Home | History | Annotate | Line # | Download | only in compiler
aslstartup.c revision 1.1.1.4
      1 /******************************************************************************
      2  *
      3  * Module Name: aslstartup - Compiler startup routines, called from main
      4  *
      5  *****************************************************************************/
      6 
      7 /*
      8  * Copyright (C) 2000 - 2014, Intel Corp.
      9  * All rights reserved.
     10  *
     11  * Redistribution and use in source and binary forms, with or without
     12  * modification, are permitted provided that the following conditions
     13  * are met:
     14  * 1. Redistributions of source code must retain the above copyright
     15  *    notice, this list of conditions, and the following disclaimer,
     16  *    without modification.
     17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
     18  *    substantially similar to the "NO WARRANTY" disclaimer below
     19  *    ("Disclaimer") and any redistribution must be conditioned upon
     20  *    including a substantially similar Disclaimer requirement for further
     21  *    binary redistribution.
     22  * 3. Neither the names of the above-listed copyright holders nor the names
     23  *    of any contributors may be used to endorse or promote products derived
     24  *    from this software without specific prior written permission.
     25  *
     26  * Alternatively, this software may be distributed under the terms of the
     27  * GNU General Public License ("GPL") version 2 as published by the Free
     28  * Software Foundation.
     29  *
     30  * NO WARRANTY
     31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
     34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
     35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
     39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
     40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     41  * POSSIBILITY OF SUCH DAMAGES.
     42  */
     43 
     44 #include "aslcompiler.h"
     45 #include "actables.h"
     46 #include "acdisasm.h"
     47 #include "acapps.h"
     48 
     49 #define _COMPONENT          ACPI_COMPILER
     50         ACPI_MODULE_NAME    ("aslstartup")
     51 
     52 
     53 /* Local prototypes */
     54 
     55 static UINT8
     56 AslDetectSourceFileType (
     57     ASL_FILE_INFO           *Info);
     58 
     59 static ACPI_STATUS
     60 AslDoDisassembly (
     61     void);
     62 
     63 
     64 /* Globals */
     65 
     66 static BOOLEAN          AslToFile = TRUE;
     67 
     68 
     69 /*******************************************************************************
     70  *
     71  * FUNCTION:    AslInitializeGlobals
     72  *
     73  * PARAMETERS:  None
     74  *
     75  * RETURN:      None
     76  *
     77  * DESCRIPTION: Re-initialize globals needed to restart the compiler. This
     78  *              allows multiple files to be disassembled and/or compiled.
     79  *
     80  ******************************************************************************/
     81 
     82 void
     83 AslInitializeGlobals (
     84     void)
     85 {
     86     UINT32                  i;
     87 
     88 
     89     /* Init compiler globals */
     90 
     91     Gbl_CurrentColumn = 0;
     92     Gbl_CurrentLineNumber = 1;
     93     Gbl_LogicalLineNumber = 1;
     94     Gbl_CurrentLineOffset = 0;
     95     Gbl_InputFieldCount = 0;
     96     Gbl_InputByteCount = 0;
     97     Gbl_NsLookupCount = 0;
     98     Gbl_LineBufPtr = Gbl_CurrentLineBuffer;
     99 
    100     Gbl_ErrorLog = NULL;
    101     Gbl_NextError = NULL;
    102     Gbl_Signature = NULL;
    103     Gbl_FileType = 0;
    104 
    105     TotalExecutableOpcodes = 0;
    106     TotalNamedObjects = 0;
    107     TotalKeywords = 0;
    108     TotalParseNodes = 0;
    109     TotalMethods = 0;
    110     TotalAllocations = 0;
    111     TotalAllocated = 0;
    112     TotalFolds = 0;
    113 
    114     AslGbl_NextEvent = 0;
    115     for (i = 0; i < ASL_NUM_REPORT_LEVELS; i++)
    116     {
    117         Gbl_ExceptionCount[i] = 0;
    118     }
    119 
    120     for (i = ASL_FILE_INPUT; i <= ASL_MAX_FILE_TYPE; i++)
    121     {
    122         Gbl_Files[i].Handle = NULL;
    123         Gbl_Files[i].Filename = NULL;
    124     }
    125 }
    126 
    127 
    128 /*******************************************************************************
    129  *
    130  * FUNCTION:    AslDetectSourceFileType
    131  *
    132  * PARAMETERS:  Info            - Name/Handle for the file (must be open)
    133  *
    134  * RETURN:      File Type
    135  *
    136  * DESCRIPTION: Determine the type of the input file. Either binary (contains
    137  *              non-ASCII characters), ASL file, or an ACPI Data Table file.
    138  *
    139  ******************************************************************************/
    140 
    141 static UINT8
    142 AslDetectSourceFileType (
    143     ASL_FILE_INFO           *Info)
    144 {
    145     char                    *FileChar;
    146     UINT8                   Type;
    147     ACPI_STATUS             Status;
    148 
    149 
    150     /* Check for a valid binary ACPI table */
    151 
    152     Status = FlCheckForAcpiTable (Info->Handle);
    153     if (ACPI_SUCCESS (Status))
    154     {
    155         Type = ASL_INPUT_TYPE_ACPI_TABLE;
    156         goto Cleanup;
    157     }
    158 
    159     /* Check for 100% ASCII source file (comments are ignored) */
    160 
    161     Status = FlCheckForAscii (Info->Handle, Info->Filename, TRUE);
    162     if (ACPI_FAILURE (Status))
    163     {
    164         printf ("Non-ascii input file - %s\n", Info->Filename);
    165 
    166         if (!Gbl_IgnoreErrors)
    167         {
    168             Type = ASL_INPUT_TYPE_BINARY;
    169             goto Cleanup;
    170         }
    171     }
    172 
    173     /*
    174      * File is ASCII. Determine if this is an ASL file or an ACPI data
    175      * table file.
    176      */
    177     while (fgets (Gbl_CurrentLineBuffer, Gbl_LineBufferSize, Info->Handle))
    178     {
    179         /* Uppercase the buffer for caseless compare */
    180 
    181         FileChar = Gbl_CurrentLineBuffer;
    182         while (*FileChar)
    183         {
    184             *FileChar = (char) toupper ((int) *FileChar);
    185             FileChar++;
    186         }
    187 
    188         /* Presence of "DefinitionBlock" indicates actual ASL code */
    189 
    190         if (strstr (Gbl_CurrentLineBuffer, "DEFINITIONBLOCK"))
    191         {
    192             /* Appears to be an ASL file */
    193 
    194             Type = ASL_INPUT_TYPE_ASCII_ASL;
    195             goto Cleanup;
    196         }
    197     }
    198 
    199     /* Not an ASL source file, default to a data table source file */
    200 
    201     Type = ASL_INPUT_TYPE_ASCII_DATA;
    202 
    203 Cleanup:
    204 
    205     /* Must seek back to the start of the file */
    206 
    207     fseek (Info->Handle, 0, SEEK_SET);
    208     return (Type);
    209 }
    210 
    211 
    212 /*******************************************************************************
    213  *
    214  * FUNCTION:    AslDoDisassembly
    215  *
    216  * PARAMETERS:  None
    217  *
    218  * RETURN:      Status
    219  *
    220  * DESCRIPTION: Initiate AML file disassembly. Uses ACPICA subsystem to build
    221  *              namespace.
    222  *
    223  ******************************************************************************/
    224 
    225 static ACPI_STATUS
    226 AslDoDisassembly (
    227     void)
    228 {
    229     ACPI_STATUS             Status;
    230 
    231 
    232     /* ACPICA subsystem initialization */
    233 
    234     Status = AdInitialize ();
    235     if (ACPI_FAILURE (Status))
    236     {
    237         return (Status);
    238     }
    239 
    240     Status = AcpiAllocateRootTable (4);
    241     if (ACPI_FAILURE (Status))
    242     {
    243         AcpiOsPrintf ("Could not initialize ACPI Table Manager, %s\n",
    244             AcpiFormatException (Status));
    245         return (Status);
    246     }
    247 
    248     /* This is where the disassembly happens */
    249 
    250     AcpiGbl_DbOpt_disasm = TRUE;
    251     Status = AdAmlDisassemble (AslToFile,
    252         Gbl_Files[ASL_FILE_INPUT].Filename, Gbl_OutputFilenamePrefix,
    253         &Gbl_Files[ASL_FILE_INPUT].Filename);
    254     if (ACPI_FAILURE (Status))
    255     {
    256         return (Status);
    257     }
    258 
    259     /* Check if any control methods were unresolved */
    260 
    261     AcpiDmUnresolvedWarning (0);
    262 
    263 #if 0
    264     /* TBD: Handle additional output files for disassembler */
    265 
    266     Status = FlOpenMiscOutputFiles (Gbl_OutputFilenamePrefix);
    267     NsDisplayNamespace ();
    268 #endif
    269 
    270     /* Shutdown compiler and ACPICA subsystem */
    271 
    272     AeClearErrorLog ();
    273     (void) AcpiTerminate ();
    274 
    275     /*
    276      * Gbl_Files[ASL_FILE_INPUT].Filename was replaced with the
    277      * .DSL disassembly file, which can now be compiled if requested
    278      */
    279     if (Gbl_DoCompile)
    280     {
    281         AcpiOsPrintf ("\nCompiling \"%s\"\n",
    282             Gbl_Files[ASL_FILE_INPUT].Filename);
    283         return (AE_CTRL_CONTINUE);
    284     }
    285 
    286     /* No need to free the filename string */
    287 
    288     Gbl_Files[ASL_FILE_INPUT].Filename = NULL;
    289 
    290     CmDeleteCaches ();
    291     return (AE_OK);
    292 }
    293 
    294 
    295 /*******************************************************************************
    296  *
    297  * FUNCTION:    AslDoOneFile
    298  *
    299  * PARAMETERS:  Filename        - Name of the file
    300  *
    301  * RETURN:      Status
    302  *
    303  * DESCRIPTION: Process a single file - either disassemble, compile, or both
    304  *
    305  ******************************************************************************/
    306 
    307 ACPI_STATUS
    308 AslDoOneFile (
    309     char                    *Filename)
    310 {
    311     ACPI_STATUS             Status;
    312 
    313 
    314     /* Re-initialize "some" compiler/preprocessor globals */
    315 
    316     AslInitializeGlobals ();
    317     PrInitializeGlobals ();
    318 
    319     /*
    320      * Extract the directory path. This path is used for possible include
    321      * files and the optional AML filename embedded in the input file
    322      * DefinitionBlock declaration.
    323      */
    324     Status = FlSplitInputPathname (Filename, &Gbl_DirectoryPath, NULL);
    325     if (ACPI_FAILURE (Status))
    326     {
    327         return (Status);
    328     }
    329 
    330     /* Take a copy of the input filename, convert any backslashes */
    331 
    332     Gbl_Files[ASL_FILE_INPUT].Filename =
    333         UtStringCacheCalloc (strlen (Filename) + 1);
    334 
    335     strcpy (Gbl_Files[ASL_FILE_INPUT].Filename, Filename);
    336     UtConvertBackslashes (Gbl_Files[ASL_FILE_INPUT].Filename);
    337 
    338     /*
    339      * AML Disassembly (Optional)
    340      */
    341     if (Gbl_DisasmFlag)
    342     {
    343         Status = AslDoDisassembly ();
    344         if (Status != AE_CTRL_CONTINUE)
    345         {
    346             return (Status);
    347         }
    348     }
    349 
    350     /*
    351      * Open the input file. Here, this should be an ASCII source file,
    352      * either an ASL file or a Data Table file
    353      */
    354     Status = FlOpenInputFile (Gbl_Files[ASL_FILE_INPUT].Filename);
    355     if (ACPI_FAILURE (Status))
    356     {
    357         AePrintErrorLog (ASL_FILE_STDERR);
    358         return (AE_ERROR);
    359     }
    360 
    361     /* Determine input file type */
    362 
    363     Gbl_FileType = AslDetectSourceFileType (&Gbl_Files[ASL_FILE_INPUT]);
    364     if (Gbl_FileType == ASL_INPUT_TYPE_BINARY)
    365     {
    366         return (AE_ERROR);
    367     }
    368 
    369     /*
    370      * If -p not specified, we will use the input filename as the
    371      * output filename prefix
    372      */
    373     if (Gbl_UseDefaultAmlFilename)
    374     {
    375         Gbl_OutputFilenamePrefix = Gbl_Files[ASL_FILE_INPUT].Filename;
    376     }
    377 
    378     /* Open the optional output files (listings, etc.) */
    379 
    380     Status = FlOpenMiscOutputFiles (Gbl_OutputFilenamePrefix);
    381     if (ACPI_FAILURE (Status))
    382     {
    383         AePrintErrorLog (ASL_FILE_STDERR);
    384         return (AE_ERROR);
    385     }
    386 
    387     /*
    388      * Compilation of ASL source versus DataTable source uses different
    389      * compiler subsystems
    390      */
    391     switch (Gbl_FileType)
    392     {
    393     /*
    394      * Data Table Compilation
    395      */
    396     case ASL_INPUT_TYPE_ASCII_DATA:
    397 
    398         Status = DtDoCompile ();
    399         if (ACPI_FAILURE (Status))
    400         {
    401             return (Status);
    402         }
    403 
    404         if (Gbl_Signature)
    405         {
    406             Gbl_Signature = NULL;
    407         }
    408 
    409         /* Check if any errors occurred during compile */
    410 
    411         Status = AslCheckForErrorExit ();
    412         if (ACPI_FAILURE (Status))
    413         {
    414             return (Status);
    415         }
    416 
    417         /* Cleanup (for next source file) and exit */
    418 
    419         AeClearErrorLog ();
    420         PrTerminatePreprocessor ();
    421         return (Status);
    422 
    423     /*
    424      * ASL Compilation
    425      */
    426     case ASL_INPUT_TYPE_ASCII_ASL:
    427 
    428         /* ACPICA subsystem initialization */
    429 
    430         Status = AdInitialize ();
    431         if (ACPI_FAILURE (Status))
    432         {
    433             return (Status);
    434         }
    435 
    436         (void) CmDoCompile ();
    437         (void) AcpiTerminate ();
    438 
    439         /* Check if any errors occurred during compile */
    440 
    441         Status = AslCheckForErrorExit ();
    442         if (ACPI_FAILURE (Status))
    443         {
    444             return (Status);
    445         }
    446 
    447         /* Cleanup (for next source file) and exit */
    448 
    449         AeClearErrorLog ();
    450         PrTerminatePreprocessor ();
    451         return (AE_OK);
    452 
    453     /*
    454      * Binary ACPI table was auto-detected, disassemble it
    455      */
    456     case ASL_INPUT_TYPE_ACPI_TABLE:
    457 
    458         /* We have what appears to be an ACPI table, disassemble it */
    459 
    460         FlCloseFile (ASL_FILE_INPUT);
    461         Gbl_DoCompile = FALSE;
    462         Gbl_DisasmFlag = TRUE;
    463         Status = AslDoDisassembly ();
    464         return (Status);
    465 
    466     /* Unknown binary table */
    467 
    468     case ASL_INPUT_TYPE_BINARY:
    469 
    470         AePrintErrorLog (ASL_FILE_STDERR);
    471         return (AE_ERROR);
    472 
    473     default:
    474 
    475         printf ("Unknown file type %X\n", Gbl_FileType);
    476         return (AE_ERROR);
    477     }
    478 }
    479 
    480 
    481 /*******************************************************************************
    482  *
    483  * FUNCTION:    AslCheckForErrorExit
    484  *
    485  * PARAMETERS:  None. Examines global exception count array
    486  *
    487  * RETURN:      Status
    488  *
    489  * DESCRIPTION: Determine if compiler should abort with error status
    490  *
    491  ******************************************************************************/
    492 
    493 ACPI_STATUS
    494 AslCheckForErrorExit (
    495     void)
    496 {
    497 
    498     /*
    499      * Return non-zero exit code if there have been errors, unless the
    500      * global ignore error flag has been set
    501      */
    502     if (!Gbl_IgnoreErrors)
    503     {
    504         if (Gbl_ExceptionCount[ASL_ERROR] > 0)
    505         {
    506             return (AE_ERROR);
    507         }
    508 
    509         /* Optionally treat warnings as errors */
    510 
    511         if (Gbl_WarningsAsErrors)
    512         {
    513             if ((Gbl_ExceptionCount[ASL_WARNING] > 0)  ||
    514                 (Gbl_ExceptionCount[ASL_WARNING2] > 0) ||
    515                 (Gbl_ExceptionCount[ASL_WARNING3] > 0))
    516             {
    517                 return (AE_ERROR);
    518             }
    519         }
    520     }
    521 
    522     return (AE_OK);
    523 }
    524