aslascii.c revision 1.1.1.3 1 /******************************************************************************
2 *
3 * Module Name: aslascii - ASCII detection and support routines
4 *
5 *****************************************************************************/
6
7 /*
8 * Copyright (C) 2000 - 2015, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44 #include "aslcompiler.h"
45 #include <acapps.h>
46
47 #define _COMPONENT ACPI_COMPILER
48 ACPI_MODULE_NAME ("aslascii")
49
50
51 /* Local prototypes */
52
53 static void
54 FlConsumeAnsiComment (
55 FILE *Handle,
56 ASL_FILE_STATUS *Status);
57
58 static void
59 FlConsumeNewComment (
60 FILE *Handle,
61 ASL_FILE_STATUS *Status);
62
63
64 /*******************************************************************************
65 *
66 * FUNCTION: FlCheckForAcpiTable
67 *
68 * PARAMETERS: Handle - Open input file
69 *
70 * RETURN: Status
71 *
72 * DESCRIPTION: Determine if a file seems to be a binary ACPI table, via the
73 * following checks on what would be the table header:
74 * 0) File must be at least as long as an ACPI_TABLE_HEADER
75 * 1) The header length field must match the file size
76 * 2) Signature, OemId, OemTableId, AslCompilerId must be ASCII
77 *
78 ******************************************************************************/
79
80 ACPI_STATUS
81 FlCheckForAcpiTable (
82 FILE *Handle)
83 {
84 ACPI_TABLE_HEADER Table;
85 UINT32 FileSize;
86 size_t Actual;
87 UINT32 i;
88
89
90 /* Read a potential table header */
91
92 Actual = fread (&Table, 1, sizeof (ACPI_TABLE_HEADER), Handle);
93 fseek (Handle, 0, SEEK_SET);
94
95 if (Actual < sizeof (ACPI_TABLE_HEADER))
96 {
97 return (AE_ERROR);
98 }
99
100 /* Header length field must match the file size */
101
102 FileSize = CmGetFileSize (Handle);
103 if (Table.Length != FileSize)
104 {
105 return (AE_ERROR);
106 }
107
108 /*
109 * These fields must be ASCII:
110 * Signature, OemId, OemTableId, AslCompilerId.
111 * We allow a NULL terminator in OemId and OemTableId.
112 */
113 for (i = 0; i < ACPI_NAME_SIZE; i++)
114 {
115 if (!ACPI_IS_ASCII ((UINT8) Table.Signature[i]))
116 {
117 return (AE_ERROR);
118 }
119
120 if (!ACPI_IS_ASCII ((UINT8) Table.AslCompilerId[i]))
121 {
122 return (AE_ERROR);
123 }
124 }
125
126 for (i = 0; (i < ACPI_OEM_ID_SIZE) && (Table.OemId[i]); i++)
127 {
128 if (!ACPI_IS_ASCII ((UINT8) Table.OemId[i]))
129 {
130 return (AE_ERROR);
131 }
132 }
133
134 for (i = 0; (i < ACPI_OEM_TABLE_ID_SIZE) && (Table.OemTableId[i]); i++)
135 {
136 if (!ACPI_IS_ASCII ((UINT8) Table.OemTableId[i]))
137 {
138 return (AE_ERROR);
139 }
140 }
141
142 printf ("Binary file appears to be a valid ACPI table, disassembling\n");
143 return (AE_OK);
144 }
145
146
147 /*******************************************************************************
148 *
149 * FUNCTION: FlCheckForAscii
150 *
151 * PARAMETERS: Filename - Full input filename
152 * DisplayErrors - TRUE if error messages desired
153 *
154 * RETURN: Status
155 *
156 * DESCRIPTION: Verify that the input file is entirely ASCII. Ignores characters
157 * within comments. Note: does not handle nested comments and does
158 * not handle comment delimiters within string literals. However,
159 * on the rare chance this happens and an invalid character is
160 * missed, the parser will catch the error by failing in some
161 * spectactular manner.
162 *
163 ******************************************************************************/
164
165 ACPI_STATUS
166 FlCheckForAscii (
167 char *Filename,
168 BOOLEAN DisplayErrors)
169 {
170 UINT8 Byte;
171 ACPI_SIZE BadBytes = 0;
172 BOOLEAN OpeningComment = FALSE;
173 ASL_FILE_STATUS Status;
174 FILE *Handle;
175
176
177 /* Open file in text mode so file offset is always accurate */
178
179 Handle = fopen (Filename, "rb");
180 if (!Handle)
181 {
182 perror ("Could not open input file");
183 return (AE_ERROR);
184 }
185
186 Status.Line = 1;
187 Status.Offset = 0;
188
189 /* Read the entire file */
190
191 while (fread (&Byte, 1, 1, Handle) == 1)
192 {
193 /* Ignore comment fields (allow non-ascii within) */
194
195 if (OpeningComment)
196 {
197 /* Check for second comment open delimiter */
198
199 if (Byte == '*')
200 {
201 FlConsumeAnsiComment (Handle, &Status);
202 }
203
204 if (Byte == '/')
205 {
206 FlConsumeNewComment (Handle, &Status);
207 }
208
209 /* Reset */
210
211 OpeningComment = FALSE;
212 }
213 else if (Byte == '/')
214 {
215 OpeningComment = TRUE;
216 }
217
218 /* Check for an ASCII character */
219
220 if (!ACPI_IS_ASCII (Byte))
221 {
222 if ((BadBytes < 10) && (DisplayErrors))
223 {
224 AcpiOsPrintf (
225 "Found non-ASCII character in source text: "
226 "0x%2.2X in line %u, file offset 0x%2.2X\n",
227 Byte, Status.Line, Status.Offset);
228 }
229 BadBytes++;
230 }
231
232 /* Ensure character is either printable or a "space" char */
233
234 else if (!isprint (Byte) && !isspace (Byte))
235 {
236 if ((BadBytes < 10) && (DisplayErrors))
237 {
238 AcpiOsPrintf (
239 "Found invalid character in source text: "
240 "0x%2.2X in line %u, file offset 0x%2.2X\n",
241 Byte, Status.Line, Status.Offset);
242 }
243 BadBytes++;
244 }
245
246 /* Update line counter as necessary */
247
248 if (Byte == 0x0A)
249 {
250 Status.Line++;
251 }
252
253 Status.Offset++;
254 }
255
256 fclose (Handle);
257
258 /* Were there any non-ASCII characters in the file? */
259
260 if (BadBytes)
261 {
262 if (DisplayErrors)
263 {
264 AcpiOsPrintf (
265 "Total %u invalid characters found in input source text, "
266 "could be a binary file\n", BadBytes);
267 AslError (ASL_ERROR, ASL_MSG_NON_ASCII, NULL, Filename);
268 }
269
270 return (AE_BAD_CHARACTER);
271 }
272
273 /* File is OK (100% ASCII) */
274
275 return (AE_OK);
276 }
277
278
279 /*******************************************************************************
280 *
281 * FUNCTION: FlConsumeAnsiComment
282 *
283 * PARAMETERS: Handle - Open input file
284 * Status - File current status struct
285 *
286 * RETURN: Number of lines consumed
287 *
288 * DESCRIPTION: Step over a normal slash-star type comment
289 *
290 ******************************************************************************/
291
292 static void
293 FlConsumeAnsiComment (
294 FILE *Handle,
295 ASL_FILE_STATUS *Status)
296 {
297 UINT8 Byte;
298 BOOLEAN ClosingComment = FALSE;
299
300
301 while (fread (&Byte, 1, 1, Handle) == 1)
302 {
303 /* Scan until comment close is found */
304
305 if (ClosingComment)
306 {
307 if (Byte == '/')
308 {
309 Status->Offset++;
310 return;
311 }
312
313 if (Byte != '*')
314 {
315 /* Reset */
316
317 ClosingComment = FALSE;
318 }
319 }
320 else if (Byte == '*')
321 {
322 ClosingComment = TRUE;
323 }
324
325 /* Maintain line count */
326
327 if (Byte == 0x0A)
328 {
329 Status->Line++;
330 }
331
332 Status->Offset++;
333 }
334 }
335
336
337 /*******************************************************************************
338 *
339 * FUNCTION: FlConsumeNewComment
340 *
341 * PARAMETERS: Handle - Open input file
342 * Status - File current status struct
343 *
344 * RETURN: Number of lines consumed
345 *
346 * DESCRIPTION: Step over a slash-slash type of comment
347 *
348 ******************************************************************************/
349
350 static void
351 FlConsumeNewComment (
352 FILE *Handle,
353 ASL_FILE_STATUS *Status)
354 {
355 UINT8 Byte;
356
357
358 while (fread (&Byte, 1, 1, Handle) == 1)
359 {
360 Status->Offset++;
361
362 /* Comment ends at newline */
363
364 if (Byte == 0x0A)
365 {
366 Status->Line++;
367 return;
368 }
369 }
370 }
371