os_specific/service_layers/osunixxf.c

/******************************************************************************
 *
 * Module Name: osunixxf - UNIX OSL interfaces
 *
 *****************************************************************************/

/*
 * Copyright (C) 2000 - 2011, Intel Corp.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */


/*
 * These interfaces are required in order to compile the ASL compiler and the
 * various ACPICA tools under Linux or other Unix-like system.
 *
 * Note: Use #define __APPLE__ for OS X generation.
 */
#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
#include <unistd.h>
#include <sys/time.h>
#include <semaphore.h>
#include <pthread.h>
#include <errno.h>

#include "acpi.h"
#include "accommon.h"
#include "amlcode.h"
#include "acparser.h"
#include "acdebug.h"

#define _COMPONENT          ACPI_OS_SERVICES
        ACPI_MODULE_NAME    ("osunixxf")


extern FILE                    *AcpiGbl_DebugFile;
FILE                           *AcpiGbl_OutputFile;


/* Upcalls to AcpiExec */

ACPI_PHYSICAL_ADDRESS
AeLocalGetRootPointer (
    void);

void
AeTableOverride (
    ACPI_TABLE_HEADER       *ExistingTable,
    ACPI_TABLE_HEADER       **NewTable);

typedef void* (*PTHREAD_CALLBACK) (void *);

/* Apple-specific */

#ifdef __APPLE__
#define sem_destroy         sem_close
#endif


/******************************************************************************
 *
 * FUNCTION:    AcpiOsInitialize, AcpiOsTerminate
 *
 * PARAMETERS:  None
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Init and terminate. Nothing to do.
 *
 *****************************************************************************/

ACPI_STATUS
AcpiOsInitialize (
    void)
{

    AcpiGbl_OutputFile = stdout;
    return (AE_OK);
}


ACPI_STATUS
AcpiOsTerminate (
    void)
{

    return (AE_OK);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsGetRootPointer
 *
 * PARAMETERS:  None
 *
 * RETURN:      RSDP physical address
 *
 * DESCRIPTION: Gets the ACPI root pointer (RSDP)
 *
 *****************************************************************************/

ACPI_PHYSICAL_ADDRESS
AcpiOsGetRootPointer (
    void)
{

    return (AeLocalGetRootPointer ());
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsPredefinedOverride
 *
 * PARAMETERS:  InitVal             - Initial value of the predefined object
 *              NewVal              - The new value for the object
 *
 * RETURN:      Status, pointer to value. Null pointer returned if not
 *              overriding.
 *
 * DESCRIPTION: Allow the OS to override predefined names
 *
 *****************************************************************************/

ACPI_STATUS
AcpiOsPredefinedOverride (
    const ACPI_PREDEFINED_NAMES *InitVal,
    ACPI_STRING                 *NewVal)
{

    if (!InitVal || !NewVal)
    {
        return (AE_BAD_PARAMETER);
    }

    *NewVal = NULL;
    return (AE_OK);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsTableOverride
 *
 * PARAMETERS:  ExistingTable       - Header of current table (probably
 *                                    firmware)
 *              NewTable            - Where an entire new table is returned.
 *
 * RETURN:      Status, pointer to new table. Null pointer returned if no
 *              table is available to override
 *
 * DESCRIPTION: Return a different version of a table if one is available
 *
 *****************************************************************************/

ACPI_STATUS
AcpiOsTableOverride (
    ACPI_TABLE_HEADER       *ExistingTable,
    ACPI_TABLE_HEADER       **NewTable)
{

    if (!ExistingTable || !NewTable)
    {
        return (AE_BAD_PARAMETER);
    }

    *NewTable = NULL;

#ifdef ACPI_EXEC_APP

    AeTableOverride (ExistingTable, NewTable);
    return (AE_OK);
#else

    return (AE_NO_ACPI_TABLES);
#endif
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsRedirectOutput
 *
 * PARAMETERS:  Destination         - An open file handle/pointer
 *
 * RETURN:      None
 *
 * DESCRIPTION: Causes redirect of AcpiOsPrintf and AcpiOsVprintf
 *
 *****************************************************************************/

void
AcpiOsRedirectOutput (
    void                    *Destination)
{

    AcpiGbl_OutputFile = Destination;
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsPrintf
 *
 * PARAMETERS:  fmt, ...            - Standard printf format
 *
 * RETURN:      None
 *
 * DESCRIPTION: Formatted output
 *
 *****************************************************************************/

void ACPI_INTERNAL_VAR_XFACE
AcpiOsPrintf (
    const char              *Fmt,
    ...)
{
    va_list                 Args;


    va_start (Args, Fmt);
    AcpiOsVprintf (Fmt, Args);
    va_end (Args);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsVprintf
 *
 * PARAMETERS:  fmt                 - Standard printf format
 *              args                - Argument list
 *
 * RETURN:      None
 *
 * DESCRIPTION: Formatted output with argument list pointer
 *
 *****************************************************************************/

void
AcpiOsVprintf (
    const char              *Fmt,
    va_list                 Args)
{
    INT32                   Count = 0;
    UINT8                   Flags;


    Flags = AcpiGbl_DbOutputFlags;
    if (Flags & ACPI_DB_REDIRECTABLE_OUTPUT)
    {
        /* Output is directable to either a file (if open) or the console */

        if (AcpiGbl_DebugFile)
        {
            /* Output file is open, send the output there */

            Count = vfprintf (AcpiGbl_DebugFile, Fmt, Args);
        }
        else
        {
            /* No redirection, send output to console (once only!) */

            Flags |= ACPI_DB_CONSOLE_OUTPUT;
        }
    }

    if (Flags & ACPI_DB_CONSOLE_OUTPUT)
    {
        Count = vfprintf (AcpiGbl_OutputFile, Fmt, Args);
    }
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsGetLine
 *
 * PARAMETERS:  fmt                 - Standard printf format
 *              args                - Argument list
 *
 * RETURN:      Actual bytes read
 *
 * DESCRIPTION: Formatted input with argument list pointer
 *
 *****************************************************************************/

UINT32
AcpiOsGetLine (
    char                    *Buffer)
{
    UINT8                   Temp;
    UINT32                  i;


    for (i = 0; ; i++)
    {
        scanf ("%1c", &Temp);
        if (!Temp || Temp == '\n')
        {
            break;
        }

        Buffer [i] = Temp;
    }

    /* Null terminate the buffer */

    Buffer [i] = 0;

    /* Return the number of bytes in the string */

    return (i);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsMapMemory
 *
 * PARAMETERS:  where               - Physical address of memory to be mapped
 *              length              - How much memory to map
 *
 * RETURN:      Pointer to mapped memory. Null on error.
 *
 * DESCRIPTION: Map physical memory into caller's address space
 *
 *****************************************************************************/

void *
AcpiOsMapMemory (
    ACPI_PHYSICAL_ADDRESS   where,
    ACPI_SIZE               length)
{

    return (ACPI_TO_POINTER ((ACPI_SIZE) where));
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsUnmapMemory
 *
 * PARAMETERS:  where               - Logical address of memory to be unmapped
 *              length              - How much memory to unmap
 *
 * RETURN:      None.
 *
 * DESCRIPTION: Delete a previously created mapping. Where and Length must
 *              correspond to a previous mapping exactly.
 *
 *****************************************************************************/

void
AcpiOsUnmapMemory (
    void                    *where,
    ACPI_SIZE               length)
{

    return;
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsAllocate
 *
 * PARAMETERS:  Size                - Amount to allocate, in bytes
 *
 * RETURN:      Pointer to the new allocation. Null on error.
 *
 * DESCRIPTION: Allocate memory. Algorithm is dependent on the OS.
 *
 *****************************************************************************/

void *
AcpiOsAllocate (
    ACPI_SIZE               size)
{
    void                    *Mem;


    Mem = (void *) malloc ((size_t) size);
    return (Mem);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsFree
 *
 * PARAMETERS:  mem                 - Pointer to previously allocated memory
 *
 * RETURN:      None.
 *
 * DESCRIPTION: Free memory allocated via AcpiOsAllocate
 *
 *****************************************************************************/

void
AcpiOsFree (
    void                    *mem)
{

    free (mem);
}


#ifdef ACPI_SINGLE_THREADED
/******************************************************************************
 *
 * FUNCTION:    Semaphore stub functions
 *
 * DESCRIPTION: Stub functions used for single-thread applications that do
 *              not require semaphore synchronization. Full implementations
 *              of these functions appear after the stubs.
 *
 *****************************************************************************/

ACPI_STATUS
AcpiOsCreateSemaphore (
    UINT32              MaxUnits,
    UINT32              InitialUnits,
    ACPI_HANDLE         *OutHandle)
{
    *OutHandle = (ACPI_HANDLE) 1;
    return (AE_OK);
}

ACPI_STATUS
AcpiOsDeleteSemaphore (
    ACPI_HANDLE         Handle)
{
    return (AE_OK);
}

ACPI_STATUS
AcpiOsWaitSemaphore (
    ACPI_HANDLE         Handle,
    UINT32              Units,
    UINT16              Timeout)
{
    return (AE_OK);
}

ACPI_STATUS
AcpiOsSignalSemaphore (
    ACPI_HANDLE         Handle,
    UINT32              Units)
{
    return (AE_OK);
}

#else
/******************************************************************************
 *
 * FUNCTION:    AcpiOsCreateSemaphore
 *
 * PARAMETERS:  InitialUnits        - Units to be assigned to the new semaphore
 *              OutHandle           - Where a handle will be returned
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Create an OS semaphore
 *
 *****************************************************************************/

ACPI_STATUS
AcpiOsCreateSemaphore (
    UINT32              MaxUnits,
    UINT32              InitialUnits,
    ACPI_HANDLE         *OutHandle)
{
    sem_t               *Sem;


    if (!OutHandle)
    {
        return (AE_BAD_PARAMETER);
    }

#ifdef __APPLE__
    {
        char            *SemaphoreName = tmpnam (NULL);

        Sem = sem_open (SemaphoreName, O_EXCL|O_CREAT, 0755, InitialUnits);
        if (!Sem)
        {
            return (AE_NO_MEMORY);
        }
        sem_unlink (SemaphoreName); /* This just deletes the name */
    }

#else
    Sem = AcpiOsAllocate (sizeof (sem_t));
    if (!Sem)
    {
        return (AE_NO_MEMORY);
    }

    if (sem_init (Sem, 0, InitialUnits) == -1)
    {
        AcpiOsFree (Sem);
        return (AE_BAD_PARAMETER);
    }
#endif

    *OutHandle = (ACPI_HANDLE) Sem;
    return (AE_OK);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsDeleteSemaphore
 *
 * PARAMETERS:  Handle              - Handle returned by AcpiOsCreateSemaphore
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Delete an OS semaphore
 *
 *****************************************************************************/

ACPI_STATUS
AcpiOsDeleteSemaphore (
    ACPI_HANDLE         Handle)
{
    sem_t               *Sem = (sem_t *) Handle;


    if (!Sem)
    {
        return (AE_BAD_PARAMETER);
    }

    if (sem_destroy (Sem) == -1)
    {
        return (AE_BAD_PARAMETER);
    }

    return (AE_OK);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsWaitSemaphore
 *
 * PARAMETERS:  Handle              - Handle returned by AcpiOsCreateSemaphore
 *              Units               - How many units to wait for
 *              Timeout             - How long to wait
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Wait for units
 *
 *****************************************************************************/

ACPI_STATUS
AcpiOsWaitSemaphore (
    ACPI_HANDLE         Handle,
    UINT32              Units,
    UINT16              Timeout)
{
    ACPI_STATUS         Status = AE_OK;
    sem_t               *Sem = (sem_t *) Handle;
    struct timespec     T;


    if (!Sem)
    {
        return (AE_BAD_PARAMETER);
    }

    switch (Timeout)
    {
    /*
     * No Wait:
     * --------
     * A zero timeout value indicates that we shouldn't wait - just
     * acquire the semaphore if available otherwise return AE_TIME
     * (a.k.a. 'would block').
     */
    case 0:

        if (sem_trywait(Sem) == -1)
        {
            Status = (AE_TIME);
        }
        break;

    /* Wait Indefinitely */

    case ACPI_WAIT_FOREVER:

        if (sem_wait (Sem))
        {
            Status = (AE_TIME);
        }
        break;

    /* Wait with Timeout */

    default:

        T.tv_sec = Timeout / 1000;
        T.tv_nsec = (Timeout - (T.tv_sec * 1000)) * 1000000;

#ifdef ACPI_USE_ALTERNATE_TIMEOUT
        /*
         * Alternate timeout mechanism for environments where
         * sem_timedwait is not available or does not work properly.
         */
        while (Timeout)
        {
            if (sem_trywait (Sem) == 0)
            {
                /* Got the semaphore */
                return (AE_OK);
            }
            usleep (1000);  /* one millisecond */
            Timeout--;
        }
        Status = (AE_TIME);
#else

        if (sem_timedwait (Sem, &T))
        {
            Status = (AE_TIME);
        }
#endif

        break;
    }

    return (Status);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsSignalSemaphore
 *
 * PARAMETERS:  Handle              - Handle returned by AcpiOsCreateSemaphore
 *              Units               - Number of units to send
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Send units
 *
 *****************************************************************************/

ACPI_STATUS
AcpiOsSignalSemaphore (
    ACPI_HANDLE         Handle,
    UINT32              Units)
{
    sem_t               *Sem = (sem_t *)Handle;


    if (!Sem)
    {
        return (AE_BAD_PARAMETER);
    }

    if (sem_post (Sem) == -1)
    {
        return (AE_LIMIT);
    }

    return (AE_OK);
}

#endif /* ACPI_SINGLE_THREADED */


/******************************************************************************
 *
 * FUNCTION:    Spinlock interfaces
 *
 * DESCRIPTION: Map these interfaces to semaphore interfaces
 *
 *****************************************************************************/

ACPI_STATUS
AcpiOsCreateLock (
    ACPI_SPINLOCK           *OutHandle)
{

    return (AcpiOsCreateSemaphore (1, 1, OutHandle));
}


void
AcpiOsDeleteLock (
    ACPI_SPINLOCK           Handle)
{
    AcpiOsDeleteSemaphore (Handle);
}


ACPI_CPU_FLAGS
AcpiOsAcquireLock (
    ACPI_HANDLE             Handle)
{
    AcpiOsWaitSemaphore (Handle, 1, 0xFFFF);
    return (0);
}


void
AcpiOsReleaseLock (
    ACPI_SPINLOCK           Handle,
    ACPI_CPU_FLAGS          Flags)
{
    AcpiOsSignalSemaphore (Handle, 1);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsInstallInterruptHandler
 *
 * PARAMETERS:  InterruptNumber     - Level handler should respond to.
 *              Isr                 - Address of the ACPI interrupt handler
 *              ExceptPtr           - Where status is returned
 *
 * RETURN:      Handle to the newly installed handler.
 *
 * DESCRIPTION: Install an interrupt handler. Used to install the ACPI
 *              OS-independent handler.
 *
 *****************************************************************************/

UINT32
AcpiOsInstallInterruptHandler (
    UINT32                  InterruptNumber,
    ACPI_OSD_HANDLER        ServiceRoutine,
    void                    *Context)
{

    return (AE_OK);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsRemoveInterruptHandler
 *
 * PARAMETERS:  Handle              - Returned when handler was installed
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Uninstalls an interrupt handler.
 *
 *****************************************************************************/

ACPI_STATUS
AcpiOsRemoveInterruptHandler (
    UINT32                  InterruptNumber,
    ACPI_OSD_HANDLER        ServiceRoutine)
{

    return (AE_OK);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsExecute
 *
 * PARAMETERS:  Type                - Type of execution
 *              Function            - Address of the function to execute
 *              Context             - Passed as a parameter to the function
 *
 * RETURN:      Status.
 *
 * DESCRIPTION: Execute a new thread
 *
 *****************************************************************************/

ACPI_STATUS
AcpiOsExecute (
    ACPI_EXECUTE_TYPE       Type,
    ACPI_OSD_EXEC_CALLBACK  Function,
    void                    *Context)
{
    pthread_t               thread;
    int                     ret;


    ret = pthread_create (&thread, NULL, (PTHREAD_CALLBACK) Function, Context);
    if (ret)
    {
        AcpiOsPrintf("Create thread failed");
    }
    return (0);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsStall
 *
 * PARAMETERS:  microseconds        - Time to sleep
 *
 * RETURN:      Blocks until sleep is completed.
 *
 * DESCRIPTION: Sleep at microsecond granularity
 *
 *****************************************************************************/

void
AcpiOsStall (
    UINT32                  microseconds)
{

    if (microseconds)
    {
        usleep (microseconds);
    }
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsSleep
 *
 * PARAMETERS:  milliseconds        - Time to sleep
 *
 * RETURN:      Blocks until sleep is completed.
 *
 * DESCRIPTION: Sleep at millisecond granularity
 *
 *****************************************************************************/

void
AcpiOsSleep (
    UINT64                  milliseconds)
{

    sleep (milliseconds / 1000);    /* Sleep for whole seconds */

    /*
     * Arg to usleep() must be less than 1,000,000 (1 second)
     */
    usleep ((milliseconds % 1000) * 1000);      /* Sleep for remaining usecs */
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsGetTimer
 *
 * PARAMETERS:  None
 *
 * RETURN:      Current time in 100 nanosecond units
 *
 * DESCRIPTION: Get the current system time
 *
 *****************************************************************************/

UINT64
AcpiOsGetTimer (
    void)
{
    struct timeval          time;


    gettimeofday (&time, NULL);

    /* Seconds * 10^7 = 100ns(10^-7), Microseconds(10^-6) * 10^1 = 100ns */

    return (((UINT64) time.tv_sec * 10000000) + ((UINT64) time.tv_usec * 10));
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsReadPciConfiguration
 *
 * PARAMETERS:  PciId               - Seg/Bus/Dev
 *              Register            - Device Register
 *              Value               - Buffer where value is placed
 *              Width               - Number of bits
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Read data from PCI configuration space
 *
 *****************************************************************************/

ACPI_STATUS
AcpiOsReadPciConfiguration (
    ACPI_PCI_ID             *PciId,
    UINT32                  Register,
    UINT64                  *Value,
    UINT32                  Width)
{

    return (AE_OK);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsWritePciConfiguration
 *
 * PARAMETERS:  PciId               - Seg/Bus/Dev
 *              Register            - Device Register
 *              Value               - Value to be written
 *              Width               - Number of bits
 *
 * RETURN:      Status.
 *
 * DESCRIPTION: Write data to PCI configuration space
 *
 *****************************************************************************/

ACPI_STATUS
AcpiOsWritePciConfiguration (
    ACPI_PCI_ID             *PciId,
    UINT32                  Register,
    UINT64                  Value,
    UINT32                  Width)
{

    return (AE_OK);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsReadPort
 *
 * PARAMETERS:  Address             - Address of I/O port/register to read
 *              Value               - Where value is placed
 *              Width               - Number of bits
 *
 * RETURN:      Value read from port
 *
 * DESCRIPTION: Read data from an I/O port or register
 *
 *****************************************************************************/

ACPI_STATUS
AcpiOsReadPort (
    ACPI_IO_ADDRESS         Address,
    UINT32                  *Value,
    UINT32                  Width)
{

    switch (Width)
    {
    case 8:
        *Value = 0xFF;
        break;

    case 16:
        *Value = 0xFFFF;
        break;

    case 32:
        *Value = 0xFFFFFFFF;
        break;

    default:
        return (AE_BAD_PARAMETER);
    }

    return (AE_OK);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsWritePort
 *
 * PARAMETERS:  Address             - Address of I/O port/register to write
 *              Value               - Value to write
 *              Width               - Number of bits
 *
 * RETURN:      None
 *
 * DESCRIPTION: Write data to an I/O port or register
 *
 *****************************************************************************/

ACPI_STATUS
AcpiOsWritePort (
    ACPI_IO_ADDRESS         Address,
    UINT32                  Value,
    UINT32                  Width)
{

    return (AE_OK);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsReadMemory
 *
 * PARAMETERS:  Address             - Physical Memory Address to read
 *              Value               - Where value is placed
 *              Width               - Number of bits
 *
 * RETURN:      Value read from physical memory address
 *
 * DESCRIPTION: Read data from a physical memory address
 *
 *****************************************************************************/

ACPI_STATUS
AcpiOsReadMemory (
    ACPI_PHYSICAL_ADDRESS   Address,
    UINT32                  *Value,
    UINT32                  Width)
{

    switch (Width)
    {
    case 8:
    case 16:
    case 32:
        *Value = 0;
        break;

    default:
        return (AE_BAD_PARAMETER);
    }
    return (AE_OK);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsWriteMemory
 *
 * PARAMETERS:  Address             - Physical Memory Address to write
 *              Value               - Value to write
 *              Width               - Number of bits
 *
 * RETURN:      None
 *
 * DESCRIPTION: Write data to a physical memory address
 *
 *****************************************************************************/

ACPI_STATUS
AcpiOsWriteMemory (
    ACPI_PHYSICAL_ADDRESS   Address,
    UINT32                  Value,
    UINT32                  Width)
{

    return (AE_OK);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsReadable
 *
 * PARAMETERS:  Pointer             - Area to be verified
 *              Length              - Size of area
 *
 * RETURN:      TRUE if readable for entire length
 *
 * DESCRIPTION: Verify that a pointer is valid for reading
 *
 *****************************************************************************/

BOOLEAN
AcpiOsReadable (
    void                    *Pointer,
    ACPI_SIZE               Length)
{

    return (TRUE);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsWritable
 *
 * PARAMETERS:  Pointer             - Area to be verified
 *              Length              - Size of area
 *
 * RETURN:      TRUE if writable for entire length
 *
 * DESCRIPTION: Verify that a pointer is valid for writing
 *
 *****************************************************************************/

BOOLEAN
AcpiOsWritable (
    void                    *Pointer,
    ACPI_SIZE               Length)
{

    return (TRUE);
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsGetThreadId
 *
 * PARAMETERS:  None
 *
 * RETURN:      Id of the running thread
 *
 * DESCRIPTION: Get the ID of the current (running) thread
 *
 *****************************************************************************/

ACPI_THREAD_ID
AcpiOsGetThreadId (
    void)
{

    return (ACPI_CAST_PTHREAD_T (pthread_self()));
}


/******************************************************************************
 *
 * FUNCTION:    AcpiOsSignal
 *
 * PARAMETERS:  Function            - ACPI CA signal function code
 *              Info                - Pointer to function-dependent structure
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Miscellaneous functions. Example implementation only.
 *
 *****************************************************************************/

ACPI_STATUS
AcpiOsSignal (
    UINT32                  Function,
    void                    *Info)
{

    switch (Function)
    {
    case ACPI_SIGNAL_FATAL:
        break;

    case ACPI_SIGNAL_BREAKPOINT:
        break;

    default:
        break;
    }

    return (AE_OK);
}