usbdivar.h revision 1.139
1 /* $NetBSD: usbdivar.h,v 1.139 2025/03/31 14:45:14 riastradh Exp $ */ 2 3 /* 4 * Copyright (c) 1998, 2012 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Lennart Augustsson (lennart (at) augustsson.net) at 9 * Carlstedt Research & Technology and Matthew R. Green (mrg (at) eterna23.net). 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 * POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 #ifndef _DEV_USB_USBDIVAR_H_ 34 #define _DEV_USB_USBDIVAR_H_ 35 36 /* 37 * Discussion about locking in the USB code: 38 * 39 * The host controller presents one lock at IPL_SOFTUSB (aka IPL_SOFTNET). 40 * 41 * List of hardware interface methods, and whether the lock is held 42 * when each is called by this module: 43 * 44 * BUS METHOD LOCK NOTES 45 * ----------------------- ------- ------------------------- 46 * ubm_open - might want to take lock? 47 * ubm_softint x may release/reacquire lock 48 * ubm_dopoll - might want to take lock? 49 * ubm_allocx - 50 * ubm_freex - 51 * ubm_abortx x must not release/reacquire lock 52 * ubm_getlock - Called at attach time 53 * ubm_newdev - Will take lock 54 * ubm_rhctrl - 55 * 56 * PIPE METHOD LOCK NOTES 57 * ----------------------- ------- ------------------------- 58 * upm_init - 59 * upm_fini - 60 * upm_transfer x 61 * upm_start x 62 * upm_abort x 63 * upm_close x 64 * upm_cleartoggle - 65 * upm_done x 66 * 67 * The above semantics are likely to change. Little performance 68 * evaluation has been done on this code and the locking strategy. 69 * 70 * USB functions known to expect the lock taken include (this list is 71 * probably not exhaustive): 72 * usb_transfer_complete() 73 * usb_start_next() 74 * 75 */ 76 77 #include <sys/bus.h> 78 #include <sys/callout.h> 79 #include <sys/mutex.h> 80 81 #include <dev/usb/usbdi.h> 82 83 /* From usb_mem.h */ 84 struct usb_dma_block; 85 typedef struct { 86 struct usb_dma_block *udma_block; 87 u_int udma_offs; 88 } usb_dma_t; 89 90 struct usbd_xfer; 91 struct usbd_pipe; 92 struct usbd_port; 93 94 struct usbd_endpoint { 95 usb_endpoint_descriptor_t *ue_edesc; 96 int ue_refcnt; 97 int ue_toggle; 98 }; 99 100 struct usbd_bus_methods { 101 usbd_status (*ubm_open)(struct usbd_pipe *); 102 void (*ubm_softint)(void *); 103 void (*ubm_dopoll)(struct usbd_bus *); 104 struct usbd_xfer *(*ubm_allocx)(struct usbd_bus *, unsigned int); 105 void (*ubm_freex)(struct usbd_bus *, struct usbd_xfer *); 106 void (*ubm_abortx)(struct usbd_xfer *); 107 bool (*ubm_dying)(struct usbd_bus *); 108 void (*ubm_getlock)(struct usbd_bus *, kmutex_t **); 109 usbd_status (*ubm_newdev)(device_t, struct usbd_bus *, int, 110 int, int, struct usbd_port *); 111 112 int (*ubm_rhctrl)(struct usbd_bus *, 113 usb_device_request_t *, void *, int); 114 }; 115 116 struct usbd_pipe_methods { 117 int (*upm_init)(struct usbd_xfer *); 118 void (*upm_fini)(struct usbd_xfer *); 119 usbd_status (*upm_transfer)(struct usbd_xfer *); 120 usbd_status (*upm_start)(struct usbd_xfer *); 121 void (*upm_abort)(struct usbd_xfer *); 122 void (*upm_close)(struct usbd_pipe *); 123 void (*upm_cleartoggle)(struct usbd_pipe *); 124 void (*upm_done)(struct usbd_xfer *); 125 }; 126 127 struct usbd_tt { 128 struct usbd_hub *utt_hub; 129 }; 130 131 struct usbd_port { 132 usb_port_status_t up_status; 133 uint16_t up_power; /* mA of current on port */ 134 uint8_t up_portno; 135 uint8_t up_restartcnt; 136 #define USBD_RESTART_MAX 5 137 uint8_t up_reattach; 138 struct usbd_device *up_dev; /* Connected device */ 139 struct usbd_device *up_parent; /* The ports hub */ 140 struct usbd_tt *up_tt; /* Transaction translator (if any) */ 141 }; 142 143 struct usbd_hub { 144 usbd_status (*uh_explore)(struct usbd_device *hub); 145 void *uh_hubsoftc; 146 usb_hub_descriptor_t uh_hubdesc; 147 struct usbd_port uh_ports[1]; 148 }; 149 150 /*****/ 151 /* 0, root, and 1->127 */ 152 #define USB_ROOTHUB_INDEX 1 153 #define USB_TOTAL_DEVICES (USB_MAX_DEVICES + 1) 154 155 struct usbd_bus { 156 /* Filled by HC driver */ 157 void *ub_hcpriv; 158 int ub_revision; /* USB revision */ 159 #define USBREV_UNKNOWN 0 160 #define USBREV_PRE_1_0 1 161 #define USBREV_1_0 2 162 #define USBREV_1_1 3 163 #define USBREV_2_0 4 164 #define USBREV_3_0 5 165 #define USBREV_3_1 6 166 #define USBREV_STR { "unknown", "pre 1.0", "1.0", "1.1", "2.0", "3.0", "3.1" } 167 int ub_hctype; 168 #define USBHCTYPE_UNKNOWN 0 169 #define USBHCTYPE_MOTG 1 170 #define USBHCTYPE_OHCI 2 171 #define USBHCTYPE_UHCI 3 172 #define USBHCTYPE_EHCI 4 173 #define USBHCTYPE_XHCI 5 174 #define USBHCTYPE_VHCI 6 175 int ub_busnum; 176 const struct usbd_bus_methods 177 *ub_methods; 178 uint32_t ub_pipesize; /* size of a pipe struct */ 179 bool ub_usedma; /* Does this HC support DMA */ 180 int ub_dmaflags; 181 bus_dma_tag_t ub_dmatag; /* DMA tag */ 182 183 /* Filled by usb driver */ 184 kmutex_t *ub_lock; 185 struct usbd_device *ub_roothub; 186 struct usbd_xfer *ub_rhxfer; /* roothub xfer in progress */ 187 kcondvar_t ub_rhxfercv; 188 uint8_t ub_rhaddr; /* roothub address */ 189 uint8_t ub_rhconf; /* roothub configuration */ 190 struct usbd_device *ub_devices[USB_TOTAL_DEVICES]; 191 kcondvar_t ub_needsexplore_cv; 192 char ub_needsexplore;/* a hub a signalled a change */ 193 char ub_usepolling; 194 device_t ub_usbctl; 195 struct usb_device_stats ub_stats; 196 197 void *ub_soft; /* soft interrupt cookie */ 198 }; 199 200 struct usbd_device { 201 struct usbd_bus *ud_bus; /* our controller */ 202 struct usbd_pipe *ud_pipe0; /* pipe 0 */ 203 uint8_t ud_addr; /* device address */ 204 uint8_t ud_config; /* current configuration # */ 205 uint8_t ud_depth; /* distance from root hub */ 206 uint8_t ud_speed; /* low/full/high speed */ 207 uint8_t ud_selfpowered; /* flag for self powered */ 208 uint16_t ud_power; /* mA the device uses */ 209 int16_t ud_langid; /* language for strings */ 210 #define USBD_NOLANG (-1) 211 usb_event_cookie_t ud_cookie; /* unique connection id */ 212 struct usbd_port *ud_powersrc; /* upstream hub port, or 0 */ 213 struct usbd_device *ud_myhub; /* upstream hub */ 214 struct usbd_port *ud_myhsport; /* closest high speed port */ 215 struct usbd_endpoint ud_ep0; /* for pipe 0 */ 216 usb_endpoint_descriptor_t 217 ud_ep0desc; /* for pipe 0 */ 218 struct usbd_interface *ud_ifaces; /* array of all interfaces */ 219 usb_device_descriptor_t ud_ddesc; /* device descriptor */ 220 usb_config_descriptor_t *ud_cdesc; /* full config descr */ 221 usb_bos_descriptor_t *ud_bdesc; /* full BOS descr */ 222 const struct usbd_quirks 223 *ud_quirks; /* device quirks, always set */ 224 struct usbd_hub *ud_hub; /* only if this is a hub */ 225 u_int ud_subdevlen; /* array length of following */ 226 device_t *ud_subdevs; /* sub-devices */ 227 int ud_nifaces_claimed; /* number of ifaces in use */ 228 void *ud_hcpriv; 229 230 char *ud_serial; /* serial number, can be NULL */ 231 char *ud_vendor; /* vendor string, can be NULL */ 232 char *ud_product; /* product string can be NULL */ 233 }; 234 235 struct usbd_interface { 236 struct usbd_device *ui_dev; 237 usb_interface_descriptor_t 238 *ui_idesc; 239 int ui_index; 240 int ui_altindex; 241 struct usbd_endpoint *ui_endpoints; 242 int64_t ui_busy; /* #pipes, or -1 if setting */ 243 }; 244 245 struct usbd_pipe { 246 struct usbd_interface *up_iface; 247 struct usbd_device *up_dev; 248 struct usbd_endpoint *up_endpoint; 249 char up_running; 250 char up_aborting; 251 bool up_serialise; 252 SIMPLEQ_HEAD(, usbd_xfer) 253 up_queue; 254 struct usb_task up_async_task; 255 256 struct usbd_xfer *up_intrxfer; /* used for repeating requests */ 257 char up_repeat; 258 int up_interval; 259 uint8_t up_flags; 260 261 struct usbd_xfer *up_callingxfer; /* currently in callback */ 262 kcondvar_t up_callingcv; 263 264 struct lwp *up_abortlwp; /* lwp currently aborting */ 265 266 /* Filled by HC driver. */ 267 const struct usbd_pipe_methods 268 *up_methods; 269 }; 270 271 struct usbd_xfer { 272 struct usbd_pipe *ux_pipe; 273 void *ux_priv; 274 void *ux_buffer; 275 kcondvar_t ux_cv; 276 uint32_t ux_length; 277 uint32_t ux_actlen; 278 uint16_t ux_flags; 279 uint32_t ux_timeout; 280 usbd_status ux_status; 281 usbd_callback ux_callback; 282 volatile uint8_t ux_done; 283 uint8_t ux_state; /* used for DIAGNOSTIC */ 284 #define XFER_FREE 0x46 285 #define XFER_BUSY 0x55 286 #define XFER_ONQU 0x9e 287 288 /* For control pipe */ 289 usb_device_request_t ux_request; 290 291 /* For isoc */ 292 uint16_t *ux_frlengths; 293 int ux_nframes; 294 295 const struct usbd_pipe_methods *ux_methods; 296 297 /* For memory allocation and softc */ 298 struct usbd_bus *ux_bus; 299 usb_dma_t ux_dmabuf; 300 void *ux_buf; 301 uint32_t ux_bufsize; 302 303 uint8_t ux_rqflags; 304 #define URQ_REQUEST 0x01 305 306 SIMPLEQ_ENTRY(usbd_xfer) 307 ux_next; 308 309 void *ux_hcpriv; /* private use by the HC driver */ 310 311 struct usb_task ux_aborttask; 312 struct callout ux_callout; 313 314 /* 315 * Protected by bus lock. 316 * 317 * - ux_timeout_set: The timeout is scheduled as a callout or 318 * usb task, and has not yet acquired the bus lock. 319 * 320 * - ux_timeout_reset: The xfer completed, and was resubmitted 321 * before the callout or task was able to acquire the bus 322 * lock, so one or the other needs to schedule a new callout. 323 */ 324 bool ux_timeout_set; 325 bool ux_timeout_reset; 326 }; 327 328 void usbd_init(void); 329 void usbd_finish(void); 330 331 #if defined(USB_DEBUG) 332 void usbd_dump_iface(struct usbd_interface *); 333 void usbd_dump_device(struct usbd_device *); 334 void usbd_dump_endpoint(struct usbd_endpoint *); 335 void usbd_dump_queue(struct usbd_pipe *); 336 void usbd_dump_pipe(struct usbd_pipe *); 337 #endif 338 339 /* Routines from usb_subr.c */ 340 int usbctlprint(void *, const char *); 341 void usbd_get_device_strings(struct usbd_device *); 342 void usb_delay_ms_locked(struct usbd_bus *, u_int, kmutex_t *); 343 void usb_delay_ms(struct usbd_bus *, u_int); 344 void usbd_delay_ms_locked(struct usbd_device *, u_int, kmutex_t *); 345 void usbd_delay_ms(struct usbd_device *, u_int); 346 usbd_status usbd_reset_port(struct usbd_device *, int, usb_port_status_t *); 347 usbd_status usbd_setup_pipe(struct usbd_device *, 348 struct usbd_interface *, 349 struct usbd_endpoint *, int, 350 struct usbd_pipe **); 351 usbd_status usbd_setup_pipe_flags(struct usbd_device *, 352 struct usbd_interface *, 353 struct usbd_endpoint *, int, 354 struct usbd_pipe **, 355 uint8_t); 356 usbd_status usbd_new_device(device_t, struct usbd_bus *, int, int, int, 357 struct usbd_port *); 358 usbd_status usbd_reattach_device(device_t, struct usbd_device *, 359 int, const int *); 360 361 void usbd_remove_device(struct usbd_device *, struct usbd_port *); 362 bool usbd_iface_locked(struct usbd_interface *); 363 usbd_status usbd_iface_lock(struct usbd_interface *); 364 void usbd_iface_unlock(struct usbd_interface *); 365 usbd_status usbd_iface_piperef(struct usbd_interface *); 366 void usbd_iface_pipeunref(struct usbd_interface *); 367 usbd_status usbd_fill_iface_data(struct usbd_device *, int, int); 368 void usb_free_device(struct usbd_device *); 369 370 void usb_transfer_complete(struct usbd_xfer *); 371 int usb_disconnect_port(struct usbd_port *, device_t, int); 372 373 usbd_status usbd_endpoint_acquire(struct usbd_device *, 374 struct usbd_endpoint *, int); 375 void usbd_endpoint_release(struct usbd_device *, 376 struct usbd_endpoint *); 377 378 void usbd_kill_pipe(struct usbd_pipe *); 379 usbd_status usbd_attach_roothub(device_t, struct usbd_device *); 380 usbd_status usbd_probe_and_attach(device_t, struct usbd_device *, int, int); 381 382 /* Routines from usb.c */ 383 void usb_needs_explore(struct usbd_device *); 384 void usb_needs_reattach(struct usbd_device *); 385 void usb_schedsoftintr(struct usbd_bus *); 386 387 static __inline int 388 usbd_xfer_isread(struct usbd_xfer *xfer) 389 { 390 if (xfer->ux_rqflags & URQ_REQUEST) 391 return xfer->ux_request.bmRequestType & UT_READ; 392 393 return xfer->ux_pipe->up_endpoint->ue_edesc->bEndpointAddress & 394 UE_DIR_IN; 395 } 396 397 static __inline size_t 398 usb_addr2dindex(int addr) 399 { 400 401 return USB_ROOTHUB_INDEX + addr; 402 } 403 404 /* 405 * These macros reflect the current locking scheme. They might change. 406 */ 407 408 #define usbd_lock_pipe(p) mutex_enter((p)->up_dev->ud_bus->ub_lock) 409 #define usbd_unlock_pipe(p) mutex_exit((p)->up_dev->ud_bus->ub_lock) 410 411 #endif /* _DEV_USB_USBDIVAR_H_ */ 412
Indexes created Thu Sep 25 06:09:39 GMT 2025