Home | History | Annotate | Line # | Download | only in tables
tbxfload.c revision 1.4
      1 /******************************************************************************
      2  *
      3  * Module Name: tbxfload - Table load/unload external interfaces
      4  *
      5  *****************************************************************************/
      6 
      7 /*
      8  * Copyright (C) 2000 - 2016, Intel Corp.
      9  * All rights reserved.
     10  *
     11  * Redistribution and use in source and binary forms, with or without
     12  * modification, are permitted provided that the following conditions
     13  * are met:
     14  * 1. Redistributions of source code must retain the above copyright
     15  *    notice, this list of conditions, and the following disclaimer,
     16  *    without modification.
     17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
     18  *    substantially similar to the "NO WARRANTY" disclaimer below
     19  *    ("Disclaimer") and any redistribution must be conditioned upon
     20  *    including a substantially similar Disclaimer requirement for further
     21  *    binary redistribution.
     22  * 3. Neither the names of the above-listed copyright holders nor the names
     23  *    of any contributors may be used to endorse or promote products derived
     24  *    from this software without specific prior written permission.
     25  *
     26  * Alternatively, this software may be distributed under the terms of the
     27  * GNU General Public License ("GPL") version 2 as published by the Free
     28  * Software Foundation.
     29  *
     30  * NO WARRANTY
     31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
     34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
     35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
     39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
     40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     41  * POSSIBILITY OF SUCH DAMAGES.
     42  */
     43 
     44 #define EXPORT_ACPI_INTERFACES
     45 
     46 #include "acpi.h"
     47 #include "accommon.h"
     48 #include "acnamesp.h"
     49 #include "actables.h"
     50 #include "acevents.h"
     51 
     52 #define _COMPONENT          ACPI_TABLES
     53         ACPI_MODULE_NAME    ("tbxfload")
     54 
     55 
     56 /*******************************************************************************
     57  *
     58  * FUNCTION:    AcpiLoadTables
     59  *
     60  * PARAMETERS:  None
     61  *
     62  * RETURN:      Status
     63  *
     64  * DESCRIPTION: Load the ACPI tables from the RSDT/XSDT
     65  *
     66  ******************************************************************************/
     67 
     68 ACPI_STATUS ACPI_INIT_FUNCTION
     69 AcpiLoadTables (
     70     void)
     71 {
     72     ACPI_STATUS             Status;
     73 
     74 
     75     ACPI_FUNCTION_TRACE (AcpiLoadTables);
     76 
     77 
     78     /*
     79      * Install the default operation region handlers. These are the
     80      * handlers that are defined by the ACPI specification to be
     81      * "always accessible" -- namely, SystemMemory, SystemIO, and
     82      * PCI_Config. This also means that no _REG methods need to be
     83      * run for these address spaces. We need to have these handlers
     84      * installed before any AML code can be executed, especially any
     85      * module-level code (11/2015).
     86      * Note that we allow OSPMs to install their own region handlers
     87      * between AcpiInitializeSubsystem() and AcpiLoadTables() to use
     88      * their customized default region handlers.
     89      */
     90     Status = AcpiEvInstallRegionHandlers ();
     91     if (ACPI_FAILURE (Status))
     92     {
     93         ACPI_EXCEPTION ((AE_INFO, Status, "During Region initialization"));
     94         return_ACPI_STATUS (Status);
     95     }
     96 
     97     /* Load the namespace from the tables */
     98 
     99     Status = AcpiTbLoadNamespace ();
    100 
    101     /* Don't let single failures abort the load */
    102 
    103     if (Status == AE_CTRL_TERMINATE)
    104     {
    105         Status = AE_OK;
    106     }
    107 
    108     if (ACPI_FAILURE (Status))
    109     {
    110         ACPI_EXCEPTION ((AE_INFO, Status,
    111             "While loading namespace from ACPI tables"));
    112     }
    113 
    114     if (AcpiGbl_ParseTableAsTermList || !AcpiGbl_GroupModuleLevelCode)
    115     {
    116         /*
    117          * Initialize the objects that remain uninitialized. This
    118          * runs the executable AML that may be part of the
    119          * declaration of these objects:
    120          * OperationRegions, BufferFields, Buffers, and Packages.
    121          */
    122         Status = AcpiNsInitializeObjects ();
    123         if (ACPI_FAILURE (Status))
    124         {
    125             return_ACPI_STATUS (Status);
    126         }
    127     }
    128 
    129     AcpiGbl_NamespaceInitialized = TRUE;
    130     return_ACPI_STATUS (Status);
    131 }
    132 
    133 ACPI_EXPORT_SYMBOL_INIT (AcpiLoadTables)
    134 
    135 
    136 /*******************************************************************************
    137  *
    138  * FUNCTION:    AcpiTbLoadNamespace
    139  *
    140  * PARAMETERS:  None
    141  *
    142  * RETURN:      Status
    143  *
    144  * DESCRIPTION: Load the namespace from the DSDT and all SSDTs/PSDTs found in
    145  *              the RSDT/XSDT.
    146  *
    147  ******************************************************************************/
    148 
    149 ACPI_STATUS
    150 AcpiTbLoadNamespace (
    151     void)
    152 {
    153     ACPI_STATUS             Status;
    154     UINT32                  i;
    155     ACPI_TABLE_HEADER       *NewDsdt;
    156     ACPI_TABLE_DESC         *Table;
    157     UINT32                  TablesLoaded = 0;
    158     UINT32                  TablesFailed = 0;
    159 
    160 
    161     ACPI_FUNCTION_TRACE (TbLoadNamespace);
    162 
    163 
    164     (void) AcpiUtAcquireMutex (ACPI_MTX_TABLES);
    165 
    166     /*
    167      * Load the namespace. The DSDT is required, but any SSDT and
    168      * PSDT tables are optional. Verify the DSDT.
    169      */
    170     Table = &AcpiGbl_RootTableList.Tables[AcpiGbl_DsdtIndex];
    171 
    172     if (!AcpiGbl_RootTableList.CurrentTableCount ||
    173         !ACPI_COMPARE_NAME (Table->Signature.Ascii, ACPI_SIG_DSDT) ||
    174          ACPI_FAILURE (AcpiTbValidateTable (Table)))
    175     {
    176         Status = AE_NO_ACPI_TABLES;
    177         goto UnlockAndExit;
    178     }
    179 
    180     /*
    181      * Save the DSDT pointer for simple access. This is the mapped memory
    182      * address. We must take care here because the address of the .Tables
    183      * array can change dynamically as tables are loaded at run-time. Note:
    184      * .Pointer field is not validated until after call to AcpiTbValidateTable.
    185      */
    186     AcpiGbl_DSDT = Table->Pointer;
    187 
    188     /*
    189      * Optionally copy the entire DSDT to local memory (instead of simply
    190      * mapping it.) There are some BIOSs that corrupt or replace the original
    191      * DSDT, creating the need for this option. Default is FALSE, do not copy
    192      * the DSDT.
    193      */
    194     if (AcpiGbl_CopyDsdtLocally)
    195     {
    196         NewDsdt = AcpiTbCopyDsdt (AcpiGbl_DsdtIndex);
    197         if (NewDsdt)
    198         {
    199             AcpiGbl_DSDT = NewDsdt;
    200         }
    201     }
    202 
    203     /*
    204      * Save the original DSDT header for detection of table corruption
    205      * and/or replacement of the DSDT from outside the OS.
    206      */
    207     memcpy (&AcpiGbl_OriginalDsdtHeader, AcpiGbl_DSDT,
    208         sizeof (ACPI_TABLE_HEADER));
    209 
    210     /* Load and parse tables */
    211 
    212     (void) AcpiUtReleaseMutex (ACPI_MTX_TABLES);
    213     Status = AcpiNsLoadTable (AcpiGbl_DsdtIndex, AcpiGbl_RootNode);
    214     (void) AcpiUtAcquireMutex (ACPI_MTX_TABLES);
    215     if (ACPI_FAILURE (Status))
    216     {
    217         ACPI_EXCEPTION ((AE_INFO, Status, "[DSDT] table load failed"));
    218         TablesFailed++;
    219     }
    220     else
    221     {
    222         TablesLoaded++;
    223     }
    224 
    225     /* Load any SSDT or PSDT tables. Note: Loop leaves tables locked */
    226 
    227     for (i = 0; i < AcpiGbl_RootTableList.CurrentTableCount; ++i)
    228     {
    229         Table = &AcpiGbl_RootTableList.Tables[i];
    230 
    231         if (!AcpiGbl_RootTableList.Tables[i].Address ||
    232             (!ACPI_COMPARE_NAME (Table->Signature.Ascii, ACPI_SIG_SSDT) &&
    233              !ACPI_COMPARE_NAME (Table->Signature.Ascii, ACPI_SIG_PSDT) &&
    234              !ACPI_COMPARE_NAME (Table->Signature.Ascii, ACPI_SIG_OSDT)) ||
    235              ACPI_FAILURE (AcpiTbValidateTable (Table)))
    236         {
    237             continue;
    238         }
    239 
    240         /* Ignore errors while loading tables, get as many as possible */
    241 
    242         (void) AcpiUtReleaseMutex (ACPI_MTX_TABLES);
    243         Status =  AcpiNsLoadTable (i, AcpiGbl_RootNode);
    244         (void) AcpiUtAcquireMutex (ACPI_MTX_TABLES);
    245         if (ACPI_FAILURE (Status))
    246         {
    247             ACPI_EXCEPTION ((AE_INFO, Status, "(%4.4s:%8.8s) while loading table",
    248                 Table->Signature.Ascii, Table->Pointer->OemTableId));
    249 
    250             TablesFailed++;
    251 
    252             ACPI_DEBUG_PRINT_RAW ((ACPI_DB_INIT,
    253                 "Table [%4.4s:%8.8s] (id FF) - Table namespace load failed\n\n",
    254                 Table->Signature.Ascii, Table->Pointer->OemTableId));
    255         }
    256         else
    257         {
    258             TablesLoaded++;
    259         }
    260     }
    261 
    262     if (!TablesFailed)
    263     {
    264         ACPI_INFO ((
    265             "%u ACPI AML tables successfully acquired and loaded",
    266             TablesLoaded));
    267     }
    268     else
    269     {
    270         ACPI_ERROR ((AE_INFO,
    271             "%u table load failures, %u successful",
    272             TablesFailed, TablesLoaded));
    273 
    274         /* Indicate at least one failure */
    275 
    276         Status = AE_CTRL_TERMINATE;
    277     }
    278 
    279 #ifdef ACPI_APPLICATION
    280     ACPI_DEBUG_PRINT_RAW ((ACPI_DB_INIT, "\n"));
    281 #endif
    282 
    283 
    284 UnlockAndExit:
    285     (void) AcpiUtReleaseMutex (ACPI_MTX_TABLES);
    286     return_ACPI_STATUS (Status);
    287 }
    288 
    289 
    290 /*******************************************************************************
    291  *
    292  * FUNCTION:    AcpiInstallTable
    293  *
    294  * PARAMETERS:  Address             - Address of the ACPI table to be installed.
    295  *              Physical            - Whether the address is a physical table
    296  *                                    address or not
    297  *
    298  * RETURN:      Status
    299  *
    300  * DESCRIPTION: Dynamically install an ACPI table.
    301  *              Note: This function should only be invoked after
    302  *                    AcpiInitializeTables() and before AcpiLoadTables().
    303  *
    304  ******************************************************************************/
    305 
    306 ACPI_STATUS ACPI_INIT_FUNCTION
    307 AcpiInstallTable (
    308     ACPI_PHYSICAL_ADDRESS   Address,
    309     BOOLEAN                 Physical)
    310 {
    311     ACPI_STATUS             Status;
    312     UINT8                   Flags;
    313     UINT32                  TableIndex;
    314 
    315 
    316     ACPI_FUNCTION_TRACE (AcpiInstallTable);
    317 
    318 
    319     if (Physical)
    320     {
    321         Flags = ACPI_TABLE_ORIGIN_INTERNAL_PHYSICAL;
    322     }
    323     else
    324     {
    325         Flags = ACPI_TABLE_ORIGIN_EXTERNAL_VIRTUAL;
    326     }
    327 
    328     Status = AcpiTbInstallStandardTable (Address, Flags,
    329         FALSE, FALSE, &TableIndex);
    330 
    331     return_ACPI_STATUS (Status);
    332 }
    333 
    334 ACPI_EXPORT_SYMBOL_INIT (AcpiInstallTable)
    335 
    336 
    337 /*******************************************************************************
    338  *
    339  * FUNCTION:    AcpiLoadTable
    340  *
    341  * PARAMETERS:  Table               - Pointer to a buffer containing the ACPI
    342  *                                    table to be loaded.
    343  *
    344  * RETURN:      Status
    345  *
    346  * DESCRIPTION: Dynamically load an ACPI table from the caller's buffer. Must
    347  *              be a valid ACPI table with a valid ACPI table header.
    348  *              Note1: Mainly intended to support hotplug addition of SSDTs.
    349  *              Note2: Does not copy the incoming table. User is responsible
    350  *              to ensure that the table is not deleted or unmapped.
    351  *
    352  ******************************************************************************/
    353 
    354 ACPI_STATUS
    355 AcpiLoadTable (
    356     ACPI_TABLE_HEADER       *Table)
    357 {
    358     ACPI_STATUS             Status;
    359     UINT32                  TableIndex;
    360 
    361 
    362     ACPI_FUNCTION_TRACE (AcpiLoadTable);
    363 
    364 
    365     /* Parameter validation */
    366 
    367     if (!Table)
    368     {
    369         return_ACPI_STATUS (AE_BAD_PARAMETER);
    370     }
    371 
    372     /* Install the table and load it into the namespace */
    373 
    374     ACPI_INFO (("Host-directed Dynamic ACPI Table Load:"));
    375     Status = AcpiTbInstallAndLoadTable (Table, ACPI_PTR_TO_PHYSADDR (Table),
    376         ACPI_TABLE_ORIGIN_EXTERNAL_VIRTUAL, FALSE, &TableIndex);
    377     return_ACPI_STATUS (Status);
    378 }
    379 
    380 ACPI_EXPORT_SYMBOL (AcpiLoadTable)
    381 
    382 
    383 /*******************************************************************************
    384  *
    385  * FUNCTION:    AcpiUnloadParentTable
    386  *
    387  * PARAMETERS:  Object              - Handle to any namespace object owned by
    388  *                                    the table to be unloaded
    389  *
    390  * RETURN:      Status
    391  *
    392  * DESCRIPTION: Via any namespace object within an SSDT or OEMx table, unloads
    393  *              the table and deletes all namespace objects associated with
    394  *              that table. Unloading of the DSDT is not allowed.
    395  *              Note: Mainly intended to support hotplug removal of SSDTs.
    396  *
    397  ******************************************************************************/
    398 
    399 ACPI_STATUS
    400 AcpiUnloadParentTable (
    401     ACPI_HANDLE             Object)
    402 {
    403     ACPI_NAMESPACE_NODE     *Node = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, Object);
    404     ACPI_STATUS             Status = AE_NOT_EXIST;
    405     ACPI_OWNER_ID           OwnerId;
    406     UINT32                  i;
    407 
    408 
    409     ACPI_FUNCTION_TRACE (AcpiUnloadParentTable);
    410 
    411 
    412     /* Parameter validation */
    413 
    414     if (!Object)
    415     {
    416         return_ACPI_STATUS (AE_BAD_PARAMETER);
    417     }
    418 
    419     /*
    420      * The node OwnerId is currently the same as the parent table ID.
    421      * However, this could change in the future.
    422      */
    423     OwnerId = Node->OwnerId;
    424     if (!OwnerId)
    425     {
    426         /* OwnerId==0 means DSDT is the owner. DSDT cannot be unloaded */
    427 
    428         return_ACPI_STATUS (AE_TYPE);
    429     }
    430 
    431     /* Must acquire the table lock during this operation */
    432 
    433     Status = AcpiUtAcquireMutex (ACPI_MTX_TABLES);
    434     if (ACPI_FAILURE (Status))
    435     {
    436         return_ACPI_STATUS (Status);
    437     }
    438 
    439     /* Find the table in the global table list */
    440 
    441     for (i = 0; i < AcpiGbl_RootTableList.CurrentTableCount; i++)
    442     {
    443         if (OwnerId != AcpiGbl_RootTableList.Tables[i].OwnerId)
    444         {
    445             continue;
    446         }
    447 
    448         /*
    449          * Allow unload of SSDT and OEMx tables only. Do not allow unload
    450          * of the DSDT. No other types of tables should get here, since
    451          * only these types can contain AML and thus are the only types
    452          * that can create namespace objects.
    453          */
    454         if (ACPI_COMPARE_NAME (
    455                 AcpiGbl_RootTableList.Tables[i].Signature.Ascii,
    456                 ACPI_SIG_DSDT))
    457         {
    458             Status = AE_TYPE;
    459             break;
    460         }
    461 
    462         /* Ensure the table is actually loaded */
    463 
    464         (void) AcpiUtReleaseMutex (ACPI_MTX_TABLES);
    465         if (!AcpiTbIsTableLoaded (i))
    466         {
    467             Status = AE_NOT_EXIST;
    468             (void) AcpiUtAcquireMutex (ACPI_MTX_TABLES);
    469             break;
    470         }
    471 
    472         /* Invoke table handler if present */
    473 
    474         if (AcpiGbl_TableHandler)
    475         {
    476             (void) AcpiGbl_TableHandler (ACPI_TABLE_EVENT_UNLOAD,
    477                 AcpiGbl_RootTableList.Tables[i].Pointer,
    478                 AcpiGbl_TableHandlerContext);
    479         }
    480 
    481         /*
    482          * Delete all namespace objects owned by this table. Note that
    483          * these objects can appear anywhere in the namespace by virtue
    484          * of the AML "Scope" operator. Thus, we need to track ownership
    485          * by an ID, not simply a position within the hierarchy.
    486          */
    487         Status = AcpiTbDeleteNamespaceByOwner (i);
    488         if (ACPI_FAILURE (Status))
    489         {
    490             break;
    491         }
    492 
    493         Status = AcpiTbReleaseOwnerId (i);
    494         AcpiTbSetTableLoadedFlag (i, FALSE);
    495         (void) AcpiUtAcquireMutex (ACPI_MTX_TABLES);
    496         break;
    497     }
    498 
    499     (void) AcpiUtReleaseMutex (ACPI_MTX_TABLES);
    500     return_ACPI_STATUS (Status);
    501 }
    502 
    503 ACPI_EXPORT_SYMBOL (AcpiUnloadParentTable)
    504