xhci.c revision 1.61
1 /* $NetBSD: xhci.c,v 1.61 2016/07/08 05:37:38 skrll Exp $ */ 2 3 /* 4 * Copyright (c) 2013 Jonathan A. Kollasch 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 17 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 18 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 19 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 20 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 21 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 22 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; 23 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 24 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 25 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 26 * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 /* 30 * USB rev 2.0 and rev 3.1 specification 31 * http://www.usb.org/developers/docs/ 32 * xHCI rev 1.1 specification 33 * http://www.intel.com/technology/usb/spec.htm 34 */ 35 36 #include <sys/cdefs.h> 37 __KERNEL_RCSID(0, "$NetBSD: xhci.c,v 1.61 2016/07/08 05:37:38 skrll Exp $"); 38 39 #ifdef _KERNEL_OPT 40 #include "opt_usb.h" 41 #endif 42 43 #include <sys/param.h> 44 #include <sys/systm.h> 45 #include <sys/kernel.h> 46 #include <sys/kmem.h> 47 #include <sys/device.h> 48 #include <sys/select.h> 49 #include <sys/proc.h> 50 #include <sys/queue.h> 51 #include <sys/mutex.h> 52 #include <sys/condvar.h> 53 #include <sys/bus.h> 54 #include <sys/cpu.h> 55 #include <sys/sysctl.h> 56 57 #include <machine/endian.h> 58 59 #include <dev/usb/usb.h> 60 #include <dev/usb/usbdi.h> 61 #include <dev/usb/usbdivar.h> 62 #include <dev/usb/usbdi_util.h> 63 #include <dev/usb/usbhist.h> 64 #include <dev/usb/usb_mem.h> 65 #include <dev/usb/usb_quirks.h> 66 67 #include <dev/usb/xhcireg.h> 68 #include <dev/usb/xhcivar.h> 69 #include <dev/usb/usbroothub.h> 70 71 72 #ifdef USB_DEBUG 73 #ifndef XHCI_DEBUG 74 #define xhcidebug 0 75 #else /* !XHCI_DEBUG */ 76 static int xhcidebug = 0; 77 78 SYSCTL_SETUP(sysctl_hw_xhci_setup, "sysctl hw.xhci setup") 79 { 80 int err; 81 const struct sysctlnode *rnode; 82 const struct sysctlnode *cnode; 83 84 err = sysctl_createv(clog, 0, NULL, &rnode, 85 CTLFLAG_PERMANENT, CTLTYPE_NODE, "xhci", 86 SYSCTL_DESCR("xhci global controls"), 87 NULL, 0, NULL, 0, CTL_HW, CTL_CREATE, CTL_EOL); 88 89 if (err) 90 goto fail; 91 92 /* control debugging printfs */ 93 err = sysctl_createv(clog, 0, &rnode, &cnode, 94 CTLFLAG_PERMANENT|CTLFLAG_READWRITE, CTLTYPE_INT, 95 "debug", SYSCTL_DESCR("Enable debugging output"), 96 NULL, 0, &xhcidebug, sizeof(xhcidebug), CTL_CREATE, CTL_EOL); 97 if (err) 98 goto fail; 99 100 return; 101 fail: 102 aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err); 103 } 104 105 #endif /* !XHCI_DEBUG */ 106 #endif /* USB_DEBUG */ 107 108 #define DPRINTFN(N,FMT,A,B,C,D) USBHIST_LOGN(xhcidebug,N,FMT,A,B,C,D) 109 #define XHCIHIST_FUNC() USBHIST_FUNC() 110 #define XHCIHIST_CALLED(name) USBHIST_CALLED(xhcidebug) 111 112 #define XHCI_DCI_SLOT 0 113 #define XHCI_DCI_EP_CONTROL 1 114 115 #define XHCI_ICI_INPUT_CONTROL 0 116 117 struct xhci_pipe { 118 struct usbd_pipe xp_pipe; 119 struct usb_task xp_async_task; 120 }; 121 122 #define XHCI_COMMAND_RING_TRBS 256 123 #define XHCI_EVENT_RING_TRBS 256 124 #define XHCI_EVENT_RING_SEGMENTS 1 125 #define XHCI_TRB_3_ED_BIT XHCI_TRB_3_ISP_BIT 126 127 static usbd_status xhci_open(struct usbd_pipe *); 128 static void xhci_close_pipe(struct usbd_pipe *); 129 static int xhci_intr1(struct xhci_softc * const); 130 static void xhci_softintr(void *); 131 static void xhci_poll(struct usbd_bus *); 132 static struct usbd_xfer *xhci_allocx(struct usbd_bus *, unsigned int); 133 static void xhci_freex(struct usbd_bus *, struct usbd_xfer *); 134 static void xhci_get_lock(struct usbd_bus *, kmutex_t **); 135 static usbd_status xhci_new_device(device_t, struct usbd_bus *, int, int, int, 136 struct usbd_port *); 137 static int xhci_roothub_ctrl(struct usbd_bus *, usb_device_request_t *, 138 void *, int); 139 140 static usbd_status xhci_configure_endpoint(struct usbd_pipe *); 141 //static usbd_status xhci_unconfigure_endpoint(struct usbd_pipe *); 142 static usbd_status xhci_reset_endpoint(struct usbd_pipe *); 143 static usbd_status xhci_stop_endpoint(struct usbd_pipe *); 144 145 static void xhci_host_dequeue(struct xhci_ring * const); 146 static usbd_status xhci_set_dequeue(struct usbd_pipe *); 147 148 static usbd_status xhci_do_command(struct xhci_softc * const, 149 struct xhci_trb * const, int); 150 static usbd_status xhci_do_command_locked(struct xhci_softc * const, 151 struct xhci_trb * const, int); 152 static usbd_status xhci_init_slot(struct usbd_device *, uint32_t); 153 static void xhci_free_slot(struct xhci_softc *, struct xhci_slot *, int, int); 154 static usbd_status xhci_set_address(struct usbd_device *, uint32_t, bool); 155 static usbd_status xhci_enable_slot(struct xhci_softc * const, 156 uint8_t * const); 157 static usbd_status xhci_disable_slot(struct xhci_softc * const, uint8_t); 158 static usbd_status xhci_address_device(struct xhci_softc * const, 159 uint64_t, uint8_t, bool); 160 static void xhci_set_dcba(struct xhci_softc * const, uint64_t, int); 161 static usbd_status xhci_update_ep0_mps(struct xhci_softc * const, 162 struct xhci_slot * const, u_int); 163 static usbd_status xhci_ring_init(struct xhci_softc * const, 164 struct xhci_ring * const, size_t, size_t); 165 static void xhci_ring_free(struct xhci_softc * const, struct xhci_ring * const); 166 167 static void xhci_setup_ctx(struct usbd_pipe *); 168 static void xhci_setup_route(struct usbd_pipe *, uint32_t *); 169 static void xhci_setup_tthub(struct usbd_pipe *, uint32_t *); 170 static void xhci_setup_maxburst(struct usbd_pipe *, uint32_t *); 171 static uint32_t xhci_bival2ival(uint32_t, uint32_t); 172 173 static void xhci_noop(struct usbd_pipe *); 174 175 static usbd_status xhci_root_intr_transfer(struct usbd_xfer *); 176 static usbd_status xhci_root_intr_start(struct usbd_xfer *); 177 static void xhci_root_intr_abort(struct usbd_xfer *); 178 static void xhci_root_intr_close(struct usbd_pipe *); 179 static void xhci_root_intr_done(struct usbd_xfer *); 180 181 static usbd_status xhci_device_ctrl_transfer(struct usbd_xfer *); 182 static usbd_status xhci_device_ctrl_start(struct usbd_xfer *); 183 static void xhci_device_ctrl_abort(struct usbd_xfer *); 184 static void xhci_device_ctrl_close(struct usbd_pipe *); 185 static void xhci_device_ctrl_done(struct usbd_xfer *); 186 187 static usbd_status xhci_device_intr_transfer(struct usbd_xfer *); 188 static usbd_status xhci_device_intr_start(struct usbd_xfer *); 189 static void xhci_device_intr_abort(struct usbd_xfer *); 190 static void xhci_device_intr_close(struct usbd_pipe *); 191 static void xhci_device_intr_done(struct usbd_xfer *); 192 193 static usbd_status xhci_device_bulk_transfer(struct usbd_xfer *); 194 static usbd_status xhci_device_bulk_start(struct usbd_xfer *); 195 static void xhci_device_bulk_abort(struct usbd_xfer *); 196 static void xhci_device_bulk_close(struct usbd_pipe *); 197 static void xhci_device_bulk_done(struct usbd_xfer *); 198 199 static void xhci_timeout(void *); 200 static void xhci_timeout_task(void *); 201 202 static const struct usbd_bus_methods xhci_bus_methods = { 203 .ubm_open = xhci_open, 204 .ubm_softint = xhci_softintr, 205 .ubm_dopoll = xhci_poll, 206 .ubm_allocx = xhci_allocx, 207 .ubm_freex = xhci_freex, 208 .ubm_getlock = xhci_get_lock, 209 .ubm_newdev = xhci_new_device, 210 .ubm_rhctrl = xhci_roothub_ctrl, 211 }; 212 213 static const struct usbd_pipe_methods xhci_root_intr_methods = { 214 .upm_transfer = xhci_root_intr_transfer, 215 .upm_start = xhci_root_intr_start, 216 .upm_abort = xhci_root_intr_abort, 217 .upm_close = xhci_root_intr_close, 218 .upm_cleartoggle = xhci_noop, 219 .upm_done = xhci_root_intr_done, 220 }; 221 222 223 static const struct usbd_pipe_methods xhci_device_ctrl_methods = { 224 .upm_transfer = xhci_device_ctrl_transfer, 225 .upm_start = xhci_device_ctrl_start, 226 .upm_abort = xhci_device_ctrl_abort, 227 .upm_close = xhci_device_ctrl_close, 228 .upm_cleartoggle = xhci_noop, 229 .upm_done = xhci_device_ctrl_done, 230 }; 231 232 static const struct usbd_pipe_methods xhci_device_isoc_methods = { 233 .upm_cleartoggle = xhci_noop, 234 }; 235 236 static const struct usbd_pipe_methods xhci_device_bulk_methods = { 237 .upm_transfer = xhci_device_bulk_transfer, 238 .upm_start = xhci_device_bulk_start, 239 .upm_abort = xhci_device_bulk_abort, 240 .upm_close = xhci_device_bulk_close, 241 .upm_cleartoggle = xhci_noop, 242 .upm_done = xhci_device_bulk_done, 243 }; 244 245 static const struct usbd_pipe_methods xhci_device_intr_methods = { 246 .upm_transfer = xhci_device_intr_transfer, 247 .upm_start = xhci_device_intr_start, 248 .upm_abort = xhci_device_intr_abort, 249 .upm_close = xhci_device_intr_close, 250 .upm_cleartoggle = xhci_noop, 251 .upm_done = xhci_device_intr_done, 252 }; 253 254 static inline uint32_t 255 xhci_read_1(const struct xhci_softc * const sc, bus_size_t offset) 256 { 257 return bus_space_read_1(sc->sc_iot, sc->sc_ioh, offset); 258 } 259 260 static inline uint32_t 261 xhci_read_4(const struct xhci_softc * const sc, bus_size_t offset) 262 { 263 return bus_space_read_4(sc->sc_iot, sc->sc_ioh, offset); 264 } 265 266 static inline void 267 xhci_write_1(const struct xhci_softc * const sc, bus_size_t offset, 268 uint32_t value) 269 { 270 bus_space_write_1(sc->sc_iot, sc->sc_ioh, offset, value); 271 } 272 273 #if 0 /* unused */ 274 static inline void 275 xhci_write_4(const struct xhci_softc * const sc, bus_size_t offset, 276 uint32_t value) 277 { 278 bus_space_write_4(sc->sc_iot, sc->sc_ioh, offset, value); 279 } 280 #endif /* unused */ 281 282 static inline uint32_t 283 xhci_cap_read_4(const struct xhci_softc * const sc, bus_size_t offset) 284 { 285 return bus_space_read_4(sc->sc_iot, sc->sc_cbh, offset); 286 } 287 288 static inline uint32_t 289 xhci_op_read_4(const struct xhci_softc * const sc, bus_size_t offset) 290 { 291 return bus_space_read_4(sc->sc_iot, sc->sc_obh, offset); 292 } 293 294 static inline void 295 xhci_op_write_4(const struct xhci_softc * const sc, bus_size_t offset, 296 uint32_t value) 297 { 298 bus_space_write_4(sc->sc_iot, sc->sc_obh, offset, value); 299 } 300 301 static inline uint64_t 302 xhci_op_read_8(const struct xhci_softc * const sc, bus_size_t offset) 303 { 304 uint64_t value; 305 306 if (sc->sc_ac64) { 307 #ifdef XHCI_USE_BUS_SPACE_8 308 value = bus_space_read_8(sc->sc_iot, sc->sc_obh, offset); 309 #else 310 value = bus_space_read_4(sc->sc_iot, sc->sc_obh, offset); 311 value |= (uint64_t)bus_space_read_4(sc->sc_iot, sc->sc_obh, 312 offset + 4) << 32; 313 #endif 314 } else { 315 value = bus_space_read_4(sc->sc_iot, sc->sc_obh, offset); 316 } 317 318 return value; 319 } 320 321 static inline void 322 xhci_op_write_8(const struct xhci_softc * const sc, bus_size_t offset, 323 uint64_t value) 324 { 325 if (sc->sc_ac64) { 326 #ifdef XHCI_USE_BUS_SPACE_8 327 bus_space_write_8(sc->sc_iot, sc->sc_obh, offset, value); 328 #else 329 bus_space_write_4(sc->sc_iot, sc->sc_obh, offset + 0, 330 (value >> 0) & 0xffffffff); 331 bus_space_write_4(sc->sc_iot, sc->sc_obh, offset + 4, 332 (value >> 32) & 0xffffffff); 333 #endif 334 } else { 335 bus_space_write_4(sc->sc_iot, sc->sc_obh, offset, value); 336 } 337 } 338 339 static inline uint32_t 340 xhci_rt_read_4(const struct xhci_softc * const sc, bus_size_t offset) 341 { 342 return bus_space_read_4(sc->sc_iot, sc->sc_rbh, offset); 343 } 344 345 static inline void 346 xhci_rt_write_4(const struct xhci_softc * const sc, bus_size_t offset, 347 uint32_t value) 348 { 349 bus_space_write_4(sc->sc_iot, sc->sc_rbh, offset, value); 350 } 351 352 #if 0 /* unused */ 353 static inline uint64_t 354 xhci_rt_read_8(const struct xhci_softc * const sc, bus_size_t offset) 355 { 356 uint64_t value; 357 358 if (sc->sc_ac64) { 359 #ifdef XHCI_USE_BUS_SPACE_8 360 value = bus_space_read_8(sc->sc_iot, sc->sc_rbh, offset); 361 #else 362 value = bus_space_read_4(sc->sc_iot, sc->sc_rbh, offset); 363 value |= (uint64_t)bus_space_read_4(sc->sc_iot, sc->sc_rbh, 364 offset + 4) << 32; 365 #endif 366 } else { 367 value = bus_space_read_4(sc->sc_iot, sc->sc_rbh, offset); 368 } 369 370 return value; 371 } 372 #endif /* unused */ 373 374 static inline void 375 xhci_rt_write_8(const struct xhci_softc * const sc, bus_size_t offset, 376 uint64_t value) 377 { 378 if (sc->sc_ac64) { 379 #ifdef XHCI_USE_BUS_SPACE_8 380 bus_space_write_8(sc->sc_iot, sc->sc_rbh, offset, value); 381 #else 382 bus_space_write_4(sc->sc_iot, sc->sc_rbh, offset + 0, 383 (value >> 0) & 0xffffffff); 384 bus_space_write_4(sc->sc_iot, sc->sc_rbh, offset + 4, 385 (value >> 32) & 0xffffffff); 386 #endif 387 } else { 388 bus_space_write_4(sc->sc_iot, sc->sc_rbh, offset, value); 389 } 390 } 391 392 #if 0 /* unused */ 393 static inline uint32_t 394 xhci_db_read_4(const struct xhci_softc * const sc, bus_size_t offset) 395 { 396 return bus_space_read_4(sc->sc_iot, sc->sc_dbh, offset); 397 } 398 #endif /* unused */ 399 400 static inline void 401 xhci_db_write_4(const struct xhci_softc * const sc, bus_size_t offset, 402 uint32_t value) 403 { 404 bus_space_write_4(sc->sc_iot, sc->sc_dbh, offset, value); 405 } 406 407 /* --- */ 408 409 static inline uint8_t 410 xhci_ep_get_type(usb_endpoint_descriptor_t * const ed) 411 { 412 u_int eptype = 0; 413 414 switch (UE_GET_XFERTYPE(ed->bmAttributes)) { 415 case UE_CONTROL: 416 eptype = 0x0; 417 break; 418 case UE_ISOCHRONOUS: 419 eptype = 0x1; 420 break; 421 case UE_BULK: 422 eptype = 0x2; 423 break; 424 case UE_INTERRUPT: 425 eptype = 0x3; 426 break; 427 } 428 429 if ((UE_GET_XFERTYPE(ed->bmAttributes) == UE_CONTROL) || 430 (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN)) 431 return eptype | 0x4; 432 else 433 return eptype; 434 } 435 436 static u_int 437 xhci_ep_get_dci(usb_endpoint_descriptor_t * const ed) 438 { 439 /* xHCI 1.0 section 4.5.1 */ 440 u_int epaddr = UE_GET_ADDR(ed->bEndpointAddress); 441 u_int in = 0; 442 443 if ((UE_GET_XFERTYPE(ed->bmAttributes) == UE_CONTROL) || 444 (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN)) 445 in = 1; 446 447 return epaddr * 2 + in; 448 } 449 450 static inline u_int 451 xhci_dci_to_ici(const u_int i) 452 { 453 return i + 1; 454 } 455 456 static inline void * 457 xhci_slot_get_dcv(struct xhci_softc * const sc, struct xhci_slot * const xs, 458 const u_int dci) 459 { 460 return KERNADDR(&xs->xs_dc_dma, sc->sc_ctxsz * dci); 461 } 462 463 #if 0 /* unused */ 464 static inline bus_addr_t 465 xhci_slot_get_dcp(struct xhci_softc * const sc, struct xhci_slot * const xs, 466 const u_int dci) 467 { 468 return DMAADDR(&xs->xs_dc_dma, sc->sc_ctxsz * dci); 469 } 470 #endif /* unused */ 471 472 static inline void * 473 xhci_slot_get_icv(struct xhci_softc * const sc, struct xhci_slot * const xs, 474 const u_int ici) 475 { 476 return KERNADDR(&xs->xs_ic_dma, sc->sc_ctxsz * ici); 477 } 478 479 static inline bus_addr_t 480 xhci_slot_get_icp(struct xhci_softc * const sc, struct xhci_slot * const xs, 481 const u_int ici) 482 { 483 return DMAADDR(&xs->xs_ic_dma, sc->sc_ctxsz * ici); 484 } 485 486 static inline struct xhci_trb * 487 xhci_ring_trbv(struct xhci_ring * const xr, u_int idx) 488 { 489 return KERNADDR(&xr->xr_dma, XHCI_TRB_SIZE * idx); 490 } 491 492 static inline bus_addr_t 493 xhci_ring_trbp(struct xhci_ring * const xr, u_int idx) 494 { 495 return DMAADDR(&xr->xr_dma, XHCI_TRB_SIZE * idx); 496 } 497 498 static inline void 499 xhci_trb_put(struct xhci_trb * const trb, uint64_t parameter, uint32_t status, 500 uint32_t control) 501 { 502 trb->trb_0 = htole64(parameter); 503 trb->trb_2 = htole32(status); 504 trb->trb_3 = htole32(control); 505 } 506 507 static int 508 xhci_trb_get_idx(struct xhci_ring *xr, uint64_t trb_0, int *idx) 509 { 510 /* base address of TRBs */ 511 bus_addr_t trbp = xhci_ring_trbp(xr, 0); 512 513 /* trb_0 range sanity check */ 514 if (trb_0 == 0 || trb_0 < trbp || 515 (trb_0 - trbp) % sizeof(struct xhci_trb) != 0 || 516 (trb_0 - trbp) / sizeof(struct xhci_trb) >= xr->xr_ntrb) { 517 return 1; 518 } 519 *idx = (trb_0 - trbp) / sizeof(struct xhci_trb); 520 return 0; 521 } 522 523 /* --- */ 524 525 void 526 xhci_childdet(device_t self, device_t child) 527 { 528 struct xhci_softc * const sc = device_private(self); 529 530 KASSERT(sc->sc_child == child); 531 if (child == sc->sc_child) 532 sc->sc_child = NULL; 533 } 534 535 int 536 xhci_detach(struct xhci_softc *sc, int flags) 537 { 538 int rv = 0; 539 540 if (sc->sc_child != NULL) 541 rv = config_detach(sc->sc_child, flags); 542 543 if (rv != 0) 544 return rv; 545 546 /* XXX unconfigure/free slots */ 547 548 /* verify: */ 549 xhci_rt_write_4(sc, XHCI_IMAN(0), 0); 550 xhci_op_write_4(sc, XHCI_USBCMD, 0); 551 /* do we need to wait for stop? */ 552 553 xhci_op_write_8(sc, XHCI_CRCR, 0); 554 xhci_ring_free(sc, &sc->sc_cr); 555 cv_destroy(&sc->sc_command_cv); 556 557 xhci_rt_write_4(sc, XHCI_ERSTSZ(0), 0); 558 xhci_rt_write_8(sc, XHCI_ERSTBA(0), 0); 559 xhci_rt_write_8(sc, XHCI_ERDP(0), 0|XHCI_ERDP_LO_BUSY); 560 xhci_ring_free(sc, &sc->sc_er); 561 562 usb_freemem(&sc->sc_bus, &sc->sc_eventst_dma); 563 564 xhci_op_write_8(sc, XHCI_DCBAAP, 0); 565 usb_freemem(&sc->sc_bus, &sc->sc_dcbaa_dma); 566 567 kmem_free(sc->sc_slots, sizeof(*sc->sc_slots) * sc->sc_maxslots); 568 569 mutex_destroy(&sc->sc_lock); 570 mutex_destroy(&sc->sc_intr_lock); 571 572 pool_cache_destroy(sc->sc_xferpool); 573 574 return rv; 575 } 576 577 int 578 xhci_activate(device_t self, enum devact act) 579 { 580 struct xhci_softc * const sc = device_private(self); 581 582 switch (act) { 583 case DVACT_DEACTIVATE: 584 sc->sc_dying = true; 585 return 0; 586 default: 587 return EOPNOTSUPP; 588 } 589 } 590 591 bool 592 xhci_suspend(device_t dv, const pmf_qual_t *qual) 593 { 594 return false; 595 } 596 597 bool 598 xhci_resume(device_t dv, const pmf_qual_t *qual) 599 { 600 return false; 601 } 602 603 bool 604 xhci_shutdown(device_t self, int flags) 605 { 606 return false; 607 } 608 609 static int 610 xhci_hc_reset(struct xhci_softc * const sc) 611 { 612 uint32_t usbcmd, usbsts; 613 int i; 614 615 /* Check controller not ready */ 616 for (i = 0; i < XHCI_WAIT_CNR; i++) { 617 usbsts = xhci_op_read_4(sc, XHCI_USBSTS); 618 if ((usbsts & XHCI_STS_CNR) == 0) 619 break; 620 usb_delay_ms(&sc->sc_bus, 1); 621 } 622 if (i >= XHCI_WAIT_CNR) { 623 aprint_error_dev(sc->sc_dev, "controller not ready timeout\n"); 624 return EIO; 625 } 626 627 /* Halt controller */ 628 usbcmd = 0; 629 xhci_op_write_4(sc, XHCI_USBCMD, usbcmd); 630 usb_delay_ms(&sc->sc_bus, 1); 631 632 /* Reset controller */ 633 usbcmd = XHCI_CMD_HCRST; 634 xhci_op_write_4(sc, XHCI_USBCMD, usbcmd); 635 for (i = 0; i < XHCI_WAIT_HCRST; i++) { 636 usbcmd = xhci_op_read_4(sc, XHCI_USBCMD); 637 if ((usbcmd & XHCI_CMD_HCRST) == 0) 638 break; 639 usb_delay_ms(&sc->sc_bus, 1); 640 } 641 if (i >= XHCI_WAIT_HCRST) { 642 aprint_error_dev(sc->sc_dev, "host controller reset timeout\n"); 643 return EIO; 644 } 645 646 /* Check controller not ready */ 647 for (i = 0; i < XHCI_WAIT_CNR; i++) { 648 usbsts = xhci_op_read_4(sc, XHCI_USBSTS); 649 if ((usbsts & XHCI_STS_CNR) == 0) 650 break; 651 usb_delay_ms(&sc->sc_bus, 1); 652 } 653 if (i >= XHCI_WAIT_CNR) { 654 aprint_error_dev(sc->sc_dev, 655 "controller not ready timeout after reset\n"); 656 return EIO; 657 } 658 659 return 0; 660 } 661 662 663 static void 664 hexdump(const char *msg, const void *base, size_t len) 665 { 666 #if 0 667 size_t cnt; 668 const uint32_t *p; 669 extern paddr_t vtophys(vaddr_t); 670 671 p = base; 672 cnt = 0; 673 674 printf("*** %s (%zu bytes @ %p %p)\n", msg, len, base, 675 (void *)vtophys((vaddr_t)base)); 676 677 while (cnt < len) { 678 if (cnt % 16 == 0) 679 printf("%p: ", p); 680 else if (cnt % 8 == 0) 681 printf(" |"); 682 printf(" %08x", *p++); 683 cnt += 4; 684 if (cnt % 16 == 0) 685 printf("\n"); 686 } 687 if (cnt % 16 != 0) 688 printf("\n"); 689 #endif 690 } 691 692 /* Process extended capabilities */ 693 static void 694 xhci_ecp(struct xhci_softc *sc, uint32_t hcc) 695 { 696 uint32_t ecp, ecr; 697 698 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 699 700 ecp = XHCI_HCC_XECP(hcc) * 4; 701 while (ecp != 0) { 702 ecr = xhci_read_4(sc, ecp); 703 aprint_debug_dev(sc->sc_dev, "ECR %x: %08x\n", ecp, ecr); 704 switch (XHCI_XECP_ID(ecr)) { 705 case XHCI_ID_PROTOCOLS: { 706 uint32_t w4, w8, wc; 707 uint16_t w2; 708 w2 = (ecr >> 16) & 0xffff; 709 w4 = xhci_read_4(sc, ecp + 4); 710 w8 = xhci_read_4(sc, ecp + 8); 711 wc = xhci_read_4(sc, ecp + 0xc); 712 aprint_debug_dev(sc->sc_dev, 713 " SP: %08x %08x %08x %08x\n", ecr, w4, w8, wc); 714 /* unused */ 715 if (w4 == 0x20425355 && (w2 & 0xff00) == 0x0300) { 716 sc->sc_ss_port_start = (w8 >> 0) & 0xff;; 717 sc->sc_ss_port_count = (w8 >> 8) & 0xff;; 718 } 719 if (w4 == 0x20425355 && (w2 & 0xff00) == 0x0200) { 720 sc->sc_hs_port_start = (w8 >> 0) & 0xff; 721 sc->sc_hs_port_count = (w8 >> 8) & 0xff; 722 } 723 break; 724 } 725 case XHCI_ID_USB_LEGACY: { 726 uint8_t bios_sem; 727 728 /* Take host controller ownership from BIOS */ 729 bios_sem = xhci_read_1(sc, ecp + XHCI_XECP_BIOS_SEM); 730 if (bios_sem) { 731 /* sets xHCI to be owned by OS */ 732 xhci_write_1(sc, ecp + XHCI_XECP_OS_SEM, 1); 733 aprint_debug_dev(sc->sc_dev, 734 "waiting for BIOS to give up control\n"); 735 for (int i = 0; i < 5000; i++) { 736 bios_sem = xhci_read_1(sc, ecp + 737 XHCI_XECP_BIOS_SEM); 738 if (bios_sem == 0) 739 break; 740 DELAY(1000); 741 } 742 if (bios_sem) { 743 aprint_error_dev(sc->sc_dev, 744 "timed out waiting for BIOS\n"); 745 } 746 } 747 break; 748 } 749 default: 750 break; 751 } 752 ecr = xhci_read_4(sc, ecp); 753 if (XHCI_XECP_NEXT(ecr) == 0) { 754 ecp = 0; 755 } else { 756 ecp += XHCI_XECP_NEXT(ecr) * 4; 757 } 758 } 759 } 760 761 #define XHCI_HCCPREV1_BITS \ 762 "\177\020" /* New bitmask */ \ 763 "f\020\020XECP\0" \ 764 "f\014\4MAXPSA\0" \ 765 "b\013CFC\0" \ 766 "b\012SEC\0" \ 767 "b\011SBD\0" \ 768 "b\010FSE\0" \ 769 "b\7NSS\0" \ 770 "b\6LTC\0" \ 771 "b\5LHRC\0" \ 772 "b\4PIND\0" \ 773 "b\3PPC\0" \ 774 "b\2CZC\0" \ 775 "b\1BNC\0" \ 776 "b\0AC64\0" \ 777 "\0" 778 #define XHCI_HCCV1_x_BITS \ 779 "\177\020" /* New bitmask */ \ 780 "f\020\020XECP\0" \ 781 "f\014\4MAXPSA\0" \ 782 "b\013CFC\0" \ 783 "b\012SEC\0" \ 784 "b\011SPC\0" \ 785 "b\010PAE\0" \ 786 "b\7NSS\0" \ 787 "b\6LTC\0" \ 788 "b\5LHRC\0" \ 789 "b\4PIND\0" \ 790 "b\3PPC\0" \ 791 "b\2CSZ\0" \ 792 "b\1BNC\0" \ 793 "b\0AC64\0" \ 794 "\0" 795 796 int 797 xhci_init(struct xhci_softc *sc) 798 { 799 bus_size_t bsz; 800 uint32_t cap, hcs1, hcs2, hcs3, hcc, dboff, rtsoff; 801 uint32_t pagesize, config; 802 int i = 0; 803 uint16_t hciversion; 804 uint8_t caplength; 805 806 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 807 808 sc->sc_bus.ub_revision = USBREV_3_0; 809 sc->sc_bus.ub_usedma = true; 810 811 cap = xhci_read_4(sc, XHCI_CAPLENGTH); 812 caplength = XHCI_CAP_CAPLENGTH(cap); 813 hciversion = XHCI_CAP_HCIVERSION(cap); 814 815 if (hciversion < XHCI_HCIVERSION_0_96 || 816 hciversion > XHCI_HCIVERSION_1_0) { 817 aprint_normal_dev(sc->sc_dev, 818 "xHCI version %x.%x not known to be supported\n", 819 (hciversion >> 8) & 0xff, (hciversion >> 0) & 0xff); 820 } else { 821 aprint_verbose_dev(sc->sc_dev, "xHCI version %x.%x\n", 822 (hciversion >> 8) & 0xff, (hciversion >> 0) & 0xff); 823 } 824 825 if (bus_space_subregion(sc->sc_iot, sc->sc_ioh, 0, caplength, 826 &sc->sc_cbh) != 0) { 827 aprint_error_dev(sc->sc_dev, "capability subregion failure\n"); 828 return ENOMEM; 829 } 830 831 hcs1 = xhci_cap_read_4(sc, XHCI_HCSPARAMS1); 832 sc->sc_maxslots = XHCI_HCS1_MAXSLOTS(hcs1); 833 sc->sc_maxintrs = XHCI_HCS1_MAXINTRS(hcs1); 834 sc->sc_maxports = XHCI_HCS1_MAXPORTS(hcs1); 835 hcs2 = xhci_cap_read_4(sc, XHCI_HCSPARAMS2); 836 hcs3 = xhci_cap_read_4(sc, XHCI_HCSPARAMS3); 837 aprint_debug_dev(sc->sc_dev, 838 "hcs1=%"PRIx32" hcs2=%"PRIx32" hcs3=%"PRIx32"\n", hcs1, hcs2, hcs3); 839 840 hcc = xhci_cap_read_4(sc, XHCI_HCCPARAMS); 841 sc->sc_ac64 = XHCI_HCC_AC64(hcc); 842 sc->sc_ctxsz = XHCI_HCC_CSZ(hcc) ? 64 : 32; 843 844 char sbuf[128]; 845 if (hciversion < XHCI_HCIVERSION_1_0) 846 snprintb(sbuf, sizeof(sbuf), XHCI_HCCPREV1_BITS, hcc); 847 else 848 snprintb(sbuf, sizeof(sbuf), XHCI_HCCV1_x_BITS, hcc); 849 aprint_debug_dev(sc->sc_dev, "hcc=%s\n", sbuf); 850 aprint_debug_dev(sc->sc_dev, "xECP %x\n", XHCI_HCC_XECP(hcc) * 4); 851 852 /* print PSI and take ownership from BIOS */ 853 xhci_ecp(sc, hcc); 854 855 bsz = XHCI_PORTSC(sc->sc_maxports + 1); 856 if (bus_space_subregion(sc->sc_iot, sc->sc_ioh, caplength, bsz, 857 &sc->sc_obh) != 0) { 858 aprint_error_dev(sc->sc_dev, "operational subregion failure\n"); 859 return ENOMEM; 860 } 861 862 dboff = xhci_cap_read_4(sc, XHCI_DBOFF); 863 if (bus_space_subregion(sc->sc_iot, sc->sc_ioh, dboff, 864 sc->sc_maxslots * 4, &sc->sc_dbh) != 0) { 865 aprint_error_dev(sc->sc_dev, "doorbell subregion failure\n"); 866 return ENOMEM; 867 } 868 869 rtsoff = xhci_cap_read_4(sc, XHCI_RTSOFF); 870 if (bus_space_subregion(sc->sc_iot, sc->sc_ioh, rtsoff, 871 sc->sc_maxintrs * 0x20, &sc->sc_rbh) != 0) { 872 aprint_error_dev(sc->sc_dev, "runtime subregion failure\n"); 873 return ENOMEM; 874 } 875 876 int rv; 877 rv = xhci_hc_reset(sc); 878 if (rv != 0) { 879 return rv; 880 } 881 882 if (sc->sc_vendor_init) 883 sc->sc_vendor_init(sc); 884 885 pagesize = xhci_op_read_4(sc, XHCI_PAGESIZE); 886 aprint_debug_dev(sc->sc_dev, "PAGESIZE 0x%08x\n", pagesize); 887 pagesize = ffs(pagesize); 888 if (pagesize == 0) { 889 aprint_error_dev(sc->sc_dev, "pagesize is 0\n"); 890 return EIO; 891 } 892 sc->sc_pgsz = 1 << (12 + (pagesize - 1)); 893 aprint_debug_dev(sc->sc_dev, "sc_pgsz 0x%08x\n", (uint32_t)sc->sc_pgsz); 894 aprint_debug_dev(sc->sc_dev, "sc_maxslots 0x%08x\n", 895 (uint32_t)sc->sc_maxslots); 896 aprint_debug_dev(sc->sc_dev, "sc_maxports %d\n", sc->sc_maxports); 897 898 usbd_status err; 899 900 sc->sc_maxspbuf = XHCI_HCS2_MAXSPBUF(hcs2); 901 aprint_debug_dev(sc->sc_dev, "sc_maxspbuf %d\n", sc->sc_maxspbuf); 902 if (sc->sc_maxspbuf != 0) { 903 err = usb_allocmem(&sc->sc_bus, 904 sizeof(uint64_t) * sc->sc_maxspbuf, sizeof(uint64_t), 905 &sc->sc_spbufarray_dma); 906 if (err) { 907 aprint_error_dev(sc->sc_dev, 908 "spbufarray init fail, err %d\n", err); 909 return ENOMEM; 910 } 911 912 sc->sc_spbuf_dma = kmem_zalloc(sizeof(*sc->sc_spbuf_dma) * 913 sc->sc_maxspbuf, KM_SLEEP); 914 uint64_t *spbufarray = KERNADDR(&sc->sc_spbufarray_dma, 0); 915 for (i = 0; i < sc->sc_maxspbuf; i++) { 916 usb_dma_t * const dma = &sc->sc_spbuf_dma[i]; 917 /* allocate contexts */ 918 err = usb_allocmem(&sc->sc_bus, sc->sc_pgsz, 919 sc->sc_pgsz, dma); 920 if (err) { 921 aprint_error_dev(sc->sc_dev, 922 "spbufarray_dma init fail, err %d\n", err); 923 rv = ENOMEM; 924 goto bad1; 925 } 926 spbufarray[i] = htole64(DMAADDR(dma, 0)); 927 usb_syncmem(dma, 0, sc->sc_pgsz, 928 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 929 } 930 931 usb_syncmem(&sc->sc_spbufarray_dma, 0, 932 sizeof(uint64_t) * sc->sc_maxspbuf, BUS_DMASYNC_PREWRITE); 933 } 934 935 config = xhci_op_read_4(sc, XHCI_CONFIG); 936 config &= ~0xFF; 937 config |= sc->sc_maxslots & 0xFF; 938 xhci_op_write_4(sc, XHCI_CONFIG, config); 939 940 err = xhci_ring_init(sc, &sc->sc_cr, XHCI_COMMAND_RING_TRBS, 941 XHCI_COMMAND_RING_SEGMENTS_ALIGN); 942 if (err) { 943 aprint_error_dev(sc->sc_dev, "command ring init fail, err %d\n", 944 err); 945 rv = ENOMEM; 946 goto bad1; 947 } 948 949 err = xhci_ring_init(sc, &sc->sc_er, XHCI_EVENT_RING_TRBS, 950 XHCI_EVENT_RING_SEGMENTS_ALIGN); 951 if (err) { 952 aprint_error_dev(sc->sc_dev, "event ring init fail, err %d\n", 953 err); 954 rv = ENOMEM; 955 goto bad2; 956 } 957 958 usb_dma_t *dma; 959 size_t size; 960 size_t align; 961 962 dma = &sc->sc_eventst_dma; 963 size = roundup2(XHCI_EVENT_RING_SEGMENTS * XHCI_ERSTE_SIZE, 964 XHCI_EVENT_RING_SEGMENT_TABLE_ALIGN); 965 KASSERTMSG(size <= (512 * 1024), "eventst size %zu too large", size); 966 align = XHCI_EVENT_RING_SEGMENT_TABLE_ALIGN; 967 err = usb_allocmem(&sc->sc_bus, size, align, dma); 968 if (err) { 969 aprint_error_dev(sc->sc_dev, "eventst init fail, err %d\n", 970 err); 971 rv = ENOMEM; 972 goto bad3; 973 } 974 975 memset(KERNADDR(dma, 0), 0, size); 976 usb_syncmem(dma, 0, size, BUS_DMASYNC_PREWRITE); 977 aprint_debug_dev(sc->sc_dev, "eventst: %016jx %p %zx\n", 978 (uintmax_t)DMAADDR(&sc->sc_eventst_dma, 0), 979 KERNADDR(&sc->sc_eventst_dma, 0), 980 sc->sc_eventst_dma.udma_block->size); 981 982 dma = &sc->sc_dcbaa_dma; 983 size = (1 + sc->sc_maxslots) * sizeof(uint64_t); 984 KASSERTMSG(size <= 2048, "dcbaa size %zu too large", size); 985 align = XHCI_DEVICE_CONTEXT_BASE_ADDRESS_ARRAY_ALIGN; 986 err = usb_allocmem(&sc->sc_bus, size, align, dma); 987 if (err) { 988 aprint_error_dev(sc->sc_dev, "dcbaa init fail, err %d\n", err); 989 rv = ENOMEM; 990 goto bad4; 991 } 992 aprint_debug_dev(sc->sc_dev, "dcbaa: %016jx %p %zx\n", 993 (uintmax_t)DMAADDR(&sc->sc_dcbaa_dma, 0), 994 KERNADDR(&sc->sc_dcbaa_dma, 0), 995 sc->sc_dcbaa_dma.udma_block->size); 996 997 memset(KERNADDR(dma, 0), 0, size); 998 if (sc->sc_maxspbuf != 0) { 999 /* 1000 * DCBA entry 0 hold the scratchbuf array pointer. 1001 */ 1002 *(uint64_t *)KERNADDR(dma, 0) = 1003 htole64(DMAADDR(&sc->sc_spbufarray_dma, 0)); 1004 } 1005 usb_syncmem(dma, 0, size, BUS_DMASYNC_PREWRITE); 1006 1007 sc->sc_slots = kmem_zalloc(sizeof(*sc->sc_slots) * sc->sc_maxslots, 1008 KM_SLEEP); 1009 if (sc->sc_slots == NULL) { 1010 aprint_error_dev(sc->sc_dev, "slots init fail, err %d\n", err); 1011 rv = ENOMEM; 1012 goto bad; 1013 } 1014 1015 sc->sc_xferpool = pool_cache_init(sizeof(struct xhci_xfer), 0, 0, 0, 1016 "xhcixfer", NULL, IPL_USB, NULL, NULL, NULL); 1017 if (sc->sc_xferpool == NULL) { 1018 aprint_error_dev(sc->sc_dev, "pool_cache init fail, err %d\n", 1019 err); 1020 rv = ENOMEM; 1021 goto bad; 1022 } 1023 1024 cv_init(&sc->sc_command_cv, "xhcicmd"); 1025 mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_SOFTUSB); 1026 mutex_init(&sc->sc_intr_lock, MUTEX_DEFAULT, IPL_USB); 1027 1028 /* Set up the bus struct. */ 1029 sc->sc_bus.ub_methods = &xhci_bus_methods; 1030 sc->sc_bus.ub_pipesize = sizeof(struct xhci_pipe); 1031 1032 struct xhci_erste *erst; 1033 erst = KERNADDR(&sc->sc_eventst_dma, 0); 1034 erst[0].erste_0 = htole64(xhci_ring_trbp(&sc->sc_er, 0)); 1035 erst[0].erste_2 = htole32(sc->sc_er.xr_ntrb); 1036 erst[0].erste_3 = htole32(0); 1037 usb_syncmem(&sc->sc_eventst_dma, 0, 1038 XHCI_ERSTE_SIZE * XHCI_EVENT_RING_SEGMENTS, BUS_DMASYNC_PREWRITE); 1039 1040 xhci_rt_write_4(sc, XHCI_ERSTSZ(0), XHCI_EVENT_RING_SEGMENTS); 1041 xhci_rt_write_8(sc, XHCI_ERSTBA(0), DMAADDR(&sc->sc_eventst_dma, 0)); 1042 xhci_rt_write_8(sc, XHCI_ERDP(0), xhci_ring_trbp(&sc->sc_er, 0) | 1043 XHCI_ERDP_LO_BUSY); 1044 xhci_op_write_8(sc, XHCI_DCBAAP, DMAADDR(&sc->sc_dcbaa_dma, 0)); 1045 xhci_op_write_8(sc, XHCI_CRCR, xhci_ring_trbp(&sc->sc_cr, 0) | 1046 sc->sc_cr.xr_cs); 1047 1048 #if 0 1049 hexdump("eventst", KERNADDR(&sc->sc_eventst_dma, 0), 1050 XHCI_ERSTE_SIZE * XHCI_EVENT_RING_SEGMENTS); 1051 #endif 1052 1053 xhci_rt_write_4(sc, XHCI_IMAN(0), XHCI_IMAN_INTR_ENA); 1054 if ((sc->sc_quirks & XHCI_QUIRK_INTEL) != 0) 1055 /* Intel xhci needs interrupt rate moderated. */ 1056 xhci_rt_write_4(sc, XHCI_IMOD(0), XHCI_IMOD_DEFAULT_LP); 1057 else 1058 xhci_rt_write_4(sc, XHCI_IMOD(0), 0); 1059 aprint_debug_dev(sc->sc_dev, "current IMOD %u\n", 1060 xhci_rt_read_4(sc, XHCI_IMOD(0))); 1061 1062 xhci_op_write_4(sc, XHCI_USBCMD, XHCI_CMD_INTE|XHCI_CMD_RS); /* Go! */ 1063 aprint_debug_dev(sc->sc_dev, "USBCMD %08"PRIx32"\n", 1064 xhci_op_read_4(sc, XHCI_USBCMD)); 1065 1066 return 0; 1067 1068 bad: 1069 if (sc->sc_xferpool) { 1070 pool_cache_destroy(sc->sc_xferpool); 1071 sc->sc_xferpool = NULL; 1072 } 1073 1074 if (sc->sc_slots) { 1075 kmem_free(sc->sc_slots, sizeof(*sc->sc_slots) * 1076 sc->sc_maxslots); 1077 sc->sc_slots = NULL; 1078 } 1079 1080 usb_freemem(&sc->sc_bus, &sc->sc_dcbaa_dma); 1081 bad4: 1082 usb_freemem(&sc->sc_bus, &sc->sc_eventst_dma); 1083 bad3: 1084 xhci_ring_free(sc, &sc->sc_er); 1085 bad2: 1086 xhci_ring_free(sc, &sc->sc_cr); 1087 i = sc->sc_maxspbuf; 1088 bad1: 1089 for (int j = 0; j < i; j++) 1090 usb_freemem(&sc->sc_bus, &sc->sc_spbuf_dma[j]); 1091 usb_freemem(&sc->sc_bus, &sc->sc_spbufarray_dma); 1092 1093 return rv; 1094 } 1095 1096 int 1097 xhci_intr(void *v) 1098 { 1099 struct xhci_softc * const sc = v; 1100 int ret = 0; 1101 1102 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1103 1104 if (sc == NULL) 1105 return 0; 1106 1107 mutex_spin_enter(&sc->sc_intr_lock); 1108 1109 if (sc->sc_dying || !device_has_power(sc->sc_dev)) 1110 goto done; 1111 1112 /* If we get an interrupt while polling, then just ignore it. */ 1113 if (sc->sc_bus.ub_usepolling) { 1114 #ifdef DIAGNOSTIC 1115 DPRINTFN(16, "ignored interrupt while polling", 0, 0, 0, 0); 1116 #endif 1117 goto done; 1118 } 1119 1120 ret = xhci_intr1(sc); 1121 done: 1122 mutex_spin_exit(&sc->sc_intr_lock); 1123 return ret; 1124 } 1125 1126 int 1127 xhci_intr1(struct xhci_softc * const sc) 1128 { 1129 uint32_t usbsts; 1130 uint32_t iman; 1131 1132 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1133 1134 usbsts = xhci_op_read_4(sc, XHCI_USBSTS); 1135 DPRINTFN(16, "USBSTS %08x", usbsts, 0, 0, 0); 1136 #if 0 1137 if ((usbsts & (XHCI_STS_EINT|XHCI_STS_PCD)) == 0) { 1138 return 0; 1139 } 1140 #endif 1141 xhci_op_write_4(sc, XHCI_USBSTS, 1142 usbsts & (2|XHCI_STS_EINT|XHCI_STS_PCD)); /* XXX */ 1143 usbsts = xhci_op_read_4(sc, XHCI_USBSTS); 1144 DPRINTFN(16, "USBSTS %08x", usbsts, 0, 0, 0); 1145 1146 iman = xhci_rt_read_4(sc, XHCI_IMAN(0)); 1147 DPRINTFN(16, "IMAN0 %08x", iman, 0, 0, 0); 1148 iman |= XHCI_IMAN_INTR_PEND; 1149 xhci_rt_write_4(sc, XHCI_IMAN(0), iman); 1150 iman = xhci_rt_read_4(sc, XHCI_IMAN(0)); 1151 DPRINTFN(16, "IMAN0 %08x", iman, 0, 0, 0); 1152 usbsts = xhci_op_read_4(sc, XHCI_USBSTS); 1153 DPRINTFN(16, "USBSTS %08x", usbsts, 0, 0, 0); 1154 1155 usb_schedsoftintr(&sc->sc_bus); 1156 1157 return 1; 1158 } 1159 1160 /* 1161 * 3 port speed types used in USB stack 1162 * 1163 * usbdi speed 1164 * definition: USB_SPEED_* in usb.h 1165 * They are used in struct usbd_device in USB stack. 1166 * ioctl interface uses these values too. 1167 * port_status speed 1168 * definition: UPS_*_SPEED in usb.h 1169 * They are used in usb_port_status_t and valid only for USB 2.0. 1170 * Speed value is always 0 for Super Speed or more, and dwExtPortStatus 1171 * of usb_port_status_ext_t indicates port speed. 1172 * Note that some 3.0 values overlap with 2.0 values. 1173 * (e.g. 0x200 means UPS_POER_POWER_SS in SS and 1174 * means UPS_LOW_SPEED in HS.) 1175 * port status returned from hub also uses these values. 1176 * On NetBSD UPS_OTHER_SPEED indicates port speed is super speed 1177 * or more. 1178 * xspeed: 1179 * definition: Protocol Speed ID (PSI) (xHCI 1.1 7.2.1) 1180 * They are used in only slot context and PORTSC reg of xhci. 1181 * The difference between usbdi speed and xspeed is 1182 * that FS and LS values are swapped. 1183 */ 1184 1185 /* convert usbdi speed to xspeed */ 1186 static int 1187 xhci_speed2xspeed(int speed) 1188 { 1189 switch (speed) { 1190 case USB_SPEED_LOW: return 2; 1191 case USB_SPEED_FULL: return 1; 1192 default: return speed; 1193 } 1194 } 1195 1196 #if 0 1197 /* convert xspeed to usbdi speed */ 1198 static int 1199 xhci_xspeed2speed(int xspeed) 1200 { 1201 switch (xspeed) { 1202 case 1: return USB_SPEED_FULL; 1203 case 2: return USB_SPEED_LOW; 1204 default: return xspeed; 1205 } 1206 } 1207 #endif 1208 1209 /* convert xspeed to port status speed */ 1210 static int 1211 xhci_xspeed2psspeed(int xspeed) 1212 { 1213 switch (xspeed) { 1214 case 0: return 0; 1215 case 1: return UPS_FULL_SPEED; 1216 case 2: return UPS_LOW_SPEED; 1217 case 3: return UPS_HIGH_SPEED; 1218 default: return UPS_OTHER_SPEED; 1219 } 1220 } 1221 1222 /* 1223 * Construct input contexts and issue TRB to open pipe. 1224 */ 1225 static usbd_status 1226 xhci_configure_endpoint(struct usbd_pipe *pipe) 1227 { 1228 struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); 1229 struct xhci_slot * const xs = pipe->up_dev->ud_hcpriv; 1230 const u_int dci = xhci_ep_get_dci(pipe->up_endpoint->ue_edesc); 1231 struct xhci_trb trb; 1232 usbd_status err; 1233 1234 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1235 DPRINTFN(4, "slot %u dci %u epaddr 0x%02x attr 0x%02x", 1236 xs->xs_idx, dci, pipe->up_endpoint->ue_edesc->bEndpointAddress, 1237 pipe->up_endpoint->ue_edesc->bmAttributes); 1238 1239 /* XXX ensure input context is available? */ 1240 1241 memset(xhci_slot_get_icv(sc, xs, 0), 0, sc->sc_pgsz); 1242 1243 /* set up context */ 1244 xhci_setup_ctx(pipe); 1245 1246 hexdump("input control context", xhci_slot_get_icv(sc, xs, 0), 1247 sc->sc_ctxsz * 1); 1248 hexdump("input endpoint context", xhci_slot_get_icv(sc, xs, 1249 xhci_dci_to_ici(dci)), sc->sc_ctxsz * 1); 1250 1251 trb.trb_0 = xhci_slot_get_icp(sc, xs, 0); 1252 trb.trb_2 = 0; 1253 trb.trb_3 = XHCI_TRB_3_SLOT_SET(xs->xs_idx) | 1254 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_CONFIGURE_EP); 1255 1256 err = xhci_do_command(sc, &trb, USBD_DEFAULT_TIMEOUT); 1257 1258 usb_syncmem(&xs->xs_dc_dma, 0, sc->sc_pgsz, BUS_DMASYNC_POSTREAD); 1259 hexdump("output context", xhci_slot_get_dcv(sc, xs, dci), 1260 sc->sc_ctxsz * 1); 1261 1262 return err; 1263 } 1264 1265 #if 0 1266 static usbd_status 1267 xhci_unconfigure_endpoint(struct usbd_pipe *pipe) 1268 { 1269 #ifdef USB_DEBUG 1270 struct xhci_slot * const xs = pipe->up_dev->ud_hcpriv; 1271 #endif 1272 1273 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1274 DPRINTFN(4, "slot %u", xs->xs_idx, 0, 0, 0); 1275 1276 return USBD_NORMAL_COMPLETION; 1277 } 1278 #endif 1279 1280 /* 4.6.8, 6.4.3.7 */ 1281 static usbd_status 1282 xhci_reset_endpoint(struct usbd_pipe *pipe) 1283 { 1284 struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); 1285 struct xhci_slot * const xs = pipe->up_dev->ud_hcpriv; 1286 const u_int dci = xhci_ep_get_dci(pipe->up_endpoint->ue_edesc); 1287 struct xhci_trb trb; 1288 usbd_status err; 1289 1290 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1291 DPRINTFN(4, "slot %u dci %u", xs->xs_idx, dci, 0, 0); 1292 1293 trb.trb_0 = 0; 1294 trb.trb_2 = 0; 1295 trb.trb_3 = XHCI_TRB_3_SLOT_SET(xs->xs_idx) | 1296 XHCI_TRB_3_EP_SET(dci) | 1297 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_RESET_EP); 1298 1299 err = xhci_do_command(sc, &trb, USBD_DEFAULT_TIMEOUT); 1300 1301 return err; 1302 } 1303 1304 /* 1305 * 4.6.9, 6.4.3.8 1306 * Stop execution of TDs on xfer ring. 1307 * Should be called with sc_lock held. 1308 */ 1309 static usbd_status 1310 xhci_stop_endpoint(struct usbd_pipe *pipe) 1311 { 1312 struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); 1313 struct xhci_slot * const xs = pipe->up_dev->ud_hcpriv; 1314 struct xhci_trb trb; 1315 usbd_status err; 1316 const u_int dci = xhci_ep_get_dci(pipe->up_endpoint->ue_edesc); 1317 1318 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1319 DPRINTFN(4, "slot %u dci %u", xs->xs_idx, dci, 0, 0); 1320 1321 KASSERT(mutex_owned(&sc->sc_lock)); 1322 1323 trb.trb_0 = 0; 1324 trb.trb_2 = 0; 1325 trb.trb_3 = XHCI_TRB_3_SLOT_SET(xs->xs_idx) | 1326 XHCI_TRB_3_EP_SET(dci) | 1327 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_STOP_EP); 1328 1329 err = xhci_do_command_locked(sc, &trb, USBD_DEFAULT_TIMEOUT); 1330 1331 return err; 1332 } 1333 1334 /* 1335 * Set TR Dequeue Pointer. 1336 * xHCI 1.1 4.6.10 6.4.3.9 1337 * Purge all of the TRBs on ring and reinitialize ring. 1338 * Set TR dequeue Pointr to 0 and Cycle State to 1. 1339 * EPSTATE of endpoint must be ERROR or STOPPED, otherwise CONTEXT_STATE 1340 * error will be generated. 1341 */ 1342 static usbd_status 1343 xhci_set_dequeue(struct usbd_pipe *pipe) 1344 { 1345 struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); 1346 struct xhci_slot * const xs = pipe->up_dev->ud_hcpriv; 1347 const u_int dci = xhci_ep_get_dci(pipe->up_endpoint->ue_edesc); 1348 struct xhci_ring * const xr = &xs->xs_ep[dci].xe_tr; 1349 struct xhci_trb trb; 1350 usbd_status err; 1351 1352 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1353 DPRINTFN(4, "slot %u dci %u", xs->xs_idx, dci, 0, 0); 1354 1355 xhci_host_dequeue(xr); 1356 1357 /* set DCS */ 1358 trb.trb_0 = xhci_ring_trbp(xr, 0) | 1; /* XXX */ 1359 trb.trb_2 = 0; 1360 trb.trb_3 = XHCI_TRB_3_SLOT_SET(xs->xs_idx) | 1361 XHCI_TRB_3_EP_SET(dci) | 1362 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_SET_TR_DEQUEUE); 1363 1364 err = xhci_do_command(sc, &trb, USBD_DEFAULT_TIMEOUT); 1365 1366 return err; 1367 } 1368 1369 /* 1370 * Open new pipe: called from usbd_setup_pipe_flags. 1371 * Fills methods of pipe. 1372 * If pipe is not for ep0, calls configure_endpoint. 1373 */ 1374 static usbd_status 1375 xhci_open(struct usbd_pipe *pipe) 1376 { 1377 struct usbd_device * const dev = pipe->up_dev; 1378 struct xhci_softc * const sc = XHCI_BUS2SC(dev->ud_bus); 1379 usb_endpoint_descriptor_t * const ed = pipe->up_endpoint->ue_edesc; 1380 const uint8_t xfertype = UE_GET_XFERTYPE(ed->bmAttributes); 1381 1382 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1383 DPRINTFN(1, "addr %d depth %d port %d speed %d", dev->ud_addr, 1384 dev->ud_depth, dev->ud_powersrc->up_portno, dev->ud_speed); 1385 DPRINTFN(1, " dci %u type 0x%02x epaddr 0x%02x attr 0x%02x", 1386 xhci_ep_get_dci(ed), ed->bDescriptorType, ed->bEndpointAddress, 1387 ed->bmAttributes); 1388 DPRINTFN(1, " mps %u ival %u", UGETW(ed->wMaxPacketSize), ed->bInterval, 1389 0, 0); 1390 1391 if (sc->sc_dying) 1392 return USBD_IOERROR; 1393 1394 /* Root Hub */ 1395 if (dev->ud_depth == 0 && dev->ud_powersrc->up_portno == 0) { 1396 switch (ed->bEndpointAddress) { 1397 case USB_CONTROL_ENDPOINT: 1398 pipe->up_methods = &roothub_ctrl_methods; 1399 break; 1400 case UE_DIR_IN | USBROOTHUB_INTR_ENDPT: 1401 pipe->up_methods = &xhci_root_intr_methods; 1402 break; 1403 default: 1404 pipe->up_methods = NULL; 1405 DPRINTFN(0, "bad bEndpointAddress 0x%02x", 1406 ed->bEndpointAddress, 0, 0, 0); 1407 return USBD_INVAL; 1408 } 1409 return USBD_NORMAL_COMPLETION; 1410 } 1411 1412 switch (xfertype) { 1413 case UE_CONTROL: 1414 pipe->up_methods = &xhci_device_ctrl_methods; 1415 break; 1416 case UE_ISOCHRONOUS: 1417 pipe->up_methods = &xhci_device_isoc_methods; 1418 return USBD_INVAL; 1419 break; 1420 case UE_BULK: 1421 pipe->up_methods = &xhci_device_bulk_methods; 1422 break; 1423 case UE_INTERRUPT: 1424 pipe->up_methods = &xhci_device_intr_methods; 1425 break; 1426 default: 1427 return USBD_IOERROR; 1428 break; 1429 } 1430 1431 if (ed->bEndpointAddress != USB_CONTROL_ENDPOINT) 1432 return xhci_configure_endpoint(pipe); 1433 1434 return USBD_NORMAL_COMPLETION; 1435 } 1436 1437 /* 1438 * Closes pipe, called from usbd_kill_pipe via close methods. 1439 * If the endpoint to be closed is ep0, disable_slot. 1440 * Should be called with sc_lock held. 1441 */ 1442 static void 1443 xhci_close_pipe(struct usbd_pipe *pipe) 1444 { 1445 struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); 1446 struct xhci_slot * const xs = pipe->up_dev->ud_hcpriv; 1447 usb_endpoint_descriptor_t * const ed = pipe->up_endpoint->ue_edesc; 1448 const u_int dci = xhci_ep_get_dci(ed); 1449 struct xhci_trb trb; 1450 uint32_t *cp; 1451 1452 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1453 1454 if (sc->sc_dying) 1455 return; 1456 1457 /* xs is uninitialized before xhci_init_slot */ 1458 if (xs == NULL || xs->xs_idx == 0) 1459 return; 1460 1461 DPRINTFN(4, "pipe %p slot %u dci %u", pipe, xs->xs_idx, dci, 0); 1462 1463 KASSERTMSG(!cpu_intr_p() && !cpu_softintr_p(), "called from intr ctx"); 1464 KASSERT(mutex_owned(&sc->sc_lock)); 1465 1466 if (pipe->up_dev->ud_depth == 0) 1467 return; 1468 1469 if (dci == XHCI_DCI_EP_CONTROL) { 1470 DPRINTFN(4, "closing ep0", 0, 0, 0, 0); 1471 xhci_disable_slot(sc, xs->xs_idx); 1472 return; 1473 } 1474 1475 /* 1476 * This may fail in the case that xhci_close_pipe is called after 1477 * xhci_abort_xfer e.g. usbd_kill_pipe. 1478 */ 1479 (void)xhci_stop_endpoint(pipe); 1480 1481 /* 1482 * set appropriate bit to be dropped. 1483 * don't set DC bit to 1, otherwise all endpoints 1484 * would be deconfigured. 1485 */ 1486 cp = xhci_slot_get_icv(sc, xs, XHCI_ICI_INPUT_CONTROL); 1487 cp[0] = htole32(XHCI_INCTX_0_DROP_MASK(dci)); 1488 cp[1] = htole32(0); 1489 1490 /* XXX should be most significant one, not dci? */ 1491 cp = xhci_slot_get_icv(sc, xs, xhci_dci_to_ici(XHCI_DCI_SLOT)); 1492 cp[0] = htole32(XHCI_SCTX_0_CTX_NUM_SET(dci)); 1493 1494 /* configure ep context performs an implicit dequeue */ 1495 xhci_host_dequeue(&xs->xs_ep[dci].xe_tr); 1496 1497 /* sync input contexts before they are read from memory */ 1498 usb_syncmem(&xs->xs_ic_dma, 0, sc->sc_pgsz, BUS_DMASYNC_PREWRITE); 1499 1500 trb.trb_0 = xhci_slot_get_icp(sc, xs, 0); 1501 trb.trb_2 = 0; 1502 trb.trb_3 = XHCI_TRB_3_SLOT_SET(xs->xs_idx) | 1503 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_CONFIGURE_EP); 1504 1505 (void)xhci_do_command_locked(sc, &trb, USBD_DEFAULT_TIMEOUT); 1506 usb_syncmem(&xs->xs_dc_dma, 0, sc->sc_pgsz, BUS_DMASYNC_POSTREAD); 1507 } 1508 1509 /* 1510 * Abort transfer. 1511 * May be called from softintr context. 1512 */ 1513 static void 1514 xhci_abort_xfer(struct usbd_xfer *xfer, usbd_status status) 1515 { 1516 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 1517 1518 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1519 DPRINTFN(4, "xfer %p pipe %p status %d", 1520 xfer, xfer->ux_pipe, status, 0); 1521 1522 KASSERT(mutex_owned(&sc->sc_lock)); 1523 1524 if (sc->sc_dying) { 1525 /* If we're dying, just do the software part. */ 1526 DPRINTFN(4, "xfer %p dying %u", xfer, xfer->ux_status, 0, 0); 1527 xfer->ux_status = status; 1528 callout_stop(&xfer->ux_callout); 1529 usb_transfer_complete(xfer); 1530 return; 1531 } 1532 1533 /* XXX need more stuff */ 1534 xfer->ux_status = status; 1535 callout_stop(&xfer->ux_callout); 1536 usb_transfer_complete(xfer); 1537 DPRINTFN(14, "end", 0, 0, 0, 0); 1538 1539 KASSERT(mutex_owned(&sc->sc_lock)); 1540 } 1541 1542 static void 1543 xhci_host_dequeue(struct xhci_ring * const xr) 1544 { 1545 /* When dequeueing the controller, update our struct copy too */ 1546 memset(xr->xr_trb, 0, xr->xr_ntrb * XHCI_TRB_SIZE); 1547 usb_syncmem(&xr->xr_dma, 0, xr->xr_ntrb * XHCI_TRB_SIZE, 1548 BUS_DMASYNC_PREWRITE); 1549 memset(xr->xr_cookies, 0, xr->xr_ntrb * sizeof(*xr->xr_cookies)); 1550 1551 xr->xr_ep = 0; 1552 xr->xr_cs = 1; 1553 } 1554 1555 /* 1556 * Recover STALLed endpoint. 1557 * xHCI 1.1 sect 4.10.2.1 1558 * Issue RESET_EP to recover halt condition and SET_TR_DEQUEUE to remove 1559 * all transfers on transfer ring. 1560 * These are done in thread context asynchronously. 1561 */ 1562 static void 1563 xhci_clear_endpoint_stall_async_task(void *cookie) 1564 { 1565 struct usbd_xfer * const xfer = cookie; 1566 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 1567 struct xhci_slot * const xs = xfer->ux_pipe->up_dev->ud_hcpriv; 1568 const u_int dci = xhci_ep_get_dci(xfer->ux_pipe->up_endpoint->ue_edesc); 1569 struct xhci_ring * const tr = &xs->xs_ep[dci].xe_tr; 1570 1571 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1572 DPRINTFN(4, "xfer %p slot %u dci %u", xfer, xs->xs_idx, dci, 0); 1573 1574 xhci_reset_endpoint(xfer->ux_pipe); 1575 xhci_set_dequeue(xfer->ux_pipe); 1576 1577 mutex_enter(&sc->sc_lock); 1578 tr->is_halted = false; 1579 usb_transfer_complete(xfer); 1580 mutex_exit(&sc->sc_lock); 1581 DPRINTFN(4, "ends", 0, 0, 0, 0); 1582 } 1583 1584 static usbd_status 1585 xhci_clear_endpoint_stall_async(struct usbd_xfer *xfer) 1586 { 1587 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 1588 struct xhci_pipe * const xp = (struct xhci_pipe *)xfer->ux_pipe; 1589 1590 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1591 DPRINTFN(4, "xfer %p", xfer, 0, 0, 0); 1592 1593 if (sc->sc_dying) { 1594 return USBD_IOERROR; 1595 } 1596 1597 usb_init_task(&xp->xp_async_task, 1598 xhci_clear_endpoint_stall_async_task, xfer, USB_TASKQ_MPSAFE); 1599 usb_add_task(xfer->ux_pipe->up_dev, &xp->xp_async_task, USB_TASKQ_HC); 1600 DPRINTFN(4, "ends", 0, 0, 0, 0); 1601 1602 return USBD_NORMAL_COMPLETION; 1603 } 1604 1605 /* Process roothub port status/change events and notify to uhub_intr. */ 1606 static void 1607 xhci_rhpsc(struct xhci_softc * const sc, u_int port) 1608 { 1609 struct usbd_xfer * const xfer = sc->sc_intrxfer; 1610 uint8_t *p; 1611 1612 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1613 DPRINTFN(4, "xhci%d: port %u status change", device_unit(sc->sc_dev), 1614 port, 0, 0); 1615 1616 if (xfer == NULL) 1617 return; 1618 1619 if (port > sc->sc_maxports) 1620 return; 1621 1622 p = xfer->ux_buf; 1623 memset(p, 0, xfer->ux_length); 1624 p[port/NBBY] |= 1 << (port%NBBY); 1625 xfer->ux_actlen = xfer->ux_length; 1626 xfer->ux_status = USBD_NORMAL_COMPLETION; 1627 usb_transfer_complete(xfer); 1628 } 1629 1630 /* Process Transfer Events */ 1631 static void 1632 xhci_event_transfer(struct xhci_softc * const sc, 1633 const struct xhci_trb * const trb) 1634 { 1635 uint64_t trb_0; 1636 uint32_t trb_2, trb_3; 1637 uint8_t trbcode; 1638 u_int slot, dci; 1639 struct xhci_slot *xs; 1640 struct xhci_ring *xr; 1641 struct xhci_xfer *xx; 1642 struct usbd_xfer *xfer; 1643 usbd_status err; 1644 1645 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1646 1647 trb_0 = le64toh(trb->trb_0); 1648 trb_2 = le32toh(trb->trb_2); 1649 trb_3 = le32toh(trb->trb_3); 1650 trbcode = XHCI_TRB_2_ERROR_GET(trb_2); 1651 slot = XHCI_TRB_3_SLOT_GET(trb_3); 1652 dci = XHCI_TRB_3_EP_GET(trb_3); 1653 xs = &sc->sc_slots[slot]; 1654 xr = &xs->xs_ep[dci].xe_tr; 1655 1656 /* sanity check */ 1657 KASSERTMSG(xs->xs_idx != 0 && xs->xs_idx <= sc->sc_maxslots, 1658 "invalid xs_idx %u slot %u", xs->xs_idx, slot); 1659 1660 int idx = 0; 1661 if ((trb_3 & XHCI_TRB_3_ED_BIT) == 0) { 1662 if (xhci_trb_get_idx(xr, trb_0, &idx)) { 1663 DPRINTFN(0, "invalid trb_0 0x%"PRIx64, trb_0, 0, 0, 0); 1664 return; 1665 } 1666 xx = xr->xr_cookies[idx]; 1667 1668 /* 1669 * If endpoint is stopped between TDs, TRB pointer points at 1670 * next TRB, however, it is not put yet or is a garbage TRB. 1671 * That's why xr_cookies may be NULL or look like broken. 1672 * Note: this ev happens only when hciversion >= 1.0 or 1673 * hciversion == 0.96 and FSE of hcc1 is set. 1674 */ 1675 if (xx == NULL || trbcode == XHCI_TRB_ERROR_LENGTH) { 1676 DPRINTFN(1, "Ignore #%u: cookie %p cc %u dci %u", 1677 idx, xx, trbcode, dci); 1678 DPRINTFN(1, " orig TRB %"PRIx64" type %u", trb_0, 1679 XHCI_TRB_3_TYPE_GET(le32toh(xr->xr_trb[idx].trb_3)), 1680 0, 0); 1681 } 1682 } else { 1683 /* When ED != 0, trb_0 is virtual addr of struct xhci_xfer. */ 1684 xx = (void *)(uintptr_t)(trb_0 & ~0x3); 1685 } 1686 /* XXX this may not happen */ 1687 if (xx == NULL) { 1688 DPRINTFN(1, "xfer done: xx is NULL", 0, 0, 0, 0); 1689 return; 1690 } 1691 xfer = &xx->xx_xfer; 1692 /* XXX this may happen when detaching */ 1693 if (xfer == NULL) { 1694 DPRINTFN(1, "xx(%p)->xx_xfer is NULL trb_0 %#"PRIx64, 1695 xx, trb_0, 0, 0); 1696 return; 1697 } 1698 DPRINTFN(14, "xfer %p", xfer, 0, 0, 0); 1699 /* XXX I dunno why this happens */ 1700 KASSERTMSG(xfer->ux_pipe != NULL, "xfer(%p)->ux_pipe is NULL", xfer); 1701 1702 if (!xfer->ux_pipe->up_repeat && 1703 SIMPLEQ_EMPTY(&xfer->ux_pipe->up_queue)) { 1704 DPRINTFN(1, "xfer(%p)->pipe not queued", xfer, 0, 0, 0); 1705 return; 1706 } 1707 1708 /* 4.11.5.2 Event Data TRB */ 1709 if ((trb_3 & XHCI_TRB_3_ED_BIT) != 0) { 1710 DPRINTFN(14, "transfer Event Data: 0x%016"PRIx64" 0x%08"PRIx32 1711 " %02x", trb_0, XHCI_TRB_2_REM_GET(trb_2), trbcode, 0); 1712 if ((trb_0 & 0x3) == 0x3) { 1713 xfer->ux_actlen = XHCI_TRB_2_REM_GET(trb_2); 1714 } 1715 } 1716 1717 switch (trbcode) { 1718 case XHCI_TRB_ERROR_SHORT_PKT: 1719 case XHCI_TRB_ERROR_SUCCESS: 1720 /* 1721 * A ctrl transfer generates two events if it has a Data stage. 1722 * After a successful Data stage we cannot call call 1723 * usb_transfer_complete - this can only happen after the Data 1724 * stage. 1725 * 1726 * Note: Data and Status stage events point at same xfer. 1727 * ux_actlen and ux_dmabuf will be passed to 1728 * usb_transfer_complete after the Status stage event. 1729 * 1730 * It can be distingished which stage generates the event: 1731 * + by checking least 3 bits of trb_0 if ED==1. 1732 * (see xhci_device_ctrl_start). 1733 * + by checking the type of original TRB if ED==0. 1734 * 1735 * In addition, intr, bulk, and isoc transfer currently 1736 * consists of single TD, so the "skip" is not needed. 1737 * ctrl xfer uses EVENT_DATA, and others do not. 1738 * Thus driver can switch the flow by checking ED bit. 1739 */ 1740 xfer->ux_actlen = 1741 xfer->ux_length - XHCI_TRB_2_REM_GET(trb_2); 1742 err = USBD_NORMAL_COMPLETION; 1743 break; 1744 case XHCI_TRB_ERROR_STALL: 1745 case XHCI_TRB_ERROR_BABBLE: 1746 DPRINTFN(1, "ERR %u slot %u dci %u", trbcode, slot, dci, 0); 1747 xr->is_halted = true; 1748 err = USBD_STALLED; 1749 /* 1750 * Stalled endpoints can be recoverd by issuing 1751 * command TRB TYPE_RESET_EP on xHCI instead of 1752 * issuing request CLEAR_FEATURE UF_ENDPOINT_HALT 1753 * on the endpoint. However, this function may be 1754 * called from softint context (e.g. from umass), 1755 * in that case driver gets KASSERT in cv_timedwait 1756 * in xhci_do_command. 1757 * To avoid this, this runs reset_endpoint and 1758 * usb_transfer_complete in usb task thread 1759 * asynchronously (and then umass issues clear 1760 * UF_ENDPOINT_HALT). 1761 */ 1762 xfer->ux_status = err; 1763 callout_stop(&xfer->ux_callout); 1764 xhci_clear_endpoint_stall_async(xfer); 1765 return; 1766 default: 1767 DPRINTFN(1, "ERR %u slot %u dci %u", trbcode, slot, dci, 0); 1768 err = USBD_IOERROR; 1769 break; 1770 } 1771 xfer->ux_status = err; 1772 1773 if ((trb_3 & XHCI_TRB_3_ED_BIT) != 0) { 1774 if ((trb_0 & 0x3) == 0x0) { 1775 callout_stop(&xfer->ux_callout); 1776 usb_transfer_complete(xfer); 1777 } 1778 } else { 1779 callout_stop(&xfer->ux_callout); 1780 usb_transfer_complete(xfer); 1781 } 1782 } 1783 1784 /* Process Command complete events */ 1785 static void 1786 xhci_event_cmd(struct xhci_softc * const sc, const struct xhci_trb * const trb) 1787 { 1788 uint64_t trb_0; 1789 uint32_t trb_2, trb_3; 1790 1791 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1792 1793 trb_0 = le64toh(trb->trb_0); 1794 trb_2 = le32toh(trb->trb_2); 1795 trb_3 = le32toh(trb->trb_3); 1796 1797 if (trb_0 == sc->sc_command_addr) { 1798 sc->sc_result_trb.trb_0 = trb_0; 1799 sc->sc_result_trb.trb_2 = trb_2; 1800 sc->sc_result_trb.trb_3 = trb_3; 1801 if (XHCI_TRB_2_ERROR_GET(trb_2) != 1802 XHCI_TRB_ERROR_SUCCESS) { 1803 DPRINTFN(1, "command completion " 1804 "failure: 0x%016"PRIx64" 0x%08"PRIx32" " 1805 "0x%08"PRIx32, trb_0, trb_2, trb_3, 0); 1806 } 1807 cv_signal(&sc->sc_command_cv); 1808 } else { 1809 DPRINTFN(1, "spurious event: %p 0x%016"PRIx64" " 1810 "0x%08"PRIx32" 0x%08"PRIx32, trb, trb_0, 1811 trb_2, trb_3); 1812 } 1813 } 1814 1815 /* 1816 * Process events. 1817 * called from xhci_softintr 1818 */ 1819 static void 1820 xhci_handle_event(struct xhci_softc * const sc, 1821 const struct xhci_trb * const trb) 1822 { 1823 uint64_t trb_0; 1824 uint32_t trb_2, trb_3; 1825 1826 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1827 1828 trb_0 = le64toh(trb->trb_0); 1829 trb_2 = le32toh(trb->trb_2); 1830 trb_3 = le32toh(trb->trb_3); 1831 1832 DPRINTFN(14, "event: %p 0x%016"PRIx64" 0x%08"PRIx32" 0x%08"PRIx32, 1833 trb, trb_0, trb_2, trb_3); 1834 1835 /* 1836 * 4.11.3.1, 6.4.2.1 1837 * TRB Pointer is invalid for these completion codes. 1838 */ 1839 switch (XHCI_TRB_2_ERROR_GET(trb_2)) { 1840 case XHCI_TRB_ERROR_RING_UNDERRUN: 1841 case XHCI_TRB_ERROR_RING_OVERRUN: 1842 case XHCI_TRB_ERROR_VF_RING_FULL: 1843 return; 1844 default: 1845 if (trb_0 == 0) { 1846 return; 1847 } 1848 break; 1849 } 1850 1851 switch (XHCI_TRB_3_TYPE_GET(trb_3)) { 1852 case XHCI_TRB_EVENT_TRANSFER: 1853 xhci_event_transfer(sc, trb); 1854 break; 1855 case XHCI_TRB_EVENT_CMD_COMPLETE: 1856 xhci_event_cmd(sc, trb); 1857 break; 1858 case XHCI_TRB_EVENT_PORT_STS_CHANGE: 1859 xhci_rhpsc(sc, (uint32_t)((trb_0 >> 24) & 0xff)); 1860 break; 1861 default: 1862 break; 1863 } 1864 } 1865 1866 static void 1867 xhci_softintr(void *v) 1868 { 1869 struct usbd_bus * const bus = v; 1870 struct xhci_softc * const sc = XHCI_BUS2SC(bus); 1871 struct xhci_ring * const er = &sc->sc_er; 1872 struct xhci_trb *trb; 1873 int i, j, k; 1874 1875 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1876 1877 KASSERT(sc->sc_bus.ub_usepolling || mutex_owned(&sc->sc_lock)); 1878 1879 i = er->xr_ep; 1880 j = er->xr_cs; 1881 1882 DPRINTFN(16, "er: xr_ep %d xr_cs %d", i, j, 0, 0); 1883 1884 while (1) { 1885 usb_syncmem(&er->xr_dma, XHCI_TRB_SIZE * i, XHCI_TRB_SIZE, 1886 BUS_DMASYNC_POSTREAD); 1887 trb = &er->xr_trb[i]; 1888 k = (le32toh(trb->trb_3) & XHCI_TRB_3_CYCLE_BIT) ? 1 : 0; 1889 1890 if (j != k) 1891 break; 1892 1893 xhci_handle_event(sc, trb); 1894 1895 i++; 1896 if (i == er->xr_ntrb) { 1897 i = 0; 1898 j ^= 1; 1899 } 1900 } 1901 1902 er->xr_ep = i; 1903 er->xr_cs = j; 1904 1905 xhci_rt_write_8(sc, XHCI_ERDP(0), xhci_ring_trbp(er, er->xr_ep) | 1906 XHCI_ERDP_LO_BUSY); 1907 1908 DPRINTFN(16, "ends", 0, 0, 0, 0); 1909 1910 return; 1911 } 1912 1913 static void 1914 xhci_poll(struct usbd_bus *bus) 1915 { 1916 struct xhci_softc * const sc = XHCI_BUS2SC(bus); 1917 1918 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1919 1920 mutex_spin_enter(&sc->sc_intr_lock); 1921 xhci_intr1(sc); 1922 mutex_spin_exit(&sc->sc_intr_lock); 1923 1924 return; 1925 } 1926 1927 static struct usbd_xfer * 1928 xhci_allocx(struct usbd_bus *bus, unsigned int nframes) 1929 { 1930 struct xhci_softc * const sc = XHCI_BUS2SC(bus); 1931 struct usbd_xfer *xfer; 1932 1933 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1934 1935 xfer = pool_cache_get(sc->sc_xferpool, PR_NOWAIT); 1936 if (xfer != NULL) { 1937 memset(xfer, 0, sizeof(struct xhci_xfer)); 1938 #ifdef DIAGNOSTIC 1939 xfer->ux_state = XFER_BUSY; 1940 #endif 1941 } 1942 1943 return xfer; 1944 } 1945 1946 static void 1947 xhci_freex(struct usbd_bus *bus, struct usbd_xfer *xfer) 1948 { 1949 struct xhci_softc * const sc = XHCI_BUS2SC(bus); 1950 1951 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1952 1953 #ifdef DIAGNOSTIC 1954 if (xfer->ux_state != XFER_BUSY) { 1955 DPRINTFN(0, "xfer=%p not busy, 0x%08x", 1956 xfer, xfer->ux_state, 0, 0); 1957 } 1958 xfer->ux_state = XFER_FREE; 1959 #endif 1960 pool_cache_put(sc->sc_xferpool, xfer); 1961 } 1962 1963 static void 1964 xhci_get_lock(struct usbd_bus *bus, kmutex_t **lock) 1965 { 1966 struct xhci_softc * const sc = XHCI_BUS2SC(bus); 1967 1968 *lock = &sc->sc_lock; 1969 } 1970 1971 extern uint32_t usb_cookie_no; 1972 1973 /* 1974 * xHCI 4.3 1975 * Called when uhub_explore finds a new device (via usbd_new_device). 1976 * Port initialization and speed detection (4.3.1) are already done in uhub.c. 1977 * This function does: 1978 * Allocate and construct dev structure of default endpoint (ep0). 1979 * Allocate and open pipe of ep0. 1980 * Enable slot and initialize slot context. 1981 * Set Address. 1982 * Read initial device descriptor. 1983 * Determine initial MaxPacketSize (mps) by speed. 1984 * Read full device descriptor. 1985 * Register this device. 1986 * Finally state of device transitions ADDRESSED. 1987 */ 1988 static usbd_status 1989 xhci_new_device(device_t parent, struct usbd_bus *bus, int depth, 1990 int speed, int port, struct usbd_port *up) 1991 { 1992 struct xhci_softc * const sc = XHCI_BUS2SC(bus); 1993 struct usbd_device *dev; 1994 usbd_status err; 1995 usb_device_descriptor_t *dd; 1996 struct xhci_slot *xs; 1997 uint32_t *cp; 1998 1999 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2000 DPRINTFN(4, "port %u depth %u speed %u up %p", port, depth, speed, up); 2001 2002 dev = kmem_zalloc(sizeof(*dev), KM_SLEEP); 2003 if (dev == NULL) 2004 return USBD_NOMEM; 2005 2006 dev->ud_bus = bus; 2007 dev->ud_quirks = &usbd_no_quirk; 2008 dev->ud_addr = 0; 2009 dev->ud_ddesc.bMaxPacketSize = 0; 2010 dev->ud_depth = depth; 2011 dev->ud_powersrc = up; 2012 dev->ud_myhub = up->up_parent; 2013 dev->ud_speed = speed; 2014 dev->ud_langid = USBD_NOLANG; 2015 dev->ud_cookie.cookie = ++usb_cookie_no; 2016 2017 /* Set up default endpoint handle. */ 2018 dev->ud_ep0.ue_edesc = &dev->ud_ep0desc; 2019 /* doesn't matter, just don't let it uninitialized */ 2020 dev->ud_ep0.ue_toggle = 0; 2021 2022 /* Set up default endpoint descriptor. */ 2023 dev->ud_ep0desc.bLength = USB_ENDPOINT_DESCRIPTOR_SIZE; 2024 dev->ud_ep0desc.bDescriptorType = UDESC_ENDPOINT; 2025 dev->ud_ep0desc.bEndpointAddress = USB_CONTROL_ENDPOINT; 2026 dev->ud_ep0desc.bmAttributes = UE_CONTROL; 2027 dev->ud_ep0desc.bInterval = 0; 2028 2029 /* 4.3, 4.8.2.1 */ 2030 switch (speed) { 2031 case USB_SPEED_SUPER: 2032 case USB_SPEED_SUPER_PLUS: 2033 USETW(dev->ud_ep0desc.wMaxPacketSize, USB_3_MAX_CTRL_PACKET); 2034 break; 2035 case USB_SPEED_FULL: 2036 /* XXX using 64 as initial mps of ep0 in FS */ 2037 case USB_SPEED_HIGH: 2038 USETW(dev->ud_ep0desc.wMaxPacketSize, USB_2_MAX_CTRL_PACKET); 2039 break; 2040 case USB_SPEED_LOW: 2041 default: 2042 USETW(dev->ud_ep0desc.wMaxPacketSize, USB_MAX_IPACKET); 2043 break; 2044 } 2045 2046 up->up_dev = dev; 2047 2048 /* Establish the default pipe. */ 2049 err = usbd_setup_pipe(dev, 0, &dev->ud_ep0, USBD_DEFAULT_INTERVAL, 2050 &dev->ud_pipe0); 2051 if (err) { 2052 goto bad; 2053 } 2054 2055 dd = &dev->ud_ddesc; 2056 2057 if ((depth == 0) && (port == 0)) { 2058 KASSERT(bus->ub_devices[dev->ud_addr] == NULL); 2059 bus->ub_devices[dev->ud_addr] = dev; 2060 err = usbd_get_initial_ddesc(dev, dd); 2061 if (err) { 2062 DPRINTFN(1, "get_initial_ddesc %u", err, 0, 0, 0); 2063 goto bad; 2064 } 2065 2066 err = usbd_reload_device_desc(dev); 2067 if (err) { 2068 DPRINTFN(1, "reload desc %u", err, 0, 0, 0); 2069 goto bad; 2070 } 2071 } else { 2072 uint8_t slot = 0; 2073 2074 /* 4.3.2 */ 2075 err = xhci_enable_slot(sc, &slot); 2076 if (err) 2077 goto bad; 2078 2079 xs = &sc->sc_slots[slot]; 2080 dev->ud_hcpriv = xs; 2081 2082 /* 4.3.3 initialize slot structure */ 2083 err = xhci_init_slot(dev, slot); 2084 if (err) { 2085 dev->ud_hcpriv = NULL; 2086 /* 2087 * We have to disable_slot here because 2088 * xs->xs_idx == 0 when xhci_init_slot fails, 2089 * in that case usbd_remove_dev won't work. 2090 */ 2091 mutex_enter(&sc->sc_lock); 2092 xhci_disable_slot(sc, slot); 2093 mutex_exit(&sc->sc_lock); 2094 goto bad; 2095 } 2096 2097 /* 4.3.4 Address Assignment */ 2098 err = xhci_set_address(dev, slot, false); 2099 if (err) { 2100 DPRINTFN(1, "set address w/o bsr %u", err, 0, 0, 0); 2101 goto bad; 2102 } 2103 2104 /* Allow device time to set new address */ 2105 usbd_delay_ms(dev, USB_SET_ADDRESS_SETTLE); 2106 2107 cp = xhci_slot_get_dcv(sc, xs, XHCI_DCI_SLOT); 2108 //hexdump("slot context", cp, sc->sc_ctxsz); 2109 uint8_t addr = XHCI_SCTX_3_DEV_ADDR_GET(cp[3]); 2110 DPRINTFN(4, "device address %u", addr, 0, 0, 0); 2111 /* XXX ensure we know when the hardware does something 2112 we can't yet cope with */ 2113 KASSERTMSG(addr >= 1 && addr <= 127, "addr %d", addr); 2114 dev->ud_addr = addr; 2115 /* XXX dev->ud_addr not necessarily unique on bus */ 2116 KASSERT(bus->ub_devices[dev->ud_addr] == NULL); 2117 bus->ub_devices[dev->ud_addr] = dev; 2118 2119 err = usbd_get_initial_ddesc(dev, dd); 2120 if (err) { 2121 DPRINTFN(1, "get_initial_ddesc %u", err, 0, 0, 0); 2122 goto bad; 2123 } 2124 2125 /* 4.8.2.1 */ 2126 if (USB_IS_SS(speed)) { 2127 if (dd->bMaxPacketSize != 9) { 2128 printf("%s: invalid mps 2^%u for SS ep0," 2129 " using 512\n", 2130 device_xname(sc->sc_dev), 2131 dd->bMaxPacketSize); 2132 dd->bMaxPacketSize = 9; 2133 } 2134 USETW(dev->ud_ep0desc.wMaxPacketSize, 2135 (1 << dd->bMaxPacketSize)); 2136 } else 2137 USETW(dev->ud_ep0desc.wMaxPacketSize, 2138 dd->bMaxPacketSize); 2139 DPRINTFN(4, "bMaxPacketSize %u", dd->bMaxPacketSize, 0, 0, 0); 2140 xhci_update_ep0_mps(sc, xs, 2141 UGETW(dev->ud_ep0desc.wMaxPacketSize)); 2142 2143 err = usbd_reload_device_desc(dev); 2144 if (err) { 2145 DPRINTFN(1, "reload desc %u", err, 0, 0, 0); 2146 goto bad; 2147 } 2148 } 2149 2150 DPRINTFN(1, "adding unit addr=%d, rev=%02x,", 2151 dev->ud_addr, UGETW(dd->bcdUSB), 0, 0); 2152 DPRINTFN(1, " class=%d, subclass=%d, protocol=%d,", 2153 dd->bDeviceClass, dd->bDeviceSubClass, 2154 dd->bDeviceProtocol, 0); 2155 DPRINTFN(1, " mps=%d, len=%d, noconf=%d, speed=%d", 2156 dd->bMaxPacketSize, dd->bLength, dd->bNumConfigurations, 2157 dev->ud_speed); 2158 2159 usbd_get_device_strings(dev); 2160 2161 usbd_add_dev_event(USB_EVENT_DEVICE_ATTACH, dev); 2162 2163 if ((depth == 0) && (port == 0)) { 2164 usbd_attach_roothub(parent, dev); 2165 DPRINTFN(1, "root_hub %p", bus->ub_roothub, 0, 0, 0); 2166 return USBD_NORMAL_COMPLETION; 2167 } 2168 2169 2170 err = usbd_probe_and_attach(parent, dev, port, dev->ud_addr); 2171 bad: 2172 if (err != USBD_NORMAL_COMPLETION) { 2173 usbd_remove_device(dev, up); 2174 } 2175 2176 return err; 2177 } 2178 2179 static usbd_status 2180 xhci_ring_init(struct xhci_softc * const sc, struct xhci_ring * const xr, 2181 size_t ntrb, size_t align) 2182 { 2183 usbd_status err; 2184 size_t size = ntrb * XHCI_TRB_SIZE; 2185 2186 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2187 2188 err = usb_allocmem(&sc->sc_bus, size, align, &xr->xr_dma); 2189 if (err) 2190 return err; 2191 mutex_init(&xr->xr_lock, MUTEX_DEFAULT, IPL_SOFTUSB); 2192 xr->xr_cookies = kmem_zalloc(sizeof(*xr->xr_cookies) * ntrb, KM_SLEEP); 2193 xr->xr_trb = xhci_ring_trbv(xr, 0); 2194 xr->xr_ntrb = ntrb; 2195 xr->is_halted = false; 2196 xhci_host_dequeue(xr); 2197 2198 return USBD_NORMAL_COMPLETION; 2199 } 2200 2201 static void 2202 xhci_ring_free(struct xhci_softc * const sc, struct xhci_ring * const xr) 2203 { 2204 usb_freemem(&sc->sc_bus, &xr->xr_dma); 2205 mutex_destroy(&xr->xr_lock); 2206 kmem_free(xr->xr_cookies, sizeof(*xr->xr_cookies) * xr->xr_ntrb); 2207 } 2208 2209 static void 2210 xhci_ring_put(struct xhci_softc * const sc, struct xhci_ring * const xr, 2211 void *cookie, struct xhci_trb * const trbs, size_t ntrbs) 2212 { 2213 size_t i; 2214 u_int ri; 2215 u_int cs; 2216 uint64_t parameter; 2217 uint32_t status; 2218 uint32_t control; 2219 2220 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2221 2222 KASSERTMSG(ntrbs <= XHCI_XFER_NTRB, "ntrbs %zu", ntrbs); 2223 for (i = 0; i < ntrbs; i++) { 2224 DPRINTFN(12, "xr %p trbs %p num %zu", xr, trbs, i, 0); 2225 DPRINTFN(12, " %016"PRIx64" %08"PRIx32" %08"PRIx32, 2226 trbs[i].trb_0, trbs[i].trb_2, trbs[i].trb_3, 0); 2227 KASSERTMSG(XHCI_TRB_3_TYPE_GET(trbs[i].trb_3) != 2228 XHCI_TRB_TYPE_LINK, "trb3 type %d", trbs[i].trb_3); 2229 } 2230 2231 DPRINTFN(12, "%p xr_ep 0x%x xr_cs %u", xr, xr->xr_ep, xr->xr_cs, 0); 2232 2233 ri = xr->xr_ep; 2234 cs = xr->xr_cs; 2235 2236 /* 2237 * Although the xhci hardware can do scatter/gather dma from 2238 * arbitrary sized buffers, there is a non-obvious restriction 2239 * that a LINK trb is only allowed at the end of a burst of 2240 * transfers - which might be 16kB. 2241 * Arbitrary aligned LINK trb definitely fail on Ivy bridge. 2242 * The simple solution is not to allow a LINK trb in the middle 2243 * of anything - as here. 2244 * XXX: (dsl) There are xhci controllers out there (eg some made by 2245 * ASMedia) that seem to lock up if they process a LINK trb but 2246 * cannot process the linked-to trb yet. 2247 * The code should write the 'cycle' bit on the link trb AFTER 2248 * adding the other trb. 2249 */ 2250 if (ri + ntrbs >= (xr->xr_ntrb - 1)) { 2251 parameter = xhci_ring_trbp(xr, 0); 2252 status = 0; 2253 control = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_LINK) | 2254 XHCI_TRB_3_TC_BIT | (cs ? XHCI_TRB_3_CYCLE_BIT : 0); 2255 xhci_trb_put(&xr->xr_trb[ri], parameter, status, control); 2256 usb_syncmem(&xr->xr_dma, XHCI_TRB_SIZE * ri, XHCI_TRB_SIZE * 1, 2257 BUS_DMASYNC_PREWRITE); 2258 xr->xr_cookies[ri] = NULL; 2259 xr->xr_ep = 0; 2260 xr->xr_cs ^= 1; 2261 ri = xr->xr_ep; 2262 cs = xr->xr_cs; 2263 } 2264 2265 ri++; 2266 2267 /* Write any subsequent TRB first */ 2268 for (i = 1; i < ntrbs; i++) { 2269 parameter = trbs[i].trb_0; 2270 status = trbs[i].trb_2; 2271 control = trbs[i].trb_3; 2272 2273 if (cs) { 2274 control |= XHCI_TRB_3_CYCLE_BIT; 2275 } else { 2276 control &= ~XHCI_TRB_3_CYCLE_BIT; 2277 } 2278 2279 xhci_trb_put(&xr->xr_trb[ri], parameter, status, control); 2280 usb_syncmem(&xr->xr_dma, XHCI_TRB_SIZE * ri, XHCI_TRB_SIZE * 1, 2281 BUS_DMASYNC_PREWRITE); 2282 xr->xr_cookies[ri] = cookie; 2283 ri++; 2284 } 2285 2286 /* Write the first TRB last */ 2287 i = 0; 2288 parameter = trbs[i].trb_0; 2289 status = trbs[i].trb_2; 2290 control = trbs[i].trb_3; 2291 2292 if (xr->xr_cs) { 2293 control |= XHCI_TRB_3_CYCLE_BIT; 2294 } else { 2295 control &= ~XHCI_TRB_3_CYCLE_BIT; 2296 } 2297 2298 xhci_trb_put(&xr->xr_trb[xr->xr_ep], parameter, status, control); 2299 usb_syncmem(&xr->xr_dma, XHCI_TRB_SIZE * xr->xr_ep, XHCI_TRB_SIZE * 1, 2300 BUS_DMASYNC_PREWRITE); 2301 xr->xr_cookies[xr->xr_ep] = cookie; 2302 2303 xr->xr_ep = ri; 2304 xr->xr_cs = cs; 2305 2306 DPRINTFN(12, "%p xr_ep 0x%x xr_cs %u", xr, xr->xr_ep, xr->xr_cs, 0); 2307 } 2308 2309 /* 2310 * Stop execution commands, purge all commands on command ring, and 2311 * rewind dequeue pointer. 2312 */ 2313 static void 2314 xhci_abort_command(struct xhci_softc *sc) 2315 { 2316 struct xhci_ring * const cr = &sc->sc_cr; 2317 uint64_t crcr; 2318 int i; 2319 2320 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2321 DPRINTFN(14, "command %#"PRIx64" timeout, aborting", 2322 sc->sc_command_addr, 0, 0, 0); 2323 2324 mutex_enter(&cr->xr_lock); 2325 2326 /* 4.6.1.2 Aborting a Command */ 2327 crcr = xhci_op_read_8(sc, XHCI_CRCR); 2328 xhci_op_write_8(sc, XHCI_CRCR, crcr | XHCI_CRCR_LO_CA); 2329 2330 for (i = 0; i < 500; i++) { 2331 crcr = xhci_op_read_8(sc, XHCI_CRCR); 2332 if ((crcr & XHCI_CRCR_LO_CRR) == 0) 2333 break; 2334 usb_delay_ms(&sc->sc_bus, 1); 2335 } 2336 if ((crcr & XHCI_CRCR_LO_CRR) != 0) { 2337 DPRINTFN(1, "Command Abort timeout", 0, 0, 0, 0); 2338 /* reset HC here? */ 2339 } 2340 2341 /* reset command ring dequeue pointer */ 2342 cr->xr_ep = 0; 2343 cr->xr_cs = 1; 2344 xhci_op_write_8(sc, XHCI_CRCR, xhci_ring_trbp(cr, 0) | cr->xr_cs); 2345 2346 mutex_exit(&cr->xr_lock); 2347 } 2348 2349 /* 2350 * Put a command on command ring, ring bell, set timer, and cv_timedwait. 2351 * Command completion is notified by cv_signal from xhci_event_cmd() 2352 * (called from xhci_softint), or timed-out. 2353 * The completion code is copied to sc->sc_result_trb in xhci_event_cmd(), 2354 * then do_command examines it. 2355 */ 2356 static usbd_status 2357 xhci_do_command_locked(struct xhci_softc * const sc, 2358 struct xhci_trb * const trb, int timeout) 2359 { 2360 struct xhci_ring * const cr = &sc->sc_cr; 2361 usbd_status err; 2362 2363 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2364 DPRINTFN(12, "input: 0x%016"PRIx64" 0x%08"PRIx32" 0x%08"PRIx32, 2365 trb->trb_0, trb->trb_2, trb->trb_3, 0); 2366 2367 KASSERTMSG(!cpu_intr_p() && !cpu_softintr_p(), "called from intr ctx"); 2368 KASSERT(mutex_owned(&sc->sc_lock)); 2369 2370 /* XXX KASSERT may fire when cv_timedwait unlocks sc_lock */ 2371 KASSERT(sc->sc_command_addr == 0); 2372 sc->sc_command_addr = xhci_ring_trbp(cr, cr->xr_ep); 2373 2374 mutex_enter(&cr->xr_lock); 2375 xhci_ring_put(sc, cr, NULL, trb, 1); 2376 mutex_exit(&cr->xr_lock); 2377 2378 xhci_db_write_4(sc, XHCI_DOORBELL(0), 0); 2379 2380 if (cv_timedwait(&sc->sc_command_cv, &sc->sc_lock, 2381 MAX(1, mstohz(timeout))) == EWOULDBLOCK) { 2382 xhci_abort_command(sc); 2383 err = USBD_TIMEOUT; 2384 goto timedout; 2385 } 2386 2387 trb->trb_0 = sc->sc_result_trb.trb_0; 2388 trb->trb_2 = sc->sc_result_trb.trb_2; 2389 trb->trb_3 = sc->sc_result_trb.trb_3; 2390 2391 DPRINTFN(12, "output: 0x%016"PRIx64" 0x%08"PRIx32" 0x%08"PRIx32"", 2392 trb->trb_0, trb->trb_2, trb->trb_3, 0); 2393 2394 switch (XHCI_TRB_2_ERROR_GET(trb->trb_2)) { 2395 case XHCI_TRB_ERROR_SUCCESS: 2396 err = USBD_NORMAL_COMPLETION; 2397 break; 2398 default: 2399 case 192 ... 223: 2400 err = USBD_IOERROR; 2401 break; 2402 case 224 ... 255: 2403 err = USBD_NORMAL_COMPLETION; 2404 break; 2405 } 2406 2407 timedout: 2408 sc->sc_command_addr = 0; 2409 return err; 2410 } 2411 2412 static usbd_status 2413 xhci_do_command(struct xhci_softc * const sc, struct xhci_trb * const trb, 2414 int timeout) 2415 { 2416 2417 mutex_enter(&sc->sc_lock); 2418 usbd_status ret = xhci_do_command_locked(sc, trb, timeout); 2419 mutex_exit(&sc->sc_lock); 2420 2421 return ret; 2422 } 2423 2424 static usbd_status 2425 xhci_enable_slot(struct xhci_softc * const sc, uint8_t * const slotp) 2426 { 2427 struct xhci_trb trb; 2428 usbd_status err; 2429 2430 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2431 2432 trb.trb_0 = 0; 2433 trb.trb_2 = 0; 2434 trb.trb_3 = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_ENABLE_SLOT); 2435 2436 err = xhci_do_command(sc, &trb, USBD_DEFAULT_TIMEOUT); 2437 if (err != USBD_NORMAL_COMPLETION) { 2438 return err; 2439 } 2440 2441 *slotp = XHCI_TRB_3_SLOT_GET(trb.trb_3); 2442 2443 return err; 2444 } 2445 2446 /* 2447 * xHCI 4.6.4 2448 * Deallocate ring and device/input context DMA buffers, and disable_slot. 2449 * All endpoints in the slot should be stopped. 2450 * Should be called with sc_lock held. 2451 */ 2452 static usbd_status 2453 xhci_disable_slot(struct xhci_softc * const sc, uint8_t slot) 2454 { 2455 struct xhci_trb trb; 2456 struct xhci_slot *xs; 2457 usbd_status err; 2458 2459 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2460 2461 if (sc->sc_dying) 2462 return USBD_IOERROR; 2463 2464 trb.trb_0 = 0; 2465 trb.trb_2 = 0; 2466 trb.trb_3 = htole32( 2467 XHCI_TRB_3_SLOT_SET(slot) | 2468 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_DISABLE_SLOT)); 2469 2470 err = xhci_do_command_locked(sc, &trb, USBD_DEFAULT_TIMEOUT); 2471 2472 if (!err) { 2473 xs = &sc->sc_slots[slot]; 2474 if (xs->xs_idx != 0) { 2475 xhci_free_slot(sc, xs, XHCI_DCI_SLOT + 1, 32); 2476 xhci_set_dcba(sc, 0, slot); 2477 memset(xs, 0, sizeof(*xs)); 2478 } 2479 } 2480 2481 return err; 2482 } 2483 2484 /* 2485 * Set address of device and transition slot state from ENABLED to ADDRESSED 2486 * if Block Setaddress Request (BSR) is false. 2487 * If BSR==true, transition slot state from ENABLED to DEFAULT. 2488 * see xHCI 1.1 4.5.3, 3.3.4 2489 * Should be called without sc_lock held. 2490 */ 2491 static usbd_status 2492 xhci_address_device(struct xhci_softc * const sc, 2493 uint64_t icp, uint8_t slot_id, bool bsr) 2494 { 2495 struct xhci_trb trb; 2496 usbd_status err; 2497 2498 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2499 2500 trb.trb_0 = icp; 2501 trb.trb_2 = 0; 2502 trb.trb_3 = XHCI_TRB_3_SLOT_SET(slot_id) | 2503 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_ADDRESS_DEVICE) | 2504 (bsr ? XHCI_TRB_3_BSR_BIT : 0); 2505 2506 err = xhci_do_command(sc, &trb, USBD_DEFAULT_TIMEOUT); 2507 2508 if (XHCI_TRB_2_ERROR_GET(trb.trb_2) == XHCI_TRB_ERROR_NO_SLOTS) 2509 err = USBD_NO_ADDR; 2510 2511 return err; 2512 } 2513 2514 static usbd_status 2515 xhci_update_ep0_mps(struct xhci_softc * const sc, 2516 struct xhci_slot * const xs, u_int mps) 2517 { 2518 struct xhci_trb trb; 2519 usbd_status err; 2520 uint32_t * cp; 2521 2522 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2523 DPRINTFN(4, "slot %u mps %u", xs->xs_idx, mps, 0, 0); 2524 2525 cp = xhci_slot_get_icv(sc, xs, XHCI_ICI_INPUT_CONTROL); 2526 cp[0] = htole32(0); 2527 cp[1] = htole32(XHCI_INCTX_1_ADD_MASK(XHCI_DCI_EP_CONTROL)); 2528 2529 cp = xhci_slot_get_icv(sc, xs, xhci_dci_to_ici(XHCI_DCI_EP_CONTROL)); 2530 cp[1] = htole32(XHCI_EPCTX_1_MAXP_SIZE_SET(mps)); 2531 2532 /* sync input contexts before they are read from memory */ 2533 usb_syncmem(&xs->xs_ic_dma, 0, sc->sc_pgsz, BUS_DMASYNC_PREWRITE); 2534 hexdump("input context", xhci_slot_get_icv(sc, xs, 0), 2535 sc->sc_ctxsz * 4); 2536 2537 trb.trb_0 = xhci_slot_get_icp(sc, xs, 0); 2538 trb.trb_2 = 0; 2539 trb.trb_3 = XHCI_TRB_3_SLOT_SET(xs->xs_idx) | 2540 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_EVALUATE_CTX); 2541 2542 err = xhci_do_command(sc, &trb, USBD_DEFAULT_TIMEOUT); 2543 KASSERTMSG(err == USBD_NORMAL_COMPLETION, "err %d", err); /* XXX */ 2544 return err; 2545 } 2546 2547 static void 2548 xhci_set_dcba(struct xhci_softc * const sc, uint64_t dcba, int si) 2549 { 2550 uint64_t * const dcbaa = KERNADDR(&sc->sc_dcbaa_dma, 0); 2551 2552 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2553 DPRINTFN(4, "dcbaa %p dc %016"PRIx64" slot %d", 2554 &dcbaa[si], dcba, si, 0); 2555 2556 dcbaa[si] = htole64(dcba); 2557 usb_syncmem(&sc->sc_dcbaa_dma, si * sizeof(uint64_t), sizeof(uint64_t), 2558 BUS_DMASYNC_PREWRITE); 2559 } 2560 2561 /* 2562 * Allocate device and input context DMA buffer, and 2563 * TRB DMA buffer for each endpoint. 2564 */ 2565 static usbd_status 2566 xhci_init_slot(struct usbd_device *dev, uint32_t slot) 2567 { 2568 struct xhci_softc * const sc = XHCI_BUS2SC(dev->ud_bus); 2569 struct xhci_slot *xs; 2570 usbd_status err; 2571 u_int dci; 2572 2573 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2574 DPRINTFN(4, "slot %u", slot, 0, 0, 0); 2575 2576 xs = &sc->sc_slots[slot]; 2577 2578 /* allocate contexts */ 2579 err = usb_allocmem(&sc->sc_bus, sc->sc_pgsz, sc->sc_pgsz, 2580 &xs->xs_dc_dma); 2581 if (err) 2582 return err; 2583 memset(KERNADDR(&xs->xs_dc_dma, 0), 0, sc->sc_pgsz); 2584 2585 err = usb_allocmem(&sc->sc_bus, sc->sc_pgsz, sc->sc_pgsz, 2586 &xs->xs_ic_dma); 2587 if (err) 2588 goto bad1; 2589 memset(KERNADDR(&xs->xs_ic_dma, 0), 0, sc->sc_pgsz); 2590 2591 for (dci = 0; dci < 32; dci++) { 2592 //CTASSERT(sizeof(xs->xs_ep[dci]) == sizeof(struct xhci_endpoint)); 2593 memset(&xs->xs_ep[dci], 0, sizeof(xs->xs_ep[dci])); 2594 if (dci == XHCI_DCI_SLOT) 2595 continue; 2596 err = xhci_ring_init(sc, &xs->xs_ep[dci].xe_tr, 2597 XHCI_TRANSFER_RING_TRBS, XHCI_TRB_ALIGN); 2598 if (err) { 2599 DPRINTFN(0, "ring init failure", 0, 0, 0, 0); 2600 goto bad2; 2601 } 2602 } 2603 2604 bad2: 2605 if (err == USBD_NORMAL_COMPLETION) { 2606 xs->xs_idx = slot; 2607 } else { 2608 xhci_free_slot(sc, xs, XHCI_DCI_SLOT + 1, dci); 2609 } 2610 2611 return err; 2612 2613 bad1: 2614 usb_freemem(&sc->sc_bus, &xs->xs_dc_dma); 2615 xs->xs_idx = 0; 2616 return err; 2617 } 2618 2619 static void 2620 xhci_free_slot(struct xhci_softc *sc, struct xhci_slot *xs, int start_dci, 2621 int end_dci) 2622 { 2623 u_int dci; 2624 2625 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2626 DPRINTFN(4, "slot %u start %u end %u", xs->xs_idx, start_dci, end_dci, 2627 0); 2628 2629 for (dci = start_dci; dci < end_dci; dci++) { 2630 xhci_ring_free(sc, &xs->xs_ep[dci].xe_tr); 2631 memset(&xs->xs_ep[dci], 0, sizeof(xs->xs_ep[dci])); 2632 } 2633 usb_freemem(&sc->sc_bus, &xs->xs_ic_dma); 2634 usb_freemem(&sc->sc_bus, &xs->xs_dc_dma); 2635 xs->xs_idx = 0; 2636 } 2637 2638 /* 2639 * Setup slot context, set Device Context Base Address, and issue 2640 * Set Address Device command. 2641 */ 2642 static usbd_status 2643 xhci_set_address(struct usbd_device *dev, uint32_t slot, bool bsr) 2644 { 2645 struct xhci_softc * const sc = XHCI_BUS2SC(dev->ud_bus); 2646 struct xhci_slot *xs; 2647 usbd_status err; 2648 2649 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2650 DPRINTFN(4, "slot %u bsr %u", slot, bsr, 0, 0); 2651 2652 xs = &sc->sc_slots[slot]; 2653 2654 xhci_setup_ctx(dev->ud_pipe0); 2655 2656 hexdump("input context", xhci_slot_get_icv(sc, xs, 0), 2657 sc->sc_ctxsz * 3); 2658 2659 xhci_set_dcba(sc, DMAADDR(&xs->xs_dc_dma, 0), slot); 2660 2661 err = xhci_address_device(sc, xhci_slot_get_icp(sc, xs, 0), slot, bsr); 2662 2663 usb_syncmem(&xs->xs_dc_dma, 0, sc->sc_pgsz, BUS_DMASYNC_POSTREAD); 2664 hexdump("output context", xhci_slot_get_dcv(sc, xs, 0), 2665 sc->sc_ctxsz * 2); 2666 2667 return err; 2668 } 2669 2670 /* 2671 * 4.8.2, 6.2.3.2 2672 * construct slot/endpoint context parameters and do syncmem 2673 */ 2674 static void 2675 xhci_setup_ctx(struct usbd_pipe *pipe) 2676 { 2677 struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); 2678 struct usbd_device *dev = pipe->up_dev; 2679 struct xhci_slot * const xs = dev->ud_hcpriv; 2680 usb_endpoint_descriptor_t * const ed = pipe->up_endpoint->ue_edesc; 2681 const u_int dci = xhci_ep_get_dci(ed); 2682 const uint8_t xfertype = UE_GET_XFERTYPE(ed->bmAttributes); 2683 uint32_t *cp; 2684 uint16_t mps = UGETW(ed->wMaxPacketSize); 2685 uint8_t speed = dev->ud_speed; 2686 uint8_t ival = ed->bInterval; 2687 2688 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2689 DPRINTFN(4, "pipe %p: slot %u dci %u speed %u", pipe, xs->xs_idx, dci, 2690 speed); 2691 2692 /* set up initial input control context */ 2693 cp = xhci_slot_get_icv(sc, xs, XHCI_ICI_INPUT_CONTROL); 2694 cp[0] = htole32(0); 2695 cp[1] = htole32(XHCI_INCTX_1_ADD_MASK(dci)); 2696 if (dci == XHCI_DCI_EP_CONTROL) 2697 cp[1] |= htole32(XHCI_INCTX_1_ADD_MASK(XHCI_DCI_SLOT)); 2698 cp[7] = htole32(0); 2699 2700 /* set up input slot context */ 2701 cp = xhci_slot_get_icv(sc, xs, xhci_dci_to_ici(XHCI_DCI_SLOT)); 2702 cp[0] = 2703 XHCI_SCTX_0_CTX_NUM_SET(dci) | 2704 XHCI_SCTX_0_SPEED_SET(xhci_speed2xspeed(speed)); 2705 cp[1] = 0; 2706 cp[2] = XHCI_SCTX_2_IRQ_TARGET_SET(0); 2707 cp[3] = 0; 2708 xhci_setup_route(pipe, cp); 2709 xhci_setup_tthub(pipe, cp); 2710 2711 cp[0] = htole32(cp[0]); 2712 cp[1] = htole32(cp[1]); 2713 cp[2] = htole32(cp[2]); 2714 cp[3] = htole32(cp[3]); 2715 2716 /* set up input endpoint context */ 2717 cp = xhci_slot_get_icv(sc, xs, xhci_dci_to_ici(dci)); 2718 cp[0] = 2719 XHCI_EPCTX_0_EPSTATE_SET(0) | 2720 XHCI_EPCTX_0_MULT_SET(0) | 2721 XHCI_EPCTX_0_MAXP_STREAMS_SET(0) | 2722 XHCI_EPCTX_0_LSA_SET(0) | 2723 XHCI_EPCTX_0_MAX_ESIT_PAYLOAD_HI_SET(0); 2724 cp[1] = 2725 XHCI_EPCTX_1_EPTYPE_SET(xhci_ep_get_type(ed)) | 2726 XHCI_EPCTX_1_HID_SET(0) | 2727 XHCI_EPCTX_1_MAXB_SET(0); 2728 2729 if (xfertype != UE_ISOCHRONOUS) 2730 cp[1] |= XHCI_EPCTX_1_CERR_SET(3); 2731 2732 if (xfertype == UE_CONTROL) 2733 cp[4] = XHCI_EPCTX_4_AVG_TRB_LEN_SET(8); /* 6.2.3 */ 2734 else if (USB_IS_SS(speed)) 2735 cp[4] = XHCI_EPCTX_4_AVG_TRB_LEN_SET(mps); 2736 else 2737 cp[4] = XHCI_EPCTX_4_AVG_TRB_LEN_SET(UE_GET_SIZE(mps)); 2738 2739 xhci_setup_maxburst(pipe, cp); 2740 2741 switch (xfertype) { 2742 case UE_CONTROL: 2743 break; 2744 case UE_BULK: 2745 /* XXX Set MaxPStreams, HID, and LSA if streams enabled */ 2746 break; 2747 case UE_INTERRUPT: 2748 if (pipe->up_interval != USBD_DEFAULT_INTERVAL) 2749 ival = pipe->up_interval; 2750 2751 ival = xhci_bival2ival(ival, speed); 2752 cp[0] |= XHCI_EPCTX_0_IVAL_SET(ival); 2753 break; 2754 case UE_ISOCHRONOUS: 2755 if (pipe->up_interval != USBD_DEFAULT_INTERVAL) 2756 ival = pipe->up_interval; 2757 2758 /* xHCI 6.2.3.6 Table 65, USB 2.0 9.6.6 */ 2759 if (speed == USB_SPEED_FULL) 2760 ival += 3; /* 1ms -> 125us */ 2761 ival--; 2762 cp[0] |= XHCI_EPCTX_0_IVAL_SET(ival); 2763 break; 2764 default: 2765 break; 2766 } 2767 DPRINTFN(4, "setting ival %u MaxBurst %#x", 2768 XHCI_EPCTX_0_IVAL_GET(cp[0]), XHCI_EPCTX_1_MAXB_GET(cp[1]), 0, 0); 2769 2770 /* rewind TR dequeue pointer in xHC */ 2771 /* can't use xhci_ep_get_dci() yet? */ 2772 *(uint64_t *)(&cp[2]) = htole64( 2773 xhci_ring_trbp(&xs->xs_ep[dci].xe_tr, 0) | 2774 XHCI_EPCTX_2_DCS_SET(1)); 2775 2776 cp[0] = htole32(cp[0]); 2777 cp[1] = htole32(cp[1]); 2778 cp[4] = htole32(cp[4]); 2779 2780 /* rewind TR dequeue pointer in driver */ 2781 struct xhci_ring *xr = &xs->xs_ep[dci].xe_tr; 2782 mutex_enter(&xr->xr_lock); 2783 xhci_host_dequeue(xr); 2784 mutex_exit(&xr->xr_lock); 2785 2786 /* sync input contexts before they are read from memory */ 2787 usb_syncmem(&xs->xs_ic_dma, 0, sc->sc_pgsz, BUS_DMASYNC_PREWRITE); 2788 } 2789 2790 /* 2791 * Setup route string and roothub port of given device for slot context 2792 */ 2793 static void 2794 xhci_setup_route(struct usbd_pipe *pipe, uint32_t *cp) 2795 { 2796 struct usbd_device *dev = pipe->up_dev; 2797 struct usbd_port *up = dev->ud_powersrc; 2798 struct usbd_device *hub; 2799 struct usbd_device *adev; 2800 uint8_t rhport = 0; 2801 uint32_t route = 0; 2802 2803 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2804 2805 /* Locate root hub port and Determine route string */ 2806 /* 4.3.3 route string does not include roothub port */ 2807 for (hub = dev; hub != NULL; hub = hub->ud_myhub) { 2808 uint32_t dep; 2809 2810 DPRINTFN(4, "hub %p depth %d upport %p upportno %d", 2811 hub, hub->ud_depth, hub->ud_powersrc, 2812 hub->ud_powersrc ? hub->ud_powersrc->up_portno : -1); 2813 2814 if (hub->ud_powersrc == NULL) 2815 break; 2816 dep = hub->ud_depth; 2817 if (dep == 0) 2818 break; 2819 rhport = hub->ud_powersrc->up_portno; 2820 if (dep > USB_HUB_MAX_DEPTH) 2821 continue; 2822 2823 route |= 2824 (rhport > UHD_SS_NPORTS_MAX ? UHD_SS_NPORTS_MAX : rhport) 2825 << ((dep - 1) * 4); 2826 } 2827 route = route >> 4; 2828 DPRINTFN(4, "rhport %u Route %05x hub %p", rhport, route, hub, 0); 2829 2830 /* Locate port on upstream high speed hub */ 2831 for (adev = dev, hub = up->up_parent; 2832 hub != NULL && hub->ud_speed != USB_SPEED_HIGH; 2833 adev = hub, hub = hub->ud_myhub) 2834 ; 2835 if (hub) { 2836 int p; 2837 for (p = 0; p < hub->ud_hub->uh_hubdesc.bNbrPorts; p++) { 2838 if (hub->ud_hub->uh_ports[p].up_dev == adev) { 2839 dev->ud_myhsport = &hub->ud_hub->uh_ports[p]; 2840 goto found; 2841 } 2842 } 2843 panic("xhci_setup_route: cannot find HS port"); 2844 found: 2845 DPRINTFN(4, "high speed port %d", p, 0, 0, 0); 2846 } else { 2847 dev->ud_myhsport = NULL; 2848 } 2849 2850 cp[0] |= XHCI_SCTX_0_ROUTE_SET(route); 2851 cp[1] |= XHCI_SCTX_1_RH_PORT_SET(rhport); 2852 } 2853 2854 /* 2855 * Setup whether device is hub, whether device uses MTT, and 2856 * TT informations if it uses MTT. 2857 */ 2858 static void 2859 xhci_setup_tthub(struct usbd_pipe *pipe, uint32_t *cp) 2860 { 2861 struct usbd_device *dev = pipe->up_dev; 2862 usb_device_descriptor_t * const dd = &dev->ud_ddesc; 2863 uint32_t speed = dev->ud_speed; 2864 uint8_t tthubslot, ttportnum; 2865 bool ishub; 2866 bool usemtt; 2867 2868 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2869 2870 /* 2871 * 6.2.2, Table 57-60, 6.2.2.1, 6.2.2.2 2872 * tthubslot: 2873 * This is the slot ID of parent HS hub 2874 * if LS/FS device is connected && connected through HS hub. 2875 * This is 0 if device is not LS/FS device || 2876 * parent hub is not HS hub || 2877 * attached to root hub. 2878 * ttportnum: 2879 * This is the downstream facing port of parent HS hub 2880 * if LS/FS device is connected. 2881 * This is 0 if device is not LS/FS device || 2882 * parent hub is not HS hub || 2883 * attached to root hub. 2884 */ 2885 if (dev->ud_myhsport != NULL && 2886 dev->ud_myhub != NULL && dev->ud_myhub->ud_depth != 0 && 2887 (dev->ud_myhub != NULL && 2888 dev->ud_myhub->ud_speed == USB_SPEED_HIGH) && 2889 (speed == USB_SPEED_LOW || speed == USB_SPEED_FULL)) { 2890 ttportnum = dev->ud_myhsport->up_portno; 2891 tthubslot = dev->ud_myhsport->up_parent->ud_addr; 2892 } else { 2893 ttportnum = 0; 2894 tthubslot = 0; 2895 } 2896 DPRINTFN(4, "myhsport %p ttportnum=%d tthubslot=%d", 2897 dev->ud_myhsport, ttportnum, tthubslot, 0); 2898 2899 /* ishub is valid after reading UDESC_DEVICE */ 2900 ishub = (dd->bDeviceClass == UDCLASS_HUB); 2901 2902 /* dev->ud_hub is valid after reading UDESC_HUB */ 2903 if (ishub && dev->ud_hub) { 2904 usb_hub_descriptor_t *hd = &dev->ud_hub->uh_hubdesc; 2905 uint8_t ttt = 2906 __SHIFTOUT(UGETW(hd->wHubCharacteristics), UHD_TT_THINK); 2907 2908 cp[1] |= XHCI_SCTX_1_NUM_PORTS_SET(hd->bNbrPorts); 2909 cp[2] |= XHCI_SCTX_2_TT_THINK_TIME_SET(ttt); 2910 DPRINTFN(4, "nports=%d ttt=%d", hd->bNbrPorts, ttt, 0, 0); 2911 } 2912 2913 #define IS_TTHUB(dd) \ 2914 ((dd)->bDeviceProtocol == UDPROTO_HSHUBSTT || \ 2915 (dd)->bDeviceProtocol == UDPROTO_HSHUBMTT) 2916 2917 /* 2918 * MTT flag is set if 2919 * 1. this is HS hub && MTT is enabled 2920 * or 2921 * 2. this is not hub && this is LS or FS device && 2922 * MTT of parent HS hub (and its parent, too) is enabled 2923 */ 2924 if (ishub && speed == USB_SPEED_HIGH && IS_TTHUB(dd)) 2925 usemtt = true; 2926 else if (!ishub && 2927 (speed == USB_SPEED_LOW || speed == USB_SPEED_FULL) && 2928 dev->ud_myhub != NULL && dev->ud_myhub->ud_depth != 0 && 2929 (dev->ud_myhub != NULL && 2930 dev->ud_myhub->ud_speed == USB_SPEED_HIGH) && 2931 dev->ud_myhsport != NULL && 2932 IS_TTHUB(&dev->ud_myhsport->up_parent->ud_ddesc)) 2933 usemtt = true; 2934 else 2935 usemtt = false; 2936 DPRINTFN(4, "class %u proto %u ishub %d usemtt %d", 2937 dd->bDeviceClass, dd->bDeviceProtocol, ishub, usemtt); 2938 2939 #undef IS_TTHUB 2940 2941 cp[0] |= 2942 XHCI_SCTX_0_HUB_SET(ishub ? 1 : 0) | 2943 XHCI_SCTX_0_MTT_SET(usemtt ? 1 : 0); 2944 cp[2] |= 2945 XHCI_SCTX_2_TT_HUB_SID_SET(tthubslot) | 2946 XHCI_SCTX_2_TT_PORT_NUM_SET(ttportnum); 2947 } 2948 2949 /* set up params for periodic endpoint */ 2950 static void 2951 xhci_setup_maxburst(struct usbd_pipe *pipe, uint32_t *cp) 2952 { 2953 struct usbd_device *dev = pipe->up_dev; 2954 usb_endpoint_descriptor_t * const ed = pipe->up_endpoint->ue_edesc; 2955 const uint8_t xfertype = UE_GET_XFERTYPE(ed->bmAttributes); 2956 usbd_desc_iter_t iter; 2957 const usb_cdc_descriptor_t *cdcd; 2958 uint32_t maxb = 0; 2959 uint16_t mps = UGETW(ed->wMaxPacketSize); 2960 uint8_t speed = dev->ud_speed; 2961 uint8_t ep; 2962 2963 /* config desc is NULL when opening ep0 */ 2964 if (dev == NULL || dev->ud_cdesc == NULL) 2965 goto no_cdcd; 2966 cdcd = (const usb_cdc_descriptor_t *)usb_find_desc(dev, 2967 UDESC_INTERFACE, USBD_CDCSUBTYPE_ANY); 2968 if (cdcd == NULL) 2969 goto no_cdcd; 2970 usb_desc_iter_init(dev, &iter); 2971 iter.cur = (const void *)cdcd; 2972 2973 /* find endpoint_ss_comp desc for ep of this pipe */ 2974 for (ep = 0;;) { 2975 cdcd = (const usb_cdc_descriptor_t *)usb_desc_iter_next(&iter); 2976 if (cdcd == NULL) 2977 break; 2978 if (ep == 0 && cdcd->bDescriptorType == UDESC_ENDPOINT) { 2979 ep = ((const usb_endpoint_descriptor_t *)cdcd)-> 2980 bEndpointAddress; 2981 if (UE_GET_ADDR(ep) == 2982 UE_GET_ADDR(ed->bEndpointAddress)) { 2983 cdcd = (const usb_cdc_descriptor_t *) 2984 usb_desc_iter_next(&iter); 2985 break; 2986 } 2987 ep = 0; 2988 } 2989 } 2990 if (cdcd != NULL && cdcd->bDescriptorType == UDESC_ENDPOINT_SS_COMP) { 2991 const usb_endpoint_ss_comp_descriptor_t * esscd = 2992 (const usb_endpoint_ss_comp_descriptor_t *)cdcd; 2993 maxb = esscd->bMaxBurst; 2994 } 2995 2996 no_cdcd: 2997 /* 6.2.3.4, 4.8.2.4 */ 2998 if (USB_IS_SS(speed)) { 2999 /* USB 3.1 9.6.6 */ 3000 cp[1] |= XHCI_EPCTX_1_MAXP_SIZE_SET(mps); 3001 /* USB 3.1 9.6.7 */ 3002 cp[1] |= XHCI_EPCTX_1_MAXB_SET(maxb); 3003 #ifdef notyet 3004 if (xfertype == UE_ISOCHRONOUS) { 3005 } 3006 if (XHCI_HCC2_LEC(sc->sc_hcc2) != 0) { 3007 /* use ESIT */ 3008 cp[4] |= XHCI_EPCTX_4_MAX_ESIT_PAYLOAD_SET(x); 3009 cp[0] |= XHCI_EPCTX_0_MAX_ESIT_PAYLOAD_HI_SET(x); 3010 3011 /* XXX if LEC = 1, set ESIT instead */ 3012 cp[0] |= XHCI_EPCTX_0_MULT_SET(0); 3013 } else { 3014 /* use ival */ 3015 } 3016 #endif 3017 } else { 3018 /* USB 2.0 9.6.6 */ 3019 cp[1] |= XHCI_EPCTX_1_MAXP_SIZE_SET(UE_GET_SIZE(mps)); 3020 3021 /* 6.2.3.4 */ 3022 if (speed == USB_SPEED_HIGH && 3023 (xfertype == UE_ISOCHRONOUS || xfertype == UE_INTERRUPT)) { 3024 maxb = UE_GET_TRANS(mps); 3025 } else { 3026 /* LS/FS or HS CTRL or HS BULK */ 3027 maxb = 0; 3028 } 3029 cp[1] |= XHCI_EPCTX_1_MAXB_SET(maxb); 3030 } 3031 } 3032 3033 /* 3034 * Convert endpoint bInterval value to endpoint context interval value 3035 * for Interrupt pipe. 3036 * xHCI 6.2.3.6 Table 65, USB 2.0 9.6.6 3037 */ 3038 static uint32_t 3039 xhci_bival2ival(uint32_t ival, uint32_t speed) 3040 { 3041 if (speed == USB_SPEED_LOW || speed == USB_SPEED_FULL) { 3042 int i; 3043 3044 /* 3045 * round ival down to "the nearest base 2 multiple of 3046 * bInterval * 8". 3047 * bInterval is at most 255 as its type is uByte. 3048 * 255(ms) = 2040(x 125us) < 2^11, so start with 10. 3049 */ 3050 for (i = 10; i > 0; i--) { 3051 if ((ival * 8) >= (1 << i)) 3052 break; 3053 } 3054 ival = i; 3055 } else { 3056 /* Interval = bInterval-1 for SS/HS */ 3057 ival--; 3058 } 3059 3060 return ival; 3061 } 3062 3063 /* ----- */ 3064 3065 static void 3066 xhci_noop(struct usbd_pipe *pipe) 3067 { 3068 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3069 } 3070 3071 /* 3072 * Process root hub request. 3073 */ 3074 static int 3075 xhci_roothub_ctrl(struct usbd_bus *bus, usb_device_request_t *req, 3076 void *buf, int buflen) 3077 { 3078 struct xhci_softc * const sc = XHCI_BUS2SC(bus); 3079 usb_port_status_t ps; 3080 int l, totlen = 0; 3081 uint16_t len, value, index; 3082 int port, i; 3083 uint32_t v; 3084 3085 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3086 3087 if (sc->sc_dying) 3088 return -1; 3089 3090 len = UGETW(req->wLength); 3091 value = UGETW(req->wValue); 3092 index = UGETW(req->wIndex); 3093 3094 DPRINTFN(12, "rhreq: %04x %04x %04x %04x", 3095 req->bmRequestType | (req->bRequest << 8), value, index, len); 3096 3097 #define C(x,y) ((x) | ((y) << 8)) 3098 switch (C(req->bRequest, req->bmRequestType)) { 3099 case C(UR_GET_DESCRIPTOR, UT_READ_DEVICE): 3100 DPRINTFN(8, "getdesc: wValue=0x%04x", value, 0, 0, 0); 3101 if (len == 0) 3102 break; 3103 switch (value) { 3104 case C(0, UDESC_DEVICE): { 3105 usb_device_descriptor_t devd; 3106 totlen = min(buflen, sizeof(devd)); 3107 memcpy(&devd, buf, totlen); 3108 USETW(devd.idVendor, sc->sc_id_vendor); 3109 memcpy(buf, &devd, totlen); 3110 break; 3111 } 3112 #define sd ((usb_string_descriptor_t *)buf) 3113 case C(1, UDESC_STRING): 3114 /* Vendor */ 3115 totlen = usb_makestrdesc(sd, len, sc->sc_vendor); 3116 break; 3117 case C(2, UDESC_STRING): 3118 /* Product */ 3119 totlen = usb_makestrdesc(sd, len, "xHCI Root Hub"); 3120 break; 3121 #undef sd 3122 default: 3123 /* default from usbroothub */ 3124 return buflen; 3125 } 3126 break; 3127 3128 /* Hub requests */ 3129 case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_DEVICE): 3130 break; 3131 /* Clear Port Feature request */ 3132 case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_OTHER): 3133 DPRINTFN(4, "UR_CLEAR_PORT_FEATURE port=%d feature=%d", 3134 index, value, 0, 0); 3135 if (index < 1 || index > sc->sc_maxports) { 3136 return -1; 3137 } 3138 port = XHCI_PORTSC(index); 3139 v = xhci_op_read_4(sc, port); 3140 DPRINTFN(4, "portsc=0x%08x", v, 0, 0, 0); 3141 v &= ~XHCI_PS_CLEAR; 3142 switch (value) { 3143 case UHF_PORT_ENABLE: 3144 xhci_op_write_4(sc, port, v & ~XHCI_PS_PED); 3145 break; 3146 case UHF_PORT_SUSPEND: 3147 return -1; 3148 case UHF_PORT_POWER: 3149 break; 3150 case UHF_PORT_TEST: 3151 case UHF_PORT_INDICATOR: 3152 return -1; 3153 case UHF_C_PORT_CONNECTION: 3154 xhci_op_write_4(sc, port, v | XHCI_PS_CSC); 3155 break; 3156 case UHF_C_PORT_ENABLE: 3157 case UHF_C_PORT_SUSPEND: 3158 case UHF_C_PORT_OVER_CURRENT: 3159 return -1; 3160 case UHF_C_BH_PORT_RESET: 3161 xhci_op_write_4(sc, port, v | XHCI_PS_WRC); 3162 break; 3163 case UHF_C_PORT_RESET: 3164 xhci_op_write_4(sc, port, v | XHCI_PS_PRC); 3165 break; 3166 case UHF_C_PORT_LINK_STATE: 3167 xhci_op_write_4(sc, port, v | XHCI_PS_PLC); 3168 break; 3169 case UHF_C_PORT_CONFIG_ERROR: 3170 xhci_op_write_4(sc, port, v | XHCI_PS_CEC); 3171 break; 3172 default: 3173 return -1; 3174 } 3175 break; 3176 case C(UR_GET_DESCRIPTOR, UT_READ_CLASS_DEVICE): 3177 if (len == 0) 3178 break; 3179 if ((value & 0xff) != 0) { 3180 return -1; 3181 } 3182 usb_hub_descriptor_t hubd; 3183 3184 totlen = min(buflen, sizeof(hubd)); 3185 memcpy(&hubd, buf, totlen); 3186 hubd.bNbrPorts = sc->sc_maxports; 3187 USETW(hubd.wHubCharacteristics, UHD_PWR_NO_SWITCH); 3188 hubd.bPwrOn2PwrGood = 200; 3189 for (i = 0, l = sc->sc_maxports; l > 0; i++, l -= 8) 3190 hubd.DeviceRemovable[i++] = 0; /* XXX can't find out? */ 3191 hubd.bDescLength = USB_HUB_DESCRIPTOR_SIZE + i; 3192 totlen = min(totlen, hubd.bDescLength); 3193 memcpy(buf, &hubd, totlen); 3194 break; 3195 case C(UR_GET_STATUS, UT_READ_CLASS_DEVICE): 3196 if (len != 4) { 3197 return -1; 3198 } 3199 memset(buf, 0, len); /* ? XXX */ 3200 totlen = len; 3201 break; 3202 /* Get Port Status request */ 3203 case C(UR_GET_STATUS, UT_READ_CLASS_OTHER): 3204 DPRINTFN(8, "get port status i=%d", index, 0, 0, 0); 3205 if (index < 1 || index > sc->sc_maxports) { 3206 return -1; 3207 } 3208 if (len != 4) { 3209 return -1; 3210 } 3211 v = xhci_op_read_4(sc, XHCI_PORTSC(index)); 3212 DPRINTFN(4, "getrhportsc %d %08x", index, v, 0, 0); 3213 i = xhci_xspeed2psspeed(XHCI_PS_SPEED_GET(v)); 3214 if (v & XHCI_PS_CCS) i |= UPS_CURRENT_CONNECT_STATUS; 3215 if (v & XHCI_PS_PED) i |= UPS_PORT_ENABLED; 3216 if (v & XHCI_PS_OCA) i |= UPS_OVERCURRENT_INDICATOR; 3217 //if (v & XHCI_PS_SUSP) i |= UPS_SUSPEND; 3218 if (v & XHCI_PS_PR) i |= UPS_RESET; 3219 if (v & XHCI_PS_PP) { 3220 if (i & UPS_OTHER_SPEED) 3221 i |= UPS_PORT_POWER_SS; 3222 else 3223 i |= UPS_PORT_POWER; 3224 } 3225 if (i & UPS_OTHER_SPEED) 3226 i |= UPS_PORT_LS_SET(XHCI_PS_PLS_GET(v)); 3227 if (sc->sc_vendor_port_status) 3228 i = sc->sc_vendor_port_status(sc, v, i); 3229 USETW(ps.wPortStatus, i); 3230 i = 0; 3231 if (v & XHCI_PS_CSC) i |= UPS_C_CONNECT_STATUS; 3232 if (v & XHCI_PS_PEC) i |= UPS_C_PORT_ENABLED; 3233 if (v & XHCI_PS_OCC) i |= UPS_C_OVERCURRENT_INDICATOR; 3234 if (v & XHCI_PS_PRC) i |= UPS_C_PORT_RESET; 3235 if (v & XHCI_PS_WRC) i |= UPS_C_BH_PORT_RESET; 3236 if (v & XHCI_PS_PLC) i |= UPS_C_PORT_LINK_STATE; 3237 if (v & XHCI_PS_CEC) i |= UPS_C_PORT_CONFIG_ERROR; 3238 USETW(ps.wPortChange, i); 3239 totlen = min(len, sizeof(ps)); 3240 memcpy(buf, &ps, totlen); 3241 break; 3242 case C(UR_SET_DESCRIPTOR, UT_WRITE_CLASS_DEVICE): 3243 return -1; 3244 case C(UR_SET_HUB_DEPTH, UT_WRITE_CLASS_DEVICE): 3245 break; 3246 case C(UR_SET_FEATURE, UT_WRITE_CLASS_DEVICE): 3247 break; 3248 /* Set Port Feature request */ 3249 case C(UR_SET_FEATURE, UT_WRITE_CLASS_OTHER): { 3250 int optval = (index >> 8) & 0xff; 3251 index &= 0xff; 3252 if (index < 1 || index > sc->sc_maxports) { 3253 return -1; 3254 } 3255 port = XHCI_PORTSC(index); 3256 v = xhci_op_read_4(sc, port); 3257 DPRINTFN(4, "portsc=0x%08x", v, 0, 0, 0); 3258 v &= ~XHCI_PS_CLEAR; 3259 switch (value) { 3260 case UHF_PORT_ENABLE: 3261 xhci_op_write_4(sc, port, v | XHCI_PS_PED); 3262 break; 3263 case UHF_PORT_SUSPEND: 3264 /* XXX suspend */ 3265 break; 3266 case UHF_PORT_RESET: 3267 v &= ~(XHCI_PS_PED | XHCI_PS_PR); 3268 xhci_op_write_4(sc, port, v | XHCI_PS_PR); 3269 /* Wait for reset to complete. */ 3270 usb_delay_ms(&sc->sc_bus, USB_PORT_ROOT_RESET_DELAY); 3271 if (sc->sc_dying) { 3272 return -1; 3273 } 3274 v = xhci_op_read_4(sc, port); 3275 if (v & XHCI_PS_PR) { 3276 xhci_op_write_4(sc, port, v & ~XHCI_PS_PR); 3277 usb_delay_ms(&sc->sc_bus, 10); 3278 /* XXX */ 3279 } 3280 break; 3281 case UHF_PORT_POWER: 3282 /* XXX power control */ 3283 break; 3284 /* XXX more */ 3285 case UHF_C_PORT_RESET: 3286 xhci_op_write_4(sc, port, v | XHCI_PS_PRC); 3287 break; 3288 case UHF_PORT_U1_TIMEOUT: 3289 if (XHCI_PS_SPEED_GET(v) < XHCI_PS_SPEED_SS) { 3290 return -1; 3291 } 3292 port = XHCI_PORTPMSC(index); 3293 v = xhci_op_read_4(sc, port); 3294 v &= ~XHCI_PM3_U1TO_SET(0xff); 3295 v |= XHCI_PM3_U1TO_SET(optval); 3296 xhci_op_write_4(sc, port, v); 3297 break; 3298 case UHF_PORT_U2_TIMEOUT: 3299 if (XHCI_PS_SPEED_GET(v) < XHCI_PS_SPEED_SS) { 3300 return -1; 3301 } 3302 port = XHCI_PORTPMSC(index); 3303 v = xhci_op_read_4(sc, port); 3304 v &= ~XHCI_PM3_U2TO_SET(0xff); 3305 v |= XHCI_PM3_U2TO_SET(optval); 3306 xhci_op_write_4(sc, port, v); 3307 break; 3308 default: 3309 return -1; 3310 } 3311 } 3312 break; 3313 case C(UR_CLEAR_TT_BUFFER, UT_WRITE_CLASS_OTHER): 3314 case C(UR_RESET_TT, UT_WRITE_CLASS_OTHER): 3315 case C(UR_GET_TT_STATE, UT_READ_CLASS_OTHER): 3316 case C(UR_STOP_TT, UT_WRITE_CLASS_OTHER): 3317 break; 3318 default: 3319 /* default from usbroothub */ 3320 return buflen; 3321 } 3322 3323 return totlen; 3324 } 3325 3326 /* root hub interrupt */ 3327 3328 static usbd_status 3329 xhci_root_intr_transfer(struct usbd_xfer *xfer) 3330 { 3331 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 3332 usbd_status err; 3333 3334 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3335 3336 /* Insert last in queue. */ 3337 mutex_enter(&sc->sc_lock); 3338 err = usb_insert_transfer(xfer); 3339 mutex_exit(&sc->sc_lock); 3340 if (err) 3341 return err; 3342 3343 /* Pipe isn't running, start first */ 3344 return xhci_root_intr_start(SIMPLEQ_FIRST(&xfer->ux_pipe->up_queue)); 3345 } 3346 3347 /* Wait for roothub port status/change */ 3348 static usbd_status 3349 xhci_root_intr_start(struct usbd_xfer *xfer) 3350 { 3351 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 3352 3353 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3354 3355 if (sc->sc_dying) 3356 return USBD_IOERROR; 3357 3358 mutex_enter(&sc->sc_lock); 3359 sc->sc_intrxfer = xfer; 3360 mutex_exit(&sc->sc_lock); 3361 3362 return USBD_IN_PROGRESS; 3363 } 3364 3365 static void 3366 xhci_root_intr_abort(struct usbd_xfer *xfer) 3367 { 3368 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 3369 3370 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3371 3372 KASSERT(mutex_owned(&sc->sc_lock)); 3373 KASSERT(xfer->ux_pipe->up_intrxfer == xfer); 3374 3375 sc->sc_intrxfer = NULL; 3376 3377 xfer->ux_status = USBD_CANCELLED; 3378 usb_transfer_complete(xfer); 3379 } 3380 3381 static void 3382 xhci_root_intr_close(struct usbd_pipe *pipe) 3383 { 3384 struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); 3385 3386 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3387 3388 KASSERT(mutex_owned(&sc->sc_lock)); 3389 3390 sc->sc_intrxfer = NULL; 3391 } 3392 3393 static void 3394 xhci_root_intr_done(struct usbd_xfer *xfer) 3395 { 3396 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3397 3398 } 3399 3400 /* -------------- */ 3401 /* device control */ 3402 3403 static usbd_status 3404 xhci_device_ctrl_transfer(struct usbd_xfer *xfer) 3405 { 3406 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 3407 usbd_status err; 3408 3409 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3410 3411 /* Insert last in queue. */ 3412 mutex_enter(&sc->sc_lock); 3413 err = usb_insert_transfer(xfer); 3414 mutex_exit(&sc->sc_lock); 3415 if (err) 3416 return err; 3417 3418 /* Pipe isn't running, start first */ 3419 return xhci_device_ctrl_start(SIMPLEQ_FIRST(&xfer->ux_pipe->up_queue)); 3420 } 3421 3422 static usbd_status 3423 xhci_device_ctrl_start(struct usbd_xfer *xfer) 3424 { 3425 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 3426 struct xhci_slot * const xs = xfer->ux_pipe->up_dev->ud_hcpriv; 3427 const u_int dci = xhci_ep_get_dci(xfer->ux_pipe->up_endpoint->ue_edesc); 3428 struct xhci_ring * const tr = &xs->xs_ep[dci].xe_tr; 3429 struct xhci_xfer * const xx = XHCI_XFER2XXFER(xfer); 3430 usb_device_request_t * const req = &xfer->ux_request; 3431 const int isread = usbd_xfer_isread(xfer); 3432 const uint32_t len = UGETW(req->wLength); 3433 usb_dma_t * const dma = &xfer->ux_dmabuf; 3434 uint64_t parameter; 3435 uint32_t status; 3436 uint32_t control; 3437 u_int i; 3438 3439 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3440 DPRINTFN(12, "req: %04x %04x %04x %04x", 3441 req->bmRequestType | (req->bRequest << 8), UGETW(req->wValue), 3442 UGETW(req->wIndex), UGETW(req->wLength)); 3443 3444 /* we rely on the bottom bits for extra info */ 3445 KASSERTMSG(((uintptr_t)xfer & 0x3) == 0x0, "xfer %zx", 3446 (uintptr_t) xfer); 3447 3448 KASSERT((xfer->ux_rqflags & URQ_REQUEST) != 0); 3449 3450 i = 0; 3451 3452 /* setup phase */ 3453 memcpy(¶meter, req, sizeof(*req)); 3454 status = XHCI_TRB_2_IRQ_SET(0) | XHCI_TRB_2_BYTES_SET(sizeof(*req)); 3455 control = ((len == 0) ? XHCI_TRB_3_TRT_NONE : 3456 (isread ? XHCI_TRB_3_TRT_IN : XHCI_TRB_3_TRT_OUT)) | 3457 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_SETUP_STAGE) | 3458 XHCI_TRB_3_IDT_BIT; 3459 xhci_trb_put(&xx->xx_trb[i++], parameter, status, control); 3460 3461 if (len != 0) { 3462 /* data phase */ 3463 parameter = DMAADDR(dma, 0); 3464 KASSERTMSG(len <= 0x10000, "len %d", len); 3465 status = XHCI_TRB_2_IRQ_SET(0) | 3466 XHCI_TRB_2_TDSZ_SET(1) | 3467 XHCI_TRB_2_BYTES_SET(len); 3468 control = (isread ? XHCI_TRB_3_DIR_IN : 0) | 3469 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_DATA_STAGE) | 3470 XHCI_TRB_3_CHAIN_BIT | XHCI_TRB_3_ENT_BIT; 3471 xhci_trb_put(&xx->xx_trb[i++], parameter, status, control); 3472 3473 parameter = (uintptr_t)xfer | 0x3; 3474 status = XHCI_TRB_2_IRQ_SET(0); 3475 control = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_EVENT_DATA) | 3476 XHCI_TRB_3_IOC_BIT; 3477 xhci_trb_put(&xx->xx_trb[i++], parameter, status, control); 3478 } 3479 3480 parameter = 0; 3481 status = XHCI_TRB_2_IRQ_SET(0); 3482 /* the status stage has inverted direction */ 3483 control = ((isread && (len > 0)) ? 0 : XHCI_TRB_3_DIR_IN) | 3484 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_STATUS_STAGE) | 3485 XHCI_TRB_3_CHAIN_BIT | XHCI_TRB_3_ENT_BIT; 3486 xhci_trb_put(&xx->xx_trb[i++], parameter, status, control); 3487 3488 parameter = (uintptr_t)xfer | 0x0; 3489 status = XHCI_TRB_2_IRQ_SET(0); 3490 control = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_EVENT_DATA) | 3491 XHCI_TRB_3_IOC_BIT; 3492 xhci_trb_put(&xx->xx_trb[i++], parameter, status, control); 3493 3494 mutex_enter(&tr->xr_lock); 3495 xhci_ring_put(sc, tr, xfer, xx->xx_trb, i); 3496 mutex_exit(&tr->xr_lock); 3497 3498 xhci_db_write_4(sc, XHCI_DOORBELL(xs->xs_idx), dci); 3499 3500 if (xfer->ux_timeout && !sc->sc_bus.ub_usepolling) { 3501 callout_reset(&xfer->ux_callout, mstohz(xfer->ux_timeout), 3502 xhci_timeout, xfer); 3503 } 3504 3505 return USBD_IN_PROGRESS; 3506 } 3507 3508 static void 3509 xhci_device_ctrl_done(struct usbd_xfer *xfer) 3510 { 3511 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3512 usb_device_request_t *req = &xfer->ux_request; 3513 int len = UGETW(req->wLength); 3514 int rd = req->bmRequestType & UT_READ; 3515 3516 if (len) 3517 usb_syncmem(&xfer->ux_dmabuf, 0, len, 3518 rd ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); 3519 } 3520 3521 static void 3522 xhci_device_ctrl_abort(struct usbd_xfer *xfer) 3523 { 3524 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3525 3526 xhci_abort_xfer(xfer, USBD_CANCELLED); 3527 } 3528 3529 static void 3530 xhci_device_ctrl_close(struct usbd_pipe *pipe) 3531 { 3532 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3533 3534 xhci_close_pipe(pipe); 3535 } 3536 3537 /* ------------------ */ 3538 /* device isochronous */ 3539 3540 /* ----------- */ 3541 /* device bulk */ 3542 3543 static usbd_status 3544 xhci_device_bulk_transfer(struct usbd_xfer *xfer) 3545 { 3546 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 3547 usbd_status err; 3548 3549 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3550 3551 /* Insert last in queue. */ 3552 mutex_enter(&sc->sc_lock); 3553 err = usb_insert_transfer(xfer); 3554 mutex_exit(&sc->sc_lock); 3555 if (err) 3556 return err; 3557 3558 /* 3559 * Pipe isn't running (otherwise err would be USBD_INPROG), 3560 * so start it first. 3561 */ 3562 return xhci_device_bulk_start(SIMPLEQ_FIRST(&xfer->ux_pipe->up_queue)); 3563 } 3564 3565 static usbd_status 3566 xhci_device_bulk_start(struct usbd_xfer *xfer) 3567 { 3568 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 3569 struct xhci_slot * const xs = xfer->ux_pipe->up_dev->ud_hcpriv; 3570 const u_int dci = xhci_ep_get_dci(xfer->ux_pipe->up_endpoint->ue_edesc); 3571 struct xhci_ring * const tr = &xs->xs_ep[dci].xe_tr; 3572 struct xhci_xfer * const xx = XHCI_XFER2XXFER(xfer); 3573 const uint32_t len = xfer->ux_length; 3574 usb_dma_t * const dma = &xfer->ux_dmabuf; 3575 uint64_t parameter; 3576 uint32_t status; 3577 uint32_t control; 3578 u_int i = 0; 3579 3580 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3581 3582 DPRINTFN(15, "%p slot %u dci %u", xfer, xs->xs_idx, dci, 0); 3583 3584 if (sc->sc_dying) 3585 return USBD_IOERROR; 3586 3587 KASSERT((xfer->ux_rqflags & URQ_REQUEST) == 0); 3588 3589 parameter = DMAADDR(dma, 0); 3590 /* 3591 * XXX: (dsl) The physical buffer must not cross a 64k boundary. 3592 * If the user supplied buffer crosses such a boundary then 2 3593 * (or more) TRB should be used. 3594 * If multiple TRB are used the td_size field must be set correctly. 3595 * For v1.0 devices (like ivy bridge) this is the number of usb data 3596 * blocks needed to complete the transfer. 3597 * Setting it to 1 in the last TRB causes an extra zero-length 3598 * data block be sent. 3599 * The earlier documentation differs, I don't know how it behaves. 3600 */ 3601 KASSERTMSG(len <= 0x10000, "len %d", len); 3602 status = XHCI_TRB_2_IRQ_SET(0) | 3603 XHCI_TRB_2_TDSZ_SET(1) | 3604 XHCI_TRB_2_BYTES_SET(len); 3605 control = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_NORMAL) | 3606 XHCI_TRB_3_ISP_BIT | XHCI_TRB_3_IOC_BIT; 3607 xhci_trb_put(&xx->xx_trb[i++], parameter, status, control); 3608 3609 mutex_enter(&tr->xr_lock); 3610 xhci_ring_put(sc, tr, xfer, xx->xx_trb, i); 3611 mutex_exit(&tr->xr_lock); 3612 3613 xhci_db_write_4(sc, XHCI_DOORBELL(xs->xs_idx), dci); 3614 3615 if (xfer->ux_timeout && !sc->sc_bus.ub_usepolling) { 3616 callout_reset(&xfer->ux_callout, mstohz(xfer->ux_timeout), 3617 xhci_timeout, xfer); 3618 } 3619 3620 return USBD_IN_PROGRESS; 3621 } 3622 3623 static void 3624 xhci_device_bulk_done(struct usbd_xfer *xfer) 3625 { 3626 #ifdef USB_DEBUG 3627 struct xhci_slot * const xs = xfer->ux_pipe->up_dev->ud_hcpriv; 3628 const u_int dci = xhci_ep_get_dci(xfer->ux_pipe->up_endpoint->ue_edesc); 3629 #endif 3630 const int isread = usbd_xfer_isread(xfer); 3631 3632 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3633 3634 DPRINTFN(15, "%p slot %u dci %u", xfer, xs->xs_idx, dci, 0); 3635 3636 usb_syncmem(&xfer->ux_dmabuf, 0, xfer->ux_length, 3637 isread ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); 3638 } 3639 3640 static void 3641 xhci_device_bulk_abort(struct usbd_xfer *xfer) 3642 { 3643 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3644 3645 xhci_abort_xfer(xfer, USBD_CANCELLED); 3646 } 3647 3648 static void 3649 xhci_device_bulk_close(struct usbd_pipe *pipe) 3650 { 3651 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3652 3653 xhci_close_pipe(pipe); 3654 } 3655 3656 /* ---------------- */ 3657 /* device interrupt */ 3658 3659 static usbd_status 3660 xhci_device_intr_transfer(struct usbd_xfer *xfer) 3661 { 3662 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 3663 usbd_status err; 3664 3665 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3666 3667 /* Insert last in queue. */ 3668 mutex_enter(&sc->sc_lock); 3669 err = usb_insert_transfer(xfer); 3670 mutex_exit(&sc->sc_lock); 3671 if (err) 3672 return err; 3673 3674 /* 3675 * Pipe isn't running (otherwise err would be USBD_INPROG), 3676 * so start it first. 3677 */ 3678 return xhci_device_intr_start(SIMPLEQ_FIRST(&xfer->ux_pipe->up_queue)); 3679 } 3680 3681 static usbd_status 3682 xhci_device_intr_start(struct usbd_xfer *xfer) 3683 { 3684 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 3685 struct xhci_slot * const xs = xfer->ux_pipe->up_dev->ud_hcpriv; 3686 const u_int dci = xhci_ep_get_dci(xfer->ux_pipe->up_endpoint->ue_edesc); 3687 struct xhci_ring * const tr = &xs->xs_ep[dci].xe_tr; 3688 struct xhci_xfer * const xx = XHCI_XFER2XXFER(xfer); 3689 const uint32_t len = xfer->ux_length; 3690 usb_dma_t * const dma = &xfer->ux_dmabuf; 3691 uint64_t parameter; 3692 uint32_t status; 3693 uint32_t control; 3694 u_int i = 0; 3695 3696 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3697 3698 DPRINTFN(15, "%p slot %u dci %u", xfer, xs->xs_idx, dci, 0); 3699 3700 if (sc->sc_dying) 3701 return USBD_IOERROR; 3702 3703 KASSERT((xfer->ux_rqflags & URQ_REQUEST) == 0); 3704 3705 parameter = DMAADDR(dma, 0); 3706 KASSERTMSG(len <= 0x10000, "len %d", len); 3707 status = XHCI_TRB_2_IRQ_SET(0) | 3708 XHCI_TRB_2_TDSZ_SET(1) | 3709 XHCI_TRB_2_BYTES_SET(len); 3710 control = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_NORMAL) | 3711 XHCI_TRB_3_ISP_BIT | XHCI_TRB_3_IOC_BIT; 3712 xhci_trb_put(&xx->xx_trb[i++], parameter, status, control); 3713 3714 mutex_enter(&tr->xr_lock); 3715 xhci_ring_put(sc, tr, xfer, xx->xx_trb, i); 3716 mutex_exit(&tr->xr_lock); 3717 3718 xhci_db_write_4(sc, XHCI_DOORBELL(xs->xs_idx), dci); 3719 3720 if (xfer->ux_timeout && !sc->sc_bus.ub_usepolling) { 3721 callout_reset(&xfer->ux_callout, mstohz(xfer->ux_timeout), 3722 xhci_timeout, xfer); 3723 } 3724 3725 return USBD_IN_PROGRESS; 3726 } 3727 3728 static void 3729 xhci_device_intr_done(struct usbd_xfer *xfer) 3730 { 3731 struct xhci_softc * const sc __diagused = XHCI_XFER2SC(xfer); 3732 #ifdef USB_DEBUG 3733 struct xhci_slot * const xs = xfer->ux_pipe->up_dev->ud_hcpriv; 3734 const u_int dci = xhci_ep_get_dci(xfer->ux_pipe->up_endpoint->ue_edesc); 3735 #endif 3736 const int isread = usbd_xfer_isread(xfer); 3737 3738 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3739 3740 DPRINTFN(15, "%p slot %u dci %u", xfer, xs->xs_idx, dci, 0); 3741 3742 KASSERT(sc->sc_bus.ub_usepolling || mutex_owned(&sc->sc_lock)); 3743 3744 usb_syncmem(&xfer->ux_dmabuf, 0, xfer->ux_length, 3745 isread ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); 3746 } 3747 3748 static void 3749 xhci_device_intr_abort(struct usbd_xfer *xfer) 3750 { 3751 struct xhci_softc * const sc __diagused = XHCI_XFER2SC(xfer); 3752 3753 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3754 3755 KASSERT(mutex_owned(&sc->sc_lock)); 3756 DPRINTFN(15, "%p", xfer, 0, 0, 0); 3757 KASSERT(xfer->ux_pipe->up_intrxfer == xfer); 3758 xhci_abort_xfer(xfer, USBD_CANCELLED); 3759 } 3760 3761 static void 3762 xhci_device_intr_close(struct usbd_pipe *pipe) 3763 { 3764 //struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); 3765 3766 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3767 DPRINTFN(15, "%p", pipe, 0, 0, 0); 3768 3769 xhci_close_pipe(pipe); 3770 } 3771 3772 /* ------------ */ 3773 3774 static void 3775 xhci_timeout(void *addr) 3776 { 3777 struct xhci_xfer * const xx = addr; 3778 struct usbd_xfer * const xfer = &xx->xx_xfer; 3779 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 3780 3781 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3782 3783 if (sc->sc_dying) { 3784 return; 3785 } 3786 3787 usb_init_task(&xx->xx_abort_task, xhci_timeout_task, addr, 3788 USB_TASKQ_MPSAFE); 3789 usb_add_task(xx->xx_xfer.ux_pipe->up_dev, &xx->xx_abort_task, 3790 USB_TASKQ_HC); 3791 } 3792 3793 static void 3794 xhci_timeout_task(void *addr) 3795 { 3796 struct usbd_xfer * const xfer = addr; 3797 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 3798 3799 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3800 3801 mutex_enter(&sc->sc_lock); 3802 #if 0 3803 xhci_abort_xfer(xfer, USBD_TIMEOUT); 3804 #else 3805 xfer->ux_status = USBD_TIMEOUT; 3806 usb_transfer_complete(xfer); 3807 #endif 3808 mutex_exit(&sc->sc_lock); 3809 } 3810
Indexes created Mon Sep 29 15:09:53 GMT 2025