usb_subr.c revision 1.277 1 /* $NetBSD: usb_subr.c,v 1.277 2022/04/06 22:01:45 mlelstv Exp $ */
2 /* $FreeBSD: src/sys/dev/usb/usb_subr.c,v 1.18 1999/11/17 22:33:47 n_hibma Exp $ */
3
4 /*
5 * Copyright (c) 1998, 2004 The NetBSD Foundation, Inc.
6 * All rights reserved.
7 *
8 * This code is derived from software contributed to The NetBSD Foundation
9 * by Lennart Augustsson (lennart (at) augustsson.net) at
10 * Carlstedt Research & Technology.
11 *
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
14 * are met:
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions and the following disclaimer.
17 * 2. Redistributions in binary form must reproduce the above copyright
18 * notice, this list of conditions and the following disclaimer in the
19 * documentation and/or other materials provided with the distribution.
20 *
21 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
22 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
23 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
24 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
25 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
31 * POSSIBILITY OF SUCH DAMAGE.
32 */
33
34 #include <sys/cdefs.h>
35 __KERNEL_RCSID(0, "$NetBSD: usb_subr.c,v 1.277 2022/04/06 22:01:45 mlelstv Exp $");
36
37 #ifdef _KERNEL_OPT
38 #include "opt_compat_netbsd.h"
39 #include "opt_usb.h"
40 #include "opt_usbverbose.h"
41 #endif
42
43 #include <sys/param.h>
44 #include <sys/systm.h>
45 #include <sys/kernel.h>
46 #include <sys/kmem.h>
47 #include <sys/device.h>
48 #include <sys/select.h>
49 #include <sys/proc.h>
50
51 #include <sys/bus.h>
52 #include <sys/module.h>
53
54 #include <dev/usb/usb.h>
55
56 #include <dev/usb/usbdi.h>
57 #include <dev/usb/usbdi_util.h>
58 #include <dev/usb/usbdivar.h>
59 #include <dev/usb/usbdevs.h>
60 #include <dev/usb/usb_quirks.h>
61 #include <dev/usb/usb_verbose.h>
62 #include <dev/usb/usbhist.h>
63
64 #include "locators.h"
65
66 #define DPRINTF(FMT,A,B,C,D) USBHIST_LOG(usbdebug,FMT,A,B,C,D)
67 #define DPRINTFN(N,FMT,A,B,C,D) USBHIST_LOGN(usbdebug,N,FMT,A,B,C,D)
68
69 Static void usbd_devinfo(struct usbd_device *, int, char *, size_t);
70 Static int usbd_getnewaddr(struct usbd_bus *);
71 Static int usbd_print(void *, const char *);
72 Static int usbd_ifprint(void *, const char *);
73 Static void usbd_free_iface_data(struct usbd_device *, int);
74
75 uint32_t usb_cookie_no = 0;
76
77 Static const char * const usbd_error_strs[] = {
78 "NORMAL_COMPLETION",
79 "IN_PROGRESS",
80 "PENDING_REQUESTS",
81 "NOT_STARTED",
82 "INVAL",
83 "NOMEM",
84 "CANCELLED",
85 "BAD_ADDRESS",
86 "IN_USE",
87 "NO_ADDR",
88 "SET_ADDR_FAILED",
89 "NO_POWER",
90 "TOO_DEEP",
91 "IOERROR",
92 "NOT_CONFIGURED",
93 "TIMEOUT",
94 "SHORT_XFER",
95 "STALLED",
96 "INTERRUPTED",
97 "XXX",
98 };
99
100 DEV_VERBOSE_DEFINE(usb);
101
102 const char *
103 usbd_errstr(usbd_status err)
104 {
105 static char buffer[5];
106
107 if (err < USBD_ERROR_MAX) {
108 return usbd_error_strs[err];
109 } else {
110 snprintf(buffer, sizeof(buffer), "%d", err);
111 return buffer;
112 }
113 }
114
115 static void
116 usbd_trim_spaces(char *p)
117 {
118 char *q, *e;
119
120 q = e = p;
121 while (*q == ' ') /* skip leading spaces */
122 q++;
123 while ((*p = *q++)) /* copy string */
124 if (*p++ != ' ') /* remember last non-space */
125 e = p;
126 *e = '\0'; /* kill trailing spaces */
127 }
128
129 static void
130 usbd_get_device_string(struct usbd_device *ud, uByte index, char **buf)
131 {
132 char *b;
133 usbd_status err;
134
135 b = kmem_alloc(USB_MAX_ENCODED_STRING_LEN, KM_SLEEP);
136 err = usbd_get_string0(ud, index, b, true);
137 if (err != USBD_NORMAL_COMPLETION) {
138 kmem_free(b, USB_MAX_ENCODED_STRING_LEN);
139 b = NULL;
140 } else {
141 usbd_trim_spaces(b);
142 }
143
144 *buf = b;
145 }
146
147 void
148 usbd_get_device_strings(struct usbd_device *ud)
149 {
150 usb_device_descriptor_t *udd = &ud->ud_ddesc;
151
152 usbd_get_device_string(ud, udd->iManufacturer, &ud->ud_vendor);
153 usbd_get_device_string(ud, udd->iProduct, &ud->ud_product);
154 usbd_get_device_string(ud, udd->iSerialNumber, &ud->ud_serial);
155 }
156
157
158 void
159 usbd_devinfo_vp(struct usbd_device *dev, char *v, size_t vl, char *p,
160 size_t pl, int usedev, int useencoded)
161 {
162 usb_device_descriptor_t *udd = &dev->ud_ddesc;
163 if (dev == NULL)
164 return;
165
166 v[0] = p[0] = '\0';
167
168 if (usedev) {
169 if (usbd_get_string0(dev, udd->iManufacturer, v, useencoded) ==
170 USBD_NORMAL_COMPLETION)
171 usbd_trim_spaces(v);
172 if (usbd_get_string0(dev, udd->iProduct, p, useencoded) ==
173 USBD_NORMAL_COMPLETION)
174 usbd_trim_spaces(p);
175 } else {
176 if (dev->ud_vendor) {
177 strlcpy(v, dev->ud_vendor, vl);
178 }
179 if (dev->ud_product) {
180 strlcpy(p, dev->ud_product, pl);
181 }
182 }
183 if (v[0] == '\0')
184 usb_findvendor(v, vl, UGETW(udd->idVendor));
185 if (p[0] == '\0')
186 usb_findproduct(p, pl, UGETW(udd->idVendor),
187 UGETW(udd->idProduct));
188 }
189
190 int
191 usbd_printBCD(char *cp, size_t l, int bcd)
192 {
193 return snprintf(cp, l, "%x.%02x", bcd >> 8, bcd & 0xff);
194 }
195
196 Static void
197 usbd_devinfo(struct usbd_device *dev, int showclass, char *cp, size_t l)
198 {
199 usb_device_descriptor_t *udd = &dev->ud_ddesc;
200 char *vendor, *product;
201 int bcdDevice, bcdUSB;
202 char *ep;
203
204 vendor = kmem_alloc(USB_MAX_ENCODED_STRING_LEN * 2, KM_SLEEP);
205 product = &vendor[USB_MAX_ENCODED_STRING_LEN];
206
207 ep = cp + l;
208
209 usbd_devinfo_vp(dev, vendor, USB_MAX_ENCODED_STRING_LEN,
210 product, USB_MAX_ENCODED_STRING_LEN, 0, 1);
211 cp += snprintf(cp, ep - cp, "%s (0x%04x) %s (0x%04x)", vendor,
212 UGETW(udd->idVendor), product, UGETW(udd->idProduct));
213 if (showclass)
214 cp += snprintf(cp, ep - cp, ", class %d/%d",
215 udd->bDeviceClass, udd->bDeviceSubClass);
216 bcdUSB = UGETW(udd->bcdUSB);
217 bcdDevice = UGETW(udd->bcdDevice);
218 cp += snprintf(cp, ep - cp, ", rev ");
219 cp += usbd_printBCD(cp, ep - cp, bcdUSB);
220 *cp++ = '/';
221 cp += usbd_printBCD(cp, ep - cp, bcdDevice);
222 cp += snprintf(cp, ep - cp, ", addr %d", dev->ud_addr);
223 *cp = 0;
224 kmem_free(vendor, USB_MAX_ENCODED_STRING_LEN * 2);
225 }
226
227 char *
228 usbd_devinfo_alloc(struct usbd_device *dev, int showclass)
229 {
230 char *devinfop;
231
232 devinfop = kmem_alloc(DEVINFOSIZE, KM_SLEEP);
233 usbd_devinfo(dev, showclass, devinfop, DEVINFOSIZE);
234 return devinfop;
235 }
236
237 void
238 usbd_devinfo_free(char *devinfop)
239 {
240 kmem_free(devinfop, DEVINFOSIZE);
241 }
242
243 /* Delay for a certain number of ms */
244 void
245 usb_delay_ms_locked(struct usbd_bus *bus, u_int ms, kmutex_t *lock)
246 {
247 /* Wait at least two clock ticks so we know the time has passed. */
248 if (bus->ub_usepolling || cold)
249 delay((ms+1) * 1000);
250 else
251 kpause("usbdly", false, (ms*hz+999)/1000 + 1, lock);
252 }
253
254 void
255 usb_delay_ms(struct usbd_bus *bus, u_int ms)
256 {
257 usb_delay_ms_locked(bus, ms, NULL);
258 }
259
260 /* Delay given a device handle. */
261 void
262 usbd_delay_ms_locked(struct usbd_device *dev, u_int ms, kmutex_t *lock)
263 {
264 usb_delay_ms_locked(dev->ud_bus, ms, lock);
265 }
266
267 /* Delay given a device handle. */
268 void
269 usbd_delay_ms(struct usbd_device *dev, u_int ms)
270 {
271 usb_delay_ms_locked(dev->ud_bus, ms, NULL);
272 }
273
274 usbd_status
275 usbd_reset_port(struct usbd_device *dev, int port, usb_port_status_t *ps)
276 {
277 USBHIST_FUNC(); USBHIST_CALLARGS(usbdebug, "port %jd", port, 0, 0, 0);
278 usb_device_request_t req;
279 usbd_status err;
280 int n;
281
282 req.bmRequestType = UT_WRITE_CLASS_OTHER;
283 req.bRequest = UR_SET_FEATURE;
284 USETW(req.wValue, UHF_PORT_RESET);
285 USETW(req.wIndex, port);
286 USETW(req.wLength, 0);
287 err = usbd_do_request(dev, &req, 0);
288 DPRINTFN(1, "port %jd reset done, error=%jd", port, err, 0, 0);
289 if (err)
290 return err;
291 n = 10;
292 do {
293 /* Wait for device to recover from reset. */
294 usbd_delay_ms(dev, USB_PORT_RESET_DELAY);
295 err = usbd_get_port_status(dev, port, ps);
296 if (err) {
297 DPRINTF("get status failed %jd", err, 0, 0, 0);
298 return err;
299 }
300 /* If the device disappeared, just give up. */
301 if (!(UGETW(ps->wPortStatus) & UPS_CURRENT_CONNECT_STATUS))
302 return USBD_NORMAL_COMPLETION;
303 } while ((UGETW(ps->wPortChange) & UPS_C_PORT_RESET) == 0 && --n > 0);
304 if (n == 0)
305 return USBD_TIMEOUT;
306 err = usbd_clear_port_feature(dev, port, UHF_C_PORT_RESET);
307 #ifdef USB_DEBUG
308 if (err)
309 DPRINTF("clear port feature failed %jd", err, 0, 0, 0);
310 #endif
311
312 /* Wait for the device to recover from reset. */
313 usbd_delay_ms(dev, USB_PORT_RESET_RECOVERY);
314 return err;
315 }
316
317 usb_interface_descriptor_t *
318 usbd_find_idesc(usb_config_descriptor_t *cd, int ifaceidx, int altidx)
319 {
320 USBHIST_FUNC();
321 USBHIST_CALLARGS(usbdebug, "iface/alt idx %jd/%jd",
322 ifaceidx, altidx, 0, 0);
323 char *p = (char *)cd;
324 char *end = p + UGETW(cd->wTotalLength);
325 usb_descriptor_t *desc;
326 usb_interface_descriptor_t *idesc;
327 int curidx, lastidx, curaidx = 0;
328
329 for (curidx = lastidx = -1; end - p >= sizeof(*desc);) {
330 desc = (usb_descriptor_t *)p;
331
332 DPRINTFN(4, "idx=%jd(%jd) altidx=%jd(%jd)", ifaceidx, curidx,
333 altidx, curaidx);
334 DPRINTFN(4, "len=%jd type=%jd", desc->bLength,
335 desc->bDescriptorType, 0, 0);
336
337 if (desc->bLength < USB_DESCRIPTOR_SIZE)
338 break;
339 if (desc->bLength > end - p)
340 break;
341 p += desc->bLength;
342
343 if (desc->bDescriptorType != UDESC_INTERFACE)
344 continue;
345 if (desc->bLength < USB_INTERFACE_DESCRIPTOR_SIZE)
346 break;
347 idesc = (usb_interface_descriptor_t *)desc;
348
349 if (idesc->bInterfaceNumber != lastidx) {
350 lastidx = idesc->bInterfaceNumber;
351 curidx++;
352 curaidx = 0;
353 } else {
354 curaidx++;
355 }
356 if (ifaceidx == curidx && altidx == curaidx)
357 return idesc;
358 }
359
360 return NULL;
361 }
362
363 usb_endpoint_descriptor_t *
364 usbd_find_edesc(usb_config_descriptor_t *cd, int ifaceidx, int altidx,
365 int endptidx)
366 {
367 char *p = (char *)cd;
368 char *end = p + UGETW(cd->wTotalLength);
369 usb_interface_descriptor_t *idesc;
370 usb_endpoint_descriptor_t *edesc;
371 usb_descriptor_t *desc;
372 int curidx;
373
374 idesc = usbd_find_idesc(cd, ifaceidx, altidx);
375 if (idesc == NULL)
376 return NULL;
377 if (endptidx >= idesc->bNumEndpoints) /* quick exit */
378 return NULL;
379
380 curidx = -1;
381 for (p = (char *)idesc + idesc->bLength; end - p >= sizeof(*edesc);) {
382 desc = (usb_descriptor_t *)p;
383
384 if (desc->bLength < USB_DESCRIPTOR_SIZE)
385 break;
386 if (desc->bLength > end - p)
387 break;
388 p += desc->bLength;
389
390 if (desc->bDescriptorType == UDESC_INTERFACE)
391 break;
392 if (desc->bDescriptorType != UDESC_ENDPOINT)
393 continue;
394
395 if (desc->bLength < USB_ENDPOINT_DESCRIPTOR_SIZE)
396 break;
397 edesc = (usb_endpoint_descriptor_t *)desc;
398
399 curidx++;
400 if (curidx == endptidx)
401 return edesc;
402 }
403 return NULL;
404 }
405
406 static void
407 usbd_iface_init(struct usbd_device *dev, int ifaceidx)
408 {
409 struct usbd_interface *ifc = &dev->ud_ifaces[ifaceidx];
410
411 memset(ifc, 0, sizeof(*ifc));
412
413 ifc->ui_dev = dev;
414 ifc->ui_idesc = NULL;
415 ifc->ui_index = 0;
416 ifc->ui_altindex = 0;
417 ifc->ui_endpoints = NULL;
418 ifc->ui_busy = 0;
419 }
420
421 static void
422 usbd_iface_fini(struct usbd_device *dev, int ifaceidx)
423 {
424 struct usbd_interface *ifc __diagused = &dev->ud_ifaces[ifaceidx];
425
426 KASSERT(ifc->ui_dev == dev);
427 KASSERT(ifc->ui_idesc == NULL);
428 KASSERT(ifc->ui_index == 0);
429 KASSERT(ifc->ui_altindex == 0);
430 KASSERT(ifc->ui_endpoints == NULL);
431 KASSERTMSG(ifc->ui_busy == 0, "%"PRId64, ifc->ui_busy);
432 }
433
434 /*
435 * usbd_iface_lock/locked/unlock, usbd_iface_piperef/pipeunref
436 *
437 * We lock the interface while we are setting it, and we acquire a
438 * reference to the interface for each pipe opened on it.
439 *
440 * Setting the interface while pipes are open is forbidden, and
441 * opening pipes while the interface is being set is forbidden.
442 */
443
444 bool
445 usbd_iface_locked(struct usbd_interface *iface)
446 {
447 bool locked;
448
449 mutex_enter(iface->ui_dev->ud_bus->ub_lock);
450 locked = (iface->ui_busy == -1);
451 mutex_exit(iface->ui_dev->ud_bus->ub_lock);
452
453 return locked;
454 }
455
456 static void
457 usbd_iface_exlock(struct usbd_interface *iface)
458 {
459
460 mutex_enter(iface->ui_dev->ud_bus->ub_lock);
461 KASSERTMSG(iface->ui_busy == 0, "interface is not idle,"
462 " busy=%"PRId64, iface->ui_busy);
463 iface->ui_busy = -1;
464 mutex_exit(iface->ui_dev->ud_bus->ub_lock);
465 }
466
467 usbd_status
468 usbd_iface_lock(struct usbd_interface *iface)
469 {
470 usbd_status err;
471
472 mutex_enter(iface->ui_dev->ud_bus->ub_lock);
473 KASSERTMSG(iface->ui_busy != -1, "interface is locked");
474 KASSERTMSG(iface->ui_busy >= 0, "%"PRId64, iface->ui_busy);
475 if (iface->ui_busy) {
476 err = USBD_IN_USE;
477 } else {
478 iface->ui_busy = -1;
479 err = 0;
480 }
481 mutex_exit(iface->ui_dev->ud_bus->ub_lock);
482
483 return err;
484 }
485
486 void
487 usbd_iface_unlock(struct usbd_interface *iface)
488 {
489
490 mutex_enter(iface->ui_dev->ud_bus->ub_lock);
491 KASSERTMSG(iface->ui_busy == -1, "interface is not locked,"
492 " busy=%"PRId64, iface->ui_busy);
493 iface->ui_busy = 0;
494 mutex_exit(iface->ui_dev->ud_bus->ub_lock);
495 }
496
497 usbd_status
498 usbd_iface_piperef(struct usbd_interface *iface)
499 {
500 usbd_status err;
501
502 mutex_enter(iface->ui_dev->ud_bus->ub_lock);
503 KASSERTMSG(iface->ui_busy >= -1, "%"PRId64, iface->ui_busy);
504 if (iface->ui_busy == -1) {
505 err = USBD_IN_USE;
506 } else {
507 iface->ui_busy++;
508 err = 0;
509 }
510 mutex_exit(iface->ui_dev->ud_bus->ub_lock);
511
512 return err;
513 }
514
515 void
516 usbd_iface_pipeunref(struct usbd_interface *iface)
517 {
518
519 mutex_enter(iface->ui_dev->ud_bus->ub_lock);
520 KASSERTMSG(iface->ui_busy != -1, "interface is locked");
521 KASSERTMSG(iface->ui_busy != 0, "interface not in use");
522 KASSERTMSG(iface->ui_busy >= 1, "%"PRId64, iface->ui_busy);
523 iface->ui_busy--;
524 mutex_exit(iface->ui_dev->ud_bus->ub_lock);
525 }
526
527 usbd_status
528 usbd_fill_iface_data(struct usbd_device *dev, int ifaceidx, int altidx)
529 {
530 USBHIST_FUNC();
531 USBHIST_CALLARGS(usbdebug, "ifaceidx=%jd altidx=%jd",
532 ifaceidx, altidx, 0, 0);
533 struct usbd_interface *ifc = &dev->ud_ifaces[ifaceidx];
534 usb_descriptor_t *desc;
535 usb_interface_descriptor_t *idesc;
536 usb_endpoint_descriptor_t *ed;
537 struct usbd_endpoint *endpoints;
538 char *p, *end;
539 int endpt, nendpt;
540
541 KASSERT(ifc->ui_dev == dev);
542 KASSERT(usbd_iface_locked(ifc));
543
544 idesc = usbd_find_idesc(dev->ud_cdesc, ifaceidx, altidx);
545 if (idesc == NULL)
546 return USBD_INVAL;
547
548 nendpt = idesc->bNumEndpoints;
549 DPRINTFN(4, "found idesc nendpt=%jd", nendpt, 0, 0, 0);
550 if (nendpt != 0) {
551 endpoints = kmem_alloc(nendpt * sizeof(struct usbd_endpoint),
552 KM_SLEEP);
553 } else
554 endpoints = NULL;
555
556 p = (char *)idesc + idesc->bLength;
557 end = (char *)dev->ud_cdesc + UGETW(dev->ud_cdesc->wTotalLength);
558 KASSERTMSG((char *)dev->ud_cdesc <= (char *)idesc, "cdesc=%p idesc=%p",
559 dev->ud_cdesc, idesc);
560 KASSERTMSG((char *)idesc < end, "idesc=%p end=%p", idesc, end);
561 for (endpt = 0; endpt < nendpt; endpt++) {
562 DPRINTFN(10, "endpt=%jd", endpt, 0, 0, 0);
563 for (; end - p >= sizeof(*desc); p += desc->bLength) {
564 desc = (usb_descriptor_t *)p;
565 DPRINTFN(10, "p=%#jx end=%#jx len=%jd type=%jd",
566 (uintptr_t)p, (uintptr_t)end, desc->bLength,
567 desc->bDescriptorType);
568 if (desc->bLength < sizeof(*desc)) {
569 printf("%s: bad descriptor: too short\n",
570 __func__);
571 goto bad;
572 } else if (desc->bLength > end - p) {
573 printf("%s: bad descriptor: too long\n",
574 __func__);
575 goto bad;
576 } else if (desc->bDescriptorType == UDESC_INTERFACE) {
577 printf("%s: bad descriptor: iface desc\n",
578 __func__);
579 goto bad;
580 }
581 if (desc->bLength >= USB_ENDPOINT_DESCRIPTOR_SIZE &&
582 desc->bDescriptorType == UDESC_ENDPOINT) {
583 ed = (usb_endpoint_descriptor_t *)p;
584 goto found;
585 }
586 }
587 printf("%s: no desc found\n", __func__);
588 goto bad;
589 found:
590 endpoints[endpt].ue_edesc = ed;
591 if (dev->ud_speed == USB_SPEED_HIGH) {
592 u_int mps;
593 /* Control and bulk endpoints have max packet limits. */
594 switch (UE_GET_XFERTYPE(ed->bmAttributes)) {
595 case UE_CONTROL:
596 mps = USB_2_MAX_CTRL_PACKET;
597 goto check;
598 case UE_BULK:
599 mps = USB_2_MAX_BULK_PACKET;
600 check:
601 if (UGETW(ed->wMaxPacketSize) != mps) {
602 USETW(ed->wMaxPacketSize, mps);
603 #ifdef DIAGNOSTIC
604 printf("usbd_fill_iface_data: bad max "
605 "packet size\n");
606 #endif
607 }
608 break;
609 default:
610 break;
611 }
612 }
613 endpoints[endpt].ue_refcnt = 0;
614 endpoints[endpt].ue_toggle = 0;
615 KASSERTMSG(end - p >= ed->bLength, "p=%p end=%p length=%u",
616 p, end, ed->bLength);
617 p += ed->bLength;
618 }
619 #undef ed
620
621 /* Success! Free the old endpoints and commit the changes. */
622 if (ifc->ui_endpoints) {
623 kmem_free(ifc->ui_endpoints, (sizeof(ifc->ui_endpoints[0]) *
624 ifc->ui_idesc->bNumEndpoints));
625 }
626
627 ifc->ui_idesc = idesc;
628 ifc->ui_index = ifaceidx;
629 ifc->ui_altindex = altidx;
630 ifc->ui_endpoints = endpoints;
631
632 return USBD_NORMAL_COMPLETION;
633
634 bad:
635 if (endpoints)
636 kmem_free(endpoints, nendpt * sizeof(struct usbd_endpoint));
637 return USBD_INVAL;
638 }
639
640 Static void
641 usbd_free_iface_data(struct usbd_device *dev, int ifcno)
642 {
643 struct usbd_interface *ifc = &dev->ud_ifaces[ifcno];
644
645 KASSERT(ifc->ui_dev == dev);
646 KASSERT(ifc->ui_idesc != NULL);
647 KASSERT(usbd_iface_locked(ifc));
648
649 if (ifc->ui_endpoints) {
650 int nendpt = ifc->ui_idesc->bNumEndpoints;
651 size_t sz = nendpt * sizeof(struct usbd_endpoint);
652 kmem_free(ifc->ui_endpoints, sz);
653 ifc->ui_endpoints = NULL;
654 }
655
656 ifc->ui_altindex = 0;
657 ifc->ui_index = 0;
658 ifc->ui_idesc = NULL;
659 }
660
661 usbd_status
662 usbd_set_config_no(struct usbd_device *dev, int no, int msg)
663 {
664 USBHIST_FUNC(); USBHIST_CALLARGS(usbdebug, "%jd", no, 0, 0, 0);
665 usb_config_descriptor_t cd;
666 usbd_status err;
667 int index;
668
669 if (no == USB_UNCONFIG_NO)
670 return usbd_set_config_index(dev, USB_UNCONFIG_INDEX, msg);
671
672 /* Figure out what config index to use. */
673 for (index = 0; index < dev->ud_ddesc.bNumConfigurations; index++) {
674 err = usbd_get_config_desc(dev, index, &cd);
675 if (err)
676 return err;
677 if (cd.bConfigurationValue == no)
678 return usbd_set_config_index(dev, index, msg);
679 }
680 return USBD_INVAL;
681 }
682
683 usbd_status
684 usbd_set_config_index(struct usbd_device *dev, int index, int msg)
685 {
686 USBHIST_FUNC();
687 USBHIST_CALLARGS(usbdebug, "dev=%#jx index=%jd",
688 (uintptr_t)dev, index, 0, 0);
689 usb_config_descriptor_t cd, *cdp;
690 usb_bos_descriptor_t *bdp = NULL;
691 usbd_status err;
692 int i, ifcidx, nifc, len, selfpowered, power;
693
694
695 if (index >= dev->ud_ddesc.bNumConfigurations &&
696 index != USB_UNCONFIG_INDEX) {
697 /* panic? */
698 printf("usbd_set_config_index: illegal index\n");
699 return USBD_INVAL;
700 }
701
702 /* XXX check that all interfaces are idle */
703 if (dev->ud_config != USB_UNCONFIG_NO) {
704 DPRINTF("free old config", 0, 0, 0, 0);
705 /* Free all configuration data structures. */
706 nifc = dev->ud_cdesc->bNumInterface;
707 for (ifcidx = 0; ifcidx < nifc; ifcidx++) {
708 usbd_iface_exlock(&dev->ud_ifaces[ifcidx]);
709 usbd_free_iface_data(dev, ifcidx);
710 usbd_iface_unlock(&dev->ud_ifaces[ifcidx]);
711 usbd_iface_fini(dev, ifcidx);
712 }
713 kmem_free(dev->ud_ifaces, nifc * sizeof(struct usbd_interface));
714 kmem_free(dev->ud_cdesc, UGETW(dev->ud_cdesc->wTotalLength));
715 if (dev->ud_bdesc != NULL)
716 kmem_free(dev->ud_bdesc,
717 UGETW(dev->ud_bdesc->wTotalLength));
718 dev->ud_ifaces = NULL;
719 dev->ud_cdesc = NULL;
720 dev->ud_bdesc = NULL;
721 dev->ud_config = USB_UNCONFIG_NO;
722 }
723
724 if (index == USB_UNCONFIG_INDEX) {
725 /* We are unconfiguring the device, so leave unallocated. */
726 DPRINTF("set config 0", 0, 0, 0, 0);
727 err = usbd_set_config(dev, USB_UNCONFIG_NO);
728 if (err) {
729 DPRINTF("setting config=0 failed, err = %jd", err,
730 0, 0, 0);
731 }
732 return err;
733 }
734
735 /* Get the short descriptor. */
736 err = usbd_get_config_desc(dev, index, &cd);
737 if (err) {
738 DPRINTF("get_config_desc=%jd", err, 0, 0, 0);
739 return err;
740 }
741 len = UGETW(cd.wTotalLength);
742 if (len < USB_CONFIG_DESCRIPTOR_SIZE) {
743 DPRINTF("empty short descriptor", 0, 0, 0, 0);
744 return USBD_INVAL;
745 }
746 cdp = kmem_alloc(len, KM_SLEEP);
747
748 /* Get the full descriptor. Try a few times for slow devices. */
749 for (i = 0; i < 3; i++) {
750 err = usbd_get_desc(dev, UDESC_CONFIG, index, len, cdp);
751 if (!err)
752 break;
753 usbd_delay_ms(dev, 200);
754 }
755 if (err) {
756 DPRINTF("get_desc=%jd", err, 0, 0, 0);
757 goto bad;
758 }
759 if (cdp->bDescriptorType != UDESC_CONFIG) {
760 DPRINTF("bad desc %jd", cdp->bDescriptorType, 0, 0, 0);
761 err = USBD_INVAL;
762 goto bad;
763 }
764 if (UGETW(cdp->wTotalLength) != UGETW(cd.wTotalLength)) {
765 DPRINTF("bad len %jd", UGETW(cdp->wTotalLength), 0, 0, 0);
766 err = USBD_INVAL;
767 goto bad;
768 }
769
770 if (USB_IS_SS(dev->ud_speed)) {
771 usb_bos_descriptor_t bd;
772
773 /* get short bos desc */
774 err = usbd_get_bos_desc(dev, index, &bd);
775 if (!err) {
776 int blen = UGETW(bd.wTotalLength);
777 if (blen < USB_BOS_DESCRIPTOR_SIZE) {
778 DPRINTF("empty bos descriptor", 0, 0, 0, 0);
779 err = USBD_INVAL;
780 goto bad;
781 }
782 bdp = kmem_alloc(blen, KM_SLEEP);
783
784 /* Get the full desc */
785 for (i = 0; i < 3; i++) {
786 err = usbd_get_desc(dev, UDESC_BOS, index, blen,
787 bdp);
788 if (!err)
789 break;
790 usbd_delay_ms(dev, 200);
791 }
792 if (err || bdp->bDescriptorType != UDESC_BOS ||
793 UGETW(bdp->wTotalLength) != UGETW(bd.wTotalLength)) {
794 DPRINTF("error %jd or bad desc %jd", err,
795 bdp->bDescriptorType, 0, 0);
796 kmem_free(bdp, blen);
797 bdp = NULL;
798 }
799 }
800 }
801 dev->ud_bdesc = bdp;
802
803 /*
804 * Figure out if the device is self or bus powered.
805 */
806 #if 0 /* XXX various devices don't report the power state correctly */
807 selfpowered = 0;
808 err = usbd_get_device_status(dev, &ds);
809 if (!err && (UGETW(ds.wStatus) & UDS_SELF_POWERED))
810 selfpowered = 1;
811 #endif
812 /*
813 * Use the power state in the configuration we are going
814 * to set. This doesn't necessarily reflect the actual
815 * power state of the device; the driver can control this
816 * by choosing the appropriate configuration.
817 */
818 selfpowered = !!(cdp->bmAttributes & UC_SELF_POWERED);
819
820 DPRINTF("addr %jd cno=%jd attr=0x%02jx, selfpowered=%jd",
821 dev->ud_addr, cdp->bConfigurationValue, cdp->bmAttributes,
822 selfpowered);
823 DPRINTF("max power=%jd", cdp->bMaxPower * 2, 0, 0, 0);
824
825 /* Check if we have enough power. */
826 #if 0 /* this is a no-op, see above */
827 if ((cdp->bmAttributes & UC_SELF_POWERED) && !selfpowered) {
828 if (msg)
829 printf("%s: device addr %d (config %d): "
830 "can't set self powered configuration\n",
831 device_xname(dev->ud_bus->bdev), dev->ud_addr,
832 cdp->bConfigurationValue);
833 err = USBD_NO_POWER;
834 goto bad;
835 }
836 #endif
837 #ifdef USB_DEBUG
838 if (dev->ud_powersrc == NULL) {
839 DPRINTF("No power source?", 0, 0, 0, 0);
840 err = USBD_IOERROR;
841 goto bad;
842 }
843 #endif
844 power = cdp->bMaxPower * 2;
845 if (power > dev->ud_powersrc->up_power) {
846 DPRINTF("power exceeded %jd %jd", power,
847 dev->ud_powersrc->up_power, 0, 0);
848 /* XXX print nicer message. */
849 if (msg)
850 printf("%s: device addr %d (config %d) exceeds power "
851 "budget, %d mA > %d mA\n",
852 device_xname(dev->ud_bus->ub_usbctl), dev->ud_addr,
853 cdp->bConfigurationValue,
854 power, dev->ud_powersrc->up_power);
855 err = USBD_NO_POWER;
856 goto bad;
857 }
858 dev->ud_power = power;
859 dev->ud_selfpowered = selfpowered;
860
861 /* Set the actual configuration value. */
862 DPRINTF("set config %jd", cdp->bConfigurationValue, 0, 0, 0);
863 err = usbd_set_config(dev, cdp->bConfigurationValue);
864 if (err) {
865 DPRINTF("setting config=%jd failed, error=%jd",
866 cdp->bConfigurationValue, err, 0, 0);
867 goto bad;
868 }
869
870 /* Allocate and fill interface data. */
871 nifc = cdp->bNumInterface;
872 if (nifc == 0) {
873 DPRINTF("no interfaces", 0, 0, 0, 0);
874 err = USBD_INVAL;
875 goto bad;
876 }
877 dev->ud_ifaces = kmem_alloc(nifc * sizeof(struct usbd_interface),
878 KM_SLEEP);
879 DPRINTFN(5, "dev=%#jx cdesc=%#jx", (uintptr_t)dev, (uintptr_t)cdp,
880 0, 0);
881 dev->ud_cdesc = cdp;
882 dev->ud_config = cdp->bConfigurationValue;
883 for (ifcidx = 0; ifcidx < nifc; ifcidx++) {
884 usbd_iface_init(dev, ifcidx);
885 usbd_iface_exlock(&dev->ud_ifaces[ifcidx]);
886 err = usbd_fill_iface_data(dev, ifcidx, 0);
887 usbd_iface_unlock(&dev->ud_ifaces[ifcidx]);
888 if (err) {
889 while (--ifcidx >= 0) {
890 usbd_iface_exlock(&dev->ud_ifaces[ifcidx]);
891 usbd_free_iface_data(dev, ifcidx);
892 usbd_iface_unlock(&dev->ud_ifaces[ifcidx]);
893 usbd_iface_fini(dev, ifcidx);
894 }
895 kmem_free(dev->ud_ifaces,
896 nifc * sizeof(struct usbd_interface));
897 dev->ud_ifaces = NULL;
898 goto bad;
899 }
900 }
901
902 return USBD_NORMAL_COMPLETION;
903
904 bad:
905 /* XXX Use usbd_set_config() to reset the config? */
906 /* XXX Should we forbid USB_UNCONFIG_NO from bConfigurationValue? */
907 dev->ud_config = USB_UNCONFIG_NO;
908 KASSERT(dev->ud_ifaces == NULL);
909 kmem_free(cdp, len);
910 dev->ud_cdesc = NULL;
911 if (bdp != NULL) {
912 kmem_free(bdp, UGETW(bdp->wTotalLength));
913 dev->ud_bdesc = NULL;
914 }
915 return err;
916 }
917
918 /* XXX add function for alternate settings */
919
920 usbd_status
921 usbd_setup_pipe(struct usbd_device *dev, struct usbd_interface *iface,
922 struct usbd_endpoint *ep, int ival, struct usbd_pipe **pipe)
923 {
924 return usbd_setup_pipe_flags(dev, iface, ep, ival, pipe, 0);
925 }
926
927 usbd_status
928 usbd_setup_pipe_flags(struct usbd_device *dev, struct usbd_interface *iface,
929 struct usbd_endpoint *ep, int ival, struct usbd_pipe **pipe, uint8_t flags)
930 {
931 USBHIST_FUNC();
932 USBHIST_CALLARGS(usbdebug, "dev=%#jx addr=%jd iface=%#jx ep=%#jx",
933 (uintptr_t)dev, dev->ud_addr, (uintptr_t)iface, (uintptr_t)ep);
934 struct usbd_pipe *p = NULL;
935 bool ep_acquired = false;
936 usbd_status err;
937
938 /* Block exclusive use of the endpoint by later pipes. */
939 err = usbd_endpoint_acquire(dev, ep, flags & USBD_EXCLUSIVE_USE);
940 if (err)
941 goto out;
942 ep_acquired = true;
943
944 p = kmem_alloc(dev->ud_bus->ub_pipesize, KM_SLEEP);
945 DPRINTFN(1, "pipe=%#jx", (uintptr_t)p, 0, 0, 0);
946 p->up_dev = dev;
947 p->up_iface = iface;
948 p->up_endpoint = ep;
949 p->up_intrxfer = NULL;
950 p->up_running = 0;
951 p->up_aborting = 0;
952 p->up_serialise = true;
953 p->up_repeat = 0;
954 p->up_interval = ival;
955 p->up_flags = flags;
956 SIMPLEQ_INIT(&p->up_queue);
957 p->up_callingxfer = NULL;
958 cv_init(&p->up_callingcv, "usbpipecb");
959 p->up_abortlwp = NULL;
960
961 err = dev->ud_bus->ub_methods->ubm_open(p);
962 if (err) {
963 DPRINTF("endpoint=%#jx failed, error=%jd",
964 (uintptr_t)ep->ue_edesc->bEndpointAddress, err, 0, 0);
965 goto out;
966 }
967
968 KASSERT(p->up_methods->upm_start || p->up_serialise == false);
969
970 usb_init_task(&p->up_async_task, usbd_clear_endpoint_stall_task, p,
971 USB_TASKQ_MPSAFE);
972 DPRINTFN(1, "pipe=%#jx", (uintptr_t)p, 0, 0, 0);
973 *pipe = p;
974 p = NULL; /* handed off to caller */
975 ep_acquired = false; /* handed off to pipe */
976 err = USBD_NORMAL_COMPLETION;
977
978 out: if (p) {
979 KASSERT(p->up_abortlwp == NULL);
980 KASSERT(p->up_callingxfer == NULL);
981 cv_destroy(&p->up_callingcv);
982 kmem_free(p, dev->ud_bus->ub_pipesize);
983 }
984 if (ep_acquired)
985 usbd_endpoint_release(dev, ep);
986 return err;
987 }
988
989 usbd_status
990 usbd_endpoint_acquire(struct usbd_device *dev, struct usbd_endpoint *ep,
991 int flags)
992 {
993 usbd_status err;
994
995 mutex_enter(dev->ud_bus->ub_lock);
996 if (ep->ue_refcnt == INT_MAX) {
997 err = USBD_IN_USE; /* XXX rule out or switch to 64-bit */
998 } else if ((flags & USBD_EXCLUSIVE_USE) && ep->ue_refcnt) {
999 err = USBD_IN_USE;
1000 } else {
1001 ep->ue_refcnt++;
1002 err = 0;
1003 }
1004 mutex_exit(dev->ud_bus->ub_lock);
1005
1006 return err;
1007 }
1008
1009 void
1010 usbd_endpoint_release(struct usbd_device *dev, struct usbd_endpoint *ep)
1011 {
1012
1013 mutex_enter(dev->ud_bus->ub_lock);
1014 KASSERT(ep->ue_refcnt);
1015 ep->ue_refcnt--;
1016 mutex_exit(dev->ud_bus->ub_lock);
1017 }
1018
1019 /* Abort and close the device control pipe. */
1020 void
1021 usbd_kill_pipe(struct usbd_pipe *pipe)
1022 {
1023
1024 usbd_abort_pipe(pipe);
1025 usbd_close_pipe(pipe);
1026 }
1027
1028 int
1029 usbd_getnewaddr(struct usbd_bus *bus)
1030 {
1031 int addr;
1032
1033 for (addr = 1; addr < USB_MAX_DEVICES; addr++) {
1034 size_t dindex = usb_addr2dindex(addr);
1035 if (bus->ub_devices[dindex] == NULL)
1036 return addr;
1037 }
1038 return -1;
1039 }
1040
1041 usbd_status
1042 usbd_attach_roothub(device_t parent, struct usbd_device *dev)
1043 {
1044 struct usb_attach_arg uaa;
1045 usb_device_descriptor_t *dd = &dev->ud_ddesc;
1046 device_t dv;
1047
1048 uaa.uaa_device = dev;
1049 uaa.uaa_usegeneric = 0;
1050 uaa.uaa_port = 0;
1051 uaa.uaa_vendor = UGETW(dd->idVendor);
1052 uaa.uaa_product = UGETW(dd->idProduct);
1053 uaa.uaa_release = UGETW(dd->bcdDevice);
1054 uaa.uaa_class = dd->bDeviceClass;
1055 uaa.uaa_subclass = dd->bDeviceSubClass;
1056 uaa.uaa_proto = dd->bDeviceProtocol;
1057
1058 KERNEL_LOCK(1, curlwp);
1059 dv = config_found(parent, &uaa, NULL,
1060 CFARGS(.iattr = "usbroothubif"));
1061 KERNEL_UNLOCK_ONE(curlwp);
1062 if (dv) {
1063 dev->ud_subdevs = kmem_alloc(sizeof(dv), KM_SLEEP);
1064 dev->ud_subdevs[0] = dv;
1065 dev->ud_subdevlen = 1;
1066 }
1067 return USBD_NORMAL_COMPLETION;
1068 }
1069
1070 static void
1071 usbd_properties(device_t dv, struct usbd_device *dev)
1072 {
1073 usb_device_descriptor_t *dd = &dev->ud_ddesc;
1074 prop_dictionary_t dict = device_properties(dv);
1075 int class, subclass, release, proto, vendor, product;
1076
1077 class = dd->bDeviceClass;
1078 subclass = dd->bDeviceSubClass;
1079 release = UGETW(dd->bcdDevice);
1080 proto = dd->bDeviceProtocol;
1081 vendor = UGETW(dd->idVendor);
1082 product = UGETW(dd->idProduct);
1083
1084 prop_dictionary_set_uint8(dict, "class", class);
1085 prop_dictionary_set_uint8(dict, "subclass", subclass);
1086 prop_dictionary_set_uint16(dict, "release", release);
1087 prop_dictionary_set_uint8(dict, "proto", proto);
1088 prop_dictionary_set_uint16(dict, "vendor-id", vendor);
1089 prop_dictionary_set_uint16(dict, "product-id", product);
1090
1091 if (dev->ud_vendor) {
1092 prop_dictionary_set_string(dict,
1093 "vendor-string", dev->ud_vendor);
1094 }
1095 if (dev->ud_product) {
1096 prop_dictionary_set_string(dict,
1097 "product-string", dev->ud_product);
1098 }
1099 if (dev->ud_serial) {
1100 prop_dictionary_set_string(dict,
1101 "serialnumber", dev->ud_serial);
1102 }
1103 }
1104
1105 static usbd_status
1106 usbd_attachwholedevice(device_t parent, struct usbd_device *dev, int port,
1107 int usegeneric)
1108 {
1109 struct usb_attach_arg uaa;
1110 usb_device_descriptor_t *dd = &dev->ud_ddesc;
1111 device_t dv;
1112 int dlocs[USBDEVIFCF_NLOCS];
1113
1114 KASSERT(usb_in_event_thread(parent));
1115
1116 uaa.uaa_device = dev;
1117 uaa.uaa_usegeneric = usegeneric;
1118 uaa.uaa_port = port;
1119 uaa.uaa_vendor = UGETW(dd->idVendor);
1120 uaa.uaa_product = UGETW(dd->idProduct);
1121 uaa.uaa_release = UGETW(dd->bcdDevice);
1122 uaa.uaa_class = dd->bDeviceClass;
1123 uaa.uaa_subclass = dd->bDeviceSubClass;
1124 uaa.uaa_proto = dd->bDeviceProtocol;
1125
1126 dlocs[USBDEVIFCF_PORT] = uaa.uaa_port;
1127 dlocs[USBDEVIFCF_VENDOR] = uaa.uaa_vendor;
1128 dlocs[USBDEVIFCF_PRODUCT] = uaa.uaa_product;
1129 dlocs[USBDEVIFCF_RELEASE] = uaa.uaa_release;
1130 /* the rest is historical ballast */
1131 dlocs[USBDEVIFCF_CONFIGURATION] = -1;
1132 dlocs[USBDEVIFCF_INTERFACE] = -1;
1133
1134 config_pending_incr(parent);
1135
1136 KERNEL_LOCK(1, curlwp);
1137 dv = config_found(parent, &uaa, usbd_print,
1138 CFARGS(.submatch = config_stdsubmatch,
1139 .iattr = "usbdevif",
1140 .locators = dlocs));
1141 KERNEL_UNLOCK_ONE(curlwp);
1142 if (dv) {
1143 dev->ud_subdevs = kmem_alloc(sizeof(dv), KM_SLEEP);
1144 dev->ud_subdevs[0] = dv;
1145 dev->ud_subdevlen = 1;
1146 dev->ud_nifaces_claimed = 1; /* XXX */
1147 usbd_properties(dv, dev);
1148 }
1149 config_pending_decr(parent);
1150 return USBD_NORMAL_COMPLETION;
1151 }
1152
1153 static usbd_status
1154 usbd_attachinterfaces(device_t parent, struct usbd_device *dev,
1155 int port, const int *locators)
1156 {
1157 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
1158 struct usbif_attach_arg uiaa;
1159 int ilocs[USBIFIFCF_NLOCS];
1160 usb_device_descriptor_t *dd = &dev->ud_ddesc;
1161 int nifaces;
1162 struct usbd_interface **ifaces;
1163 int i, j, loc;
1164 device_t dv;
1165
1166 KASSERT(usb_in_event_thread(parent));
1167
1168 nifaces = dev->ud_cdesc->bNumInterface;
1169 ifaces = kmem_zalloc(nifaces * sizeof(*ifaces), KM_SLEEP);
1170 for (i = 0; i < nifaces; i++) {
1171 if (!dev->ud_subdevs[i]) {
1172 ifaces[i] = &dev->ud_ifaces[i];
1173 }
1174 DPRINTF("interface %jd %#jx", i, (uintptr_t)ifaces[i], 0, 0);
1175 }
1176
1177
1178 uiaa.uiaa_device = dev;
1179 uiaa.uiaa_port = port;
1180 uiaa.uiaa_vendor = UGETW(dd->idVendor);
1181 uiaa.uiaa_product = UGETW(dd->idProduct);
1182 uiaa.uiaa_release = UGETW(dd->bcdDevice);
1183 uiaa.uiaa_configno = dev->ud_cdesc->bConfigurationValue;
1184 uiaa.uiaa_ifaces = ifaces;
1185 uiaa.uiaa_nifaces = nifaces;
1186 ilocs[USBIFIFCF_PORT] = uiaa.uiaa_port;
1187 ilocs[USBIFIFCF_VENDOR] = uiaa.uiaa_vendor;
1188 ilocs[USBIFIFCF_PRODUCT] = uiaa.uiaa_product;
1189 ilocs[USBIFIFCF_RELEASE] = uiaa.uiaa_release;
1190 ilocs[USBIFIFCF_CONFIGURATION] = uiaa.uiaa_configno;
1191
1192 for (i = 0; i < nifaces; i++) {
1193 if (!ifaces[i]) {
1194 DPRINTF("interface %jd claimed", i, 0, 0, 0);
1195 continue; /* interface already claimed */
1196 }
1197 uiaa.uiaa_iface = ifaces[i];
1198 uiaa.uiaa_class = ifaces[i]->ui_idesc->bInterfaceClass;
1199 uiaa.uiaa_subclass = ifaces[i]->ui_idesc->bInterfaceSubClass;
1200 uiaa.uiaa_proto = ifaces[i]->ui_idesc->bInterfaceProtocol;
1201 uiaa.uiaa_ifaceno = ifaces[i]->ui_idesc->bInterfaceNumber;
1202
1203 DPRINTF("searching for interface %jd...", i, 0, 0, 0);
1204 DPRINTF("class %jx subclass %jx proto %jx ifaceno %jd",
1205 uiaa.uiaa_class, uiaa.uiaa_subclass, uiaa.uiaa_proto,
1206 uiaa.uiaa_ifaceno);
1207 ilocs[USBIFIFCF_INTERFACE] = uiaa.uiaa_ifaceno;
1208 if (locators != NULL) {
1209 loc = locators[USBIFIFCF_CONFIGURATION];
1210 if (loc != USBIFIFCF_CONFIGURATION_DEFAULT &&
1211 loc != uiaa.uiaa_configno)
1212 continue;
1213 loc = locators[USBIFIFCF_INTERFACE];
1214 if (loc != USBIFIFCF_INTERFACE_DEFAULT &&
1215 loc != uiaa.uiaa_ifaceno)
1216 continue;
1217 }
1218 KERNEL_LOCK(1, curlwp);
1219 dv = config_found(parent, &uiaa, usbd_ifprint,
1220 CFARGS(.submatch = config_stdsubmatch,
1221 .iattr = "usbifif",
1222 .locators = ilocs));
1223 KERNEL_UNLOCK_ONE(curlwp);
1224 if (!dv)
1225 continue;
1226
1227 usbd_properties(dv, dev);
1228
1229 /* claim */
1230 ifaces[i] = NULL;
1231 /* account for ifaces claimed by the driver behind our back */
1232 for (j = 0; j < nifaces; j++) {
1233
1234 if (!ifaces[j] && !dev->ud_subdevs[j]) {
1235 DPRINTF("interface %jd claimed behind our back",
1236 j, 0, 0, 0);
1237 dev->ud_subdevs[j] = dv;
1238 dev->ud_nifaces_claimed++;
1239 }
1240 }
1241 }
1242
1243 kmem_free(ifaces, nifaces * sizeof(*ifaces));
1244 return USBD_NORMAL_COMPLETION;
1245 }
1246
1247 usbd_status
1248 usbd_probe_and_attach(device_t parent, struct usbd_device *dev,
1249 int port, int addr)
1250 {
1251 USBHIST_FUNC();
1252 USBHIST_CALLARGS(usbdebug, "trying device specific drivers", 0, 0, 0, 0);
1253 usb_device_descriptor_t *dd = &dev->ud_ddesc;
1254 int confi, nifaces;
1255 usbd_status err;
1256
1257 KASSERT(usb_in_event_thread(parent));
1258
1259 /* First try with device specific drivers. */
1260 err = usbd_attachwholedevice(parent, dev, port, 0);
1261 if (dev->ud_nifaces_claimed || err)
1262 return err;
1263 DPRINTF("no device specific driver found", 0, 0, 0, 0);
1264
1265 DPRINTF("looping over %jd configurations", dd->bNumConfigurations,
1266 0, 0, 0);
1267 for (confi = 0; confi < dd->bNumConfigurations; confi++) {
1268 DPRINTFN(1, "trying config idx=%jd", confi, 0, 0, 0);
1269 err = usbd_set_config_index(dev, confi, 1);
1270 if (err) {
1271 DPRINTF("port %jd, set config at addr %jd failed, "
1272 "error=%jd", port, addr, err, 0);
1273 printf("%s: port %d, set config at addr %d failed\n",
1274 device_xname(parent), port, addr);
1275 return err;
1276 }
1277 nifaces = dev->ud_cdesc->bNumInterface;
1278 dev->ud_subdevs = kmem_zalloc(nifaces * sizeof(device_t),
1279 KM_SLEEP);
1280 dev->ud_subdevlen = nifaces;
1281
1282 err = usbd_attachinterfaces(parent, dev, port, NULL);
1283
1284 if (dev->ud_subdevs && dev->ud_nifaces_claimed == 0) {
1285 kmem_free(dev->ud_subdevs,
1286 dev->ud_subdevlen * sizeof(device_t));
1287 dev->ud_subdevs = 0;
1288 dev->ud_subdevlen = 0;
1289 }
1290 if (dev->ud_nifaces_claimed || err)
1291 return err;
1292 }
1293 /* No interfaces were attached in any of the configurations. */
1294
1295 if (dd->bNumConfigurations > 1) /* don't change if only 1 config */
1296 usbd_set_config_index(dev, 0, 0);
1297
1298 DPRINTF("no interface drivers found", 0, 0, 0, 0);
1299
1300 /* Finally try the generic driver. */
1301 err = usbd_attachwholedevice(parent, dev, port, 1);
1302
1303 /*
1304 * The generic attach failed, but leave the device as it is.
1305 * We just did not find any drivers, that's all. The device is
1306 * fully operational and not harming anyone.
1307 */
1308 DPRINTF("generic attach failed", 0, 0, 0, 0);
1309
1310 return USBD_NORMAL_COMPLETION;
1311 }
1312
1313 /**
1314 * Called from uhub_rescan(). usbd_new_device() for the target dev must be
1315 * called before calling this.
1316 */
1317 usbd_status
1318 usbd_reattach_device(device_t parent, struct usbd_device *dev,
1319 int port, const int *locators)
1320 {
1321 int i, loc;
1322
1323 USBHIST_FUNC();
1324 USBHIST_CALLARGS(usbdebug, "uhub%jd port=%jd",
1325 device_unit(parent), port, 0, 0);
1326
1327 KASSERT(usb_in_event_thread(parent));
1328
1329 if (locators != NULL) {
1330 loc = locators[USBIFIFCF_PORT];
1331 if (loc != USBIFIFCF_PORT_DEFAULT && loc != port)
1332 return USBD_NORMAL_COMPLETION;
1333 loc = locators[USBIFIFCF_VENDOR];
1334 if (loc != USBIFIFCF_VENDOR_DEFAULT &&
1335 loc != UGETW(dev->ud_ddesc.idVendor))
1336 return USBD_NORMAL_COMPLETION;
1337 loc = locators[USBIFIFCF_PRODUCT];
1338 if (loc != USBIFIFCF_PRODUCT_DEFAULT &&
1339 loc != UGETW(dev->ud_ddesc.idProduct))
1340 return USBD_NORMAL_COMPLETION;
1341 loc = locators[USBIFIFCF_RELEASE];
1342 if (loc != USBIFIFCF_RELEASE_DEFAULT &&
1343 loc != UGETW(dev->ud_ddesc.bcdDevice))
1344 return USBD_NORMAL_COMPLETION;
1345 }
1346 if (dev->ud_subdevlen == 0) {
1347 /* XXX: check USBIFIFCF_CONFIGURATION and
1348 * USBIFIFCF_INTERFACE too */
1349 return usbd_probe_and_attach(parent, dev, port, dev->ud_addr);
1350 } else if (dev->ud_subdevlen != dev->ud_cdesc->bNumInterface) {
1351 /* device-specific or generic driver is already attached. */
1352 return USBD_NORMAL_COMPLETION;
1353 }
1354 /* Does the device have unconfigured interfaces? */
1355 for (i = 0; i < dev->ud_subdevlen; i++) {
1356 if (dev->ud_subdevs[i] == NULL) {
1357 break;
1358 }
1359 }
1360 if (i >= dev->ud_subdevlen)
1361 return USBD_NORMAL_COMPLETION;
1362 return usbd_attachinterfaces(parent, dev, port, locators);
1363 }
1364
1365 /*
1366 * Called when a new device has been put in the powered state,
1367 * but not yet in the addressed state.
1368 * Get initial descriptor, set the address, get full descriptor,
1369 * and attach a driver.
1370 */
1371 usbd_status
1372 usbd_new_device(device_t parent, struct usbd_bus *bus, int depth, int speed,
1373 int port, struct usbd_port *up)
1374 {
1375 USBHIST_FUNC();
1376 USBHIST_CALLARGS(usbdebug, "bus=%#jx port=%jd depth=%jd speed=%jd",
1377 (uintptr_t)bus, port, depth, speed);
1378 struct usbd_device *dev, *adev;
1379 struct usbd_device *hub;
1380 usb_device_descriptor_t *dd;
1381 usb_port_status_t ps;
1382 usbd_status err;
1383 int addr;
1384 int i;
1385 int p;
1386
1387 KASSERT(usb_in_event_thread(parent));
1388
1389 if (bus->ub_methods->ubm_newdev != NULL)
1390 return (bus->ub_methods->ubm_newdev)(parent, bus, depth, speed,
1391 port, up);
1392
1393 addr = usbd_getnewaddr(bus);
1394 if (addr < 0) {
1395 printf("%s: No free USB addresses, new device ignored.\n",
1396 device_xname(bus->ub_usbctl));
1397 return USBD_NO_ADDR;
1398 }
1399
1400 dev = kmem_zalloc(sizeof(*dev), KM_SLEEP);
1401 dev->ud_bus = bus;
1402
1403 /* Set up default endpoint handle. */
1404 dev->ud_ep0.ue_edesc = &dev->ud_ep0desc;
1405
1406 /* Set up default endpoint descriptor. */
1407 dev->ud_ep0desc.bLength = USB_ENDPOINT_DESCRIPTOR_SIZE;
1408 dev->ud_ep0desc.bDescriptorType = UDESC_ENDPOINT;
1409 dev->ud_ep0desc.bEndpointAddress = USB_CONTROL_ENDPOINT;
1410 dev->ud_ep0desc.bmAttributes = UE_CONTROL;
1411 /*
1412 * temporary, will be fixed after first descriptor fetch
1413 * (which uses 64 bytes so it shouldn't be less),
1414 * highspeed devices must support 64 byte packets anyway
1415 */
1416 if (speed == USB_SPEED_HIGH || speed == USB_SPEED_FULL)
1417 USETW(dev->ud_ep0desc.wMaxPacketSize, 64);
1418 else
1419 USETW(dev->ud_ep0desc.wMaxPacketSize, USB_MAX_IPACKET);
1420
1421 dev->ud_ep0desc.bInterval = 0;
1422
1423 /* doesn't matter, just don't leave it uninitialized */
1424 dev->ud_ep0.ue_toggle = 0;
1425
1426 dev->ud_quirks = &usbd_no_quirk;
1427 dev->ud_addr = USB_START_ADDR;
1428 dev->ud_ddesc.bMaxPacketSize = 0;
1429 dev->ud_depth = depth;
1430 dev->ud_powersrc = up;
1431 dev->ud_myhub = up->up_parent;
1432
1433 up->up_dev = dev;
1434
1435 /* Locate port on upstream high speed hub */
1436 for (adev = dev, hub = up->up_parent;
1437 hub != NULL && hub->ud_speed != USB_SPEED_HIGH;
1438 adev = hub, hub = hub->ud_myhub)
1439 ;
1440 if (hub) {
1441 for (p = 1; p <= hub->ud_hub->uh_hubdesc.bNbrPorts; p++) {
1442 if (hub->ud_hub->uh_ports[p - 1].up_dev == adev) {
1443 dev->ud_myhsport =
1444 &hub->ud_hub->uh_ports[p - 1];
1445 goto found;
1446 }
1447 }
1448 panic("usbd_new_device: cannot find HS port");
1449 found:
1450 DPRINTFN(1, "high speed port %jd", p, 0, 0, 0);
1451 } else {
1452 dev->ud_myhsport = NULL;
1453 }
1454 dev->ud_speed = speed;
1455 dev->ud_langid = USBD_NOLANG;
1456 dev->ud_cookie.cookie = ++usb_cookie_no;
1457
1458 /* Establish the default pipe. */
1459 err = usbd_setup_pipe_flags(dev, 0, &dev->ud_ep0, USBD_DEFAULT_INTERVAL,
1460 &dev->ud_pipe0, USBD_MPSAFE);
1461 if (err) {
1462 usbd_remove_device(dev, up);
1463 return err;
1464 }
1465
1466 dd = &dev->ud_ddesc;
1467 /* Try a few times in case the device is slow (i.e. outside specs.) */
1468 for (i = 0; i < 10; i++) {
1469 /* Get the first 8 bytes of the device descriptor. */
1470 err = usbd_get_initial_ddesc(dev, dd);
1471 if (!err)
1472 break;
1473 /*
1474 * The root hub can never fail to give the initial descriptor,
1475 * but assert it just in case.
1476 */
1477 KASSERT(up->up_parent);
1478 usbd_delay_ms(dev, 200);
1479 if ((i & 3) == 3)
1480 usbd_reset_port(up->up_parent, port, &ps);
1481 }
1482 if (err) {
1483 DPRINTF("addr=%jd, getting first desc failed: %jd", addr, err,
1484 0, 0);
1485 usbd_remove_device(dev, up);
1486 return err;
1487 }
1488
1489 /* Windows resets the port here, do likewise */
1490 if (up->up_parent)
1491 usbd_reset_port(up->up_parent, port, &ps);
1492
1493 if (speed == USB_SPEED_HIGH) {
1494 /* Max packet size must be 64 (sec 5.5.3). */
1495 if (dd->bMaxPacketSize != USB_2_MAX_CTRL_PACKET) {
1496 #ifdef DIAGNOSTIC
1497 printf("usbd_new_device: addr=%d bad max packet "
1498 "size=%d. adjusting to %d.\n",
1499 addr, dd->bMaxPacketSize, USB_2_MAX_CTRL_PACKET);
1500 #endif
1501 dd->bMaxPacketSize = USB_2_MAX_CTRL_PACKET;
1502 }
1503 }
1504
1505 DPRINTF("adding unit addr=%jd, rev=%02jx, class=%jd, subclass=%jd",
1506 addr, UGETW(dd->bcdUSB), dd->bDeviceClass, dd->bDeviceSubClass);
1507 DPRINTF("protocol=%jd, maxpacket=%jd, len=%jd, speed=%jd",
1508 dd->bDeviceProtocol, dd->bMaxPacketSize, dd->bLength, dev->ud_speed);
1509
1510 if (dd->bDescriptorType != UDESC_DEVICE) {
1511 /* Illegal device descriptor */
1512 DPRINTF("illegal descriptor %jd", dd->bDescriptorType, 0, 0, 0);
1513 usbd_remove_device(dev, up);
1514 return USBD_INVAL;
1515 }
1516
1517 if (dd->bLength < USB_DEVICE_DESCRIPTOR_SIZE) {
1518 DPRINTF("bad length %jd", dd->bLength, 0, 0, 0);
1519 usbd_remove_device(dev, up);
1520 return USBD_INVAL;
1521 }
1522
1523 USETW(dev->ud_ep0desc.wMaxPacketSize, dd->bMaxPacketSize);
1524
1525 /* Re-establish the default pipe with the new MPS. */
1526 usbd_kill_pipe(dev->ud_pipe0);
1527 dev->ud_pipe0 = NULL;
1528 err = usbd_setup_pipe_flags(dev, 0, &dev->ud_ep0, USBD_DEFAULT_INTERVAL,
1529 &dev->ud_pipe0, USBD_MPSAFE);
1530 if (err) {
1531 DPRINTF("setup default pipe failed err %jd", err, 0, 0, 0);
1532 usbd_remove_device(dev, up);
1533 return err;
1534 }
1535
1536 /* Set the address */
1537 DPRINTFN(5, "setting device address=%jd", addr, 0, 0, 0);
1538 err = usbd_set_address(dev, addr);
1539 if (err) {
1540 DPRINTF("set address %jd failed, err = %jd", addr, err, 0, 0);
1541 err = USBD_SET_ADDR_FAILED;
1542 usbd_remove_device(dev, up);
1543 return err;
1544 }
1545
1546 /* Allow device time to set new address */
1547 usbd_delay_ms(dev, USB_SET_ADDRESS_SETTLE);
1548 dev->ud_addr = addr; /* new device address now */
1549 bus->ub_devices[usb_addr2dindex(addr)] = dev;
1550
1551 /* Re-establish the default pipe with the new address. */
1552 usbd_kill_pipe(dev->ud_pipe0);
1553 dev->ud_pipe0 = NULL;
1554 err = usbd_setup_pipe_flags(dev, 0, &dev->ud_ep0, USBD_DEFAULT_INTERVAL,
1555 &dev->ud_pipe0, USBD_MPSAFE);
1556 if (err) {
1557 DPRINTF("setup default pipe failed, err = %jd", err, 0, 0, 0);
1558 usbd_remove_device(dev, up);
1559 return err;
1560 }
1561
1562 err = usbd_reload_device_desc(dev);
1563 if (err) {
1564 DPRINTF("addr=%jd, getting full desc failed, err = %jd", addr,
1565 err, 0, 0);
1566 usbd_remove_device(dev, up);
1567 return err;
1568 }
1569
1570 /* Assume 100mA bus powered for now. Changed when configured. */
1571 dev->ud_power = USB_MIN_POWER;
1572 dev->ud_selfpowered = 0;
1573
1574 DPRINTF("new dev (addr %jd), dev=%#jx, parent=%#jx",
1575 addr, (uintptr_t)dev, (uintptr_t)parent, 0);
1576
1577 usbd_get_device_strings(dev);
1578
1579 usbd_add_dev_event(USB_EVENT_DEVICE_ATTACH, dev);
1580
1581 if (port == 0) { /* root hub */
1582 KASSERT(addr == 1);
1583 usbd_attach_roothub(parent, dev);
1584 return USBD_NORMAL_COMPLETION;
1585 }
1586
1587 err = usbd_probe_and_attach(parent, dev, port, addr);
1588 if (err) {
1589 usbd_remove_device(dev, up);
1590 return err;
1591 }
1592
1593 return USBD_NORMAL_COMPLETION;
1594 }
1595
1596 usbd_status
1597 usbd_reload_device_desc(struct usbd_device *dev)
1598 {
1599 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
1600 usb_device_descriptor_t *udd = &dev->ud_ddesc;
1601 usbd_status err;
1602
1603 /* Get the full device descriptor. */
1604 err = usbd_get_device_desc(dev, udd);
1605 if (err)
1606 return err;
1607 if (udd->bDescriptorType != UDESC_DEVICE)
1608 return USBD_INVAL;
1609 if (udd->bLength < USB_DEVICE_DESCRIPTOR_SIZE)
1610 return USBD_INVAL;
1611
1612 DPRINTFN(15, "bLength %5ju", udd->bLength, 0, 0, 0);
1613 DPRINTFN(15, "bDescriptorType %5ju", udd->bDescriptorType, 0, 0, 0);
1614 DPRINTFN(15, "bcdUSB %2jx.%02jx", udd->bcdUSB[1],
1615 udd->bcdUSB[0], 0, 0);
1616 DPRINTFN(15, "bDeviceClass %5ju", udd->bDeviceClass, 0, 0, 0);
1617 DPRINTFN(15, "bDeviceSubClass %5ju", udd->bDeviceSubClass, 0, 0, 0);
1618 DPRINTFN(15, "bDeviceProtocol %5ju", udd->bDeviceProtocol, 0, 0, 0);
1619 DPRINTFN(15, "bMaxPacketSize0 %5ju", udd->bMaxPacketSize, 0, 0, 0);
1620 DPRINTFN(15, "idVendor 0x%02jx 0x%02jx",
1621 udd->idVendor[0],
1622 udd->idVendor[1], 0, 0);
1623 DPRINTFN(15, "idProduct 0x%02jx 0x%02jx",
1624 udd->idProduct[0],
1625 udd->idProduct[1], 0, 0);
1626 DPRINTFN(15, "bcdDevice %2jx.%02jx", udd->bcdDevice[1],
1627 udd->bcdDevice[0], 0, 0);
1628 DPRINTFN(15, "iManufacturer %5ju", udd->iManufacturer, 0, 0, 0);
1629 DPRINTFN(15, "iProduct %5ju", udd->iProduct, 0, 0, 0);
1630 DPRINTFN(15, "iSerial %5ju", udd->iSerialNumber, 0, 0, 0);
1631 DPRINTFN(15, "bNumConfigurations %5ju", udd->bNumConfigurations, 0, 0,
1632 0);
1633
1634 /* Figure out what's wrong with this device. */
1635 dev->ud_quirks = usbd_find_quirk(udd);
1636
1637 return USBD_NORMAL_COMPLETION;
1638 }
1639
1640 void
1641 usbd_remove_device(struct usbd_device *dev, struct usbd_port *up)
1642 {
1643
1644 USBHIST_FUNC();
1645 USBHIST_CALLARGS(usbdebug, "dev %#jx up %#jx",
1646 (uintptr_t)dev, (uintptr_t)up, 0, 0);
1647
1648 if (dev->ud_pipe0 != NULL)
1649 usbd_kill_pipe(dev->ud_pipe0);
1650 up->up_dev = NULL;
1651 dev->ud_bus->ub_devices[usb_addr2dindex(dev->ud_addr)] = NULL;
1652
1653 if (dev->ud_vendor != NULL) {
1654 kmem_free(dev->ud_vendor, USB_MAX_ENCODED_STRING_LEN);
1655 }
1656 if (dev->ud_product != NULL) {
1657 kmem_free(dev->ud_product, USB_MAX_ENCODED_STRING_LEN);
1658 }
1659 if (dev->ud_serial != NULL) {
1660 kmem_free(dev->ud_serial, USB_MAX_ENCODED_STRING_LEN);
1661 }
1662 kmem_free(dev, sizeof(*dev));
1663 }
1664
1665 int
1666 usbd_print(void *aux, const char *pnp)
1667 {
1668 struct usb_attach_arg *uaa = aux;
1669
1670 if (pnp) {
1671 #define USB_DEVINFO 1024
1672 char *devinfo;
1673 if (!uaa->uaa_usegeneric)
1674 return QUIET;
1675 devinfo = kmem_alloc(USB_DEVINFO, KM_SLEEP);
1676 usbd_devinfo(uaa->uaa_device, 1, devinfo, USB_DEVINFO);
1677 aprint_normal("%s, %s", devinfo, pnp);
1678 kmem_free(devinfo, USB_DEVINFO);
1679 }
1680 aprint_normal(" port %d", uaa->uaa_port);
1681 #if 0
1682 /*
1683 * It gets very crowded with these locators on the attach line.
1684 * They are not really needed since they are printed in the clear
1685 * by each driver.
1686 */
1687 if (uaa->uaa_vendor != UHUB_UNK_VENDOR)
1688 aprint_normal(" vendor 0x%04x", uaa->uaa_vendor);
1689 if (uaa->uaa_product != UHUB_UNK_PRODUCT)
1690 aprint_normal(" product 0x%04x", uaa->uaa_product);
1691 if (uaa->uaa_release != UHUB_UNK_RELEASE)
1692 aprint_normal(" release 0x%04x", uaa->uaa_release);
1693 #endif
1694 return UNCONF;
1695 }
1696
1697 int
1698 usbd_ifprint(void *aux, const char *pnp)
1699 {
1700 struct usbif_attach_arg *uiaa = aux;
1701
1702 if (pnp)
1703 return QUIET;
1704 aprint_normal(" port %d", uiaa->uiaa_port);
1705 aprint_normal(" configuration %d", uiaa->uiaa_configno);
1706 aprint_normal(" interface %d", uiaa->uiaa_ifaceno);
1707 #if 0
1708 /*
1709 * It gets very crowded with these locators on the attach line.
1710 * They are not really needed since they are printed in the clear
1711 * by each driver.
1712 */
1713 if (uaa->uaa_vendor != UHUB_UNK_VENDOR)
1714 aprint_normal(" vendor 0x%04x", uaa->uaa_vendor);
1715 if (uaa->uaa_product != UHUB_UNK_PRODUCT)
1716 aprint_normal(" product 0x%04x", uaa->uaa_product);
1717 if (uaa->uaa_release != UHUB_UNK_RELEASE)
1718 aprint_normal(" release 0x%04x", uaa->uaa_release);
1719 #endif
1720 return UNCONF;
1721 }
1722
1723 void
1724 usbd_fill_deviceinfo(struct usbd_device *dev, struct usb_device_info *di,
1725 int usedev)
1726 {
1727 struct usbd_port *p;
1728 int i, j, err;
1729
1730 di->udi_bus = device_unit(dev->ud_bus->ub_usbctl);
1731 di->udi_addr = dev->ud_addr;
1732 di->udi_cookie = dev->ud_cookie;
1733 usbd_devinfo_vp(dev, di->udi_vendor, sizeof(di->udi_vendor),
1734 di->udi_product, sizeof(di->udi_product), usedev, 1);
1735 usbd_printBCD(di->udi_release, sizeof(di->udi_release),
1736 UGETW(dev->ud_ddesc.bcdDevice));
1737 if (usedev) {
1738 usbd_status uerr = usbd_get_string(dev,
1739 dev->ud_ddesc.iSerialNumber, di->udi_serial);
1740 if (uerr != USBD_NORMAL_COMPLETION) {
1741 di->udi_serial[0] = '\0';
1742 } else {
1743 usbd_trim_spaces(di->udi_serial);
1744 }
1745 } else {
1746 di->udi_serial[0] = '\0';
1747 if (dev->ud_serial) {
1748 strlcpy(di->udi_serial, dev->ud_serial,
1749 sizeof(di->udi_serial));
1750 }
1751 }
1752
1753 di->udi_vendorNo = UGETW(dev->ud_ddesc.idVendor);
1754 di->udi_productNo = UGETW(dev->ud_ddesc.idProduct);
1755 di->udi_releaseNo = UGETW(dev->ud_ddesc.bcdDevice);
1756 di->udi_class = dev->ud_ddesc.bDeviceClass;
1757 di->udi_subclass = dev->ud_ddesc.bDeviceSubClass;
1758 di->udi_protocol = dev->ud_ddesc.bDeviceProtocol;
1759 di->udi_config = dev->ud_config;
1760 di->udi_power = dev->ud_selfpowered ? 0 : dev->ud_power;
1761 di->udi_speed = dev->ud_speed;
1762
1763 if (dev->ud_subdevlen > 0) {
1764 for (i = 0, j = 0; i < dev->ud_subdevlen &&
1765 j < USB_MAX_DEVNAMES; i++) {
1766 if (!dev->ud_subdevs[i])
1767 continue;
1768 strncpy(di->udi_devnames[j],
1769 device_xname(dev->ud_subdevs[i]), USB_MAX_DEVNAMELEN);
1770 di->udi_devnames[j][USB_MAX_DEVNAMELEN-1] = '\0';
1771 j++;
1772 }
1773 } else {
1774 j = 0;
1775 }
1776 for (/* j is set */; j < USB_MAX_DEVNAMES; j++)
1777 di->udi_devnames[j][0] = 0; /* empty */
1778
1779 if (!dev->ud_hub) {
1780 di->udi_nports = 0;
1781 return;
1782 }
1783
1784 const int nports = dev->ud_hub->uh_hubdesc.bNbrPorts;
1785 for (i = 1; i <= __arraycount(di->udi_ports) && i <= nports; i++) {
1786 p = &dev->ud_hub->uh_ports[i - 1];
1787 if (p->up_dev)
1788 err = p->up_dev->ud_addr;
1789 else {
1790 const int s = UGETW(p->up_status.wPortStatus);
1791 const bool sshub_p = USB_IS_SS(dev->ud_speed);
1792 if (s & UPS_PORT_ENABLED)
1793 err = USB_PORT_ENABLED;
1794 else if (s & UPS_SUSPEND)
1795 err = USB_PORT_SUSPENDED;
1796 /*
1797 * Note: UPS_PORT_POWER_SS is available only
1798 * on 3.x, and UPS_PORT_POWER is available
1799 * only on 2.0 or 1.1.
1800 */
1801 else if (sshub_p && (s & UPS_PORT_POWER_SS))
1802 err = USB_PORT_POWERED;
1803 else if (!sshub_p && (s & UPS_PORT_POWER))
1804 err = USB_PORT_POWERED;
1805 else
1806 err = USB_PORT_DISABLED;
1807 }
1808 di->udi_ports[i - 1] = err;
1809 }
1810 di->udi_nports = nports;
1811 }
1812
1813 void
1814 usb_free_device(struct usbd_device *dev)
1815 {
1816 int ifcidx, nifc;
1817
1818 if (dev->ud_pipe0 != NULL)
1819 usbd_kill_pipe(dev->ud_pipe0);
1820 if (dev->ud_ifaces != NULL) {
1821 nifc = dev->ud_cdesc->bNumInterface;
1822 for (ifcidx = 0; ifcidx < nifc; ifcidx++) {
1823 usbd_iface_exlock(&dev->ud_ifaces[ifcidx]);
1824 usbd_free_iface_data(dev, ifcidx);
1825 usbd_iface_unlock(&dev->ud_ifaces[ifcidx]);
1826 usbd_iface_fini(dev, ifcidx);
1827 }
1828 kmem_free(dev->ud_ifaces,
1829 nifc * sizeof(struct usbd_interface));
1830 }
1831 if (dev->ud_cdesc != NULL)
1832 kmem_free(dev->ud_cdesc, UGETW(dev->ud_cdesc->wTotalLength));
1833 if (dev->ud_bdesc != NULL)
1834 kmem_free(dev->ud_bdesc, UGETW(dev->ud_bdesc->wTotalLength));
1835 if (dev->ud_subdevlen > 0) {
1836 kmem_free(dev->ud_subdevs,
1837 dev->ud_subdevlen * sizeof(device_t));
1838 dev->ud_subdevlen = 0;
1839 }
1840 if (dev->ud_vendor) {
1841 kmem_free(dev->ud_vendor, USB_MAX_ENCODED_STRING_LEN);
1842 }
1843 if (dev->ud_product) {
1844 kmem_free(dev->ud_product, USB_MAX_ENCODED_STRING_LEN);
1845 }
1846 if (dev->ud_serial) {
1847 kmem_free(dev->ud_serial, USB_MAX_ENCODED_STRING_LEN);
1848 }
1849 kmem_free(dev, sizeof(*dev));
1850 }
1851
1852 /*
1853 * The general mechanism for detaching drivers works as follows: Each
1854 * driver is responsible for maintaining a reference count on the
1855 * number of outstanding references to its softc (e.g. from
1856 * processing hanging in a read or write). The detach method of the
1857 * driver decrements this counter and flags in the softc that the
1858 * driver is dying and then wakes any sleepers. It then sleeps on the
1859 * softc. Each place that can sleep must maintain the reference
1860 * count. When the reference count drops to -1 (0 is the normal value
1861 * of the reference count) then a wakeup on the softc is performed
1862 * signaling to the detach waiter that all references are gone.
1863 */
1864
1865 /*
1866 * Called from process context when we discover that a port has
1867 * been disconnected.
1868 */
1869 int
1870 usb_disconnect_port(struct usbd_port *up, device_t parent, int flags)
1871 {
1872 struct usbd_device *dev = up->up_dev;
1873 device_t subdev;
1874 char subdevname[16];
1875 const char *hubname = device_xname(parent);
1876 int i, rc;
1877
1878 USBHIST_FUNC();
1879 USBHIST_CALLARGS(usbdebug, "up=%#jx dev=%#jx port=%jd",
1880 (uintptr_t)up, (uintptr_t)dev, up->up_portno, 0);
1881
1882 if (dev == NULL) {
1883 return 0;
1884 }
1885
1886 usbd_suspend_pipe(dev->ud_pipe0);
1887 if (dev->ud_subdevlen > 0) {
1888 DPRINTFN(3, "disconnect subdevs", 0, 0, 0, 0);
1889 for (i = 0; i < dev->ud_subdevlen; i++) {
1890 if ((subdev = dev->ud_subdevs[i]) == NULL)
1891 continue;
1892 strlcpy(subdevname, device_xname(subdev),
1893 sizeof(subdevname));
1894 KERNEL_LOCK(1, curlwp);
1895 rc = config_detach(subdev, flags);
1896 KERNEL_UNLOCK_ONE(curlwp);
1897 if (rc != 0)
1898 return rc;
1899 printf("%s: at %s", subdevname, hubname);
1900 if (up->up_portno != 0)
1901 printf(" port %d", up->up_portno);
1902 printf(" (addr %d) disconnected\n", dev->ud_addr);
1903 }
1904 KASSERT(!dev->ud_nifaces_claimed);
1905 }
1906
1907 mutex_enter(dev->ud_bus->ub_lock);
1908 dev->ud_bus->ub_devices[usb_addr2dindex(dev->ud_addr)] = NULL;
1909 up->up_dev = NULL;
1910 mutex_exit(dev->ud_bus->ub_lock);
1911
1912 usbd_add_dev_event(USB_EVENT_DEVICE_DETACH, dev);
1913
1914 usb_free_device(dev);
1915
1916 return 0;
1917 }
1918