Home | History | Annotate | Line # | Download | only in common
ahpredef.c revision 1.1.1.2
      1 /******************************************************************************
      2  *
      3  * Module Name: ahpredef - Table of all known ACPI predefined names
      4  *
      5  *****************************************************************************/
      6 
      7 /*
      8  * Copyright (C) 2000 - 2014, Intel Corp.
      9  * All rights reserved.
     10  *
     11  * Redistribution and use in source and binary forms, with or without
     12  * modification, are permitted provided that the following conditions
     13  * are met:
     14  * 1. Redistributions of source code must retain the above copyright
     15  *    notice, this list of conditions, and the following disclaimer,
     16  *    without modification.
     17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
     18  *    substantially similar to the "NO WARRANTY" disclaimer below
     19  *    ("Disclaimer") and any redistribution must be conditioned upon
     20  *    including a substantially similar Disclaimer requirement for further
     21  *    binary redistribution.
     22  * 3. Neither the names of the above-listed copyright holders nor the names
     23  *    of any contributors may be used to endorse or promote products derived
     24  *    from this software without specific prior written permission.
     25  *
     26  * Alternatively, this software may be distributed under the terms of the
     27  * GNU General Public License ("GPL") version 2 as published by the Free
     28  * Software Foundation.
     29  *
     30  * NO WARRANTY
     31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
     34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
     35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
     39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
     40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     41  * POSSIBILITY OF SUCH DAMAGES.
     42  */
     43 
     44 #include "acpi.h"
     45 #include "accommon.h"
     46 
     47 #define _COMPONENT          ACPI_UTILITIES
     48         ACPI_MODULE_NAME    ("ahpredef")
     49 
     50 /*
     51  * iASL only needs a partial table (short descriptions only).
     52  * AcpiHelp needs the full table.
     53  */
     54 #ifdef ACPI_ASL_COMPILER
     55 #define AH_PREDEF(Name, ShortDesc, LongDesc) {Name, ShortDesc}
     56 #else
     57 #define AH_PREDEF(Name, ShortDesc, LongDesc) {Name, ShortDesc, LongDesc}
     58 #endif
     59 
     60 /*
     61  * Predefined ACPI names, with short description and return value.
     62  * This table was extracted directly from the ACPI specification.
     63  */
     64 const AH_PREDEFINED_NAME    AslPredefinedInfo[] =
     65 {
     66     AH_PREDEF ("_ACx",    "Active Cooling", "Returns the active cooling policy threshold values"),
     67     AH_PREDEF ("_ADR",    "Address", "Returns address of a device on parent bus, and resource field"),
     68     AH_PREDEF ("_AEI",    "ACPI Event Interrupts", "Returns a list of GPIO events to be used as ACPI events"),
     69     AH_PREDEF ("_ALC",    "Ambient Light Chromaticity", "Returns the ambient light color chromaticity"),
     70     AH_PREDEF ("_ALI",    "Ambient Light Illuminance", "Returns the ambient light brightness"),
     71     AH_PREDEF ("_ALN",    "Alignment", "Base alignment, Resource Descriptor field"),
     72     AH_PREDEF ("_ALP",    "Ambient Light Polling", "Returns the ambient light sensor polling frequency"),
     73     AH_PREDEF ("_ALR",    "Ambient Light Response", "Returns the ambient light brightness to display brightness mappings"),
     74     AH_PREDEF ("_ALT",    "Ambient Light Temperature", "Returns the ambient light color temperature"),
     75     AH_PREDEF ("_ALx",    "Active List", "Returns a list of active cooling device objects"),
     76     AH_PREDEF ("_ART",    "Active Cooling Relationship Table", "Returns thermal relationship information between platform devices and fan devices"),
     77     AH_PREDEF ("_ASI",    "Address Space Id", "Resource Descriptor field"),
     78     AH_PREDEF ("_ASZ",    "Access Size", "Resource Descriptor field"),
     79     AH_PREDEF ("_ATT",    "Type-Specific Attribute", "Resource Descriptor field"),
     80     AH_PREDEF ("_BAS",    "Base Address", "Range base address, Resource Descriptor field"),
     81     AH_PREDEF ("_BBN",    "BIOS Bus Number", "Returns the PCI bus number returned by the BIOS"),
     82     AH_PREDEF ("_BCL",    "Brightness Control Levels", "Returns a list of supported brightness control levels"),
     83     AH_PREDEF ("_BCM",    "Brightness Control Method", "Sets the brightness level of the display device"),
     84     AH_PREDEF ("_BCT",    "Battery Charge Time", "Returns time remaining to complete charging battery"),
     85     AH_PREDEF ("_BDN",    "BIOS Dock Name", "Returns the Dock ID returned by the BIOS"),
     86     AH_PREDEF ("_BFS",    "Back From Sleep", "Inform AML of a wake event"),
     87     AH_PREDEF ("_BIF",    "Battery Information", "Returns a Control Method Battery information block"),
     88     AH_PREDEF ("_BIX",    "Battery Information Extended", "Returns a Control Method Battery extended information block"),
     89     AH_PREDEF ("_BLT",    "Battery Level Threshold", "Set battery level threshold preferences"),
     90     AH_PREDEF ("_BM_",    "Bus Master", "Resource Descriptor field"),
     91     AH_PREDEF ("_BMA",    "Battery Measurement Averaging Interval", "Sets battery measurement averaging interval"),
     92     AH_PREDEF ("_BMC",    "Battery Maintenance Control", "Sets battery maintenance and control features"),
     93     AH_PREDEF ("_BMD",    "Battery Maintenance Data", "Returns battery maintenance, control, and state data"),
     94     AH_PREDEF ("_BMS",    "Battery Measurement Sampling Time", "Sets the battery measurement sampling time"),
     95     AH_PREDEF ("_BQC",    "Brightness Query Current", "Returns the current display brightness level"),
     96     AH_PREDEF ("_BST",    "Battery Status", "Returns a Control Method Battery status block"),
     97     AH_PREDEF ("_BTM",    "Battery Time", "Returns the battery runtime"),
     98     AH_PREDEF ("_BTP",    "Battery Trip Point", "Sets a Control Method Battery trip point"),
     99     AH_PREDEF ("_CBA",    "Configuration Base Address", "Sets the base address for a PCI Express host bridge"),
    100     AH_PREDEF ("_CCA",    "Cache Coherency Attribute", "Returns a device's support level for cache coherency"),
    101     AH_PREDEF ("_CDM",    "Clock Domain", "Returns a logical processor's clock domain identifier"),
    102     AH_PREDEF ("_CID",    "Compatible ID", "Returns a device's Plug and Play Compatible ID list"),
    103     AH_PREDEF ("_CLS",    "Class Code", "Returns PCI class code and subclass"),
    104     AH_PREDEF ("_CPC",    "Continuous Performance Control", "Returns a list of performance control interfaces"),
    105     AH_PREDEF ("_CRS",    "Current Resource Settings", "Returns the current resource settings for a device"),
    106     AH_PREDEF ("_CRT",    "Critical Temperature", "Returns the shutdown critical temperature"),
    107     AH_PREDEF ("_CSD",    "C-State Dependencies", "Returns a list of C-state dependencies"),
    108     AH_PREDEF ("_CST",    "C-States", "Returns a list of supported C-states"),
    109     AH_PREDEF ("_CWS",    "Clear Wake Alarm Status", "Clear the status of wake alarms"),
    110     AH_PREDEF ("_DBT",    "Debounce Timeout", "Timeout value, Resource Descriptor field"),
    111     AH_PREDEF ("_DCK",    "Dock Present", "Sets docking isolation. Presence indicates device is a docking station"),
    112     AH_PREDEF ("_DCS",    "Display Current Status", "Returns status of the display output device"),
    113     AH_PREDEF ("_DDC",    "Display Data Current", "Returns the EDID for the display output device"),
    114     AH_PREDEF ("_DDN",    "DOS Device Name", "Returns a device logical name"),
    115     AH_PREDEF ("_DEC",    "Decode", "Device decoding type, Resource Descriptor field"),
    116     AH_PREDEF ("_DEP",    "Dependencies", "Returns a list of operation region dependencies"),
    117     AH_PREDEF ("_DGS",    "Display Graphics State", "Return the current state of the output device"),
    118     AH_PREDEF ("_DIS",    "Disable Device", "Disables a device"),
    119     AH_PREDEF ("_DLM",    "Device Lock Mutex", "Defines mutex for OS/AML sharing"),
    120     AH_PREDEF ("_DMA",    "Direct Memory Access", "Returns device current resources for DMA transactions, and resource field"),
    121     AH_PREDEF ("_DOD",    "Display Output Devices", "Enumerate all devices attached to the display adapter"),
    122     AH_PREDEF ("_DOS",    "Disable Output Switching", "Sets the display output switching mode"),
    123     AH_PREDEF ("_DPL",    "Device Selection Polarity", "Polarity of Device Selection signal, Resource Descriptor field"),
    124     AH_PREDEF ("_DRS",    "Drive Strength", "Drive Strength setting for GPIO connection, Resource Descriptor field"),
    125     AH_PREDEF ("_DSD",    "Device-Specific Data", "Returns a list of device property information"),
    126     AH_PREDEF ("_DSM",    "Device-Specific Method", "Executes device-specific functions"),
    127     AH_PREDEF ("_DSS",    "Device Set State", "Sets the display device state"),
    128     AH_PREDEF ("_DSW",    "Device Sleep Wake", "Sets the sleep and wake transition states for a device"),
    129     AH_PREDEF ("_DTI",    "Device Temperature Indication", "Conveys native device temperature to the platform"),
    130     AH_PREDEF ("_Exx",    "Edge-Triggered GPE", "Method executed as a result of a general-purpose event"),
    131     AH_PREDEF ("_EC_",    "Embedded Controller", "returns EC offset and query information"),
    132     AH_PREDEF ("_EDL",    "Eject Device List", "Returns a list of devices that are dependent on a device (docking)"),
    133     AH_PREDEF ("_EJD",    "Ejection Dependent Device", "Returns the name of dependent (parent) device (docking)"),
    134     AH_PREDEF ("_EJx",    "Eject Device", "Begin or cancel a device ejection request (docking)"),
    135     AH_PREDEF ("_END",    "Endianness", "Endian orientation, Resource Descriptor field"),
    136     AH_PREDEF ("_EVT",    "Event", "Event method for GPIO events"),
    137     AH_PREDEF ("_FDE",    "Floppy Disk Enumerate", "Returns floppy disk configuration information"),
    138     AH_PREDEF ("_FDI",    "Floppy Drive Information", "Returns a floppy drive information block"),
    139     AH_PREDEF ("_FDM",    "Floppy Drive Mode", "Sets a floppy drive speed"),
    140     AH_PREDEF ("_FIF",    "Fan Information", "Returns fan device information"),
    141     AH_PREDEF ("_FIX",    "Fixed Register Resource Provider", "Returns a list of devices that implement FADT register blocks"),
    142     AH_PREDEF ("_FLC",    "Flow Control", "Flow control, Resource Descriptor field"),
    143     AH_PREDEF ("_FPS",    "Fan Performance States", "Returns a list of supported fan performance states"),
    144     AH_PREDEF ("_FSL",    "Fan Set Level", "Control method that sets the fan device's speed level (performance state)"),
    145     AH_PREDEF ("_FST",    "Fan Status", "Returns current status information for a fan device"),
    146     AH_PREDEF ("_GAI",    "Get Averaging Interval", "Returns the power meter averaging interval"),
    147     AH_PREDEF ("_GCP",    "Get Capabilities", "Get device time capabilities"),
    148     AH_PREDEF ("_GHL",    "Get Hardware Limit", "Returns the hardware limit enforced by the power meter"),
    149     AH_PREDEF ("_GL_",    "Global Lock", "OS-defined Global Lock mutex object"),
    150     AH_PREDEF ("_GLK",    "Get Global Lock Requirement", "Returns a device's Global Lock requirement for device access"),
    151     AH_PREDEF ("_GPD",    "Get Post Data", "Returns the value of the VGA device that will be posted at boot"),
    152     AH_PREDEF ("_GPE",    "General Purpose Events", "Predefined scope (\\_GPE) or SCI number for EC"),
    153     AH_PREDEF ("_GRA",    "Granularity", "Address space granularity, Resource Descriptor field"),
    154     AH_PREDEF ("_GRT",    "Get Real Time", "Returns current time-of-day from a time/alarm device"),
    155     AH_PREDEF ("_GSB",    "Global System Interrupt Base", "Returns the GSB for a I/O APIC device"),
    156     AH_PREDEF ("_GTF",    "Get Task File", "Returns a list of ATA commands to restore a drive to default state"),
    157     AH_PREDEF ("_GTM",    "Get Timing Mode", "Returns a list of IDE controller timing information"),
    158     AH_PREDEF ("_GTS",    "Going To Sleep", "Inform AML of pending sleep"),
    159     AH_PREDEF ("_GWS",    "Get Wake Status", "Return status of wake alarms"),
    160     AH_PREDEF ("_HE_",    "High-Edge", "Interrupt triggering, Resource Descriptor field"),
    161     AH_PREDEF ("_HID",    "Hardware ID", "Returns a device's Plug and Play Hardware ID"),
    162     AH_PREDEF ("_HOT",    "Hot Temperature", "Returns the critical temperature for sleep (entry to S4)"),
    163     AH_PREDEF ("_HPP",    "Hot Plug Parameters", "Returns a list of hot-plug information for a PCI device"),
    164     AH_PREDEF ("_HPX",    "Hot Plug Parameter Extensions", "Returns a list of hot-plug information for a PCI device. Supersedes _HPP"),
    165     AH_PREDEF ("_HRV",    "Hardware Revision", "Returns a hardware revision value"),
    166     AH_PREDEF ("_IFT",    "IPMI Interface Type", "See the Intelligent Platform Management Interface Specification"),
    167     AH_PREDEF ("_INI",    "Initialize", "Performs device specific initialization"),
    168     AH_PREDEF ("_INT",    "Interrupts", "Interrupt mask bits, Resource Descriptor field"),
    169     AH_PREDEF ("_IOR",    "I/O Restriction", "Restriction type, Resource Descriptor field"),
    170     AH_PREDEF ("_IRC",    "Inrush Current", "Presence indicates that a device has a significant inrush current draw"),
    171     AH_PREDEF ("_Lxx",    "Level-Triggered GPE", "Control method executed as a result of a general-purpose event"),
    172     AH_PREDEF ("_LCK",    "Lock Device", "Locks or unlocks a device (docking)"),
    173     AH_PREDEF ("_LEN",    "Length", "Range length, Resource Descriptor field"),
    174     AH_PREDEF ("_LID",    "Lid Status", "Returns the open/closed status of the lid on a mobile system"),
    175     AH_PREDEF ("_LIN",    "Lines In Use", "Handshake lines, Resource Descriptor field"),
    176     AH_PREDEF ("_LL_",    "Low Level", "Interrupt polarity, Resource Descriptor field"),
    177     AH_PREDEF ("_LPD",    "Low Power Dependencies", "Returns a list of dependencies for low power idle entry"),
    178     AH_PREDEF ("_MAF",    "Maximum Address Fixed", "Resource Descriptor field"),
    179     AH_PREDEF ("_MAT",    "Multiple APIC Table Entry", "Returns a list of MADT APIC structure entries"),
    180     AH_PREDEF ("_MAX",    "Maximum Base Address", "Resource Descriptor field"),
    181     AH_PREDEF ("_MBM",    "Memory Bandwidth Monitoring Data", "Returns bandwidth monitoring data for a memory device"),
    182     AH_PREDEF ("_MEM",    "Memory Attributes", "Resource Descriptor field"),
    183     AH_PREDEF ("_MIF",    "Minimum Address Fixed", "Resource Descriptor field"),
    184     AH_PREDEF ("_MIN",    "Minimum Base Address", "Resource Descriptor field"),
    185     AH_PREDEF ("_MLS",    "Multiple Language String", "Returns a device description in multiple languages"),
    186     AH_PREDEF ("_MOD",    "Mode", "Interrupt mode, Resource Descriptor field"),
    187     AH_PREDEF ("_MSG",    "Message", "Sets the system message waiting status indicator"),
    188     AH_PREDEF ("_MSM",    "Memory Set Monitoring", "Sets bandwidth monitoring parameters for a memory device"),
    189     AH_PREDEF ("_MTP",    "Memory Type", "Resource Descriptor field"),
    190     AH_PREDEF ("_NTT",    "Notification Temperature Threshold", "Returns a threshold for device temperature change that requires platform notification"),
    191     AH_PREDEF ("_OFF",    "Power Off", "Sets a power resource to the off state"),
    192     AH_PREDEF ("_ON_",    "Power On", "Sets a power resource to the on state"),
    193     AH_PREDEF ("_OS_",    "Operating System", "Returns a string that identifies the operating system"),
    194     AH_PREDEF ("_OSC",    "Operating System Capabilities", "Inform AML of host features and capabilities"),
    195     AH_PREDEF ("_OSI",    "Operating System Interfaces", "Returns supported interfaces, behaviors, and features"),
    196     AH_PREDEF ("_OST",    "OSPM Status Indication", "Inform AML of event processing status"),
    197     AH_PREDEF ("_PAI",    "Power Averaging Interval", "Sets the averaging interval for a power meter"),
    198     AH_PREDEF ("_PAR",    "Parity", "Parity bits, Resource Descriptor field"),
    199     AH_PREDEF ("_PCL",    "Power Consumer List", "Returns a list of devices powered by a power source"),
    200     AH_PREDEF ("_PCT",    "Performance Control", "Returns processor performance control and status registers"),
    201     AH_PREDEF ("_PDC",    "Processor Driver Capabilities", "Inform AML of processor driver capabilities"),
    202     AH_PREDEF ("_PDL",    "P-state Depth Limit", "Returns the lowest available performance P-state"),
    203     AH_PREDEF ("_PHA",    "Clock Phase", "Clock phase, Resource Descriptor field"),
    204     AH_PREDEF ("_PIC",    "Interrupt Model", "Inform AML of the interrupt model in use"),
    205     AH_PREDEF ("_PIF",    "Power Source Information", "Returns a Power Source information block"),
    206     AH_PREDEF ("_PIN",    "Pin List", "Pin list, Resource Descriptor field"),
    207     AH_PREDEF ("_PLD",    "Physical Location of Device", "Returns a device's physical location information"),
    208     AH_PREDEF ("_PMC",    "Power Meter Capabilities", "Returns a list of Power Meter capabilities info"),
    209     AH_PREDEF ("_PMD",    "Power Metered Devices", "Returns a list of devices that are measured by the power meter device"),
    210     AH_PREDEF ("_PMM",    "Power Meter Measurement", "Returns the current value of the Power Meter"),
    211     AH_PREDEF ("_POL",    "Polarity", "Interrupt polarity, Resource Descriptor field"),
    212     AH_PREDEF ("_PPC",    "Performance Present Capabilites", "Returns a list of the performance states currently supported by the platform"),
    213     AH_PREDEF ("_PPE",    "Polling for Platform Error", "Returns the polling interval to retrieve Corrected Platform Error information"),
    214     AH_PREDEF ("_PPI",    "Pin Configuration", "Resource Descriptor field"),
    215     AH_PREDEF ("_PR",     "Processor", "Predefined scope for processor objects"),
    216     AH_PREDEF ("_PR0",    "Power Resources for D0", "Returns a list of dependent power resources to enter state D0 (fully on)"),
    217     AH_PREDEF ("_PR1",    "Power Resources for D1", "Returns a list of dependent power resources to enter state D1"),
    218     AH_PREDEF ("_PR2",    "Power Resources for D2", "Returns a list of dependent power resources to enter state D2"),
    219     AH_PREDEF ("_PR3",    "Power Resources for D3hot", "Returns a list of dependent power resources to enter state D3hot"),
    220     AH_PREDEF ("_PRE",    "Power Resources for Enumeration", "Returns a list of dependent power resources to enumerate devices on a bus"),
    221     AH_PREDEF ("_PRL",    "Power Source Redundancy List", "Returns a list of power source devices in the same redundancy grouping"),
    222     AH_PREDEF ("_PRS",    "Possible Resource Settings", "Returns a list of a device's possible resource settings"),
    223     AH_PREDEF ("_PRT",    "PCI Routing Table", "Returns a list of PCI interrupt mappings"),
    224     AH_PREDEF ("_PRW",    "Power Resources for Wake", "Returns a list of dependent power resources for waking"),
    225     AH_PREDEF ("_PS0",    "Power State 0", "Sets a device's power state to D0 (device fully on)"),
    226     AH_PREDEF ("_PS1",    "Power State 1", "Sets a device's power state to D1"),
    227     AH_PREDEF ("_PS2",    "Power State 2", "Sets a device's power state to D2"),
    228     AH_PREDEF ("_PS3",    "Power State 3", "Sets a device's power state to D3 (device off)"),
    229     AH_PREDEF ("_PSC",    "Power State Current", "Returns a device's current power state"),
    230     AH_PREDEF ("_PSD",    "Power State Dependencies", "Returns processor P-State dependencies"),
    231     AH_PREDEF ("_PSE",    "Power State for Enumeration", "Put a bus into enumeration power mode"),
    232     AH_PREDEF ("_PSL",    "Passive List", "Returns a list of passive cooling device objects"),
    233     AH_PREDEF ("_PSR",    "Power Source", "Returns the power source device currently in use"),
    234     AH_PREDEF ("_PSS",    "Performance Supported States", "Returns a list of supported processor performance states"),
    235     AH_PREDEF ("_PSV",    "Passive Temperature", "Returns the passive trip point temperature"),
    236     AH_PREDEF ("_PSW",    "Power State Wake", "Sets a device's wake function"),
    237     AH_PREDEF ("_PTC",    "Processor Throttling Control", "Returns throttling control and status registers"),
    238     AH_PREDEF ("_PTP",    "Power Trip Points", "Sets trip points for the Power Meter device"),
    239     AH_PREDEF ("_PTS",    "Prepare To Sleep", "Inform the platform of an impending sleep transition"),
    240     AH_PREDEF ("_PUR",    "Processor Utilization Request", "Returns the number of processors that the platform would like to idle"),
    241     AH_PREDEF ("_PXM",    "Device Proximity", "Returns a device's proximity domain identifier"),
    242     AH_PREDEF ("_Qxx",    "EC Query", "Embedded Controller query and SMBus Alarm control method"),
    243     AH_PREDEF ("_RBO",    "Register Bit Offset", "Resource Descriptor field"),
    244     AH_PREDEF ("_RBW",    "Register Bit Width", "Resource Descriptor field"),
    245     AH_PREDEF ("_REG",    "Region Availability", "Inform AML code of an operation region availability change"),
    246     AH_PREDEF ("_REV",    "Supported ACPI Revision", "Returns the revision of the ACPI specification that is implemented"),
    247     AH_PREDEF ("_RMV",    "Removal Status", "Returns a device's removal ability status (docking)"),
    248     AH_PREDEF ("_RNG",    "Range", "Memory range type, Resource Descriptor field"),
    249     AH_PREDEF ("_ROM",    "Read-Only Memory", "Returns a copy of the ROM data for a display device"),
    250     AH_PREDEF ("_RT_",    "Resource Type", "Resource Descriptor field"),
    251     AH_PREDEF ("_RTV",    "Relative Temperature Values", "Returns temperature value information"),
    252     AH_PREDEF ("_RW_",    "Read-Write Status", "Resource Descriptor field"),
    253     AH_PREDEF ("_RXL",    "Receive Buffer Size", "Serial channel buffer, Resource Descriptor field"),
    254     AH_PREDEF ("_S0_",    "S0 System State", "Returns values to enter the system into the S0 state"),
    255     AH_PREDEF ("_S1_",    "S1 System State", "Returns values to enter the system into the S1 state"),
    256     AH_PREDEF ("_S2_",    "S2 System State", "Returns values to enter the system into the S2 state"),
    257     AH_PREDEF ("_S3_",    "S3 System State", "Returns values to enter the system into the S3 state"),
    258     AH_PREDEF ("_S4_",    "S4 System State", "Returns values to enter the system into the S4 state"),
    259     AH_PREDEF ("_S5_",    "S5 System State", "Returns values to enter the system into the S5 state"),
    260     AH_PREDEF ("_S1D",    "S1 Device State", "Returns the highest D-state supported by a device when in the S1 state"),
    261     AH_PREDEF ("_S2D",    "S2 Device State", "Returns the highest D-state supported by a device when in the S2 state"),
    262     AH_PREDEF ("_S3D",    "S3 Device State", "Returns the highest D-state supported by a device when in the S3 state"),
    263     AH_PREDEF ("_S4D",    "S4 Device State", "Returns the highest D-state supported by a device when in the S4 state"),
    264     AH_PREDEF ("_S0W",    "S0 Device Wake State", "Returns the lowest D-state that the device can wake itself from S0"),
    265     AH_PREDEF ("_S1W",    "S1 Device Wake State", "Returns the lowest D-state for this device that can wake the system from S1"),
    266     AH_PREDEF ("_S2W",    "S2 Device Wake State", "Returns the lowest D-state for this device that can wake the system from S2"),
    267     AH_PREDEF ("_S3W",    "S3 Device Wake State", "Returns the lowest D-state for this device that can wake the system from S3"),
    268     AH_PREDEF ("_S4W",    "S4 Device Wake State", "Returns the lowest D-state for this device that can wake the system from S4"),
    269     AH_PREDEF ("_SB_",    "System Bus", "Predefined scope for device and bus objects"),
    270     AH_PREDEF ("_SBS",    "Smart Battery Subsystem", "Returns the subsystem configuration"),
    271     AH_PREDEF ("_SCP",    "Set Cooling Policy", "Sets the cooling policy (active or passive)"),
    272     AH_PREDEF ("_SDD",    "Set Device Data", "Sets data for a SATA device"),
    273     AH_PREDEF ("_SEG",    "PCI Segment", "Returns a device's PCI Segment Group number"),
    274     AH_PREDEF ("_SHL",    "Set Hardware Limit", "Sets the hardware limit enforced by the Power Meter"),
    275     AH_PREDEF ("_SHR",    "Sharable", "Interrupt share status, Resource Descriptor field"),
    276     AH_PREDEF ("_SI_",    "System Indicators", "Predefined scope"),
    277     AH_PREDEF ("_SIZ",    "Size", "DMA transfer size, Resource Descriptor field"),
    278     AH_PREDEF ("_SLI",    "System Locality Information", "Returns a list of NUMA system localities"),
    279     AH_PREDEF ("_SLV",    "Slave Mode", "Mode setting, Resource Descriptor field"),
    280     AH_PREDEF ("_SPD",    "Set Post Device", "Sets which video device will be posted at boot"),
    281     AH_PREDEF ("_SPE",    "Speed", "Connection speed, Resource Descriptor field"),
    282     AH_PREDEF ("_SRS",    "Set Resource Settings", "Sets a device's resource allocation"),
    283     AH_PREDEF ("_SRT",    "Set Real Time", "Sets the current time for a time/alarm device"),
    284     AH_PREDEF ("_SRV",    "IPMI Spec Revision", "See the Intelligent Platform Management Interface Specification"),
    285     AH_PREDEF ("_SST",    "System Status", "Sets the system status indicator"),
    286     AH_PREDEF ("_STA",    "Status", "Returns the current status of a Device or Power Resource"),
    287     AH_PREDEF ("_STB",    "Stop Bits", "Serial channel stop bits, Resource Descriptor field"),
    288     AH_PREDEF ("_STM",    "Set Timing Mode", "Sets an IDE controller transfer timings"),
    289     AH_PREDEF ("_STP",    "Set Expired Timer Wake Policy", "Sets expired timer policies of the wake alarm device"),
    290     AH_PREDEF ("_STR",    "Description String", "Returns a device's description string"),
    291     AH_PREDEF ("_STV",    "Set Timer Value", "Set timer values of the wake alarm device"),
    292     AH_PREDEF ("_SUB",    "Subsystem ID", "Returns the subsystem ID for a device"),
    293     AH_PREDEF ("_SUN",    "Slot User Number", "Returns the slot unique ID number"),
    294     AH_PREDEF ("_SWS",    "System Wake Source", "Returns the source event that caused the system to wake"),
    295     AH_PREDEF ("_T_x",    "Emitted by ASL Compiler", "Reserved for use by ASL compilers"),
    296     AH_PREDEF ("_TC1",    "Thermal Constant 1", "Returns TC1 for the passive cooling formula"),
    297     AH_PREDEF ("_TC2",    "Thermal Constant 2", "Returns TC2 for the passive cooling formula"),
    298     AH_PREDEF ("_TDL",    "T-State Depth Limit", "Returns the _TSS entry number of the lowest power throttling state"),
    299     AH_PREDEF ("_TIP",    "Expired Timer Wake Policy", "Returns timer policies of the wake alarm device"),
    300     AH_PREDEF ("_TIV",    "Timer Values", "Returns remaining time of the wake alarm device"),
    301     AH_PREDEF ("_TMP",    "Temperature", "Returns a thermal zone's current temperature"),
    302     AH_PREDEF ("_TPC",    "Throttling Present Capabilities", "Returns the current number of supported throttling states"),
    303     AH_PREDEF ("_TPT",    "Trip Point Temperature", "Inform AML that a device's embedded temperature sensor has crossed a temperature trip point"),
    304     AH_PREDEF ("_TRA",    "Translation", "Address translation offset, Resource Descriptor field"),
    305     AH_PREDEF ("_TRS",    "Translation Sparse", "Sparse/dense flag, Resource Descriptor field"),
    306     AH_PREDEF ("_TRT",    "Thermal Relationship Table", "Returns thermal relationships between platform devices"),
    307     AH_PREDEF ("_TSD",    "Throttling State Dependencies", "Returns a list of T-state dependencies"),
    308     AH_PREDEF ("_TSF",    "Type-Specific Flags", "Resource Descriptor field"),
    309     AH_PREDEF ("_TSP",    "Thermal Sampling Period", "Returns the thermal sampling period for passive cooling"),
    310     AH_PREDEF ("_TSS",    "Throttling Supported States", "Returns supported throttling state information"),
    311     AH_PREDEF ("_TST",    "Temperature Sensor Threshold", "Returns the minimum separation for a device's temperature trip points"),
    312     AH_PREDEF ("_TTP",    "Translation Type", "Translation/static flag, Resource Descriptor field"),
    313     AH_PREDEF ("_TTS",    "Transition To State", "Inform AML of an S-state transition"),
    314     AH_PREDEF ("_TXL",    "Transmit Buffer Size", "Serial Channel buffer, Resource Descriptor field"),
    315     AH_PREDEF ("_TYP",    "Type", "DMA channel type (speed), Resource Descriptor field"),
    316     AH_PREDEF ("_TZ_",    "Thermal Zone", "Predefined scope: ACPI 1.0"),
    317     AH_PREDEF ("_TZD",    "Thermal Zone Devices", "Returns a list of device names associated with a Thermal Zone"),
    318     AH_PREDEF ("_TZM",    "Thermal Zone Member", "Returns a reference to the thermal zone of which a device is a member"),
    319     AH_PREDEF ("_TZP",    "Thermal Zone Polling", "Returns a Thermal zone's polling frequency"),
    320     AH_PREDEF ("_UID",    "Unique ID", "Return a device's unique persistent ID"),
    321     AH_PREDEF ("_UPC",    "USB Port Capabilities", "Returns a list of USB port capabilities"),
    322     AH_PREDEF ("_UPD",    "User Presence Detect", "Returns user detection information"),
    323     AH_PREDEF ("_UPP",    "User Presence Polling", "Returns the recommended user presence polling interval"),
    324     AH_PREDEF ("_VEN",    "Vendor Data", "Resource Descriptor field"),
    325     AH_PREDEF ("_VPO",    "Video Post Options", "Returns the implemented video post options"),
    326     AH_PREDEF ("_WAK",    "Wake", "Inform AML that the system has just awakened"),
    327     AH_PREDEF ("_Wxx",    "Wake Event", "Method executed as a result of a wake event"),
    328     AH_PREDEF (NULL,      NULL, NULL)
    329 };
    330 
    331 
    332 /*******************************************************************************
    333  *
    334  * FUNCTION:    AcpiAhMatchPredefinedName
    335  *
    336  * PARAMETERS:  Nameseg                 - Predefined name string
    337  *
    338  * RETURN:      ID info struct. NULL if Nameseg not found
    339  *
    340  * DESCRIPTION: Lookup a predefined name.
    341  *
    342  ******************************************************************************/
    343 
    344 const AH_PREDEFINED_NAME *
    345 AcpiAhMatchPredefinedName (
    346     char                        *Nameseg)
    347 {
    348     const AH_PREDEFINED_NAME    *Info;
    349 
    350 
    351     for (Info = AslPredefinedInfo; Info->Name; Info++)
    352     {
    353         if (ACPI_COMPARE_NAME (Nameseg, Info->Name))
    354         {
    355             return (Info);
    356         }
    357     }
    358 
    359     return (NULL);
    360 }
    361