xref: /src/sys/external/bsd/acpica/dist/debugger/dbmethod.c

/*******************************************************************************
 *
 * Module Name: dbmethod - Debug commands for control methods
 *
 ******************************************************************************/

/*
 * Copyright (C) 2000 - 2013, Intel Corp.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */


#include "acpi.h"
#include "accommon.h"
#include "acdispat.h"
#include "acnamesp.h"
#include "acdebug.h"
#include "acdisasm.h"
#include "acparser.h"
#include "acpredef.h"


#ifdef ACPI_DEBUGGER

#define _COMPONENT          ACPI_CA_DEBUGGER
        ACPI_MODULE_NAME    ("dbmethod")


/* Local prototypes */

static ACPI_STATUS
AcpiDbWalkForExecute (
    ACPI_HANDLE             ObjHandle,
    UINT32                  NestingLevel,
    void                    *Context,
    void                    **ReturnValue);


/*******************************************************************************
 *
 * FUNCTION:    AcpiDbSetMethodBreakpoint
 *
 * PARAMETERS:  Location            - AML offset of breakpoint
 *              WalkState           - Current walk info
 *              Op                  - Current Op (from parse walk)
 *
 * RETURN:      None
 *
 * DESCRIPTION: Set a breakpoint in a control method at the specified
 *              AML offset
 *
 ******************************************************************************/

void
AcpiDbSetMethodBreakpoint (
    char                    *Location,
    ACPI_WALK_STATE         *WalkState,
    ACPI_PARSE_OBJECT       *Op)
{
    UINT32                  Address;


    if (!Op)
    {
        AcpiOsPrintf ("There is no method currently executing\n");
        return;
    }

    /* Get and verify the breakpoint address */

    Address = ACPI_STRTOUL (Location, NULL, 16);
    if (Address <= Op->Common.AmlOffset)
    {
        AcpiOsPrintf ("Breakpoint %X is beyond current address %X\n",
            Address, Op->Common.AmlOffset);
    }

    /* Save breakpoint in current walk */

    WalkState->UserBreakpoint = Address;
    AcpiOsPrintf ("Breakpoint set at AML offset %X\n", Address);
}


/*******************************************************************************
 *
 * FUNCTION:    AcpiDbSetMethodCallBreakpoint
 *
 * PARAMETERS:  Op                  - Current Op (from parse walk)
 *
 * RETURN:      None
 *
 * DESCRIPTION: Set a breakpoint in a control method at the specified
 *              AML offset
 *
 ******************************************************************************/

void
AcpiDbSetMethodCallBreakpoint (
    ACPI_PARSE_OBJECT       *Op)
{


    if (!Op)
    {
        AcpiOsPrintf ("There is no method currently executing\n");
        return;
    }

    AcpiGbl_StepToNextCall = TRUE;
}


/*******************************************************************************
 *
 * FUNCTION:    AcpiDbSetMethodData
 *
 * PARAMETERS:  TypeArg         - L for local, A for argument
 *              IndexArg        - which one
 *              ValueArg        - Value to set.
 *
 * RETURN:      None
 *
 * DESCRIPTION: Set a local or argument for the running control method.
 *              NOTE: only object supported is Number.
 *
 ******************************************************************************/

void
AcpiDbSetMethodData (
    char                    *TypeArg,
    char                    *IndexArg,
    char                    *ValueArg)
{
    char                    Type;
    UINT32                  Index;
    UINT32                  Value;
    ACPI_WALK_STATE         *WalkState;
    ACPI_OPERAND_OBJECT     *ObjDesc;
    ACPI_STATUS             Status;
    ACPI_NAMESPACE_NODE     *Node;


    /* Validate TypeArg */

    AcpiUtStrupr (TypeArg);
    Type = TypeArg[0];
    if ((Type != 'L') &&
        (Type != 'A') &&
        (Type != 'N'))
    {
        AcpiOsPrintf ("Invalid SET operand: %s\n", TypeArg);
        return;
    }

    Value = ACPI_STRTOUL (ValueArg, NULL, 16);

    if (Type == 'N')
    {
        Node = AcpiDbConvertToNode (IndexArg);
        if (Node->Type != ACPI_TYPE_INTEGER)
        {
            AcpiOsPrintf ("Can only set Integer nodes\n");
            return;
        }
        ObjDesc = Node->Object;
        ObjDesc->Integer.Value = Value;
        return;
    }

    /* Get the index and value */

    Index = ACPI_STRTOUL (IndexArg, NULL, 16);

    WalkState = AcpiDsGetCurrentWalkState (AcpiGbl_CurrentWalkList);
    if (!WalkState)
    {
        AcpiOsPrintf ("There is no method currently executing\n");
        return;
    }

    /* Create and initialize the new object */

    ObjDesc = AcpiUtCreateIntegerObject ((UINT64) Value);
    if (!ObjDesc)
    {
        AcpiOsPrintf ("Could not create an internal object\n");
        return;
    }

    /* Store the new object into the target */

    switch (Type)
    {
    case 'A':

        /* Set a method argument */

        if (Index > ACPI_METHOD_MAX_ARG)
        {
            AcpiOsPrintf ("Arg%u - Invalid argument name\n", Index);
            goto Cleanup;
        }

        Status = AcpiDsStoreObjectToLocal (ACPI_REFCLASS_ARG, Index, ObjDesc,
                    WalkState);
        if (ACPI_FAILURE (Status))
        {
            goto Cleanup;
        }

        ObjDesc = WalkState->Arguments[Index].Object;

        AcpiOsPrintf ("Arg%u: ", Index);
        AcpiDmDisplayInternalObject (ObjDesc, WalkState);
        break;

    case 'L':

        /* Set a method local */

        if (Index > ACPI_METHOD_MAX_LOCAL)
        {
            AcpiOsPrintf ("Local%u - Invalid local variable name\n", Index);
            goto Cleanup;
        }

        Status = AcpiDsStoreObjectToLocal (ACPI_REFCLASS_LOCAL, Index, ObjDesc,
                    WalkState);
        if (ACPI_FAILURE (Status))
        {
            goto Cleanup;
        }

        ObjDesc = WalkState->LocalVariables[Index].Object;

        AcpiOsPrintf ("Local%u: ", Index);
        AcpiDmDisplayInternalObject (ObjDesc, WalkState);
        break;

    default:

        break;
    }

Cleanup:
    AcpiUtRemoveReference (ObjDesc);
}


/*******************************************************************************
 *
 * FUNCTION:    AcpiDbDisassembleAml
 *
 * PARAMETERS:  Statements          - Number of statements to disassemble
 *              Op                  - Current Op (from parse walk)
 *
 * RETURN:      None
 *
 * DESCRIPTION: Display disassembled AML (ASL) starting from Op for the number
 *              of statements specified.
 *
 ******************************************************************************/

void
AcpiDbDisassembleAml (
    char                    *Statements,
    ACPI_PARSE_OBJECT       *Op)
{
    UINT32                  NumStatements = 8;


    if (!Op)
    {
        AcpiOsPrintf ("There is no method currently executing\n");
        return;
    }

    if (Statements)
    {
        NumStatements = ACPI_STRTOUL (Statements, NULL, 0);
    }

    AcpiDmDisassemble (NULL, Op, NumStatements);
}


/*******************************************************************************
 *
 * FUNCTION:    AcpiDbDisassembleMethod
 *
 * PARAMETERS:  Name            - Name of control method
 *
 * RETURN:      None
 *
 * DESCRIPTION: Display disassembled AML (ASL) starting from Op for the number
 *              of statements specified.
 *
 ******************************************************************************/

ACPI_STATUS
AcpiDbDisassembleMethod (
    char                    *Name)
{
    ACPI_STATUS             Status;
    ACPI_PARSE_OBJECT       *Op;
    ACPI_WALK_STATE         *WalkState;
    ACPI_OPERAND_OBJECT     *ObjDesc;
    ACPI_NAMESPACE_NODE     *Method;


    Method = AcpiDbConvertToNode (Name);
    if (!Method)
    {
        return (AE_BAD_PARAMETER);
    }

    if (Method->Type != ACPI_TYPE_METHOD)
    {
        ACPI_ERROR ((AE_INFO, "%s (%s): Object must be a control method",
            Name, AcpiUtGetTypeName (Method->Type)));
        return (AE_BAD_PARAMETER);
    }

    ObjDesc = Method->Object;

    Op = AcpiPsCreateScopeOp ();
    if (!Op)
    {
        return (AE_NO_MEMORY);
    }

    /* Create and initialize a new walk state */

    WalkState = AcpiDsCreateWalkState (0, Op, NULL, NULL);
    if (!WalkState)
    {
        return (AE_NO_MEMORY);
    }

    Status = AcpiDsInitAmlWalk (WalkState, Op, NULL,
        ObjDesc->Method.AmlStart,
        ObjDesc->Method.AmlLength, NULL, ACPI_IMODE_LOAD_PASS1);
    if (ACPI_FAILURE (Status))
    {
        return (Status);
    }

    Status = AcpiUtAllocateOwnerId (&ObjDesc->Method.OwnerId);
    WalkState->OwnerId = ObjDesc->Method.OwnerId;

    /* Push start scope on scope stack and make it current */

    Status = AcpiDsScopeStackPush (Method,
        Method->Type, WalkState);
    if (ACPI_FAILURE (Status))
    {
        return (Status);
    }

    /* Parse the entire method AML including deferred operators */

    WalkState->ParseFlags &= ~ACPI_PARSE_DELETE_TREE;
    WalkState->ParseFlags |= ACPI_PARSE_DISASSEMBLE;

    Status = AcpiPsParseAml (WalkState);
    (void) AcpiDmParseDeferredOps (Op);

    /* Now we can disassemble the method */

    AcpiGbl_DbOpt_verbose = FALSE;
    AcpiDmDisassemble (NULL, Op, 0);
    AcpiGbl_DbOpt_verbose = TRUE;

    AcpiPsDeleteParseTree (Op);

    /* Method cleanup */

    AcpiNsDeleteNamespaceSubtree (Method);
    AcpiNsDeleteNamespaceByOwner (ObjDesc->Method.OwnerId);
    AcpiUtReleaseOwnerId (&ObjDesc->Method.OwnerId);
    return (AE_OK);
}


/*******************************************************************************
 *
 * FUNCTION:    AcpiDbWalkForExecute
 *
 * PARAMETERS:  Callback from WalkNamespace
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Batch execution module. Currently only executes predefined
 *              ACPI names.
 *
 ******************************************************************************/

static ACPI_STATUS
AcpiDbWalkForExecute (
    ACPI_HANDLE             ObjHandle,
    UINT32                  NestingLevel,
    void                    *Context,
    void                    **ReturnValue)
{
    ACPI_NAMESPACE_NODE         *Node = (ACPI_NAMESPACE_NODE *) ObjHandle;
    ACPI_DB_EXECUTE_WALK        *Info = (ACPI_DB_EXECUTE_WALK *) Context;
    char                        *Pathname;
    const ACPI_PREDEFINED_INFO  *Predefined;
    ACPI_DEVICE_INFO            *ObjInfo;
    ACPI_OBJECT_LIST            ParamObjects;
    ACPI_OBJECT                 Params[ACPI_METHOD_NUM_ARGS];
    ACPI_OBJECT                 *ThisParam;
    ACPI_BUFFER                 ReturnObj;
    ACPI_STATUS                 Status;
    UINT16                      ArgTypeList;
    UINT8                       ArgCount;
    UINT8                       ArgType;
    UINT32                      i;


    /* The name must be a predefined ACPI name */

    Predefined = AcpiUtMatchPredefinedMethod (Node->Name.Ascii);
    if (!Predefined)
    {
        return (AE_OK);
    }

    if (Node->Type == ACPI_TYPE_LOCAL_SCOPE)
    {
        return (AE_OK);
    }

    Pathname = AcpiNsGetExternalPathname (Node);
    if (!Pathname)
    {
        return (AE_OK);
    }

    /* Get the object info for number of method parameters */

    Status = AcpiGetObjectInfo (ObjHandle, &ObjInfo);
    if (ACPI_FAILURE (Status))
    {
        return (Status);
    }

    ParamObjects.Count = 0;
    ParamObjects.Pointer = NULL;

    if (ObjInfo->Type == ACPI_TYPE_METHOD)
    {
        /* Setup default parameters (with proper types) */

        ArgTypeList = Predefined->Info.ArgumentList;
        ArgCount = METHOD_GET_ARG_COUNT (ArgTypeList);

        /*
         * Setup the ACPI-required number of arguments, regardless of what
         * the actual method defines. If there is a difference, then the
         * method is wrong and a warning will be issued during execution.
         */
        ThisParam = Params;
        for (i = 0; i < ArgCount; i++)
        {
            ArgType = METHOD_GET_NEXT_TYPE (ArgTypeList);
            ThisParam->Type = ArgType;

            switch (ArgType)
            {
            case ACPI_TYPE_INTEGER:

                ThisParam->Integer.Value = 1;
                break;

            case ACPI_TYPE_STRING:

                ThisParam->String.Pointer = __UNCONST(
		    "This is the default argument string");
                ThisParam->String.Length = ACPI_STRLEN (ThisParam->String.Pointer);
                break;

            case ACPI_TYPE_BUFFER:

                ThisParam->Buffer.Pointer = (UINT8 *) Params; /* just a garbage buffer */
                ThisParam->Buffer.Length = 48;
                break;

             case ACPI_TYPE_PACKAGE:

                ThisParam->Package.Elements = NULL;
                ThisParam->Package.Count = 0;
                break;

           default:

                AcpiOsPrintf ("%s: Unsupported argument type: %u\n",
                    Pathname, ArgType);
                break;
            }

            ThisParam++;
        }

        ParamObjects.Count = ArgCount;
        ParamObjects.Pointer = Params;
    }

    ACPI_FREE (ObjInfo);
    ReturnObj.Pointer = NULL;
    ReturnObj.Length = ACPI_ALLOCATE_BUFFER;

    /* Do the actual method execution */

    AcpiGbl_MethodExecuting = TRUE;

    Status = AcpiEvaluateObject (Node, NULL, &ParamObjects, &ReturnObj);

    AcpiOsPrintf ("%-32s returned %s\n", Pathname, AcpiFormatException (Status));
    AcpiGbl_MethodExecuting = FALSE;
    ACPI_FREE (Pathname);

    /* Ignore status from method execution */

    Status = AE_OK;

    /* Update count, check if we have executed enough methods */

    Info->Count++;
    if (Info->Count >= Info->MaxCount)
    {
        Status = AE_CTRL_TERMINATE;
    }

    return (Status);
}


/*******************************************************************************
 *
 * FUNCTION:    AcpiDbBatchExecute
 *
 * PARAMETERS:  CountArg            - Max number of methods to execute
 *
 * RETURN:      None
 *
 * DESCRIPTION: Namespace batch execution. Execute predefined names in the
 *              namespace, up to the max count, if specified.
 *
 ******************************************************************************/

void
AcpiDbBatchExecute (
    char                    *CountArg)
{
    ACPI_DB_EXECUTE_WALK    Info;


    Info.Count = 0;
    Info.MaxCount = ACPI_UINT32_MAX;

    if (CountArg)
    {
        Info.MaxCount = ACPI_STRTOUL (CountArg, NULL, 0);
    }


    /* Search all nodes in namespace */

    (void) AcpiWalkNamespace (ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX,
                AcpiDbWalkForExecute, NULL, (void *) &Info, NULL);

    AcpiOsPrintf ("Evaluated %u predefined names in the namespace\n", Info.Count);
}

#endif /* ACPI_DEBUGGER */