Home | History | Annotate | Line # | Download | only in tables
tbxfload.c revision 1.3
      1 /******************************************************************************
      2  *
      3  * Module Name: tbxfload - Table load/unload external interfaces
      4  *
      5  *****************************************************************************/
      6 
      7 /*
      8  * Copyright (C) 2000 - 2016, Intel Corp.
      9  * All rights reserved.
     10  *
     11  * Redistribution and use in source and binary forms, with or without
     12  * modification, are permitted provided that the following conditions
     13  * are met:
     14  * 1. Redistributions of source code must retain the above copyright
     15  *    notice, this list of conditions, and the following disclaimer,
     16  *    without modification.
     17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
     18  *    substantially similar to the "NO WARRANTY" disclaimer below
     19  *    ("Disclaimer") and any redistribution must be conditioned upon
     20  *    including a substantially similar Disclaimer requirement for further
     21  *    binary redistribution.
     22  * 3. Neither the names of the above-listed copyright holders nor the names
     23  *    of any contributors may be used to endorse or promote products derived
     24  *    from this software without specific prior written permission.
     25  *
     26  * Alternatively, this software may be distributed under the terms of the
     27  * GNU General Public License ("GPL") version 2 as published by the Free
     28  * Software Foundation.
     29  *
     30  * NO WARRANTY
     31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
     34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
     35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
     39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
     40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     41  * POSSIBILITY OF SUCH DAMAGES.
     42  */
     43 
     44 #define EXPORT_ACPI_INTERFACES
     45 
     46 #include "acpi.h"
     47 #include "accommon.h"
     48 #include "acnamesp.h"
     49 #include "actables.h"
     50 #include "acevents.h"
     51 
     52 #define _COMPONENT          ACPI_TABLES
     53         ACPI_MODULE_NAME    ("tbxfload")
     54 
     55 
     56 /*******************************************************************************
     57  *
     58  * FUNCTION:    AcpiLoadTables
     59  *
     60  * PARAMETERS:  None
     61  *
     62  * RETURN:      Status
     63  *
     64  * DESCRIPTION: Load the ACPI tables from the RSDT/XSDT
     65  *
     66  ******************************************************************************/
     67 
     68 ACPI_STATUS
     69 AcpiLoadTables (
     70     void)
     71 {
     72     ACPI_STATUS             Status;
     73 
     74 
     75     ACPI_FUNCTION_TRACE (AcpiLoadTables);
     76 
     77 
     78     /*
     79      * Install the default operation region handlers. These are the
     80      * handlers that are defined by the ACPI specification to be
     81      * "always accessible" -- namely, SystemMemory, SystemIO, and
     82      * PCI_Config. This also means that no _REG methods need to be
     83      * run for these address spaces. We need to have these handlers
     84      * installed before any AML code can be executed, especially any
     85      * module-level code (11/2015).
     86      * Note that we allow OSPMs to install their own region handlers
     87      * between AcpiInitializeSubsystem() and AcpiLoadTables() to use
     88      * their customized default region handlers.
     89      */
     90     Status = AcpiEvInstallRegionHandlers ();
     91     if (ACPI_FAILURE (Status))
     92     {
     93         ACPI_EXCEPTION ((AE_INFO, Status, "During Region initialization"));
     94         return_ACPI_STATUS (Status);
     95     }
     96 
     97     /* Load the namespace from the tables */
     98 
     99     Status = AcpiTbLoadNamespace ();
    100 
    101     /* Don't let single failures abort the load */
    102 
    103     if (Status == AE_CTRL_TERMINATE)
    104     {
    105         Status = AE_OK;
    106     }
    107 
    108     if (ACPI_FAILURE (Status))
    109     {
    110         ACPI_EXCEPTION ((AE_INFO, Status,
    111             "While loading namespace from ACPI tables"));
    112     }
    113 
    114     if (!AcpiGbl_GroupModuleLevelCode)
    115     {
    116         /*
    117          * Initialize the objects that remain uninitialized. This
    118          * runs the executable AML that may be part of the
    119          * declaration of these objects:
    120          * OperationRegions, BufferFields, Buffers, and Packages.
    121          */
    122         Status = AcpiNsInitializeObjects ();
    123         if (ACPI_FAILURE (Status))
    124         {
    125             return_ACPI_STATUS (Status);
    126         }
    127     }
    128 
    129     AcpiGbl_NamespaceInitialized = TRUE;
    130     return_ACPI_STATUS (Status);
    131 }
    132 
    133 ACPI_EXPORT_SYMBOL_INIT (AcpiLoadTables)
    134 
    135 
    136 /*******************************************************************************
    137  *
    138  * FUNCTION:    AcpiTbLoadNamespace
    139  *
    140  * PARAMETERS:  None
    141  *
    142  * RETURN:      Status
    143  *
    144  * DESCRIPTION: Load the namespace from the DSDT and all SSDTs/PSDTs found in
    145  *              the RSDT/XSDT.
    146  *
    147  ******************************************************************************/
    148 
    149 ACPI_STATUS
    150 AcpiTbLoadNamespace (
    151     void)
    152 {
    153     ACPI_STATUS             Status;
    154     UINT32                  i;
    155     ACPI_TABLE_HEADER       *NewDsdt;
    156     ACPI_TABLE_DESC         *Table;
    157     UINT32                  TablesLoaded = 0;
    158     UINT32                  TablesFailed = 0;
    159 
    160 
    161     ACPI_FUNCTION_TRACE (TbLoadNamespace);
    162 
    163 
    164     (void) AcpiUtAcquireMutex (ACPI_MTX_TABLES);
    165 
    166     /*
    167      * Load the namespace. The DSDT is required, but any SSDT and
    168      * PSDT tables are optional. Verify the DSDT.
    169      */
    170     Table = &AcpiGbl_RootTableList.Tables[AcpiGbl_DsdtIndex];
    171 
    172     if (!AcpiGbl_RootTableList.CurrentTableCount ||
    173         !ACPI_COMPARE_NAME (Table->Signature.Ascii, ACPI_SIG_DSDT) ||
    174          ACPI_FAILURE (AcpiTbValidateTable (Table)))
    175     {
    176         Status = AE_NO_ACPI_TABLES;
    177         goto UnlockAndExit;
    178     }
    179 
    180     /*
    181      * Save the DSDT pointer for simple access. This is the mapped memory
    182      * address. We must take care here because the address of the .Tables
    183      * array can change dynamically as tables are loaded at run-time. Note:
    184      * .Pointer field is not validated until after call to AcpiTbValidateTable.
    185      */
    186     AcpiGbl_DSDT = Table->Pointer;
    187 
    188     /*
    189      * Optionally copy the entire DSDT to local memory (instead of simply
    190      * mapping it.) There are some BIOSs that corrupt or replace the original
    191      * DSDT, creating the need for this option. Default is FALSE, do not copy
    192      * the DSDT.
    193      */
    194     if (AcpiGbl_CopyDsdtLocally)
    195     {
    196         NewDsdt = AcpiTbCopyDsdt (AcpiGbl_DsdtIndex);
    197         if (NewDsdt)
    198         {
    199             AcpiGbl_DSDT = NewDsdt;
    200         }
    201     }
    202 
    203     /*
    204      * Save the original DSDT header for detection of table corruption
    205      * and/or replacement of the DSDT from outside the OS.
    206      */
    207     memcpy (&AcpiGbl_OriginalDsdtHeader, AcpiGbl_DSDT,
    208         sizeof (ACPI_TABLE_HEADER));
    209 
    210     (void) AcpiUtReleaseMutex (ACPI_MTX_TABLES);
    211 
    212     /* Load and parse tables */
    213 
    214     Status = AcpiNsLoadTable (AcpiGbl_DsdtIndex, AcpiGbl_RootNode);
    215     if (ACPI_FAILURE (Status))
    216     {
    217         ACPI_EXCEPTION ((AE_INFO, Status, "[DSDT] table load failed"));
    218         TablesFailed++;
    219     }
    220     else
    221     {
    222         TablesLoaded++;
    223     }
    224 
    225     /* Load any SSDT or PSDT tables. Note: Loop leaves tables locked */
    226 
    227     (void) AcpiUtAcquireMutex (ACPI_MTX_TABLES);
    228     for (i = 0; i < AcpiGbl_RootTableList.CurrentTableCount; ++i)
    229     {
    230         Table = &AcpiGbl_RootTableList.Tables[i];
    231 
    232         if (!AcpiGbl_RootTableList.Tables[i].Address ||
    233             (!ACPI_COMPARE_NAME (Table->Signature.Ascii, ACPI_SIG_SSDT) &&
    234              !ACPI_COMPARE_NAME (Table->Signature.Ascii, ACPI_SIG_PSDT) &&
    235              !ACPI_COMPARE_NAME (Table->Signature.Ascii, ACPI_SIG_OSDT)) ||
    236              ACPI_FAILURE (AcpiTbValidateTable (Table)))
    237         {
    238             continue;
    239         }
    240 
    241         /* Ignore errors while loading tables, get as many as possible */
    242 
    243         (void) AcpiUtReleaseMutex (ACPI_MTX_TABLES);
    244         Status =  AcpiNsLoadTable (i, AcpiGbl_RootNode);
    245         if (ACPI_FAILURE (Status))
    246         {
    247             ACPI_EXCEPTION ((AE_INFO, Status, "(%4.4s:%8.8s) while loading table",
    248                 Table->Signature.Ascii, Table->Pointer->OemTableId));
    249 
    250             TablesFailed++;
    251 
    252             ACPI_DEBUG_PRINT_RAW ((ACPI_DB_INIT,
    253                 "Table [%4.4s:%8.8s] (id FF) - Table namespace load failed\n\n",
    254                 Table->Signature.Ascii, Table->Pointer->OemTableId));
    255         }
    256         else
    257         {
    258             TablesLoaded++;
    259         }
    260 
    261         (void) AcpiUtAcquireMutex (ACPI_MTX_TABLES);
    262     }
    263 
    264     if (!TablesFailed)
    265     {
    266         ACPI_INFO ((
    267             "%u ACPI AML tables successfully acquired and loaded\n",
    268             TablesLoaded));
    269     }
    270     else
    271     {
    272         ACPI_ERROR ((AE_INFO,
    273             "%u table load failures, %u successful",
    274             TablesFailed, TablesLoaded));
    275 
    276         /* Indicate at least one failure */
    277 
    278         Status = AE_CTRL_TERMINATE;
    279     }
    280 
    281 UnlockAndExit:
    282     (void) AcpiUtReleaseMutex (ACPI_MTX_TABLES);
    283     return_ACPI_STATUS (Status);
    284 }
    285 
    286 
    287 /*******************************************************************************
    288  *
    289  * FUNCTION:    AcpiInstallTable
    290  *
    291  * PARAMETERS:  Address             - Address of the ACPI table to be installed.
    292  *              Physical            - Whether the address is a physical table
    293  *                                    address or not
    294  *
    295  * RETURN:      Status
    296  *
    297  * DESCRIPTION: Dynamically install an ACPI table.
    298  *              Note: This function should only be invoked after
    299  *                    AcpiInitializeTables() and before AcpiLoadTables().
    300  *
    301  ******************************************************************************/
    302 
    303 ACPI_STATUS
    304 AcpiInstallTable (
    305     ACPI_PHYSICAL_ADDRESS   Address,
    306     BOOLEAN                 Physical)
    307 {
    308     ACPI_STATUS             Status;
    309     UINT8                   Flags;
    310     UINT32                  TableIndex;
    311 
    312 
    313     ACPI_FUNCTION_TRACE (AcpiInstallTable);
    314 
    315 
    316     if (Physical)
    317     {
    318         Flags = ACPI_TABLE_ORIGIN_INTERNAL_PHYSICAL;
    319     }
    320     else
    321     {
    322         Flags = ACPI_TABLE_ORIGIN_EXTERNAL_VIRTUAL;
    323     }
    324 
    325     Status = AcpiTbInstallStandardTable (Address, Flags,
    326         FALSE, FALSE, &TableIndex);
    327 
    328     return_ACPI_STATUS (Status);
    329 }
    330 
    331 ACPI_EXPORT_SYMBOL_INIT (AcpiInstallTable)
    332 
    333 
    334 /*******************************************************************************
    335  *
    336  * FUNCTION:    AcpiLoadTable
    337  *
    338  * PARAMETERS:  Table               - Pointer to a buffer containing the ACPI
    339  *                                    table to be loaded.
    340  *
    341  * RETURN:      Status
    342  *
    343  * DESCRIPTION: Dynamically load an ACPI table from the caller's buffer. Must
    344  *              be a valid ACPI table with a valid ACPI table header.
    345  *              Note1: Mainly intended to support hotplug addition of SSDTs.
    346  *              Note2: Does not copy the incoming table. User is responsible
    347  *              to ensure that the table is not deleted or unmapped.
    348  *
    349  ******************************************************************************/
    350 
    351 ACPI_STATUS
    352 AcpiLoadTable (
    353     ACPI_TABLE_HEADER       *Table)
    354 {
    355     ACPI_STATUS             Status;
    356     UINT32                  TableIndex;
    357 
    358 
    359     ACPI_FUNCTION_TRACE (AcpiLoadTable);
    360 
    361 
    362     /* Parameter validation */
    363 
    364     if (!Table)
    365     {
    366         return_ACPI_STATUS (AE_BAD_PARAMETER);
    367     }
    368 
    369     /* Must acquire the interpreter lock during this operation */
    370 
    371     Status = AcpiUtAcquireMutex (ACPI_MTX_INTERPRETER);
    372     if (ACPI_FAILURE (Status))
    373     {
    374         return_ACPI_STATUS (Status);
    375     }
    376 
    377     /* Install the table and load it into the namespace */
    378 
    379     ACPI_INFO (("Host-directed Dynamic ACPI Table Load:"));
    380     (void) AcpiUtAcquireMutex (ACPI_MTX_TABLES);
    381 
    382     Status = AcpiTbInstallStandardTable (ACPI_PTR_TO_PHYSADDR (Table),
    383         ACPI_TABLE_ORIGIN_EXTERNAL_VIRTUAL, TRUE, FALSE,
    384         &TableIndex);
    385 
    386     (void) AcpiUtReleaseMutex (ACPI_MTX_TABLES);
    387     if (ACPI_FAILURE (Status))
    388     {
    389         goto UnlockAndExit;
    390     }
    391 
    392     /*
    393      * Note: Now table is "INSTALLED", it must be validated before
    394      * using.
    395      */
    396     Status = AcpiTbValidateTable (
    397         &AcpiGbl_RootTableList.Tables[TableIndex]);
    398     if (ACPI_FAILURE (Status))
    399     {
    400         goto UnlockAndExit;
    401     }
    402 
    403     Status = AcpiNsLoadTable (TableIndex, AcpiGbl_RootNode);
    404 
    405     /* Invoke table handler if present */
    406 
    407     if (AcpiGbl_TableHandler)
    408     {
    409         (void) AcpiGbl_TableHandler (ACPI_TABLE_EVENT_LOAD, Table,
    410             AcpiGbl_TableHandlerContext);
    411     }
    412 
    413 UnlockAndExit:
    414     (void) AcpiUtReleaseMutex (ACPI_MTX_INTERPRETER);
    415     return_ACPI_STATUS (Status);
    416 }
    417 
    418 ACPI_EXPORT_SYMBOL (AcpiLoadTable)
    419 
    420 
    421 /*******************************************************************************
    422  *
    423  * FUNCTION:    AcpiUnloadParentTable
    424  *
    425  * PARAMETERS:  Object              - Handle to any namespace object owned by
    426  *                                    the table to be unloaded
    427  *
    428  * RETURN:      Status
    429  *
    430  * DESCRIPTION: Via any namespace object within an SSDT or OEMx table, unloads
    431  *              the table and deletes all namespace objects associated with
    432  *              that table. Unloading of the DSDT is not allowed.
    433  *              Note: Mainly intended to support hotplug removal of SSDTs.
    434  *
    435  ******************************************************************************/
    436 
    437 ACPI_STATUS
    438 AcpiUnloadParentTable (
    439     ACPI_HANDLE             Object)
    440 {
    441     ACPI_NAMESPACE_NODE     *Node = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, Object);
    442     ACPI_STATUS             Status = AE_NOT_EXIST;
    443     ACPI_OWNER_ID           OwnerId;
    444     UINT32                  i;
    445 
    446 
    447     ACPI_FUNCTION_TRACE (AcpiUnloadParentTable);
    448 
    449 
    450     /* Parameter validation */
    451 
    452     if (!Object)
    453     {
    454         return_ACPI_STATUS (AE_BAD_PARAMETER);
    455     }
    456 
    457     /*
    458      * The node OwnerId is currently the same as the parent table ID.
    459      * However, this could change in the future.
    460      */
    461     OwnerId = Node->OwnerId;
    462     if (!OwnerId)
    463     {
    464         /* OwnerId==0 means DSDT is the owner. DSDT cannot be unloaded */
    465 
    466         return_ACPI_STATUS (AE_TYPE);
    467     }
    468 
    469     /* Must acquire the interpreter lock during this operation */
    470 
    471     Status = AcpiUtAcquireMutex (ACPI_MTX_INTERPRETER);
    472     if (ACPI_FAILURE (Status))
    473     {
    474         return_ACPI_STATUS (Status);
    475     }
    476 
    477     /* Find the table in the global table list */
    478 
    479     for (i = 0; i < AcpiGbl_RootTableList.CurrentTableCount; i++)
    480     {
    481         if (OwnerId != AcpiGbl_RootTableList.Tables[i].OwnerId)
    482         {
    483             continue;
    484         }
    485 
    486         /*
    487          * Allow unload of SSDT and OEMx tables only. Do not allow unload
    488          * of the DSDT. No other types of tables should get here, since
    489          * only these types can contain AML and thus are the only types
    490          * that can create namespace objects.
    491          */
    492         if (ACPI_COMPARE_NAME (
    493                 AcpiGbl_RootTableList.Tables[i].Signature.Ascii,
    494                 ACPI_SIG_DSDT))
    495         {
    496             Status = AE_TYPE;
    497             break;
    498         }
    499 
    500         /* Ensure the table is actually loaded */
    501 
    502         if (!AcpiTbIsTableLoaded (i))
    503         {
    504             Status = AE_NOT_EXIST;
    505             break;
    506         }
    507 
    508         /* Invoke table handler if present */
    509 
    510         if (AcpiGbl_TableHandler)
    511         {
    512             (void) AcpiGbl_TableHandler (ACPI_TABLE_EVENT_UNLOAD,
    513                 AcpiGbl_RootTableList.Tables[i].Pointer,
    514                 AcpiGbl_TableHandlerContext);
    515         }
    516 
    517         /*
    518          * Delete all namespace objects owned by this table. Note that
    519          * these objects can appear anywhere in the namespace by virtue
    520          * of the AML "Scope" operator. Thus, we need to track ownership
    521          * by an ID, not simply a position within the hierarchy.
    522          */
    523         Status = AcpiTbDeleteNamespaceByOwner (i);
    524         if (ACPI_FAILURE (Status))
    525         {
    526             break;
    527         }
    528 
    529         Status = AcpiTbReleaseOwnerId (i);
    530         AcpiTbSetTableLoadedFlag (i, FALSE);
    531         break;
    532     }
    533 
    534     (void) AcpiUtReleaseMutex (ACPI_MTX_INTERPRETER);
    535     return_ACPI_STATUS (Status);
    536 }
    537 
    538 ACPI_EXPORT_SYMBOL (AcpiUnloadParentTable)
    539