Home | History | Annotate | Line # | Download | only in parser
psutils.c revision 1.1.1.4.2.2
      1 /******************************************************************************
      2  *
      3  * Module Name: psutils - Parser miscellaneous utilities (Parser only)
      4  *
      5  *****************************************************************************/
      6 
      7 /*
      8  * Copyright (C) 2000 - 2015, Intel Corp.
      9  * All rights reserved.
     10  *
     11  * Redistribution and use in source and binary forms, with or without
     12  * modification, are permitted provided that the following conditions
     13  * are met:
     14  * 1. Redistributions of source code must retain the above copyright
     15  *    notice, this list of conditions, and the following disclaimer,
     16  *    without modification.
     17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
     18  *    substantially similar to the "NO WARRANTY" disclaimer below
     19  *    ("Disclaimer") and any redistribution must be conditioned upon
     20  *    including a substantially similar Disclaimer requirement for further
     21  *    binary redistribution.
     22  * 3. Neither the names of the above-listed copyright holders nor the names
     23  *    of any contributors may be used to endorse or promote products derived
     24  *    from this software without specific prior written permission.
     25  *
     26  * Alternatively, this software may be distributed under the terms of the
     27  * GNU General Public License ("GPL") version 2 as published by the Free
     28  * Software Foundation.
     29  *
     30  * NO WARRANTY
     31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
     34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
     35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
     39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
     40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     41  * POSSIBILITY OF SUCH DAMAGES.
     42  */
     43 
     44 #include "acpi.h"
     45 #include "accommon.h"
     46 #include "acparser.h"
     47 #include "amlcode.h"
     48 
     49 #define _COMPONENT          ACPI_PARSER
     50         ACPI_MODULE_NAME    ("psutils")
     51 
     52 
     53 /*******************************************************************************
     54  *
     55  * FUNCTION:    AcpiPsCreateScopeOp
     56  *
     57  * PARAMETERS:  None
     58  *
     59  * RETURN:      A new Scope object, null on failure
     60  *
     61  * DESCRIPTION: Create a Scope and associated namepath op with the root name
     62  *
     63  ******************************************************************************/
     64 
     65 ACPI_PARSE_OBJECT *
     66 AcpiPsCreateScopeOp (
     67     UINT8                   *Aml)
     68 {
     69     ACPI_PARSE_OBJECT       *ScopeOp;
     70 
     71 
     72     ScopeOp = AcpiPsAllocOp (AML_SCOPE_OP, Aml);
     73     if (!ScopeOp)
     74     {
     75         return (NULL);
     76     }
     77 
     78     ScopeOp->Named.Name = ACPI_ROOT_NAME;
     79     return (ScopeOp);
     80 }
     81 
     82 
     83 /*******************************************************************************
     84  *
     85  * FUNCTION:    AcpiPsInitOp
     86  *
     87  * PARAMETERS:  Op              - A newly allocated Op object
     88  *              Opcode          - Opcode to store in the Op
     89  *
     90  * RETURN:      None
     91  *
     92  * DESCRIPTION: Initialize a parse (Op) object
     93  *
     94  ******************************************************************************/
     95 
     96 void
     97 AcpiPsInitOp (
     98     ACPI_PARSE_OBJECT       *Op,
     99     UINT16                  Opcode)
    100 {
    101     ACPI_FUNCTION_ENTRY ();
    102 
    103 
    104     Op->Common.DescriptorType = ACPI_DESC_TYPE_PARSER;
    105     Op->Common.AmlOpcode = Opcode;
    106 
    107     ACPI_DISASM_ONLY_MEMBERS (strncpy (Op->Common.AmlOpName,
    108             (AcpiPsGetOpcodeInfo (Opcode))->Name,
    109                 sizeof (Op->Common.AmlOpName)));
    110 }
    111 
    112 
    113 /*******************************************************************************
    114  *
    115  * FUNCTION:    AcpiPsAllocOp
    116  *
    117  * PARAMETERS:  Opcode          - Opcode that will be stored in the new Op
    118  *              Aml             - Address of the opcode
    119  *
    120  * RETURN:      Pointer to the new Op, null on failure
    121  *
    122  * DESCRIPTION: Allocate an acpi_op, choose op type (and thus size) based on
    123  *              opcode. A cache of opcodes is available for the pure
    124  *              GENERIC_OP, since this is by far the most commonly used.
    125  *
    126  ******************************************************************************/
    127 
    128 ACPI_PARSE_OBJECT*
    129 AcpiPsAllocOp (
    130     UINT16                  Opcode,
    131     UINT8                   *Aml)
    132 {
    133     ACPI_PARSE_OBJECT       *Op;
    134     const ACPI_OPCODE_INFO  *OpInfo;
    135     UINT8                   Flags = ACPI_PARSEOP_GENERIC;
    136 
    137 
    138     ACPI_FUNCTION_ENTRY ();
    139 
    140 
    141     OpInfo = AcpiPsGetOpcodeInfo (Opcode);
    142 
    143     /* Determine type of ParseOp required */
    144 
    145     if (OpInfo->Flags & AML_DEFER)
    146     {
    147         Flags = ACPI_PARSEOP_DEFERRED;
    148     }
    149     else if (OpInfo->Flags & AML_NAMED)
    150     {
    151         Flags = ACPI_PARSEOP_NAMED;
    152     }
    153     else if (Opcode == AML_INT_BYTELIST_OP)
    154     {
    155         Flags = ACPI_PARSEOP_BYTELIST;
    156     }
    157 
    158     /* Allocate the minimum required size object */
    159 
    160     if (Flags == ACPI_PARSEOP_GENERIC)
    161     {
    162         /* The generic op (default) is by far the most common (16 to 1) */
    163 
    164         Op = AcpiOsAcquireObject (AcpiGbl_PsNodeCache);
    165     }
    166     else
    167     {
    168         /* Extended parseop */
    169 
    170         Op = AcpiOsAcquireObject (AcpiGbl_PsNodeExtCache);
    171     }
    172 
    173     /* Initialize the Op */
    174 
    175     if (Op)
    176     {
    177         AcpiPsInitOp (Op, Opcode);
    178         Op->Common.Aml = Aml;
    179         Op->Common.Flags = Flags;
    180     }
    181 
    182     return (Op);
    183 }
    184 
    185 
    186 /*******************************************************************************
    187  *
    188  * FUNCTION:    AcpiPsFreeOp
    189  *
    190  * PARAMETERS:  Op              - Op to be freed
    191  *
    192  * RETURN:      None.
    193  *
    194  * DESCRIPTION: Free an Op object. Either put it on the GENERIC_OP cache list
    195  *              or actually free it.
    196  *
    197  ******************************************************************************/
    198 
    199 void
    200 AcpiPsFreeOp (
    201     ACPI_PARSE_OBJECT       *Op)
    202 {
    203     ACPI_FUNCTION_NAME (PsFreeOp);
    204 
    205 
    206     if (Op->Common.AmlOpcode == AML_INT_RETURN_VALUE_OP)
    207     {
    208         ACPI_DEBUG_PRINT ((ACPI_DB_ALLOCATIONS, "Free retval op: %p\n", Op));
    209     }
    210 
    211     if (Op->Common.Flags & ACPI_PARSEOP_GENERIC)
    212     {
    213         (void) AcpiOsReleaseObject (AcpiGbl_PsNodeCache, Op);
    214     }
    215     else
    216     {
    217         (void) AcpiOsReleaseObject (AcpiGbl_PsNodeExtCache, Op);
    218     }
    219 }
    220 
    221 
    222 /*******************************************************************************
    223  *
    224  * FUNCTION:    Utility functions
    225  *
    226  * DESCRIPTION: Low level character and object functions
    227  *
    228  ******************************************************************************/
    229 
    230 
    231 /*
    232  * Is "c" a namestring lead character?
    233  */
    234 BOOLEAN
    235 AcpiPsIsLeadingChar (
    236     UINT32                  c)
    237 {
    238     return ((BOOLEAN) (c == '_' || (c >= 'A' && c <= 'Z')));
    239 }
    240 
    241 
    242 /*
    243  * Get op's name (4-byte name segment) or 0 if unnamed
    244  */
    245 UINT32
    246 AcpiPsGetName (
    247     ACPI_PARSE_OBJECT       *Op)
    248 {
    249 
    250     /* The "generic" object has no name associated with it */
    251 
    252     if (Op->Common.Flags & ACPI_PARSEOP_GENERIC)
    253     {
    254         return (0);
    255     }
    256 
    257     /* Only the "Extended" parse objects have a name */
    258 
    259     return (Op->Named.Name);
    260 }
    261 
    262 
    263 /*
    264  * Set op's name
    265  */
    266 void
    267 AcpiPsSetName (
    268     ACPI_PARSE_OBJECT       *Op,
    269     UINT32                  name)
    270 {
    271 
    272     /* The "generic" object has no name associated with it */
    273 
    274     if (Op->Common.Flags & ACPI_PARSEOP_GENERIC)
    275     {
    276         return;
    277     }
    278 
    279     Op->Named.Name = name;
    280 }
    281