbd_status err;
1041
1042 /* First try with device specific drivers. */
1043 err = usbd_attachwholedevice(parent, dev, port, 0);
1044 if (dev->ud_nifaces_claimed || err)
1045 return err;
1046 DPRINTF("no device specific driver found", 0, 0, 0, 0);
1047
1048 DPRINTF("looping over %jd configurations", dd->bNumConfigurations,
1049 0, 0, 0);
1050 for (confi = 0; confi < dd->bNumConfigurations; confi++) {
1051 DPRINTFN(1, "trying config idx=%jd", confi, 0, 0, 0);
1052 err = usbd_set_config_index(dev, confi, 1);
1053 if (err) {
1054 DPRINTF("port %jd, set config at addr %jd failed, "
1055 "error=%jd", port, addr, err, 0);
1056 printf("%s: port %d, set config at addr %d failed\n",
1057 device_xname(parent), port, addr);
1058 return err;
1059 }
1060 nifaces = dev->ud_cdesc->bNumInterface;
1061 dev->ud_subdevs = kmem_zalloc(nifaces * sizeof(device_t),
1062 KM_SLEEP);
1063 if (dev->ud_subdevs == NULL)
1064 return USBD_NOMEM;
1065 dev->ud_subdevlen = nifaces;
1066
1067 err = usbd_attachinterfaces(parent, dev, port, NULL);
1068
1069 if (!dev->ud_nifaces_claimed) {
1070 kmem_free(dev->ud_subdevs,
1071 dev->ud_subdevlen * sizeof(device_t));
1072 dev->ud_subdevs = 0;
1073 dev->ud_subdevlen = 0;
1074 }
1075 if (dev->ud_nifaces_claimed || err)
1076 return err;
1077 }
1078 /* No interfaces were attached in any of the configurations. */
1079
1080 if (dd->bNumConfigurations > 1) /* don't change if only 1 config */
1081 usbd_set_config_index(dev, 0, 0);
1082
1083 DPRINTF("no interface drivers found", 0, 0, 0, 0);
1084
1085 /* Finally try the generic driver. */
1086 err = usbd_attachwholedevice(parent, dev, port, 1);
1087
1088 /*
1089 * The generic attach failed, but leave the device as it is.
1090 * We just did not find any drivers, that's all. The device is
1091 * fully operational and not harming anyone.
1092 */
1093 DPRINTF("generic attach failed", 0, 0, 0, 0);
1094
1095 return USBD_NORMAL_COMPLETION;
1096 }
1097
1098 /**
1099 * Called from uhub_rescan(). usbd_new_device() for the target dev must be
1100 * called before calling this.
1101 */
1102 usbd_status
1103 usbd_reattach_device(device_t parent, struct usbd_device *dev,
1104 int port, const int *locators)
1105 {
1106 int i, loc;
1107
1108 if (locators != NULL) {
1109 loc = locators[USBIFIFCF_PORT];
1110 if (loc != USBIFIFCF_PORT_DEFAULT && loc != port)
1111 return USBD_NORMAL_COMPLETION;
1112 loc = locators[USBIFIFCF_VENDOR];
1113 if (loc != USBIFIFCF_VENDOR_DEFAULT &&
1114 loc != UGETW(dev->ud_ddesc.idVendor))
1115 return USBD_NORMAL_COMPLETION;
1116 loc = locators[USBIFIFCF_PRODUCT];
1117 if (loc != USBIFIFCF_PRODUCT_DEFAULT &&
1118 loc != UGETW(dev->ud_ddesc.idProduct))
1119 return USBD_NORMAL_COMPLETION;
1120 loc = locators[USBIFIFCF_RELEASE];
1121 if (loc != USBIFIFCF_RELEASE_DEFAULT &&
1122 loc != UGETW(dev->ud_ddesc.bcdDevice))
1123 return USBD_NORMAL_COMPLETION;
1124 }
1125 if (dev->ud_subdevlen == 0) {
1126 /* XXX: check USBIFIFCF_CONFIGURATION and
1127 * USBIFIFCF_INTERFACE too */
1128 return usbd_probe_and_attach(parent, dev, port, dev->ud_addr);
1129 } else if (dev->ud_subdevlen != dev->ud_cdesc->bNumInterface) {
1130 /* device-specific or generic driver is already attached. */
1131 return USBD_NORMAL_COMPLETION;
1132 }
1133 /* Does the device have unconfigured interfaces? */
1134 for (i = 0; i < dev->ud_subdevlen; i++) {
1135 if (dev->ud_subdevs[i] == NULL) {
1136 break;
1137 }
1138 }
1139 if (i >= dev->ud_subdevlen)
1140 return USBD_NORMAL_COMPLETION;
1141 return usbd_attachinterfaces(parent, dev, port, locators);
1142 }
1143
1144 /*
1145 * Called when a new device has been put in the powered state,
1146 * but not yet in the addressed state.
1147 * Get initial descriptor, set the address, get full descriptor,
1148 * and attach a driver.
1149 */
1150 usbd_status
1151 usbd_new_device(device_t parent, struct usbd_bus *bus, int depth, int speed,
1152 int port, struct usbd_port *up)
1153 {
1154 USBHIST_FUNC();
1155 USBHIST_CALLARGS(usbdebug, "bus=%#jx port=%jd depth=%jd speed=%jd",
1156 (uintptr_t)bus, port, depth, speed);
1157 struct usbd_device *dev, *adev;
1158 struct usbd_device *hub;
1159 usb_device_descriptor_t *dd;
1160 usb_port_status_t ps;
1161 usbd_status err;
1162 int addr;
1163 int i;
1164 int p;
1165
1166 if (bus->ub_methods->ubm_newdev != NULL)
1167 return (bus->ub_methods->ubm_newdev)(parent, bus, depth, speed,
1168 port, up);
1169
1170 addr = usbd_getnewaddr(bus);
1171 if (addr < 0) {
1172 printf("%s: No free USB addresses, new device ignored.\n",
1173 device_xname(bus->ub_usbctl));
1174 return USBD_NO_ADDR;
1175 }
1176
1177 dev = kmem_zalloc(sizeof(*dev), KM_SLEEP);
1178 dev->ud_bus = bus;
1179
1180 /* Set up default endpoint handle. */
1181 dev->ud_ep0.ue_edesc = &dev->ud_ep0desc;
1182
1183 /* Set up default endpoint descriptor. */
1184 dev->ud_ep0desc.bLength = USB_ENDPOINT_DESCRIPTOR_SIZE;
1185 dev->ud_ep0desc.bDescriptorType = UDESC_ENDPOINT;
1186 dev->ud_ep0desc.bEndpointAddress = USB_CONTROL_ENDPOINT;
1187 dev->ud_ep0desc.bmAttributes = UE_CONTROL;
1188 /*
1189 * temporary, will be fixed after first descriptor fetch
1190 * (which uses 64 bytes so it shouldn't be less),
1191 * highspeed devices must support 64 byte packets anyway
1192 */
1193 if (speed == USB_SPEED_HIGH || speed == USB_SPEED_FULL)
1194 USETW(dev->ud_ep0desc.wMaxPacketSize, 64);
1195 else
1196 USETW(dev->ud_ep0desc.wMaxPacketSize, USB_MAX_IPACKET);
1197
1198 dev->ud_ep0desc.bInterval = 0;
1199
1200 /* doesn't matter, just don't leave it uninitialized */
1201 dev->ud_ep0.ue_toggle = 0;
1202
1203 dev->ud_quirks = &usbd_no_quirk;
1204 dev->ud_addr = USB_START_ADDR;
1205 dev->ud_ddesc.bMaxPacketSize = 0;
1206 dev->ud_depth = depth;
1207 dev->ud_powersrc = up;
1208 dev->ud_myhub = up->up_parent;
1209
1210 up->up_dev = dev;
1211
1212 /* Locate port on upstream high speed hub */
1213 for (adev = dev, hub = up->up_parent;
1214 hub != NULL && hub->ud_speed != USB_SPEED_HIGH;
1215 adev = hub, hub = hub->ud_myhub)
1216 ;
1217 if (hub) {
1218 for (p = 1; p <= hub->ud_hub->uh_hubdesc.bNbrPorts; p++) {
1219 if (hub->ud_hub->uh_ports[p - 1].up_dev == adev) {
1220 dev->ud_myhsport =
1221 &hub->ud_hub->uh_ports[p - 1];
1222 goto found;
1223 }
1224 }
1225 panic("usbd_new_device: cannot find HS port");
1226 found:
1227 DPRINTFN(1, "high speed port %jd", p, 0, 0, 0);
1228 } else {
1229 dev->ud_myhsport = NULL;
1230 }
1231 dev->ud_speed = speed;
1232 dev->ud_langid = USBD_NOLANG;
1233 dev->ud_cookie.cookie = ++usb_cookie_no;
1234
1235 /* Establish the default pipe. */
1236 err = usbd_setup_pipe_flags(dev, 0, &dev->ud_ep0, USBD_DEFAULT_INTERVAL,
1237 &dev->ud_pipe0, USBD_MPSAFE);
1238 if (err) {
1239 usbd_remove_device(dev, up);
1240 return err;
1241 }
1242
1243 dd = &dev->ud_ddesc;
1244 /* Try a few times in case the device is slow (i.e. outside specs.) */
1245 for (i = 0; i < 10; i++) {
1246 /* Get the first 8 bytes of the device descriptor. */
1247 err = usbd_get_initial_ddesc(dev, dd);
1248 if (!err)
1249 break;
1250 /*
1251 * The root hub can never fail to give the initial descriptor,
1252 * but assert it just in case.
1253 */
1254 KASSERT(up->up_parent);
1255 usbd_delay_ms(dev, 200);
1256 if ((i & 3) == 3)
1257 usbd_reset_port(up->up_parent, port, &ps);
1258 }
1259 if (err) {
1260 DPRINTF("addr=%jd, getting first desc failed: %jd", addr, err,
1261 0, 0);
1262 usbd_remove_device(dev, up);
1263 return err;
1264 }
1265
1266 /* Windows resets the port here, do likewise */
1267 if (up->up_parent)
1268 usbd_reset_port(up->up_parent, port, &ps);
1269
1270 if (speed == USB_SPEED_HIGH) {
1271 /* Max packet size must be 64 (sec 5.5.3). */
1272 if (dd->bMaxPacketSize != USB_2_MAX_CTRL_PACKET) {
1273 #ifdef DIAGNOSTIC
1274 printf("usbd_new_device: addr=%d bad max packet "
1275 "size=%d. adjusting to %d.\n",
1276 addr, dd->bMaxPacketSize, USB_2_MAX_CTRL_PACKET);
1277 #endif
1278 dd->bMaxPacketSize = USB_2_MAX_CTRL_PACKET;
1279 }
1280 }
1281
1282 DPRINTF("adding unit addr=%jd, rev=%02jx, class=%jd, subclass=%jd",
1283 addr, UGETW(dd->bcdUSB), dd->bDeviceClass, dd->bDeviceSubClass);
1284 DPRINTF("protocol=%jd, maxpacket=%jd, len=%jd, speed=%jd",
1285 dd->bDeviceProtocol, dd->bMaxPacketSize, dd->bLength, dev->ud_speed);
1286
1287 if (dd->bDescriptorType != UDESC_DEVICE) {
1288 /* Illegal device descriptor */
1289 DPRINTF("illegal descriptor %jd", dd->bDescriptorType, 0, 0, 0);
1290 usbd_remove_device(dev, up);
1291 return USBD_INVAL;
1292 }
1293
1294 if (dd->bLength < USB_DEVICE_DESCRIPTOR_SIZE) {
1295 DPRINTF("bad length %jd", dd->bLength, 0, 0, 0);
1296 usbd_remove_device(dev, up);
1297 return USBD_INVAL;
1298 }
1299
1300 USETW(dev->ud_ep0desc.wMaxPacketSize, dd->bMaxPacketSize);
1301
1302 /* Re-establish the default pipe with the new MPS. */
1303 usbd_kill_pipe(dev->ud_pipe0);
1304 dev->ud_pipe0 = NULL;
1305 err = usbd_setup_pipe_flags(dev, 0, &dev->ud_ep0, USBD_DEFAULT_INTERVAL,
1306 &dev->ud_pipe0, USBD_MPSAFE);
1307 if (err) {
1308 DPRINTF("setup default pipe failed err %jd", err, 0, 0, 0);
1309 usbd_remove_device(dev, up);
1310 return err;
1311 }
1312
1313 /* Set the address */
1314 DPRINTFN(5, "setting device address=%jd", addr, 0, 0, 0);
1315 err = usbd_set_address(dev, addr);
1316 if (err) {
1317 DPRINTF("set address %jd failed, err = %jd", addr, err, 0, 0);
1318 err = USBD_SET_ADDR_FAILED;
1319 usbd_remove_device(dev, up);
1320 return err;
1321 }
1322
1323 /* Allow device time to set new address */
1324 usbd_delay_ms(dev, USB_SET_ADDRESS_SETTLE);
1325 dev->ud_addr = addr; /* new device address now */
1326 bus->ub_devices[usb_addr2dindex(addr)] = dev;
1327
1328 /* Re-establish the default pipe with the new address. */
1329 usbd_kill_pipe(dev->ud_pipe0);
1330 dev->ud_pipe0 = NULL;
1331 err = usbd_setup_pipe_flags(dev, 0, &dev->ud_ep0, USBD_DEFAULT_INTERVAL,
1332 &dev->ud_pipe0, USBD_MPSAFE);
1333 if (err) {
1334 DPRINTF("setup default pipe failed, err = %jd", err, 0, 0, 0);
1335 usbd_remove_device(dev, up);
1336 return err;
1337 }
1338
1339 err = usbd_reload_device_desc(dev);
1340 if (err) {
1341 DPRINTF("addr=%jd, getting full desc failed, err = %jd", addr,
1342 err, 0, 0);
1343 usbd_remove_device(dev, up);
1344 return err;
1345 }
1346
1347 /* Assume 100mA bus powered for now. Changed when configured. */
1348 dev->ud_power = USB_MIN_POWER;
1349 dev->ud_selfpowered = 0;
1350
1351 DPRINTF("new dev (addr %jd), dev=%#jx, parent=%#jx",
1352 addr, (uintptr_t)dev, (uintptr_t)parent, 0);
1353
1354 usbd_get_device_strings(dev);
1355
1356 usbd_add_dev_event(USB_EVENT_DEVICE_ATTACH, dev);
1357
1358 if (port == 0) { /* root hub */
1359 KASSERT(addr == 1);
1360 usbd_attach_roothub(parent, dev);
1361 return USBD_NORMAL_COMPLETION;
1362 }
1363
1364 err = usbd_probe_and_attach(parent, dev, port, addr);
1365 if (err) {
1366 usbd_remove_device(dev, up);
1367 return err;
1368 }
1369
1370 return USBD_NORMAL_COMPLETION;
1371 }
1372
1373 usbd_status
1374 usbd_reload_device_desc(struct usbd_device *dev)
1375 {
1376 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
1377 usb_device_descriptor_t *udd = &dev->ud_ddesc;
1378 usbd_status err;
1379
1380 /* Get the full device descriptor. */
1381 err = usbd_get_device_desc(dev, udd);
1382 if (err)
1383 return err;
1384 if (udd->bDescriptorType != UDESC_DEVICE)
1385 return USBD_INVAL;
1386 if (udd->bLength < USB_DEVICE_DESCRIPTOR_SIZE)
1387 return USBD_INVAL;
1388
1389 DPRINTFN(15, "bLength %5ju", udd->bLength, 0, 0, 0);
1390 DPRINTFN(15, "bDescriptorType %5ju", udd->bDescriptorType, 0, 0, 0);
1391 DPRINTFN(15, "bcdUSB %2jx.%02jx", udd->bcdUSB[1],
1392 udd->bcdUSB[0], 0, 0);
1393 DPRINTFN(15, "bDeviceClass %5ju", udd->bDeviceClass, 0, 0, 0);
1394 DPRINTFN(15, "bDeviceSubClass %5ju", udd->bDeviceSubClass, 0, 0, 0);
1395 DPRINTFN(15, "bDeviceProtocol %5ju", udd->bDeviceProtocol, 0, 0, 0);
1396 DPRINTFN(15, "bMaxPacketSize0 %5ju", udd->bMaxPacketSize, 0, 0, 0);
1397 DPRINTFN(15, "idVendor 0x%02jx 0x%02jx",
1398 udd->idVendor[0],
1399 udd->idVendor[1], 0, 0);
1400 DPRINTFN(15, "idProduct 0x%02jx 0x%02jx",
1401 udd->idProduct[0],
1402 udd->idProduct[1], 0, 0);
1403 DPRINTFN(15, "bcdDevice %2jx.%02jx", udd->bcdDevice[1],
1404 udd->bcdDevice[0], 0, 0);
1405 DPRINTFN(15, "iManufacturer %5ju", udd->iManufacturer, 0, 0, 0);
1406 DPRINTFN(15, "iProduct %5ju", udd->iProduct, 0, 0, 0);
1407 DPRINTFN(15, "iSerial %5ju", udd->iSerialNumber, 0, 0, 0);
1408 DPRINTFN(15, "bNumConfigurations %5ju", udd->bNumConfigurations, 0, 0,
1409 0);
1410
1411 /* Figure out what's wrong with this device. */
1412 dev->ud_quirks = usbd_find_quirk(udd);
1413
1414 return USBD_NORMAL_COMPLETION;
1415 }
1416
1417 void
1418 usbd_remove_device(struct usbd_device *dev, struct usbd_port *up)
1419 {
1420
1421 USBHIST_FUNC();
1422 USBHIST_CALLARGS(usbdebug, "dev %#jx up %#jx",
1423 (uintptr_t)dev, (uintptr_t)up, 0, 0);
1424
1425 if (dev->ud_pipe0 != NULL)
1426 usbd_kill_pipe(dev->ud_pipe0);
1427 up->up_dev = NULL;
1428 dev->ud_bus->ub_devices[usb_addr2dindex(dev->ud_addr)] = NULL;
1429
1430 if (dev->ud_vendor != NULL) {
1431 kmem_free(dev->ud_vendor, USB_MAX_ENCODED_STRING_LEN);
1432 }
1433 if (dev->ud_product != NULL) {
1434 kmem_free(dev->ud_product, USB_MAX_ENCODED_STRING_LEN);
1435 }
1436 if (dev->ud_serial != NULL) {
1437 kmem_free(dev->ud_serial, USB_MAX_ENCODED_STRING_LEN);
1438 }
1439 kmem_free(dev, sizeof(*dev));
1440 }
1441
1442 int
1443 usbd_print(void *aux, const char *pnp)
1444 {
1445 struct usb_attach_arg *uaa = aux;
1446
1447 if (pnp) {
1448 #define USB_DEVINFO 1024
1449 char *devinfo;
1450 if (!uaa->uaa_usegeneric)
1451 return QUIET;
1452 devinfo = kmem_alloc(USB_DEVINFO, KM_SLEEP);
1453 usbd_devinfo(uaa->uaa_device, 1, devinfo, USB_DEVINFO);
1454 aprint_normal("%s, %s", devinfo, pnp);
1455 kmem_free(devinfo, USB_DEVINFO);
1456 }
1457 aprint_normal(" port %d", uaa->uaa_port);
1458 #if 0
1459 /*
1460 * It gets very crowded with these locators on the attach line.
1461 * They are not really needed since they are printed in the clear
1462 * by each driver.
1463 */
1464 if (uaa->uaa_vendor != UHUB_UNK_VENDOR)
1465 aprint_normal(" vendor 0x%04x", uaa->uaa_vendor);
1466 if (uaa->uaa_product != UHUB_UNK_PRODUCT)
1467 aprint_normal(" product 0x%04x", uaa->uaa_product);
1468 if (uaa->uaa_release != UHUB_UNK_RELEASE)
1469 aprint_normal(" release 0x%04x", uaa->uaa_release);
1470 #endif
1471 return UNCONF;
1472 }
1473
1474 int
1475 usbd_ifprint(void *aux, const char *pnp)
1476 {
1477 struct usbif_attach_arg *uiaa = aux;
1478
1479 if (pnp)
1480 return QUIET;
1481 aprint_normal(" port %d", uiaa->uiaa_port);
1482 aprint_normal(" configuration %d", uiaa->uiaa_configno);
1483 aprint_normal(" interface %d", uiaa->uiaa_ifaceno);
1484 #if 0
1485 /*
1486 * It gets very crowded with these locators on the attach line.
1487 * They are not really needed since they are printed in the clear
1488 * by each driver.
1489 */
1490 if (uaa->uaa_vendor != UHUB_UNK_VENDOR)
1491 aprint_normal(" vendor 0x%04x", uaa->uaa_vendor);
1492 if (uaa->uaa_product != UHUB_UNK_PRODUCT)
1493 aprint_normal(" product 0x%04x", uaa->uaa_product);
1494 if (uaa->uaa_release != UHUB_UNK_RELEASE)
1495 aprint_normal(" release 0x%04x", uaa->uaa_release);
1496 #endif
1497 return UNCONF;
1498 }
1499
1500 void
1501 usbd_fill_deviceinfo(struct usbd_device *dev, struct usb_device_info *di,
1502 int usedev)
1503 {
1504 struct usbd_port *p;
1505 int i, j, err;
1506
1507 di->udi_bus = device_unit(dev->ud_bus->ub_usbctl);
1508 di->udi_addr = dev->ud_addr;
1509 di->udi_cookie = dev->ud_cookie;
1510 usbd_devinfo_vp(dev, di->udi_vendor, sizeof(di->udi_vendor),
1511 di->udi_product, sizeof(di->udi_product), usedev, 1);
1512 usbd_printBCD(di->udi_release, sizeof(di->udi_release),
1513 UGETW(dev->ud_ddesc.bcdDevice));
1514 if (usedev) {
1515 usbd_status uerr = usbd_get_string(dev,
1516 dev->ud_ddesc.iSerialNumber, di->udi_serial);
1517 if (uerr != USBD_NORMAL_COMPLETION) {
1518 di->udi_serial[0] = '\0';
1519 } else {
1520 usbd_trim_spaces(di->udi_serial);
1521 }
1522 } else {
1523 di->udi_serial[0] = '\0';
1524 if (dev->ud_serial) {
1525 strlcpy(di->udi_serial, dev->ud_serial,
1526 sizeof(di->udi_serial));
1527 }
1528 }
1529
1530 di->udi_vendorNo = UGETW(dev->ud_ddesc.idVendor);
1531 di->udi_productNo = UGETW(dev->ud_ddesc.idProduct);
1532 di->udi_releaseNo = UGETW(dev->ud_ddesc.bcdDevice);
1533 di->udi_class = dev->ud_ddesc.bDeviceClass;
1534 di->udi_subclass = dev->ud_ddesc.bDeviceSubClass;
1535 di->udi_protocol = dev->ud_ddesc.bDeviceProtocol;
1536 di->udi_config = dev->ud_config;
1537 di->udi_power = dev->ud_selfpowered ? 0 : dev->ud_power;
1538 di->udi_speed = dev->ud_speed;
1539
1540 if (dev->ud_subdevlen > 0) {
1541 for (i = 0, j = 0; i < dev->ud_subdevlen &&
1542 j < USB_MAX_DEVNAMES; i++) {
1543 if (!dev->ud_subdevs[i])
1544 continue;
1545 strncpy(di->udi_devnames[j],
1546 device_xname(dev->ud_subdevs[i]), USB_MAX_DEVNAMELEN);
1547 di->udi_devnames[j][USB_MAX_DEVNAMELEN-1] = '\0';
1548 j++;
1549 }
1550 } else {
1551 j = 0;
1552 }
1553 for (/* j is set */; j < USB_MAX_DEVNAMES; j++)
1554 di->udi_devnames[j][0] = 0; /* empty */
1555
1556 if (!dev->ud_hub) {
1557 di->udi_nports = 0;
1558 return;
1559 }
1560
1561 const int nports = dev->ud_hub->uh_hubdesc.bNbrPorts;
1562 for (i = 1; i <= __arraycount(di->udi_ports) && i <= nports; i++) {
1563 p = &dev->ud_hub->uh_ports[i - 1];
1564 if (p->up_dev)
1565 err = p->up_dev->ud_addr;
1566 else {
1567 const int s = UGETW(p->up_status.wPortStatus);
1568 const bool sshub_p = USB_IS_SS(dev->ud_speed);
1569 if (s & UPS_PORT_ENABLED)
1570 err = USB_PORT_ENABLED;
1571 else if (s & UPS_SUSPEND)
1572 err = USB_PORT_SUSPENDED;
1573 /*
1574 * Note: UPS_PORT_POWER_SS is available only
1575 * on 3.x, and UPS_PORT_POWER is available
1576 * only on 2.0 or 1.1.
1577 */
1578 else if (sshub_p && (s & UPS_PORT_POWER_SS))
1579 err = USB_PORT_POWERED;
1580 else if (!sshub_p && (s & UPS_PORT_POWER))
1581 err = USB_PORT_POWERED;
1582 else
1583 err = USB_PORT_DISABLED;
1584 }
1585 di->udi_ports[i - 1] = err;
1586 }
1587 di->udi_nports = nports;
1588 }
1589
1590 void
1591 usb_free_device(struct usbd_device *dev)
1592 {
1593 int ifcidx, nifc;
1594
1595 if (dev->ud_pipe0 != NULL)
1596 usbd_kill_pipe(dev->ud_pipe0);
1597 if (dev->ud_ifaces != NULL) {
1598 nifc = dev->ud_cdesc->bNumInterface;
1599 for (ifcidx = 0; ifcidx < nifc; ifcidx++)
1600 usbd_free_iface_data(dev, ifcidx);
1601 kmem_free(dev->ud_ifaces,
1602 nifc * sizeof(struct usbd_interface));
1603 }
1604 if (dev->ud_cdesc != NULL)
1605 kmem_free(dev->ud_cdesc, UGETW(dev->ud_cdesc->wTotalLength));
1606 if (dev->ud_bdesc != NULL)
1607 kmem_free(dev->ud_bdesc, UGETW(dev->ud_bdesc->wTotalLength));
1608 if (dev->ud_subdevlen > 0) {
1609 kmem_free(dev->ud_subdevs,
1610 dev->ud_subdevlen * sizeof(device_t));
1611 dev->ud_subdevlen = 0;
1612 }
1613 if (dev->ud_vendor) {
1614 kmem_free(dev->ud_vendor, USB_MAX_ENCODED_STRING_LEN);
1615 }
1616 if (dev->ud_product) {
1617 kmem_free(dev->ud_product, USB_MAX_ENCODED_STRING_LEN);
1618 }
1619 if (dev->ud_serial) {
1620 kmem_free(dev->ud_serial, USB_MAX_ENCODED_STRING_LEN);
1621 }
1622 kmem_free(dev, sizeof(*dev));
1623 }
1624
1625 /*
1626 * The general mechanism for detaching drivers works as follows: Each
1627 * driver is responsible for maintaining a reference count on the
1628 * number of outstanding references to its softc (e.g. from
1629 * processing hanging in a read or write). The detach method of the
1630 * driver decrements this counter and flags in the softc that the
1631 * driver is dying and then wakes any sleepers. It then sleeps on the
1632 * softc. Each place that can sleep must maintain the reference
1633 * count. When the reference count drops to -1 (0 is the normal value
1634 * of the reference count) then a wakeup on the softc is performed
1635 * signaling to the detach waiter that all references are gone.
1636 */
1637
1638 /*
1639 * Called from process context when we discover that a port has
1640 * been disconnected.
1641 */
1642 int
1643 usb_disconnect_port(struct usbd_port *up, device_t parent, int flags)
1644 {
1645 struct usbd_device *dev = up->up_dev;
1646 device_t subdev;
1647 char subdevname[16];
1648 const char *hubname = device_xname(parent);
1649 int i, rc;
1650
1651 USBHIST_FUNC();
1652 USBHIST_CALLARGS(usbdebug, "up=%#jx dev=%#jx port=%jd",
1653 (uintptr_t)up, (uintptr_t)dev, up->up_portno, 0);
1654
1655 if (dev == NULL) {
1656 return 0;
1657 }
1658
1659 if (dev->ud_subdevlen > 0) {
1660 DPRINTFN(3, "disconnect subdevs", 0, 0, 0, 0);
1661 for (i = 0; i < dev->ud_subdevlen; i++) {
1662 if ((subdev = dev->ud_subdevs[i]) == NULL)
1663 continue;
1664 strlcpy(subdevname, device_xname(subdev),
1665 sizeof(subdevname));
1666 KERNEL_LOCK(1, curlwp);
1667 rc = config_detach(subdev, flags);
1668 KERNEL_UNLOCK_ONE(curlwp);
1669 if (rc != 0)
1670 return rc;
1671 printf("%s: at %s", subdevname, hubname);
1672 if (up->up_portno != 0)
1673 printf(" port %d", up->up_portno);
1674 printf(" (addr %d) disconnected\n", dev->ud_addr);
1675 }
1676 KASSERT(!dev->ud_nifaces_claimed);
1677 }
1678
1679 mutex_enter(dev->ud_bus->ub_lock);
1680 dev->ud_bus->ub_devices[usb_addr2dindex(dev->ud_addr)] = NULL;
1681 up->up_dev = NULL;
1682 mutex_exit(dev->ud_bus->ub_lock);
1683
1684 usbd_add_dev_event(USB_EVENT_DEVICE_DETACH, dev);
1685
1686 usb_free_device(dev);
1687
1688 return 0;
1689 }
1690