vhci.c revision 1.18 1 1.18 maxv /* $NetBSD: vhci.c,v 1.18 2020/05/21 05:58:00 maxv Exp $ */
2 1.1 maxv
3 1.1 maxv /*
4 1.10 maxv * Copyright (c) 2019-2020 The NetBSD Foundation, Inc.
5 1.1 maxv * All rights reserved.
6 1.1 maxv *
7 1.1 maxv * This code is derived from software contributed to The NetBSD Foundation
8 1.1 maxv * by Maxime Villard.
9 1.1 maxv *
10 1.1 maxv * Redistribution and use in source and binary forms, with or without
11 1.1 maxv * modification, are permitted provided that the following conditions
12 1.1 maxv * are met:
13 1.1 maxv * 1. Redistributions of source code must retain the above copyright
14 1.1 maxv * notice, this list of conditions and the following disclaimer.
15 1.1 maxv * 2. Redistributions in binary form must reproduce the above copyright
16 1.1 maxv * notice, this list of conditions and the following disclaimer in the
17 1.1 maxv * documentation and/or other materials provided with the distribution.
18 1.1 maxv *
19 1.1 maxv * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
20 1.1 maxv * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21 1.1 maxv * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22 1.1 maxv * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
23 1.1 maxv * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24 1.1 maxv * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25 1.1 maxv * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 1.1 maxv * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27 1.1 maxv * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28 1.1 maxv * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29 1.1 maxv * POSSIBILITY OF SUCH DAMAGE.
30 1.1 maxv */
31 1.1 maxv
32 1.1 maxv #include <sys/cdefs.h>
33 1.18 maxv __KERNEL_RCSID(0, "$NetBSD: vhci.c,v 1.18 2020/05/21 05:58:00 maxv Exp $");
34 1.1 maxv
35 1.1 maxv #ifdef _KERNEL_OPT
36 1.1 maxv #include "opt_usb.h"
37 1.1 maxv #endif
38 1.1 maxv
39 1.1 maxv #include <sys/param.h>
40 1.1 maxv
41 1.1 maxv #include <sys/bus.h>
42 1.1 maxv #include <sys/cpu.h>
43 1.1 maxv #include <sys/conf.h>
44 1.1 maxv #include <sys/device.h>
45 1.1 maxv #include <sys/kernel.h>
46 1.1 maxv #include <sys/kmem.h>
47 1.1 maxv #include <sys/mutex.h>
48 1.1 maxv #include <sys/proc.h>
49 1.1 maxv #include <sys/queue.h>
50 1.1 maxv #include <sys/systm.h>
51 1.1 maxv #include <sys/mman.h>
52 1.1 maxv #include <sys/file.h>
53 1.1 maxv #include <sys/filedesc.h>
54 1.17 maxv #include <sys/kcov.h>
55 1.1 maxv
56 1.1 maxv #include <machine/endian.h>
57 1.1 maxv
58 1.1 maxv #include "ioconf.h"
59 1.1 maxv
60 1.1 maxv #include <dev/usb/usb.h>
61 1.1 maxv #include <dev/usb/usbdi.h>
62 1.1 maxv #include <dev/usb/usbdivar.h>
63 1.1 maxv
64 1.1 maxv #include <dev/usb/usbroothub.h>
65 1.15 maxv #include <dev/usb/vhci.h>
66 1.1 maxv
67 1.1 maxv #ifdef VHCI_DEBUG
68 1.1 maxv #define DPRINTF(fmt, ...) printf(fmt, __VA_ARGS__)
69 1.1 maxv #else
70 1.1 maxv #define DPRINTF(fmt, ...) __nothing
71 1.1 maxv #endif
72 1.1 maxv
73 1.1 maxv static usbd_status vhci_open(struct usbd_pipe *);
74 1.1 maxv static void vhci_softintr(void *);
75 1.1 maxv
76 1.1 maxv static struct usbd_xfer *vhci_allocx(struct usbd_bus *, unsigned int);
77 1.1 maxv static void vhci_freex(struct usbd_bus *, struct usbd_xfer *);
78 1.1 maxv static void vhci_get_lock(struct usbd_bus *, kmutex_t **);
79 1.1 maxv static int vhci_roothub_ctrl(struct usbd_bus *, usb_device_request_t *,
80 1.1 maxv void *, int);
81 1.1 maxv
82 1.1 maxv static const struct usbd_bus_methods vhci_bus_methods = {
83 1.1 maxv .ubm_open = vhci_open,
84 1.1 maxv .ubm_softint = vhci_softintr,
85 1.1 maxv .ubm_dopoll = NULL,
86 1.1 maxv .ubm_allocx = vhci_allocx,
87 1.1 maxv .ubm_freex = vhci_freex,
88 1.1 maxv .ubm_getlock = vhci_get_lock,
89 1.1 maxv .ubm_rhctrl = vhci_roothub_ctrl,
90 1.1 maxv };
91 1.1 maxv
92 1.1 maxv static usbd_status vhci_device_ctrl_transfer(struct usbd_xfer *);
93 1.1 maxv static usbd_status vhci_device_ctrl_start(struct usbd_xfer *);
94 1.1 maxv static void vhci_device_ctrl_abort(struct usbd_xfer *);
95 1.1 maxv static void vhci_device_ctrl_close(struct usbd_pipe *);
96 1.1 maxv static void vhci_device_ctrl_cleartoggle(struct usbd_pipe *);
97 1.1 maxv static void vhci_device_ctrl_done(struct usbd_xfer *);
98 1.1 maxv
99 1.1 maxv static const struct usbd_pipe_methods vhci_device_ctrl_methods = {
100 1.1 maxv .upm_init = NULL,
101 1.1 maxv .upm_fini = NULL,
102 1.1 maxv .upm_transfer = vhci_device_ctrl_transfer,
103 1.1 maxv .upm_start = vhci_device_ctrl_start,
104 1.1 maxv .upm_abort = vhci_device_ctrl_abort,
105 1.1 maxv .upm_close = vhci_device_ctrl_close,
106 1.1 maxv .upm_cleartoggle = vhci_device_ctrl_cleartoggle,
107 1.1 maxv .upm_done = vhci_device_ctrl_done,
108 1.1 maxv };
109 1.1 maxv
110 1.1 maxv static usbd_status vhci_root_intr_transfer(struct usbd_xfer *);
111 1.1 maxv static usbd_status vhci_root_intr_start(struct usbd_xfer *);
112 1.1 maxv static void vhci_root_intr_abort(struct usbd_xfer *);
113 1.1 maxv static void vhci_root_intr_close(struct usbd_pipe *);
114 1.1 maxv static void vhci_root_intr_cleartoggle(struct usbd_pipe *);
115 1.1 maxv static void vhci_root_intr_done(struct usbd_xfer *);
116 1.1 maxv
117 1.1 maxv static const struct usbd_pipe_methods vhci_root_intr_methods = {
118 1.1 maxv .upm_init = NULL,
119 1.1 maxv .upm_fini = NULL,
120 1.1 maxv .upm_transfer = vhci_root_intr_transfer,
121 1.1 maxv .upm_start = vhci_root_intr_start,
122 1.1 maxv .upm_abort = vhci_root_intr_abort,
123 1.1 maxv .upm_close = vhci_root_intr_close,
124 1.1 maxv .upm_cleartoggle = vhci_root_intr_cleartoggle,
125 1.1 maxv .upm_done = vhci_root_intr_done,
126 1.1 maxv };
127 1.1 maxv
128 1.9 maxv /*
129 1.9 maxv * There are three structures to understand: vxfers, packets, and ports.
130 1.9 maxv *
131 1.9 maxv * Each xfer from the point of view of the USB stack is a vxfer from the point
132 1.9 maxv * of view of vHCI.
133 1.9 maxv *
134 1.9 maxv * A vxfer has a linked list containing a maximum of two packets: a request
135 1.9 maxv * packet and possibly a data packet. Packets basically contain data exchanged
136 1.9 maxv * between the Host and the virtual USB device. A packet is linked to both a
137 1.9 maxv * vxfer and a port.
138 1.9 maxv *
139 1.9 maxv * A port is an abstraction of an actual USB port. Each virtual USB device gets
140 1.9 maxv * connected to a port. A port has two lists:
141 1.9 maxv * - The Usb-To-Host list, containing packets to be fetched from the USB
142 1.9 maxv * device and provided to the host.
143 1.9 maxv * - The Host-To-Usb list, containing packets to be sent from the Host to the
144 1.9 maxv * USB device.
145 1.9 maxv * Request packets are always in the H->U direction. Data packets however can
146 1.9 maxv * be in both the H->U and U->H directions.
147 1.9 maxv *
148 1.9 maxv * With read() and write() operations on /dev/vhci, userland respectively
149 1.9 maxv * "fetches" and "sends" packets from or to the virtual USB device, which
150 1.9 maxv * respectively means reading/inserting packets in the H->U and U->H lists on
151 1.9 maxv * the port where the virtual USB device is connected.
152 1.9 maxv *
153 1.9 maxv * +------------------------------------------------+
154 1.9 maxv * | USB Stack |
155 1.9 maxv * +---------------------^--------------------------+
156 1.9 maxv * |
157 1.9 maxv * +---------------------V--------------------------+
158 1.9 maxv * | +----------------+ +-------------+ |
159 1.9 maxv * | | Request Packet | | Data Packet | Xfer |
160 1.9 maxv * | +-------|--------+ +----|---^----+ |
161 1.9 maxv * +---------|------------------|---|---------------+
162 1.9 maxv * | | |
163 1.9 maxv * | +--------------+ |
164 1.9 maxv * | | |
165 1.9 maxv * +---------|---|------------------|---------------+
166 1.9 maxv * | +---V---V---+ +---------|-+ |
167 1.9 maxv * | | H->U List | | U->H List | vHCI Port |
168 1.9 maxv * | +-----|-----+ +-----^-----+ |
169 1.9 maxv * +-----------|----------------|-------------------+
170 1.9 maxv * | |
171 1.9 maxv * +-----------|----------------|-------------------+
172 1.9 maxv * | +-----V-----+ +-----|-----+ |
173 1.9 maxv * | | read() | | write() | vHCI FD |
174 1.9 maxv * | +-----------+ +-----------+ |
175 1.9 maxv * +------------------------------------------------+
176 1.9 maxv */
177 1.9 maxv
178 1.13 maxv struct vhci_xfer;
179 1.13 maxv
180 1.1 maxv typedef struct vhci_packet {
181 1.11 maxv /* General. */
182 1.2 maxv TAILQ_ENTRY(vhci_packet) portlist;
183 1.2 maxv TAILQ_ENTRY(vhci_packet) xferlist;
184 1.9 maxv struct vhci_xfer *vxfer;
185 1.2 maxv bool utoh;
186 1.10 maxv uint8_t addr;
187 1.11 maxv
188 1.14 maxv /* Type. */
189 1.14 maxv struct {
190 1.14 maxv bool req:1;
191 1.14 maxv bool res:1;
192 1.14 maxv bool dat:1;
193 1.14 maxv } type;
194 1.14 maxv
195 1.11 maxv /* Exposed for FD operations. */
196 1.1 maxv uint8_t *buf;
197 1.1 maxv size_t size;
198 1.1 maxv size_t cursor;
199 1.1 maxv } vhci_packet_t;
200 1.1 maxv
201 1.2 maxv typedef TAILQ_HEAD(, vhci_packet) vhci_packet_list_t;
202 1.1 maxv
203 1.10 maxv #define VHCI_NADDRS 16 /* maximum supported by USB */
204 1.10 maxv
205 1.1 maxv typedef struct {
206 1.1 maxv kmutex_t lock;
207 1.1 maxv int status;
208 1.1 maxv int change;
209 1.1 maxv struct {
210 1.1 maxv vhci_packet_list_t usb_to_host;
211 1.1 maxv vhci_packet_list_t host_to_usb;
212 1.10 maxv } endpoints[VHCI_NADDRS];
213 1.1 maxv } vhci_port_t;
214 1.1 maxv
215 1.1 maxv typedef struct {
216 1.1 maxv struct usbd_pipe pipe;
217 1.1 maxv } vhci_pipe_t;
218 1.1 maxv
219 1.1 maxv typedef struct vhci_xfer {
220 1.1 maxv /* General. */
221 1.1 maxv struct usbd_xfer xfer;
222 1.1 maxv
223 1.9 maxv /* Port where the xfer occurs. */
224 1.1 maxv vhci_port_t *port;
225 1.9 maxv
226 1.9 maxv /* Packets in the xfer. */
227 1.9 maxv size_t npkts;
228 1.1 maxv vhci_packet_list_t pkts;
229 1.9 maxv
230 1.13 maxv /* Header storage. */
231 1.13 maxv vhci_request_t reqbuf;
232 1.14 maxv vhci_response_t resbuf;
233 1.13 maxv
234 1.9 maxv /* Used for G/C. */
235 1.2 maxv TAILQ_ENTRY(vhci_xfer) freelist;
236 1.1 maxv } vhci_xfer_t;
237 1.1 maxv
238 1.2 maxv typedef TAILQ_HEAD(, vhci_xfer) vhci_xfer_list_t;
239 1.1 maxv
240 1.1 maxv #define VHCI_INDEX2PORT(idx) (idx)
241 1.18 maxv #define VHCI_NPORTS 8 /* above 8, update TODO-bitmap */
242 1.1 maxv
243 1.1 maxv typedef struct {
244 1.1 maxv device_t sc_dev;
245 1.1 maxv
246 1.1 maxv struct usbd_bus sc_bus;
247 1.1 maxv bool sc_dying;
248 1.1 maxv kmutex_t sc_lock;
249 1.1 maxv
250 1.1 maxv /*
251 1.1 maxv * Intr Root. Used to attach the devices.
252 1.1 maxv */
253 1.1 maxv struct usbd_xfer *sc_intrxfer;
254 1.1 maxv
255 1.1 maxv /*
256 1.1 maxv * The ports. Zero is for the roothub, one and beyond for the USB
257 1.1 maxv * devices.
258 1.1 maxv */
259 1.1 maxv size_t sc_nports;
260 1.1 maxv vhci_port_t sc_port[VHCI_NPORTS];
261 1.1 maxv
262 1.1 maxv device_t sc_child; /* /dev/usb# device */
263 1.1 maxv } vhci_softc_t;
264 1.1 maxv
265 1.1 maxv typedef struct {
266 1.1 maxv u_int port;
267 1.10 maxv uint8_t addr;
268 1.1 maxv vhci_softc_t *softc;
269 1.1 maxv } vhci_fd_t;
270 1.1 maxv
271 1.1 maxv extern struct cfdriver vhci_cd;
272 1.1 maxv
273 1.1 maxv /* -------------------------------------------------------------------------- */
274 1.1 maxv
275 1.1 maxv static void
276 1.11 maxv vhci_pkt_ctrl_create(vhci_port_t *port, struct usbd_xfer *xfer, bool utoh,
277 1.10 maxv uint8_t addr)
278 1.1 maxv {
279 1.1 maxv vhci_xfer_t *vxfer = (vhci_xfer_t *)xfer;
280 1.14 maxv vhci_packet_list_t *reqlist, *reslist, *datlist = NULL;
281 1.14 maxv vhci_packet_t *req, *res = NULL, *dat = NULL;
282 1.9 maxv size_t npkts = 0;
283 1.1 maxv
284 1.9 maxv /* Request packet. */
285 1.10 maxv reqlist = &port->endpoints[addr].host_to_usb;
286 1.1 maxv req = kmem_zalloc(sizeof(*req), KM_SLEEP);
287 1.9 maxv req->vxfer = vxfer;
288 1.2 maxv req->utoh = false;
289 1.10 maxv req->addr = addr;
290 1.14 maxv req->type.req = true;
291 1.13 maxv req->buf = (uint8_t *)&vxfer->reqbuf;
292 1.13 maxv req->size = sizeof(vxfer->reqbuf);
293 1.1 maxv req->cursor = 0;
294 1.9 maxv npkts++;
295 1.1 maxv
296 1.11 maxv /* Init the request buffer. */
297 1.13 maxv memset(&vxfer->reqbuf, 0, sizeof(vxfer->reqbuf));
298 1.13 maxv vxfer->reqbuf.type = VHCI_REQ_CTRL;
299 1.13 maxv memcpy(&vxfer->reqbuf.u.ctrl, &xfer->ux_request,
300 1.11 maxv sizeof(xfer->ux_request));
301 1.11 maxv
302 1.14 maxv /* Response packet. */
303 1.14 maxv if (utoh && (xfer->ux_length > 0)) {
304 1.14 maxv reslist = &port->endpoints[addr].usb_to_host;
305 1.14 maxv res = kmem_zalloc(sizeof(*res), KM_SLEEP);
306 1.14 maxv res->vxfer = vxfer;
307 1.14 maxv res->utoh = true;
308 1.14 maxv res->addr = addr;
309 1.14 maxv res->type.res = true;
310 1.14 maxv res->buf = (uint8_t *)&vxfer->resbuf;
311 1.14 maxv res->size = sizeof(vxfer->resbuf);
312 1.14 maxv res->cursor = 0;
313 1.14 maxv npkts++;
314 1.14 maxv }
315 1.14 maxv
316 1.1 maxv /* Data packet. */
317 1.2 maxv if (xfer->ux_length > 0) {
318 1.10 maxv if (utoh) {
319 1.10 maxv datlist = &port->endpoints[addr].usb_to_host;
320 1.2 maxv } else {
321 1.10 maxv datlist = &port->endpoints[addr].host_to_usb;
322 1.2 maxv }
323 1.9 maxv dat = kmem_zalloc(sizeof(*dat), KM_SLEEP);
324 1.9 maxv dat->vxfer = vxfer;
325 1.10 maxv dat->utoh = utoh;
326 1.10 maxv dat->addr = addr;
327 1.14 maxv dat->type.dat = true;
328 1.9 maxv dat->buf = xfer->ux_buf;
329 1.9 maxv dat->size = xfer->ux_length;
330 1.9 maxv dat->cursor = 0;
331 1.9 maxv npkts++;
332 1.1 maxv }
333 1.1 maxv
334 1.1 maxv /* Insert in the xfer. */
335 1.1 maxv vxfer->port = port;
336 1.9 maxv vxfer->npkts = npkts;
337 1.2 maxv TAILQ_INIT(&vxfer->pkts);
338 1.2 maxv TAILQ_INSERT_TAIL(&vxfer->pkts, req, xferlist);
339 1.14 maxv if (res != NULL)
340 1.14 maxv TAILQ_INSERT_TAIL(&vxfer->pkts, res, xferlist);
341 1.9 maxv if (dat != NULL)
342 1.9 maxv TAILQ_INSERT_TAIL(&vxfer->pkts, dat, xferlist);
343 1.1 maxv
344 1.1 maxv /* Insert in the port. */
345 1.3 maxv KASSERT(mutex_owned(&port->lock));
346 1.2 maxv TAILQ_INSERT_TAIL(reqlist, req, portlist);
347 1.14 maxv if (res != NULL)
348 1.14 maxv TAILQ_INSERT_TAIL(reslist, res, portlist);
349 1.9 maxv if (dat != NULL)
350 1.9 maxv TAILQ_INSERT_TAIL(datlist, dat, portlist);
351 1.1 maxv }
352 1.1 maxv
353 1.1 maxv static void
354 1.1 maxv vhci_pkt_destroy(vhci_softc_t *sc, vhci_packet_t *pkt)
355 1.1 maxv {
356 1.9 maxv vhci_xfer_t *vxfer = pkt->vxfer;
357 1.1 maxv vhci_port_t *port = vxfer->port;
358 1.2 maxv vhci_packet_list_t *pktlist;
359 1.1 maxv
360 1.1 maxv KASSERT(mutex_owned(&port->lock));
361 1.1 maxv
362 1.9 maxv /* Remove from the port. */
363 1.2 maxv if (pkt->utoh) {
364 1.10 maxv pktlist = &port->endpoints[pkt->addr].usb_to_host;
365 1.2 maxv } else {
366 1.10 maxv pktlist = &port->endpoints[pkt->addr].host_to_usb;
367 1.2 maxv }
368 1.2 maxv TAILQ_REMOVE(pktlist, pkt, portlist);
369 1.2 maxv
370 1.9 maxv /* Remove from the xfer. */
371 1.2 maxv TAILQ_REMOVE(&vxfer->pkts, pkt, xferlist);
372 1.1 maxv kmem_free(pkt, sizeof(*pkt));
373 1.1 maxv
374 1.9 maxv /* Unref. */
375 1.9 maxv KASSERT(vxfer->npkts > 0);
376 1.9 maxv vxfer->npkts--;
377 1.9 maxv if (vxfer->npkts > 0)
378 1.1 maxv return;
379 1.2 maxv KASSERT(TAILQ_FIRST(&vxfer->pkts) == NULL);
380 1.1 maxv }
381 1.1 maxv
382 1.1 maxv /* -------------------------------------------------------------------------- */
383 1.1 maxv
384 1.1 maxv static usbd_status
385 1.1 maxv vhci_open(struct usbd_pipe *pipe)
386 1.1 maxv {
387 1.1 maxv struct usbd_device *dev = pipe->up_dev;
388 1.1 maxv struct usbd_bus *bus = dev->ud_bus;
389 1.1 maxv usb_endpoint_descriptor_t *ed = pipe->up_endpoint->ue_edesc;
390 1.1 maxv vhci_softc_t *sc = bus->ub_hcpriv;
391 1.1 maxv uint8_t addr = dev->ud_addr;
392 1.1 maxv
393 1.1 maxv if (sc->sc_dying)
394 1.1 maxv return USBD_IOERROR;
395 1.1 maxv
396 1.1 maxv DPRINTF("%s: called, type=%d\n", __func__,
397 1.1 maxv UE_GET_XFERTYPE(ed->bmAttributes));
398 1.1 maxv
399 1.1 maxv if (addr == bus->ub_rhaddr) {
400 1.1 maxv switch (ed->bEndpointAddress) {
401 1.1 maxv case USB_CONTROL_ENDPOINT:
402 1.1 maxv DPRINTF("%s: roothub_ctrl\n", __func__);
403 1.1 maxv pipe->up_methods = &roothub_ctrl_methods;
404 1.1 maxv break;
405 1.1 maxv case UE_DIR_IN | USBROOTHUB_INTR_ENDPT:
406 1.1 maxv DPRINTF("%s: root_intr\n", __func__);
407 1.1 maxv pipe->up_methods = &vhci_root_intr_methods;
408 1.1 maxv break;
409 1.1 maxv default:
410 1.1 maxv DPRINTF("%s: inval\n", __func__);
411 1.1 maxv return USBD_INVAL;
412 1.1 maxv }
413 1.1 maxv } else {
414 1.1 maxv switch (UE_GET_XFERTYPE(ed->bmAttributes)) {
415 1.1 maxv case UE_CONTROL:
416 1.1 maxv pipe->up_methods = &vhci_device_ctrl_methods;
417 1.1 maxv break;
418 1.10 maxv case UE_INTERRUPT:
419 1.1 maxv case UE_BULK:
420 1.1 maxv default:
421 1.1 maxv goto bad;
422 1.1 maxv }
423 1.1 maxv }
424 1.1 maxv
425 1.1 maxv return USBD_NORMAL_COMPLETION;
426 1.1 maxv
427 1.1 maxv bad:
428 1.1 maxv return USBD_NOMEM;
429 1.1 maxv }
430 1.1 maxv
431 1.1 maxv static void
432 1.1 maxv vhci_softintr(void *v)
433 1.1 maxv {
434 1.1 maxv DPRINTF("%s: called\n", __func__);
435 1.1 maxv }
436 1.1 maxv
437 1.1 maxv static struct usbd_xfer *
438 1.1 maxv vhci_allocx(struct usbd_bus *bus, unsigned int nframes)
439 1.1 maxv {
440 1.1 maxv vhci_xfer_t *vxfer;
441 1.1 maxv
442 1.1 maxv vxfer = kmem_zalloc(sizeof(*vxfer), KM_SLEEP);
443 1.1 maxv #ifdef DIAGNOSTIC
444 1.1 maxv vxfer->xfer.ux_state = XFER_BUSY;
445 1.1 maxv #endif
446 1.1 maxv return (struct usbd_xfer *)vxfer;
447 1.1 maxv }
448 1.1 maxv
449 1.1 maxv static void
450 1.1 maxv vhci_freex(struct usbd_bus *bus, struct usbd_xfer *xfer)
451 1.1 maxv {
452 1.1 maxv vhci_xfer_t *vxfer = (vhci_xfer_t *)xfer;
453 1.1 maxv
454 1.9 maxv KASSERT(vxfer->npkts == 0);
455 1.2 maxv KASSERT(TAILQ_FIRST(&vxfer->pkts) == NULL);
456 1.1 maxv
457 1.1 maxv #ifdef DIAGNOSTIC
458 1.1 maxv vxfer->xfer.ux_state = XFER_FREE;
459 1.1 maxv #endif
460 1.1 maxv kmem_free(vxfer, sizeof(*vxfer));
461 1.1 maxv }
462 1.1 maxv
463 1.1 maxv static void
464 1.1 maxv vhci_get_lock(struct usbd_bus *bus, kmutex_t **lock)
465 1.1 maxv {
466 1.1 maxv vhci_softc_t *sc = bus->ub_hcpriv;
467 1.1 maxv
468 1.1 maxv *lock = &sc->sc_lock;
469 1.1 maxv }
470 1.1 maxv
471 1.1 maxv static int
472 1.1 maxv vhci_roothub_ctrl(struct usbd_bus *bus, usb_device_request_t *req,
473 1.1 maxv void *buf, int buflen)
474 1.1 maxv {
475 1.1 maxv vhci_softc_t *sc = bus->ub_hcpriv;
476 1.1 maxv vhci_port_t *port;
477 1.1 maxv usb_hub_descriptor_t hubd;
478 1.1 maxv uint16_t len, value, index;
479 1.1 maxv int totlen = 0;
480 1.1 maxv
481 1.1 maxv len = UGETW(req->wLength);
482 1.1 maxv value = UGETW(req->wValue);
483 1.1 maxv index = UGETW(req->wIndex);
484 1.1 maxv
485 1.1 maxv #define C(x,y) ((x) | ((y) << 8))
486 1.1 maxv switch (C(req->bRequest, req->bmRequestType)) {
487 1.1 maxv case C(UR_GET_DESCRIPTOR, UT_READ_DEVICE):
488 1.1 maxv switch (value) {
489 1.1 maxv case C(0, UDESC_DEVICE): {
490 1.1 maxv usb_device_descriptor_t devd;
491 1.1 maxv
492 1.1 maxv totlen = uimin(buflen, sizeof(devd));
493 1.1 maxv memcpy(&devd, buf, totlen);
494 1.1 maxv USETW(devd.idVendor, 0);
495 1.1 maxv USETW(devd.idProduct, 0);
496 1.1 maxv memcpy(buf, &devd, totlen);
497 1.1 maxv break;
498 1.1 maxv }
499 1.1 maxv #define sd ((usb_string_descriptor_t *)buf)
500 1.1 maxv case C(1, UDESC_STRING):
501 1.1 maxv /* Vendor */
502 1.1 maxv totlen = usb_makestrdesc(sd, len, "NetBSD");
503 1.1 maxv break;
504 1.1 maxv case C(2, UDESC_STRING):
505 1.1 maxv /* Product */
506 1.1 maxv totlen = usb_makestrdesc(sd, len, "VHCI root hub");
507 1.1 maxv break;
508 1.1 maxv #undef sd
509 1.1 maxv default:
510 1.1 maxv /* default from usbroothub */
511 1.1 maxv return buflen;
512 1.1 maxv }
513 1.1 maxv break;
514 1.1 maxv
515 1.1 maxv case C(UR_SET_FEATURE, UT_WRITE_CLASS_OTHER):
516 1.1 maxv switch (value) {
517 1.1 maxv case UHF_PORT_RESET:
518 1.1 maxv if (index < 1 || index >= sc->sc_nports) {
519 1.1 maxv return -1;
520 1.1 maxv }
521 1.4 maxv port = &sc->sc_port[VHCI_INDEX2PORT(index)];
522 1.1 maxv port->status |= UPS_C_PORT_RESET;
523 1.1 maxv break;
524 1.1 maxv case UHF_PORT_POWER:
525 1.1 maxv break;
526 1.1 maxv default:
527 1.1 maxv return -1;
528 1.1 maxv }
529 1.1 maxv break;
530 1.1 maxv
531 1.1 maxv /* Hub requests. */
532 1.1 maxv case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_DEVICE):
533 1.1 maxv break;
534 1.1 maxv case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_OTHER):
535 1.1 maxv if (index < 1 || index >= sc->sc_nports) {
536 1.1 maxv return -1;
537 1.1 maxv }
538 1.4 maxv port = &sc->sc_port[VHCI_INDEX2PORT(index)];
539 1.1 maxv switch (value) {
540 1.1 maxv case UHF_PORT_ENABLE:
541 1.1 maxv port->status &= ~UPS_PORT_ENABLED;
542 1.1 maxv break;
543 1.1 maxv case UHF_C_PORT_ENABLE:
544 1.1 maxv port->change |= UPS_C_PORT_ENABLED;
545 1.1 maxv break;
546 1.1 maxv default:
547 1.1 maxv return -1;
548 1.1 maxv }
549 1.1 maxv break;
550 1.1 maxv
551 1.1 maxv case C(UR_GET_DESCRIPTOR, UT_READ_CLASS_DEVICE):
552 1.1 maxv totlen = uimin(buflen, sizeof(hubd));
553 1.1 maxv memcpy(&hubd, buf, totlen);
554 1.1 maxv hubd.bNbrPorts = sc->sc_nports - 1;
555 1.1 maxv hubd.bDescLength = USB_HUB_DESCRIPTOR_SIZE;
556 1.1 maxv totlen = uimin(totlen, hubd.bDescLength);
557 1.1 maxv memcpy(buf, &hubd, totlen);
558 1.1 maxv break;
559 1.1 maxv
560 1.1 maxv case C(UR_GET_STATUS, UT_READ_CLASS_DEVICE):
561 1.1 maxv /* XXX The other HCs do this */
562 1.1 maxv memset(buf, 0, len);
563 1.1 maxv totlen = len;
564 1.1 maxv break;
565 1.1 maxv
566 1.1 maxv case C(UR_GET_STATUS, UT_READ_CLASS_OTHER): {
567 1.1 maxv usb_port_status_t ps;
568 1.1 maxv
569 1.1 maxv if (index < 1 || index >= sc->sc_nports) {
570 1.1 maxv return -1;
571 1.1 maxv }
572 1.4 maxv port = &sc->sc_port[VHCI_INDEX2PORT(index)];
573 1.1 maxv USETW(ps.wPortStatus, port->status);
574 1.1 maxv USETW(ps.wPortChange, port->change);
575 1.1 maxv totlen = uimin(len, sizeof(ps));
576 1.1 maxv memcpy(buf, &ps, totlen);
577 1.1 maxv break;
578 1.1 maxv }
579 1.1 maxv default:
580 1.1 maxv /* default from usbroothub */
581 1.1 maxv return buflen;
582 1.1 maxv }
583 1.1 maxv
584 1.1 maxv return totlen;
585 1.1 maxv }
586 1.1 maxv
587 1.1 maxv /* -------------------------------------------------------------------------- */
588 1.1 maxv
589 1.1 maxv static usbd_status
590 1.1 maxv vhci_device_ctrl_transfer(struct usbd_xfer *xfer)
591 1.1 maxv {
592 1.1 maxv vhci_softc_t *sc = xfer->ux_bus->ub_hcpriv;
593 1.1 maxv usbd_status err;
594 1.1 maxv
595 1.1 maxv DPRINTF("%s: called\n", __func__);
596 1.1 maxv
597 1.1 maxv /* Insert last in queue. */
598 1.1 maxv mutex_enter(&sc->sc_lock);
599 1.1 maxv err = usb_insert_transfer(xfer);
600 1.1 maxv mutex_exit(&sc->sc_lock);
601 1.1 maxv if (err)
602 1.1 maxv return err;
603 1.1 maxv
604 1.1 maxv /* Pipe isn't running, start first */
605 1.1 maxv return vhci_device_ctrl_start(SIMPLEQ_FIRST(&xfer->ux_pipe->up_queue));
606 1.1 maxv }
607 1.1 maxv
608 1.1 maxv static usbd_status
609 1.1 maxv vhci_device_ctrl_start(struct usbd_xfer *xfer)
610 1.1 maxv {
611 1.10 maxv usb_endpoint_descriptor_t *ed = xfer->ux_pipe->up_endpoint->ue_edesc;
612 1.1 maxv usb_device_request_t *req = &xfer->ux_request;
613 1.1 maxv struct usbd_device *dev = xfer->ux_pipe->up_dev;
614 1.1 maxv vhci_softc_t *sc = xfer->ux_bus->ub_hcpriv;
615 1.1 maxv vhci_port_t *port;
616 1.1 maxv bool polling = sc->sc_bus.ub_usepolling;
617 1.1 maxv bool isread = (req->bmRequestType & UT_READ) != 0;
618 1.10 maxv uint8_t addr = UE_GET_ADDR(ed->bEndpointAddress);
619 1.3 maxv int portno, ret;
620 1.1 maxv
621 1.10 maxv KASSERT(addr == 0);
622 1.1 maxv KASSERT(xfer->ux_rqflags & URQ_REQUEST);
623 1.1 maxv KASSERT(dev->ud_myhsport != NULL);
624 1.1 maxv portno = dev->ud_myhsport->up_portno;
625 1.1 maxv
626 1.8 christos DPRINTF("%s: type=0x%02x, len=%d, isread=%d, portno=%d\n",
627 1.1 maxv __func__, req->bmRequestType, UGETW(req->wLength), isread, portno);
628 1.1 maxv
629 1.1 maxv if (sc->sc_dying)
630 1.1 maxv return USBD_IOERROR;
631 1.1 maxv
632 1.1 maxv port = &sc->sc_port[portno];
633 1.1 maxv
634 1.1 maxv if (!polling)
635 1.1 maxv mutex_enter(&sc->sc_lock);
636 1.3 maxv
637 1.3 maxv mutex_enter(&port->lock);
638 1.3 maxv if (port->status & UPS_PORT_ENABLED) {
639 1.3 maxv xfer->ux_status = USBD_IN_PROGRESS;
640 1.11 maxv vhci_pkt_ctrl_create(port, xfer, isread, addr);
641 1.3 maxv ret = USBD_IN_PROGRESS;
642 1.3 maxv } else {
643 1.3 maxv ret = USBD_IOERROR;
644 1.3 maxv }
645 1.3 maxv mutex_exit(&port->lock);
646 1.3 maxv
647 1.1 maxv if (!polling)
648 1.1 maxv mutex_exit(&sc->sc_lock);
649 1.1 maxv
650 1.3 maxv return ret;
651 1.1 maxv }
652 1.1 maxv
653 1.1 maxv static void
654 1.1 maxv vhci_device_ctrl_abort(struct usbd_xfer *xfer)
655 1.1 maxv {
656 1.1 maxv vhci_xfer_t *vxfer = (vhci_xfer_t *)xfer;
657 1.1 maxv vhci_softc_t *sc = xfer->ux_bus->ub_hcpriv;
658 1.1 maxv vhci_port_t *port = vxfer->port;
659 1.1 maxv vhci_packet_t *pkt;
660 1.1 maxv
661 1.1 maxv DPRINTF("%s: called\n", __func__);
662 1.1 maxv
663 1.1 maxv KASSERT(mutex_owned(&sc->sc_lock));
664 1.1 maxv
665 1.1 maxv callout_halt(&xfer->ux_callout, &sc->sc_lock);
666 1.1 maxv
667 1.11 maxv /* If anyone else beat us, we're done. */
668 1.1 maxv KASSERT(xfer->ux_status != USBD_CANCELLED);
669 1.1 maxv if (xfer->ux_status != USBD_IN_PROGRESS)
670 1.1 maxv return;
671 1.1 maxv
672 1.1 maxv mutex_enter(&port->lock);
673 1.9 maxv while (vxfer->npkts > 0) {
674 1.2 maxv pkt = TAILQ_FIRST(&vxfer->pkts);
675 1.1 maxv KASSERT(pkt != NULL);
676 1.1 maxv vhci_pkt_destroy(sc, pkt);
677 1.1 maxv }
678 1.2 maxv KASSERT(TAILQ_FIRST(&vxfer->pkts) == NULL);
679 1.1 maxv mutex_exit(&port->lock);
680 1.1 maxv
681 1.1 maxv xfer->ux_status = USBD_CANCELLED;
682 1.1 maxv usb_transfer_complete(xfer);
683 1.1 maxv KASSERT(mutex_owned(&sc->sc_lock));
684 1.1 maxv }
685 1.1 maxv
686 1.1 maxv static void
687 1.1 maxv vhci_device_ctrl_close(struct usbd_pipe *pipe)
688 1.1 maxv {
689 1.1 maxv DPRINTF("%s: called\n", __func__);
690 1.1 maxv }
691 1.1 maxv
692 1.1 maxv static void
693 1.1 maxv vhci_device_ctrl_cleartoggle(struct usbd_pipe *pipe)
694 1.1 maxv {
695 1.1 maxv DPRINTF("%s: called\n", __func__);
696 1.1 maxv }
697 1.1 maxv
698 1.1 maxv static void
699 1.1 maxv vhci_device_ctrl_done(struct usbd_xfer *xfer)
700 1.1 maxv {
701 1.1 maxv DPRINTF("%s: called\n", __func__);
702 1.1 maxv }
703 1.1 maxv
704 1.1 maxv /* -------------------------------------------------------------------------- */
705 1.1 maxv
706 1.1 maxv static usbd_status
707 1.1 maxv vhci_root_intr_transfer(struct usbd_xfer *xfer)
708 1.1 maxv {
709 1.1 maxv vhci_softc_t *sc = xfer->ux_bus->ub_hcpriv;
710 1.1 maxv usbd_status err;
711 1.1 maxv
712 1.1 maxv DPRINTF("%s: called\n", __func__);
713 1.1 maxv
714 1.1 maxv /* Insert last in queue. */
715 1.1 maxv mutex_enter(&sc->sc_lock);
716 1.1 maxv err = usb_insert_transfer(xfer);
717 1.1 maxv mutex_exit(&sc->sc_lock);
718 1.1 maxv if (err)
719 1.1 maxv return err;
720 1.1 maxv
721 1.1 maxv /* Pipe isn't running, start first */
722 1.1 maxv return vhci_root_intr_start(SIMPLEQ_FIRST(&xfer->ux_pipe->up_queue));
723 1.1 maxv }
724 1.1 maxv
725 1.1 maxv static usbd_status
726 1.1 maxv vhci_root_intr_start(struct usbd_xfer *xfer)
727 1.1 maxv {
728 1.1 maxv vhci_softc_t *sc = xfer->ux_bus->ub_hcpriv;
729 1.1 maxv const bool polling = sc->sc_bus.ub_usepolling;
730 1.1 maxv
731 1.1 maxv DPRINTF("%s: called, len=%zu\n", __func__, (size_t)xfer->ux_length);
732 1.1 maxv
733 1.1 maxv if (sc->sc_dying)
734 1.1 maxv return USBD_IOERROR;
735 1.1 maxv
736 1.1 maxv if (!polling)
737 1.1 maxv mutex_enter(&sc->sc_lock);
738 1.5 riastrad KASSERT(sc->sc_intrxfer == NULL);
739 1.1 maxv sc->sc_intrxfer = xfer;
740 1.6 riastrad xfer->ux_status = USBD_IN_PROGRESS;
741 1.1 maxv if (!polling)
742 1.1 maxv mutex_exit(&sc->sc_lock);
743 1.1 maxv
744 1.1 maxv return USBD_IN_PROGRESS;
745 1.1 maxv }
746 1.1 maxv
747 1.1 maxv static void
748 1.1 maxv vhci_root_intr_abort(struct usbd_xfer *xfer)
749 1.1 maxv {
750 1.1 maxv vhci_softc_t *sc = xfer->ux_bus->ub_hcpriv;
751 1.1 maxv
752 1.1 maxv DPRINTF("%s: called\n", __func__);
753 1.1 maxv
754 1.1 maxv KASSERT(mutex_owned(&sc->sc_lock));
755 1.1 maxv KASSERT(xfer->ux_pipe->up_intrxfer == xfer);
756 1.1 maxv
757 1.5 riastrad /* If xfer has already completed, nothing to do here. */
758 1.5 riastrad if (sc->sc_intrxfer == NULL)
759 1.5 riastrad return;
760 1.1 maxv
761 1.5 riastrad /*
762 1.5 riastrad * Otherwise, sc->sc_intrxfer had better be this transfer.
763 1.5 riastrad * Cancel it.
764 1.5 riastrad */
765 1.5 riastrad KASSERT(sc->sc_intrxfer == xfer);
766 1.6 riastrad KASSERT(xfer->ux_status == USBD_IN_PROGRESS);
767 1.1 maxv xfer->ux_status = USBD_CANCELLED;
768 1.1 maxv usb_transfer_complete(xfer);
769 1.1 maxv }
770 1.1 maxv
771 1.1 maxv static void
772 1.1 maxv vhci_root_intr_close(struct usbd_pipe *pipe)
773 1.1 maxv {
774 1.5 riastrad vhci_softc_t *sc __diagused = pipe->up_dev->ud_bus->ub_hcpriv;
775 1.1 maxv
776 1.1 maxv DPRINTF("%s: called\n", __func__);
777 1.1 maxv
778 1.1 maxv KASSERT(mutex_owned(&sc->sc_lock));
779 1.1 maxv
780 1.5 riastrad /*
781 1.5 riastrad * Caller must guarantee the xfer has completed first, by
782 1.5 riastrad * closing the pipe only after normal completion or an abort.
783 1.5 riastrad */
784 1.5 riastrad KASSERT(sc->sc_intrxfer == NULL);
785 1.1 maxv }
786 1.1 maxv
787 1.1 maxv static void
788 1.1 maxv vhci_root_intr_cleartoggle(struct usbd_pipe *pipe)
789 1.1 maxv {
790 1.1 maxv DPRINTF("%s: called\n", __func__);
791 1.1 maxv }
792 1.1 maxv
793 1.1 maxv static void
794 1.1 maxv vhci_root_intr_done(struct usbd_xfer *xfer)
795 1.1 maxv {
796 1.5 riastrad vhci_softc_t *sc = xfer->ux_bus->ub_hcpriv;
797 1.5 riastrad
798 1.5 riastrad KASSERT(mutex_owned(&sc->sc_lock));
799 1.5 riastrad
800 1.5 riastrad /* Claim the xfer so it doesn't get completed again. */
801 1.5 riastrad KASSERT(sc->sc_intrxfer == xfer);
802 1.5 riastrad KASSERT(xfer->ux_status != USBD_IN_PROGRESS);
803 1.5 riastrad sc->sc_intrxfer = NULL;
804 1.1 maxv }
805 1.1 maxv
806 1.1 maxv /* -------------------------------------------------------------------------- */
807 1.1 maxv
808 1.1 maxv static int
809 1.12 maxv vhci_usb_attach(vhci_fd_t *vfd)
810 1.1 maxv {
811 1.1 maxv vhci_softc_t *sc = vfd->softc;
812 1.1 maxv vhci_port_t *port;
813 1.1 maxv struct usbd_xfer *xfer;
814 1.1 maxv u_char *p;
815 1.1 maxv int ret = 0;
816 1.1 maxv
817 1.12 maxv port = &sc->sc_port[vfd->port];
818 1.1 maxv
819 1.1 maxv mutex_enter(&sc->sc_lock);
820 1.1 maxv
821 1.3 maxv mutex_enter(&port->lock);
822 1.1 maxv port->status = UPS_CURRENT_CONNECT_STATUS | UPS_PORT_ENABLED |
823 1.1 maxv UPS_PORT_POWER;
824 1.1 maxv port->change = UPS_C_CONNECT_STATUS | UPS_C_PORT_RESET;
825 1.3 maxv mutex_exit(&port->lock);
826 1.1 maxv
827 1.1 maxv xfer = sc->sc_intrxfer;
828 1.1 maxv
829 1.1 maxv if (xfer == NULL) {
830 1.1 maxv ret = ENOBUFS;
831 1.1 maxv goto done;
832 1.1 maxv }
833 1.6 riastrad KASSERT(xfer->ux_status == USBD_IN_PROGRESS);
834 1.1 maxv
835 1.1 maxv p = xfer->ux_buf;
836 1.1 maxv memset(p, 0, xfer->ux_length);
837 1.18 maxv p[0] = __BIT(vfd->port); /* TODO-bitmap */
838 1.1 maxv xfer->ux_actlen = xfer->ux_length;
839 1.1 maxv xfer->ux_status = USBD_NORMAL_COMPLETION;
840 1.1 maxv
841 1.1 maxv usb_transfer_complete(xfer);
842 1.1 maxv
843 1.1 maxv done:
844 1.1 maxv mutex_exit(&sc->sc_lock);
845 1.1 maxv return ret;
846 1.1 maxv }
847 1.1 maxv
848 1.1 maxv static void
849 1.1 maxv vhci_port_flush(vhci_softc_t *sc, vhci_port_t *port)
850 1.1 maxv {
851 1.1 maxv vhci_packet_list_t *pktlist;
852 1.1 maxv vhci_packet_t *pkt, *nxt;
853 1.1 maxv vhci_xfer_list_t vxferlist;
854 1.1 maxv vhci_xfer_t *vxfer;
855 1.10 maxv uint8_t addr;
856 1.1 maxv
857 1.1 maxv KASSERT(mutex_owned(&sc->sc_lock));
858 1.3 maxv KASSERT(mutex_owned(&port->lock));
859 1.1 maxv
860 1.2 maxv TAILQ_INIT(&vxferlist);
861 1.1 maxv
862 1.10 maxv for (addr = 0; addr < VHCI_NADDRS; addr++) {
863 1.10 maxv /* Drop all the packets in the H->U direction. */
864 1.10 maxv pktlist = &port->endpoints[addr].host_to_usb;
865 1.10 maxv TAILQ_FOREACH_SAFE(pkt, pktlist, portlist, nxt) {
866 1.10 maxv vxfer = pkt->vxfer;
867 1.10 maxv KASSERT(vxfer->xfer.ux_status == USBD_IN_PROGRESS);
868 1.10 maxv vhci_pkt_destroy(sc, pkt);
869 1.10 maxv if (vxfer->npkts == 0)
870 1.10 maxv TAILQ_INSERT_TAIL(&vxferlist, vxfer, freelist);
871 1.10 maxv }
872 1.10 maxv KASSERT(TAILQ_FIRST(pktlist) == NULL);
873 1.1 maxv
874 1.10 maxv /* Drop all the packets in the U->H direction. */
875 1.10 maxv pktlist = &port->endpoints[addr].usb_to_host;
876 1.10 maxv TAILQ_FOREACH_SAFE(pkt, pktlist, portlist, nxt) {
877 1.10 maxv vxfer = pkt->vxfer;
878 1.10 maxv KASSERT(vxfer->xfer.ux_status == USBD_IN_PROGRESS);
879 1.10 maxv vhci_pkt_destroy(sc, pkt);
880 1.10 maxv if (vxfer->npkts == 0)
881 1.10 maxv TAILQ_INSERT_TAIL(&vxferlist, vxfer, freelist);
882 1.10 maxv }
883 1.10 maxv KASSERT(TAILQ_FIRST(pktlist) == NULL);
884 1.1 maxv
885 1.10 maxv /* Terminate all the xfers collected. */
886 1.10 maxv while ((vxfer = TAILQ_FIRST(&vxferlist)) != NULL) {
887 1.10 maxv struct usbd_xfer *xfer = &vxfer->xfer;
888 1.10 maxv TAILQ_REMOVE(&vxferlist, vxfer, freelist);
889 1.1 maxv
890 1.10 maxv xfer->ux_status = USBD_TIMEOUT;
891 1.10 maxv usb_transfer_complete(xfer);
892 1.10 maxv }
893 1.1 maxv }
894 1.1 maxv }
895 1.1 maxv
896 1.1 maxv static int
897 1.12 maxv vhci_usb_detach(vhci_fd_t *vfd)
898 1.1 maxv {
899 1.1 maxv vhci_softc_t *sc = vfd->softc;
900 1.1 maxv vhci_port_t *port;
901 1.1 maxv struct usbd_xfer *xfer;
902 1.1 maxv u_char *p;
903 1.1 maxv
904 1.12 maxv port = &sc->sc_port[vfd->port];
905 1.1 maxv
906 1.1 maxv mutex_enter(&sc->sc_lock);
907 1.1 maxv
908 1.1 maxv xfer = sc->sc_intrxfer;
909 1.1 maxv if (xfer == NULL) {
910 1.1 maxv mutex_exit(&sc->sc_lock);
911 1.1 maxv return ENOBUFS;
912 1.1 maxv }
913 1.6 riastrad KASSERT(xfer->ux_status == USBD_IN_PROGRESS);
914 1.1 maxv
915 1.3 maxv mutex_enter(&port->lock);
916 1.3 maxv
917 1.1 maxv port->status = 0;
918 1.1 maxv port->change = UPS_C_CONNECT_STATUS | UPS_C_PORT_RESET;
919 1.1 maxv
920 1.1 maxv p = xfer->ux_buf;
921 1.1 maxv memset(p, 0, xfer->ux_length);
922 1.12 maxv p[0] = __BIT(vfd->port);
923 1.1 maxv xfer->ux_actlen = xfer->ux_length;
924 1.1 maxv xfer->ux_status = USBD_NORMAL_COMPLETION;
925 1.1 maxv
926 1.1 maxv usb_transfer_complete(xfer);
927 1.1 maxv vhci_port_flush(sc, port);
928 1.3 maxv
929 1.3 maxv mutex_exit(&port->lock);
930 1.1 maxv mutex_exit(&sc->sc_lock);
931 1.1 maxv return 0;
932 1.1 maxv }
933 1.1 maxv
934 1.1 maxv static int
935 1.1 maxv vhci_get_info(vhci_fd_t *vfd, struct vhci_ioc_get_info *args)
936 1.1 maxv {
937 1.1 maxv vhci_softc_t *sc = vfd->softc;
938 1.1 maxv vhci_port_t *port;
939 1.1 maxv
940 1.1 maxv port = &sc->sc_port[vfd->port];
941 1.1 maxv
942 1.1 maxv args->nports = VHCI_NPORTS;
943 1.1 maxv args->port = vfd->port;
944 1.1 maxv mutex_enter(&port->lock);
945 1.1 maxv args->status = port->status;
946 1.1 maxv mutex_exit(&port->lock);
947 1.10 maxv args->addr = vfd->addr;
948 1.1 maxv
949 1.1 maxv return 0;
950 1.1 maxv }
951 1.1 maxv
952 1.1 maxv static int
953 1.1 maxv vhci_set_port(vhci_fd_t *vfd, struct vhci_ioc_set_port *args)
954 1.1 maxv {
955 1.1 maxv vhci_softc_t *sc = vfd->softc;
956 1.1 maxv
957 1.1 maxv if (args->port == 0 || args->port >= sc->sc_nports)
958 1.1 maxv return EINVAL;
959 1.1 maxv
960 1.1 maxv vfd->port = args->port;
961 1.1 maxv
962 1.1 maxv return 0;
963 1.1 maxv }
964 1.1 maxv
965 1.10 maxv static int
966 1.10 maxv vhci_set_addr(vhci_fd_t *vfd, struct vhci_ioc_set_addr *args)
967 1.10 maxv {
968 1.10 maxv if (args->addr >= VHCI_NADDRS)
969 1.10 maxv return EINVAL;
970 1.10 maxv
971 1.10 maxv vfd->addr = args->addr;
972 1.10 maxv
973 1.10 maxv return 0;
974 1.10 maxv }
975 1.10 maxv
976 1.1 maxv /* -------------------------------------------------------------------------- */
977 1.1 maxv
978 1.1 maxv static dev_type_open(vhci_fd_open);
979 1.1 maxv
980 1.1 maxv const struct cdevsw vhci_cdevsw = {
981 1.1 maxv .d_open = vhci_fd_open,
982 1.1 maxv .d_close = noclose,
983 1.1 maxv .d_read = noread,
984 1.1 maxv .d_write = nowrite,
985 1.1 maxv .d_ioctl = noioctl,
986 1.1 maxv .d_stop = nostop,
987 1.1 maxv .d_tty = notty,
988 1.1 maxv .d_poll = nopoll,
989 1.1 maxv .d_mmap = nommap,
990 1.1 maxv .d_kqfilter = nokqfilter,
991 1.1 maxv .d_discard = nodiscard,
992 1.1 maxv .d_flag = D_OTHER | D_MPSAFE
993 1.1 maxv };
994 1.1 maxv
995 1.1 maxv static int vhci_fd_ioctl(file_t *, u_long, void *);
996 1.1 maxv static int vhci_fd_close(file_t *);
997 1.1 maxv static int vhci_fd_read(struct file *, off_t *, struct uio *, kauth_cred_t, int);
998 1.1 maxv static int vhci_fd_write(struct file *, off_t *, struct uio *, kauth_cred_t, int);
999 1.1 maxv
1000 1.1 maxv const struct fileops vhci_fileops = {
1001 1.1 maxv .fo_read = vhci_fd_read,
1002 1.1 maxv .fo_write = vhci_fd_write,
1003 1.1 maxv .fo_ioctl = vhci_fd_ioctl,
1004 1.1 maxv .fo_fcntl = fnullop_fcntl,
1005 1.1 maxv .fo_poll = fnullop_poll,
1006 1.1 maxv .fo_stat = fbadop_stat,
1007 1.1 maxv .fo_close = vhci_fd_close,
1008 1.1 maxv .fo_kqfilter = fnullop_kqfilter,
1009 1.1 maxv .fo_restart = fnullop_restart,
1010 1.1 maxv .fo_mmap = NULL,
1011 1.1 maxv };
1012 1.1 maxv
1013 1.1 maxv static int
1014 1.1 maxv vhci_fd_open(dev_t dev, int flags, int type, struct lwp *l)
1015 1.1 maxv {
1016 1.1 maxv vhci_fd_t *vfd;
1017 1.1 maxv struct file *fp;
1018 1.1 maxv int error, fd;
1019 1.1 maxv
1020 1.1 maxv if (minor(dev) != 0)
1021 1.1 maxv return EXDEV;
1022 1.1 maxv error = fd_allocfile(&fp, &fd);
1023 1.1 maxv if (error)
1024 1.1 maxv return error;
1025 1.1 maxv
1026 1.1 maxv vfd = kmem_alloc(sizeof(*vfd), KM_SLEEP);
1027 1.1 maxv vfd->port = 1;
1028 1.10 maxv vfd->addr = 0;
1029 1.1 maxv vfd->softc = device_lookup_private(&vhci_cd, minor(dev));
1030 1.1 maxv
1031 1.1 maxv return fd_clone(fp, fd, flags, &vhci_fileops, vfd);
1032 1.1 maxv }
1033 1.1 maxv
1034 1.1 maxv static int
1035 1.1 maxv vhci_fd_close(file_t *fp)
1036 1.1 maxv {
1037 1.1 maxv vhci_fd_t *vfd = fp->f_data;
1038 1.3 maxv int ret __diagused;
1039 1.1 maxv
1040 1.1 maxv KASSERT(vfd != NULL);
1041 1.12 maxv ret = vhci_usb_detach(vfd);
1042 1.3 maxv KASSERT(ret == 0);
1043 1.1 maxv
1044 1.1 maxv kmem_free(vfd, sizeof(*vfd));
1045 1.1 maxv fp->f_data = NULL;
1046 1.1 maxv
1047 1.1 maxv return 0;
1048 1.1 maxv }
1049 1.1 maxv
1050 1.1 maxv static int
1051 1.1 maxv vhci_fd_read(struct file *fp, off_t *offp, struct uio *uio, kauth_cred_t cred,
1052 1.1 maxv int flags)
1053 1.1 maxv {
1054 1.1 maxv vhci_fd_t *vfd = fp->f_data;
1055 1.1 maxv vhci_softc_t *sc = vfd->softc;
1056 1.1 maxv vhci_packet_list_t *pktlist;
1057 1.1 maxv vhci_packet_t *pkt, *nxt;
1058 1.1 maxv vhci_xfer_list_t vxferlist;
1059 1.1 maxv vhci_xfer_t *vxfer;
1060 1.1 maxv vhci_port_t *port;
1061 1.1 maxv int error = 0;
1062 1.1 maxv uint8_t *buf;
1063 1.1 maxv size_t size;
1064 1.1 maxv
1065 1.1 maxv if (uio->uio_resid == 0)
1066 1.1 maxv return 0;
1067 1.1 maxv port = &sc->sc_port[vfd->port];
1068 1.10 maxv pktlist = &port->endpoints[vfd->addr].host_to_usb;
1069 1.1 maxv
1070 1.2 maxv TAILQ_INIT(&vxferlist);
1071 1.1 maxv
1072 1.1 maxv mutex_enter(&port->lock);
1073 1.1 maxv
1074 1.1 maxv if (!(port->status & UPS_PORT_ENABLED)) {
1075 1.1 maxv error = ENOBUFS;
1076 1.1 maxv goto out;
1077 1.1 maxv }
1078 1.1 maxv
1079 1.2 maxv TAILQ_FOREACH_SAFE(pkt, pktlist, portlist, nxt) {
1080 1.9 maxv vxfer = pkt->vxfer;
1081 1.1 maxv buf = pkt->buf + pkt->cursor;
1082 1.14 maxv
1083 1.2 maxv KASSERT(pkt->size >= pkt->cursor);
1084 1.1 maxv size = uimin(uio->uio_resid, pkt->size - pkt->cursor);
1085 1.1 maxv
1086 1.1 maxv KASSERT(vxfer->xfer.ux_status == USBD_IN_PROGRESS);
1087 1.1 maxv
1088 1.1 maxv error = uiomove(buf, size, uio);
1089 1.1 maxv if (error) {
1090 1.1 maxv DPRINTF("%s: error = %d\n", __func__, error);
1091 1.1 maxv goto out;
1092 1.1 maxv }
1093 1.1 maxv
1094 1.1 maxv pkt->cursor += size;
1095 1.1 maxv
1096 1.1 maxv if (pkt->cursor == pkt->size) {
1097 1.1 maxv vhci_pkt_destroy(sc, pkt);
1098 1.9 maxv if (vxfer->npkts == 0) {
1099 1.2 maxv TAILQ_INSERT_TAIL(&vxferlist, vxfer, freelist);
1100 1.1 maxv }
1101 1.1 maxv }
1102 1.1 maxv if (uio->uio_resid == 0) {
1103 1.1 maxv break;
1104 1.1 maxv }
1105 1.1 maxv }
1106 1.1 maxv
1107 1.1 maxv out:
1108 1.1 maxv mutex_exit(&port->lock);
1109 1.1 maxv
1110 1.2 maxv while ((vxfer = TAILQ_FIRST(&vxferlist)) != NULL) {
1111 1.1 maxv struct usbd_xfer *xfer = &vxfer->xfer;
1112 1.2 maxv TAILQ_REMOVE(&vxferlist, vxfer, freelist);
1113 1.1 maxv
1114 1.1 maxv mutex_enter(&sc->sc_lock);
1115 1.1 maxv xfer->ux_actlen = xfer->ux_length;
1116 1.1 maxv xfer->ux_status = USBD_NORMAL_COMPLETION;
1117 1.1 maxv usb_transfer_complete(xfer);
1118 1.1 maxv mutex_exit(&sc->sc_lock);
1119 1.1 maxv }
1120 1.1 maxv
1121 1.1 maxv return error;
1122 1.1 maxv }
1123 1.1 maxv
1124 1.1 maxv static int
1125 1.1 maxv vhci_fd_write(struct file *fp, off_t *offp, struct uio *uio, kauth_cred_t cred,
1126 1.1 maxv int flags)
1127 1.1 maxv {
1128 1.1 maxv vhci_fd_t *vfd = fp->f_data;
1129 1.1 maxv vhci_softc_t *sc = vfd->softc;
1130 1.1 maxv vhci_packet_list_t *pktlist;
1131 1.1 maxv vhci_packet_t *pkt, *nxt;
1132 1.1 maxv vhci_xfer_list_t vxferlist;
1133 1.1 maxv vhci_xfer_t *vxfer;
1134 1.1 maxv vhci_port_t *port;
1135 1.1 maxv int error = 0;
1136 1.1 maxv uint8_t *buf;
1137 1.14 maxv size_t pktsize, size;
1138 1.1 maxv
1139 1.1 maxv if (uio->uio_resid == 0)
1140 1.1 maxv return 0;
1141 1.1 maxv port = &sc->sc_port[vfd->port];
1142 1.10 maxv pktlist = &port->endpoints[vfd->addr].usb_to_host;
1143 1.1 maxv
1144 1.2 maxv TAILQ_INIT(&vxferlist);
1145 1.1 maxv
1146 1.1 maxv mutex_enter(&port->lock);
1147 1.1 maxv
1148 1.1 maxv if (!(port->status & UPS_PORT_ENABLED)) {
1149 1.1 maxv error = ENOBUFS;
1150 1.1 maxv goto out;
1151 1.1 maxv }
1152 1.1 maxv
1153 1.2 maxv TAILQ_FOREACH_SAFE(pkt, pktlist, portlist, nxt) {
1154 1.9 maxv vxfer = pkt->vxfer;
1155 1.1 maxv buf = pkt->buf + pkt->cursor;
1156 1.14 maxv
1157 1.14 maxv pktsize = pkt->size;
1158 1.14 maxv if (pkt->type.dat)
1159 1.14 maxv pktsize = ulmin(vxfer->resbuf.size, pktsize);
1160 1.14 maxv
1161 1.14 maxv KASSERT(pktsize >= pkt->cursor);
1162 1.14 maxv size = uimin(uio->uio_resid, pktsize - pkt->cursor);
1163 1.1 maxv
1164 1.1 maxv KASSERT(vxfer->xfer.ux_status == USBD_IN_PROGRESS);
1165 1.1 maxv
1166 1.1 maxv error = uiomove(buf, size, uio);
1167 1.1 maxv if (error) {
1168 1.1 maxv DPRINTF("%s: error = %d\n", __func__, error);
1169 1.1 maxv goto out;
1170 1.1 maxv }
1171 1.1 maxv
1172 1.1 maxv pkt->cursor += size;
1173 1.1 maxv
1174 1.14 maxv if (pkt->cursor == pktsize) {
1175 1.1 maxv vhci_pkt_destroy(sc, pkt);
1176 1.9 maxv if (vxfer->npkts == 0) {
1177 1.2 maxv TAILQ_INSERT_TAIL(&vxferlist, vxfer, freelist);
1178 1.1 maxv }
1179 1.1 maxv }
1180 1.1 maxv if (uio->uio_resid == 0) {
1181 1.1 maxv break;
1182 1.1 maxv }
1183 1.1 maxv }
1184 1.1 maxv
1185 1.1 maxv out:
1186 1.1 maxv mutex_exit(&port->lock);
1187 1.1 maxv
1188 1.2 maxv while ((vxfer = TAILQ_FIRST(&vxferlist)) != NULL) {
1189 1.1 maxv struct usbd_xfer *xfer = &vxfer->xfer;
1190 1.2 maxv TAILQ_REMOVE(&vxferlist, vxfer, freelist);
1191 1.1 maxv
1192 1.1 maxv mutex_enter(&sc->sc_lock);
1193 1.14 maxv xfer->ux_actlen = ulmin(vxfer->resbuf.size, xfer->ux_length);
1194 1.1 maxv xfer->ux_status = USBD_NORMAL_COMPLETION;
1195 1.1 maxv usb_transfer_complete(xfer);
1196 1.1 maxv mutex_exit(&sc->sc_lock);
1197 1.1 maxv }
1198 1.1 maxv
1199 1.1 maxv return error;
1200 1.1 maxv }
1201 1.1 maxv
1202 1.1 maxv static int
1203 1.1 maxv vhci_fd_ioctl(file_t *fp, u_long cmd, void *data)
1204 1.1 maxv {
1205 1.1 maxv vhci_fd_t *vfd = fp->f_data;
1206 1.1 maxv
1207 1.1 maxv KASSERT(vfd != NULL);
1208 1.1 maxv
1209 1.1 maxv switch (cmd) {
1210 1.1 maxv case VHCI_IOC_GET_INFO:
1211 1.1 maxv return vhci_get_info(vfd, data);
1212 1.1 maxv case VHCI_IOC_SET_PORT:
1213 1.1 maxv return vhci_set_port(vfd, data);
1214 1.10 maxv case VHCI_IOC_SET_ADDR:
1215 1.10 maxv return vhci_set_addr(vfd, data);
1216 1.1 maxv case VHCI_IOC_USB_ATTACH:
1217 1.12 maxv return vhci_usb_attach(vfd);
1218 1.1 maxv case VHCI_IOC_USB_DETACH:
1219 1.12 maxv return vhci_usb_detach(vfd);
1220 1.1 maxv default:
1221 1.1 maxv return EINVAL;
1222 1.1 maxv }
1223 1.1 maxv }
1224 1.1 maxv
1225 1.1 maxv /* -------------------------------------------------------------------------- */
1226 1.1 maxv
1227 1.1 maxv static int vhci_match(device_t, cfdata_t, void *);
1228 1.1 maxv static void vhci_attach(device_t, device_t, void *);
1229 1.3 maxv static int vhci_activate(device_t, enum devact);
1230 1.1 maxv
1231 1.1 maxv CFATTACH_DECL_NEW(vhci, sizeof(vhci_softc_t), vhci_match, vhci_attach,
1232 1.3 maxv NULL, vhci_activate);
1233 1.1 maxv
1234 1.1 maxv void
1235 1.1 maxv vhciattach(int nunits)
1236 1.1 maxv {
1237 1.1 maxv static struct cfdata vhci_cfdata = {
1238 1.1 maxv .cf_name = "vhci",
1239 1.1 maxv .cf_atname = "vhci",
1240 1.1 maxv .cf_unit = 0,
1241 1.1 maxv .cf_fstate = FSTATE_STAR,
1242 1.1 maxv };
1243 1.1 maxv int error;
1244 1.1 maxv
1245 1.1 maxv error = config_cfattach_attach(vhci_cd.cd_name, &vhci_ca);
1246 1.1 maxv if (error) {
1247 1.1 maxv aprint_error("%s: unable to register cfattach\n",
1248 1.1 maxv vhci_cd.cd_name);
1249 1.1 maxv (void)config_cfdriver_detach(&vhci_cd);
1250 1.1 maxv return;
1251 1.1 maxv }
1252 1.1 maxv
1253 1.1 maxv config_attach_pseudo(&vhci_cfdata);
1254 1.1 maxv }
1255 1.1 maxv
1256 1.1 maxv static int
1257 1.3 maxv vhci_activate(device_t self, enum devact act)
1258 1.3 maxv {
1259 1.3 maxv vhci_softc_t *sc = device_private(self);
1260 1.3 maxv
1261 1.3 maxv switch (act) {
1262 1.3 maxv case DVACT_DEACTIVATE:
1263 1.3 maxv sc->sc_dying = 1;
1264 1.3 maxv return 0;
1265 1.3 maxv default:
1266 1.3 maxv return EOPNOTSUPP;
1267 1.3 maxv }
1268 1.3 maxv }
1269 1.3 maxv
1270 1.3 maxv static int
1271 1.1 maxv vhci_match(device_t parent, cfdata_t match, void *aux)
1272 1.1 maxv {
1273 1.1 maxv return 1;
1274 1.1 maxv }
1275 1.1 maxv
1276 1.1 maxv static void
1277 1.1 maxv vhci_attach(device_t parent, device_t self, void *aux)
1278 1.1 maxv {
1279 1.1 maxv vhci_softc_t *sc = device_private(self);
1280 1.1 maxv vhci_port_t *port;
1281 1.10 maxv uint8_t addr;
1282 1.1 maxv size_t i;
1283 1.1 maxv
1284 1.1 maxv sc->sc_dev = self;
1285 1.1 maxv sc->sc_bus.ub_revision = USBREV_2_0;
1286 1.17 maxv sc->sc_bus.ub_hctype = USBHCTYPE_VHCI;
1287 1.1 maxv sc->sc_bus.ub_usedma = false;
1288 1.1 maxv sc->sc_bus.ub_methods = &vhci_bus_methods;
1289 1.1 maxv sc->sc_bus.ub_pipesize = sizeof(vhci_pipe_t);
1290 1.1 maxv sc->sc_bus.ub_hcpriv = sc;
1291 1.1 maxv sc->sc_dying = false;
1292 1.1 maxv mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_SOFTUSB);
1293 1.1 maxv
1294 1.1 maxv sc->sc_nports = VHCI_NPORTS;
1295 1.1 maxv for (i = 0; i < sc->sc_nports; i++) {
1296 1.1 maxv port = &sc->sc_port[i];
1297 1.1 maxv mutex_init(&port->lock, MUTEX_DEFAULT, IPL_SOFTUSB);
1298 1.10 maxv for (addr = 0; addr < VHCI_NADDRS; addr++) {
1299 1.10 maxv TAILQ_INIT(&port->endpoints[addr].usb_to_host);
1300 1.10 maxv TAILQ_INIT(&port->endpoints[addr].host_to_usb);
1301 1.10 maxv }
1302 1.17 maxv kcov_remote_register(KCOV_REMOTE_VHCI, i);
1303 1.1 maxv }
1304 1.1 maxv
1305 1.1 maxv sc->sc_child = config_found(self, &sc->sc_bus, usbctlprint);
1306 1.1 maxv }
1307