dist/hardware/hwgpe.c

/******************************************************************************
 *
 * Module Name: hwgpe - Low level GPE enable/disable/clear functions
 *
 *****************************************************************************/

/*
 * Copyright (C) 2000 - 2011, Intel Corp.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */

#include "acpi.h"
#include "accommon.h"
#include "acevents.h"

#define _COMPONENT          ACPI_HARDWARE
        ACPI_MODULE_NAME    ("hwgpe")

/* Local prototypes */

static ACPI_STATUS
AcpiHwEnableWakeupGpeBlock (
    ACPI_GPE_XRUPT_INFO     *GpeXruptInfo,
    ACPI_GPE_BLOCK_INFO     *GpeBlock,
    void                    *Context);


/******************************************************************************
 *
 * FUNCTION:    AcpiHwGetGpeRegisterBit
 *
 * PARAMETERS:  GpeEventInfo        - Info block for the GPE
 *              GpeRegisterInfo     - Info block for the GPE register
 *
 * RETURN:      Register mask with a one in the GPE bit position
 *
 * DESCRIPTION: Compute the register mask for this GPE. One bit is set in the
 *              correct position for the input GPE.
 *
 ******************************************************************************/

UINT32
AcpiHwGetGpeRegisterBit (
    ACPI_GPE_EVENT_INFO     *GpeEventInfo,
    ACPI_GPE_REGISTER_INFO  *GpeRegisterInfo)
{

    return ((UINT32) 1 <<
        (GpeEventInfo->GpeNumber - GpeRegisterInfo->BaseGpeNumber));
}


/******************************************************************************
 *
 * FUNCTION:    AcpiHwLowSetGpe
 *
 * PARAMETERS:  GpeEventInfo        - Info block for the GPE to be disabled
 *              Action              - Enable or disable
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Enable or disable a single GPE in the parent enable register.
 *
 ******************************************************************************/

ACPI_STATUS
AcpiHwLowSetGpe (
    ACPI_GPE_EVENT_INFO     *GpeEventInfo,
    UINT32                  Action)
{
    ACPI_GPE_REGISTER_INFO  *GpeRegisterInfo;
    ACPI_STATUS             Status;
    UINT32                  EnableMask;
    UINT32                  RegisterBit;


    ACPI_FUNCTION_ENTRY ();


    /* Get the info block for the entire GPE register */

    GpeRegisterInfo = GpeEventInfo->RegisterInfo;
    if (!GpeRegisterInfo)
    {
        return (AE_NOT_EXIST);
    }

    /* Get current value of the enable register that contains this GPE */

    Status = AcpiHwRead (&EnableMask, &GpeRegisterInfo->EnableAddress);
    if (ACPI_FAILURE (Status))
    {
        return (Status);
    }

    /* Set or clear just the bit that corresponds to this GPE */

    RegisterBit = AcpiHwGetGpeRegisterBit (GpeEventInfo, GpeRegisterInfo);
    switch (Action)
    {
    case ACPI_GPE_CONDITIONAL_ENABLE:

        /* Only enable if the EnableForRun bit is set */

        if (!(RegisterBit & GpeRegisterInfo->EnableForRun))
        {
            return (AE_BAD_PARAMETER);
        }

        /*lint -fallthrough */

    case ACPI_GPE_ENABLE:
        ACPI_SET_BIT (EnableMask, RegisterBit);
        break;

    case ACPI_GPE_DISABLE:
        ACPI_CLEAR_BIT (EnableMask, RegisterBit);
        break;

    default:
        ACPI_ERROR ((AE_INFO, "Invalid GPE Action, %u\n", Action));
        return (AE_BAD_PARAMETER);
    }

    /* Write the updated enable mask */

    Status = AcpiHwWrite (EnableMask, &GpeRegisterInfo->EnableAddress);
    return (Status);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiHwClearGpe
 *
 * PARAMETERS:  GpeEventInfo        - Info block for the GPE to be cleared
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Clear the status bit for a single GPE.
 *
 ******************************************************************************/

ACPI_STATUS
AcpiHwClearGpe (
    ACPI_GPE_EVENT_INFO     *GpeEventInfo)
{
    ACPI_GPE_REGISTER_INFO  *GpeRegisterInfo;
    ACPI_STATUS             Status;
    UINT32                  RegisterBit;


    ACPI_FUNCTION_ENTRY ();

    /* Get the info block for the entire GPE register */

    GpeRegisterInfo = GpeEventInfo->RegisterInfo;
    if (!GpeRegisterInfo)
    {
        return (AE_NOT_EXIST);
    }

    /*
     * Write a one to the appropriate bit in the status register to
     * clear this GPE.
     */
    RegisterBit = AcpiHwGetGpeRegisterBit (GpeEventInfo, GpeRegisterInfo);

    Status = AcpiHwWrite (RegisterBit,
                    &GpeRegisterInfo->StatusAddress);

    return (Status);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiHwGetGpeStatus
 *
 * PARAMETERS:  GpeEventInfo        - Info block for the GPE to queried
 *              EventStatus         - Where the GPE status is returned
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Return the status of a single GPE.
 *
 ******************************************************************************/

ACPI_STATUS
AcpiHwGetGpeStatus (
    ACPI_GPE_EVENT_INFO     *GpeEventInfo,
    ACPI_EVENT_STATUS       *EventStatus)
{
    UINT32                  InByte;
    UINT32                  RegisterBit;
    ACPI_GPE_REGISTER_INFO  *GpeRegisterInfo;
    ACPI_EVENT_STATUS       LocalEventStatus = 0;
    ACPI_STATUS             Status;


    ACPI_FUNCTION_ENTRY ();


    if (!EventStatus)
    {
        return (AE_BAD_PARAMETER);
    }

    /* Get the info block for the entire GPE register */

    GpeRegisterInfo = GpeEventInfo->RegisterInfo;

    /* Get the register bitmask for this GPE */

    RegisterBit = AcpiHwGetGpeRegisterBit (GpeEventInfo, GpeRegisterInfo);

    /* GPE currently enabled? (enabled for runtime?) */

    if (RegisterBit & GpeRegisterInfo->EnableForRun)
    {
        LocalEventStatus |= ACPI_EVENT_FLAG_ENABLED;
    }

    /* GPE enabled for wake? */

    if (RegisterBit & GpeRegisterInfo->EnableForWake)
    {
        LocalEventStatus |= ACPI_EVENT_FLAG_WAKE_ENABLED;
    }

    /* GPE currently active (status bit == 1)? */

    Status = AcpiHwRead (&InByte, &GpeRegisterInfo->StatusAddress);
    if (ACPI_FAILURE (Status))
    {
        return (Status);
    }

    if (RegisterBit & InByte)
    {
        LocalEventStatus |= ACPI_EVENT_FLAG_SET;
    }

    /* Set return value */

    (*EventStatus) = LocalEventStatus;
    return (AE_OK);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiHwDisableGpeBlock
 *
 * PARAMETERS:  GpeXruptInfo        - GPE Interrupt info
 *              GpeBlock            - Gpe Block info
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Disable all GPEs within a single GPE block
 *
 ******************************************************************************/

ACPI_STATUS
AcpiHwDisableGpeBlock (
    ACPI_GPE_XRUPT_INFO     *GpeXruptInfo,
    ACPI_GPE_BLOCK_INFO     *GpeBlock,
    void                    *Context)
{
    UINT32                  i;
    ACPI_STATUS             Status;


    /* Examine each GPE Register within the block */

    for (i = 0; i < GpeBlock->RegisterCount; i++)
    {
        /* Disable all GPEs in this register */

        Status = AcpiHwWrite (0x00, &GpeBlock->RegisterInfo[i].EnableAddress);
        if (ACPI_FAILURE (Status))
        {
            return (Status);
        }
    }

    return (AE_OK);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiHwClearGpeBlock
 *
 * PARAMETERS:  GpeXruptInfo        - GPE Interrupt info
 *              GpeBlock            - Gpe Block info
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Clear status bits for all GPEs within a single GPE block
 *
 ******************************************************************************/

ACPI_STATUS
AcpiHwClearGpeBlock (
    ACPI_GPE_XRUPT_INFO     *GpeXruptInfo,
    ACPI_GPE_BLOCK_INFO     *GpeBlock,
    void                    *Context)
{
    UINT32                  i;
    ACPI_STATUS             Status;


    /* Examine each GPE Register within the block */

    for (i = 0; i < GpeBlock->RegisterCount; i++)
    {
        /* Clear status on all GPEs in this register */

        Status = AcpiHwWrite (0xFF, &GpeBlock->RegisterInfo[i].StatusAddress);
        if (ACPI_FAILURE (Status))
        {
            return (Status);
        }
    }

    return (AE_OK);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiHwEnableRuntimeGpeBlock
 *
 * PARAMETERS:  GpeXruptInfo        - GPE Interrupt info
 *              GpeBlock            - Gpe Block info
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Enable all "runtime" GPEs within a single GPE block. Includes
 *              combination wake/run GPEs.
 *
 ******************************************************************************/

ACPI_STATUS
AcpiHwEnableRuntimeGpeBlock (
    ACPI_GPE_XRUPT_INFO     *GpeXruptInfo,
    ACPI_GPE_BLOCK_INFO     *GpeBlock,
    void                    *Context)
{
    UINT32                  i;
    ACPI_STATUS             Status;


    /* NOTE: assumes that all GPEs are currently disabled */

    /* Examine each GPE Register within the block */

    for (i = 0; i < GpeBlock->RegisterCount; i++)
    {
        if (!GpeBlock->RegisterInfo[i].EnableForRun)
        {
            continue;
        }

        /* Enable all "runtime" GPEs in this register */

        Status = AcpiHwWrite (GpeBlock->RegisterInfo[i].EnableForRun,
                    &GpeBlock->RegisterInfo[i].EnableAddress);
        if (ACPI_FAILURE (Status))
        {
            return (Status);
        }
    }

    return (AE_OK);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiHwEnableWakeupGpeBlock
 *
 * PARAMETERS:  GpeXruptInfo        - GPE Interrupt info
 *              GpeBlock            - Gpe Block info
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Enable all "wake" GPEs within a single GPE block. Includes
 *              combination wake/run GPEs.
 *
 ******************************************************************************/

static ACPI_STATUS
AcpiHwEnableWakeupGpeBlock (
    ACPI_GPE_XRUPT_INFO     *GpeXruptInfo,
    ACPI_GPE_BLOCK_INFO     *GpeBlock,
    void                    *Context)
{
    UINT32                  i;
    ACPI_STATUS             Status;


    /* Examine each GPE Register within the block */

    for (i = 0; i < GpeBlock->RegisterCount; i++)
    {
        if (!GpeBlock->RegisterInfo[i].EnableForWake)
        {
            continue;
        }

        /* Enable all "wake" GPEs in this register */

        Status = AcpiHwWrite (GpeBlock->RegisterInfo[i].EnableForWake,
                    &GpeBlock->RegisterInfo[i].EnableAddress);
        if (ACPI_FAILURE (Status))
        {
            return (Status);
        }
    }

    return (AE_OK);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiHwDisableAllGpes
 *
 * PARAMETERS:  None
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Disable and clear all GPEs in all GPE blocks
 *
 ******************************************************************************/

ACPI_STATUS
AcpiHwDisableAllGpes (
    void)
{
    ACPI_STATUS             Status;


    ACPI_FUNCTION_TRACE (HwDisableAllGpes);


    Status = AcpiEvWalkGpeList (AcpiHwDisableGpeBlock, NULL);
    Status = AcpiEvWalkGpeList (AcpiHwClearGpeBlock, NULL);
    return_ACPI_STATUS (Status);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiHwEnableAllRuntimeGpes
 *
 * PARAMETERS:  None
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Enable all "runtime" GPEs, in all GPE blocks
 *
 ******************************************************************************/

ACPI_STATUS
AcpiHwEnableAllRuntimeGpes (
    void)
{
    ACPI_STATUS             Status;


    ACPI_FUNCTION_TRACE (HwEnableAllRuntimeGpes);


    Status = AcpiEvWalkGpeList (AcpiHwEnableRuntimeGpeBlock, NULL);
    return_ACPI_STATUS (Status);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiHwEnableAllWakeupGpes
 *
 * PARAMETERS:  None
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Enable all "wakeup" GPEs, in all GPE blocks
 *
 ******************************************************************************/

ACPI_STATUS
AcpiHwEnableAllWakeupGpes (
    void)
{
    ACPI_STATUS             Status;


    ACPI_FUNCTION_TRACE (HwEnableAllWakeupGpes);


    Status = AcpiEvWalkGpeList (AcpiHwEnableWakeupGpeBlock, NULL);
    return_ACPI_STATUS (Status);
}