Home | History | Annotate | Line # | Download | only in events
evxfregn.c revision 1.1.1.15
      1 /******************************************************************************
      2  *
      3  * Module Name: evxfregn - External Interfaces, ACPI Operation Regions and
      4  *                         Address Spaces.
      5  *
      6  *****************************************************************************/
      7 
      8 /*
      9  * Copyright (C) 2000 - 2023, Intel Corp.
     10  * All rights reserved.
     11  *
     12  * Redistribution and use in source and binary forms, with or without
     13  * modification, are permitted provided that the following conditions
     14  * are met:
     15  * 1. Redistributions of source code must retain the above copyright
     16  *    notice, this list of conditions, and the following disclaimer,
     17  *    without modification.
     18  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
     19  *    substantially similar to the "NO WARRANTY" disclaimer below
     20  *    ("Disclaimer") and any redistribution must be conditioned upon
     21  *    including a substantially similar Disclaimer requirement for further
     22  *    binary redistribution.
     23  * 3. Neither the names of the above-listed copyright holders nor the names
     24  *    of any contributors may be used to endorse or promote products derived
     25  *    from this software without specific prior written permission.
     26  *
     27  * Alternatively, this software may be distributed under the terms of the
     28  * GNU General Public License ("GPL") version 2 as published by the Free
     29  * Software Foundation.
     30  *
     31  * NO WARRANTY
     32  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     33  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     34  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
     35  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
     36  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     37  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     38  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     39  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
     40  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
     41  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     42  * POSSIBILITY OF SUCH DAMAGES.
     43  */
     44 
     45 #define EXPORT_ACPI_INTERFACES
     46 
     47 #include "acpi.h"
     48 #include "accommon.h"
     49 #include "acnamesp.h"
     50 #include "acevents.h"
     51 
     52 #define _COMPONENT          ACPI_EVENTS
     53         ACPI_MODULE_NAME    ("evxfregn")
     54 
     55 
     56 /*******************************************************************************
     57  *
     58  * FUNCTION:    AcpiInstallAddressSpaceHandlerInternal
     59  *
     60  * PARAMETERS:  Device          - Handle for the device
     61  *              SpaceId         - The address space ID
     62  *              Handler         - Address of the handler
     63  *              Setup           - Address of the setup function
     64  *              Context         - Value passed to the handler on each access
     65  *              Run_Reg         - Run _REG methods for this address space?
     66  *
     67  * RETURN:      Status
     68  *
     69  * DESCRIPTION: Install a handler for all OpRegions of a given SpaceId.
     70  *
     71  * NOTE: This function should only be called after AcpiEnableSubsystem has
     72  * been called. This is because any _REG methods associated with the Space ID
     73  * are executed here, and these methods can only be safely executed after
     74  * the default handlers have been installed and the hardware has been
     75  * initialized (via AcpiEnableSubsystem.)
     76  * To avoid this problem pass FALSE for Run_Reg and later on call
     77  * AcpiExecuteRegMethods() to execute _REG.
     78  *
     79  ******************************************************************************/
     80 
     81 static ACPI_STATUS
     82 AcpiInstallAddressSpaceHandlerInternal (
     83     ACPI_HANDLE             Device,
     84     ACPI_ADR_SPACE_TYPE     SpaceId,
     85     ACPI_ADR_SPACE_HANDLER  Handler,
     86     ACPI_ADR_SPACE_SETUP    Setup,
     87     void                    *Context,
     88     BOOLEAN                 Run_Reg)
     89 {
     90     ACPI_NAMESPACE_NODE     *Node;
     91     ACPI_STATUS             Status;
     92 
     93 
     94     ACPI_FUNCTION_TRACE (AcpiInstallAddressSpaceHandler);
     95 
     96 
     97     /* Parameter validation */
     98 
     99     if (!Device)
    100     {
    101         return_ACPI_STATUS (AE_BAD_PARAMETER);
    102     }
    103 
    104     Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE);
    105     if (ACPI_FAILURE (Status))
    106     {
    107         return_ACPI_STATUS (Status);
    108     }
    109 
    110     /* Convert and validate the device handle */
    111 
    112     Node = AcpiNsValidateHandle (Device);
    113     if (!Node)
    114     {
    115         Status = AE_BAD_PARAMETER;
    116         goto UnlockAndExit;
    117     }
    118 
    119     /* Install the handler for all Regions for this Space ID */
    120 
    121     Status = AcpiEvInstallSpaceHandler (
    122         Node, SpaceId, Handler, Setup, Context);
    123     if (ACPI_FAILURE (Status))
    124     {
    125         goto UnlockAndExit;
    126     }
    127 
    128     /* Run all _REG methods for this address space */
    129 
    130     if (Run_Reg)
    131     {
    132         AcpiEvExecuteRegMethods (Node, SpaceId, ACPI_REG_CONNECT);
    133     }
    134 
    135 UnlockAndExit:
    136     (void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE);
    137     return_ACPI_STATUS (Status);
    138 }
    139 
    140 ACPI_STATUS
    141 AcpiInstallAddressSpaceHandler (
    142     ACPI_HANDLE             Device,
    143     ACPI_ADR_SPACE_TYPE     SpaceId,
    144     ACPI_ADR_SPACE_HANDLER  Handler,
    145     ACPI_ADR_SPACE_SETUP    Setup,
    146     void                    *Context)
    147 {
    148     return AcpiInstallAddressSpaceHandlerInternal (Device, SpaceId, Handler, Setup, Context, TRUE);
    149 }
    150 
    151 ACPI_EXPORT_SYMBOL (AcpiInstallAddressSpaceHandler)
    152 
    153 ACPI_STATUS
    154 AcpiInstallAddressSpaceHandlerNo_Reg (
    155     ACPI_HANDLE             Device,
    156     ACPI_ADR_SPACE_TYPE     SpaceId,
    157     ACPI_ADR_SPACE_HANDLER  Handler,
    158     ACPI_ADR_SPACE_SETUP    Setup,
    159     void                    *Context)
    160 {
    161     return AcpiInstallAddressSpaceHandlerInternal (Device, SpaceId, Handler, Setup, Context, FALSE);
    162 }
    163 
    164 ACPI_EXPORT_SYMBOL (AcpiInstallAddressSpaceHandlerNo_Reg)
    165 
    166 
    167 /*******************************************************************************
    168  *
    169  * FUNCTION:    AcpiRemoveAddressSpaceHandler
    170  *
    171  * PARAMETERS:  Device          - Handle for the device
    172  *              SpaceId         - The address space ID
    173  *              Handler         - Address of the handler
    174  *
    175  * RETURN:      Status
    176  *
    177  * DESCRIPTION: Remove a previously installed handler.
    178  *
    179  ******************************************************************************/
    180 
    181 ACPI_STATUS
    182 AcpiRemoveAddressSpaceHandler (
    183     ACPI_HANDLE             Device,
    184     ACPI_ADR_SPACE_TYPE     SpaceId,
    185     ACPI_ADR_SPACE_HANDLER  Handler)
    186 {
    187     ACPI_OPERAND_OBJECT     *ObjDesc;
    188     ACPI_OPERAND_OBJECT     *HandlerObj;
    189     ACPI_OPERAND_OBJECT     *RegionObj;
    190     ACPI_OPERAND_OBJECT     **LastObjPtr;
    191     ACPI_NAMESPACE_NODE     *Node;
    192     ACPI_STATUS             Status;
    193 
    194 
    195     ACPI_FUNCTION_TRACE (AcpiRemoveAddressSpaceHandler);
    196 
    197 
    198     /* Parameter validation */
    199 
    200     if (!Device)
    201     {
    202         return_ACPI_STATUS (AE_BAD_PARAMETER);
    203     }
    204 
    205     Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE);
    206     if (ACPI_FAILURE (Status))
    207     {
    208         return_ACPI_STATUS (Status);
    209     }
    210 
    211     /* Convert and validate the device handle */
    212 
    213     Node = AcpiNsValidateHandle (Device);
    214     if (!Node ||
    215         ((Node->Type != ACPI_TYPE_DEVICE)    &&
    216          (Node->Type != ACPI_TYPE_PROCESSOR) &&
    217          (Node->Type != ACPI_TYPE_THERMAL)   &&
    218          (Node != AcpiGbl_RootNode)))
    219     {
    220         Status = AE_BAD_PARAMETER;
    221         goto UnlockAndExit;
    222     }
    223 
    224     /* Make sure the internal object exists */
    225 
    226     ObjDesc = AcpiNsGetAttachedObject (Node);
    227     if (!ObjDesc)
    228     {
    229         Status = AE_NOT_EXIST;
    230         goto UnlockAndExit;
    231     }
    232 
    233     /* Find the address handler the user requested */
    234 
    235     HandlerObj = ObjDesc->CommonNotify.Handler;
    236     LastObjPtr = &ObjDesc->CommonNotify.Handler;
    237     while (HandlerObj)
    238     {
    239         /* We have a handler, see if user requested this one */
    240 
    241         if (HandlerObj->AddressSpace.SpaceId == SpaceId)
    242         {
    243             /* Handler must be the same as the installed handler */
    244 
    245             if (HandlerObj->AddressSpace.Handler != Handler)
    246             {
    247                 Status = AE_BAD_PARAMETER;
    248                 goto UnlockAndExit;
    249             }
    250 
    251             /* Matched SpaceId, first dereference this in the Regions */
    252 
    253             ACPI_DEBUG_PRINT ((ACPI_DB_OPREGION,
    254                 "Removing address handler %p(%p) for region %s "
    255                 "on Device %p(%p)\n",
    256                 HandlerObj, Handler, AcpiUtGetRegionName (SpaceId),
    257                 Node, ObjDesc));
    258 
    259             RegionObj = HandlerObj->AddressSpace.RegionList;
    260 
    261             /* Walk the handler's region list */
    262 
    263             while (RegionObj)
    264             {
    265                 /*
    266                  * First disassociate the handler from the region.
    267                  *
    268                  * NOTE: this doesn't mean that the region goes away
    269                  * The region is just inaccessible as indicated to
    270                  * the _REG method
    271                  */
    272                 AcpiEvDetachRegion (RegionObj, TRUE);
    273 
    274                 /*
    275                  * Walk the list: Just grab the head because the
    276                  * DetachRegion removed the previous head.
    277                  */
    278                 RegionObj = HandlerObj->AddressSpace.RegionList;
    279             }
    280 
    281             /* Remove this Handler object from the list */
    282 
    283             *LastObjPtr = HandlerObj->AddressSpace.Next;
    284 
    285             /* Now we can delete the handler object */
    286 
    287             AcpiOsReleaseMutex (HandlerObj->AddressSpace.ContextMutex);
    288             AcpiUtRemoveReference (HandlerObj);
    289             goto UnlockAndExit;
    290         }
    291 
    292         /* Walk the linked list of handlers */
    293 
    294         LastObjPtr = &HandlerObj->AddressSpace.Next;
    295         HandlerObj = HandlerObj->AddressSpace.Next;
    296     }
    297 
    298     /* The handler does not exist */
    299 
    300     ACPI_DEBUG_PRINT ((ACPI_DB_OPREGION,
    301         "Unable to remove address handler %p for %s(%X), DevNode %p, obj %p\n",
    302         Handler, AcpiUtGetRegionName (SpaceId), SpaceId, Node, ObjDesc));
    303 
    304     Status = AE_NOT_EXIST;
    305 
    306 UnlockAndExit:
    307     (void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE);
    308     return_ACPI_STATUS (Status);
    309 }
    310 
    311 ACPI_EXPORT_SYMBOL (AcpiRemoveAddressSpaceHandler)
    312 
    313 
    314 /*******************************************************************************
    315  *
    316  * FUNCTION:    AcpiExecuteRegMethods
    317  *
    318  * PARAMETERS:  Device          - Handle for the device
    319  *              SpaceId         - The address space ID
    320  *
    321  * RETURN:      Status
    322  *
    323  * DESCRIPTION: Execute _REG for all OpRegions of a given SpaceId.
    324  *
    325  ******************************************************************************/
    326 
    327 ACPI_STATUS
    328 AcpiExecuteRegMethods (
    329     ACPI_HANDLE             Device,
    330     ACPI_ADR_SPACE_TYPE     SpaceId)
    331 {
    332     ACPI_NAMESPACE_NODE     *Node;
    333     ACPI_STATUS             Status;
    334 
    335 
    336     ACPI_FUNCTION_TRACE (AcpiExecuteRegMethods);
    337 
    338 
    339     /* Parameter validation */
    340 
    341     if (!Device)
    342     {
    343         return_ACPI_STATUS (AE_BAD_PARAMETER);
    344     }
    345 
    346     Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE);
    347     if (ACPI_FAILURE (Status))
    348     {
    349         return_ACPI_STATUS (Status);
    350     }
    351 
    352     /* Convert and validate the device handle */
    353 
    354     Node = AcpiNsValidateHandle (Device);
    355     if (Node)
    356     {
    357         /* Run all _REG methods for this address space */
    358 
    359         AcpiEvExecuteRegMethods (Node, SpaceId, ACPI_REG_CONNECT);
    360     }
    361     else
    362     {
    363         Status = AE_BAD_PARAMETER;
    364     }
    365 
    366     (void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE);
    367     return_ACPI_STATUS (Status);
    368 }
    369 
    370 ACPI_EXPORT_SYMBOL (AcpiExecuteRegMethods)
    371