Home | History | Annotate | Line # | Download | only in usb
uvisor.c revision 1.11
      1 /*	$NetBSD: uvisor.c,v 1.11 2001/01/23 21:56:17 augustss Exp $	*/
      2 
      3 /*
      4  * Copyright (c) 2000 The NetBSD Foundation, Inc.
      5  * All rights reserved.
      6  *
      7  * This code is derived from software contributed to The NetBSD Foundation
      8  * by Lennart Augustsson (lennart (at) augustsson.net) at
      9  * Carlstedt Research & Technology.
     10  *
     11  * Redistribution and use in source and binary forms, with or without
     12  * modification, are permitted provided that the following conditions
     13  * are met:
     14  * 1. Redistributions of source code must retain the above copyright
     15  *    notice, this list of conditions and the following disclaimer.
     16  * 2. Redistributions in binary form must reproduce the above copyright
     17  *    notice, this list of conditions and the following disclaimer in the
     18  *    documentation and/or other materials provided with the distribution.
     19  * 3. All advertising materials mentioning features or use of this software
     20  *    must display the following acknowledgement:
     21  *        This product includes software developed by the NetBSD
     22  *        Foundation, Inc. and its contributors.
     23  * 4. Neither the name of The NetBSD Foundation nor the names of its
     24  *    contributors may be used to endorse or promote products derived
     25  *    from this software without specific prior written permission.
     26  *
     27  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     28  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     29  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     30  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     31  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     32  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     33  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     34  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     35  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     36  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     37  * POSSIBILITY OF SUCH DAMAGE.
     38  */
     39 
     40 /*
     41  * Handspring Visor (Palmpilot compatible PDA) driver
     42  */
     43 
     44 #include <sys/param.h>
     45 #include <sys/systm.h>
     46 #include <sys/kernel.h>
     47 #include <sys/device.h>
     48 #include <sys/conf.h>
     49 #include <sys/tty.h>
     50 
     51 #include <dev/usb/usb.h>
     52 #include <dev/usb/usbhid.h>
     53 
     54 #include <dev/usb/usbdi.h>
     55 #include <dev/usb/usbdi_util.h>
     56 #include <dev/usb/usbdevs.h>
     57 
     58 #include <dev/usb/ucomvar.h>
     59 
     60 #ifdef UVISOR_DEBUG
     61 #define DPRINTF(x)	if (uvisordebug) printf x
     62 #define DPRINTFN(n,x)	if (uvisordebug>(n)) printf x
     63 int uvisordebug = 0;
     64 #else
     65 #define DPRINTF(x)
     66 #define DPRINTFN(n,x)
     67 #endif
     68 
     69 #define UVISOR_CONFIG_INDEX	0
     70 #define UVISOR_IFACE_INDEX	0
     71 
     72 /* From the Linux driver */
     73 /*
     74  * UVISOR_REQUEST_BYTES_AVAILABLE asks the visor for the number of bytes that
     75  * are available to be transfered to the host for the specified endpoint.
     76  * Currently this is not used, and always returns 0x0001
     77  */
     78 #define UVISOR_REQUEST_BYTES_AVAILABLE		0x01
     79 
     80 /*
     81  * UVISOR_CLOSE_NOTIFICATION is set to the device to notify it that the host
     82  * is now closing the pipe. An empty packet is sent in response.
     83  */
     84 #define UVISOR_CLOSE_NOTIFICATION		0x02
     85 
     86 /*
     87  * UVISOR_GET_CONNECTION_INFORMATION is sent by the host during enumeration to
     88  * get the endpoints used by the connection.
     89  */
     90 #define UVISOR_GET_CONNECTION_INFORMATION	0x03
     91 
     92 
     93 /*
     94  * UVISOR_GET_CONNECTION_INFORMATION returns data in the following format
     95  */
     96 #define UVISOR_MAX_CONN 8
     97 struct uvisor_connection_info {
     98 	uWord	num_ports;
     99 	struct {
    100 		uByte	port_function_id;
    101 		uByte	port;
    102 	} connections[UVISOR_MAX_CONN];
    103 };
    104 #define UVISOR_CONNECTION_INFO_SIZE 18
    105 
    106 
    107 /* struct uvisor_connection_info.connection[x].port_function_id defines: */
    108 #define UVISOR_FUNCTION_GENERIC		0x00
    109 #define UVISOR_FUNCTION_DEBUGGER	0x01
    110 #define UVISOR_FUNCTION_HOTSYNC		0x02
    111 #define UVISOR_FUNCTION_CONSOLE		0x03
    112 #define UVISOR_FUNCTION_REMOTE_FILE_SYS	0x04
    113 
    114 
    115 #define UVISORIBUFSIZE 1024
    116 #define UVISOROBUFSIZE 1024
    117 
    118 struct uvisor_softc {
    119 	USBBASEDEVICE		sc_dev;		/* base device */
    120 	usbd_device_handle	sc_udev;	/* device */
    121 	usbd_interface_handle	sc_iface;	/* interface */
    122 
    123 	device_ptr_t		sc_subdevs[UVISOR_MAX_CONN];
    124 	int			sc_numcon;
    125 
    126 	u_char			sc_dying;
    127 };
    128 
    129 Static usbd_status uvisor_init(struct uvisor_softc *,
    130 			       struct uvisor_connection_info *);
    131 
    132 Static void uvisor_close(void *, int);
    133 
    134 
    135 struct ucom_methods uvisor_methods = {
    136 	NULL,
    137 	NULL,
    138 	NULL,
    139 	NULL,
    140 	NULL,
    141 	uvisor_close,
    142 	NULL,
    143 	NULL,
    144 };
    145 
    146 USB_DECLARE_DRIVER(uvisor);
    147 
    148 USB_MATCH(uvisor)
    149 {
    150 	USB_MATCH_START(uvisor, uaa);
    151 
    152 	if (uaa->iface != NULL)
    153 		return (UMATCH_NONE);
    154 
    155 	DPRINTFN(20,("uvisor: vendor=0x%x, product=0x%x\n",
    156 		     uaa->vendor, uaa->product));
    157 
    158 	if (uaa->vendor == USB_VENDOR_HANDSPRING &&
    159 	    uaa->product == USB_PRODUCT_HANDSPRING_VISOR)
    160 		return (UMATCH_VENDOR_PRODUCT);
    161 
    162 	return (UMATCH_NONE);
    163 }
    164 
    165 USB_ATTACH(uvisor)
    166 {
    167 	USB_ATTACH_START(uvisor, sc, uaa);
    168 	usbd_device_handle dev = uaa->device;
    169 	usbd_interface_handle iface;
    170 	usb_interface_descriptor_t *id;
    171 	struct uvisor_connection_info coninfo;
    172 	usb_endpoint_descriptor_t *ed;
    173 	char devinfo[1024];
    174 	char *devname = USBDEVNAME(sc->sc_dev);
    175 	int i, j, hasin, hasout, port;
    176 	usbd_status err;
    177 	struct ucom_attach_args uca;
    178 
    179 	DPRINTFN(10,("\nuvisor_attach: sc=%p\n", sc));
    180 
    181 	/* Move the device into the configured state. */
    182 	err = usbd_set_config_index(dev, UVISOR_CONFIG_INDEX, 1);
    183 	if (err) {
    184 		printf("\n%s: failed to set configuration, err=%s\n",
    185 		       devname, usbd_errstr(err));
    186 		goto bad;
    187 	}
    188 
    189 	err = usbd_device2interface_handle(dev, UVISOR_IFACE_INDEX, &iface);
    190 	if (err) {
    191 		printf("\n%s: failed to get interface, err=%s\n",
    192 		       devname, usbd_errstr(err));
    193 		goto bad;
    194 	}
    195 
    196 	usbd_devinfo(dev, 0, devinfo);
    197 	USB_ATTACH_SETUP;
    198 	printf("%s: %s\n", devname, devinfo);
    199 
    200 	id = usbd_get_interface_descriptor(iface);
    201 
    202 	sc->sc_udev = dev;
    203 	sc->sc_iface = iface;
    204 
    205 	uca.ibufsize = UVISORIBUFSIZE;
    206 	uca.obufsize = UVISOROBUFSIZE;
    207 	uca.ibufsizepad = UVISORIBUFSIZE;
    208 	uca.opkthdrlen = 0;
    209 	uca.device = dev;
    210 	uca.iface = iface;
    211 	uca.methods = &uvisor_methods;
    212 	uca.arg = sc;
    213 
    214 	err = uvisor_init(sc, &coninfo);
    215 	if (err) {
    216 		printf("%s: init failed, %s\n", USBDEVNAME(sc->sc_dev),
    217 		       usbd_errstr(err));
    218 		goto bad;
    219 	}
    220 
    221 	usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev,
    222 			   USBDEV(sc->sc_dev));
    223 
    224 	sc->sc_numcon = UGETW(coninfo.num_ports);
    225 	if (sc->sc_numcon > UVISOR_MAX_CONN)
    226 		sc->sc_numcon = UVISOR_MAX_CONN;
    227 
    228 	/* Attach a ucom for each connection. */
    229 	for (i = 0; i < sc->sc_numcon; ++i) {
    230 		switch (coninfo.connections[i].port_function_id) {
    231 		case UVISOR_FUNCTION_GENERIC:
    232 			uca.info = "Generic";
    233 			break;
    234 		case UVISOR_FUNCTION_DEBUGGER:
    235 			uca.info = "Debugger";
    236 			break;
    237 		case UVISOR_FUNCTION_HOTSYNC:
    238 			uca.info = "HotSync";
    239 			break;
    240 		case UVISOR_FUNCTION_REMOTE_FILE_SYS:
    241 			uca.info = "Remote File System";
    242 			break;
    243 		default:
    244 			uca.info = "unknown";
    245 			break;
    246 		}
    247 		port = coninfo.connections[i].port;
    248 		uca.portno = port;
    249 		uca.bulkin = port | UE_DIR_IN;
    250 		uca.bulkout = port | UE_DIR_OUT;
    251 		/* Verify that endpoints exist. */
    252 		for (hasin = hasout = j = 0; j < id->bNumEndpoints; j++) {
    253 			ed = usbd_interface2endpoint_descriptor(iface, j);
    254 			if (ed == NULL)
    255 				break;
    256 			if (UE_GET_ADDR(ed->bEndpointAddress) == port &&
    257 			    (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
    258 				if (UE_GET_DIR(ed->bEndpointAddress)
    259 				    == UE_DIR_IN)
    260 					hasin++;
    261 				else
    262 					hasout++;
    263 			}
    264 		}
    265 		if (hasin == 1 && hasout == 1)
    266 			sc->sc_subdevs[i] = config_found_sm(self, &uca,
    267 			    ucomprint, ucomsubmatch);
    268 		else
    269 			printf("%s: no proper endpoints for port %d (%d,%d)\n",
    270 			    USBDEVNAME(sc->sc_dev), port, hasin, hasout);
    271 	}
    272 
    273 	USB_ATTACH_SUCCESS_RETURN;
    274 
    275 bad:
    276 	DPRINTF(("uvisor_attach: ATTACH ERROR\n"));
    277 	sc->sc_dying = 1;
    278 	USB_ATTACH_ERROR_RETURN;
    279 }
    280 
    281 int
    282 uvisor_activate(device_ptr_t self, enum devact act)
    283 {
    284 	struct uvisor_softc *sc = (struct uvisor_softc *)self;
    285 	int rv = 0;
    286 	int i;
    287 
    288 	switch (act) {
    289 	case DVACT_ACTIVATE:
    290 		return (EOPNOTSUPP);
    291 		break;
    292 
    293 	case DVACT_DEACTIVATE:
    294 		for (i = 0; i < sc->sc_numcon; i++)
    295 			if (sc->sc_subdevs[i] != NULL)
    296 				rv = config_deactivate(sc->sc_subdevs[i]);
    297 		sc->sc_dying = 1;
    298 		break;
    299 	}
    300 	return (rv);
    301 }
    302 
    303 int
    304 uvisor_detach(device_ptr_t self, int flags)
    305 {
    306 	struct uvisor_softc *sc = (struct uvisor_softc *)self;
    307 	int rv = 0;
    308 	int i;
    309 
    310 	DPRINTF(("uvisor_detach: sc=%p flags=%d\n", sc, flags));
    311 	sc->sc_dying = 1;
    312 	for (i = 0; i < sc->sc_numcon; i++) {
    313 		if (sc->sc_subdevs[i] != NULL) {
    314 			rv |= config_detach(sc->sc_subdevs[i], flags);
    315 			sc->sc_subdevs[i] = NULL;
    316 		}
    317 	}
    318 
    319 	usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev,
    320 			   USBDEV(sc->sc_dev));
    321 
    322 
    323 	return (rv);
    324 }
    325 
    326 usbd_status
    327 uvisor_init(struct uvisor_softc *sc, struct uvisor_connection_info *ci)
    328 {
    329 	usbd_status err;
    330 	usb_device_request_t req;
    331 	int actlen;
    332 	uWord avail;
    333 
    334 	DPRINTF(("uvisor_init: getting connection info\n"));
    335 	req.bmRequestType = UT_READ_VENDOR_ENDPOINT;
    336 	req.bRequest = UVISOR_GET_CONNECTION_INFORMATION;
    337 	USETW(req.wValue, 0);
    338 	USETW(req.wIndex, 0);
    339 	USETW(req.wLength, UVISOR_CONNECTION_INFO_SIZE);
    340 	err = usbd_do_request_flags(sc->sc_udev, &req, ci,
    341 				    USBD_SHORT_XFER_OK, &actlen);
    342 	if (err)
    343 		return (err);
    344 
    345 	DPRINTF(("uvisor_init: getting available bytes\n"));
    346 	req.bmRequestType = UT_READ_VENDOR_ENDPOINT;
    347 	req.bRequest = UVISOR_REQUEST_BYTES_AVAILABLE;
    348 	USETW(req.wValue, 0);
    349 	USETW(req.wIndex, 5);
    350 	USETW(req.wLength, sizeof avail);
    351 	err = usbd_do_request(sc->sc_udev, &req, &avail);
    352 	if (err)
    353 		return (err);
    354 	DPRINTF(("uvisor_init: avail=%d\n", UGETW(avail)));
    355 
    356 	DPRINTF(("uvisor_init: done\n"));
    357 	return (err);
    358 }
    359 
    360 void
    361 uvisor_close(void *addr, int portno)
    362 {
    363 	struct uvisor_softc *sc = addr;
    364 	usb_device_request_t req;
    365 	struct uvisor_connection_info coninfo; /* XXX ? */
    366 	int actlen;
    367 
    368 	if (sc->sc_dying)
    369 		return;
    370 
    371 	req.bmRequestType = UT_READ_VENDOR_ENDPOINT; /* XXX read? */
    372 	req.bRequest = UVISOR_CLOSE_NOTIFICATION;
    373 	USETW(req.wValue, 0);
    374 	USETW(req.wIndex, 0);
    375 	USETW(req.wLength, UVISOR_CONNECTION_INFO_SIZE);
    376 	(void)usbd_do_request_flags(sc->sc_udev, &req, &coninfo,
    377 				    USBD_SHORT_XFER_OK, &actlen);
    378 }
    379