Home | History | Annotate | Line # | Download | only in usb
vhci.c revision 1.13
      1  1.13      maxv /*	$NetBSD: vhci.c,v 1.13 2020/03/29 09:46:14 maxv Exp $ */
      2   1.1      maxv 
      3   1.1      maxv /*
      4  1.10      maxv  * Copyright (c) 2019-2020 The NetBSD Foundation, Inc.
      5   1.1      maxv  * All rights reserved.
      6   1.1      maxv  *
      7   1.1      maxv  * This code is derived from software contributed to The NetBSD Foundation
      8   1.1      maxv  * by Maxime Villard.
      9   1.1      maxv  *
     10   1.1      maxv  * Redistribution and use in source and binary forms, with or without
     11   1.1      maxv  * modification, are permitted provided that the following conditions
     12   1.1      maxv  * are met:
     13   1.1      maxv  * 1. Redistributions of source code must retain the above copyright
     14   1.1      maxv  *    notice, this list of conditions and the following disclaimer.
     15   1.1      maxv  * 2. Redistributions in binary form must reproduce the above copyright
     16   1.1      maxv  *    notice, this list of conditions and the following disclaimer in the
     17   1.1      maxv  *    documentation and/or other materials provided with the distribution.
     18   1.1      maxv  *
     19   1.1      maxv  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     20   1.1      maxv  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     21   1.1      maxv  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     22   1.1      maxv  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     23   1.1      maxv  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     24   1.1      maxv  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     25   1.1      maxv  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     26   1.1      maxv  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     27   1.1      maxv  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     28   1.1      maxv  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     29   1.1      maxv  * POSSIBILITY OF SUCH DAMAGE.
     30   1.1      maxv  */
     31   1.1      maxv 
     32   1.1      maxv #include <sys/cdefs.h>
     33  1.13      maxv __KERNEL_RCSID(0, "$NetBSD: vhci.c,v 1.13 2020/03/29 09:46:14 maxv Exp $");
     34   1.1      maxv 
     35   1.1      maxv #ifdef _KERNEL_OPT
     36   1.1      maxv #include "opt_usb.h"
     37   1.1      maxv #endif
     38   1.1      maxv 
     39   1.1      maxv #include <sys/param.h>
     40   1.1      maxv 
     41   1.1      maxv #include <sys/bus.h>
     42   1.1      maxv #include <sys/cpu.h>
     43   1.1      maxv #include <sys/conf.h>
     44   1.1      maxv #include <sys/device.h>
     45   1.1      maxv #include <sys/kernel.h>
     46   1.1      maxv #include <sys/kmem.h>
     47   1.1      maxv #include <sys/mutex.h>
     48   1.1      maxv #include <sys/proc.h>
     49   1.1      maxv #include <sys/queue.h>
     50   1.1      maxv #include <sys/systm.h>
     51   1.1      maxv #include <sys/mman.h>
     52   1.1      maxv #include <sys/file.h>
     53   1.1      maxv #include <sys/filedesc.h>
     54   1.1      maxv 
     55   1.1      maxv #include <machine/endian.h>
     56   1.1      maxv 
     57   1.1      maxv #include "ioconf.h"
     58   1.1      maxv 
     59   1.1      maxv #include <dev/usb/usb.h>
     60   1.1      maxv #include <dev/usb/usbdi.h>
     61   1.1      maxv #include <dev/usb/usbdivar.h>
     62   1.1      maxv 
     63   1.1      maxv #include <dev/usb/usbroothub.h>
     64   1.1      maxv 
     65   1.1      maxv #ifdef VHCI_DEBUG
     66   1.1      maxv #define DPRINTF(fmt, ...)	printf(fmt, __VA_ARGS__)
     67   1.1      maxv #else
     68   1.1      maxv #define DPRINTF(fmt, ...)	__nothing
     69   1.1      maxv #endif
     70   1.1      maxv 
     71   1.1      maxv static usbd_status vhci_open(struct usbd_pipe *);
     72   1.1      maxv static void vhci_softintr(void *);
     73   1.1      maxv 
     74   1.1      maxv static struct usbd_xfer *vhci_allocx(struct usbd_bus *, unsigned int);
     75   1.1      maxv static void vhci_freex(struct usbd_bus *, struct usbd_xfer *);
     76   1.1      maxv static void vhci_get_lock(struct usbd_bus *, kmutex_t **);
     77   1.1      maxv static int vhci_roothub_ctrl(struct usbd_bus *, usb_device_request_t *,
     78   1.1      maxv     void *, int);
     79   1.1      maxv 
     80   1.1      maxv static const struct usbd_bus_methods vhci_bus_methods = {
     81   1.1      maxv 	.ubm_open =	vhci_open,
     82   1.1      maxv 	.ubm_softint =	vhci_softintr,
     83   1.1      maxv 	.ubm_dopoll =	NULL,
     84   1.1      maxv 	.ubm_allocx =	vhci_allocx,
     85   1.1      maxv 	.ubm_freex =	vhci_freex,
     86   1.1      maxv 	.ubm_getlock =	vhci_get_lock,
     87   1.1      maxv 	.ubm_rhctrl =	vhci_roothub_ctrl,
     88   1.1      maxv };
     89   1.1      maxv 
     90   1.1      maxv static usbd_status vhci_device_ctrl_transfer(struct usbd_xfer *);
     91   1.1      maxv static usbd_status vhci_device_ctrl_start(struct usbd_xfer *);
     92   1.1      maxv static void vhci_device_ctrl_abort(struct usbd_xfer *);
     93   1.1      maxv static void vhci_device_ctrl_close(struct usbd_pipe *);
     94   1.1      maxv static void vhci_device_ctrl_cleartoggle(struct usbd_pipe *);
     95   1.1      maxv static void vhci_device_ctrl_done(struct usbd_xfer *);
     96   1.1      maxv 
     97   1.1      maxv static const struct usbd_pipe_methods vhci_device_ctrl_methods = {
     98   1.1      maxv 	.upm_init =		NULL,
     99   1.1      maxv 	.upm_fini =		NULL,
    100   1.1      maxv 	.upm_transfer =		vhci_device_ctrl_transfer,
    101   1.1      maxv 	.upm_start =		vhci_device_ctrl_start,
    102   1.1      maxv 	.upm_abort =		vhci_device_ctrl_abort,
    103   1.1      maxv 	.upm_close =		vhci_device_ctrl_close,
    104   1.1      maxv 	.upm_cleartoggle =	vhci_device_ctrl_cleartoggle,
    105   1.1      maxv 	.upm_done =		vhci_device_ctrl_done,
    106   1.1      maxv };
    107   1.1      maxv 
    108   1.1      maxv static usbd_status vhci_root_intr_transfer(struct usbd_xfer *);
    109   1.1      maxv static usbd_status vhci_root_intr_start(struct usbd_xfer *);
    110   1.1      maxv static void vhci_root_intr_abort(struct usbd_xfer *);
    111   1.1      maxv static void vhci_root_intr_close(struct usbd_pipe *);
    112   1.1      maxv static void vhci_root_intr_cleartoggle(struct usbd_pipe *);
    113   1.1      maxv static void vhci_root_intr_done(struct usbd_xfer *);
    114   1.1      maxv 
    115   1.1      maxv static const struct usbd_pipe_methods vhci_root_intr_methods = {
    116   1.1      maxv 	.upm_init =		NULL,
    117   1.1      maxv 	.upm_fini =		NULL,
    118   1.1      maxv 	.upm_transfer =		vhci_root_intr_transfer,
    119   1.1      maxv 	.upm_start =		vhci_root_intr_start,
    120   1.1      maxv 	.upm_abort =		vhci_root_intr_abort,
    121   1.1      maxv 	.upm_close =		vhci_root_intr_close,
    122   1.1      maxv 	.upm_cleartoggle =	vhci_root_intr_cleartoggle,
    123   1.1      maxv 	.upm_done =		vhci_root_intr_done,
    124   1.1      maxv };
    125   1.1      maxv 
    126   1.9      maxv /*
    127   1.9      maxv  * There are three structures to understand: vxfers, packets, and ports.
    128   1.9      maxv  *
    129   1.9      maxv  * Each xfer from the point of view of the USB stack is a vxfer from the point
    130   1.9      maxv  * of view of vHCI.
    131   1.9      maxv  *
    132   1.9      maxv  * A vxfer has a linked list containing a maximum of two packets: a request
    133   1.9      maxv  * packet and possibly a data packet. Packets basically contain data exchanged
    134   1.9      maxv  * between the Host and the virtual USB device. A packet is linked to both a
    135   1.9      maxv  * vxfer and a port.
    136   1.9      maxv  *
    137   1.9      maxv  * A port is an abstraction of an actual USB port. Each virtual USB device gets
    138   1.9      maxv  * connected to a port. A port has two lists:
    139   1.9      maxv  *  - The Usb-To-Host list, containing packets to be fetched from the USB
    140   1.9      maxv  *    device and provided to the host.
    141   1.9      maxv  *  - The Host-To-Usb list, containing packets to be sent from the Host to the
    142   1.9      maxv  *    USB device.
    143   1.9      maxv  * Request packets are always in the H->U direction. Data packets however can
    144   1.9      maxv  * be in both the H->U and U->H directions.
    145   1.9      maxv  *
    146   1.9      maxv  * With read() and write() operations on /dev/vhci, userland respectively
    147   1.9      maxv  * "fetches" and "sends" packets from or to the virtual USB device, which
    148   1.9      maxv  * respectively means reading/inserting packets in the H->U and U->H lists on
    149   1.9      maxv  * the port where the virtual USB device is connected.
    150   1.9      maxv  *
    151   1.9      maxv  *             +------------------------------------------------+
    152   1.9      maxv  *             |                 USB Stack                      |
    153   1.9      maxv  *             +---------------------^--------------------------+
    154   1.9      maxv  *                                   |
    155   1.9      maxv  *             +---------------------V--------------------------+
    156   1.9      maxv  *             | +----------------+    +-------------+          |
    157   1.9      maxv  *             | | Request Packet |    | Data Packet |     Xfer |
    158   1.9      maxv  *             | +-------|--------+    +----|---^----+          |
    159   1.9      maxv  *             +---------|------------------|---|---------------+
    160   1.9      maxv  *                       |                  |   |
    161   1.9      maxv  *                       |   +--------------+   |
    162   1.9      maxv  *                       |   |                  |
    163   1.9      maxv  *             +---------|---|------------------|---------------+
    164   1.9      maxv  *             |     +---V---V---+    +---------|-+             |
    165   1.9      maxv  *             |     | H->U List |    | U->H List |   vHCI Port |
    166   1.9      maxv  *             |     +-----|-----+    +-----^-----+             |
    167   1.9      maxv  *             +-----------|----------------|-------------------+
    168   1.9      maxv  *                         |                |
    169   1.9      maxv  *             +-----------|----------------|-------------------+
    170   1.9      maxv  *             |     +-----V-----+    +-----|-----+             |
    171   1.9      maxv  *             |     |   read()  |    |  write()  |     vHCI FD |
    172   1.9      maxv  *             |     +-----------+    +-----------+             |
    173   1.9      maxv  *             +------------------------------------------------+
    174   1.9      maxv  */
    175   1.9      maxv 
    176  1.11      maxv typedef struct {
    177  1.11      maxv 	int type;
    178  1.11      maxv #define VHCI_REQ_CTRL	0
    179  1.11      maxv 
    180  1.11      maxv 	union {
    181  1.11      maxv 		usb_device_request_t ctrl;
    182  1.11      maxv 	} u;
    183  1.11      maxv } vhci_request_t;
    184  1.11      maxv 
    185  1.13      maxv struct vhci_xfer;
    186  1.13      maxv 
    187   1.1      maxv typedef struct vhci_packet {
    188  1.11      maxv 	/* General. */
    189   1.2      maxv 	TAILQ_ENTRY(vhci_packet) portlist;
    190   1.2      maxv 	TAILQ_ENTRY(vhci_packet) xferlist;
    191   1.9      maxv 	struct vhci_xfer *vxfer;
    192   1.2      maxv 	bool utoh;
    193  1.10      maxv 	uint8_t addr;
    194  1.11      maxv 
    195  1.11      maxv 	/* Exposed for FD operations. */
    196   1.1      maxv 	uint8_t *buf;
    197   1.1      maxv 	size_t size;
    198   1.1      maxv 	size_t cursor;
    199   1.1      maxv } vhci_packet_t;
    200   1.1      maxv 
    201   1.2      maxv typedef TAILQ_HEAD(, vhci_packet) vhci_packet_list_t;
    202   1.1      maxv 
    203  1.10      maxv #define VHCI_NADDRS	16	/* maximum supported by USB */
    204  1.10      maxv 
    205   1.1      maxv typedef struct {
    206   1.1      maxv 	kmutex_t lock;
    207   1.1      maxv 	int status;
    208   1.1      maxv 	int change;
    209   1.1      maxv 	struct {
    210   1.1      maxv 		vhci_packet_list_t usb_to_host;
    211   1.1      maxv 		vhci_packet_list_t host_to_usb;
    212  1.10      maxv 	} endpoints[VHCI_NADDRS];
    213   1.1      maxv } vhci_port_t;
    214   1.1      maxv 
    215   1.1      maxv typedef struct {
    216   1.1      maxv 	struct usbd_pipe pipe;
    217   1.1      maxv } vhci_pipe_t;
    218   1.1      maxv 
    219   1.1      maxv typedef struct vhci_xfer {
    220   1.1      maxv 	/* General. */
    221   1.1      maxv 	struct usbd_xfer xfer;
    222   1.1      maxv 
    223   1.9      maxv 	/* Port where the xfer occurs. */
    224   1.1      maxv 	vhci_port_t *port;
    225   1.9      maxv 
    226   1.9      maxv 	/* Packets in the xfer. */
    227   1.9      maxv 	size_t npkts;
    228   1.1      maxv 	vhci_packet_list_t pkts;
    229   1.9      maxv 
    230  1.13      maxv 	/* Header storage. */
    231  1.13      maxv 	vhci_request_t reqbuf;
    232  1.13      maxv 
    233   1.9      maxv 	/* Used for G/C. */
    234   1.2      maxv 	TAILQ_ENTRY(vhci_xfer) freelist;
    235   1.1      maxv } vhci_xfer_t;
    236   1.1      maxv 
    237   1.2      maxv typedef TAILQ_HEAD(, vhci_xfer) vhci_xfer_list_t;
    238   1.1      maxv 
    239   1.1      maxv #define VHCI_INDEX2PORT(idx)	(idx)
    240   1.1      maxv #define VHCI_NPORTS		4
    241   1.1      maxv 
    242   1.1      maxv typedef struct {
    243   1.1      maxv 	device_t sc_dev;
    244   1.1      maxv 
    245   1.1      maxv 	struct usbd_bus sc_bus;
    246   1.1      maxv 	bool sc_dying;
    247   1.1      maxv 	kmutex_t sc_lock;
    248   1.1      maxv 
    249   1.1      maxv 	/*
    250   1.1      maxv 	 * Intr Root. Used to attach the devices.
    251   1.1      maxv 	 */
    252   1.1      maxv 	struct usbd_xfer *sc_intrxfer;
    253   1.1      maxv 
    254   1.1      maxv 	/*
    255   1.1      maxv 	 * The ports. Zero is for the roothub, one and beyond for the USB
    256   1.1      maxv 	 * devices.
    257   1.1      maxv 	 */
    258   1.1      maxv 	size_t sc_nports;
    259   1.1      maxv 	vhci_port_t sc_port[VHCI_NPORTS];
    260   1.1      maxv 
    261   1.1      maxv 	device_t sc_child; /* /dev/usb# device */
    262   1.1      maxv } vhci_softc_t;
    263   1.1      maxv 
    264   1.1      maxv typedef struct {
    265   1.1      maxv 	u_int port;
    266  1.10      maxv 	uint8_t addr;
    267   1.1      maxv 	vhci_softc_t *softc;
    268   1.1      maxv } vhci_fd_t;
    269   1.1      maxv 
    270   1.1      maxv extern struct cfdriver vhci_cd;
    271   1.1      maxv 
    272   1.1      maxv /* -------------------------------------------------------------------------- */
    273   1.1      maxv 
    274   1.1      maxv static void
    275  1.11      maxv vhci_pkt_ctrl_create(vhci_port_t *port, struct usbd_xfer *xfer, bool utoh,
    276  1.10      maxv     uint8_t addr)
    277   1.1      maxv {
    278   1.1      maxv 	vhci_xfer_t *vxfer = (vhci_xfer_t *)xfer;
    279   1.9      maxv 	vhci_packet_list_t *reqlist, *datlist;
    280   1.9      maxv 	vhci_packet_t *req, *dat = NULL;
    281   1.9      maxv 	size_t npkts = 0;
    282   1.1      maxv 
    283   1.9      maxv 	/* Request packet. */
    284  1.10      maxv 	reqlist = &port->endpoints[addr].host_to_usb;
    285   1.1      maxv 	req = kmem_zalloc(sizeof(*req), KM_SLEEP);
    286   1.9      maxv 	req->vxfer = vxfer;
    287   1.2      maxv 	req->utoh = false;
    288  1.10      maxv 	req->addr = addr;
    289  1.13      maxv 	req->buf = (uint8_t *)&vxfer->reqbuf;
    290  1.13      maxv 	req->size = sizeof(vxfer->reqbuf);
    291   1.1      maxv 	req->cursor = 0;
    292   1.9      maxv 	npkts++;
    293   1.1      maxv 
    294  1.11      maxv 	/* Init the request buffer. */
    295  1.13      maxv 	memset(&vxfer->reqbuf, 0, sizeof(vxfer->reqbuf));
    296  1.13      maxv 	vxfer->reqbuf.type = VHCI_REQ_CTRL;
    297  1.13      maxv 	memcpy(&vxfer->reqbuf.u.ctrl, &xfer->ux_request,
    298  1.11      maxv 	    sizeof(xfer->ux_request));
    299  1.11      maxv 
    300   1.1      maxv 	/* Data packet. */
    301   1.2      maxv 	if (xfer->ux_length > 0) {
    302  1.10      maxv 		if (utoh) {
    303  1.10      maxv 			datlist = &port->endpoints[addr].usb_to_host;
    304   1.2      maxv 		} else {
    305  1.10      maxv 			datlist = &port->endpoints[addr].host_to_usb;
    306   1.2      maxv 		}
    307   1.9      maxv 		dat = kmem_zalloc(sizeof(*dat), KM_SLEEP);
    308   1.9      maxv 		dat->vxfer = vxfer;
    309  1.10      maxv 		dat->utoh = utoh;
    310  1.10      maxv 		dat->addr = addr;
    311   1.9      maxv 		dat->buf = xfer->ux_buf;
    312   1.9      maxv 		dat->size = xfer->ux_length;
    313   1.9      maxv 		dat->cursor = 0;
    314   1.9      maxv 		npkts++;
    315   1.1      maxv 	}
    316   1.1      maxv 
    317   1.1      maxv 	/* Insert in the xfer. */
    318   1.1      maxv 	vxfer->port = port;
    319   1.9      maxv 	vxfer->npkts = npkts;
    320   1.2      maxv 	TAILQ_INIT(&vxfer->pkts);
    321   1.2      maxv 	TAILQ_INSERT_TAIL(&vxfer->pkts, req, xferlist);
    322   1.9      maxv 	if (dat != NULL)
    323   1.9      maxv 		TAILQ_INSERT_TAIL(&vxfer->pkts, dat, xferlist);
    324   1.1      maxv 
    325   1.1      maxv 	/* Insert in the port. */
    326   1.3      maxv 	KASSERT(mutex_owned(&port->lock));
    327   1.2      maxv 	TAILQ_INSERT_TAIL(reqlist, req, portlist);
    328   1.9      maxv 	if (dat != NULL)
    329   1.9      maxv 		TAILQ_INSERT_TAIL(datlist, dat, portlist);
    330   1.1      maxv }
    331   1.1      maxv 
    332   1.1      maxv static void
    333   1.1      maxv vhci_pkt_destroy(vhci_softc_t *sc, vhci_packet_t *pkt)
    334   1.1      maxv {
    335   1.9      maxv 	vhci_xfer_t *vxfer = pkt->vxfer;
    336   1.1      maxv 	vhci_port_t *port = vxfer->port;
    337   1.2      maxv 	vhci_packet_list_t *pktlist;
    338   1.1      maxv 
    339   1.1      maxv 	KASSERT(mutex_owned(&port->lock));
    340   1.1      maxv 
    341   1.9      maxv 	/* Remove from the port. */
    342   1.2      maxv 	if (pkt->utoh) {
    343  1.10      maxv 		pktlist = &port->endpoints[pkt->addr].usb_to_host;
    344   1.2      maxv 	} else {
    345  1.10      maxv 		pktlist = &port->endpoints[pkt->addr].host_to_usb;
    346   1.2      maxv 	}
    347   1.2      maxv 	TAILQ_REMOVE(pktlist, pkt, portlist);
    348   1.2      maxv 
    349   1.9      maxv 	/* Remove from the xfer. */
    350   1.2      maxv 	TAILQ_REMOVE(&vxfer->pkts, pkt, xferlist);
    351   1.1      maxv 	kmem_free(pkt, sizeof(*pkt));
    352   1.1      maxv 
    353   1.9      maxv 	/* Unref. */
    354   1.9      maxv 	KASSERT(vxfer->npkts > 0);
    355   1.9      maxv 	vxfer->npkts--;
    356   1.9      maxv 	if (vxfer->npkts > 0)
    357   1.1      maxv 		return;
    358   1.2      maxv 	KASSERT(TAILQ_FIRST(&vxfer->pkts) == NULL);
    359   1.1      maxv }
    360   1.1      maxv 
    361   1.1      maxv /* -------------------------------------------------------------------------- */
    362   1.1      maxv 
    363   1.1      maxv static usbd_status
    364   1.1      maxv vhci_open(struct usbd_pipe *pipe)
    365   1.1      maxv {
    366   1.1      maxv 	struct usbd_device *dev = pipe->up_dev;
    367   1.1      maxv 	struct usbd_bus *bus = dev->ud_bus;
    368   1.1      maxv 	usb_endpoint_descriptor_t *ed = pipe->up_endpoint->ue_edesc;
    369   1.1      maxv 	vhci_softc_t *sc = bus->ub_hcpriv;
    370   1.1      maxv 	uint8_t addr = dev->ud_addr;
    371   1.1      maxv 
    372   1.1      maxv 	if (sc->sc_dying)
    373   1.1      maxv 		return USBD_IOERROR;
    374   1.1      maxv 
    375   1.1      maxv 	DPRINTF("%s: called, type=%d\n", __func__,
    376   1.1      maxv 	    UE_GET_XFERTYPE(ed->bmAttributes));
    377   1.1      maxv 
    378   1.1      maxv 	if (addr == bus->ub_rhaddr) {
    379   1.1      maxv 		switch (ed->bEndpointAddress) {
    380   1.1      maxv 		case USB_CONTROL_ENDPOINT:
    381   1.1      maxv 			DPRINTF("%s: roothub_ctrl\n", __func__);
    382   1.1      maxv 			pipe->up_methods = &roothub_ctrl_methods;
    383   1.1      maxv 			break;
    384   1.1      maxv 		case UE_DIR_IN | USBROOTHUB_INTR_ENDPT:
    385   1.1      maxv 			DPRINTF("%s: root_intr\n", __func__);
    386   1.1      maxv 			pipe->up_methods = &vhci_root_intr_methods;
    387   1.1      maxv 			break;
    388   1.1      maxv 		default:
    389   1.1      maxv 			DPRINTF("%s: inval\n", __func__);
    390   1.1      maxv 			return USBD_INVAL;
    391   1.1      maxv 		}
    392   1.1      maxv 	} else {
    393   1.1      maxv 		switch (UE_GET_XFERTYPE(ed->bmAttributes)) {
    394   1.1      maxv 		case UE_CONTROL:
    395   1.1      maxv 			pipe->up_methods = &vhci_device_ctrl_methods;
    396   1.1      maxv 			break;
    397  1.10      maxv 		case UE_INTERRUPT:
    398   1.1      maxv 		case UE_BULK:
    399   1.1      maxv 		default:
    400   1.1      maxv 			goto bad;
    401   1.1      maxv 		}
    402   1.1      maxv 	}
    403   1.1      maxv 
    404   1.1      maxv 	return USBD_NORMAL_COMPLETION;
    405   1.1      maxv 
    406   1.1      maxv bad:
    407   1.1      maxv 	return USBD_NOMEM;
    408   1.1      maxv }
    409   1.1      maxv 
    410   1.1      maxv static void
    411   1.1      maxv vhci_softintr(void *v)
    412   1.1      maxv {
    413   1.1      maxv 	DPRINTF("%s: called\n", __func__);
    414   1.1      maxv }
    415   1.1      maxv 
    416   1.1      maxv static struct usbd_xfer *
    417   1.1      maxv vhci_allocx(struct usbd_bus *bus, unsigned int nframes)
    418   1.1      maxv {
    419   1.1      maxv 	vhci_xfer_t *vxfer;
    420   1.1      maxv 
    421   1.1      maxv 	vxfer = kmem_zalloc(sizeof(*vxfer), KM_SLEEP);
    422   1.1      maxv #ifdef DIAGNOSTIC
    423   1.1      maxv 	vxfer->xfer.ux_state = XFER_BUSY;
    424   1.1      maxv #endif
    425   1.1      maxv 	return (struct usbd_xfer *)vxfer;
    426   1.1      maxv }
    427   1.1      maxv 
    428   1.1      maxv static void
    429   1.1      maxv vhci_freex(struct usbd_bus *bus, struct usbd_xfer *xfer)
    430   1.1      maxv {
    431   1.1      maxv 	vhci_xfer_t *vxfer = (vhci_xfer_t *)xfer;
    432   1.1      maxv 
    433   1.9      maxv 	KASSERT(vxfer->npkts == 0);
    434   1.2      maxv 	KASSERT(TAILQ_FIRST(&vxfer->pkts) == NULL);
    435   1.1      maxv 
    436   1.1      maxv #ifdef DIAGNOSTIC
    437   1.1      maxv 	vxfer->xfer.ux_state = XFER_FREE;
    438   1.1      maxv #endif
    439   1.1      maxv 	kmem_free(vxfer, sizeof(*vxfer));
    440   1.1      maxv }
    441   1.1      maxv 
    442   1.1      maxv static void
    443   1.1      maxv vhci_get_lock(struct usbd_bus *bus, kmutex_t **lock)
    444   1.1      maxv {
    445   1.1      maxv 	vhci_softc_t *sc = bus->ub_hcpriv;
    446   1.1      maxv 
    447   1.1      maxv 	*lock = &sc->sc_lock;
    448   1.1      maxv }
    449   1.1      maxv 
    450   1.1      maxv static int
    451   1.1      maxv vhci_roothub_ctrl(struct usbd_bus *bus, usb_device_request_t *req,
    452   1.1      maxv     void *buf, int buflen)
    453   1.1      maxv {
    454   1.1      maxv 	vhci_softc_t *sc = bus->ub_hcpriv;
    455   1.1      maxv 	vhci_port_t *port;
    456   1.1      maxv 	usb_hub_descriptor_t hubd;
    457   1.1      maxv 	uint16_t len, value, index;
    458   1.1      maxv 	int totlen = 0;
    459   1.1      maxv 
    460   1.1      maxv 	len = UGETW(req->wLength);
    461   1.1      maxv 	value = UGETW(req->wValue);
    462   1.1      maxv 	index = UGETW(req->wIndex);
    463   1.1      maxv 
    464   1.1      maxv #define C(x,y) ((x) | ((y) << 8))
    465   1.1      maxv 	switch (C(req->bRequest, req->bmRequestType)) {
    466   1.1      maxv 	case C(UR_GET_DESCRIPTOR, UT_READ_DEVICE):
    467   1.1      maxv 		switch (value) {
    468   1.1      maxv 		case C(0, UDESC_DEVICE): {
    469   1.1      maxv 			usb_device_descriptor_t devd;
    470   1.1      maxv 
    471   1.1      maxv 			totlen = uimin(buflen, sizeof(devd));
    472   1.1      maxv 			memcpy(&devd, buf, totlen);
    473   1.1      maxv 			USETW(devd.idVendor, 0);
    474   1.1      maxv 			USETW(devd.idProduct, 0);
    475   1.1      maxv 			memcpy(buf, &devd, totlen);
    476   1.1      maxv 			break;
    477   1.1      maxv 		}
    478   1.1      maxv #define sd ((usb_string_descriptor_t *)buf)
    479   1.1      maxv 		case C(1, UDESC_STRING):
    480   1.1      maxv 			/* Vendor */
    481   1.1      maxv 			totlen = usb_makestrdesc(sd, len, "NetBSD");
    482   1.1      maxv 			break;
    483   1.1      maxv 		case C(2, UDESC_STRING):
    484   1.1      maxv 			/* Product */
    485   1.1      maxv 			totlen = usb_makestrdesc(sd, len, "VHCI root hub");
    486   1.1      maxv 			break;
    487   1.1      maxv #undef sd
    488   1.1      maxv 		default:
    489   1.1      maxv 			/* default from usbroothub */
    490   1.1      maxv 			return buflen;
    491   1.1      maxv 		}
    492   1.1      maxv 		break;
    493   1.1      maxv 
    494   1.1      maxv 	case C(UR_SET_FEATURE, UT_WRITE_CLASS_OTHER):
    495   1.1      maxv 		switch (value) {
    496   1.1      maxv 		case UHF_PORT_RESET:
    497   1.1      maxv 			if (index < 1 || index >= sc->sc_nports) {
    498   1.1      maxv 				return -1;
    499   1.1      maxv 			}
    500   1.4      maxv 			port = &sc->sc_port[VHCI_INDEX2PORT(index)];
    501   1.1      maxv 			port->status |= UPS_C_PORT_RESET;
    502   1.1      maxv 			break;
    503   1.1      maxv 		case UHF_PORT_POWER:
    504   1.1      maxv 			break;
    505   1.1      maxv 		default:
    506   1.1      maxv 			return -1;
    507   1.1      maxv 		}
    508   1.1      maxv 		break;
    509   1.1      maxv 
    510   1.1      maxv 	/* Hub requests. */
    511   1.1      maxv 	case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_DEVICE):
    512   1.1      maxv 		break;
    513   1.1      maxv 	case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_OTHER):
    514   1.1      maxv 		if (index < 1 || index >= sc->sc_nports) {
    515   1.1      maxv 			return -1;
    516   1.1      maxv 		}
    517   1.4      maxv 		port = &sc->sc_port[VHCI_INDEX2PORT(index)];
    518   1.1      maxv 		switch (value) {
    519   1.1      maxv 		case UHF_PORT_ENABLE:
    520   1.1      maxv 			port->status &= ~UPS_PORT_ENABLED;
    521   1.1      maxv 			break;
    522   1.1      maxv 		case UHF_C_PORT_ENABLE:
    523   1.1      maxv 			port->change |= UPS_C_PORT_ENABLED;
    524   1.1      maxv 			break;
    525   1.1      maxv 		default:
    526   1.1      maxv 			return -1;
    527   1.1      maxv 		}
    528   1.1      maxv 		break;
    529   1.1      maxv 
    530   1.1      maxv 	case C(UR_GET_DESCRIPTOR, UT_READ_CLASS_DEVICE):
    531   1.1      maxv 		totlen = uimin(buflen, sizeof(hubd));
    532   1.1      maxv 		memcpy(&hubd, buf, totlen);
    533   1.1      maxv 		hubd.bNbrPorts = sc->sc_nports - 1;
    534   1.1      maxv 		hubd.bDescLength = USB_HUB_DESCRIPTOR_SIZE;
    535   1.1      maxv 		totlen = uimin(totlen, hubd.bDescLength);
    536   1.1      maxv 		memcpy(buf, &hubd, totlen);
    537   1.1      maxv 		break;
    538   1.1      maxv 
    539   1.1      maxv 	case C(UR_GET_STATUS, UT_READ_CLASS_DEVICE):
    540   1.1      maxv 		/* XXX The other HCs do this */
    541   1.1      maxv 		memset(buf, 0, len);
    542   1.1      maxv 		totlen = len;
    543   1.1      maxv 		break;
    544   1.1      maxv 
    545   1.1      maxv 	case C(UR_GET_STATUS, UT_READ_CLASS_OTHER): {
    546   1.1      maxv 		usb_port_status_t ps;
    547   1.1      maxv 
    548   1.1      maxv 		if (index < 1 || index >= sc->sc_nports) {
    549   1.1      maxv 			return -1;
    550   1.1      maxv 		}
    551   1.4      maxv 		port = &sc->sc_port[VHCI_INDEX2PORT(index)];
    552   1.1      maxv 		USETW(ps.wPortStatus, port->status);
    553   1.1      maxv 		USETW(ps.wPortChange, port->change);
    554   1.1      maxv 		totlen = uimin(len, sizeof(ps));
    555   1.1      maxv 		memcpy(buf, &ps, totlen);
    556   1.1      maxv 		break;
    557   1.1      maxv 	}
    558   1.1      maxv 	default:
    559   1.1      maxv 		/* default from usbroothub */
    560   1.1      maxv 		return buflen;
    561   1.1      maxv 	}
    562   1.1      maxv 
    563   1.1      maxv 	return totlen;
    564   1.1      maxv }
    565   1.1      maxv 
    566   1.1      maxv /* -------------------------------------------------------------------------- */
    567   1.1      maxv 
    568   1.1      maxv static usbd_status
    569   1.1      maxv vhci_device_ctrl_transfer(struct usbd_xfer *xfer)
    570   1.1      maxv {
    571   1.1      maxv 	vhci_softc_t *sc = xfer->ux_bus->ub_hcpriv;
    572   1.1      maxv 	usbd_status err;
    573   1.1      maxv 
    574   1.1      maxv 	DPRINTF("%s: called\n", __func__);
    575   1.1      maxv 
    576   1.1      maxv 	/* Insert last in queue. */
    577   1.1      maxv 	mutex_enter(&sc->sc_lock);
    578   1.1      maxv 	err = usb_insert_transfer(xfer);
    579   1.1      maxv 	mutex_exit(&sc->sc_lock);
    580   1.1      maxv 	if (err)
    581   1.1      maxv 		return err;
    582   1.1      maxv 
    583   1.1      maxv 	/* Pipe isn't running, start first */
    584   1.1      maxv 	return vhci_device_ctrl_start(SIMPLEQ_FIRST(&xfer->ux_pipe->up_queue));
    585   1.1      maxv }
    586   1.1      maxv 
    587   1.1      maxv static usbd_status
    588   1.1      maxv vhci_device_ctrl_start(struct usbd_xfer *xfer)
    589   1.1      maxv {
    590  1.10      maxv 	usb_endpoint_descriptor_t *ed = xfer->ux_pipe->up_endpoint->ue_edesc;
    591   1.1      maxv 	usb_device_request_t *req = &xfer->ux_request;
    592   1.1      maxv 	struct usbd_device *dev = xfer->ux_pipe->up_dev;
    593   1.1      maxv 	vhci_softc_t *sc = xfer->ux_bus->ub_hcpriv;
    594   1.1      maxv 	vhci_port_t *port;
    595   1.1      maxv 	bool polling = sc->sc_bus.ub_usepolling;
    596   1.1      maxv 	bool isread = (req->bmRequestType & UT_READ) != 0;
    597  1.10      maxv 	uint8_t addr = UE_GET_ADDR(ed->bEndpointAddress);
    598   1.3      maxv 	int portno, ret;
    599   1.1      maxv 
    600  1.10      maxv 	KASSERT(addr == 0);
    601   1.1      maxv 	KASSERT(xfer->ux_rqflags & URQ_REQUEST);
    602   1.1      maxv 	KASSERT(dev->ud_myhsport != NULL);
    603   1.1      maxv 	portno = dev->ud_myhsport->up_portno;
    604   1.1      maxv 
    605   1.8  christos 	DPRINTF("%s: type=0x%02x, len=%d, isread=%d, portno=%d\n",
    606   1.1      maxv 	    __func__, req->bmRequestType, UGETW(req->wLength), isread, portno);
    607   1.1      maxv 
    608   1.1      maxv 	if (sc->sc_dying)
    609   1.1      maxv 		return USBD_IOERROR;
    610   1.1      maxv 
    611   1.1      maxv 	port = &sc->sc_port[portno];
    612   1.1      maxv 
    613   1.1      maxv 	if (!polling)
    614   1.1      maxv 		mutex_enter(&sc->sc_lock);
    615   1.3      maxv 
    616   1.3      maxv 	mutex_enter(&port->lock);
    617   1.3      maxv 	if (port->status & UPS_PORT_ENABLED) {
    618   1.3      maxv 		xfer->ux_status = USBD_IN_PROGRESS;
    619  1.11      maxv 		vhci_pkt_ctrl_create(port, xfer, isread, addr);
    620   1.3      maxv 		ret = USBD_IN_PROGRESS;
    621   1.3      maxv 	} else {
    622   1.3      maxv 		ret = USBD_IOERROR;
    623   1.3      maxv 	}
    624   1.3      maxv 	mutex_exit(&port->lock);
    625   1.3      maxv 
    626   1.1      maxv 	if (!polling)
    627   1.1      maxv 		mutex_exit(&sc->sc_lock);
    628   1.1      maxv 
    629   1.3      maxv 	return ret;
    630   1.1      maxv }
    631   1.1      maxv 
    632   1.1      maxv static void
    633   1.1      maxv vhci_device_ctrl_abort(struct usbd_xfer *xfer)
    634   1.1      maxv {
    635   1.1      maxv 	vhci_xfer_t *vxfer = (vhci_xfer_t *)xfer;
    636   1.1      maxv 	vhci_softc_t *sc = xfer->ux_bus->ub_hcpriv;
    637   1.1      maxv 	vhci_port_t *port = vxfer->port;
    638   1.1      maxv 	vhci_packet_t *pkt;
    639   1.1      maxv 
    640   1.1      maxv 	DPRINTF("%s: called\n", __func__);
    641   1.1      maxv 
    642   1.1      maxv 	KASSERT(mutex_owned(&sc->sc_lock));
    643   1.1      maxv 
    644   1.1      maxv 	callout_halt(&xfer->ux_callout, &sc->sc_lock);
    645   1.1      maxv 
    646  1.11      maxv 	/* If anyone else beat us, we're done.  */
    647   1.1      maxv 	KASSERT(xfer->ux_status != USBD_CANCELLED);
    648   1.1      maxv 	if (xfer->ux_status != USBD_IN_PROGRESS)
    649   1.1      maxv 		return;
    650   1.1      maxv 
    651   1.1      maxv 	mutex_enter(&port->lock);
    652   1.9      maxv 	while (vxfer->npkts > 0) {
    653   1.2      maxv 		pkt = TAILQ_FIRST(&vxfer->pkts);
    654   1.1      maxv 		KASSERT(pkt != NULL);
    655   1.1      maxv 		vhci_pkt_destroy(sc, pkt);
    656   1.1      maxv 	}
    657   1.2      maxv 	KASSERT(TAILQ_FIRST(&vxfer->pkts) == NULL);
    658   1.1      maxv 	mutex_exit(&port->lock);
    659   1.1      maxv 
    660   1.1      maxv 	xfer->ux_status = USBD_CANCELLED;
    661   1.1      maxv 	usb_transfer_complete(xfer);
    662   1.1      maxv 	KASSERT(mutex_owned(&sc->sc_lock));
    663   1.1      maxv }
    664   1.1      maxv 
    665   1.1      maxv static void
    666   1.1      maxv vhci_device_ctrl_close(struct usbd_pipe *pipe)
    667   1.1      maxv {
    668   1.1      maxv 	DPRINTF("%s: called\n", __func__);
    669   1.1      maxv }
    670   1.1      maxv 
    671   1.1      maxv static void
    672   1.1      maxv vhci_device_ctrl_cleartoggle(struct usbd_pipe *pipe)
    673   1.1      maxv {
    674   1.1      maxv 	DPRINTF("%s: called\n", __func__);
    675   1.1      maxv }
    676   1.1      maxv 
    677   1.1      maxv static void
    678   1.1      maxv vhci_device_ctrl_done(struct usbd_xfer *xfer)
    679   1.1      maxv {
    680   1.1      maxv 	DPRINTF("%s: called\n", __func__);
    681   1.1      maxv }
    682   1.1      maxv 
    683   1.1      maxv /* -------------------------------------------------------------------------- */
    684   1.1      maxv 
    685   1.1      maxv static usbd_status
    686   1.1      maxv vhci_root_intr_transfer(struct usbd_xfer *xfer)
    687   1.1      maxv {
    688   1.1      maxv 	vhci_softc_t *sc = xfer->ux_bus->ub_hcpriv;
    689   1.1      maxv 	usbd_status err;
    690   1.1      maxv 
    691   1.1      maxv 	DPRINTF("%s: called\n", __func__);
    692   1.1      maxv 
    693   1.1      maxv 	/* Insert last in queue. */
    694   1.1      maxv 	mutex_enter(&sc->sc_lock);
    695   1.1      maxv 	err = usb_insert_transfer(xfer);
    696   1.1      maxv 	mutex_exit(&sc->sc_lock);
    697   1.1      maxv 	if (err)
    698   1.1      maxv 		return err;
    699   1.1      maxv 
    700   1.1      maxv 	/* Pipe isn't running, start first */
    701   1.1      maxv 	return vhci_root_intr_start(SIMPLEQ_FIRST(&xfer->ux_pipe->up_queue));
    702   1.1      maxv }
    703   1.1      maxv 
    704   1.1      maxv static usbd_status
    705   1.1      maxv vhci_root_intr_start(struct usbd_xfer *xfer)
    706   1.1      maxv {
    707   1.1      maxv 	vhci_softc_t *sc = xfer->ux_bus->ub_hcpriv;
    708   1.1      maxv 	const bool polling = sc->sc_bus.ub_usepolling;
    709   1.1      maxv 
    710   1.1      maxv 	DPRINTF("%s: called, len=%zu\n", __func__, (size_t)xfer->ux_length);
    711   1.1      maxv 
    712   1.1      maxv 	if (sc->sc_dying)
    713   1.1      maxv 		return USBD_IOERROR;
    714   1.1      maxv 
    715   1.1      maxv 	if (!polling)
    716   1.1      maxv 		mutex_enter(&sc->sc_lock);
    717   1.5  riastrad 	KASSERT(sc->sc_intrxfer == NULL);
    718   1.1      maxv 	sc->sc_intrxfer = xfer;
    719   1.6  riastrad 	xfer->ux_status = USBD_IN_PROGRESS;
    720   1.1      maxv 	if (!polling)
    721   1.1      maxv 		mutex_exit(&sc->sc_lock);
    722   1.1      maxv 
    723   1.1      maxv 	return USBD_IN_PROGRESS;
    724   1.1      maxv }
    725   1.1      maxv 
    726   1.1      maxv static void
    727   1.1      maxv vhci_root_intr_abort(struct usbd_xfer *xfer)
    728   1.1      maxv {
    729   1.1      maxv 	vhci_softc_t *sc = xfer->ux_bus->ub_hcpriv;
    730   1.1      maxv 
    731   1.1      maxv 	DPRINTF("%s: called\n", __func__);
    732   1.1      maxv 
    733   1.1      maxv 	KASSERT(mutex_owned(&sc->sc_lock));
    734   1.1      maxv 	KASSERT(xfer->ux_pipe->up_intrxfer == xfer);
    735   1.1      maxv 
    736   1.5  riastrad 	/* If xfer has already completed, nothing to do here.  */
    737   1.5  riastrad 	if (sc->sc_intrxfer == NULL)
    738   1.5  riastrad 		return;
    739   1.1      maxv 
    740   1.5  riastrad 	/*
    741   1.5  riastrad 	 * Otherwise, sc->sc_intrxfer had better be this transfer.
    742   1.5  riastrad 	 * Cancel it.
    743   1.5  riastrad 	 */
    744   1.5  riastrad 	KASSERT(sc->sc_intrxfer == xfer);
    745   1.6  riastrad 	KASSERT(xfer->ux_status == USBD_IN_PROGRESS);
    746   1.1      maxv 	xfer->ux_status = USBD_CANCELLED;
    747   1.1      maxv 	usb_transfer_complete(xfer);
    748   1.1      maxv }
    749   1.1      maxv 
    750   1.1      maxv static void
    751   1.1      maxv vhci_root_intr_close(struct usbd_pipe *pipe)
    752   1.1      maxv {
    753   1.5  riastrad 	vhci_softc_t *sc __diagused = pipe->up_dev->ud_bus->ub_hcpriv;
    754   1.1      maxv 
    755   1.1      maxv 	DPRINTF("%s: called\n", __func__);
    756   1.1      maxv 
    757   1.1      maxv 	KASSERT(mutex_owned(&sc->sc_lock));
    758   1.1      maxv 
    759   1.5  riastrad 	/*
    760   1.5  riastrad 	 * Caller must guarantee the xfer has completed first, by
    761   1.5  riastrad 	 * closing the pipe only after normal completion or an abort.
    762   1.5  riastrad 	 */
    763   1.5  riastrad 	KASSERT(sc->sc_intrxfer == NULL);
    764   1.1      maxv }
    765   1.1      maxv 
    766   1.1      maxv static void
    767   1.1      maxv vhci_root_intr_cleartoggle(struct usbd_pipe *pipe)
    768   1.1      maxv {
    769   1.1      maxv 	DPRINTF("%s: called\n", __func__);
    770   1.1      maxv }
    771   1.1      maxv 
    772   1.1      maxv static void
    773   1.1      maxv vhci_root_intr_done(struct usbd_xfer *xfer)
    774   1.1      maxv {
    775   1.5  riastrad 	vhci_softc_t *sc = xfer->ux_bus->ub_hcpriv;
    776   1.5  riastrad 
    777   1.5  riastrad 	KASSERT(mutex_owned(&sc->sc_lock));
    778   1.5  riastrad 
    779   1.5  riastrad 	/* Claim the xfer so it doesn't get completed again.  */
    780   1.5  riastrad 	KASSERT(sc->sc_intrxfer == xfer);
    781   1.5  riastrad 	KASSERT(xfer->ux_status != USBD_IN_PROGRESS);
    782   1.5  riastrad 	sc->sc_intrxfer = NULL;
    783   1.1      maxv }
    784   1.1      maxv 
    785   1.1      maxv /* -------------------------------------------------------------------------- */
    786   1.1      maxv 
    787   1.1      maxv struct vhci_ioc_get_info {
    788   1.1      maxv 	/* General. */
    789   1.1      maxv 	size_t nports;
    790   1.1      maxv 
    791   1.1      maxv 	/* Current port. */
    792   1.1      maxv 	u_int port;
    793   1.1      maxv 	int status;
    794  1.10      maxv 
    795  1.10      maxv 	/* Current addr. */
    796  1.10      maxv 	uint8_t addr;
    797   1.1      maxv };
    798   1.1      maxv 
    799   1.1      maxv struct vhci_ioc_set_port {
    800   1.1      maxv 	u_int port;
    801   1.1      maxv };
    802   1.1      maxv 
    803  1.10      maxv struct vhci_ioc_set_addr {
    804  1.10      maxv 	uint8_t addr;
    805  1.10      maxv };
    806  1.10      maxv 
    807   1.1      maxv #define VHCI_IOC_GET_INFO	_IOR('V', 0, struct vhci_ioc_get_info)
    808   1.1      maxv #define VHCI_IOC_SET_PORT	_IOW('V', 1, struct vhci_ioc_set_port)
    809  1.10      maxv #define VHCI_IOC_SET_ADDR	_IOW('V', 2, struct vhci_ioc_set_addr)
    810  1.12      maxv #define VHCI_IOC_USB_ATTACH	_IO ('V', 10)
    811  1.12      maxv #define VHCI_IOC_USB_DETACH	_IO ('V', 11)
    812   1.1      maxv 
    813   1.1      maxv static int
    814  1.12      maxv vhci_usb_attach(vhci_fd_t *vfd)
    815   1.1      maxv {
    816   1.1      maxv 	vhci_softc_t *sc = vfd->softc;
    817   1.1      maxv 	vhci_port_t *port;
    818   1.1      maxv 	struct usbd_xfer *xfer;
    819   1.1      maxv 	u_char *p;
    820   1.1      maxv 	int ret = 0;
    821   1.1      maxv 
    822  1.12      maxv 	port = &sc->sc_port[vfd->port];
    823   1.1      maxv 
    824   1.1      maxv 	mutex_enter(&sc->sc_lock);
    825   1.1      maxv 
    826   1.3      maxv 	mutex_enter(&port->lock);
    827   1.1      maxv 	port->status = UPS_CURRENT_CONNECT_STATUS | UPS_PORT_ENABLED |
    828   1.1      maxv 	    UPS_PORT_POWER;
    829   1.1      maxv 	port->change = UPS_C_CONNECT_STATUS | UPS_C_PORT_RESET;
    830   1.3      maxv 	mutex_exit(&port->lock);
    831   1.1      maxv 
    832   1.1      maxv 	xfer = sc->sc_intrxfer;
    833   1.1      maxv 
    834   1.1      maxv 	if (xfer == NULL) {
    835   1.1      maxv 		ret = ENOBUFS;
    836   1.1      maxv 		goto done;
    837   1.1      maxv 	}
    838   1.6  riastrad 	KASSERT(xfer->ux_status == USBD_IN_PROGRESS);
    839   1.1      maxv 
    840   1.1      maxv 	p = xfer->ux_buf;
    841   1.1      maxv 	memset(p, 0, xfer->ux_length);
    842  1.12      maxv 	p[0] = __BIT(vfd->port);
    843   1.1      maxv 	xfer->ux_actlen = xfer->ux_length;
    844   1.1      maxv 	xfer->ux_status = USBD_NORMAL_COMPLETION;
    845   1.1      maxv 
    846   1.1      maxv 	usb_transfer_complete(xfer);
    847   1.1      maxv 
    848   1.1      maxv done:
    849   1.1      maxv 	mutex_exit(&sc->sc_lock);
    850   1.1      maxv 	return ret;
    851   1.1      maxv }
    852   1.1      maxv 
    853   1.1      maxv static void
    854   1.1      maxv vhci_port_flush(vhci_softc_t *sc, vhci_port_t *port)
    855   1.1      maxv {
    856   1.1      maxv 	vhci_packet_list_t *pktlist;
    857   1.1      maxv 	vhci_packet_t *pkt, *nxt;
    858   1.1      maxv 	vhci_xfer_list_t vxferlist;
    859   1.1      maxv 	vhci_xfer_t *vxfer;
    860  1.10      maxv 	uint8_t addr;
    861   1.1      maxv 
    862   1.1      maxv 	KASSERT(mutex_owned(&sc->sc_lock));
    863   1.3      maxv 	KASSERT(mutex_owned(&port->lock));
    864   1.1      maxv 
    865   1.2      maxv 	TAILQ_INIT(&vxferlist);
    866   1.1      maxv 
    867  1.10      maxv 	for (addr = 0; addr < VHCI_NADDRS; addr++) {
    868  1.10      maxv 		/* Drop all the packets in the H->U direction. */
    869  1.10      maxv 		pktlist = &port->endpoints[addr].host_to_usb;
    870  1.10      maxv 		TAILQ_FOREACH_SAFE(pkt, pktlist, portlist, nxt) {
    871  1.10      maxv 			vxfer = pkt->vxfer;
    872  1.10      maxv 			KASSERT(vxfer->xfer.ux_status == USBD_IN_PROGRESS);
    873  1.10      maxv 			vhci_pkt_destroy(sc, pkt);
    874  1.10      maxv 			if (vxfer->npkts == 0)
    875  1.10      maxv 				TAILQ_INSERT_TAIL(&vxferlist, vxfer, freelist);
    876  1.10      maxv 		}
    877  1.10      maxv 		KASSERT(TAILQ_FIRST(pktlist) == NULL);
    878   1.1      maxv 
    879  1.10      maxv 		/* Drop all the packets in the U->H direction. */
    880  1.10      maxv 		pktlist = &port->endpoints[addr].usb_to_host;
    881  1.10      maxv 		TAILQ_FOREACH_SAFE(pkt, pktlist, portlist, nxt) {
    882  1.10      maxv 			vxfer = pkt->vxfer;
    883  1.10      maxv 			KASSERT(vxfer->xfer.ux_status == USBD_IN_PROGRESS);
    884  1.10      maxv 			vhci_pkt_destroy(sc, pkt);
    885  1.10      maxv 			if (vxfer->npkts == 0)
    886  1.10      maxv 				TAILQ_INSERT_TAIL(&vxferlist, vxfer, freelist);
    887  1.10      maxv 		}
    888  1.10      maxv 		KASSERT(TAILQ_FIRST(pktlist) == NULL);
    889   1.1      maxv 
    890  1.10      maxv 		/* Terminate all the xfers collected. */
    891  1.10      maxv 		while ((vxfer = TAILQ_FIRST(&vxferlist)) != NULL) {
    892  1.10      maxv 			struct usbd_xfer *xfer = &vxfer->xfer;
    893  1.10      maxv 			TAILQ_REMOVE(&vxferlist, vxfer, freelist);
    894   1.1      maxv 
    895  1.10      maxv 			xfer->ux_status = USBD_TIMEOUT;
    896  1.10      maxv 			usb_transfer_complete(xfer);
    897  1.10      maxv 		}
    898   1.1      maxv 	}
    899   1.1      maxv }
    900   1.1      maxv 
    901   1.1      maxv static int
    902  1.12      maxv vhci_usb_detach(vhci_fd_t *vfd)
    903   1.1      maxv {
    904   1.1      maxv 	vhci_softc_t *sc = vfd->softc;
    905   1.1      maxv 	vhci_port_t *port;
    906   1.1      maxv 	struct usbd_xfer *xfer;
    907   1.1      maxv 	u_char *p;
    908   1.1      maxv 
    909  1.12      maxv 	port = &sc->sc_port[vfd->port];
    910   1.1      maxv 
    911   1.1      maxv 	mutex_enter(&sc->sc_lock);
    912   1.1      maxv 
    913   1.1      maxv 	xfer = sc->sc_intrxfer;
    914   1.1      maxv 	if (xfer == NULL) {
    915   1.1      maxv 		mutex_exit(&sc->sc_lock);
    916   1.1      maxv 		return ENOBUFS;
    917   1.1      maxv 	}
    918   1.6  riastrad 	KASSERT(xfer->ux_status == USBD_IN_PROGRESS);
    919   1.1      maxv 
    920   1.3      maxv 	mutex_enter(&port->lock);
    921   1.3      maxv 
    922   1.1      maxv 	port->status = 0;
    923   1.1      maxv 	port->change = UPS_C_CONNECT_STATUS | UPS_C_PORT_RESET;
    924   1.1      maxv 
    925   1.1      maxv 	p = xfer->ux_buf;
    926   1.1      maxv 	memset(p, 0, xfer->ux_length);
    927  1.12      maxv 	p[0] = __BIT(vfd->port);
    928   1.1      maxv 	xfer->ux_actlen = xfer->ux_length;
    929   1.1      maxv 	xfer->ux_status = USBD_NORMAL_COMPLETION;
    930   1.1      maxv 
    931   1.1      maxv 	usb_transfer_complete(xfer);
    932   1.1      maxv 	vhci_port_flush(sc, port);
    933   1.3      maxv 
    934   1.3      maxv 	mutex_exit(&port->lock);
    935   1.1      maxv 	mutex_exit(&sc->sc_lock);
    936   1.1      maxv 	return 0;
    937   1.1      maxv }
    938   1.1      maxv 
    939   1.1      maxv static int
    940   1.1      maxv vhci_get_info(vhci_fd_t *vfd, struct vhci_ioc_get_info *args)
    941   1.1      maxv {
    942   1.1      maxv 	vhci_softc_t *sc = vfd->softc;
    943   1.1      maxv 	vhci_port_t *port;
    944   1.1      maxv 
    945   1.1      maxv 	port = &sc->sc_port[vfd->port];
    946   1.1      maxv 
    947   1.1      maxv 	args->nports = VHCI_NPORTS;
    948   1.1      maxv 	args->port = vfd->port;
    949   1.1      maxv 	mutex_enter(&port->lock);
    950   1.1      maxv 	args->status = port->status;
    951   1.1      maxv 	mutex_exit(&port->lock);
    952  1.10      maxv 	args->addr = vfd->addr;
    953   1.1      maxv 
    954   1.1      maxv 	return 0;
    955   1.1      maxv }
    956   1.1      maxv 
    957   1.1      maxv static int
    958   1.1      maxv vhci_set_port(vhci_fd_t *vfd, struct vhci_ioc_set_port *args)
    959   1.1      maxv {
    960   1.1      maxv 	vhci_softc_t *sc = vfd->softc;
    961   1.1      maxv 
    962   1.1      maxv 	if (args->port == 0 || args->port >= sc->sc_nports)
    963   1.1      maxv 		return EINVAL;
    964   1.1      maxv 
    965   1.1      maxv 	vfd->port = args->port;
    966   1.1      maxv 
    967   1.1      maxv 	return 0;
    968   1.1      maxv }
    969   1.1      maxv 
    970  1.10      maxv static int
    971  1.10      maxv vhci_set_addr(vhci_fd_t *vfd, struct vhci_ioc_set_addr *args)
    972  1.10      maxv {
    973  1.10      maxv 	if (args->addr >= VHCI_NADDRS)
    974  1.10      maxv 		return EINVAL;
    975  1.10      maxv 
    976  1.10      maxv 	vfd->addr = args->addr;
    977  1.10      maxv 
    978  1.10      maxv 	return 0;
    979  1.10      maxv }
    980  1.10      maxv 
    981   1.1      maxv /* -------------------------------------------------------------------------- */
    982   1.1      maxv 
    983   1.1      maxv static dev_type_open(vhci_fd_open);
    984   1.1      maxv 
    985   1.1      maxv const struct cdevsw vhci_cdevsw = {
    986   1.1      maxv 	.d_open = vhci_fd_open,
    987   1.1      maxv 	.d_close = noclose,
    988   1.1      maxv 	.d_read = noread,
    989   1.1      maxv 	.d_write = nowrite,
    990   1.1      maxv 	.d_ioctl = noioctl,
    991   1.1      maxv 	.d_stop = nostop,
    992   1.1      maxv 	.d_tty = notty,
    993   1.1      maxv 	.d_poll = nopoll,
    994   1.1      maxv 	.d_mmap = nommap,
    995   1.1      maxv 	.d_kqfilter = nokqfilter,
    996   1.1      maxv 	.d_discard = nodiscard,
    997   1.1      maxv 	.d_flag = D_OTHER | D_MPSAFE
    998   1.1      maxv };
    999   1.1      maxv 
   1000   1.1      maxv static int vhci_fd_ioctl(file_t *, u_long, void *);
   1001   1.1      maxv static int vhci_fd_close(file_t *);
   1002   1.1      maxv static int vhci_fd_read(struct file *, off_t *, struct uio *, kauth_cred_t, int);
   1003   1.1      maxv static int vhci_fd_write(struct file *, off_t *, struct uio *, kauth_cred_t, int);
   1004   1.1      maxv 
   1005   1.1      maxv const struct fileops vhci_fileops = {
   1006   1.1      maxv 	.fo_read = vhci_fd_read,
   1007   1.1      maxv 	.fo_write = vhci_fd_write,
   1008   1.1      maxv 	.fo_ioctl = vhci_fd_ioctl,
   1009   1.1      maxv 	.fo_fcntl = fnullop_fcntl,
   1010   1.1      maxv 	.fo_poll = fnullop_poll,
   1011   1.1      maxv 	.fo_stat = fbadop_stat,
   1012   1.1      maxv 	.fo_close = vhci_fd_close,
   1013   1.1      maxv 	.fo_kqfilter = fnullop_kqfilter,
   1014   1.1      maxv 	.fo_restart = fnullop_restart,
   1015   1.1      maxv 	.fo_mmap = NULL,
   1016   1.1      maxv };
   1017   1.1      maxv 
   1018   1.1      maxv static int
   1019   1.1      maxv vhci_fd_open(dev_t dev, int flags, int type, struct lwp *l)
   1020   1.1      maxv {
   1021   1.1      maxv 	vhci_fd_t *vfd;
   1022   1.1      maxv 	struct file *fp;
   1023   1.1      maxv 	int error, fd;
   1024   1.1      maxv 
   1025   1.1      maxv 	if (minor(dev) != 0)
   1026   1.1      maxv 		return EXDEV;
   1027   1.1      maxv 	error = fd_allocfile(&fp, &fd);
   1028   1.1      maxv 	if (error)
   1029   1.1      maxv 		return error;
   1030   1.1      maxv 
   1031   1.1      maxv 	vfd = kmem_alloc(sizeof(*vfd), KM_SLEEP);
   1032   1.1      maxv 	vfd->port = 1;
   1033  1.10      maxv 	vfd->addr = 0;
   1034   1.1      maxv 	vfd->softc = device_lookup_private(&vhci_cd, minor(dev));
   1035   1.1      maxv 
   1036   1.1      maxv 	return fd_clone(fp, fd, flags, &vhci_fileops, vfd);
   1037   1.1      maxv }
   1038   1.1      maxv 
   1039   1.1      maxv static int
   1040   1.1      maxv vhci_fd_close(file_t *fp)
   1041   1.1      maxv {
   1042   1.1      maxv 	vhci_fd_t *vfd = fp->f_data;
   1043   1.3      maxv 	int ret __diagused;
   1044   1.1      maxv 
   1045   1.1      maxv 	KASSERT(vfd != NULL);
   1046  1.12      maxv 	ret = vhci_usb_detach(vfd);
   1047   1.3      maxv 	KASSERT(ret == 0);
   1048   1.1      maxv 
   1049   1.1      maxv 	kmem_free(vfd, sizeof(*vfd));
   1050   1.1      maxv 	fp->f_data = NULL;
   1051   1.1      maxv 
   1052   1.1      maxv 	return 0;
   1053   1.1      maxv }
   1054   1.1      maxv 
   1055   1.1      maxv static int
   1056   1.1      maxv vhci_fd_read(struct file *fp, off_t *offp, struct uio *uio, kauth_cred_t cred,
   1057   1.1      maxv     int flags)
   1058   1.1      maxv {
   1059   1.1      maxv 	vhci_fd_t *vfd = fp->f_data;
   1060   1.1      maxv 	vhci_softc_t *sc = vfd->softc;
   1061   1.1      maxv 	vhci_packet_list_t *pktlist;
   1062   1.1      maxv 	vhci_packet_t *pkt, *nxt;
   1063   1.1      maxv 	vhci_xfer_list_t vxferlist;
   1064   1.1      maxv 	vhci_xfer_t *vxfer;
   1065   1.1      maxv 	vhci_port_t *port;
   1066   1.1      maxv 	int error = 0;
   1067   1.1      maxv 	uint8_t *buf;
   1068   1.1      maxv 	size_t size;
   1069   1.1      maxv 
   1070   1.1      maxv 	if (uio->uio_resid == 0)
   1071   1.1      maxv 		return 0;
   1072   1.1      maxv 	port = &sc->sc_port[vfd->port];
   1073  1.10      maxv 	pktlist = &port->endpoints[vfd->addr].host_to_usb;
   1074   1.1      maxv 
   1075   1.2      maxv 	TAILQ_INIT(&vxferlist);
   1076   1.1      maxv 
   1077   1.1      maxv 	mutex_enter(&port->lock);
   1078   1.1      maxv 
   1079   1.1      maxv 	if (!(port->status & UPS_PORT_ENABLED)) {
   1080   1.1      maxv 		error = ENOBUFS;
   1081   1.1      maxv 		goto out;
   1082   1.1      maxv 	}
   1083   1.1      maxv 
   1084   1.2      maxv 	TAILQ_FOREACH_SAFE(pkt, pktlist, portlist, nxt) {
   1085   1.9      maxv 		vxfer = pkt->vxfer;
   1086   1.1      maxv 		buf = pkt->buf + pkt->cursor;
   1087   1.2      maxv 		KASSERT(pkt->size >= pkt->cursor);
   1088   1.1      maxv 		size = uimin(uio->uio_resid, pkt->size - pkt->cursor);
   1089   1.1      maxv 
   1090   1.1      maxv 		KASSERT(vxfer->xfer.ux_status == USBD_IN_PROGRESS);
   1091   1.1      maxv 
   1092   1.1      maxv 		error = uiomove(buf, size, uio);
   1093   1.1      maxv 		if (error) {
   1094   1.1      maxv 			DPRINTF("%s: error = %d\n", __func__, error);
   1095   1.1      maxv 			goto out;
   1096   1.1      maxv 		}
   1097   1.1      maxv 
   1098   1.1      maxv 		pkt->cursor += size;
   1099   1.1      maxv 
   1100   1.1      maxv 		if (pkt->cursor == pkt->size) {
   1101   1.1      maxv 			vhci_pkt_destroy(sc, pkt);
   1102   1.9      maxv 			if (vxfer->npkts == 0) {
   1103   1.2      maxv 				TAILQ_INSERT_TAIL(&vxferlist, vxfer, freelist);
   1104   1.1      maxv 			}
   1105   1.1      maxv 		}
   1106   1.1      maxv 		if (uio->uio_resid == 0) {
   1107   1.1      maxv 			break;
   1108   1.1      maxv 		}
   1109   1.1      maxv 	}
   1110   1.1      maxv 
   1111   1.1      maxv out:
   1112   1.1      maxv 	mutex_exit(&port->lock);
   1113   1.1      maxv 
   1114   1.2      maxv 	while ((vxfer = TAILQ_FIRST(&vxferlist)) != NULL) {
   1115   1.1      maxv 		struct usbd_xfer *xfer = &vxfer->xfer;
   1116   1.2      maxv 		TAILQ_REMOVE(&vxferlist, vxfer, freelist);
   1117   1.1      maxv 
   1118   1.1      maxv 		mutex_enter(&sc->sc_lock);
   1119   1.1      maxv 		xfer->ux_actlen = xfer->ux_length;
   1120   1.1      maxv 		xfer->ux_status = USBD_NORMAL_COMPLETION;
   1121   1.1      maxv 		usb_transfer_complete(xfer);
   1122   1.1      maxv 		mutex_exit(&sc->sc_lock);
   1123   1.1      maxv 	}
   1124   1.1      maxv 
   1125   1.1      maxv 	return error;
   1126   1.1      maxv }
   1127   1.1      maxv 
   1128   1.1      maxv static int
   1129   1.1      maxv vhci_fd_write(struct file *fp, off_t *offp, struct uio *uio, kauth_cred_t cred,
   1130   1.1      maxv     int flags)
   1131   1.1      maxv {
   1132   1.1      maxv 	vhci_fd_t *vfd = fp->f_data;
   1133   1.1      maxv 	vhci_softc_t *sc = vfd->softc;
   1134   1.1      maxv 	vhci_packet_list_t *pktlist;
   1135   1.1      maxv 	vhci_packet_t *pkt, *nxt;
   1136   1.1      maxv 	vhci_xfer_list_t vxferlist;
   1137   1.1      maxv 	vhci_xfer_t *vxfer;
   1138   1.1      maxv 	vhci_port_t *port;
   1139   1.1      maxv 	int error = 0;
   1140   1.1      maxv 	uint8_t *buf;
   1141   1.1      maxv 	size_t size;
   1142   1.1      maxv 
   1143   1.1      maxv 	if (uio->uio_resid == 0)
   1144   1.1      maxv 		return 0;
   1145   1.1      maxv 	port = &sc->sc_port[vfd->port];
   1146  1.10      maxv 	pktlist = &port->endpoints[vfd->addr].usb_to_host;
   1147   1.1      maxv 
   1148   1.2      maxv 	TAILQ_INIT(&vxferlist);
   1149   1.1      maxv 
   1150   1.1      maxv 	mutex_enter(&port->lock);
   1151   1.1      maxv 
   1152   1.1      maxv 	if (!(port->status & UPS_PORT_ENABLED)) {
   1153   1.1      maxv 		error = ENOBUFS;
   1154   1.1      maxv 		goto out;
   1155   1.1      maxv 	}
   1156   1.1      maxv 
   1157   1.2      maxv 	TAILQ_FOREACH_SAFE(pkt, pktlist, portlist, nxt) {
   1158   1.9      maxv 		vxfer = pkt->vxfer;
   1159   1.1      maxv 		buf = pkt->buf + pkt->cursor;
   1160   1.3      maxv 		KASSERT(pkt->size >= pkt->cursor);
   1161   1.1      maxv 		size = uimin(uio->uio_resid, pkt->size - pkt->cursor);
   1162   1.1      maxv 
   1163   1.1      maxv 		KASSERT(vxfer->xfer.ux_status == USBD_IN_PROGRESS);
   1164   1.1      maxv 
   1165   1.1      maxv 		error = uiomove(buf, size, uio);
   1166   1.1      maxv 		if (error) {
   1167   1.1      maxv 			DPRINTF("%s: error = %d\n", __func__, error);
   1168   1.1      maxv 			goto out;
   1169   1.1      maxv 		}
   1170   1.1      maxv 
   1171   1.1      maxv 		pkt->cursor += size;
   1172   1.1      maxv 
   1173   1.1      maxv 		if (pkt->cursor == pkt->size) {
   1174   1.1      maxv 			vhci_pkt_destroy(sc, pkt);
   1175   1.9      maxv 			if (vxfer->npkts == 0) {
   1176   1.2      maxv 				TAILQ_INSERT_TAIL(&vxferlist, vxfer, freelist);
   1177   1.1      maxv 			}
   1178   1.1      maxv 		}
   1179   1.1      maxv 		if (uio->uio_resid == 0) {
   1180   1.1      maxv 			break;
   1181   1.1      maxv 		}
   1182   1.1      maxv 	}
   1183   1.1      maxv 
   1184   1.1      maxv out:
   1185   1.1      maxv 	mutex_exit(&port->lock);
   1186   1.1      maxv 
   1187   1.2      maxv 	while ((vxfer = TAILQ_FIRST(&vxferlist)) != NULL) {
   1188   1.1      maxv 		struct usbd_xfer *xfer = &vxfer->xfer;
   1189   1.2      maxv 		TAILQ_REMOVE(&vxferlist, vxfer, freelist);
   1190   1.1      maxv 
   1191   1.1      maxv 		mutex_enter(&sc->sc_lock);
   1192   1.1      maxv 		xfer->ux_actlen = xfer->ux_length;
   1193   1.1      maxv 		xfer->ux_status = USBD_NORMAL_COMPLETION;
   1194   1.1      maxv 		usb_transfer_complete(xfer);
   1195   1.1      maxv 		mutex_exit(&sc->sc_lock);
   1196   1.1      maxv 	}
   1197   1.1      maxv 
   1198   1.1      maxv 	return error;
   1199   1.1      maxv }
   1200   1.1      maxv 
   1201   1.1      maxv static int
   1202   1.1      maxv vhci_fd_ioctl(file_t *fp, u_long cmd, void *data)
   1203   1.1      maxv {
   1204   1.1      maxv 	vhci_fd_t *vfd = fp->f_data;
   1205   1.1      maxv 
   1206   1.1      maxv 	KASSERT(vfd != NULL);
   1207   1.1      maxv 
   1208   1.1      maxv 	switch (cmd) {
   1209   1.1      maxv 	case VHCI_IOC_GET_INFO:
   1210   1.1      maxv 		return vhci_get_info(vfd, data);
   1211   1.1      maxv 	case VHCI_IOC_SET_PORT:
   1212   1.1      maxv 		return vhci_set_port(vfd, data);
   1213  1.10      maxv 	case VHCI_IOC_SET_ADDR:
   1214  1.10      maxv 		return vhci_set_addr(vfd, data);
   1215   1.1      maxv 	case VHCI_IOC_USB_ATTACH:
   1216  1.12      maxv 		return vhci_usb_attach(vfd);
   1217   1.1      maxv 	case VHCI_IOC_USB_DETACH:
   1218  1.12      maxv 		return vhci_usb_detach(vfd);
   1219   1.1      maxv 	default:
   1220   1.1      maxv 		return EINVAL;
   1221   1.1      maxv 	}
   1222   1.1      maxv }
   1223   1.1      maxv 
   1224   1.1      maxv /* -------------------------------------------------------------------------- */
   1225   1.1      maxv 
   1226   1.1      maxv static int vhci_match(device_t, cfdata_t, void *);
   1227   1.1      maxv static void vhci_attach(device_t, device_t, void *);
   1228   1.3      maxv static int vhci_activate(device_t, enum devact);
   1229   1.1      maxv 
   1230   1.1      maxv CFATTACH_DECL_NEW(vhci, sizeof(vhci_softc_t), vhci_match, vhci_attach,
   1231   1.3      maxv     NULL, vhci_activate);
   1232   1.1      maxv 
   1233   1.1      maxv void
   1234   1.1      maxv vhciattach(int nunits)
   1235   1.1      maxv {
   1236   1.1      maxv 	static struct cfdata vhci_cfdata = {
   1237   1.1      maxv 		.cf_name = "vhci",
   1238   1.1      maxv 		.cf_atname = "vhci",
   1239   1.1      maxv 		.cf_unit = 0,
   1240   1.1      maxv 		.cf_fstate = FSTATE_STAR,
   1241   1.1      maxv 	};
   1242   1.1      maxv 	int error;
   1243   1.1      maxv 
   1244   1.1      maxv 	error = config_cfattach_attach(vhci_cd.cd_name, &vhci_ca);
   1245   1.1      maxv 	if (error) {
   1246   1.1      maxv 		aprint_error("%s: unable to register cfattach\n",
   1247   1.1      maxv 		    vhci_cd.cd_name);
   1248   1.1      maxv 		(void)config_cfdriver_detach(&vhci_cd);
   1249   1.1      maxv 		return;
   1250   1.1      maxv 	}
   1251   1.1      maxv 
   1252   1.1      maxv 	config_attach_pseudo(&vhci_cfdata);
   1253   1.1      maxv }
   1254   1.1      maxv 
   1255   1.1      maxv static int
   1256   1.3      maxv vhci_activate(device_t self, enum devact act)
   1257   1.3      maxv {
   1258   1.3      maxv 	vhci_softc_t *sc = device_private(self);
   1259   1.3      maxv 
   1260   1.3      maxv 	switch (act) {
   1261   1.3      maxv 	case DVACT_DEACTIVATE:
   1262   1.3      maxv 		sc->sc_dying = 1;
   1263   1.3      maxv 		return 0;
   1264   1.3      maxv 	default:
   1265   1.3      maxv 		return EOPNOTSUPP;
   1266   1.3      maxv 	}
   1267   1.3      maxv }
   1268   1.3      maxv 
   1269   1.3      maxv static int
   1270   1.1      maxv vhci_match(device_t parent, cfdata_t match, void *aux)
   1271   1.1      maxv {
   1272   1.1      maxv 	return 1;
   1273   1.1      maxv }
   1274   1.1      maxv 
   1275   1.1      maxv static void
   1276   1.1      maxv vhci_attach(device_t parent, device_t self, void *aux)
   1277   1.1      maxv {
   1278   1.1      maxv 	vhci_softc_t *sc = device_private(self);
   1279   1.1      maxv 	vhci_port_t *port;
   1280  1.10      maxv 	uint8_t addr;
   1281   1.1      maxv 	size_t i;
   1282   1.1      maxv 
   1283   1.1      maxv 	sc->sc_dev = self;
   1284   1.1      maxv 	sc->sc_bus.ub_revision = USBREV_2_0;
   1285   1.1      maxv 	sc->sc_bus.ub_usedma = false;
   1286   1.1      maxv 	sc->sc_bus.ub_methods = &vhci_bus_methods;
   1287   1.1      maxv 	sc->sc_bus.ub_pipesize = sizeof(vhci_pipe_t);
   1288   1.1      maxv 	sc->sc_bus.ub_hcpriv = sc;
   1289   1.1      maxv 	sc->sc_dying = false;
   1290   1.1      maxv 	mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_SOFTUSB);
   1291   1.1      maxv 
   1292   1.1      maxv 	sc->sc_nports = VHCI_NPORTS;
   1293   1.1      maxv 	for (i = 0; i < sc->sc_nports; i++) {
   1294   1.1      maxv 		port = &sc->sc_port[i];
   1295   1.1      maxv 		mutex_init(&port->lock, MUTEX_DEFAULT, IPL_SOFTUSB);
   1296  1.10      maxv 		for (addr = 0; addr < VHCI_NADDRS; addr++) {
   1297  1.10      maxv 			TAILQ_INIT(&port->endpoints[addr].usb_to_host);
   1298  1.10      maxv 			TAILQ_INIT(&port->endpoints[addr].host_to_usb);
   1299  1.10      maxv 		}
   1300   1.1      maxv 	}
   1301   1.1      maxv 
   1302   1.1      maxv 	sc->sc_child = config_found(self, &sc->sc_bus, usbctlprint);
   1303   1.1      maxv }
   1304