dist/common/dmtbdump3.c

/******************************************************************************
 *
 * Module Name: dmtbdump3 - Dump ACPI data tables that contain no AML code
 *
 *****************************************************************************/

/*
 * Copyright (C) 2000 - 2023, Intel Corp.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */

#include "acpi.h"
#include "accommon.h"
#include "acdisasm.h"
#include "actables.h"

/* This module used for application-level code only */

#define _COMPONENT          ACPI_CA_DISASSEMBLER
        ACPI_MODULE_NAME    ("dmtbdump3")


/*******************************************************************************
 *
 * FUNCTION:    AcpiDmDumpSlic
 *
 * PARAMETERS:  Table               - A SLIC table
 *
 * RETURN:      None
 *
 * DESCRIPTION: Format the contents of a SLIC
 *
 ******************************************************************************/

void
AcpiDmDumpSlic (
    ACPI_TABLE_HEADER       *Table)
{

    (void) AcpiDmDumpTable (Table->Length, sizeof (ACPI_TABLE_HEADER),
        (void *) (Table + sizeof (*Table)),
        Table->Length - sizeof (*Table), AcpiDmTableInfoSlic);
}


/*******************************************************************************
 *
 * FUNCTION:    AcpiDmDumpSlit
 *
 * PARAMETERS:  Table               - An SLIT
 *
 * RETURN:      None
 *
 * DESCRIPTION: Format the contents of a SLIT
 *
 ******************************************************************************/

void
AcpiDmDumpSlit (
    ACPI_TABLE_HEADER       *Table)
{
    ACPI_STATUS             Status;
    UINT32                  Offset;
    UINT8                   *Row;
    UINT32                  Localities;
    UINT32                  i;
    UINT32                  j;


    /* Main table */

    Status = AcpiDmDumpTable (Table->Length, 0, Table, 0, AcpiDmTableInfoSlit);
    if (ACPI_FAILURE (Status))
    {
        return;
    }

    /* Display the Locality NxN Matrix */

    Localities = (UINT32) ACPI_CAST_PTR (ACPI_TABLE_SLIT, Table)->LocalityCount;
    Offset = ACPI_OFFSET (ACPI_TABLE_SLIT, Entry[0]);
    Row = (UINT8 *) ACPI_CAST_PTR (ACPI_TABLE_SLIT, Table)->Entry;

    for (i = 0; i < Localities; i++)
    {
        /* Display one row of the matrix */

        AcpiDmLineHeader2 (Offset, Localities, "Locality", i);
        for  (j = 0; j < Localities; j++)
        {
            /* Check for beyond EOT */

            if (Offset >= Table->Length)
            {
                AcpiOsPrintf (
                    "\n**** Not enough room in table for all localities\n");
                return;
            }

            AcpiOsPrintf ("%2.2X", Row[j]);
            Offset++;

            /* Display up to 16 bytes per output row */

            if ((j+1) < Localities)
            {
                AcpiOsPrintf (" ");

                if (j && (((j+1) % 16) == 0))
                {
                    AcpiOsPrintf ("\\\n"); /* With line continuation char */
                    AcpiDmLineHeader (Offset, 0, NULL);
                }
            }
        }

        /* Point to next row */

        AcpiOsPrintf ("\n");
        Row += Localities;
    }
}


/*******************************************************************************
 *
 * FUNCTION:    AcpiDmDumpSrat
 *
 * PARAMETERS:  Table               - A SRAT table
 *
 * RETURN:      None
 *
 * DESCRIPTION: Format the contents of a SRAT
 *
 ******************************************************************************/

void
AcpiDmDumpSrat (
    ACPI_TABLE_HEADER       *Table)
{
    ACPI_STATUS             Status;
    UINT32                  Offset = sizeof (ACPI_TABLE_SRAT);
    ACPI_SUBTABLE_HEADER    *Subtable;
    ACPI_DMTABLE_INFO       *InfoTable;


    /* Main table */

    Status = AcpiDmDumpTable (Table->Length, 0, Table, 0, AcpiDmTableInfoSrat);
    if (ACPI_FAILURE (Status))
    {
        return;
    }

    /* Subtables */

    Subtable = ACPI_ADD_PTR (ACPI_SUBTABLE_HEADER, Table, Offset);
    while (Offset < Table->Length)
    {
        /* Common subtable header */

        AcpiOsPrintf ("\n");
        Status = AcpiDmDumpTable (Table->Length, Offset, Subtable,
            Subtable->Length, AcpiDmTableInfoSratHdr);
        if (ACPI_FAILURE (Status))
        {
            return;
        }

        switch (Subtable->Type)
        {
        case ACPI_SRAT_TYPE_CPU_AFFINITY:

            InfoTable = AcpiDmTableInfoSrat0;
            break;

        case ACPI_SRAT_TYPE_MEMORY_AFFINITY:

            InfoTable = AcpiDmTableInfoSrat1;
            break;

        case ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY:

            InfoTable = AcpiDmTableInfoSrat2;
            break;

        case ACPI_SRAT_TYPE_GICC_AFFINITY:

            InfoTable = AcpiDmTableInfoSrat3;
            break;

        case ACPI_SRAT_TYPE_GIC_ITS_AFFINITY:

            InfoTable = AcpiDmTableInfoSrat4;
            break;

        case ACPI_SRAT_TYPE_GENERIC_AFFINITY:

            InfoTable = AcpiDmTableInfoSrat5;
            break;

        case ACPI_SRAT_TYPE_GENERIC_PORT_AFFINITY:

            InfoTable = AcpiDmTableInfoSrat6;
            break;

        case ACPI_SRAT_TYPE_RINTC_AFFINITY:

            InfoTable = AcpiDmTableInfoSrat7;
            break;

        default:
            AcpiOsPrintf ("\n**** Unknown SRAT subtable type 0x%X\n",
                Subtable->Type);

            /* Attempt to continue */

            if (!Subtable->Length)
            {
                AcpiOsPrintf ("Invalid zero length subtable\n");
                return;
            }
            goto NextSubtable;
        }

        AcpiOsPrintf ("\n");
        Status = AcpiDmDumpTable (Table->Length, Offset, Subtable,
            Subtable->Length, InfoTable);
        if (ACPI_FAILURE (Status))
        {
            return;
        }

NextSubtable:
        /* Point to next subtable */

        Offset += Subtable->Length;
        Subtable = ACPI_ADD_PTR (ACPI_SUBTABLE_HEADER, Subtable,
            Subtable->Length);
    }
}


/*******************************************************************************
 *
 * FUNCTION:    AcpiDmDumpStao
 *
 * PARAMETERS:  Table               - A STAO table
 *
 * RETURN:      None
 *
 * DESCRIPTION: Format the contents of a STAO. This is a variable-length
 *              table that contains an open-ended number of ASCII strings
 *              at the end of the table.
 *
 ******************************************************************************/

void
AcpiDmDumpStao (
    ACPI_TABLE_HEADER       *Table)
{
    ACPI_STATUS             Status;
    char                    *Namepath;
    UINT32                  Length = Table->Length;
    UINT32                  StringLength;
    UINT32                  Offset = sizeof (ACPI_TABLE_STAO);


    /* Main table */

    Status = AcpiDmDumpTable (Length, 0, Table, 0, AcpiDmTableInfoStao);
    if (ACPI_FAILURE (Status))
    {
        return;
    }

    /* The rest of the table consists of Namepath strings */

    while (Offset < Table->Length)
    {
        Namepath = ACPI_ADD_PTR (char, Table, Offset);
        StringLength = strlen (Namepath) + 1;

        AcpiDmLineHeader (Offset, StringLength, "Namepath");
        AcpiOsPrintf ("\"%s\"\n", Namepath);

        /* Point to next namepath */

        Offset += StringLength;
    }
}


/*******************************************************************************
 *
 * FUNCTION:    AcpiDmDumpSvkl
 *
 * PARAMETERS:  Table               - A SVKL table
 *
 * RETURN:      None
 *
 * DESCRIPTION: Format the contents of a SVKL. This is a variable-length
 *              table that contains an open-ended number of key subtables at
 *              the end of the header.
 *
 * NOTES: SVKL is essentially a flat table, with a small main table and
 *          a variable number of a single type of subtable.
 *
 ******************************************************************************/

void
AcpiDmDumpSvkl (
    ACPI_TABLE_HEADER       *Table)
{
    ACPI_STATUS             Status;
    UINT32                  Length = Table->Length;
    UINT32                  Offset = sizeof (ACPI_TABLE_SVKL);
    ACPI_SVKL_KEY           *Subtable;


    /* Main table */

    Status = AcpiDmDumpTable (Length, 0, Table, 0, AcpiDmTableInfoSvkl);
    if (ACPI_FAILURE (Status))
    {
        return;
    }

    /* The rest of the table consists of subtables (single type) */

    Subtable = ACPI_ADD_PTR (ACPI_SVKL_KEY, Table, Offset);
    while (Offset < Table->Length)
    {
        /* Dump the subtable */

        AcpiOsPrintf ("\n");
        Status = AcpiDmDumpTable (Table->Length, Offset, Subtable,
            sizeof (ACPI_SVKL_KEY), AcpiDmTableInfoSvkl0);
        if (ACPI_FAILURE (Status))
        {
            return;
        }

        /* Point to next subtable */

        Offset += sizeof (ACPI_SVKL_KEY);
        Subtable = ACPI_ADD_PTR (ACPI_SVKL_KEY, Subtable,
            sizeof (ACPI_SVKL_KEY));
    }
}


/*******************************************************************************
 *
 * FUNCTION:    AcpiDmDumpTcpa
 *
 * PARAMETERS:  Table               - A TCPA table
 *
 * RETURN:      None
 *
 * DESCRIPTION: Format the contents of a TCPA.
 *
 * NOTE:        There are two versions of the table with the same signature:
 *              the client version and the server version. The common
 *              PlatformClass field is used to differentiate the two types of
 *              tables.
 *
 ******************************************************************************/

void
AcpiDmDumpTcpa (
    ACPI_TABLE_HEADER       *Table)
{
    UINT32                  Offset = sizeof (ACPI_TABLE_TCPA_HDR);
    ACPI_TABLE_TCPA_HDR     *CommonHeader = ACPI_CAST_PTR (
                                ACPI_TABLE_TCPA_HDR, Table);
    ACPI_TABLE_TCPA_HDR     *Subtable = ACPI_ADD_PTR (
                                ACPI_TABLE_TCPA_HDR, Table, Offset);
    ACPI_STATUS             Status;


    /* Main table */

    Status = AcpiDmDumpTable (Table->Length, 0, Table,
        0, AcpiDmTableInfoTcpaHdr);
    if (ACPI_FAILURE (Status))
    {
        return;
    }

    /*
     * Examine the PlatformClass field to determine the table type.
     * Either a client or server table. Only one.
     */
    switch (CommonHeader->PlatformClass)
    {
    case ACPI_TCPA_CLIENT_TABLE:

        Status = AcpiDmDumpTable (Table->Length, Offset, Subtable,
            Table->Length - Offset, AcpiDmTableInfoTcpaClient);
        break;

    case ACPI_TCPA_SERVER_TABLE:

        Status = AcpiDmDumpTable (Table->Length, Offset, Subtable,
            Table->Length - Offset, AcpiDmTableInfoTcpaServer);
        break;

    default:

        AcpiOsPrintf ("\n**** Unknown TCPA Platform Class 0x%X\n",
            CommonHeader->PlatformClass);
        Status = AE_ERROR;
        break;
    }

    if (ACPI_FAILURE (Status))
    {
        AcpiOsPrintf ("\n**** Cannot disassemble TCPA table\n");
    }
}


/*******************************************************************************
 *
 * FUNCTION:    AcpiDmDumpTpm2
 *
 * PARAMETERS:  Table               - A TPM2 table
 *
 * RETURN:      None
 *
 * DESCRIPTION: Format the contents of a TPM2.
 *
 ******************************************************************************/

static void
AcpiDmDumpTpm2Rev3 (
    ACPI_TABLE_HEADER       *Table)
{
    UINT32                  Offset = sizeof (ACPI_TABLE_TPM23);
    ACPI_TABLE_TPM23        *CommonHeader = ACPI_CAST_PTR (ACPI_TABLE_TPM23, Table);
    ACPI_TPM23_TRAILER      *Subtable = ACPI_ADD_PTR (ACPI_TPM23_TRAILER, Table, Offset);
    ACPI_STATUS             Status;


    /* Main table */

    Status = AcpiDmDumpTable (Table->Length, 0, Table, 0, AcpiDmTableInfoTpm23);
    if (ACPI_FAILURE (Status))
    {
        return;
    }

    /* Optional subtable if start method is ACPI start method */

    switch (CommonHeader->StartMethod)
    {
    case ACPI_TPM23_ACPI_START_METHOD:

        (void) AcpiDmDumpTable (Table->Length, Offset, Subtable,
            Table->Length - Offset, AcpiDmTableInfoTpm23a);
        break;

    default:
        break;
    }
}


/*******************************************************************************
 *
 * FUNCTION:    AcpiDmDumpTpm2
 *
 * PARAMETERS:  Table               - A TPM2 table
 *
 * RETURN:      None
 *
 * DESCRIPTION: Format the contents of a TPM2.
 *
 ******************************************************************************/

void
AcpiDmDumpTpm2 (
    ACPI_TABLE_HEADER       *Table)
{
    UINT32                  Offset = sizeof (ACPI_TABLE_TPM2);
    ACPI_TABLE_TPM2         *CommonHeader = ACPI_CAST_PTR (ACPI_TABLE_TPM2, Table);
    ACPI_TPM2_TRAILER       *Subtable = ACPI_ADD_PTR (ACPI_TPM2_TRAILER, Table, Offset);
    ACPI_TPM2_ARM_SMC       *ArmSubtable;
    ACPI_STATUS             Status;


    if (Table->Revision == 3)
    {
        AcpiDmDumpTpm2Rev3(Table);
        return;
    }

    /* Main table */

    Status = AcpiDmDumpTable (Table->Length, 0, Table, 0, AcpiDmTableInfoTpm2);

    if (ACPI_FAILURE (Status))
    {
        return;
    }

    AcpiOsPrintf ("\n");
    Status = AcpiDmDumpTable (Table->Length, Offset, Subtable,
        Table->Length - Offset, AcpiDmTableInfoTpm2a);
    if (ACPI_FAILURE (Status))
    {
        return;
    }

    switch (CommonHeader->StartMethod)
    {
    case ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC:

        ArmSubtable = ACPI_ADD_PTR (ACPI_TPM2_ARM_SMC, Subtable,
            sizeof (ACPI_TPM2_TRAILER));
        Offset += sizeof (ACPI_TPM2_TRAILER);

        AcpiOsPrintf ("\n");
        (void) AcpiDmDumpTable (Table->Length, Offset, ArmSubtable,
            Table->Length - Offset, AcpiDmTableInfoTpm211);
        break;

    default:
        break;
    }
}


/*******************************************************************************
 *
 * FUNCTION:    AcpiDmDumpViot
 *
 * PARAMETERS:  Table               - A VIOT table
 *
 * RETURN:      None
 *
 * DESCRIPTION: Format the contents of a VIOT
 *
 ******************************************************************************/

void
AcpiDmDumpViot (
    ACPI_TABLE_HEADER       *Table)
{
    ACPI_STATUS             Status;
    ACPI_TABLE_VIOT         *Viot;
    ACPI_VIOT_HEADER        *ViotHeader;
    UINT16                  Length;
    UINT32                  Offset;
    ACPI_DMTABLE_INFO       *InfoTable;

    /* Main table */

    Status = AcpiDmDumpTable (Table->Length, 0, Table, 0, AcpiDmTableInfoViot);
    if (ACPI_FAILURE (Status))
    {
        return;
    }

    Viot = ACPI_CAST_PTR (ACPI_TABLE_VIOT, Table);

    Offset = Viot->NodeOffset;
    while (Offset < Table->Length)
    {
        /* Common subtable header */
        ViotHeader = ACPI_ADD_PTR (ACPI_VIOT_HEADER, Table, Offset);
        AcpiOsPrintf ("\n");

        Length = sizeof (ACPI_VIOT_HEADER);
        Status = AcpiDmDumpTable (Table->Length, Offset, ViotHeader, Length,
            AcpiDmTableInfoViotHeader);
        if (ACPI_FAILURE (Status))
        {
            return;
        }

        Length = ViotHeader->Length;
        switch (ViotHeader->Type)
        {
        case ACPI_VIOT_NODE_PCI_RANGE:

            InfoTable = AcpiDmTableInfoViot1;
            break;

        case ACPI_VIOT_NODE_MMIO:

            InfoTable = AcpiDmTableInfoViot2;
            break;

        case ACPI_VIOT_NODE_VIRTIO_IOMMU_PCI:

            InfoTable = AcpiDmTableInfoViot3;
            break;

        case ACPI_VIOT_NODE_VIRTIO_IOMMU_MMIO:

            InfoTable = AcpiDmTableInfoViot4;
            break;

        default:

            AcpiOsPrintf ("\n*** Unknown VIOT node type 0x%X\n",
                ViotHeader->Type);

            /* Attempt to continue */

            if (!Length)
            {
                AcpiOsPrintf ("Invalid zero length VIOT node\n");
                return;
            }
            goto NextSubtable;
        }

        AcpiOsPrintf ("\n");
        Status = AcpiDmDumpTable (Table->Length, Offset, ViotHeader, Length,
            InfoTable);
        if (ACPI_FAILURE (Status))
        {
            return;
        }

NextSubtable:
        Offset += Length;
    }
}


/*******************************************************************************
 *
 * FUNCTION:    AcpiDmDumpWdat
 *
 * PARAMETERS:  Table               - A WDAT table
 *
 * RETURN:      None
 *
 * DESCRIPTION: Format the contents of a WDAT
 *
 ******************************************************************************/

void
AcpiDmDumpWdat (
    ACPI_TABLE_HEADER       *Table)
{
    ACPI_STATUS             Status;
    UINT32                  Offset = sizeof (ACPI_TABLE_WDAT);
    ACPI_WDAT_ENTRY         *Subtable;


    /* Main table */

    Status = AcpiDmDumpTable (Table->Length, 0, Table, 0, AcpiDmTableInfoWdat);
    if (ACPI_FAILURE (Status))
    {
        return;
    }

    /* Subtables */

    Subtable = ACPI_ADD_PTR (ACPI_WDAT_ENTRY, Table, Offset);
    while (Offset < Table->Length)
    {
        /* Common subtable header */

        AcpiOsPrintf ("\n");
        Status = AcpiDmDumpTable (Table->Length, Offset, Subtable,
            sizeof (ACPI_WDAT_ENTRY), AcpiDmTableInfoWdat0);
        if (ACPI_FAILURE (Status))
        {
            return;
        }

        /* Point to next subtable */

        Offset += sizeof (ACPI_WDAT_ENTRY);
        Subtable = ACPI_ADD_PTR (ACPI_WDAT_ENTRY, Subtable,
            sizeof (ACPI_WDAT_ENTRY));
    }
}


/*******************************************************************************
 *
 * FUNCTION:    AcpiDmDumpWpbt
 *
 * PARAMETERS:  Table               - A WPBT table
 *
 * RETURN:      None
 *
 * DESCRIPTION: Format the contents of a WPBT. This table type consists
 *              of an open-ended arguments buffer at the end of the table.
 *
 ******************************************************************************/

void
AcpiDmDumpWpbt (
    ACPI_TABLE_HEADER       *Table)
{
    ACPI_STATUS             Status;
    ACPI_TABLE_WPBT         *Subtable;
    UINT16                  ArgumentsLength;


    /* Dump the main table */

    Status = AcpiDmDumpTable (Table->Length, 0, Table, 0, AcpiDmTableInfoWpbt);
    if (ACPI_FAILURE (Status))
    {
        return;
    }

    /* Extract the arguments buffer length from the main table */

    Subtable = ACPI_CAST_PTR (ACPI_TABLE_WPBT, Table);
    ArgumentsLength = Subtable->ArgumentsLength;

    /* Dump the arguments buffer if present */

    if (ArgumentsLength)
    {
        (void) AcpiDmDumpTable (Table->Length, 0, Table, ArgumentsLength,
            AcpiDmTableInfoWpbt0);
    }
}