Home | History | Annotate | Line # | Download | only in compiler
aslanalyze.c revision 1.6
      1 /******************************************************************************
      2  *
      3  * Module Name: aslanalyze.c - Support functions for parse tree walks
      4  *
      5  *****************************************************************************/
      6 
      7 /*
      8  * Copyright (C) 2000 - 2016, Intel Corp.
      9  * All rights reserved.
     10  *
     11  * Redistribution and use in source and binary forms, with or without
     12  * modification, are permitted provided that the following conditions
     13  * are met:
     14  * 1. Redistributions of source code must retain the above copyright
     15  *    notice, this list of conditions, and the following disclaimer,
     16  *    without modification.
     17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
     18  *    substantially similar to the "NO WARRANTY" disclaimer below
     19  *    ("Disclaimer") and any redistribution must be conditioned upon
     20  *    including a substantially similar Disclaimer requirement for further
     21  *    binary redistribution.
     22  * 3. Neither the names of the above-listed copyright holders nor the names
     23  *    of any contributors may be used to endorse or promote products derived
     24  *    from this software without specific prior written permission.
     25  *
     26  * Alternatively, this software may be distributed under the terms of the
     27  * GNU General Public License ("GPL") version 2 as published by the Free
     28  * Software Foundation.
     29  *
     30  * NO WARRANTY
     31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
     34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
     35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
     39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
     40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     41  * POSSIBILITY OF SUCH DAMAGES.
     42  */
     43 
     44 #include "aslcompiler.h"
     45 #include "aslcompiler.y.h"
     46 #include <string.h>
     47 
     48 
     49 #define _COMPONENT          ACPI_COMPILER
     50         ACPI_MODULE_NAME    ("aslanalyze")
     51 
     52 
     53 /*******************************************************************************
     54  *
     55  * FUNCTION:    AnIsInternalMethod
     56  *
     57  * PARAMETERS:  Op                  - Current op
     58  *
     59  * RETURN:      Boolean
     60  *
     61  * DESCRIPTION: Check for an internal control method.
     62  *
     63  ******************************************************************************/
     64 
     65 BOOLEAN
     66 AnIsInternalMethod (
     67     ACPI_PARSE_OBJECT       *Op)
     68 {
     69 
     70     if ((!strcmp (Op->Asl.ExternalName, "\\_OSI")) ||
     71         (!strcmp (Op->Asl.ExternalName, "_OSI")))
     72     {
     73         return (TRUE);
     74     }
     75 
     76     return (FALSE);
     77 }
     78 
     79 
     80 /*******************************************************************************
     81  *
     82  * FUNCTION:    AnGetInternalMethodReturnType
     83  *
     84  * PARAMETERS:  Op                  - Current op
     85  *
     86  * RETURN:      Btype
     87  *
     88  * DESCRIPTION: Get the return type of an internal method
     89  *
     90  ******************************************************************************/
     91 
     92 UINT32
     93 AnGetInternalMethodReturnType (
     94     ACPI_PARSE_OBJECT       *Op)
     95 {
     96 
     97     if ((!strcmp (Op->Asl.ExternalName, "\\_OSI")) ||
     98         (!strcmp (Op->Asl.ExternalName, "_OSI")))
     99     {
    100         return (ACPI_BTYPE_STRING);
    101     }
    102 
    103     return (0);
    104 }
    105 
    106 
    107 /*******************************************************************************
    108  *
    109  * FUNCTION:    AnCheckId
    110  *
    111  * PARAMETERS:  Op                  - Current parse op
    112  *              Type                - HID or CID
    113  *
    114  * RETURN:      None
    115  *
    116  * DESCRIPTION: Perform various checks on _HID and _CID strings. Only limited
    117  *              checks can be performed on _CID strings.
    118  *
    119  ******************************************************************************/
    120 
    121 void
    122 AnCheckId (
    123     ACPI_PARSE_OBJECT       *Op,
    124     ACPI_NAME               Type)
    125 {
    126     UINT32                  i;
    127     ACPI_SIZE               Length;
    128 
    129 
    130     /* Only care about string versions of _HID/_CID (integers are legal) */
    131 
    132     if (Op->Asl.ParseOpcode != PARSEOP_STRING_LITERAL)
    133     {
    134         return;
    135     }
    136 
    137     /* For both _HID and _CID, the string must be non-null */
    138 
    139     Length = strlen (Op->Asl.Value.String);
    140     if (!Length)
    141     {
    142         AslError (ASL_ERROR, ASL_MSG_NULL_STRING, Op, NULL);
    143         return;
    144     }
    145 
    146     /*
    147      * One of the things we want to catch here is the use of a leading
    148      * asterisk in the string -- an odd construct that certain platform
    149      * manufacturers are fond of. Technically, a leading asterisk is OK
    150      * for _CID, but a valid use of this has not been seen.
    151      */
    152     if (*Op->Asl.Value.String == '*')
    153     {
    154         AslError (ASL_ERROR, ASL_MSG_LEADING_ASTERISK,
    155             Op, Op->Asl.Value.String);
    156         return;
    157     }
    158 
    159     /* _CID strings are bus-specific, no more checks can be performed */
    160 
    161     if (Type == ASL_TYPE_CID)
    162     {
    163         return;
    164     }
    165 
    166     /* For _HID, all characters must be alphanumeric */
    167 
    168     for (i = 0; Op->Asl.Value.String[i]; i++)
    169     {
    170         if (!isalnum ((int) Op->Asl.Value.String[i]))
    171         {
    172             AslError (ASL_ERROR, ASL_MSG_ALPHANUMERIC_STRING,
    173                 Op, Op->Asl.Value.String);
    174             return;
    175         }
    176     }
    177 
    178     /*
    179      * _HID String must be one of these forms:
    180      *
    181      * "AAA####"    A is an uppercase letter and # is a hex digit
    182      * "ACPI####"   # is a hex digit
    183      * "NNNN####"   N is an uppercase letter or decimal digit (0-9)
    184      *              # is a hex digit (ACPI 5.0)
    185      */
    186     if ((Length < 7) || (Length > 8))
    187     {
    188         AslError (ASL_ERROR, ASL_MSG_HID_LENGTH,
    189             Op, Op->Asl.Value.String);
    190         return;
    191     }
    192 
    193     /* _HID Length is valid (7 or 8), now check prefix (first 3 or 4 chars) */
    194 
    195     if (Length == 7)
    196     {
    197         /* AAA####: Ensure the alphabetic prefix is all uppercase */
    198 
    199         for (i = 0; i < 3; i++)
    200         {
    201             if (!isupper ((int) Op->Asl.Value.String[i]))
    202             {
    203                 AslError (ASL_ERROR, ASL_MSG_UPPER_CASE,
    204                     Op, &Op->Asl.Value.String[i]);
    205                 return;
    206             }
    207         }
    208     }
    209     else /* Length == 8 */
    210     {
    211         /*
    212          * ACPI#### or NNNN####:
    213          * Ensure the prefix contains only uppercase alpha or decimal digits
    214          */
    215         for (i = 0; i < 4; i++)
    216         {
    217             if (!isupper ((int) Op->Asl.Value.String[i]) &&
    218                 !isdigit ((int) Op->Asl.Value.String[i]))
    219             {
    220                 AslError (ASL_ERROR, ASL_MSG_HID_PREFIX,
    221                     Op, &Op->Asl.Value.String[i]);
    222                 return;
    223             }
    224         }
    225     }
    226 
    227     /* Remaining characters (suffix) must be hex digits */
    228 
    229     for (; i < Length; i++)
    230     {
    231         if (!isxdigit ((int) Op->Asl.Value.String[i]))
    232         {
    233             AslError (ASL_ERROR, ASL_MSG_HID_SUFFIX,
    234                 Op, &Op->Asl.Value.String[i]);
    235             break;
    236         }
    237     }
    238 }
    239 
    240 
    241 /*******************************************************************************
    242  *
    243  * FUNCTION:    AnLastStatementIsReturn
    244  *
    245  * PARAMETERS:  Op                  - A method parse node
    246  *
    247  * RETURN:      TRUE if last statement is an ASL RETURN. False otherwise
    248  *
    249  * DESCRIPTION: Walk down the list of top level statements within a method
    250  *              to find the last one. Check if that last statement is in
    251  *              fact a RETURN statement.
    252  *
    253  ******************************************************************************/
    254 
    255 BOOLEAN
    256 AnLastStatementIsReturn (
    257     ACPI_PARSE_OBJECT       *Op)
    258 {
    259     ACPI_PARSE_OBJECT       *Next;
    260 
    261 
    262     /* Check if last statement is a return */
    263 
    264     Next = ASL_GET_CHILD_NODE (Op);
    265     while (Next)
    266     {
    267         if ((!Next->Asl.Next) &&
    268             (Next->Asl.ParseOpcode == PARSEOP_RETURN))
    269         {
    270             return (TRUE);
    271         }
    272 
    273         Next = ASL_GET_PEER_NODE (Next);
    274     }
    275 
    276     return (FALSE);
    277 }
    278 
    279 
    280 /*******************************************************************************
    281  *
    282  * FUNCTION:    AnCheckMethodReturnValue
    283  *
    284  * PARAMETERS:  Op                  - Parent
    285  *              OpInfo              - Parent info
    286  *              ArgOp               - Method invocation op
    287  *              RequiredBtypes      - What caller requires
    288  *              ThisNodeBtype       - What this node returns (if anything)
    289  *
    290  * RETURN:      None
    291  *
    292  * DESCRIPTION: Check a method invocation for 1) A return value and if it does
    293  *              in fact return a value, 2) check the type of the return value.
    294  *
    295  ******************************************************************************/
    296 
    297 void
    298 AnCheckMethodReturnValue (
    299     ACPI_PARSE_OBJECT       *Op,
    300     const ACPI_OPCODE_INFO  *OpInfo,
    301     ACPI_PARSE_OBJECT       *ArgOp,
    302     UINT32                  RequiredBtypes,
    303     UINT32                  ThisNodeBtype)
    304 {
    305     ACPI_PARSE_OBJECT       *OwningOp;
    306     ACPI_NAMESPACE_NODE     *Node;
    307 
    308 
    309     Node = ArgOp->Asl.Node;
    310 
    311 
    312     /* Examine the parent op of this method */
    313 
    314     OwningOp = Node->Op;
    315     if (OwningOp->Asl.CompileFlags & NODE_METHOD_NO_RETVAL)
    316     {
    317         /* Method NEVER returns a value */
    318 
    319         AslError (ASL_ERROR, ASL_MSG_NO_RETVAL, Op, Op->Asl.ExternalName);
    320     }
    321     else if (OwningOp->Asl.CompileFlags & NODE_METHOD_SOME_NO_RETVAL)
    322     {
    323         /* Method SOMETIMES returns a value, SOMETIMES not */
    324 
    325         AslError (ASL_WARNING, ASL_MSG_SOME_NO_RETVAL,
    326             Op, Op->Asl.ExternalName);
    327     }
    328     else if (!(ThisNodeBtype & RequiredBtypes))
    329     {
    330         /* Method returns a value, but the type is wrong */
    331 
    332         AnFormatBtype (StringBuffer, ThisNodeBtype);
    333         AnFormatBtype (StringBuffer2, RequiredBtypes);
    334 
    335         /*
    336          * The case where the method does not return any value at all
    337          * was already handled in the namespace cross reference
    338          * -- Only issue an error if the method in fact returns a value,
    339          * but it is of the wrong type
    340          */
    341         if (ThisNodeBtype != 0)
    342         {
    343             snprintf (MsgBuffer, sizeof(MsgBuffer),
    344                 "Method returns [%s], %s operator requires [%s]",
    345                 StringBuffer, OpInfo->Name, StringBuffer2);
    346 
    347             AslError (ASL_ERROR, ASL_MSG_INVALID_TYPE, ArgOp, MsgBuffer);
    348         }
    349     }
    350 }
    351 
    352 
    353 /*******************************************************************************
    354  *
    355  * FUNCTION:    AnIsResultUsed
    356  *
    357  * PARAMETERS:  Op                  - Parent op for the operator
    358  *
    359  * RETURN:      TRUE if result from this operation is actually consumed
    360  *
    361  * DESCRIPTION: Determine if the function result value from an operator is
    362  *              used.
    363  *
    364  ******************************************************************************/
    365 
    366 BOOLEAN
    367 AnIsResultUsed (
    368     ACPI_PARSE_OBJECT       *Op)
    369 {
    370     ACPI_PARSE_OBJECT       *Parent;
    371 
    372 
    373     switch (Op->Asl.ParseOpcode)
    374     {
    375     case PARSEOP_INCREMENT:
    376     case PARSEOP_DECREMENT:
    377 
    378         /* These are standalone operators, no return value */
    379 
    380         return (TRUE);
    381 
    382     default:
    383 
    384         break;
    385     }
    386 
    387     /* Examine parent to determine if the return value is used */
    388 
    389     Parent = Op->Asl.Parent;
    390     switch (Parent->Asl.ParseOpcode)
    391     {
    392     /* If/While - check if the operator is the predicate */
    393 
    394     case PARSEOP_IF:
    395     case PARSEOP_WHILE:
    396 
    397         /* First child is the predicate */
    398 
    399         if (Parent->Asl.Child == Op)
    400         {
    401             return (TRUE);
    402         }
    403 
    404         return (FALSE);
    405 
    406     /* Not used if one of these is the parent */
    407 
    408     case PARSEOP_METHOD:
    409     case PARSEOP_DEFINITION_BLOCK:
    410     case PARSEOP_ELSE:
    411 
    412         return (FALSE);
    413 
    414     default:
    415 
    416         /* Any other type of parent means that the result is used */
    417 
    418         return (TRUE);
    419     }
    420 }
    421 
    422 
    423 /*******************************************************************************
    424  *
    425  * FUNCTION:    ApCheckForGpeNameConflict
    426  *
    427  * PARAMETERS:  Op                  - Current parse op
    428  *
    429  * RETURN:      None
    430  *
    431  * DESCRIPTION: Check for a conflict between GPE names within this scope.
    432  *              Conflict means two GPE names with the same GPE number, but
    433  *              different types -- such as _L1C and _E1C.
    434  *
    435  ******************************************************************************/
    436 
    437 void
    438 ApCheckForGpeNameConflict (
    439     ACPI_PARSE_OBJECT       *Op)
    440 {
    441     ACPI_PARSE_OBJECT       *NextOp;
    442     UINT32                  GpeNumber;
    443     char                    Name[ACPI_NAME_SIZE + 1];
    444     char                    Target[ACPI_NAME_SIZE];
    445 
    446 
    447     /* Need a null-terminated string version of NameSeg */
    448 
    449     ACPI_MOVE_32_TO_32 (Name, &Op->Asl.NameSeg);
    450     Name[ACPI_NAME_SIZE] = 0;
    451 
    452     /*
    453      * For a GPE method:
    454      * 1st char must be underscore
    455      * 2nd char must be L or E
    456      * 3rd/4th chars must be a hex number
    457      */
    458     if ((Name[0] != '_') ||
    459        ((Name[1] != 'L') && (Name[1] != 'E')))
    460     {
    461         return;
    462     }
    463 
    464     /* Verify 3rd/4th chars are a valid hex value */
    465 
    466     GpeNumber = strtoul (&Name[2], NULL, 16);
    467     if (GpeNumber == ACPI_UINT32_MAX)
    468     {
    469         return;
    470     }
    471 
    472     /*
    473      * We are now sure we have an _Lxx or _Exx.
    474      * Create the target name that would cause collision (Flip E/L)
    475      */
    476     ACPI_MOVE_32_TO_32 (Target, Name);
    477 
    478     /* Inject opposite letter ("L" versus "E") */
    479 
    480     if (Name[1] == 'L')
    481     {
    482         Target[1] = 'E';
    483     }
    484     else /* Name[1] == 'E' */
    485     {
    486         Target[1] = 'L';
    487     }
    488 
    489     /* Search all peers (objects within this scope) for target match */
    490 
    491     NextOp = Op->Asl.Next;
    492     while (NextOp)
    493     {
    494         /*
    495          * We mostly care about methods, but check Name() constructs also,
    496          * even though they will get another error for not being a method.
    497          * All GPE names must be defined as control methods.
    498          */
    499         if ((NextOp->Asl.ParseOpcode == PARSEOP_METHOD) ||
    500             (NextOp->Asl.ParseOpcode == PARSEOP_NAME))
    501         {
    502             if (ACPI_COMPARE_NAME (Target, NextOp->Asl.NameSeg))
    503             {
    504                 /* Found both _Exy and _Lxy in the same scope, error */
    505 
    506                 AslError (ASL_ERROR, ASL_MSG_GPE_NAME_CONFLICT, NextOp,
    507                     Name);
    508                 return;
    509             }
    510         }
    511 
    512         NextOp = NextOp->Asl.Next;
    513     }
    514 
    515     /* OK, no conflict found */
    516 
    517     return;
    518 }
    519 
    520 
    521 /*******************************************************************************
    522  *
    523  * FUNCTION:    ApCheckRegMethod
    524  *
    525  * PARAMETERS:  Op                  - Current parse op
    526  *
    527  * RETURN:      None
    528  *
    529  * DESCRIPTION: Ensure that a _REG method has a corresponding Operation
    530  *              Region declaration within the same scope. Note: _REG is defined
    531  *              to have two arguments and must therefore be defined as a
    532  *              control method.
    533  *
    534  ******************************************************************************/
    535 
    536 void
    537 ApCheckRegMethod (
    538     ACPI_PARSE_OBJECT       *Op)
    539 {
    540     ACPI_PARSE_OBJECT       *Next;
    541     ACPI_PARSE_OBJECT       *Parent;
    542 
    543 
    544     /* We are only interested in _REG methods */
    545 
    546     if (!ACPI_COMPARE_NAME (METHOD_NAME__REG, &Op->Asl.NameSeg))
    547     {
    548         return;
    549     }
    550 
    551     /* Get the start of the current scope */
    552 
    553     Parent = Op->Asl.Parent;
    554     Next = Parent->Asl.Child;
    555 
    556     /* Search entire scope for an operation region declaration */
    557 
    558     while (Next)
    559     {
    560         if (Next->Asl.ParseOpcode == PARSEOP_OPERATIONREGION)
    561         {
    562             return; /* Found region, OK */
    563         }
    564 
    565         Next = Next->Asl.Next;
    566     }
    567 
    568     /* No region found, issue warning */
    569 
    570     AslError (ASL_WARNING, ASL_MSG_NO_REGION, Op, NULL);
    571 }
    572 
    573 
    574 /*******************************************************************************
    575  *
    576  * FUNCTION:    ApFindNameInScope
    577  *
    578  * PARAMETERS:  Name                - Name to search for
    579  *              Op                  - Current parse op
    580  *
    581  * RETURN:      TRUE if name found in the same scope as Op.
    582  *
    583  * DESCRIPTION: Determine if a name appears in the same scope as Op, as either
    584  *              a Method() or a Name().
    585  *
    586  ******************************************************************************/
    587 
    588 BOOLEAN
    589 ApFindNameInScope (
    590     char                    *Name,
    591     ACPI_PARSE_OBJECT       *Op)
    592 {
    593     ACPI_PARSE_OBJECT       *Next;
    594     ACPI_PARSE_OBJECT       *Parent;
    595 
    596 
    597     /* Get the start of the current scope */
    598 
    599     Parent = Op->Asl.Parent;
    600     Next = Parent->Asl.Child;
    601 
    602     /* Search entire scope for a match to the name */
    603 
    604     while (Next)
    605     {
    606         if ((Next->Asl.ParseOpcode == PARSEOP_METHOD) ||
    607             (Next->Asl.ParseOpcode == PARSEOP_NAME))
    608         {
    609             if (ACPI_COMPARE_NAME (Name, Next->Asl.NameSeg))
    610             {
    611                 return (TRUE);
    612             }
    613         }
    614 
    615         Next = Next->Asl.Next;
    616     }
    617 
    618     return (FALSE);
    619 }
    620