dmtbdump.c revision 1.1.1.2.2.2
1 1.1.1.2.2.2 bouyer /****************************************************************************** 2 1.1.1.2.2.2 bouyer * 3 1.1.1.2.2.2 bouyer * Module Name: dmtbdump - Dump ACPI data tables that contain no AML code 4 1.1.1.2.2.2 bouyer * 5 1.1.1.2.2.2 bouyer *****************************************************************************/ 6 1.1.1.2.2.2 bouyer 7 1.1.1.2.2.2 bouyer /* 8 1.1.1.2.2.2 bouyer * Copyright (C) 2000 - 2011, Intel Corp. 9 1.1.1.2.2.2 bouyer * All rights reserved. 10 1.1.1.2.2.2 bouyer * 11 1.1.1.2.2.2 bouyer * Redistribution and use in source and binary forms, with or without 12 1.1.1.2.2.2 bouyer * modification, are permitted provided that the following conditions 13 1.1.1.2.2.2 bouyer * are met: 14 1.1.1.2.2.2 bouyer * 1. Redistributions of source code must retain the above copyright 15 1.1.1.2.2.2 bouyer * notice, this list of conditions, and the following disclaimer, 16 1.1.1.2.2.2 bouyer * without modification. 17 1.1.1.2.2.2 bouyer * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 1.1.1.2.2.2 bouyer * substantially similar to the "NO WARRANTY" disclaimer below 19 1.1.1.2.2.2 bouyer * ("Disclaimer") and any redistribution must be conditioned upon 20 1.1.1.2.2.2 bouyer * including a substantially similar Disclaimer requirement for further 21 1.1.1.2.2.2 bouyer * binary redistribution. 22 1.1.1.2.2.2 bouyer * 3. Neither the names of the above-listed copyright holders nor the names 23 1.1.1.2.2.2 bouyer * of any contributors may be used to endorse or promote products derived 24 1.1.1.2.2.2 bouyer * from this software without specific prior written permission. 25 1.1.1.2.2.2 bouyer * 26 1.1.1.2.2.2 bouyer * Alternatively, this software may be distributed under the terms of the 27 1.1.1.2.2.2 bouyer * GNU General Public License ("GPL") version 2 as published by the Free 28 1.1.1.2.2.2 bouyer * Software Foundation. 29 1.1.1.2.2.2 bouyer * 30 1.1.1.2.2.2 bouyer * NO WARRANTY 31 1.1.1.2.2.2 bouyer * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 1.1.1.2.2.2 bouyer * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 1.1.1.2.2.2 bouyer * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 1.1.1.2.2.2 bouyer * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 1.1.1.2.2.2 bouyer * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 1.1.1.2.2.2 bouyer * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 1.1.1.2.2.2 bouyer * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 1.1.1.2.2.2 bouyer * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 1.1.1.2.2.2 bouyer * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 1.1.1.2.2.2 bouyer * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 1.1.1.2.2.2 bouyer * POSSIBILITY OF SUCH DAMAGES. 42 1.1.1.2.2.2 bouyer */ 43 1.1.1.2.2.2 bouyer 44 1.1.1.2.2.2 bouyer #include "acpi.h" 45 1.1.1.2.2.2 bouyer #include "accommon.h" 46 1.1.1.2.2.2 bouyer #include "acdisasm.h" 47 1.1.1.2.2.2 bouyer #include "actables.h" 48 1.1.1.2.2.2 bouyer 49 1.1.1.2.2.2 bouyer /* This module used for application-level code only */ 50 1.1.1.2.2.2 bouyer 51 1.1.1.2.2.2 bouyer #define _COMPONENT ACPI_CA_DISASSEMBLER 52 1.1.1.2.2.2 bouyer ACPI_MODULE_NAME ("dmtbdump") 53 1.1.1.2.2.2 bouyer 54 1.1.1.2.2.2 bouyer 55 1.1.1.2.2.2 bouyer static void 56 1.1.1.2.2.2 bouyer AcpiDmValidateFadtLength ( 57 1.1.1.2.2.2 bouyer UINT32 Revision, 58 1.1.1.2.2.2 bouyer UINT32 Length); 59 1.1.1.2.2.2 bouyer 60 1.1.1.2.2.2 bouyer 61 1.1.1.2.2.2 bouyer /******************************************************************************* 62 1.1.1.2.2.2 bouyer * 63 1.1.1.2.2.2 bouyer * FUNCTION: AcpiDmDumpRsdp 64 1.1.1.2.2.2 bouyer * 65 1.1.1.2.2.2 bouyer * PARAMETERS: Table - A RSDP 66 1.1.1.2.2.2 bouyer * 67 1.1.1.2.2.2 bouyer * RETURN: Length of the table (there is not always a length field, 68 1.1.1.2.2.2 bouyer * use revision or length if available (ACPI 2.0+)) 69 1.1.1.2.2.2 bouyer * 70 1.1.1.2.2.2 bouyer * DESCRIPTION: Format the contents of a RSDP 71 1.1.1.2.2.2 bouyer * 72 1.1.1.2.2.2 bouyer ******************************************************************************/ 73 1.1.1.2.2.2 bouyer 74 1.1.1.2.2.2 bouyer UINT32 75 1.1.1.2.2.2 bouyer AcpiDmDumpRsdp ( 76 1.1.1.2.2.2 bouyer ACPI_TABLE_HEADER *Table) 77 1.1.1.2.2.2 bouyer { 78 1.1.1.2.2.2 bouyer ACPI_TABLE_RSDP *Rsdp = ACPI_CAST_PTR (ACPI_TABLE_RSDP, Table); 79 1.1.1.2.2.2 bouyer UINT32 Length = sizeof (ACPI_RSDP_COMMON); 80 1.1.1.2.2.2 bouyer UINT8 Checksum; 81 1.1.1.2.2.2 bouyer 82 1.1.1.2.2.2 bouyer 83 1.1.1.2.2.2 bouyer /* Dump the common ACPI 1.0 portion */ 84 1.1.1.2.2.2 bouyer 85 1.1.1.2.2.2 bouyer AcpiDmDumpTable (Length, 0, Table, 0, AcpiDmTableInfoRsdp1); 86 1.1.1.2.2.2 bouyer 87 1.1.1.2.2.2 bouyer /* Validate the first checksum */ 88 1.1.1.2.2.2 bouyer 89 1.1.1.2.2.2 bouyer Checksum = AcpiDmGenerateChecksum (Rsdp, sizeof (ACPI_RSDP_COMMON), 90 1.1.1.2.2.2 bouyer Rsdp->Checksum); 91 1.1.1.2.2.2 bouyer if (Checksum != Rsdp->Checksum) 92 1.1.1.2.2.2 bouyer { 93 1.1.1.2.2.2 bouyer AcpiOsPrintf ("/* Incorrect Checksum above, should be 0x%2.2X */\n", 94 1.1.1.2.2.2 bouyer Checksum); 95 1.1.1.2.2.2 bouyer } 96 1.1.1.2.2.2 bouyer 97 1.1.1.2.2.2 bouyer /* The RSDP for ACPI 2.0+ contains more data and has a Length field */ 98 1.1.1.2.2.2 bouyer 99 1.1.1.2.2.2 bouyer if (Rsdp->Revision > 0) 100 1.1.1.2.2.2 bouyer { 101 1.1.1.2.2.2 bouyer Length = Rsdp->Length; 102 1.1.1.2.2.2 bouyer AcpiDmDumpTable (Length, 0, Table, 0, AcpiDmTableInfoRsdp2); 103 1.1.1.2.2.2 bouyer 104 1.1.1.2.2.2 bouyer /* Validate the extended checksum over entire RSDP */ 105 1.1.1.2.2.2 bouyer 106 1.1.1.2.2.2 bouyer Checksum = AcpiDmGenerateChecksum (Rsdp, sizeof (ACPI_TABLE_RSDP), 107 1.1.1.2.2.2 bouyer Rsdp->ExtendedChecksum); 108 1.1.1.2.2.2 bouyer if (Checksum != Rsdp->ExtendedChecksum) 109 1.1.1.2.2.2 bouyer { 110 1.1.1.2.2.2 bouyer AcpiOsPrintf ( 111 1.1.1.2.2.2 bouyer "/* Incorrect Extended Checksum above, should be 0x%2.2X */\n", 112 1.1.1.2.2.2 bouyer Checksum); 113 1.1.1.2.2.2 bouyer } 114 1.1.1.2.2.2 bouyer } 115 1.1.1.2.2.2 bouyer 116 1.1.1.2.2.2 bouyer return (Length); 117 1.1.1.2.2.2 bouyer } 118 1.1.1.2.2.2 bouyer 119 1.1.1.2.2.2 bouyer 120 1.1.1.2.2.2 bouyer /******************************************************************************* 121 1.1.1.2.2.2 bouyer * 122 1.1.1.2.2.2 bouyer * FUNCTION: AcpiDmDumpRsdt 123 1.1.1.2.2.2 bouyer * 124 1.1.1.2.2.2 bouyer * PARAMETERS: Table - A RSDT 125 1.1.1.2.2.2 bouyer * 126 1.1.1.2.2.2 bouyer * RETURN: None 127 1.1.1.2.2.2 bouyer * 128 1.1.1.2.2.2 bouyer * DESCRIPTION: Format the contents of a RSDT 129 1.1.1.2.2.2 bouyer * 130 1.1.1.2.2.2 bouyer ******************************************************************************/ 131 1.1.1.2.2.2 bouyer 132 1.1.1.2.2.2 bouyer void 133 1.1.1.2.2.2 bouyer AcpiDmDumpRsdt ( 134 1.1.1.2.2.2 bouyer ACPI_TABLE_HEADER *Table) 135 1.1.1.2.2.2 bouyer { 136 1.1.1.2.2.2 bouyer UINT32 *Array; 137 1.1.1.2.2.2 bouyer UINT32 Entries; 138 1.1.1.2.2.2 bouyer UINT32 Offset; 139 1.1.1.2.2.2 bouyer UINT32 i; 140 1.1.1.2.2.2 bouyer 141 1.1.1.2.2.2 bouyer 142 1.1.1.2.2.2 bouyer /* Point to start of table pointer array */ 143 1.1.1.2.2.2 bouyer 144 1.1.1.2.2.2 bouyer Array = ACPI_CAST_PTR (ACPI_TABLE_RSDT, Table)->TableOffsetEntry; 145 1.1.1.2.2.2 bouyer Offset = sizeof (ACPI_TABLE_HEADER); 146 1.1.1.2.2.2 bouyer 147 1.1.1.2.2.2 bouyer /* RSDT uses 32-bit pointers */ 148 1.1.1.2.2.2 bouyer 149 1.1.1.2.2.2 bouyer Entries = (Table->Length - sizeof (ACPI_TABLE_HEADER)) / sizeof (UINT32); 150 1.1.1.2.2.2 bouyer 151 1.1.1.2.2.2 bouyer for (i = 0; i < Entries; i++) 152 1.1.1.2.2.2 bouyer { 153 1.1.1.2.2.2 bouyer AcpiDmLineHeader2 (Offset, sizeof (UINT32), "ACPI Table Address", i); 154 1.1.1.2.2.2 bouyer AcpiOsPrintf ("%8.8X\n", Array[i]); 155 1.1.1.2.2.2 bouyer Offset += sizeof (UINT32); 156 1.1.1.2.2.2 bouyer } 157 1.1.1.2.2.2 bouyer } 158 1.1.1.2.2.2 bouyer 159 1.1.1.2.2.2 bouyer 160 1.1.1.2.2.2 bouyer /******************************************************************************* 161 1.1.1.2.2.2 bouyer * 162 1.1.1.2.2.2 bouyer * FUNCTION: AcpiDmDumpXsdt 163 1.1.1.2.2.2 bouyer * 164 1.1.1.2.2.2 bouyer * PARAMETERS: Table - A XSDT 165 1.1.1.2.2.2 bouyer * 166 1.1.1.2.2.2 bouyer * RETURN: None 167 1.1.1.2.2.2 bouyer * 168 1.1.1.2.2.2 bouyer * DESCRIPTION: Format the contents of a XSDT 169 1.1.1.2.2.2 bouyer * 170 1.1.1.2.2.2 bouyer ******************************************************************************/ 171 1.1.1.2.2.2 bouyer 172 1.1.1.2.2.2 bouyer void 173 1.1.1.2.2.2 bouyer AcpiDmDumpXsdt ( 174 1.1.1.2.2.2 bouyer ACPI_TABLE_HEADER *Table) 175 1.1.1.2.2.2 bouyer { 176 1.1.1.2.2.2 bouyer UINT64 *Array; 177 1.1.1.2.2.2 bouyer UINT32 Entries; 178 1.1.1.2.2.2 bouyer UINT32 Offset; 179 1.1.1.2.2.2 bouyer UINT32 i; 180 1.1.1.2.2.2 bouyer 181 1.1.1.2.2.2 bouyer 182 1.1.1.2.2.2 bouyer /* Point to start of table pointer array */ 183 1.1.1.2.2.2 bouyer 184 1.1.1.2.2.2 bouyer Array = ACPI_CAST_PTR (ACPI_TABLE_XSDT, Table)->TableOffsetEntry; 185 1.1.1.2.2.2 bouyer Offset = sizeof (ACPI_TABLE_HEADER); 186 1.1.1.2.2.2 bouyer 187 1.1.1.2.2.2 bouyer /* XSDT uses 64-bit pointers */ 188 1.1.1.2.2.2 bouyer 189 1.1.1.2.2.2 bouyer Entries = (Table->Length - sizeof (ACPI_TABLE_HEADER)) / sizeof (UINT64); 190 1.1.1.2.2.2 bouyer 191 1.1.1.2.2.2 bouyer for (i = 0; i < Entries; i++) 192 1.1.1.2.2.2 bouyer { 193 1.1.1.2.2.2 bouyer AcpiDmLineHeader2 (Offset, sizeof (UINT64), "ACPI Table Address", i); 194 1.1.1.2.2.2 bouyer AcpiOsPrintf ("%8.8X%8.8X\n", ACPI_FORMAT_UINT64 (Array[i])); 195 1.1.1.2.2.2 bouyer Offset += sizeof (UINT64); 196 1.1.1.2.2.2 bouyer } 197 1.1.1.2.2.2 bouyer } 198 1.1.1.2.2.2 bouyer 199 1.1.1.2.2.2 bouyer 200 1.1.1.2.2.2 bouyer /******************************************************************************* 201 1.1.1.2.2.2 bouyer * 202 1.1.1.2.2.2 bouyer * FUNCTION: AcpiDmDumpFadt 203 1.1.1.2.2.2 bouyer * 204 1.1.1.2.2.2 bouyer * PARAMETERS: Table - A FADT 205 1.1.1.2.2.2 bouyer * 206 1.1.1.2.2.2 bouyer * RETURN: None 207 1.1.1.2.2.2 bouyer * 208 1.1.1.2.2.2 bouyer * DESCRIPTION: Format the contents of a FADT 209 1.1.1.2.2.2 bouyer * 210 1.1.1.2.2.2 bouyer * NOTE: We cannot depend on the FADT version to indicate the actual 211 1.1.1.2.2.2 bouyer * contents of the FADT because of BIOS bugs. The table length 212 1.1.1.2.2.2 bouyer * is the only reliable indicator. 213 1.1.1.2.2.2 bouyer * 214 1.1.1.2.2.2 bouyer ******************************************************************************/ 215 1.1.1.2.2.2 bouyer 216 1.1.1.2.2.2 bouyer void 217 1.1.1.2.2.2 bouyer AcpiDmDumpFadt ( 218 1.1.1.2.2.2 bouyer ACPI_TABLE_HEADER *Table) 219 1.1.1.2.2.2 bouyer { 220 1.1.1.2.2.2 bouyer 221 1.1.1.2.2.2 bouyer /* Always dump the minimum FADT revision 1 fields (ACPI 1.0) */ 222 1.1.1.2.2.2 bouyer 223 1.1.1.2.2.2 bouyer AcpiDmDumpTable (Table->Length, 0, Table, 0, AcpiDmTableInfoFadt1); 224 1.1.1.2.2.2 bouyer 225 1.1.1.2.2.2 bouyer /* Check for FADT revision 2 fields (ACPI 1.0B MS extensions) */ 226 1.1.1.2.2.2 bouyer 227 1.1.1.2.2.2 bouyer if ((Table->Length > ACPI_FADT_V1_SIZE) && 228 1.1.1.2.2.2 bouyer (Table->Length <= ACPI_FADT_V2_SIZE)) 229 1.1.1.2.2.2 bouyer { 230 1.1.1.2.2.2 bouyer AcpiDmDumpTable (Table->Length, 0, Table, 0, AcpiDmTableInfoFadt2); 231 1.1.1.2.2.2 bouyer } 232 1.1.1.2.2.2 bouyer 233 1.1.1.2.2.2 bouyer /* Check for FADT revision 3 fields and up (ACPI 2.0+ extended data) */ 234 1.1.1.2.2.2 bouyer 235 1.1.1.2.2.2 bouyer else if (Table->Length > ACPI_FADT_V2_SIZE) 236 1.1.1.2.2.2 bouyer { 237 1.1.1.2.2.2 bouyer AcpiDmDumpTable (Table->Length, 0, Table, 0, AcpiDmTableInfoFadt3); 238 1.1.1.2.2.2 bouyer } 239 1.1.1.2.2.2 bouyer 240 1.1.1.2.2.2 bouyer /* Validate various fields in the FADT, including length */ 241 1.1.1.2.2.2 bouyer 242 1.1.1.2.2.2 bouyer AcpiTbCreateLocalFadt (Table, Table->Length); 243 1.1.1.2.2.2 bouyer 244 1.1.1.2.2.2 bouyer /* Validate FADT length against the revision */ 245 1.1.1.2.2.2 bouyer 246 1.1.1.2.2.2 bouyer AcpiDmValidateFadtLength (Table->Revision, Table->Length); 247 1.1.1.2.2.2 bouyer } 248 1.1.1.2.2.2 bouyer 249 1.1.1.2.2.2 bouyer 250 1.1.1.2.2.2 bouyer /******************************************************************************* 251 1.1.1.2.2.2 bouyer * 252 1.1.1.2.2.2 bouyer * FUNCTION: AcpiDmValidateFadtLength 253 1.1.1.2.2.2 bouyer * 254 1.1.1.2.2.2 bouyer * PARAMETERS: Revision - FADT revision (Header->Revision) 255 1.1.1.2.2.2 bouyer * Length - FADT length (Header->Length 256 1.1.1.2.2.2 bouyer * 257 1.1.1.2.2.2 bouyer * RETURN: None 258 1.1.1.2.2.2 bouyer * 259 1.1.1.2.2.2 bouyer * DESCRIPTION: Check the FADT revision against the expected table length for 260 1.1.1.2.2.2 bouyer * that revision. Issue a warning if the length is not what was 261 1.1.1.2.2.2 bouyer * expected. This seems to be such a common BIOS bug that the 262 1.1.1.2.2.2 bouyer * FADT revision has been rendered virtually meaningless. 263 1.1.1.2.2.2 bouyer * 264 1.1.1.2.2.2 bouyer ******************************************************************************/ 265 1.1.1.2.2.2 bouyer 266 1.1.1.2.2.2 bouyer static void 267 1.1.1.2.2.2 bouyer AcpiDmValidateFadtLength ( 268 1.1.1.2.2.2 bouyer UINT32 Revision, 269 1.1.1.2.2.2 bouyer UINT32 Length) 270 1.1.1.2.2.2 bouyer { 271 1.1.1.2.2.2 bouyer UINT32 ExpectedLength; 272 1.1.1.2.2.2 bouyer 273 1.1.1.2.2.2 bouyer 274 1.1.1.2.2.2 bouyer switch (Revision) 275 1.1.1.2.2.2 bouyer { 276 1.1.1.2.2.2 bouyer case 0: 277 1.1.1.2.2.2 bouyer AcpiOsPrintf ("// ACPI Warning: Invalid FADT revision: 0\n"); 278 1.1.1.2.2.2 bouyer return; 279 1.1.1.2.2.2 bouyer 280 1.1.1.2.2.2 bouyer case 1: 281 1.1.1.2.2.2 bouyer ExpectedLength = ACPI_FADT_V1_SIZE; 282 1.1.1.2.2.2 bouyer break; 283 1.1.1.2.2.2 bouyer 284 1.1.1.2.2.2 bouyer case 2: 285 1.1.1.2.2.2 bouyer ExpectedLength = ACPI_FADT_V2_SIZE; 286 1.1.1.2.2.2 bouyer break; 287 1.1.1.2.2.2 bouyer 288 1.1.1.2.2.2 bouyer case 3: 289 1.1.1.2.2.2 bouyer case 4: 290 1.1.1.2.2.2 bouyer ExpectedLength = ACPI_FADT_V3_SIZE; 291 1.1.1.2.2.2 bouyer break; 292 1.1.1.2.2.2 bouyer 293 1.1.1.2.2.2 bouyer default: 294 1.1.1.2.2.2 bouyer return; 295 1.1.1.2.2.2 bouyer } 296 1.1.1.2.2.2 bouyer 297 1.1.1.2.2.2 bouyer if (Length == ExpectedLength) 298 1.1.1.2.2.2 bouyer { 299 1.1.1.2.2.2 bouyer return; 300 1.1.1.2.2.2 bouyer } 301 1.1.1.2.2.2 bouyer 302 1.1.1.2.2.2 bouyer AcpiOsPrintf ( 303 1.1.1.2.2.2 bouyer "\n// ACPI Warning: FADT revision %X does not match length: found %X expected %X\n", 304 1.1.1.2.2.2 bouyer Revision, Length, ExpectedLength); 305 1.1.1.2.2.2 bouyer } 306 1.1.1.2.2.2 bouyer 307 1.1.1.2.2.2 bouyer 308 1.1.1.2.2.2 bouyer /******************************************************************************* 309 1.1.1.2.2.2 bouyer * 310 1.1.1.2.2.2 bouyer * FUNCTION: AcpiDmDumpAsf 311 1.1.1.2.2.2 bouyer * 312 1.1.1.2.2.2 bouyer * PARAMETERS: Table - A ASF table 313 1.1.1.2.2.2 bouyer * 314 1.1.1.2.2.2 bouyer * RETURN: None 315 1.1.1.2.2.2 bouyer * 316 1.1.1.2.2.2 bouyer * DESCRIPTION: Format the contents of a ASF table 317 1.1.1.2.2.2 bouyer * 318 1.1.1.2.2.2 bouyer ******************************************************************************/ 319 1.1.1.2.2.2 bouyer 320 1.1.1.2.2.2 bouyer void 321 1.1.1.2.2.2 bouyer AcpiDmDumpAsf ( 322 1.1.1.2.2.2 bouyer ACPI_TABLE_HEADER *Table) 323 1.1.1.2.2.2 bouyer { 324 1.1.1.2.2.2 bouyer ACPI_STATUS Status; 325 1.1.1.2.2.2 bouyer UINT32 Offset = sizeof (ACPI_TABLE_HEADER); 326 1.1.1.2.2.2 bouyer ACPI_ASF_INFO *SubTable; 327 1.1.1.2.2.2 bouyer ACPI_DMTABLE_INFO *InfoTable; 328 1.1.1.2.2.2 bouyer ACPI_DMTABLE_INFO *DataInfoTable = NULL; 329 1.1.1.2.2.2 bouyer UINT8 *DataTable = NULL; 330 1.1.1.2.2.2 bouyer UINT32 DataCount = 0; 331 1.1.1.2.2.2 bouyer UINT32 DataLength = 0; 332 1.1.1.2.2.2 bouyer UINT32 DataOffset = 0; 333 1.1.1.2.2.2 bouyer UINT32 i; 334 1.1.1.2.2.2 bouyer UINT8 Type; 335 1.1.1.2.2.2 bouyer 336 1.1.1.2.2.2 bouyer 337 1.1.1.2.2.2 bouyer /* No main table, only sub-tables */ 338 1.1.1.2.2.2 bouyer 339 1.1.1.2.2.2 bouyer SubTable = ACPI_ADD_PTR (ACPI_ASF_INFO, Table, Offset); 340 1.1.1.2.2.2 bouyer while (Offset < Table->Length) 341 1.1.1.2.2.2 bouyer { 342 1.1.1.2.2.2 bouyer /* Common sub-table header */ 343 1.1.1.2.2.2 bouyer 344 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Table->Length, Offset, SubTable, 345 1.1.1.2.2.2 bouyer SubTable->Header.Length, AcpiDmTableInfoAsfHdr); 346 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 347 1.1.1.2.2.2 bouyer { 348 1.1.1.2.2.2 bouyer return; 349 1.1.1.2.2.2 bouyer } 350 1.1.1.2.2.2 bouyer 351 1.1.1.2.2.2 bouyer /* The actual type is the lower 7 bits of Type */ 352 1.1.1.2.2.2 bouyer 353 1.1.1.2.2.2 bouyer Type = (UINT8) (SubTable->Header.Type & 0x7F); 354 1.1.1.2.2.2 bouyer 355 1.1.1.2.2.2 bouyer switch (Type) 356 1.1.1.2.2.2 bouyer { 357 1.1.1.2.2.2 bouyer case ACPI_ASF_TYPE_INFO: 358 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoAsf0; 359 1.1.1.2.2.2 bouyer break; 360 1.1.1.2.2.2 bouyer 361 1.1.1.2.2.2 bouyer case ACPI_ASF_TYPE_ALERT: 362 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoAsf1; 363 1.1.1.2.2.2 bouyer DataInfoTable = AcpiDmTableInfoAsf1a; 364 1.1.1.2.2.2 bouyer DataTable = ACPI_ADD_PTR (UINT8, SubTable, sizeof (ACPI_ASF_ALERT)); 365 1.1.1.2.2.2 bouyer DataCount = ACPI_CAST_PTR (ACPI_ASF_ALERT, SubTable)->Alerts; 366 1.1.1.2.2.2 bouyer DataLength = ACPI_CAST_PTR (ACPI_ASF_ALERT, SubTable)->DataLength; 367 1.1.1.2.2.2 bouyer DataOffset = Offset + sizeof (ACPI_ASF_ALERT); 368 1.1.1.2.2.2 bouyer break; 369 1.1.1.2.2.2 bouyer 370 1.1.1.2.2.2 bouyer case ACPI_ASF_TYPE_CONTROL: 371 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoAsf2; 372 1.1.1.2.2.2 bouyer DataInfoTable = AcpiDmTableInfoAsf2a; 373 1.1.1.2.2.2 bouyer DataTable = ACPI_ADD_PTR (UINT8, SubTable, sizeof (ACPI_ASF_REMOTE)); 374 1.1.1.2.2.2 bouyer DataCount = ACPI_CAST_PTR (ACPI_ASF_REMOTE, SubTable)->Controls; 375 1.1.1.2.2.2 bouyer DataLength = ACPI_CAST_PTR (ACPI_ASF_REMOTE, SubTable)->DataLength; 376 1.1.1.2.2.2 bouyer DataOffset = Offset + sizeof (ACPI_ASF_REMOTE); 377 1.1.1.2.2.2 bouyer break; 378 1.1.1.2.2.2 bouyer 379 1.1.1.2.2.2 bouyer case ACPI_ASF_TYPE_BOOT: 380 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoAsf3; 381 1.1.1.2.2.2 bouyer break; 382 1.1.1.2.2.2 bouyer 383 1.1.1.2.2.2 bouyer case ACPI_ASF_TYPE_ADDRESS: 384 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoAsf4; 385 1.1.1.2.2.2 bouyer DataTable = ACPI_ADD_PTR (UINT8, SubTable, sizeof (ACPI_ASF_ADDRESS)); 386 1.1.1.2.2.2 bouyer DataLength = ACPI_CAST_PTR (ACPI_ASF_ADDRESS, SubTable)->Devices; 387 1.1.1.2.2.2 bouyer DataOffset = Offset + sizeof (ACPI_ASF_ADDRESS); 388 1.1.1.2.2.2 bouyer break; 389 1.1.1.2.2.2 bouyer 390 1.1.1.2.2.2 bouyer default: 391 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n**** Unknown ASF sub-table type 0x%X\n", SubTable->Header.Type); 392 1.1.1.2.2.2 bouyer return; 393 1.1.1.2.2.2 bouyer } 394 1.1.1.2.2.2 bouyer 395 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Table->Length, Offset, SubTable, 396 1.1.1.2.2.2 bouyer SubTable->Header.Length, InfoTable); 397 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 398 1.1.1.2.2.2 bouyer { 399 1.1.1.2.2.2 bouyer return; 400 1.1.1.2.2.2 bouyer } 401 1.1.1.2.2.2 bouyer 402 1.1.1.2.2.2 bouyer /* Dump variable-length extra data */ 403 1.1.1.2.2.2 bouyer 404 1.1.1.2.2.2 bouyer switch (Type) 405 1.1.1.2.2.2 bouyer { 406 1.1.1.2.2.2 bouyer case ACPI_ASF_TYPE_ALERT: 407 1.1.1.2.2.2 bouyer case ACPI_ASF_TYPE_CONTROL: 408 1.1.1.2.2.2 bouyer 409 1.1.1.2.2.2 bouyer for (i = 0; i < DataCount; i++) 410 1.1.1.2.2.2 bouyer { 411 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n"); 412 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Table->Length, DataOffset, 413 1.1.1.2.2.2 bouyer DataTable, DataLength, DataInfoTable); 414 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 415 1.1.1.2.2.2 bouyer { 416 1.1.1.2.2.2 bouyer return; 417 1.1.1.2.2.2 bouyer } 418 1.1.1.2.2.2 bouyer 419 1.1.1.2.2.2 bouyer DataTable = ACPI_ADD_PTR (UINT8, DataTable, DataLength); 420 1.1.1.2.2.2 bouyer DataOffset += DataLength; 421 1.1.1.2.2.2 bouyer } 422 1.1.1.2.2.2 bouyer break; 423 1.1.1.2.2.2 bouyer 424 1.1.1.2.2.2 bouyer case ACPI_ASF_TYPE_ADDRESS: 425 1.1.1.2.2.2 bouyer 426 1.1.1.2.2.2 bouyer for (i = 0; i < DataLength; i++) 427 1.1.1.2.2.2 bouyer { 428 1.1.1.2.2.2 bouyer if (!(i % 16)) 429 1.1.1.2.2.2 bouyer { 430 1.1.1.2.2.2 bouyer AcpiDmLineHeader (DataOffset, 1, "Addresses"); 431 1.1.1.2.2.2 bouyer } 432 1.1.1.2.2.2 bouyer 433 1.1.1.2.2.2 bouyer AcpiOsPrintf ("%2.2X ", *DataTable); 434 1.1.1.2.2.2 bouyer DataTable++; 435 1.1.1.2.2.2 bouyer DataOffset++; 436 1.1.1.2.2.2 bouyer if (DataOffset > Table->Length) 437 1.1.1.2.2.2 bouyer { 438 1.1.1.2.2.2 bouyer AcpiOsPrintf ("**** ACPI table terminates in the middle of a data structure!\n"); 439 1.1.1.2.2.2 bouyer return; 440 1.1.1.2.2.2 bouyer } 441 1.1.1.2.2.2 bouyer } 442 1.1.1.2.2.2 bouyer 443 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n"); 444 1.1.1.2.2.2 bouyer break; 445 1.1.1.2.2.2 bouyer 446 1.1.1.2.2.2 bouyer default: 447 1.1.1.2.2.2 bouyer break; 448 1.1.1.2.2.2 bouyer } 449 1.1.1.2.2.2 bouyer 450 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n"); 451 1.1.1.2.2.2 bouyer 452 1.1.1.2.2.2 bouyer /* Point to next sub-table */ 453 1.1.1.2.2.2 bouyer 454 1.1.1.2.2.2 bouyer if (!SubTable->Header.Length) 455 1.1.1.2.2.2 bouyer { 456 1.1.1.2.2.2 bouyer AcpiOsPrintf ("Invalid zero subtable header length\n"); 457 1.1.1.2.2.2 bouyer return; 458 1.1.1.2.2.2 bouyer } 459 1.1.1.2.2.2 bouyer 460 1.1.1.2.2.2 bouyer Offset += SubTable->Header.Length; 461 1.1.1.2.2.2 bouyer SubTable = ACPI_ADD_PTR (ACPI_ASF_INFO, SubTable, SubTable->Header.Length); 462 1.1.1.2.2.2 bouyer } 463 1.1.1.2.2.2 bouyer } 464 1.1.1.2.2.2 bouyer 465 1.1.1.2.2.2 bouyer 466 1.1.1.2.2.2 bouyer /******************************************************************************* 467 1.1.1.2.2.2 bouyer * 468 1.1.1.2.2.2 bouyer * FUNCTION: AcpiDmDumpCpep 469 1.1.1.2.2.2 bouyer * 470 1.1.1.2.2.2 bouyer * PARAMETERS: Table - A CPEP table 471 1.1.1.2.2.2 bouyer * 472 1.1.1.2.2.2 bouyer * RETURN: None 473 1.1.1.2.2.2 bouyer * 474 1.1.1.2.2.2 bouyer * DESCRIPTION: Format the contents of a CPEP. This table type consists 475 1.1.1.2.2.2 bouyer * of an open-ended number of subtables. 476 1.1.1.2.2.2 bouyer * 477 1.1.1.2.2.2 bouyer ******************************************************************************/ 478 1.1.1.2.2.2 bouyer 479 1.1.1.2.2.2 bouyer void 480 1.1.1.2.2.2 bouyer AcpiDmDumpCpep ( 481 1.1.1.2.2.2 bouyer ACPI_TABLE_HEADER *Table) 482 1.1.1.2.2.2 bouyer { 483 1.1.1.2.2.2 bouyer ACPI_STATUS Status; 484 1.1.1.2.2.2 bouyer ACPI_CPEP_POLLING *SubTable; 485 1.1.1.2.2.2 bouyer UINT32 Length = Table->Length; 486 1.1.1.2.2.2 bouyer UINT32 Offset = sizeof (ACPI_TABLE_CPEP); 487 1.1.1.2.2.2 bouyer 488 1.1.1.2.2.2 bouyer 489 1.1.1.2.2.2 bouyer /* Main table */ 490 1.1.1.2.2.2 bouyer 491 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Length, 0, Table, 0, AcpiDmTableInfoCpep); 492 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 493 1.1.1.2.2.2 bouyer { 494 1.1.1.2.2.2 bouyer return; 495 1.1.1.2.2.2 bouyer } 496 1.1.1.2.2.2 bouyer 497 1.1.1.2.2.2 bouyer /* Sub-tables */ 498 1.1.1.2.2.2 bouyer 499 1.1.1.2.2.2 bouyer SubTable = ACPI_ADD_PTR (ACPI_CPEP_POLLING, Table, Offset); 500 1.1.1.2.2.2 bouyer while (Offset < Table->Length) 501 1.1.1.2.2.2 bouyer { 502 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n"); 503 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Length, Offset, SubTable, 504 1.1.1.2.2.2 bouyer SubTable->Header.Length, AcpiDmTableInfoCpep0); 505 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 506 1.1.1.2.2.2 bouyer { 507 1.1.1.2.2.2 bouyer return; 508 1.1.1.2.2.2 bouyer } 509 1.1.1.2.2.2 bouyer 510 1.1.1.2.2.2 bouyer /* Point to next sub-table */ 511 1.1.1.2.2.2 bouyer 512 1.1.1.2.2.2 bouyer Offset += SubTable->Header.Length; 513 1.1.1.2.2.2 bouyer SubTable = ACPI_ADD_PTR (ACPI_CPEP_POLLING, SubTable, 514 1.1.1.2.2.2 bouyer SubTable->Header.Length); 515 1.1.1.2.2.2 bouyer } 516 1.1.1.2.2.2 bouyer } 517 1.1.1.2.2.2 bouyer 518 1.1.1.2.2.2 bouyer 519 1.1.1.2.2.2 bouyer /******************************************************************************* 520 1.1.1.2.2.2 bouyer * 521 1.1.1.2.2.2 bouyer * FUNCTION: AcpiDmDumpDmar 522 1.1.1.2.2.2 bouyer * 523 1.1.1.2.2.2 bouyer * PARAMETERS: Table - A DMAR table 524 1.1.1.2.2.2 bouyer * 525 1.1.1.2.2.2 bouyer * RETURN: None 526 1.1.1.2.2.2 bouyer * 527 1.1.1.2.2.2 bouyer * DESCRIPTION: Format the contents of a DMAR. This table type consists 528 1.1.1.2.2.2 bouyer * of an open-ended number of subtables. 529 1.1.1.2.2.2 bouyer * 530 1.1.1.2.2.2 bouyer ******************************************************************************/ 531 1.1.1.2.2.2 bouyer 532 1.1.1.2.2.2 bouyer void 533 1.1.1.2.2.2 bouyer AcpiDmDumpDmar ( 534 1.1.1.2.2.2 bouyer ACPI_TABLE_HEADER *Table) 535 1.1.1.2.2.2 bouyer { 536 1.1.1.2.2.2 bouyer ACPI_STATUS Status; 537 1.1.1.2.2.2 bouyer ACPI_DMAR_HEADER *SubTable; 538 1.1.1.2.2.2 bouyer UINT32 Length = Table->Length; 539 1.1.1.2.2.2 bouyer UINT32 Offset = sizeof (ACPI_TABLE_DMAR); 540 1.1.1.2.2.2 bouyer ACPI_DMTABLE_INFO *InfoTable; 541 1.1.1.2.2.2 bouyer ACPI_DMAR_DEVICE_SCOPE *ScopeTable; 542 1.1.1.2.2.2 bouyer UINT32 ScopeOffset; 543 1.1.1.2.2.2 bouyer UINT8 *PciPath; 544 1.1.1.2.2.2 bouyer UINT32 PathOffset; 545 1.1.1.2.2.2 bouyer 546 1.1.1.2.2.2 bouyer 547 1.1.1.2.2.2 bouyer /* Main table */ 548 1.1.1.2.2.2 bouyer 549 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Length, 0, Table, 0, AcpiDmTableInfoDmar); 550 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 551 1.1.1.2.2.2 bouyer { 552 1.1.1.2.2.2 bouyer return; 553 1.1.1.2.2.2 bouyer } 554 1.1.1.2.2.2 bouyer 555 1.1.1.2.2.2 bouyer /* Sub-tables */ 556 1.1.1.2.2.2 bouyer 557 1.1.1.2.2.2 bouyer SubTable = ACPI_ADD_PTR (ACPI_DMAR_HEADER, Table, Offset); 558 1.1.1.2.2.2 bouyer while (Offset < Table->Length) 559 1.1.1.2.2.2 bouyer { 560 1.1.1.2.2.2 bouyer /* Common sub-table header */ 561 1.1.1.2.2.2 bouyer 562 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n"); 563 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Length, Offset, SubTable, 564 1.1.1.2.2.2 bouyer SubTable->Length, AcpiDmTableInfoDmarHdr); 565 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 566 1.1.1.2.2.2 bouyer { 567 1.1.1.2.2.2 bouyer return; 568 1.1.1.2.2.2 bouyer } 569 1.1.1.2.2.2 bouyer 570 1.1.1.2.2.2 bouyer switch (SubTable->Type) 571 1.1.1.2.2.2 bouyer { 572 1.1.1.2.2.2 bouyer case ACPI_DMAR_TYPE_HARDWARE_UNIT: 573 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoDmar0; 574 1.1.1.2.2.2 bouyer ScopeOffset = sizeof (ACPI_DMAR_HARDWARE_UNIT); 575 1.1.1.2.2.2 bouyer break; 576 1.1.1.2.2.2 bouyer case ACPI_DMAR_TYPE_RESERVED_MEMORY: 577 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoDmar1; 578 1.1.1.2.2.2 bouyer ScopeOffset = sizeof (ACPI_DMAR_RESERVED_MEMORY); 579 1.1.1.2.2.2 bouyer break; 580 1.1.1.2.2.2 bouyer case ACPI_DMAR_TYPE_ATSR: 581 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoDmar2; 582 1.1.1.2.2.2 bouyer ScopeOffset = sizeof (ACPI_DMAR_ATSR); 583 1.1.1.2.2.2 bouyer break; 584 1.1.1.2.2.2 bouyer case ACPI_DMAR_HARDWARE_AFFINITY: 585 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoDmar3; 586 1.1.1.2.2.2 bouyer ScopeOffset = sizeof (ACPI_DMAR_RHSA); 587 1.1.1.2.2.2 bouyer break; 588 1.1.1.2.2.2 bouyer default: 589 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n**** Unknown DMAR sub-table type 0x%X\n\n", SubTable->Type); 590 1.1.1.2.2.2 bouyer return; 591 1.1.1.2.2.2 bouyer } 592 1.1.1.2.2.2 bouyer 593 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Length, Offset, SubTable, 594 1.1.1.2.2.2 bouyer SubTable->Length, InfoTable); 595 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 596 1.1.1.2.2.2 bouyer { 597 1.1.1.2.2.2 bouyer return; 598 1.1.1.2.2.2 bouyer } 599 1.1.1.2.2.2 bouyer 600 1.1.1.2.2.2 bouyer /* Dump the device scope entries (if any) */ 601 1.1.1.2.2.2 bouyer 602 1.1.1.2.2.2 bouyer ScopeTable = ACPI_ADD_PTR (ACPI_DMAR_DEVICE_SCOPE, SubTable, ScopeOffset); 603 1.1.1.2.2.2 bouyer while (ScopeOffset < SubTable->Length) 604 1.1.1.2.2.2 bouyer { 605 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n"); 606 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Length, Offset + ScopeOffset, ScopeTable, 607 1.1.1.2.2.2 bouyer ScopeTable->Length, AcpiDmTableInfoDmarScope); 608 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 609 1.1.1.2.2.2 bouyer { 610 1.1.1.2.2.2 bouyer return; 611 1.1.1.2.2.2 bouyer } 612 1.1.1.2.2.2 bouyer 613 1.1.1.2.2.2 bouyer /* Dump the PCI Path entries for this device scope */ 614 1.1.1.2.2.2 bouyer 615 1.1.1.2.2.2 bouyer PathOffset = sizeof (ACPI_DMAR_DEVICE_SCOPE); /* Path entries start at this offset */ 616 1.1.1.2.2.2 bouyer 617 1.1.1.2.2.2 bouyer PciPath = ACPI_ADD_PTR (UINT8, ScopeTable, 618 1.1.1.2.2.2 bouyer sizeof (ACPI_DMAR_DEVICE_SCOPE)); 619 1.1.1.2.2.2 bouyer 620 1.1.1.2.2.2 bouyer while (PathOffset < ScopeTable->Length) 621 1.1.1.2.2.2 bouyer { 622 1.1.1.2.2.2 bouyer AcpiDmLineHeader ((PathOffset + ScopeOffset + Offset), 2, "PCI Path"); 623 1.1.1.2.2.2 bouyer AcpiOsPrintf ("%2.2X,%2.2X\n", PciPath[0], PciPath[1]); 624 1.1.1.2.2.2 bouyer 625 1.1.1.2.2.2 bouyer /* Point to next PCI Path entry */ 626 1.1.1.2.2.2 bouyer 627 1.1.1.2.2.2 bouyer PathOffset += 2; 628 1.1.1.2.2.2 bouyer PciPath += 2; 629 1.1.1.2.2.2 bouyer } 630 1.1.1.2.2.2 bouyer 631 1.1.1.2.2.2 bouyer /* Point to next device scope entry */ 632 1.1.1.2.2.2 bouyer 633 1.1.1.2.2.2 bouyer ScopeOffset += ScopeTable->Length; 634 1.1.1.2.2.2 bouyer ScopeTable = ACPI_ADD_PTR (ACPI_DMAR_DEVICE_SCOPE, 635 1.1.1.2.2.2 bouyer ScopeTable, ScopeTable->Length); 636 1.1.1.2.2.2 bouyer } 637 1.1.1.2.2.2 bouyer 638 1.1.1.2.2.2 bouyer /* Point to next sub-table */ 639 1.1.1.2.2.2 bouyer 640 1.1.1.2.2.2 bouyer Offset += SubTable->Length; 641 1.1.1.2.2.2 bouyer SubTable = ACPI_ADD_PTR (ACPI_DMAR_HEADER, SubTable, SubTable->Length); 642 1.1.1.2.2.2 bouyer } 643 1.1.1.2.2.2 bouyer } 644 1.1.1.2.2.2 bouyer 645 1.1.1.2.2.2 bouyer 646 1.1.1.2.2.2 bouyer /******************************************************************************* 647 1.1.1.2.2.2 bouyer * 648 1.1.1.2.2.2 bouyer * FUNCTION: AcpiDmDumpEinj 649 1.1.1.2.2.2 bouyer * 650 1.1.1.2.2.2 bouyer * PARAMETERS: Table - A EINJ table 651 1.1.1.2.2.2 bouyer * 652 1.1.1.2.2.2 bouyer * RETURN: None 653 1.1.1.2.2.2 bouyer * 654 1.1.1.2.2.2 bouyer * DESCRIPTION: Format the contents of a EINJ. This table type consists 655 1.1.1.2.2.2 bouyer * of an open-ended number of subtables. 656 1.1.1.2.2.2 bouyer * 657 1.1.1.2.2.2 bouyer ******************************************************************************/ 658 1.1.1.2.2.2 bouyer 659 1.1.1.2.2.2 bouyer void 660 1.1.1.2.2.2 bouyer AcpiDmDumpEinj ( 661 1.1.1.2.2.2 bouyer ACPI_TABLE_HEADER *Table) 662 1.1.1.2.2.2 bouyer { 663 1.1.1.2.2.2 bouyer ACPI_STATUS Status; 664 1.1.1.2.2.2 bouyer ACPI_WHEA_HEADER *SubTable; 665 1.1.1.2.2.2 bouyer UINT32 Length = Table->Length; 666 1.1.1.2.2.2 bouyer UINT32 Offset = sizeof (ACPI_TABLE_EINJ); 667 1.1.1.2.2.2 bouyer 668 1.1.1.2.2.2 bouyer 669 1.1.1.2.2.2 bouyer /* Main table */ 670 1.1.1.2.2.2 bouyer 671 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Length, 0, Table, 0, AcpiDmTableInfoEinj); 672 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 673 1.1.1.2.2.2 bouyer { 674 1.1.1.2.2.2 bouyer return; 675 1.1.1.2.2.2 bouyer } 676 1.1.1.2.2.2 bouyer 677 1.1.1.2.2.2 bouyer /* Sub-tables */ 678 1.1.1.2.2.2 bouyer 679 1.1.1.2.2.2 bouyer SubTable = ACPI_ADD_PTR (ACPI_WHEA_HEADER, Table, Offset); 680 1.1.1.2.2.2 bouyer while (Offset < Table->Length) 681 1.1.1.2.2.2 bouyer { 682 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n"); 683 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Length, Offset, SubTable, 684 1.1.1.2.2.2 bouyer sizeof (ACPI_WHEA_HEADER), AcpiDmTableInfoEinj0); 685 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 686 1.1.1.2.2.2 bouyer { 687 1.1.1.2.2.2 bouyer return; 688 1.1.1.2.2.2 bouyer } 689 1.1.1.2.2.2 bouyer 690 1.1.1.2.2.2 bouyer /* Point to next sub-table (each subtable is of fixed length) */ 691 1.1.1.2.2.2 bouyer 692 1.1.1.2.2.2 bouyer Offset += sizeof (ACPI_WHEA_HEADER); 693 1.1.1.2.2.2 bouyer SubTable = ACPI_ADD_PTR (ACPI_WHEA_HEADER, SubTable, 694 1.1.1.2.2.2 bouyer sizeof (ACPI_WHEA_HEADER)); 695 1.1.1.2.2.2 bouyer } 696 1.1.1.2.2.2 bouyer } 697 1.1.1.2.2.2 bouyer 698 1.1.1.2.2.2 bouyer 699 1.1.1.2.2.2 bouyer /******************************************************************************* 700 1.1.1.2.2.2 bouyer * 701 1.1.1.2.2.2 bouyer * FUNCTION: AcpiDmDumpErst 702 1.1.1.2.2.2 bouyer * 703 1.1.1.2.2.2 bouyer * PARAMETERS: Table - A ERST table 704 1.1.1.2.2.2 bouyer * 705 1.1.1.2.2.2 bouyer * RETURN: None 706 1.1.1.2.2.2 bouyer * 707 1.1.1.2.2.2 bouyer * DESCRIPTION: Format the contents of a ERST. This table type consists 708 1.1.1.2.2.2 bouyer * of an open-ended number of subtables. 709 1.1.1.2.2.2 bouyer * 710 1.1.1.2.2.2 bouyer ******************************************************************************/ 711 1.1.1.2.2.2 bouyer 712 1.1.1.2.2.2 bouyer void 713 1.1.1.2.2.2 bouyer AcpiDmDumpErst ( 714 1.1.1.2.2.2 bouyer ACPI_TABLE_HEADER *Table) 715 1.1.1.2.2.2 bouyer { 716 1.1.1.2.2.2 bouyer ACPI_STATUS Status; 717 1.1.1.2.2.2 bouyer ACPI_WHEA_HEADER *SubTable; 718 1.1.1.2.2.2 bouyer UINT32 Length = Table->Length; 719 1.1.1.2.2.2 bouyer UINT32 Offset = sizeof (ACPI_TABLE_ERST); 720 1.1.1.2.2.2 bouyer 721 1.1.1.2.2.2 bouyer 722 1.1.1.2.2.2 bouyer /* Main table */ 723 1.1.1.2.2.2 bouyer 724 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Length, 0, Table, 0, AcpiDmTableInfoErst); 725 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 726 1.1.1.2.2.2 bouyer { 727 1.1.1.2.2.2 bouyer return; 728 1.1.1.2.2.2 bouyer } 729 1.1.1.2.2.2 bouyer 730 1.1.1.2.2.2 bouyer /* Sub-tables */ 731 1.1.1.2.2.2 bouyer 732 1.1.1.2.2.2 bouyer SubTable = ACPI_ADD_PTR (ACPI_WHEA_HEADER, Table, Offset); 733 1.1.1.2.2.2 bouyer while (Offset < Table->Length) 734 1.1.1.2.2.2 bouyer { 735 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n"); 736 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Length, Offset, SubTable, 737 1.1.1.2.2.2 bouyer sizeof (ACPI_WHEA_HEADER), AcpiDmTableInfoErst0); 738 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 739 1.1.1.2.2.2 bouyer { 740 1.1.1.2.2.2 bouyer return; 741 1.1.1.2.2.2 bouyer } 742 1.1.1.2.2.2 bouyer 743 1.1.1.2.2.2 bouyer /* Point to next sub-table (each subtable is of fixed length) */ 744 1.1.1.2.2.2 bouyer 745 1.1.1.2.2.2 bouyer Offset += sizeof (ACPI_WHEA_HEADER); 746 1.1.1.2.2.2 bouyer SubTable = ACPI_ADD_PTR (ACPI_WHEA_HEADER, SubTable, 747 1.1.1.2.2.2 bouyer sizeof (ACPI_WHEA_HEADER)); 748 1.1.1.2.2.2 bouyer } 749 1.1.1.2.2.2 bouyer } 750 1.1.1.2.2.2 bouyer 751 1.1.1.2.2.2 bouyer 752 1.1.1.2.2.2 bouyer /******************************************************************************* 753 1.1.1.2.2.2 bouyer * 754 1.1.1.2.2.2 bouyer * FUNCTION: AcpiDmDumpHest 755 1.1.1.2.2.2 bouyer * 756 1.1.1.2.2.2 bouyer * PARAMETERS: Table - A HEST table 757 1.1.1.2.2.2 bouyer * 758 1.1.1.2.2.2 bouyer * RETURN: None 759 1.1.1.2.2.2 bouyer * 760 1.1.1.2.2.2 bouyer * DESCRIPTION: Format the contents of a HEST. This table type consists 761 1.1.1.2.2.2 bouyer * of an open-ended number of subtables. 762 1.1.1.2.2.2 bouyer * 763 1.1.1.2.2.2 bouyer ******************************************************************************/ 764 1.1.1.2.2.2 bouyer 765 1.1.1.2.2.2 bouyer void 766 1.1.1.2.2.2 bouyer AcpiDmDumpHest ( 767 1.1.1.2.2.2 bouyer ACPI_TABLE_HEADER *Table) 768 1.1.1.2.2.2 bouyer { 769 1.1.1.2.2.2 bouyer ACPI_STATUS Status; 770 1.1.1.2.2.2 bouyer ACPI_HEST_HEADER *SubTable; 771 1.1.1.2.2.2 bouyer UINT32 Length = Table->Length; 772 1.1.1.2.2.2 bouyer UINT32 Offset = sizeof (ACPI_TABLE_HEST); 773 1.1.1.2.2.2 bouyer ACPI_DMTABLE_INFO *InfoTable; 774 1.1.1.2.2.2 bouyer UINT32 SubTableLength; 775 1.1.1.2.2.2 bouyer UINT32 BankCount; 776 1.1.1.2.2.2 bouyer ACPI_HEST_IA_ERROR_BANK *BankTable; 777 1.1.1.2.2.2 bouyer 778 1.1.1.2.2.2 bouyer 779 1.1.1.2.2.2 bouyer /* Main table */ 780 1.1.1.2.2.2 bouyer 781 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Length, 0, Table, 0, AcpiDmTableInfoHest); 782 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 783 1.1.1.2.2.2 bouyer { 784 1.1.1.2.2.2 bouyer return; 785 1.1.1.2.2.2 bouyer } 786 1.1.1.2.2.2 bouyer 787 1.1.1.2.2.2 bouyer /* Sub-tables */ 788 1.1.1.2.2.2 bouyer 789 1.1.1.2.2.2 bouyer SubTable = ACPI_ADD_PTR (ACPI_HEST_HEADER, Table, Offset); 790 1.1.1.2.2.2 bouyer while (Offset < Table->Length) 791 1.1.1.2.2.2 bouyer { 792 1.1.1.2.2.2 bouyer BankCount = 0; 793 1.1.1.2.2.2 bouyer switch (SubTable->Type) 794 1.1.1.2.2.2 bouyer { 795 1.1.1.2.2.2 bouyer case ACPI_HEST_TYPE_IA32_CHECK: 796 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoHest0; 797 1.1.1.2.2.2 bouyer SubTableLength = sizeof (ACPI_HEST_IA_MACHINE_CHECK); 798 1.1.1.2.2.2 bouyer BankCount = (ACPI_CAST_PTR (ACPI_HEST_IA_MACHINE_CHECK, 799 1.1.1.2.2.2 bouyer SubTable))->NumHardwareBanks; 800 1.1.1.2.2.2 bouyer break; 801 1.1.1.2.2.2 bouyer 802 1.1.1.2.2.2 bouyer case ACPI_HEST_TYPE_IA32_CORRECTED_CHECK: 803 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoHest1; 804 1.1.1.2.2.2 bouyer SubTableLength = sizeof (ACPI_HEST_IA_CORRECTED); 805 1.1.1.2.2.2 bouyer BankCount = (ACPI_CAST_PTR (ACPI_HEST_IA_CORRECTED, 806 1.1.1.2.2.2 bouyer SubTable))->NumHardwareBanks; 807 1.1.1.2.2.2 bouyer break; 808 1.1.1.2.2.2 bouyer 809 1.1.1.2.2.2 bouyer case ACPI_HEST_TYPE_IA32_NMI: 810 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoHest2; 811 1.1.1.2.2.2 bouyer SubTableLength = sizeof (ACPI_HEST_IA_NMI); 812 1.1.1.2.2.2 bouyer break; 813 1.1.1.2.2.2 bouyer 814 1.1.1.2.2.2 bouyer case ACPI_HEST_TYPE_AER_ROOT_PORT: 815 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoHest6; 816 1.1.1.2.2.2 bouyer SubTableLength = sizeof (ACPI_HEST_AER_ROOT); 817 1.1.1.2.2.2 bouyer break; 818 1.1.1.2.2.2 bouyer 819 1.1.1.2.2.2 bouyer case ACPI_HEST_TYPE_AER_ENDPOINT: 820 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoHest7; 821 1.1.1.2.2.2 bouyer SubTableLength = sizeof (ACPI_HEST_AER); 822 1.1.1.2.2.2 bouyer break; 823 1.1.1.2.2.2 bouyer 824 1.1.1.2.2.2 bouyer case ACPI_HEST_TYPE_AER_BRIDGE: 825 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoHest8; 826 1.1.1.2.2.2 bouyer SubTableLength = sizeof (ACPI_HEST_AER_BRIDGE); 827 1.1.1.2.2.2 bouyer break; 828 1.1.1.2.2.2 bouyer 829 1.1.1.2.2.2 bouyer case ACPI_HEST_TYPE_GENERIC_ERROR: 830 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoHest9; 831 1.1.1.2.2.2 bouyer SubTableLength = sizeof (ACPI_HEST_GENERIC); 832 1.1.1.2.2.2 bouyer break; 833 1.1.1.2.2.2 bouyer 834 1.1.1.2.2.2 bouyer default: 835 1.1.1.2.2.2 bouyer /* Cannot continue on unknown type - no length */ 836 1.1.1.2.2.2 bouyer 837 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n**** Unknown HEST sub-table type 0x%X\n", SubTable->Type); 838 1.1.1.2.2.2 bouyer return; 839 1.1.1.2.2.2 bouyer } 840 1.1.1.2.2.2 bouyer 841 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n"); 842 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Length, Offset, SubTable, 843 1.1.1.2.2.2 bouyer SubTableLength, InfoTable); 844 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 845 1.1.1.2.2.2 bouyer { 846 1.1.1.2.2.2 bouyer return; 847 1.1.1.2.2.2 bouyer } 848 1.1.1.2.2.2 bouyer 849 1.1.1.2.2.2 bouyer /* Point to end of current subtable (each subtable above is of fixed length) */ 850 1.1.1.2.2.2 bouyer 851 1.1.1.2.2.2 bouyer Offset += SubTableLength; 852 1.1.1.2.2.2 bouyer 853 1.1.1.2.2.2 bouyer /* If there are any (fixed-length) Error Banks from above, dump them now */ 854 1.1.1.2.2.2 bouyer 855 1.1.1.2.2.2 bouyer if (BankCount) 856 1.1.1.2.2.2 bouyer { 857 1.1.1.2.2.2 bouyer BankTable = ACPI_ADD_PTR (ACPI_HEST_IA_ERROR_BANK, SubTable, SubTableLength); 858 1.1.1.2.2.2 bouyer SubTableLength += BankCount * sizeof (ACPI_HEST_IA_ERROR_BANK); 859 1.1.1.2.2.2 bouyer 860 1.1.1.2.2.2 bouyer while (BankCount) 861 1.1.1.2.2.2 bouyer { 862 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n"); 863 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Length, Offset, BankTable, 864 1.1.1.2.2.2 bouyer sizeof (ACPI_HEST_IA_ERROR_BANK), AcpiDmTableInfoHestBank); 865 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 866 1.1.1.2.2.2 bouyer { 867 1.1.1.2.2.2 bouyer return; 868 1.1.1.2.2.2 bouyer } 869 1.1.1.2.2.2 bouyer Offset += sizeof (ACPI_HEST_IA_ERROR_BANK); 870 1.1.1.2.2.2 bouyer BankTable++; 871 1.1.1.2.2.2 bouyer BankCount--; 872 1.1.1.2.2.2 bouyer } 873 1.1.1.2.2.2 bouyer } 874 1.1.1.2.2.2 bouyer 875 1.1.1.2.2.2 bouyer /* Point to next sub-table */ 876 1.1.1.2.2.2 bouyer 877 1.1.1.2.2.2 bouyer SubTable = ACPI_ADD_PTR (ACPI_HEST_HEADER, SubTable, SubTableLength); 878 1.1.1.2.2.2 bouyer } 879 1.1.1.2.2.2 bouyer } 880 1.1.1.2.2.2 bouyer 881 1.1.1.2.2.2 bouyer 882 1.1.1.2.2.2 bouyer /******************************************************************************* 883 1.1.1.2.2.2 bouyer * 884 1.1.1.2.2.2 bouyer * FUNCTION: AcpiDmDumpIvrs 885 1.1.1.2.2.2 bouyer * 886 1.1.1.2.2.2 bouyer * PARAMETERS: Table - A IVRS table 887 1.1.1.2.2.2 bouyer * 888 1.1.1.2.2.2 bouyer * RETURN: None 889 1.1.1.2.2.2 bouyer * 890 1.1.1.2.2.2 bouyer * DESCRIPTION: Format the contents of a IVRS 891 1.1.1.2.2.2 bouyer * 892 1.1.1.2.2.2 bouyer ******************************************************************************/ 893 1.1.1.2.2.2 bouyer 894 1.1.1.2.2.2 bouyer static UINT8 EntrySizes[] = {4,8,16,32}; 895 1.1.1.2.2.2 bouyer 896 1.1.1.2.2.2 bouyer void 897 1.1.1.2.2.2 bouyer AcpiDmDumpIvrs ( 898 1.1.1.2.2.2 bouyer ACPI_TABLE_HEADER *Table) 899 1.1.1.2.2.2 bouyer { 900 1.1.1.2.2.2 bouyer ACPI_STATUS Status; 901 1.1.1.2.2.2 bouyer UINT32 Offset = sizeof (ACPI_TABLE_IVRS); 902 1.1.1.2.2.2 bouyer UINT32 EntryOffset; 903 1.1.1.2.2.2 bouyer UINT32 EntryLength; 904 1.1.1.2.2.2 bouyer UINT32 EntryType; 905 1.1.1.2.2.2 bouyer ACPI_IVRS_DE_HEADER *DeviceEntry; 906 1.1.1.2.2.2 bouyer ACPI_IVRS_HEADER *SubTable; 907 1.1.1.2.2.2 bouyer ACPI_DMTABLE_INFO *InfoTable; 908 1.1.1.2.2.2 bouyer 909 1.1.1.2.2.2 bouyer 910 1.1.1.2.2.2 bouyer /* Main table */ 911 1.1.1.2.2.2 bouyer 912 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Table->Length, 0, Table, 0, AcpiDmTableInfoIvrs); 913 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 914 1.1.1.2.2.2 bouyer { 915 1.1.1.2.2.2 bouyer return; 916 1.1.1.2.2.2 bouyer } 917 1.1.1.2.2.2 bouyer 918 1.1.1.2.2.2 bouyer /* Sub-tables */ 919 1.1.1.2.2.2 bouyer 920 1.1.1.2.2.2 bouyer SubTable = ACPI_ADD_PTR (ACPI_IVRS_HEADER, Table, Offset); 921 1.1.1.2.2.2 bouyer while (Offset < Table->Length) 922 1.1.1.2.2.2 bouyer { 923 1.1.1.2.2.2 bouyer /* Common sub-table header */ 924 1.1.1.2.2.2 bouyer 925 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n"); 926 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Table->Length, Offset, SubTable, 927 1.1.1.2.2.2 bouyer SubTable->Length, AcpiDmTableInfoIvrsHdr); 928 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 929 1.1.1.2.2.2 bouyer { 930 1.1.1.2.2.2 bouyer return; 931 1.1.1.2.2.2 bouyer } 932 1.1.1.2.2.2 bouyer 933 1.1.1.2.2.2 bouyer switch (SubTable->Type) 934 1.1.1.2.2.2 bouyer { 935 1.1.1.2.2.2 bouyer case ACPI_IVRS_TYPE_HARDWARE: 936 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoIvrs0; 937 1.1.1.2.2.2 bouyer break; 938 1.1.1.2.2.2 bouyer case ACPI_IVRS_TYPE_MEMORY1: 939 1.1.1.2.2.2 bouyer case ACPI_IVRS_TYPE_MEMORY2: 940 1.1.1.2.2.2 bouyer case ACPI_IVRS_TYPE_MEMORY3: 941 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoIvrs1; 942 1.1.1.2.2.2 bouyer break; 943 1.1.1.2.2.2 bouyer default: 944 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n**** Unknown IVRS sub-table type 0x%X\n", 945 1.1.1.2.2.2 bouyer SubTable->Type); 946 1.1.1.2.2.2 bouyer 947 1.1.1.2.2.2 bouyer /* Attempt to continue */ 948 1.1.1.2.2.2 bouyer 949 1.1.1.2.2.2 bouyer if (!SubTable->Length) 950 1.1.1.2.2.2 bouyer { 951 1.1.1.2.2.2 bouyer AcpiOsPrintf ("Invalid zero length subtable\n"); 952 1.1.1.2.2.2 bouyer return; 953 1.1.1.2.2.2 bouyer } 954 1.1.1.2.2.2 bouyer goto NextSubTable; 955 1.1.1.2.2.2 bouyer } 956 1.1.1.2.2.2 bouyer 957 1.1.1.2.2.2 bouyer /* Dump the subtable */ 958 1.1.1.2.2.2 bouyer 959 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n"); 960 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Table->Length, Offset, SubTable, 961 1.1.1.2.2.2 bouyer SubTable->Length, InfoTable); 962 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 963 1.1.1.2.2.2 bouyer { 964 1.1.1.2.2.2 bouyer return; 965 1.1.1.2.2.2 bouyer } 966 1.1.1.2.2.2 bouyer 967 1.1.1.2.2.2 bouyer /* The hardware subtable can contain multiple device entries */ 968 1.1.1.2.2.2 bouyer 969 1.1.1.2.2.2 bouyer if (SubTable->Type == ACPI_IVRS_TYPE_HARDWARE) 970 1.1.1.2.2.2 bouyer { 971 1.1.1.2.2.2 bouyer EntryOffset = Offset + sizeof (ACPI_IVRS_HARDWARE); 972 1.1.1.2.2.2 bouyer DeviceEntry = ACPI_ADD_PTR (ACPI_IVRS_DE_HEADER, SubTable, 973 1.1.1.2.2.2 bouyer sizeof (ACPI_IVRS_HARDWARE)); 974 1.1.1.2.2.2 bouyer 975 1.1.1.2.2.2 bouyer while (EntryOffset < (Offset + SubTable->Length)) 976 1.1.1.2.2.2 bouyer { 977 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n"); 978 1.1.1.2.2.2 bouyer /* 979 1.1.1.2.2.2 bouyer * Upper 2 bits of Type encode the length of the device entry 980 1.1.1.2.2.2 bouyer * 981 1.1.1.2.2.2 bouyer * 00 = 4 byte 982 1.1.1.2.2.2 bouyer * 01 = 8 byte 983 1.1.1.2.2.2 bouyer * 10 = 16 byte - currently no entries defined 984 1.1.1.2.2.2 bouyer * 11 = 32 byte - currently no entries defined 985 1.1.1.2.2.2 bouyer */ 986 1.1.1.2.2.2 bouyer EntryType = DeviceEntry->Type; 987 1.1.1.2.2.2 bouyer EntryLength = EntrySizes [EntryType >> 6]; 988 1.1.1.2.2.2 bouyer 989 1.1.1.2.2.2 bouyer switch (EntryType) 990 1.1.1.2.2.2 bouyer { 991 1.1.1.2.2.2 bouyer /* 4-byte device entries */ 992 1.1.1.2.2.2 bouyer 993 1.1.1.2.2.2 bouyer case ACPI_IVRS_TYPE_PAD4: 994 1.1.1.2.2.2 bouyer case ACPI_IVRS_TYPE_ALL: 995 1.1.1.2.2.2 bouyer case ACPI_IVRS_TYPE_SELECT: 996 1.1.1.2.2.2 bouyer case ACPI_IVRS_TYPE_START: 997 1.1.1.2.2.2 bouyer case ACPI_IVRS_TYPE_END: 998 1.1.1.2.2.2 bouyer 999 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoIvrs4; 1000 1.1.1.2.2.2 bouyer break; 1001 1.1.1.2.2.2 bouyer 1002 1.1.1.2.2.2 bouyer /* 8-byte entries, type A */ 1003 1.1.1.2.2.2 bouyer 1004 1.1.1.2.2.2 bouyer case ACPI_IVRS_TYPE_ALIAS_SELECT: 1005 1.1.1.2.2.2 bouyer case ACPI_IVRS_TYPE_ALIAS_START: 1006 1.1.1.2.2.2 bouyer 1007 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoIvrs8a; 1008 1.1.1.2.2.2 bouyer break; 1009 1.1.1.2.2.2 bouyer 1010 1.1.1.2.2.2 bouyer /* 8-byte entries, type B */ 1011 1.1.1.2.2.2 bouyer 1012 1.1.1.2.2.2 bouyer case ACPI_IVRS_TYPE_PAD8: 1013 1.1.1.2.2.2 bouyer case ACPI_IVRS_TYPE_EXT_SELECT: 1014 1.1.1.2.2.2 bouyer case ACPI_IVRS_TYPE_EXT_START: 1015 1.1.1.2.2.2 bouyer 1016 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoIvrs8b; 1017 1.1.1.2.2.2 bouyer break; 1018 1.1.1.2.2.2 bouyer 1019 1.1.1.2.2.2 bouyer /* 8-byte entries, type C */ 1020 1.1.1.2.2.2 bouyer 1021 1.1.1.2.2.2 bouyer case ACPI_IVRS_TYPE_SPECIAL: 1022 1.1.1.2.2.2 bouyer 1023 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoIvrs8c; 1024 1.1.1.2.2.2 bouyer break; 1025 1.1.1.2.2.2 bouyer 1026 1.1.1.2.2.2 bouyer default: 1027 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoIvrs4; 1028 1.1.1.2.2.2 bouyer AcpiOsPrintf ( 1029 1.1.1.2.2.2 bouyer "\n**** Unknown IVRS device entry type/length: " 1030 1.1.1.2.2.2 bouyer "0x%.2X/0x%X at offset 0x%.4X: (header below)\n", 1031 1.1.1.2.2.2 bouyer EntryType, EntryLength, EntryOffset); 1032 1.1.1.2.2.2 bouyer break; 1033 1.1.1.2.2.2 bouyer } 1034 1.1.1.2.2.2 bouyer 1035 1.1.1.2.2.2 bouyer /* Dump the Device Entry */ 1036 1.1.1.2.2.2 bouyer 1037 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Table->Length, EntryOffset, 1038 1.1.1.2.2.2 bouyer DeviceEntry, EntryLength, InfoTable); 1039 1.1.1.2.2.2 bouyer 1040 1.1.1.2.2.2 bouyer EntryOffset += EntryLength; 1041 1.1.1.2.2.2 bouyer DeviceEntry = ACPI_ADD_PTR (ACPI_IVRS_DE_HEADER, DeviceEntry, 1042 1.1.1.2.2.2 bouyer EntryLength); 1043 1.1.1.2.2.2 bouyer } 1044 1.1.1.2.2.2 bouyer } 1045 1.1.1.2.2.2 bouyer 1046 1.1.1.2.2.2 bouyer NextSubTable: 1047 1.1.1.2.2.2 bouyer /* Point to next sub-table */ 1048 1.1.1.2.2.2 bouyer 1049 1.1.1.2.2.2 bouyer Offset += SubTable->Length; 1050 1.1.1.2.2.2 bouyer SubTable = ACPI_ADD_PTR (ACPI_IVRS_HEADER, SubTable, SubTable->Length); 1051 1.1.1.2.2.2 bouyer } 1052 1.1.1.2.2.2 bouyer } 1053 1.1.1.2.2.2 bouyer 1054 1.1.1.2.2.2 bouyer 1055 1.1.1.2.2.2 bouyer /******************************************************************************* 1056 1.1.1.2.2.2 bouyer * 1057 1.1.1.2.2.2 bouyer * FUNCTION: AcpiDmDumpMadt 1058 1.1.1.2.2.2 bouyer * 1059 1.1.1.2.2.2 bouyer * PARAMETERS: Table - A MADT table 1060 1.1.1.2.2.2 bouyer * 1061 1.1.1.2.2.2 bouyer * RETURN: None 1062 1.1.1.2.2.2 bouyer * 1063 1.1.1.2.2.2 bouyer * DESCRIPTION: Format the contents of a MADT. This table type consists 1064 1.1.1.2.2.2 bouyer * of an open-ended number of subtables. 1065 1.1.1.2.2.2 bouyer * 1066 1.1.1.2.2.2 bouyer ******************************************************************************/ 1067 1.1.1.2.2.2 bouyer 1068 1.1.1.2.2.2 bouyer void 1069 1.1.1.2.2.2 bouyer AcpiDmDumpMadt ( 1070 1.1.1.2.2.2 bouyer ACPI_TABLE_HEADER *Table) 1071 1.1.1.2.2.2 bouyer { 1072 1.1.1.2.2.2 bouyer ACPI_STATUS Status; 1073 1.1.1.2.2.2 bouyer ACPI_SUBTABLE_HEADER *SubTable; 1074 1.1.1.2.2.2 bouyer UINT32 Length = Table->Length; 1075 1.1.1.2.2.2 bouyer UINT32 Offset = sizeof (ACPI_TABLE_MADT); 1076 1.1.1.2.2.2 bouyer ACPI_DMTABLE_INFO *InfoTable; 1077 1.1.1.2.2.2 bouyer 1078 1.1.1.2.2.2 bouyer 1079 1.1.1.2.2.2 bouyer /* Main table */ 1080 1.1.1.2.2.2 bouyer 1081 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Length, 0, Table, 0, AcpiDmTableInfoMadt); 1082 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 1083 1.1.1.2.2.2 bouyer { 1084 1.1.1.2.2.2 bouyer return; 1085 1.1.1.2.2.2 bouyer } 1086 1.1.1.2.2.2 bouyer 1087 1.1.1.2.2.2 bouyer /* Sub-tables */ 1088 1.1.1.2.2.2 bouyer 1089 1.1.1.2.2.2 bouyer SubTable = ACPI_ADD_PTR (ACPI_SUBTABLE_HEADER, Table, Offset); 1090 1.1.1.2.2.2 bouyer while (Offset < Table->Length) 1091 1.1.1.2.2.2 bouyer { 1092 1.1.1.2.2.2 bouyer /* Common sub-table header */ 1093 1.1.1.2.2.2 bouyer 1094 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n"); 1095 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Length, Offset, SubTable, 1096 1.1.1.2.2.2 bouyer SubTable->Length, AcpiDmTableInfoMadtHdr); 1097 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 1098 1.1.1.2.2.2 bouyer { 1099 1.1.1.2.2.2 bouyer return; 1100 1.1.1.2.2.2 bouyer } 1101 1.1.1.2.2.2 bouyer 1102 1.1.1.2.2.2 bouyer switch (SubTable->Type) 1103 1.1.1.2.2.2 bouyer { 1104 1.1.1.2.2.2 bouyer case ACPI_MADT_TYPE_LOCAL_APIC: 1105 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoMadt0; 1106 1.1.1.2.2.2 bouyer break; 1107 1.1.1.2.2.2 bouyer case ACPI_MADT_TYPE_IO_APIC: 1108 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoMadt1; 1109 1.1.1.2.2.2 bouyer break; 1110 1.1.1.2.2.2 bouyer case ACPI_MADT_TYPE_INTERRUPT_OVERRIDE: 1111 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoMadt2; 1112 1.1.1.2.2.2 bouyer break; 1113 1.1.1.2.2.2 bouyer case ACPI_MADT_TYPE_NMI_SOURCE: 1114 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoMadt3; 1115 1.1.1.2.2.2 bouyer break; 1116 1.1.1.2.2.2 bouyer case ACPI_MADT_TYPE_LOCAL_APIC_NMI: 1117 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoMadt4; 1118 1.1.1.2.2.2 bouyer break; 1119 1.1.1.2.2.2 bouyer case ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE: 1120 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoMadt5; 1121 1.1.1.2.2.2 bouyer break; 1122 1.1.1.2.2.2 bouyer case ACPI_MADT_TYPE_IO_SAPIC: 1123 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoMadt6; 1124 1.1.1.2.2.2 bouyer break; 1125 1.1.1.2.2.2 bouyer case ACPI_MADT_TYPE_LOCAL_SAPIC: 1126 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoMadt7; 1127 1.1.1.2.2.2 bouyer break; 1128 1.1.1.2.2.2 bouyer case ACPI_MADT_TYPE_INTERRUPT_SOURCE: 1129 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoMadt8; 1130 1.1.1.2.2.2 bouyer break; 1131 1.1.1.2.2.2 bouyer case ACPI_MADT_TYPE_LOCAL_X2APIC: 1132 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoMadt9; 1133 1.1.1.2.2.2 bouyer break; 1134 1.1.1.2.2.2 bouyer case ACPI_MADT_TYPE_LOCAL_X2APIC_NMI: 1135 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoMadt10; 1136 1.1.1.2.2.2 bouyer break; 1137 1.1.1.2.2.2 bouyer default: 1138 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n**** Unknown MADT sub-table type 0x%X\n\n", SubTable->Type); 1139 1.1.1.2.2.2 bouyer 1140 1.1.1.2.2.2 bouyer /* Attempt to continue */ 1141 1.1.1.2.2.2 bouyer 1142 1.1.1.2.2.2 bouyer if (!SubTable->Length) 1143 1.1.1.2.2.2 bouyer { 1144 1.1.1.2.2.2 bouyer AcpiOsPrintf ("Invalid zero length subtable\n"); 1145 1.1.1.2.2.2 bouyer return; 1146 1.1.1.2.2.2 bouyer } 1147 1.1.1.2.2.2 bouyer goto NextSubTable; 1148 1.1.1.2.2.2 bouyer } 1149 1.1.1.2.2.2 bouyer 1150 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Length, Offset, SubTable, 1151 1.1.1.2.2.2 bouyer SubTable->Length, InfoTable); 1152 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 1153 1.1.1.2.2.2 bouyer { 1154 1.1.1.2.2.2 bouyer return; 1155 1.1.1.2.2.2 bouyer } 1156 1.1.1.2.2.2 bouyer 1157 1.1.1.2.2.2 bouyer NextSubTable: 1158 1.1.1.2.2.2 bouyer /* Point to next sub-table */ 1159 1.1.1.2.2.2 bouyer 1160 1.1.1.2.2.2 bouyer Offset += SubTable->Length; 1161 1.1.1.2.2.2 bouyer SubTable = ACPI_ADD_PTR (ACPI_SUBTABLE_HEADER, SubTable, SubTable->Length); 1162 1.1.1.2.2.2 bouyer } 1163 1.1.1.2.2.2 bouyer } 1164 1.1.1.2.2.2 bouyer 1165 1.1.1.2.2.2 bouyer 1166 1.1.1.2.2.2 bouyer /******************************************************************************* 1167 1.1.1.2.2.2 bouyer * 1168 1.1.1.2.2.2 bouyer * FUNCTION: AcpiDmDumpMcfg 1169 1.1.1.2.2.2 bouyer * 1170 1.1.1.2.2.2 bouyer * PARAMETERS: Table - A MCFG Table 1171 1.1.1.2.2.2 bouyer * 1172 1.1.1.2.2.2 bouyer * RETURN: None 1173 1.1.1.2.2.2 bouyer * 1174 1.1.1.2.2.2 bouyer * DESCRIPTION: Format the contents of a MCFG table 1175 1.1.1.2.2.2 bouyer * 1176 1.1.1.2.2.2 bouyer ******************************************************************************/ 1177 1.1.1.2.2.2 bouyer 1178 1.1.1.2.2.2 bouyer void 1179 1.1.1.2.2.2 bouyer AcpiDmDumpMcfg ( 1180 1.1.1.2.2.2 bouyer ACPI_TABLE_HEADER *Table) 1181 1.1.1.2.2.2 bouyer { 1182 1.1.1.2.2.2 bouyer ACPI_STATUS Status; 1183 1.1.1.2.2.2 bouyer UINT32 Offset = sizeof (ACPI_TABLE_MCFG); 1184 1.1.1.2.2.2 bouyer ACPI_MCFG_ALLOCATION *SubTable; 1185 1.1.1.2.2.2 bouyer 1186 1.1.1.2.2.2 bouyer 1187 1.1.1.2.2.2 bouyer /* Main table */ 1188 1.1.1.2.2.2 bouyer 1189 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Table->Length, 0, Table, 0, AcpiDmTableInfoMcfg); 1190 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 1191 1.1.1.2.2.2 bouyer { 1192 1.1.1.2.2.2 bouyer return; 1193 1.1.1.2.2.2 bouyer } 1194 1.1.1.2.2.2 bouyer 1195 1.1.1.2.2.2 bouyer /* Sub-tables */ 1196 1.1.1.2.2.2 bouyer 1197 1.1.1.2.2.2 bouyer SubTable = ACPI_ADD_PTR (ACPI_MCFG_ALLOCATION, Table, Offset); 1198 1.1.1.2.2.2 bouyer while (Offset < Table->Length) 1199 1.1.1.2.2.2 bouyer { 1200 1.1.1.2.2.2 bouyer if (Offset + sizeof (ACPI_MCFG_ALLOCATION) > Table->Length) 1201 1.1.1.2.2.2 bouyer { 1202 1.1.1.2.2.2 bouyer AcpiOsPrintf ("Warning: there are %u invalid trailing bytes\n", 1203 1.1.1.2.2.2 bouyer sizeof (ACPI_MCFG_ALLOCATION) - (Offset - Table->Length)); 1204 1.1.1.2.2.2 bouyer return; 1205 1.1.1.2.2.2 bouyer } 1206 1.1.1.2.2.2 bouyer 1207 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n"); 1208 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Table->Length, Offset, SubTable, 1209 1.1.1.2.2.2 bouyer sizeof (ACPI_MCFG_ALLOCATION), AcpiDmTableInfoMcfg0); 1210 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 1211 1.1.1.2.2.2 bouyer { 1212 1.1.1.2.2.2 bouyer return; 1213 1.1.1.2.2.2 bouyer } 1214 1.1.1.2.2.2 bouyer 1215 1.1.1.2.2.2 bouyer /* Point to next sub-table (each subtable is of fixed length) */ 1216 1.1.1.2.2.2 bouyer 1217 1.1.1.2.2.2 bouyer Offset += sizeof (ACPI_MCFG_ALLOCATION); 1218 1.1.1.2.2.2 bouyer SubTable = ACPI_ADD_PTR (ACPI_MCFG_ALLOCATION, SubTable, 1219 1.1.1.2.2.2 bouyer sizeof (ACPI_MCFG_ALLOCATION)); 1220 1.1.1.2.2.2 bouyer } 1221 1.1.1.2.2.2 bouyer } 1222 1.1.1.2.2.2 bouyer 1223 1.1.1.2.2.2 bouyer 1224 1.1.1.2.2.2 bouyer /******************************************************************************* 1225 1.1.1.2.2.2 bouyer * 1226 1.1.1.2.2.2 bouyer * FUNCTION: AcpiDmDumpMsct 1227 1.1.1.2.2.2 bouyer * 1228 1.1.1.2.2.2 bouyer * PARAMETERS: Table - A MSCT table 1229 1.1.1.2.2.2 bouyer * 1230 1.1.1.2.2.2 bouyer * RETURN: None 1231 1.1.1.2.2.2 bouyer * 1232 1.1.1.2.2.2 bouyer * DESCRIPTION: Format the contents of a MSCT 1233 1.1.1.2.2.2 bouyer * 1234 1.1.1.2.2.2 bouyer ******************************************************************************/ 1235 1.1.1.2.2.2 bouyer 1236 1.1.1.2.2.2 bouyer void 1237 1.1.1.2.2.2 bouyer AcpiDmDumpMsct ( 1238 1.1.1.2.2.2 bouyer ACPI_TABLE_HEADER *Table) 1239 1.1.1.2.2.2 bouyer { 1240 1.1.1.2.2.2 bouyer ACPI_STATUS Status; 1241 1.1.1.2.2.2 bouyer UINT32 Offset = sizeof (ACPI_TABLE_MSCT); 1242 1.1.1.2.2.2 bouyer ACPI_MSCT_PROXIMITY *SubTable; 1243 1.1.1.2.2.2 bouyer 1244 1.1.1.2.2.2 bouyer 1245 1.1.1.2.2.2 bouyer /* Main table */ 1246 1.1.1.2.2.2 bouyer 1247 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Table->Length, 0, Table, 0, AcpiDmTableInfoMsct); 1248 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 1249 1.1.1.2.2.2 bouyer { 1250 1.1.1.2.2.2 bouyer return; 1251 1.1.1.2.2.2 bouyer } 1252 1.1.1.2.2.2 bouyer 1253 1.1.1.2.2.2 bouyer /* Sub-tables */ 1254 1.1.1.2.2.2 bouyer 1255 1.1.1.2.2.2 bouyer SubTable = ACPI_ADD_PTR (ACPI_MSCT_PROXIMITY, Table, Offset); 1256 1.1.1.2.2.2 bouyer while (Offset < Table->Length) 1257 1.1.1.2.2.2 bouyer { 1258 1.1.1.2.2.2 bouyer /* Common sub-table header */ 1259 1.1.1.2.2.2 bouyer 1260 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n"); 1261 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Table->Length, Offset, SubTable, 1262 1.1.1.2.2.2 bouyer sizeof (ACPI_MSCT_PROXIMITY), AcpiDmTableInfoMsct0); 1263 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 1264 1.1.1.2.2.2 bouyer { 1265 1.1.1.2.2.2 bouyer return; 1266 1.1.1.2.2.2 bouyer } 1267 1.1.1.2.2.2 bouyer 1268 1.1.1.2.2.2 bouyer /* Point to next sub-table */ 1269 1.1.1.2.2.2 bouyer 1270 1.1.1.2.2.2 bouyer Offset += sizeof (ACPI_MSCT_PROXIMITY); 1271 1.1.1.2.2.2 bouyer SubTable = ACPI_ADD_PTR (ACPI_MSCT_PROXIMITY, SubTable, sizeof (ACPI_MSCT_PROXIMITY)); 1272 1.1.1.2.2.2 bouyer } 1273 1.1.1.2.2.2 bouyer } 1274 1.1.1.2.2.2 bouyer 1275 1.1.1.2.2.2 bouyer 1276 1.1.1.2.2.2 bouyer /******************************************************************************* 1277 1.1.1.2.2.2 bouyer * 1278 1.1.1.2.2.2 bouyer * FUNCTION: AcpiDmDumpSlit 1279 1.1.1.2.2.2 bouyer * 1280 1.1.1.2.2.2 bouyer * PARAMETERS: Table - An SLIT 1281 1.1.1.2.2.2 bouyer * 1282 1.1.1.2.2.2 bouyer * RETURN: None 1283 1.1.1.2.2.2 bouyer * 1284 1.1.1.2.2.2 bouyer * DESCRIPTION: Format the contents of a SLIT 1285 1.1.1.2.2.2 bouyer * 1286 1.1.1.2.2.2 bouyer ******************************************************************************/ 1287 1.1.1.2.2.2 bouyer 1288 1.1.1.2.2.2 bouyer void 1289 1.1.1.2.2.2 bouyer AcpiDmDumpSlit ( 1290 1.1.1.2.2.2 bouyer ACPI_TABLE_HEADER *Table) 1291 1.1.1.2.2.2 bouyer { 1292 1.1.1.2.2.2 bouyer ACPI_STATUS Status; 1293 1.1.1.2.2.2 bouyer UINT32 Offset; 1294 1.1.1.2.2.2 bouyer UINT8 *Row; 1295 1.1.1.2.2.2 bouyer UINT32 Localities; 1296 1.1.1.2.2.2 bouyer UINT32 i; 1297 1.1.1.2.2.2 bouyer UINT32 j; 1298 1.1.1.2.2.2 bouyer 1299 1.1.1.2.2.2 bouyer 1300 1.1.1.2.2.2 bouyer /* Main table */ 1301 1.1.1.2.2.2 bouyer 1302 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Table->Length, 0, Table, 0, AcpiDmTableInfoSlit); 1303 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 1304 1.1.1.2.2.2 bouyer { 1305 1.1.1.2.2.2 bouyer return; 1306 1.1.1.2.2.2 bouyer } 1307 1.1.1.2.2.2 bouyer 1308 1.1.1.2.2.2 bouyer /* Display the Locality NxN Matrix */ 1309 1.1.1.2.2.2 bouyer 1310 1.1.1.2.2.2 bouyer Localities = (UINT32) ACPI_CAST_PTR (ACPI_TABLE_SLIT, Table)->LocalityCount; 1311 1.1.1.2.2.2 bouyer Offset = ACPI_OFFSET (ACPI_TABLE_SLIT, Entry[0]); 1312 1.1.1.2.2.2 bouyer Row = (UINT8 *) ACPI_CAST_PTR (ACPI_TABLE_SLIT, Table)->Entry; 1313 1.1.1.2.2.2 bouyer 1314 1.1.1.2.2.2 bouyer for (i = 0; i < Localities; i++) 1315 1.1.1.2.2.2 bouyer { 1316 1.1.1.2.2.2 bouyer /* Display one row of the matrix */ 1317 1.1.1.2.2.2 bouyer 1318 1.1.1.2.2.2 bouyer AcpiDmLineHeader2 (Offset, Localities, "Locality", i); 1319 1.1.1.2.2.2 bouyer for (j = 0; j < Localities; j++) 1320 1.1.1.2.2.2 bouyer { 1321 1.1.1.2.2.2 bouyer /* Check for beyond EOT */ 1322 1.1.1.2.2.2 bouyer 1323 1.1.1.2.2.2 bouyer if (Offset >= Table->Length) 1324 1.1.1.2.2.2 bouyer { 1325 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n**** Not enough room in table for all localities\n"); 1326 1.1.1.2.2.2 bouyer return; 1327 1.1.1.2.2.2 bouyer } 1328 1.1.1.2.2.2 bouyer 1329 1.1.1.2.2.2 bouyer AcpiOsPrintf ("%2.2X", Row[j]); 1330 1.1.1.2.2.2 bouyer Offset++; 1331 1.1.1.2.2.2 bouyer 1332 1.1.1.2.2.2 bouyer /* Display up to 16 bytes per output row */ 1333 1.1.1.2.2.2 bouyer 1334 1.1.1.2.2.2 bouyer if ((j+1) < Localities) 1335 1.1.1.2.2.2 bouyer { 1336 1.1.1.2.2.2 bouyer AcpiOsPrintf (","); 1337 1.1.1.2.2.2 bouyer 1338 1.1.1.2.2.2 bouyer if (j && (((j+1) % 16) == 0)) 1339 1.1.1.2.2.2 bouyer { 1340 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n"); 1341 1.1.1.2.2.2 bouyer AcpiDmLineHeader (Offset, 0, ""); 1342 1.1.1.2.2.2 bouyer } 1343 1.1.1.2.2.2 bouyer } 1344 1.1.1.2.2.2 bouyer } 1345 1.1.1.2.2.2 bouyer 1346 1.1.1.2.2.2 bouyer /* Point to next row */ 1347 1.1.1.2.2.2 bouyer 1348 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n"); 1349 1.1.1.2.2.2 bouyer Row += Localities; 1350 1.1.1.2.2.2 bouyer } 1351 1.1.1.2.2.2 bouyer } 1352 1.1.1.2.2.2 bouyer 1353 1.1.1.2.2.2 bouyer 1354 1.1.1.2.2.2 bouyer /******************************************************************************* 1355 1.1.1.2.2.2 bouyer * 1356 1.1.1.2.2.2 bouyer * FUNCTION: AcpiDmDumpSrat 1357 1.1.1.2.2.2 bouyer * 1358 1.1.1.2.2.2 bouyer * PARAMETERS: Table - A SRAT table 1359 1.1.1.2.2.2 bouyer * 1360 1.1.1.2.2.2 bouyer * RETURN: None 1361 1.1.1.2.2.2 bouyer * 1362 1.1.1.2.2.2 bouyer * DESCRIPTION: Format the contents of a SRAT 1363 1.1.1.2.2.2 bouyer * 1364 1.1.1.2.2.2 bouyer ******************************************************************************/ 1365 1.1.1.2.2.2 bouyer 1366 1.1.1.2.2.2 bouyer void 1367 1.1.1.2.2.2 bouyer AcpiDmDumpSrat ( 1368 1.1.1.2.2.2 bouyer ACPI_TABLE_HEADER *Table) 1369 1.1.1.2.2.2 bouyer { 1370 1.1.1.2.2.2 bouyer ACPI_STATUS Status; 1371 1.1.1.2.2.2 bouyer UINT32 Offset = sizeof (ACPI_TABLE_SRAT); 1372 1.1.1.2.2.2 bouyer ACPI_SUBTABLE_HEADER *SubTable; 1373 1.1.1.2.2.2 bouyer ACPI_DMTABLE_INFO *InfoTable; 1374 1.1.1.2.2.2 bouyer 1375 1.1.1.2.2.2 bouyer 1376 1.1.1.2.2.2 bouyer /* Main table */ 1377 1.1.1.2.2.2 bouyer 1378 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Table->Length, 0, Table, 0, AcpiDmTableInfoSrat); 1379 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 1380 1.1.1.2.2.2 bouyer { 1381 1.1.1.2.2.2 bouyer return; 1382 1.1.1.2.2.2 bouyer } 1383 1.1.1.2.2.2 bouyer 1384 1.1.1.2.2.2 bouyer /* Sub-tables */ 1385 1.1.1.2.2.2 bouyer 1386 1.1.1.2.2.2 bouyer SubTable = ACPI_ADD_PTR (ACPI_SUBTABLE_HEADER, Table, Offset); 1387 1.1.1.2.2.2 bouyer while (Offset < Table->Length) 1388 1.1.1.2.2.2 bouyer { 1389 1.1.1.2.2.2 bouyer /* Common sub-table header */ 1390 1.1.1.2.2.2 bouyer 1391 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n"); 1392 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Table->Length, Offset, SubTable, 1393 1.1.1.2.2.2 bouyer SubTable->Length, AcpiDmTableInfoSratHdr); 1394 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 1395 1.1.1.2.2.2 bouyer { 1396 1.1.1.2.2.2 bouyer return; 1397 1.1.1.2.2.2 bouyer } 1398 1.1.1.2.2.2 bouyer 1399 1.1.1.2.2.2 bouyer switch (SubTable->Type) 1400 1.1.1.2.2.2 bouyer { 1401 1.1.1.2.2.2 bouyer case ACPI_SRAT_TYPE_CPU_AFFINITY: 1402 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoSrat0; 1403 1.1.1.2.2.2 bouyer break; 1404 1.1.1.2.2.2 bouyer case ACPI_SRAT_TYPE_MEMORY_AFFINITY: 1405 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoSrat1; 1406 1.1.1.2.2.2 bouyer break; 1407 1.1.1.2.2.2 bouyer case ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY: 1408 1.1.1.2.2.2 bouyer InfoTable = AcpiDmTableInfoSrat2; 1409 1.1.1.2.2.2 bouyer break; 1410 1.1.1.2.2.2 bouyer default: 1411 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n**** Unknown SRAT sub-table type 0x%X\n", SubTable->Type); 1412 1.1.1.2.2.2 bouyer 1413 1.1.1.2.2.2 bouyer /* Attempt to continue */ 1414 1.1.1.2.2.2 bouyer 1415 1.1.1.2.2.2 bouyer if (!SubTable->Length) 1416 1.1.1.2.2.2 bouyer { 1417 1.1.1.2.2.2 bouyer AcpiOsPrintf ("Invalid zero length subtable\n"); 1418 1.1.1.2.2.2 bouyer return; 1419 1.1.1.2.2.2 bouyer } 1420 1.1.1.2.2.2 bouyer goto NextSubTable; 1421 1.1.1.2.2.2 bouyer } 1422 1.1.1.2.2.2 bouyer 1423 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n"); 1424 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Table->Length, Offset, SubTable, 1425 1.1.1.2.2.2 bouyer SubTable->Length, InfoTable); 1426 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 1427 1.1.1.2.2.2 bouyer { 1428 1.1.1.2.2.2 bouyer return; 1429 1.1.1.2.2.2 bouyer } 1430 1.1.1.2.2.2 bouyer 1431 1.1.1.2.2.2 bouyer NextSubTable: 1432 1.1.1.2.2.2 bouyer /* Point to next sub-table */ 1433 1.1.1.2.2.2 bouyer 1434 1.1.1.2.2.2 bouyer Offset += SubTable->Length; 1435 1.1.1.2.2.2 bouyer SubTable = ACPI_ADD_PTR (ACPI_SUBTABLE_HEADER, SubTable, SubTable->Length); 1436 1.1.1.2.2.2 bouyer } 1437 1.1.1.2.2.2 bouyer } 1438 1.1.1.2.2.2 bouyer 1439 1.1.1.2.2.2 bouyer 1440 1.1.1.2.2.2 bouyer /******************************************************************************* 1441 1.1.1.2.2.2 bouyer * 1442 1.1.1.2.2.2 bouyer * FUNCTION: AcpiDmDumpWdat 1443 1.1.1.2.2.2 bouyer * 1444 1.1.1.2.2.2 bouyer * PARAMETERS: Table - A WDAT table 1445 1.1.1.2.2.2 bouyer * 1446 1.1.1.2.2.2 bouyer * RETURN: None 1447 1.1.1.2.2.2 bouyer * 1448 1.1.1.2.2.2 bouyer * DESCRIPTION: Format the contents of a WDAT 1449 1.1.1.2.2.2 bouyer * 1450 1.1.1.2.2.2 bouyer ******************************************************************************/ 1451 1.1.1.2.2.2 bouyer 1452 1.1.1.2.2.2 bouyer void 1453 1.1.1.2.2.2 bouyer AcpiDmDumpWdat ( 1454 1.1.1.2.2.2 bouyer ACPI_TABLE_HEADER *Table) 1455 1.1.1.2.2.2 bouyer { 1456 1.1.1.2.2.2 bouyer ACPI_STATUS Status; 1457 1.1.1.2.2.2 bouyer UINT32 Offset = sizeof (ACPI_TABLE_WDAT); 1458 1.1.1.2.2.2 bouyer ACPI_WDAT_ENTRY *SubTable; 1459 1.1.1.2.2.2 bouyer 1460 1.1.1.2.2.2 bouyer 1461 1.1.1.2.2.2 bouyer /* Main table */ 1462 1.1.1.2.2.2 bouyer 1463 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Table->Length, 0, Table, 0, AcpiDmTableInfoWdat); 1464 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 1465 1.1.1.2.2.2 bouyer { 1466 1.1.1.2.2.2 bouyer return; 1467 1.1.1.2.2.2 bouyer } 1468 1.1.1.2.2.2 bouyer 1469 1.1.1.2.2.2 bouyer /* Sub-tables */ 1470 1.1.1.2.2.2 bouyer 1471 1.1.1.2.2.2 bouyer SubTable = ACPI_ADD_PTR (ACPI_WDAT_ENTRY, Table, Offset); 1472 1.1.1.2.2.2 bouyer while (Offset < Table->Length) 1473 1.1.1.2.2.2 bouyer { 1474 1.1.1.2.2.2 bouyer /* Common sub-table header */ 1475 1.1.1.2.2.2 bouyer 1476 1.1.1.2.2.2 bouyer AcpiOsPrintf ("\n"); 1477 1.1.1.2.2.2 bouyer Status = AcpiDmDumpTable (Table->Length, Offset, SubTable, 1478 1.1.1.2.2.2 bouyer sizeof (ACPI_WDAT_ENTRY), AcpiDmTableInfoWdat0); 1479 1.1.1.2.2.2 bouyer if (ACPI_FAILURE (Status)) 1480 1.1.1.2.2.2 bouyer { 1481 1.1.1.2.2.2 bouyer return; 1482 1.1.1.2.2.2 bouyer } 1483 1.1.1.2.2.2 bouyer 1484 1.1.1.2.2.2 bouyer /* Point to next sub-table */ 1485 1.1.1.2.2.2 bouyer 1486 1.1.1.2.2.2 bouyer Offset += sizeof (ACPI_WDAT_ENTRY); 1487 1.1.1.2.2.2 bouyer SubTable = ACPI_ADD_PTR (ACPI_WDAT_ENTRY, SubTable, sizeof (ACPI_WDAT_ENTRY)); 1488 1.1.1.2.2.2 bouyer } 1489 1.1.1.2.2.2 bouyer } 1490
Indexes created Wed Oct 22 13:09:56 GMT 2025