aslmapenter.c revision 1.1.1.6.2.2
1 1.1.1.6.2.2 jdolecek /****************************************************************************** 2 1.1.1.6.2.2 jdolecek * 3 1.1.1.6.2.2 jdolecek * Module Name: aslmapenter - Build resource descriptor/device maps 4 1.1.1.6.2.2 jdolecek * 5 1.1.1.6.2.2 jdolecek *****************************************************************************/ 6 1.1.1.6.2.2 jdolecek 7 1.1.1.6.2.2 jdolecek /* 8 1.1.1.6.2.2 jdolecek * Copyright (C) 2000 - 2017, Intel Corp. 9 1.1.1.6.2.2 jdolecek * All rights reserved. 10 1.1.1.6.2.2 jdolecek * 11 1.1.1.6.2.2 jdolecek * Redistribution and use in source and binary forms, with or without 12 1.1.1.6.2.2 jdolecek * modification, are permitted provided that the following conditions 13 1.1.1.6.2.2 jdolecek * are met: 14 1.1.1.6.2.2 jdolecek * 1. Redistributions of source code must retain the above copyright 15 1.1.1.6.2.2 jdolecek * notice, this list of conditions, and the following disclaimer, 16 1.1.1.6.2.2 jdolecek * without modification. 17 1.1.1.6.2.2 jdolecek * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 1.1.1.6.2.2 jdolecek * substantially similar to the "NO WARRANTY" disclaimer below 19 1.1.1.6.2.2 jdolecek * ("Disclaimer") and any redistribution must be conditioned upon 20 1.1.1.6.2.2 jdolecek * including a substantially similar Disclaimer requirement for further 21 1.1.1.6.2.2 jdolecek * binary redistribution. 22 1.1.1.6.2.2 jdolecek * 3. Neither the names of the above-listed copyright holders nor the names 23 1.1.1.6.2.2 jdolecek * of any contributors may be used to endorse or promote products derived 24 1.1.1.6.2.2 jdolecek * from this software without specific prior written permission. 25 1.1.1.6.2.2 jdolecek * 26 1.1.1.6.2.2 jdolecek * Alternatively, this software may be distributed under the terms of the 27 1.1.1.6.2.2 jdolecek * GNU General Public License ("GPL") version 2 as published by the Free 28 1.1.1.6.2.2 jdolecek * Software Foundation. 29 1.1.1.6.2.2 jdolecek * 30 1.1.1.6.2.2 jdolecek * NO WARRANTY 31 1.1.1.6.2.2 jdolecek * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 1.1.1.6.2.2 jdolecek * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 1.1.1.6.2.2 jdolecek * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 1.1.1.6.2.2 jdolecek * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 1.1.1.6.2.2 jdolecek * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 1.1.1.6.2.2 jdolecek * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 1.1.1.6.2.2 jdolecek * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 1.1.1.6.2.2 jdolecek * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 1.1.1.6.2.2 jdolecek * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 1.1.1.6.2.2 jdolecek * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 1.1.1.6.2.2 jdolecek * POSSIBILITY OF SUCH DAMAGES. 42 1.1.1.6.2.2 jdolecek */ 43 1.1.1.6.2.2 jdolecek 44 1.1.1.6.2.2 jdolecek #include "acpi.h" 45 1.1.1.6.2.2 jdolecek #include "accommon.h" 46 1.1.1.6.2.2 jdolecek #include "acapps.h" 47 1.1.1.6.2.2 jdolecek #include "aslcompiler.h" 48 1.1.1.6.2.2 jdolecek 49 1.1.1.6.2.2 jdolecek /* This module used for application-level code only */ 50 1.1.1.6.2.2 jdolecek 51 1.1.1.6.2.2 jdolecek #define _COMPONENT ACPI_COMPILER 52 1.1.1.6.2.2 jdolecek ACPI_MODULE_NAME ("aslmapenter") 53 1.1.1.6.2.2 jdolecek 54 1.1.1.6.2.2 jdolecek /* Local prototypes */ 55 1.1.1.6.2.2 jdolecek 56 1.1.1.6.2.2 jdolecek static ACPI_GPIO_INFO * 57 1.1.1.6.2.2 jdolecek MpCreateGpioInfo ( 58 1.1.1.6.2.2 jdolecek UINT16 PinNumber, 59 1.1.1.6.2.2 jdolecek char *DeviceName); 60 1.1.1.6.2.2 jdolecek 61 1.1.1.6.2.2 jdolecek static ACPI_SERIAL_INFO * 62 1.1.1.6.2.2 jdolecek MpCreateSerialInfo ( 63 1.1.1.6.2.2 jdolecek char *DeviceName, 64 1.1.1.6.2.2 jdolecek UINT16 Address); 65 1.1.1.6.2.2 jdolecek 66 1.1.1.6.2.2 jdolecek 67 1.1.1.6.2.2 jdolecek /******************************************************************************* 68 1.1.1.6.2.2 jdolecek * 69 1.1.1.6.2.2 jdolecek * FUNCTION: MpSaveGpioInfo 70 1.1.1.6.2.2 jdolecek * 71 1.1.1.6.2.2 jdolecek * PARAMETERS: Resource - GPIO resource descriptor 72 1.1.1.6.2.2 jdolecek * PinCount - From GPIO descriptor 73 1.1.1.6.2.2 jdolecek * PinList - From GPIO descriptor 74 1.1.1.6.2.2 jdolecek * DeviceName - The "ResourceSource" name 75 1.1.1.6.2.2 jdolecek * 76 1.1.1.6.2.2 jdolecek * RETURN: None 77 1.1.1.6.2.2 jdolecek * 78 1.1.1.6.2.2 jdolecek * DESCRIPTION: External Interface. 79 1.1.1.6.2.2 jdolecek * Save GPIO resource descriptor information. 80 1.1.1.6.2.2 jdolecek * Creates new GPIO info blocks, one for each pin defined by the 81 1.1.1.6.2.2 jdolecek * GPIO descriptor. 82 1.1.1.6.2.2 jdolecek * 83 1.1.1.6.2.2 jdolecek ******************************************************************************/ 84 1.1.1.6.2.2 jdolecek 85 1.1.1.6.2.2 jdolecek void 86 1.1.1.6.2.2 jdolecek MpSaveGpioInfo ( 87 1.1.1.6.2.2 jdolecek ACPI_PARSE_OBJECT *Op, 88 1.1.1.6.2.2 jdolecek AML_RESOURCE *Resource, 89 1.1.1.6.2.2 jdolecek UINT32 PinCount, 90 1.1.1.6.2.2 jdolecek UINT16 *PinList, 91 1.1.1.6.2.2 jdolecek char *DeviceName) 92 1.1.1.6.2.2 jdolecek { 93 1.1.1.6.2.2 jdolecek ACPI_GPIO_INFO *Info; 94 1.1.1.6.2.2 jdolecek UINT32 i; 95 1.1.1.6.2.2 jdolecek 96 1.1.1.6.2.2 jdolecek 97 1.1.1.6.2.2 jdolecek /* Mapfile option enabled? */ 98 1.1.1.6.2.2 jdolecek 99 1.1.1.6.2.2 jdolecek if (!Gbl_MapfileFlag) 100 1.1.1.6.2.2 jdolecek { 101 1.1.1.6.2.2 jdolecek return; 102 1.1.1.6.2.2 jdolecek } 103 1.1.1.6.2.2 jdolecek 104 1.1.1.6.2.2 jdolecek /* Create an info block for each pin defined in the descriptor */ 105 1.1.1.6.2.2 jdolecek 106 1.1.1.6.2.2 jdolecek for (i = 0; i < PinCount; i++) 107 1.1.1.6.2.2 jdolecek { 108 1.1.1.6.2.2 jdolecek Info = MpCreateGpioInfo (PinList[i], DeviceName); 109 1.1.1.6.2.2 jdolecek 110 1.1.1.6.2.2 jdolecek Info->Op = Op; 111 1.1.1.6.2.2 jdolecek Info->DeviceName = DeviceName; 112 1.1.1.6.2.2 jdolecek Info->PinCount = PinCount; 113 1.1.1.6.2.2 jdolecek Info->PinIndex = i; 114 1.1.1.6.2.2 jdolecek Info->PinNumber = PinList[i]; 115 1.1.1.6.2.2 jdolecek Info->Type = Resource->Gpio.ConnectionType; 116 1.1.1.6.2.2 jdolecek Info->Direction = (UINT8) (Resource->Gpio.IntFlags & 0x0003); /* _IOR, for IO descriptor */ 117 1.1.1.6.2.2 jdolecek Info->Polarity = (UINT8) ((Resource->Gpio.IntFlags >> 1) & 0x0003); /* _POL, for INT descriptor */ 118 1.1.1.6.2.2 jdolecek } 119 1.1.1.6.2.2 jdolecek } 120 1.1.1.6.2.2 jdolecek 121 1.1.1.6.2.2 jdolecek 122 1.1.1.6.2.2 jdolecek /******************************************************************************* 123 1.1.1.6.2.2 jdolecek * 124 1.1.1.6.2.2 jdolecek * FUNCTION: MpSaveSerialInfo 125 1.1.1.6.2.2 jdolecek * 126 1.1.1.6.2.2 jdolecek * PARAMETERS: Resource - A Serial resource descriptor 127 1.1.1.6.2.2 jdolecek * DeviceName - The "ResourceSource" name. 128 1.1.1.6.2.2 jdolecek * 129 1.1.1.6.2.2 jdolecek * RETURN: None 130 1.1.1.6.2.2 jdolecek * 131 1.1.1.6.2.2 jdolecek * DESCRIPTION: External Interface. 132 1.1.1.6.2.2 jdolecek * Save serial resource descriptor information. 133 1.1.1.6.2.2 jdolecek * Creates a new serial info block. 134 1.1.1.6.2.2 jdolecek * 135 1.1.1.6.2.2 jdolecek ******************************************************************************/ 136 1.1.1.6.2.2 jdolecek 137 1.1.1.6.2.2 jdolecek void 138 1.1.1.6.2.2 jdolecek MpSaveSerialInfo ( 139 1.1.1.6.2.2 jdolecek ACPI_PARSE_OBJECT *Op, 140 1.1.1.6.2.2 jdolecek AML_RESOURCE *Resource, 141 1.1.1.6.2.2 jdolecek char *DeviceName) 142 1.1.1.6.2.2 jdolecek { 143 1.1.1.6.2.2 jdolecek ACPI_SERIAL_INFO *Info; 144 1.1.1.6.2.2 jdolecek UINT16 Address; 145 1.1.1.6.2.2 jdolecek UINT32 Speed; 146 1.1.1.6.2.2 jdolecek 147 1.1.1.6.2.2 jdolecek 148 1.1.1.6.2.2 jdolecek /* Mapfile option enabled? */ 149 1.1.1.6.2.2 jdolecek 150 1.1.1.6.2.2 jdolecek if (!Gbl_MapfileFlag) 151 1.1.1.6.2.2 jdolecek { 152 1.1.1.6.2.2 jdolecek return; 153 1.1.1.6.2.2 jdolecek } 154 1.1.1.6.2.2 jdolecek 155 1.1.1.6.2.2 jdolecek if (Resource->DescriptorType != ACPI_RESOURCE_NAME_SERIAL_BUS) 156 1.1.1.6.2.2 jdolecek { 157 1.1.1.6.2.2 jdolecek return; 158 1.1.1.6.2.2 jdolecek } 159 1.1.1.6.2.2 jdolecek 160 1.1.1.6.2.2 jdolecek /* Extract address and speed from the resource descriptor */ 161 1.1.1.6.2.2 jdolecek 162 1.1.1.6.2.2 jdolecek switch (Resource->CommonSerialBus.Type) 163 1.1.1.6.2.2 jdolecek { 164 1.1.1.6.2.2 jdolecek case AML_RESOURCE_I2C_SERIALBUSTYPE: 165 1.1.1.6.2.2 jdolecek 166 1.1.1.6.2.2 jdolecek Address = Resource->I2cSerialBus.SlaveAddress; 167 1.1.1.6.2.2 jdolecek Speed = Resource->I2cSerialBus.ConnectionSpeed; 168 1.1.1.6.2.2 jdolecek break; 169 1.1.1.6.2.2 jdolecek 170 1.1.1.6.2.2 jdolecek case AML_RESOURCE_SPI_SERIALBUSTYPE: 171 1.1.1.6.2.2 jdolecek 172 1.1.1.6.2.2 jdolecek Address = Resource->SpiSerialBus.DeviceSelection; 173 1.1.1.6.2.2 jdolecek Speed = Resource->SpiSerialBus.ConnectionSpeed; 174 1.1.1.6.2.2 jdolecek break; 175 1.1.1.6.2.2 jdolecek 176 1.1.1.6.2.2 jdolecek case AML_RESOURCE_UART_SERIALBUSTYPE: 177 1.1.1.6.2.2 jdolecek 178 1.1.1.6.2.2 jdolecek Address = 0; 179 1.1.1.6.2.2 jdolecek Speed = Resource->UartSerialBus.DefaultBaudRate; 180 1.1.1.6.2.2 jdolecek break; 181 1.1.1.6.2.2 jdolecek 182 1.1.1.6.2.2 jdolecek default: /* Invalid bus subtype */ 183 1.1.1.6.2.2 jdolecek return; 184 1.1.1.6.2.2 jdolecek } 185 1.1.1.6.2.2 jdolecek 186 1.1.1.6.2.2 jdolecek Info = MpCreateSerialInfo (DeviceName, Address); 187 1.1.1.6.2.2 jdolecek 188 1.1.1.6.2.2 jdolecek Info->Op = Op; 189 1.1.1.6.2.2 jdolecek Info->DeviceName = DeviceName; 190 1.1.1.6.2.2 jdolecek Info->Resource = Resource; 191 1.1.1.6.2.2 jdolecek Info->Address = Address; 192 1.1.1.6.2.2 jdolecek Info->Speed = Speed; 193 1.1.1.6.2.2 jdolecek } 194 1.1.1.6.2.2 jdolecek 195 1.1.1.6.2.2 jdolecek 196 1.1.1.6.2.2 jdolecek /******************************************************************************* 197 1.1.1.6.2.2 jdolecek * 198 1.1.1.6.2.2 jdolecek * FUNCTION: MpCreateGpioInfo 199 1.1.1.6.2.2 jdolecek * 200 1.1.1.6.2.2 jdolecek * PARAMETERS: PinNumber - GPIO pin number 201 1.1.1.6.2.2 jdolecek * DeviceName - The "ResourceSource" name 202 1.1.1.6.2.2 jdolecek * 203 1.1.1.6.2.2 jdolecek * RETURN: New GPIO info block. 204 1.1.1.6.2.2 jdolecek * 205 1.1.1.6.2.2 jdolecek * DESCRIPTION: Create a new GPIO info block and place it on the global list. 206 1.1.1.6.2.2 jdolecek * The list is sorted by GPIO device names first, and pin numbers 207 1.1.1.6.2.2 jdolecek * secondarily. 208 1.1.1.6.2.2 jdolecek * 209 1.1.1.6.2.2 jdolecek ******************************************************************************/ 210 1.1.1.6.2.2 jdolecek 211 1.1.1.6.2.2 jdolecek static ACPI_GPIO_INFO * 212 1.1.1.6.2.2 jdolecek MpCreateGpioInfo ( 213 1.1.1.6.2.2 jdolecek UINT16 PinNumber, 214 1.1.1.6.2.2 jdolecek char *DeviceName) 215 1.1.1.6.2.2 jdolecek { 216 1.1.1.6.2.2 jdolecek ACPI_GPIO_INFO *Info; 217 1.1.1.6.2.2 jdolecek ACPI_GPIO_INFO *NextGpio; 218 1.1.1.6.2.2 jdolecek ACPI_GPIO_INFO *PrevGpio; 219 1.1.1.6.2.2 jdolecek char *Buffer; 220 1.1.1.6.2.2 jdolecek 221 1.1.1.6.2.2 jdolecek 222 1.1.1.6.2.2 jdolecek /* 223 1.1.1.6.2.2 jdolecek * Allocate a new info block and insert it into the global GPIO list 224 1.1.1.6.2.2 jdolecek * sorted by both source device name and then the pin number. There is 225 1.1.1.6.2.2 jdolecek * one block per pin. 226 1.1.1.6.2.2 jdolecek */ 227 1.1.1.6.2.2 jdolecek Buffer = UtLocalCacheCalloc (sizeof (ACPI_GPIO_INFO)); 228 1.1.1.6.2.2 jdolecek Info = ACPI_CAST_PTR (ACPI_GPIO_INFO, Buffer); 229 1.1.1.6.2.2 jdolecek 230 1.1.1.6.2.2 jdolecek NextGpio = Gbl_GpioList; 231 1.1.1.6.2.2 jdolecek PrevGpio = NULL; 232 1.1.1.6.2.2 jdolecek if (!Gbl_GpioList) 233 1.1.1.6.2.2 jdolecek { 234 1.1.1.6.2.2 jdolecek Gbl_GpioList = Info; 235 1.1.1.6.2.2 jdolecek Info->Next = NULL; 236 1.1.1.6.2.2 jdolecek return (Info); 237 1.1.1.6.2.2 jdolecek } 238 1.1.1.6.2.2 jdolecek 239 1.1.1.6.2.2 jdolecek /* Sort on source DeviceName first */ 240 1.1.1.6.2.2 jdolecek 241 1.1.1.6.2.2 jdolecek while (NextGpio && 242 1.1.1.6.2.2 jdolecek (strcmp (DeviceName, NextGpio->DeviceName) > 0)) 243 1.1.1.6.2.2 jdolecek { 244 1.1.1.6.2.2 jdolecek PrevGpio = NextGpio; 245 1.1.1.6.2.2 jdolecek NextGpio = NextGpio->Next; 246 1.1.1.6.2.2 jdolecek } 247 1.1.1.6.2.2 jdolecek 248 1.1.1.6.2.2 jdolecek /* Now sort on the PinNumber */ 249 1.1.1.6.2.2 jdolecek 250 1.1.1.6.2.2 jdolecek while (NextGpio && 251 1.1.1.6.2.2 jdolecek (NextGpio->PinNumber < PinNumber) && 252 1.1.1.6.2.2 jdolecek !strcmp (DeviceName, NextGpio->DeviceName)) 253 1.1.1.6.2.2 jdolecek { 254 1.1.1.6.2.2 jdolecek PrevGpio = NextGpio; 255 1.1.1.6.2.2 jdolecek NextGpio = NextGpio->Next; 256 1.1.1.6.2.2 jdolecek } 257 1.1.1.6.2.2 jdolecek 258 1.1.1.6.2.2 jdolecek /* Finish the list insertion */ 259 1.1.1.6.2.2 jdolecek 260 1.1.1.6.2.2 jdolecek if (PrevGpio) 261 1.1.1.6.2.2 jdolecek { 262 1.1.1.6.2.2 jdolecek PrevGpio->Next = Info; 263 1.1.1.6.2.2 jdolecek } 264 1.1.1.6.2.2 jdolecek else 265 1.1.1.6.2.2 jdolecek { 266 1.1.1.6.2.2 jdolecek Gbl_GpioList = Info; 267 1.1.1.6.2.2 jdolecek } 268 1.1.1.6.2.2 jdolecek 269 1.1.1.6.2.2 jdolecek Info->Next = NextGpio; 270 1.1.1.6.2.2 jdolecek return (Info); 271 1.1.1.6.2.2 jdolecek } 272 1.1.1.6.2.2 jdolecek 273 1.1.1.6.2.2 jdolecek 274 1.1.1.6.2.2 jdolecek /******************************************************************************* 275 1.1.1.6.2.2 jdolecek * 276 1.1.1.6.2.2 jdolecek * FUNCTION: MpCreateSerialInfo 277 1.1.1.6.2.2 jdolecek * 278 1.1.1.6.2.2 jdolecek * PARAMETERS: DeviceName - The "ResourceSource" name. 279 1.1.1.6.2.2 jdolecek * Address - Physical address for the device 280 1.1.1.6.2.2 jdolecek * 281 1.1.1.6.2.2 jdolecek * RETURN: New Serial info block. 282 1.1.1.6.2.2 jdolecek * 283 1.1.1.6.2.2 jdolecek * DESCRIPTION: Create a new Serial info block and place it on the global list. 284 1.1.1.6.2.2 jdolecek * The list is sorted by Serial device names first, and addresses 285 1.1.1.6.2.2 jdolecek * secondarily. 286 1.1.1.6.2.2 jdolecek * 287 1.1.1.6.2.2 jdolecek ******************************************************************************/ 288 1.1.1.6.2.2 jdolecek 289 1.1.1.6.2.2 jdolecek static ACPI_SERIAL_INFO * 290 1.1.1.6.2.2 jdolecek MpCreateSerialInfo ( 291 1.1.1.6.2.2 jdolecek char *DeviceName, 292 1.1.1.6.2.2 jdolecek UINT16 Address) 293 1.1.1.6.2.2 jdolecek { 294 1.1.1.6.2.2 jdolecek ACPI_SERIAL_INFO *Info; 295 1.1.1.6.2.2 jdolecek ACPI_SERIAL_INFO *NextSerial; 296 1.1.1.6.2.2 jdolecek ACPI_SERIAL_INFO *PrevSerial; 297 1.1.1.6.2.2 jdolecek char *Buffer; 298 1.1.1.6.2.2 jdolecek 299 1.1.1.6.2.2 jdolecek 300 1.1.1.6.2.2 jdolecek /* 301 1.1.1.6.2.2 jdolecek * Allocate a new info block and insert it into the global Serial list 302 1.1.1.6.2.2 jdolecek * sorted by both source device name and then the address. 303 1.1.1.6.2.2 jdolecek */ 304 1.1.1.6.2.2 jdolecek Buffer = UtLocalCacheCalloc (sizeof (ACPI_SERIAL_INFO)); 305 1.1.1.6.2.2 jdolecek Info = ACPI_CAST_PTR (ACPI_SERIAL_INFO, Buffer); 306 1.1.1.6.2.2 jdolecek 307 1.1.1.6.2.2 jdolecek NextSerial = Gbl_SerialList; 308 1.1.1.6.2.2 jdolecek PrevSerial = NULL; 309 1.1.1.6.2.2 jdolecek if (!Gbl_SerialList) 310 1.1.1.6.2.2 jdolecek { 311 1.1.1.6.2.2 jdolecek Gbl_SerialList = Info; 312 1.1.1.6.2.2 jdolecek Info->Next = NULL; 313 1.1.1.6.2.2 jdolecek return (Info); 314 1.1.1.6.2.2 jdolecek } 315 1.1.1.6.2.2 jdolecek 316 1.1.1.6.2.2 jdolecek /* Sort on source DeviceName */ 317 1.1.1.6.2.2 jdolecek 318 1.1.1.6.2.2 jdolecek while (NextSerial && 319 1.1.1.6.2.2 jdolecek (strcmp (DeviceName, NextSerial->DeviceName) > 0)) 320 1.1.1.6.2.2 jdolecek { 321 1.1.1.6.2.2 jdolecek PrevSerial = NextSerial; 322 1.1.1.6.2.2 jdolecek NextSerial = NextSerial->Next; 323 1.1.1.6.2.2 jdolecek } 324 1.1.1.6.2.2 jdolecek 325 1.1.1.6.2.2 jdolecek /* Now sort on the Address */ 326 1.1.1.6.2.2 jdolecek 327 1.1.1.6.2.2 jdolecek while (NextSerial && 328 1.1.1.6.2.2 jdolecek (NextSerial->Address < Address) && 329 1.1.1.6.2.2 jdolecek !strcmp (DeviceName, NextSerial->DeviceName)) 330 1.1.1.6.2.2 jdolecek { 331 1.1.1.6.2.2 jdolecek PrevSerial = NextSerial; 332 1.1.1.6.2.2 jdolecek NextSerial = NextSerial->Next; 333 1.1.1.6.2.2 jdolecek } 334 1.1.1.6.2.2 jdolecek 335 1.1.1.6.2.2 jdolecek /* Finish the list insertion */ 336 1.1.1.6.2.2 jdolecek 337 1.1.1.6.2.2 jdolecek if (PrevSerial) 338 1.1.1.6.2.2 jdolecek { 339 1.1.1.6.2.2 jdolecek PrevSerial->Next = Info; 340 1.1.1.6.2.2 jdolecek } 341 1.1.1.6.2.2 jdolecek else 342 1.1.1.6.2.2 jdolecek { 343 1.1.1.6.2.2 jdolecek Gbl_SerialList = Info; 344 1.1.1.6.2.2 jdolecek } 345 1.1.1.6.2.2 jdolecek 346 1.1.1.6.2.2 jdolecek Info->Next = NextSerial; 347 1.1.1.6.2.2 jdolecek return (Info); 348 1.1.1.6.2.2 jdolecek } 349
Indexes created Tue Sep 30 11:09:46 GMT 2025