usbdi.c revision 1.162.2.9 1 /* $NetBSD: usbdi.c,v 1.162.2.9 2014/12/05 09:37:50 skrll Exp $ */
2
3 /*
4 * Copyright (c) 1998, 2012 The NetBSD Foundation, Inc.
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Lennart Augustsson (lennart (at) augustsson.net) at
9 * Carlstedt Research & Technology and Matthew R. Green (mrg (at) eterna.com.au).
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions and the following disclaimer.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in the
18 * documentation and/or other materials provided with the distribution.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
30 * POSSIBILITY OF SUCH DAMAGE.
31 */
32
33 #include <sys/cdefs.h>
34 __KERNEL_RCSID(0, "$NetBSD: usbdi.c,v 1.162.2.9 2014/12/05 09:37:50 skrll Exp $");
35
36 #ifdef _KERNEL_OPT
37 #include "opt_usb.h"
38 #include "opt_compat_netbsd.h"
39 #endif
40
41 #include "usb_dma.h"
42
43 #include <sys/param.h>
44 #include <sys/systm.h>
45 #include <sys/kernel.h>
46 #include <sys/device.h>
47 #include <sys/kmem.h>
48 #include <sys/proc.h>
49 #include <sys/bus.h>
50 #include <sys/cpu.h>
51
52 #include <dev/usb/usb.h>
53 #include <dev/usb/usbdi.h>
54 #include <dev/usb/usbdi_util.h>
55 #include <dev/usb/usbdivar.h>
56 #include <dev/usb/usb_mem.h>
57 #include <dev/usb/usb_quirks.h>
58 #include <dev/usb/usbhist.h>
59
60 /* UTF-8 encoding stuff */
61 #include <fs/unicode.h>
62
63 extern int usbdebug;
64
65 Static usbd_status usbd_ar_pipe(usbd_pipe_handle);
66 Static void usbd_start_next(usbd_pipe_handle);
67 Static usbd_status usbd_open_pipe_ival
68 (usbd_interface_handle, uint8_t, uint8_t, usbd_pipe_handle *, int);
69
70 static inline int
71 usbd_xfer_isread(usbd_xfer_handle xfer)
72 {
73 if (xfer->ux_rqflags & URQ_REQUEST)
74 return xfer->ux_request.bmRequestType & UT_READ;
75 else
76 return (xfer->ux_pipe->up_endpoint->ue_edesc->bEndpointAddress &
77 UE_DIR_IN);
78 }
79
80 #if defined(USB_DEBUG)
81 void
82 usbd_dump_iface(struct usbd_interface *iface)
83 {
84 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
85
86 USBHIST_LOG(usbdebug, "iface %p\n", iface, 0, 0, 0);
87 if (iface == NULL)
88 return;
89 USBHIST_LOG(usbdebug, " device = %p idesc = %p index = %d",
90 iface->ui_dev, iface->ui_idesc, iface->ui_index, 0);
91 USBHIST_LOG(usbdebug, " altindex=%d priv=%p",
92 iface->ui_altindex, iface->ui_priv, 0, 0);
93 }
94
95 void
96 usbd_dump_device(struct usbd_device *dev)
97 {
98 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
99
100 USBHIST_LOG(usbdebug, "dev = %p", dev, 0, 0, 0);
101 if (dev == NULL)
102 return;
103 USBHIST_LOG(usbdebug, " bus = %p default_pipe = %p",
104 dev->ud_bus, dev->ud_pipe0, 0, 0);
105 USBHIST_LOG(usbdebug, " address = %d config = %d depth = %d ",
106 dev->ud_addr, dev->ud_config, dev->ud_depth, 0);
107 USBHIST_LOG(usbdebug, " speed = %d self_powered = %d "
108 "power = %d langid = %d",
109 dev->ud_speed, dev->ud_selfpowered, dev->ud_power, dev->ud_langid);
110 }
111
112 void
113 usbd_dump_endpoint(struct usbd_endpoint *endp)
114 {
115 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
116
117 USBHIST_LOG(usbdebug, "endp = %p", endp, 0, 0, 0);
118 if (endp == NULL)
119 return;
120 USBHIST_LOG(usbdebug, " edesc = %p refcnt = %d",
121 endp->ue_edesc, endp->ue_refcnt, 0, 0);
122 if (endp->ue_edesc)
123 USBHIST_LOG(usbdebug, " bEndpointAddress=0x%02x",
124 endp->ue_edesc->bEndpointAddress, 0, 0, 0);
125 }
126
127 void
128 usbd_dump_queue(usbd_pipe_handle pipe)
129 {
130 usbd_xfer_handle xfer;
131
132 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
133
134 USBHIST_LOG(usbdebug, "pipe = %p", pipe, 0, 0, 0);
135 SIMPLEQ_FOREACH(xfer, &pipe->up_queue, ux_next) {
136 USBHIST_LOG(usbdebug, " xfer = %p", xfer, 0, 0, 0);
137 }
138 }
139
140 void
141 usbd_dump_pipe(usbd_pipe_handle pipe)
142 {
143 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
144
145 USBHIST_LOG(usbdebug, "pipe = %p", pipe, 0, 0, 0);
146 if (pipe == NULL)
147 return;
148 usbd_dump_iface(pipe->up_iface);
149 usbd_dump_device(pipe->up_dev);
150 usbd_dump_endpoint(pipe->up_endpoint);
151 USBHIST_LOG(usbdebug, "(usbd_dump_pipe)", 0, 0, 0, 0);
152 USBHIST_LOG(usbdebug, " refcnt = %d running = %d aborting = %d",
153 pipe->up_refcnt, pipe->up_running, pipe->up_aborting, 0);
154 USBHIST_LOG(usbdebug, " intrxfer = %p, repeat = %d, interval = %d",
155 pipe->up_intrxfer, pipe->up_repeat, pipe->up_interval, 0);
156 }
157 #endif
158
159 usbd_status
160 usbd_open_pipe(usbd_interface_handle iface, uint8_t address,
161 uint8_t flags, usbd_pipe_handle *pipe)
162 {
163 return (usbd_open_pipe_ival(iface, address, flags, pipe,
164 USBD_DEFAULT_INTERVAL));
165 }
166
167 usbd_status
168 usbd_open_pipe_ival(usbd_interface_handle iface, uint8_t address,
169 uint8_t flags, usbd_pipe_handle *pipe, int ival)
170 {
171 usbd_pipe_handle p;
172 struct usbd_endpoint *ep;
173 usbd_status err;
174 int i;
175
176 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
177
178 USBHIST_LOG(usbdebug, "iface = %p address = 0x%x flags = 0x%x",
179 iface, address, flags, 0);
180
181 for (i = 0; i < iface->ui_idesc->bNumEndpoints; i++) {
182 ep = &iface->ui_endpoints[i];
183 if (ep->ue_edesc == NULL)
184 return USBD_IOERROR;
185 if (ep->ue_edesc->bEndpointAddress == address)
186 goto found;
187 }
188 return USBD_BAD_ADDRESS;
189 found:
190 if ((flags & USBD_EXCLUSIVE_USE) && ep->ue_refcnt != 0)
191 return USBD_IN_USE;
192 err = usbd_setup_pipe_flags(iface->ui_dev, iface, ep, ival, &p, flags);
193 if (err)
194 return err;
195 LIST_INSERT_HEAD(&iface->ui_pipes, p, up_next);
196 *pipe = p;
197 return USBD_NORMAL_COMPLETION;
198 }
199
200 usbd_status
201 usbd_open_pipe_intr(usbd_interface_handle iface, uint8_t address,
202 uint8_t flags, usbd_pipe_handle *pipe,
203 usbd_private_handle priv, void *buffer, uint32_t len,
204 usbd_callback cb, int ival)
205 {
206 usbd_status err;
207 usbd_xfer_handle xfer;
208 usbd_pipe_handle ipipe;
209
210 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
211
212 USBHIST_LOG(usbdebug, "address = 0x%x flags = 0x%x len = %d",
213 address, flags, len, 0);
214
215 err = usbd_open_pipe_ival(iface, address,
216 USBD_EXCLUSIVE_USE | (flags & USBD_MPSAFE),
217 &ipipe, ival);
218 if (err)
219 return err;
220 xfer = usbd_alloc_xfer(iface->ui_dev);
221 if (xfer == NULL) {
222 err = USBD_NOMEM;
223 goto bad1;
224 }
225 usbd_setup_xfer(xfer, ipipe, priv, buffer, len, flags,
226 USBD_NO_TIMEOUT, cb);
227 ipipe->up_intrxfer = xfer;
228 ipipe->up_repeat = 1;
229 err = usbd_transfer(xfer);
230 *pipe = ipipe;
231 if (err != USBD_IN_PROGRESS)
232 goto bad2;
233 return USBD_NORMAL_COMPLETION;
234
235 bad2:
236 ipipe->up_intrxfer = NULL;
237 ipipe->up_repeat = 0;
238 usbd_free_xfer(xfer);
239 bad1:
240 usbd_close_pipe(ipipe);
241 return err;
242 }
243
244 usbd_status
245 usbd_close_pipe(usbd_pipe_handle pipe)
246 {
247
248 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
249
250 #ifdef DIAGNOSTIC
251 if (pipe == NULL) {
252 USBHIST_LOG(usbdebug, "pipe == NULL", 0, 0, 0, 0);
253 return USBD_NORMAL_COMPLETION;
254 }
255 #endif
256
257 usbd_lock_pipe(pipe);
258 if (--pipe->up_refcnt != 0) {
259 usbd_unlock_pipe(pipe);
260 return USBD_NORMAL_COMPLETION;
261 }
262 if (! SIMPLEQ_EMPTY(&pipe->up_queue)) {
263 usbd_unlock_pipe(pipe);
264 return USBD_PENDING_REQUESTS;
265 }
266 LIST_REMOVE(pipe, up_next);
267 pipe->up_endpoint->ue_refcnt--;
268 pipe->up_methods->upm_close(pipe);
269 usbd_unlock_pipe(pipe);
270 if (pipe->up_intrxfer != NULL)
271 usbd_free_xfer(pipe->up_intrxfer);
272 kmem_free(pipe, pipe->up_dev->ud_bus->ub_pipesize);
273 return USBD_NORMAL_COMPLETION;
274 }
275
276 usbd_status
277 usbd_transfer(usbd_xfer_handle xfer)
278 {
279 usbd_pipe_handle pipe = xfer->ux_pipe;
280 usbd_status err;
281 unsigned int size, flags;
282
283 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
284
285 USBHIST_LOG(usbdebug,
286 "xfer = %p, flags = %#x, pipe = %p, running = %d",
287 xfer, xfer->ux_flags, pipe, pipe->up_running);
288
289 #ifdef USB_DEBUG
290 if (usbdebug > 5)
291 usbd_dump_queue(pipe);
292 #endif
293 xfer->ux_done = 0;
294
295 if (pipe->up_aborting) {
296 USBHIST_LOG(usbdebug, "<- done xfer %p, aborting", xfer, 0, 0,
297 0);
298 return USBD_CANCELLED;
299 }
300
301 struct usbd_bus *bus = pipe->up_dev->ud_bus;
302
303 size = xfer->ux_length;
304 flags = xfer->ux_flags;
305
306 /*
307 * isoc transfers are always size == 0, whereas other transfers can
308 * require a URQ_AUTO_BUFFER buffer.
309 *
310 * URQ_AUTO_BUFFER will be removed at some point, i.e. the transfer
311 * should provide the buffer.
312 */
313 if (size != 0) {
314 if (xfer->ux_buf == NULL) {
315 xfer->ux_buf = usbd_alloc_buffer(xfer, size);
316 if (xfer->ux_buf == NULL)
317 return USBD_NOMEM;
318
319 #ifdef DIAGNOSTIC
320 if (xfer->ux_rqflags & URQ_AUTO_BUFFER)
321 printf("usbd_transfer: has old buffer!\n");
322 #endif
323 xfer->ux_rqflags |= URQ_AUTO_BUFFER;
324 }
325 }
326 if (bus->ub_usedma) {
327 /*
328 * Copy data if not using the xfer buffer. isoc transfers
329 * always use DMA buffer, i.e. buffer == NULL
330 */
331 if (xfer->ux_buffer == NULL) {
332 xfer->ux_buffer = xfer->ux_buf;
333 } else if (xfer->ux_buffer != xfer->ux_buf) {
334 memcpy(xfer->ux_buf, xfer->ux_buffer, size);
335 }
336 } else {
337 xfer->ux_buffer = xfer->ux_buf;
338 }
339
340 /* xfer is not valid after the transfer method unless synchronous */
341 err = pipe->up_methods->upm_transfer(xfer);
342 USBHIST_LOG(usbdebug, "<- done transfer %p, err = %d", xfer, err, 0, 0);
343
344 if (err != USBD_IN_PROGRESS && err) {
345 /* The transfer has not been queued, so free buffer. */
346 if (xfer->ux_rqflags & URQ_AUTO_BUFFER) {
347 usbd_free_buffer(xfer);
348 xfer->ux_rqflags &= ~URQ_AUTO_BUFFER;
349 }
350 }
351
352 if (!(flags & USBD_SYNCHRONOUS)) {
353 USBHIST_LOG(usbdebug, "<- done xfer %p, not sync", xfer, 0, 0,
354 0);
355 return err;
356 }
357
358 /* Sync transfer, wait for completion. */
359 if (err != USBD_IN_PROGRESS) {
360 USBHIST_LOG(usbdebug, "<- done xfer %p, not in progress", xfer,
361 0, 0, 0);
362 return err;
363 }
364 usbd_lock_pipe(pipe);
365 while (!xfer->ux_done) {
366 if (pipe->up_dev->ud_bus->ub_usepolling)
367 panic("usbd_transfer: not done");
368 USBHIST_LOG(usbdebug, "<- sleeping on xfer %p", xfer, 0, 0, 0);
369
370 err = 0;
371 if ((flags & USBD_SYNCHRONOUS_SIG) != 0) {
372 err = cv_wait_sig(&xfer->ux_cv, pipe->up_dev->ud_bus->ub_lock);
373 } else {
374 cv_wait(&xfer->ux_cv, pipe->up_dev->ud_bus->ub_lock);
375 }
376 if (err) {
377 if (!xfer->ux_done)
378 pipe->up_methods->upm_abort(xfer);
379 break;
380 }
381 }
382 usbd_unlock_pipe(pipe);
383 return xfer->ux_status;
384 }
385
386 /* Like usbd_transfer(), but waits for completion. */
387 usbd_status
388 usbd_sync_transfer(usbd_xfer_handle xfer)
389 {
390 xfer->ux_flags |= USBD_SYNCHRONOUS;
391 return usbd_transfer(xfer);
392 }
393
394 /* Like usbd_transfer(), but waits for completion and listens for signals. */
395 usbd_status
396 usbd_sync_transfer_sig(usbd_xfer_handle xfer)
397 {
398 xfer->ux_flags |= USBD_SYNCHRONOUS | USBD_SYNCHRONOUS_SIG;
399 return usbd_transfer(xfer);
400 }
401
402 void *
403 usbd_alloc_buffer(usbd_xfer_handle xfer, uint32_t size)
404 {
405
406 KASSERT(xfer->ux_buf == NULL);
407 KASSERT(size != 0);
408 KASSERT(!(xfer->ux_rqflags & URQ_AUTO_BUFFER));
409
410 xfer->ux_bufsize = 0;
411 #if NUSB_DMA > 0
412 struct usbd_bus *bus = xfer->ux_dev->ud_bus;
413
414 if (bus->ub_usedma) {
415 usb_dma_t *dmap = &xfer->ux_dmabuf;
416
417 int err = usb_allocmem_flags(bus, size, 0, dmap, bus->ub_dmaflags);
418 if (err) {
419 return NULL;
420 }
421 xfer->ux_buf = KERNADDR(&xfer->ux_dmabuf, 0);
422 xfer->ux_bufsize = size;
423
424 return xfer->ux_buf;
425 }
426 #endif
427 KASSERT(xfer->ux_dev->ud_bus->ub_usedma == false);
428 xfer->ux_buf = kmem_alloc(size, KM_SLEEP);
429
430 if (xfer->ux_buf != NULL) {
431 xfer->ux_bufsize = size;
432 }
433
434 return xfer->ux_buf;
435 }
436
437 void
438 usbd_free_buffer(usbd_xfer_handle xfer)
439 {
440 KASSERT(xfer->ux_buf != NULL);
441 KASSERT(xfer->ux_bufsize != 0);
442
443 void *buf = xfer->ux_buf;
444 uint32_t size = xfer->ux_bufsize;
445
446 xfer->ux_rqflags &= ~URQ_AUTO_BUFFER;
447 xfer->ux_buf = NULL;
448 xfer->ux_bufsize = 0;
449
450 #if NUSB_DMA > 0
451 struct usbd_bus *bus = xfer->ux_dev->ud_bus;
452
453 if (bus->ub_usedma) {
454 usb_dma_t *dmap = &xfer->ux_dmabuf;
455
456 usb_freemem(bus, dmap);
457 return;
458 }
459 #endif
460 KASSERT(xfer->ux_dev->ud_bus->ub_usedma == false);
461
462 kmem_free(buf, size);
463 }
464
465 void *
466 usbd_get_buffer(usbd_xfer_handle xfer)
467 {
468
469 return xfer->ux_buf;
470 }
471
472 usbd_xfer_handle
473 usbd_alloc_xfer(usbd_device_handle dev)
474 {
475 usbd_xfer_handle xfer;
476
477 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
478
479 ASSERT_SLEEPABLE();
480
481 xfer = dev->ud_bus->ub_methods->ubm_allocx(dev->ud_bus);
482 if (xfer == NULL)
483 return NULL;
484 xfer->ux_dev = dev;
485 callout_init(&xfer->ux_callout, CALLOUT_MPSAFE);
486 cv_init(&xfer->ux_cv, "usbxfer");
487 cv_init(&xfer->ux_hccv, "usbhcxfer");
488
489 USBHIST_LOG(usbdebug, "returns %p", xfer, 0, 0, 0);
490
491 return xfer;
492 }
493
494 usbd_status
495 usbd_free_xfer(usbd_xfer_handle xfer)
496 {
497 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
498
499 USBHIST_LOG(usbdebug, "%p", xfer, 0, 0, 0);
500 if (xfer->ux_buf) {
501 usbd_free_buffer(xfer);
502 }
503 #if defined(DIAGNOSTIC)
504 if (callout_pending(&xfer->ux_callout)) {
505 callout_stop(&xfer->ux_callout);
506 printf("usbd_free_xfer: timeout_handle pending\n");
507 }
508 #endif
509 cv_destroy(&xfer->ux_cv);
510 cv_destroy(&xfer->ux_hccv);
511 xfer->ux_dev->ud_bus->ub_methods->ubm_freex(xfer->ux_dev->ud_bus, xfer);
512 return USBD_NORMAL_COMPLETION;
513 }
514
515 void
516 usbd_setup_xfer(usbd_xfer_handle xfer, usbd_pipe_handle pipe,
517 usbd_private_handle priv, void *buffer, uint32_t length,
518 uint16_t flags, uint32_t timeout,
519 usbd_callback callback)
520 {
521 xfer->ux_pipe = pipe;
522 xfer->ux_priv = priv;
523 xfer->ux_buffer = buffer;
524 xfer->ux_length = length;
525 xfer->ux_actlen = 0;
526 xfer->ux_flags = flags;
527 xfer->ux_timeout = timeout;
528 xfer->ux_status = USBD_NOT_STARTED;
529 xfer->ux_callback = callback;
530 xfer->ux_rqflags &= ~URQ_REQUEST;
531 xfer->ux_nframes = 0;
532 }
533
534 void
535 usbd_setup_default_xfer(usbd_xfer_handle xfer, usbd_device_handle dev,
536 usbd_private_handle priv, uint32_t timeout,
537 usb_device_request_t *req, void *buffer,
538 uint32_t length, uint16_t flags,
539 usbd_callback callback)
540 {
541 xfer->ux_pipe = dev->ud_pipe0;
542 xfer->ux_priv = priv;
543 xfer->ux_buffer = buffer;
544 xfer->ux_length = length;
545 xfer->ux_actlen = 0;
546 xfer->ux_flags = flags;
547 xfer->ux_timeout = timeout;
548 xfer->ux_status = USBD_NOT_STARTED;
549 xfer->ux_callback = callback;
550 xfer->ux_request = *req;
551 xfer->ux_rqflags |= URQ_REQUEST;
552 xfer->ux_nframes = 0;
553 }
554
555 void
556 usbd_setup_isoc_xfer(usbd_xfer_handle xfer, usbd_pipe_handle pipe,
557 usbd_private_handle priv, uint16_t *frlengths,
558 uint32_t nframes, uint16_t flags, usbd_callback callback)
559 {
560 xfer->ux_pipe = pipe;
561 xfer->ux_priv = priv;
562 xfer->ux_buffer = 0;
563 xfer->ux_length = 0;
564 xfer->ux_actlen = 0;
565 xfer->ux_flags = flags;
566 xfer->ux_timeout = USBD_NO_TIMEOUT;
567 xfer->ux_status = USBD_NOT_STARTED;
568 xfer->ux_callback = callback;
569 xfer->ux_rqflags &= ~URQ_REQUEST;
570 xfer->ux_frlengths = frlengths;
571 xfer->ux_nframes = nframes;
572 }
573
574 void
575 usbd_get_xfer_status(usbd_xfer_handle xfer, usbd_private_handle *priv,
576 void **buffer, uint32_t *count, usbd_status *status)
577 {
578 if (priv != NULL)
579 *priv = xfer->ux_priv;
580 if (buffer != NULL)
581 *buffer = xfer->ux_buffer;
582 if (count != NULL)
583 *count = xfer->ux_actlen;
584 if (status != NULL)
585 *status = xfer->ux_status;
586 }
587
588 usb_config_descriptor_t *
589 usbd_get_config_descriptor(usbd_device_handle dev)
590 {
591 #ifdef DIAGNOSTIC
592 if (dev == NULL) {
593 printf("usbd_get_config_descriptor: dev == NULL\n");
594 return NULL;
595 }
596 #endif
597 return dev->ud_cdesc;
598 }
599
600 usb_interface_descriptor_t *
601 usbd_get_interface_descriptor(usbd_interface_handle iface)
602 {
603 #ifdef DIAGNOSTIC
604 if (iface == NULL) {
605 printf("usbd_get_interface_descriptor: dev == NULL\n");
606 return NULL;
607 }
608 #endif
609 return iface->ui_idesc;
610 }
611
612 usb_device_descriptor_t *
613 usbd_get_device_descriptor(usbd_device_handle dev)
614 {
615 return &dev->ud_ddesc;
616 }
617
618 usb_endpoint_descriptor_t *
619 usbd_interface2endpoint_descriptor(usbd_interface_handle iface, uint8_t index)
620 {
621 if (index >= iface->ui_idesc->bNumEndpoints)
622 return NULL;
623 return iface->ui_endpoints[index].ue_edesc;
624 }
625
626 /* Some drivers may wish to abort requests on the default pipe, *
627 * but there is no mechanism for getting a handle on it. */
628 usbd_status
629 usbd_abort_default_pipe(struct usbd_device *device)
630 {
631
632 return usbd_abort_pipe(device->ud_pipe0);
633 }
634
635 usbd_status
636 usbd_abort_pipe(usbd_pipe_handle pipe)
637 {
638 usbd_status err;
639
640 #ifdef DIAGNOSTIC
641 if (pipe == NULL) {
642 printf("usbd_abort_pipe: pipe==NULL\n");
643 return USBD_NORMAL_COMPLETION;
644 }
645 #endif
646 usbd_lock_pipe(pipe);
647 err = usbd_ar_pipe(pipe);
648 usbd_unlock_pipe(pipe);
649 return err;
650 }
651
652 usbd_status
653 usbd_clear_endpoint_stall(usbd_pipe_handle pipe)
654 {
655 usbd_device_handle dev = pipe->up_dev;
656 usb_device_request_t req;
657 usbd_status err;
658
659 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
660
661 /*
662 * Clearing en endpoint stall resets the endpoint toggle, so
663 * do the same to the HC toggle.
664 */
665 pipe->up_methods->upm_cleartoggle(pipe);
666
667 req.bmRequestType = UT_WRITE_ENDPOINT;
668 req.bRequest = UR_CLEAR_FEATURE;
669 USETW(req.wValue, UF_ENDPOINT_HALT);
670 USETW(req.wIndex, pipe->up_endpoint->ue_edesc->bEndpointAddress);
671 USETW(req.wLength, 0);
672 err = usbd_do_request(dev, &req, 0);
673 #if 0
674 XXX should we do this?
675 if (!err) {
676 pipe->state = USBD_PIPE_ACTIVE;
677 /* XXX activate pipe */
678 }
679 #endif
680 return err;
681 }
682
683 void
684 usbd_clear_endpoint_stall_task(void *arg)
685 {
686 usbd_pipe_handle pipe = arg;
687 usbd_device_handle dev = pipe->up_dev;
688 usb_device_request_t req;
689
690 pipe->up_methods->upm_cleartoggle(pipe);
691
692 req.bmRequestType = UT_WRITE_ENDPOINT;
693 req.bRequest = UR_CLEAR_FEATURE;
694 USETW(req.wValue, UF_ENDPOINT_HALT);
695 USETW(req.wIndex, pipe->up_endpoint->ue_edesc->bEndpointAddress);
696 USETW(req.wLength, 0);
697 (void)usbd_do_request(dev, &req, 0);
698 }
699
700 void
701 usbd_clear_endpoint_stall_async(usbd_pipe_handle pipe)
702 {
703
704 usb_add_task(pipe->up_dev, &pipe->up_async_task, USB_TASKQ_DRIVER);
705 }
706
707 void
708 usbd_clear_endpoint_toggle(usbd_pipe_handle pipe)
709 {
710 pipe->up_methods->upm_cleartoggle(pipe);
711 }
712
713 usbd_status
714 usbd_endpoint_count(usbd_interface_handle iface, uint8_t *count)
715 {
716 #ifdef DIAGNOSTIC
717 if (iface == NULL || iface->ui_idesc == NULL) {
718 printf("usbd_endpoint_count: NULL pointer\n");
719 return USBD_INVAL;
720 }
721 #endif
722 *count = iface->ui_idesc->bNumEndpoints;
723 return USBD_NORMAL_COMPLETION;
724 }
725
726 usbd_status
727 usbd_interface_count(usbd_device_handle dev, uint8_t *count)
728 {
729 if (dev->ud_cdesc == NULL)
730 return USBD_NOT_CONFIGURED;
731 *count = dev->ud_cdesc->bNumInterface;
732 return USBD_NORMAL_COMPLETION;
733 }
734
735 void
736 usbd_interface2device_handle(usbd_interface_handle iface,
737 usbd_device_handle *dev)
738 {
739 *dev = iface->ui_dev;
740 }
741
742 usbd_status
743 usbd_device2interface_handle(usbd_device_handle dev,
744 uint8_t ifaceno, usbd_interface_handle *iface)
745 {
746 if (dev->ud_cdesc == NULL)
747 return USBD_NOT_CONFIGURED;
748 if (ifaceno >= dev->ud_cdesc->bNumInterface)
749 return USBD_INVAL;
750 *iface = &dev->ud_ifaces[ifaceno];
751 return USBD_NORMAL_COMPLETION;
752 }
753
754 usbd_device_handle
755 usbd_pipe2device_handle(usbd_pipe_handle pipe)
756 {
757 return pipe->up_dev;
758 }
759
760 /* XXXX use altno */
761 usbd_status
762 usbd_set_interface(usbd_interface_handle iface, int altidx)
763 {
764 usb_device_request_t req;
765 usbd_status err;
766 void *endpoints;
767
768 if (LIST_FIRST(&iface->ui_pipes) != 0)
769 return USBD_IN_USE;
770
771 endpoints = iface->ui_endpoints;
772 err = usbd_fill_iface_data(iface->ui_dev, iface->ui_index, altidx);
773 if (err)
774 return err;
775
776 /* new setting works, we can free old endpoints */
777 if (endpoints != NULL) {
778 int nendpt = iface->ui_idesc->bNumEndpoints;
779 kmem_free(endpoints, nendpt * sizeof(struct usbd_endpoint));
780 }
781
782 #ifdef DIAGNOSTIC
783 if (iface->ui_idesc == NULL) {
784 printf("usbd_set_interface: NULL pointer\n");
785 return USBD_INVAL;
786 }
787 #endif
788
789 req.bmRequestType = UT_WRITE_INTERFACE;
790 req.bRequest = UR_SET_INTERFACE;
791 USETW(req.wValue, iface->ui_idesc->bAlternateSetting);
792 USETW(req.wIndex, iface->ui_idesc->bInterfaceNumber);
793 USETW(req.wLength, 0);
794 return usbd_do_request(iface->ui_dev, &req, 0);
795 }
796
797 int
798 usbd_get_no_alts(usb_config_descriptor_t *cdesc, int ifaceno)
799 {
800 char *p = (char *)cdesc;
801 char *end = p + UGETW(cdesc->wTotalLength);
802 usb_interface_descriptor_t *d;
803 int n;
804
805 for (n = 0; p < end; p += d->bLength) {
806 d = (usb_interface_descriptor_t *)p;
807 if (p + d->bLength <= end &&
808 d->bDescriptorType == UDESC_INTERFACE &&
809 d->bInterfaceNumber == ifaceno)
810 n++;
811 }
812 return n;
813 }
814
815 int
816 usbd_get_interface_altindex(usbd_interface_handle iface)
817 {
818 return iface->ui_altindex;
819 }
820
821 usbd_status
822 usbd_get_interface(usbd_interface_handle iface, uint8_t *aiface)
823 {
824 usb_device_request_t req;
825
826 req.bmRequestType = UT_READ_INTERFACE;
827 req.bRequest = UR_GET_INTERFACE;
828 USETW(req.wValue, 0);
829 USETW(req.wIndex, iface->ui_idesc->bInterfaceNumber);
830 USETW(req.wLength, 1);
831 return usbd_do_request(iface->ui_dev, &req, aiface);
832 }
833
834 /*** Internal routines ***/
835
836 /* Dequeue all pipe operations, called at splusb(). */
837 Static usbd_status
838 usbd_ar_pipe(usbd_pipe_handle pipe)
839 {
840 usbd_xfer_handle xfer;
841
842 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
843
844 KASSERT(mutex_owned(pipe->up_dev->ud_bus->ub_lock));
845
846 USBHIST_LOG(usbdebug, "pipe = %p", pipe, 0, 0, 0);
847 #ifdef USB_DEBUG
848 if (usbdebug > 5)
849 usbd_dump_queue(pipe);
850 #endif
851 pipe->up_repeat = 0;
852 pipe->up_aborting = 1;
853 while ((xfer = SIMPLEQ_FIRST(&pipe->up_queue)) != NULL) {
854 USBHIST_LOG(usbdebug, "pipe = %p xfer = %p (methods = %p)",
855 pipe, xfer, pipe->up_methods, 0);
856 /* Make the HC abort it (and invoke the callback). */
857 pipe->up_methods->upm_abort(xfer);
858 /* XXX only for non-0 usbd_clear_endpoint_stall(pipe); */
859 }
860 pipe->up_aborting = 0;
861 return USBD_NORMAL_COMPLETION;
862 }
863
864 /* Called with USB lock held. */
865 void
866 usb_transfer_complete(usbd_xfer_handle xfer)
867 {
868 usbd_pipe_handle pipe = xfer->ux_pipe;
869 struct usbd_bus *bus = pipe->up_dev->ud_bus;
870 int sync = xfer->ux_flags & USBD_SYNCHRONOUS;
871 int erred = xfer->ux_status == USBD_CANCELLED ||
872 xfer->ux_status == USBD_TIMEOUT;
873 int polling = bus->ub_usepolling;
874 int repeat;
875
876 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
877
878 USBHIST_LOG(usbdebug, "pipe = %p xfer = %p status = %d actlen = %d",
879 pipe, xfer, xfer->ux_status, xfer->ux_actlen);
880
881 KASSERT(polling || mutex_owned(pipe->up_dev->ud_bus->ub_lock));
882
883 #ifdef DIAGNOSTIC
884 if (xfer->ux_state != XFER_ONQU) {
885 printf("usb_transfer_complete: xfer=%p not queued 0x%08x\n",
886 xfer, xfer->ux_state);
887 }
888 #endif
889
890 #ifdef DIAGNOSTIC
891 if (pipe == NULL) {
892 printf("usb_transfer_complete: pipe==0, xfer=%p\n", xfer);
893 return;
894 }
895 #endif
896 repeat = pipe->up_repeat;
897 /* XXXX */
898 if (polling)
899 pipe->up_running = 0;
900
901 if (xfer->ux_buffer != xfer->ux_buf) {
902 /* can only be different for DMA busses */
903 KASSERT(bus->ub_usedma);
904 KDASSERTMSG(xfer->ux_actlen <= xfer->ux_length,
905 "actlen %d length %d",xfer->ux_actlen, xfer->ux_length);
906
907 memcpy(xfer->ux_buffer, xfer->ux_buf, xfer->ux_actlen);
908 }
909
910 /* XXX remove at some point */
911 /* if we allocated the buffer in usbd_transfer() we free it here. */
912 if (xfer->ux_rqflags & URQ_AUTO_BUFFER) {
913 if (!repeat) {
914 usbd_free_buffer(xfer);
915 xfer->ux_rqflags &= ~URQ_AUTO_BUFFER;
916 }
917 }
918
919 if (!repeat) {
920 /* Remove request from queue. */
921
922 KASSERTMSG(!SIMPLEQ_EMPTY(&pipe->up_queue),
923 "pipe %p is empty, but xfer %p wants to complete", pipe,
924 xfer);
925 #ifdef DIAGNOSTIC
926 if (xfer != SIMPLEQ_FIRST(&pipe->up_queue))
927 printf("%s: bad dequeue %p != %p\n", __func__,
928 xfer, SIMPLEQ_FIRST(&pipe->up_queue));
929 xfer->ux_state = XFER_BUSY;
930 #endif
931 SIMPLEQ_REMOVE_HEAD(&pipe->up_queue, ux_next);
932 }
933 USBHIST_LOG(usbdebug, "xfer %p: repeat %d new head = %p",
934 xfer, repeat, SIMPLEQ_FIRST(&pipe->up_queue), 0);
935
936 /* Count completed transfers. */
937 ++pipe->up_dev->ud_bus->ub_stats.uds_requests
938 [pipe->up_endpoint->ue_edesc->bmAttributes & UE_XFERTYPE];
939
940 xfer->ux_done = 1;
941 if (!xfer->ux_status && xfer->ux_actlen < xfer->ux_length &&
942 !(xfer->ux_flags & USBD_SHORT_XFER_OK)) {
943 USBHIST_LOG(usbdebug, "short transfer %d < %d",
944 xfer->ux_actlen, xfer->ux_length, 0, 0);
945 xfer->ux_status = USBD_SHORT_XFER;
946 }
947
948 if (repeat) {
949 USBHIST_LOG(usbdebug, "xfer %p doing callback %p status %x",
950 xfer, xfer->ux_callback, xfer->ux_status, 0);
951 if (xfer->ux_callback) {
952 if (!polling)
953 mutex_exit(pipe->up_dev->ud_bus->ub_lock);
954
955 if (!(pipe->up_flags & USBD_MPSAFE))
956 KERNEL_LOCK(1, curlwp);
957 xfer->ux_callback(xfer, xfer->ux_priv, xfer->ux_status);
958 USBHIST_LOG(usbdebug, "xfer %p doing done %p", xfer,
959 pipe->up_methods->upm_done, 0, 0);
960 if (!(pipe->up_flags & USBD_MPSAFE))
961 KERNEL_UNLOCK_ONE(curlwp);
962
963 if (!polling)
964 mutex_enter(pipe->up_dev->ud_bus->ub_lock);
965 }
966 pipe->up_methods->upm_done(xfer);
967 } else {
968 USBHIST_LOG(usbdebug, "xfer %p doing done %p", xfer,
969 pipe->up_methods->upm_done, 0, 0);
970 pipe->up_methods->upm_done(xfer);
971 USBHIST_LOG(usbdebug, "xfer %p doing callback %p status %x",
972 xfer, xfer->ux_callback, xfer->ux_status, 0);
973 if (xfer->ux_callback) {
974 if (!polling)
975 mutex_exit(pipe->up_dev->ud_bus->ub_lock);
976
977 if (!(pipe->up_flags & USBD_MPSAFE))
978 KERNEL_LOCK(1, curlwp);
979 xfer->ux_callback(xfer, xfer->ux_priv, xfer->ux_status);
980 if (!(pipe->up_flags & USBD_MPSAFE))
981 KERNEL_UNLOCK_ONE(curlwp);
982
983 if (!polling)
984 mutex_enter(pipe->up_dev->ud_bus->ub_lock);
985 }
986 }
987
988 if (sync && !polling) {
989 USBHIST_LOG(usbdebug, "<- done xfer %p, wakeup", xfer, 0, 0, 0);
990 cv_broadcast(&xfer->ux_cv);
991 }
992
993 if (!repeat) {
994 /* XXX should we stop the queue on all errors? */
995 if (erred && pipe->up_iface != NULL) /* not control pipe */
996 pipe->up_running = 0;
997 else
998 usbd_start_next(pipe);
999 }
1000 }
1001
1002 /* Called with USB lock held. */
1003 usbd_status
1004 usb_insert_transfer(usbd_xfer_handle xfer)
1005 {
1006 usbd_pipe_handle pipe = xfer->ux_pipe;
1007 usbd_status err;
1008
1009 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
1010
1011 USBHIST_LOG(usbdebug, "pipe = %p running = %d timeout = %d",
1012 pipe, pipe->up_running, xfer->ux_timeout, 0);
1013
1014 KASSERT(mutex_owned(pipe->up_dev->ud_bus->ub_lock));
1015
1016 #ifdef DIAGNOSTIC
1017 if (xfer->ux_state != XFER_BUSY) {
1018 USBHIST_LOG(usbdebug, "<- done, xfer %p not busy", xfer, 0, 0,
1019 0);
1020 printf("usb_insert_transfer: xfer=%p not busy 0x%08x\n",
1021 xfer, xfer->ux_state);
1022 return USBD_INVAL;
1023 }
1024 xfer->ux_state = XFER_ONQU;
1025 #endif
1026 SIMPLEQ_INSERT_TAIL(&pipe->up_queue, xfer, ux_next);
1027 if (pipe->up_running)
1028 err = USBD_IN_PROGRESS;
1029 else {
1030 pipe->up_running = 1;
1031 err = USBD_NORMAL_COMPLETION;
1032 }
1033 USBHIST_LOG(usbdebug, "<- done xfer %p, err %d", xfer, err, 0, 0);
1034 return err;
1035 }
1036
1037 /* Called with USB lock held. */
1038 void
1039 usbd_start_next(usbd_pipe_handle pipe)
1040 {
1041 usbd_xfer_handle xfer;
1042 usbd_status err;
1043
1044 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
1045
1046 #ifdef DIAGNOSTIC
1047 if (pipe == NULL) {
1048 printf("usbd_start_next: pipe == NULL\n");
1049 return;
1050 }
1051 if (pipe->up_methods == NULL || pipe->up_methods->upm_start == NULL) {
1052 printf("usbd_start_next: pipe=%p no start method\n", pipe);
1053 return;
1054 }
1055 #endif
1056
1057 KASSERT(mutex_owned(pipe->up_dev->ud_bus->ub_lock));
1058
1059 /* Get next request in queue. */
1060 xfer = SIMPLEQ_FIRST(&pipe->up_queue);
1061 USBHIST_LOG(usbdebug, "pipe = %p, xfer = %p", pipe, xfer, 0, 0);
1062 if (xfer == NULL) {
1063 pipe->up_running = 0;
1064 } else {
1065 mutex_exit(pipe->up_dev->ud_bus->ub_lock);
1066 err = pipe->up_methods->upm_start(xfer);
1067 mutex_enter(pipe->up_dev->ud_bus->ub_lock);
1068
1069 if (err != USBD_IN_PROGRESS) {
1070 USBHIST_LOG(usbdebug, "error = %d", err, 0, 0, 0);
1071 pipe->up_running = 0;
1072 /* XXX do what? */
1073 }
1074 }
1075
1076 KASSERT(mutex_owned(pipe->up_dev->ud_bus->ub_lock));
1077 }
1078
1079 usbd_status
1080 usbd_do_request(usbd_device_handle dev, usb_device_request_t *req, void *data)
1081 {
1082 return (usbd_do_request_flags(dev, req, data, 0, 0,
1083 USBD_DEFAULT_TIMEOUT));
1084 }
1085
1086 usbd_status
1087 usbd_do_request_flags(usbd_device_handle dev, usb_device_request_t *req,
1088 void *data, uint16_t flags, int *actlen, uint32_t timo)
1089 {
1090 return (usbd_do_request_flags_pipe(dev, dev->ud_pipe0, req,
1091 data, flags, actlen, timo));
1092 }
1093
1094 usbd_status
1095 usbd_do_request_flags_pipe(usbd_device_handle dev, usbd_pipe_handle pipe,
1096 usb_device_request_t *req, void *data, uint16_t flags, int *actlen,
1097 uint32_t timeout)
1098 {
1099 usbd_xfer_handle xfer;
1100 usbd_status err;
1101
1102 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
1103
1104 ASSERT_SLEEPABLE();
1105
1106 xfer = usbd_alloc_xfer(dev);
1107 if (xfer == NULL)
1108 return USBD_NOMEM;
1109 usbd_setup_default_xfer(xfer, dev, 0, timeout, req,
1110 data, UGETW(req->wLength), flags, 0);
1111 xfer->ux_pipe = pipe;
1112 err = usbd_sync_transfer(xfer);
1113 #if defined(USB_DEBUG) || defined(DIAGNOSTIC)
1114 if (xfer->ux_actlen > xfer->ux_length) {
1115 USBHIST_LOG(usbdebug, "overrun addr = %d type = 0x%02x",
1116 dev->ud_addr, xfer->ux_request.bmRequestType, 0, 0);
1117 USBHIST_LOG(usbdebug, " req = 0x%02x val = %d index = %d",
1118 xfer->ux_request.bRequest, UGETW(xfer->ux_request.wValue),
1119 UGETW(xfer->ux_request.wIndex), 0);
1120 USBHIST_LOG(usbdebug, " rlen = %d length = %d actlen = %d",
1121 UGETW(xfer->ux_request.wLength),
1122 xfer->ux_length, xfer->ux_actlen, 0);
1123 }
1124 #endif
1125 if (actlen != NULL)
1126 *actlen = xfer->ux_actlen;
1127 if (err == USBD_STALLED) {
1128 /*
1129 * The control endpoint has stalled. Control endpoints
1130 * should not halt, but some may do so anyway so clear
1131 * any halt condition.
1132 */
1133 usb_device_request_t treq;
1134 usb_status_t status;
1135 uint16_t s;
1136 usbd_status nerr;
1137
1138 treq.bmRequestType = UT_READ_ENDPOINT;
1139 treq.bRequest = UR_GET_STATUS;
1140 USETW(treq.wValue, 0);
1141 USETW(treq.wIndex, 0);
1142 USETW(treq.wLength, sizeof(usb_status_t));
1143 usbd_setup_default_xfer(xfer, dev, 0, USBD_DEFAULT_TIMEOUT,
1144 &treq, &status,sizeof(usb_status_t),
1145 0, 0);
1146 nerr = usbd_sync_transfer(xfer);
1147 if (nerr)
1148 goto bad;
1149 s = UGETW(status.wStatus);
1150 USBHIST_LOG(usbdebug, "status = 0x%04x", s, 0, 0, 0);
1151 if (!(s & UES_HALT))
1152 goto bad;
1153 treq.bmRequestType = UT_WRITE_ENDPOINT;
1154 treq.bRequest = UR_CLEAR_FEATURE;
1155 USETW(treq.wValue, UF_ENDPOINT_HALT);
1156 USETW(treq.wIndex, 0);
1157 USETW(treq.wLength, 0);
1158 usbd_setup_default_xfer(xfer, dev, 0, USBD_DEFAULT_TIMEOUT,
1159 &treq, &status, 0, 0, 0);
1160 nerr = usbd_sync_transfer(xfer);
1161 if (nerr)
1162 goto bad;
1163 }
1164
1165 bad:
1166 if (err) {
1167 USBHIST_LOG(usbdebug, "returning err = %s",
1168 usbd_errstr(err), 0, 0, 0);
1169 }
1170 usbd_free_xfer(xfer);
1171 return err;
1172 }
1173
1174 const struct usbd_quirks *
1175 usbd_get_quirks(usbd_device_handle dev)
1176 {
1177 #ifdef DIAGNOSTIC
1178 if (dev == NULL) {
1179 printf("usbd_get_quirks: dev == NULL\n");
1180 return 0;
1181 }
1182 #endif
1183 return dev->ud_quirks;
1184 }
1185
1186 /* XXX do periodic free() of free list */
1187
1188 /*
1189 * Called from keyboard driver when in polling mode.
1190 */
1191 void
1192 usbd_dopoll(usbd_interface_handle iface)
1193 {
1194 iface->ui_dev->ud_bus->ub_methods->ubm_dopoll(iface->ui_dev->ud_bus);
1195 }
1196
1197 /*
1198 * XXX use this more??? ub_usepolling it touched manually all over
1199 */
1200 void
1201 usbd_set_polling(usbd_device_handle dev, int on)
1202 {
1203 if (on)
1204 dev->ud_bus->ub_usepolling++;
1205 else
1206 dev->ud_bus->ub_usepolling--;
1207
1208 /* Kick the host controller when switching modes */
1209 mutex_enter(dev->ud_bus->ub_lock);
1210 dev->ud_bus->ub_methods->ubm_softint(dev->ud_bus);
1211 mutex_exit(dev->ud_bus->ub_lock);
1212 }
1213
1214
1215 usb_endpoint_descriptor_t *
1216 usbd_get_endpoint_descriptor(usbd_interface_handle iface, uint8_t address)
1217 {
1218 struct usbd_endpoint *ep;
1219 int i;
1220
1221 for (i = 0; i < iface->ui_idesc->bNumEndpoints; i++) {
1222 ep = &iface->ui_endpoints[i];
1223 if (ep->ue_edesc->bEndpointAddress == address)
1224 return iface->ui_endpoints[i].ue_edesc;
1225 }
1226 return NULL;
1227 }
1228
1229 /*
1230 * usbd_ratecheck() can limit the number of error messages that occurs.
1231 * When a device is unplugged it may take up to 0.25s for the hub driver
1232 * to notice it. If the driver continuosly tries to do I/O operations
1233 * this can generate a large number of messages.
1234 */
1235 int
1236 usbd_ratecheck(struct timeval *last)
1237 {
1238 static struct timeval errinterval = { 0, 250000 }; /* 0.25 s*/
1239
1240 return ratecheck(last, &errinterval);
1241 }
1242
1243 /*
1244 * Search for a vendor/product pair in an array. The item size is
1245 * given as an argument.
1246 */
1247 const struct usb_devno *
1248 usb_match_device(const struct usb_devno *tbl, u_int nentries, u_int sz,
1249 uint16_t vendor, uint16_t product)
1250 {
1251 while (nentries-- > 0) {
1252 uint16_t tproduct = tbl->ud_product;
1253 if (tbl->ud_vendor == vendor &&
1254 (tproduct == product || tproduct == USB_PRODUCT_ANY))
1255 return tbl;
1256 tbl = (const struct usb_devno *)((const char *)tbl + sz);
1257 }
1258 return NULL;
1259 }
1260
1261
1262 void
1263 usb_desc_iter_init(usbd_device_handle dev, usbd_desc_iter_t *iter)
1264 {
1265 const usb_config_descriptor_t *cd = usbd_get_config_descriptor(dev);
1266
1267 iter->cur = (const uByte *)cd;
1268 iter->end = (const uByte *)cd + UGETW(cd->wTotalLength);
1269 }
1270
1271 const usb_descriptor_t *
1272 usb_desc_iter_next(usbd_desc_iter_t *iter)
1273 {
1274 const usb_descriptor_t *desc;
1275
1276 if (iter->cur + sizeof(usb_descriptor_t) >= iter->end) {
1277 if (iter->cur != iter->end)
1278 printf("usb_desc_iter_next: bad descriptor\n");
1279 return NULL;
1280 }
1281 desc = (const usb_descriptor_t *)iter->cur;
1282 if (desc->bLength == 0) {
1283 printf("usb_desc_iter_next: descriptor length = 0\n");
1284 return NULL;
1285 }
1286 iter->cur += desc->bLength;
1287 if (iter->cur > iter->end) {
1288 printf("usb_desc_iter_next: descriptor length too large\n");
1289 return NULL;
1290 }
1291 return desc;
1292 }
1293
1294 usbd_status
1295 usbd_get_string(usbd_device_handle dev, int si, char *buf)
1296 {
1297 return usbd_get_string0(dev, si, buf, 1);
1298 }
1299
1300 usbd_status
1301 usbd_get_string0(usbd_device_handle dev, int si, char *buf, int unicode)
1302 {
1303 int swap = dev->ud_quirks->uq_flags & UQ_SWAP_UNICODE;
1304 usb_string_descriptor_t us;
1305 char *s;
1306 int i, n;
1307 uint16_t c;
1308 usbd_status err;
1309 int size;
1310
1311 USBHIST_FUNC(); USBHIST_CALLED(usbdebug);
1312
1313 buf[0] = '\0';
1314 if (si == 0)
1315 return USBD_INVAL;
1316 if (dev->ud_quirks->uq_flags & UQ_NO_STRINGS)
1317 return USBD_STALLED;
1318 if (dev->ud_langid == USBD_NOLANG) {
1319 /* Set up default language */
1320 err = usbd_get_string_desc(dev, USB_LANGUAGE_TABLE, 0, &us,
1321 &size);
1322 if (err || size < 4) {
1323 USBHIST_LOG(usbdebug, "getting lang failed, using 0",
1324 0, 0, 0, 0);
1325 dev->ud_langid = 0; /* Well, just pick something then */
1326 } else {
1327 /* Pick the first language as the default. */
1328 dev->ud_langid = UGETW(us.bString[0]);
1329 }
1330 }
1331 err = usbd_get_string_desc(dev, si, dev->ud_langid, &us, &size);
1332 if (err)
1333 return err;
1334 s = buf;
1335 n = size / 2 - 1;
1336 if (unicode) {
1337 for (i = 0; i < n; i++) {
1338 c = UGETW(us.bString[i]);
1339 if (swap)
1340 c = (c >> 8) | (c << 8);
1341 s += wput_utf8(s, 3, c);
1342 }
1343 *s++ = 0;
1344 }
1345 #ifdef COMPAT_30
1346 else {
1347 for (i = 0; i < n; i++) {
1348 c = UGETW(us.bString[i]);
1349 if (swap)
1350 c = (c >> 8) | (c << 8);
1351 *s++ = (c < 0x80) ? c : '?';
1352 }
1353 *s++ = 0;
1354 }
1355 #endif
1356 return USBD_NORMAL_COMPLETION;
1357 }
1358