asfile.c revision 1.1.1.9 1 /******************************************************************************
2 *
3 * Module Name: asfile - Main module for the acpi source processor utility
4 *
5 *****************************************************************************/
6
7 /*
8 * Copyright (C) 2000 - 2016, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44 #include "acpisrc.h"
45 #include "acapps.h"
46
47 /* Local prototypes */
48
49 void
50 AsDoWildcard (
51 ACPI_CONVERSION_TABLE *ConversionTable,
52 char *SourcePath,
53 char *TargetPath,
54 int MaxPathLength,
55 int FileType,
56 char *WildcardSpec);
57
58 BOOLEAN
59 AsDetectLoneLineFeeds (
60 char *Filename,
61 char *Buffer);
62
63 static ACPI_INLINE int
64 AsMaxInt (int a, int b)
65 {
66 return (a > b ? a : b);
67 }
68
69
70 /******************************************************************************
71 *
72 * FUNCTION: AsDoWildcard
73 *
74 * DESCRIPTION: Process files via wildcards
75 *
76 ******************************************************************************/
77
78 void
79 AsDoWildcard (
80 ACPI_CONVERSION_TABLE *ConversionTable,
81 char *SourcePath,
82 char *TargetPath,
83 int MaxPathLength,
84 int FileType,
85 char *WildcardSpec)
86 {
87 void *DirInfo;
88 char *Filename;
89 char *SourceDirPath;
90 char *TargetDirPath;
91 char RequestedFileType;
92
93
94 if (FileType == FILE_TYPE_DIRECTORY)
95 {
96 RequestedFileType = REQUEST_DIR_ONLY;
97 }
98 else
99 {
100 RequestedFileType = REQUEST_FILE_ONLY;
101 }
102
103 VERBOSE_PRINT (("Checking for %s source files in directory \"%s\"\n",
104 WildcardSpec, SourcePath));
105
106 /* Open the directory for wildcard search */
107
108 DirInfo = AcpiOsOpenDirectory (SourcePath, WildcardSpec, RequestedFileType);
109 if (DirInfo)
110 {
111 /*
112 * Get all of the files that match both the
113 * wildcard and the requested file type
114 */
115 while ((Filename = AcpiOsGetNextFilename (DirInfo)))
116 {
117 /* Looking for directory files, must check file type */
118
119 switch (RequestedFileType)
120 {
121 case REQUEST_DIR_ONLY:
122
123 /* If we actually have a dir, process the subtree */
124
125 if (!AsCheckForDirectory (SourcePath, TargetPath, Filename,
126 &SourceDirPath, &TargetDirPath))
127 {
128 VERBOSE_PRINT (("Subdirectory: %s\n", Filename));
129
130 AsProcessTree (ConversionTable, SourceDirPath, TargetDirPath);
131 free (SourceDirPath);
132 free (TargetDirPath);
133 }
134 break;
135
136 case REQUEST_FILE_ONLY:
137
138 /* Otherwise, this is a file, not a directory */
139
140 VERBOSE_PRINT (("File: %s\n", Filename));
141
142 AsProcessOneFile (ConversionTable, SourcePath, TargetPath,
143 MaxPathLength, Filename, FileType);
144 break;
145
146 default:
147
148 break;
149 }
150 }
151
152 /* Cleanup */
153
154 AcpiOsCloseDirectory (DirInfo);
155 }
156 }
157
158
159 /******************************************************************************
160 *
161 * FUNCTION: AsProcessTree
162 *
163 * DESCRIPTION: Process the directory tree. Files with the extension ".C" and
164 * ".H" are processed as the tree is traversed.
165 *
166 ******************************************************************************/
167
168 ACPI_NATIVE_INT
169 AsProcessTree (
170 ACPI_CONVERSION_TABLE *ConversionTable,
171 char *SourcePath,
172 char *TargetPath)
173 {
174 int MaxPathLength;
175
176
177 MaxPathLength = AsMaxInt (strlen (SourcePath), strlen (TargetPath));
178
179 if (!(ConversionTable->Flags & FLG_NO_FILE_OUTPUT))
180 {
181 if (ConversionTable->Flags & FLG_LOWERCASE_DIRNAMES)
182 {
183 AcpiUtStrlwr (TargetPath);
184 }
185
186 VERBOSE_PRINT (("Creating Directory \"%s\"\n", TargetPath));
187 if (mkdir (TargetPath))
188 {
189 if (errno != EEXIST)
190 {
191 printf ("Could not create target directory\n");
192 return (-1);
193 }
194 }
195 }
196
197 /* Do the C source files */
198
199 AsDoWildcard (ConversionTable, SourcePath, TargetPath, MaxPathLength,
200 FILE_TYPE_SOURCE, "*.c");
201
202 /* Do the C header files */
203
204 AsDoWildcard (ConversionTable, SourcePath, TargetPath, MaxPathLength,
205 FILE_TYPE_HEADER, "*.h");
206
207 /* Do the Lex file(s) */
208
209 AsDoWildcard (ConversionTable, SourcePath, TargetPath, MaxPathLength,
210 FILE_TYPE_SOURCE, "*.l");
211
212 /* Do the yacc file(s) */
213
214 AsDoWildcard (ConversionTable, SourcePath, TargetPath, MaxPathLength,
215 FILE_TYPE_SOURCE, "*.y");
216
217 /* Do any ASL files */
218
219 AsDoWildcard (ConversionTable, SourcePath, TargetPath, MaxPathLength,
220 FILE_TYPE_HEADER, "*.asl");
221
222 /* Do any subdirectories */
223
224 AsDoWildcard (ConversionTable, SourcePath, TargetPath, MaxPathLength,
225 FILE_TYPE_DIRECTORY, "*");
226
227 return (0);
228 }
229
230
231 /******************************************************************************
232 *
233 * FUNCTION: AsDetectLoneLineFeeds
234 *
235 * DESCRIPTION: Find LF without CR.
236 *
237 ******************************************************************************/
238
239 BOOLEAN
240 AsDetectLoneLineFeeds (
241 char *Filename,
242 char *Buffer)
243 {
244 UINT32 i = 1;
245 UINT32 LfCount = 0;
246 UINT32 LineCount = 0;
247
248
249 if (!Buffer[0])
250 {
251 return (FALSE);
252 }
253
254 while (Buffer[i])
255 {
256 if (Buffer[i] == 0x0A)
257 {
258 if (Buffer[i-1] != 0x0D)
259 {
260 LfCount++;
261 }
262
263 LineCount++;
264 }
265 i++;
266 }
267
268 if (LfCount)
269 {
270 if (LineCount == LfCount)
271 {
272 if (!Gbl_IgnoreLoneLineFeeds)
273 {
274 printf ("%s: ****File has UNIX format**** (LF only, not CR/LF) %u lines\n",
275 Filename, LfCount);
276 }
277 }
278 else
279 {
280 printf ("%s: %u lone linefeeds in file\n", Filename, LfCount);
281 }
282
283 return (TRUE);
284 }
285
286 return (FALSE);
287 }
288
289
290 /******************************************************************************
291 *
292 * FUNCTION: AsConvertFile
293 *
294 * DESCRIPTION: Perform the requested transforms on the file buffer (as
295 * determined by the ConversionTable and the FileType).
296 *
297 ******************************************************************************/
298
299 void
300 AsConvertFile (
301 ACPI_CONVERSION_TABLE *ConversionTable,
302 char *FileBuffer,
303 char *Filename,
304 ACPI_NATIVE_INT FileType)
305 {
306 UINT32 i;
307 UINT32 Functions;
308 ACPI_STRING_TABLE *StringTable;
309 ACPI_IDENTIFIER_TABLE *ConditionalTable;
310 ACPI_IDENTIFIER_TABLE *LineTable;
311 ACPI_TYPED_IDENTIFIER_TABLE *StructTable;
312 ACPI_IDENTIFIER_TABLE *SpecialMacroTable;
313
314
315 switch (FileType)
316 {
317 case FILE_TYPE_SOURCE:
318
319 Functions = ConversionTable->SourceFunctions;
320 StringTable = ConversionTable->SourceStringTable;
321 LineTable = ConversionTable->SourceLineTable;
322 ConditionalTable = ConversionTable->SourceConditionalTable;
323 StructTable = ConversionTable->SourceStructTable;
324 SpecialMacroTable = ConversionTable->SourceSpecialMacroTable;
325 break;
326
327 case FILE_TYPE_HEADER:
328
329 Functions = ConversionTable->HeaderFunctions;
330 StringTable = ConversionTable->HeaderStringTable;
331 LineTable = ConversionTable->HeaderLineTable;
332 ConditionalTable = ConversionTable->HeaderConditionalTable;
333 StructTable = ConversionTable->HeaderStructTable;
334 SpecialMacroTable = ConversionTable->HeaderSpecialMacroTable;
335 break;
336
337 case FILE_TYPE_PATCH:
338
339 Functions = ConversionTable->PatchFunctions;
340 StringTable = ConversionTable->PatchStringTable;
341 LineTable = ConversionTable->PatchLineTable;
342 ConditionalTable = ConversionTable->PatchConditionalTable;
343 StructTable = ConversionTable->PatchStructTable;
344 SpecialMacroTable = ConversionTable->PatchSpecialMacroTable;
345 break;
346
347 default:
348
349 printf ("Unknown file type, cannot process\n");
350 return;
351 }
352
353
354 Gbl_StructDefs = strstr (FileBuffer, "/* acpisrc:StructDefs");
355 Gbl_Files++;
356 VERBOSE_PRINT (("Processing %u bytes\n",
357 (unsigned int) strlen (FileBuffer)));
358
359 if (Gbl_Cleanup)
360 {
361 AsRemoveExtraLines (FileBuffer, Filename);
362 AsRemoveSpacesAfterPeriod (FileBuffer, Filename);
363 }
364
365 if (ConversionTable->LowerCaseTable)
366 {
367 for (i = 0; ConversionTable->LowerCaseTable[i].Identifier; i++)
368 {
369 AsLowerCaseString (ConversionTable->LowerCaseTable[i].Identifier,
370 FileBuffer);
371 }
372 }
373
374 /* Process all the string replacements */
375
376 if (StringTable)
377 {
378 for (i = 0; StringTable[i].Target; i++)
379 {
380 AsReplaceString (StringTable[i].Target, StringTable[i].Replacement,
381 StringTable[i].Type, FileBuffer);
382 }
383 }
384
385 if (LineTable)
386 {
387 for (i = 0; LineTable[i].Identifier; i++)
388 {
389 AsRemoveLine (FileBuffer, LineTable[i].Identifier);
390 }
391 }
392
393 if (ConditionalTable)
394 {
395 for (i = 0; ConditionalTable[i].Identifier; i++)
396 {
397 AsRemoveConditionalCompile (FileBuffer, ConditionalTable[i].Identifier);
398 }
399 }
400
401 #ifdef _OBSOLETE_FUNCTIONS
402 if (MacroTable)
403 {
404 for (i = 0; MacroTable[i].Identifier; i++)
405 {
406 AsRemoveMacro (FileBuffer, MacroTable[i].Identifier);
407 }
408 }
409 #endif
410
411 if (StructTable)
412 {
413 for (i = 0; StructTable[i].Identifier; i++)
414 {
415 AsInsertPrefix (FileBuffer, StructTable[i].Identifier,
416 StructTable[i].Type);
417 }
418 }
419
420 if (SpecialMacroTable)
421 {
422 for (i = 0; SpecialMacroTable[i].Identifier; i++)
423 {
424 AsCleanupSpecialMacro (FileBuffer, SpecialMacroTable[i].Identifier);
425 }
426 }
427
428 /* Process the function table */
429
430 for (i = 0; i < 32; i++)
431 {
432 /* Decode the function bitmap */
433
434 switch ((1 << i) & Functions)
435 {
436 case 0:
437
438 /* This function not configured */
439 break;
440
441 case CVT_COUNT_TABS:
442
443 AsCountTabs (FileBuffer, Filename);
444 break;
445
446 case CVT_COUNT_NON_ANSI_COMMENTS:
447
448 AsCountNonAnsiComments (FileBuffer, Filename);
449 break;
450
451 case CVT_CHECK_BRACES:
452
453 AsCheckForBraces (FileBuffer, Filename);
454 break;
455
456 case CVT_TRIM_LINES:
457
458 AsTrimLines (FileBuffer, Filename);
459 break;
460
461 case CVT_COUNT_LINES:
462
463 AsCountSourceLines (FileBuffer, Filename);
464 break;
465
466 case CVT_BRACES_ON_SAME_LINE:
467
468 AsBracesOnSameLine (FileBuffer);
469 break;
470
471 case CVT_MIXED_CASE_TO_UNDERSCORES:
472
473 AsMixedCaseToUnderscores (FileBuffer, Filename);
474 break;
475
476 case CVT_LOWER_CASE_IDENTIFIERS:
477
478 AsLowerCaseIdentifiers (FileBuffer);
479 break;
480
481 case CVT_REMOVE_DEBUG_MACROS:
482
483 AsRemoveDebugMacros (FileBuffer);
484 break;
485
486 case CVT_TRIM_WHITESPACE:
487
488 AsTrimWhitespace (FileBuffer);
489 break;
490
491 case CVT_REMOVE_EMPTY_BLOCKS:
492
493 AsRemoveEmptyBlocks (FileBuffer, Filename);
494 break;
495
496 case CVT_REDUCE_TYPEDEFS:
497
498 AsReduceTypedefs (FileBuffer, "typedef union");
499 AsReduceTypedefs (FileBuffer, "typedef struct");
500 break;
501
502 case CVT_SPACES_TO_TABS4:
503
504 AsTabify4 (FileBuffer);
505 break;
506
507 case CVT_SPACES_TO_TABS8:
508
509 AsTabify8 (FileBuffer);
510 break;
511
512 case CVT_COUNT_SHORTMULTILINE_COMMENTS:
513
514 #ifdef ACPI_FUTURE_IMPLEMENTATION
515 AsTrimComments (FileBuffer, Filename);
516 #endif
517 break;
518
519 default:
520
521 printf ("Unknown conversion subfunction opcode\n");
522 break;
523 }
524 }
525
526 if (ConversionTable->NewHeader)
527 {
528 AsReplaceHeader (FileBuffer, ConversionTable->NewHeader);
529 }
530 }
531
532
533 /******************************************************************************
534 *
535 * FUNCTION: AsProcessOneFile
536 *
537 * DESCRIPTION: Process one source file. The file is opened, read entirely
538 * into a buffer, converted, then written to a new file.
539 *
540 ******************************************************************************/
541
542 ACPI_NATIVE_INT
543 AsProcessOneFile (
544 ACPI_CONVERSION_TABLE *ConversionTable,
545 char *SourcePath,
546 char *TargetPath,
547 int MaxPathLength,
548 char *Filename,
549 ACPI_NATIVE_INT FileType)
550 {
551 char *Pathname;
552 char *OutPathname;
553 int Status = 0;
554
555
556 /* Allocate a file pathname buffer for both source and target */
557
558 Pathname = calloc (MaxPathLength + strlen (Filename) + 2, 1);
559 if (!Pathname)
560 {
561 printf ("Could not allocate buffer for file pathnames\n");
562 return (-1);
563 }
564
565 Gbl_FileType = FileType;
566
567 /* Generate the source pathname and read the file */
568
569 if (SourcePath)
570 {
571 strcpy (Pathname, SourcePath);
572 strcat (Pathname, "/");
573 }
574
575 strcat (Pathname, Filename);
576
577 if (AsGetFile (Pathname, &Gbl_FileBuffer, &Gbl_FileSize))
578 {
579 Status = -1;
580 goto Exit1;
581 }
582
583 Gbl_HeaderSize = 0;
584 if (strstr (Filename, ".asl"))
585 {
586 Gbl_HeaderSize = LINES_IN_ASL_HEADER; /* Lines in default ASL header */
587 }
588 else if (strstr (Gbl_FileBuffer, LEGAL_HEADER_SIGNATURE))
589 {
590 Gbl_HeaderSize = LINES_IN_LEGAL_HEADER; /* Normal C file and H header */
591 }
592 else if (strstr (Gbl_FileBuffer, LINUX_HEADER_SIGNATURE))
593 {
594 Gbl_HeaderSize = LINES_IN_LINUX_HEADER; /* Linuxized C file and H header */
595 }
596
597 /* Process the file in the buffer */
598
599 Gbl_MadeChanges = FALSE;
600 if (!Gbl_IgnoreLoneLineFeeds && Gbl_HasLoneLineFeeds)
601 {
602 /*
603 * All lone LFs will be converted to CR/LF
604 * (when file is written, Windows version only)
605 */
606 printf ("Converting lone linefeeds\n");
607 Gbl_MadeChanges = TRUE;
608 }
609
610 AsConvertFile (ConversionTable, Gbl_FileBuffer, Pathname, FileType);
611
612 if (!(ConversionTable->Flags & FLG_NO_FILE_OUTPUT))
613 {
614 if (!(Gbl_Overwrite && !Gbl_MadeChanges))
615 {
616 /* Generate the target pathname and write the file */
617
618 OutPathname = calloc (MaxPathLength +
619 strlen (Filename) + 2 + strlen (TargetPath), 1);
620 if (!OutPathname)
621 {
622 printf ("Could not allocate buffer for file pathnames\n");
623 Status = -1;
624 goto Exit2;
625 }
626
627 strcpy (OutPathname, TargetPath);
628 if (SourcePath)
629 {
630 strcat (OutPathname, "/");
631 strcat (OutPathname, Filename);
632 }
633
634 AsPutFile (OutPathname, Gbl_FileBuffer, ConversionTable->Flags);
635 free (OutPathname);
636 }
637 }
638
639 Exit2:
640 free (Gbl_FileBuffer);
641
642 Exit1:
643 free (Pathname);
644 return (Status);
645 }
646
647
648 /******************************************************************************
649 *
650 * FUNCTION: AsCheckForDirectory
651 *
652 * DESCRIPTION: Check if the current file is a valid directory. If not,
653 * construct the full pathname for the source and target paths.
654 * Checks for the dot and dot-dot files (they are ignored)
655 *
656 ******************************************************************************/
657
658 ACPI_NATIVE_INT
659 AsCheckForDirectory (
660 char *SourceDirPath,
661 char *TargetDirPath,
662 char *Filename,
663 char **SourcePath,
664 char **TargetPath)
665 {
666 char *SrcPath;
667 char *TgtPath;
668
669
670 if (!(strcmp (Filename, ".")) ||
671 !(strcmp (Filename, "..")))
672 {
673 return (-1);
674 }
675
676 SrcPath = calloc (strlen (SourceDirPath) + strlen (Filename) + 2, 1);
677 if (!SrcPath)
678 {
679 printf ("Could not allocate buffer for directory source pathname\n");
680 return (-1);
681 }
682
683 TgtPath = calloc (strlen (TargetDirPath) + strlen (Filename) + 2, 1);
684 if (!TgtPath)
685 {
686 printf ("Could not allocate buffer for directory target pathname\n");
687 free (SrcPath);
688 return (-1);
689 }
690
691 strcpy (SrcPath, SourceDirPath);
692 strcat (SrcPath, "/");
693 strcat (SrcPath, Filename);
694
695 strcpy (TgtPath, TargetDirPath);
696 strcat (TgtPath, "/");
697 strcat (TgtPath, Filename);
698
699 *SourcePath = SrcPath;
700 *TargetPath = TgtPath;
701 return (0);
702 }
703
704
705 /******************************************************************************
706 *
707 * FUNCTION: AsGetFile
708 *
709 * DESCRIPTION: Open a file and read it entirely into a an allocated buffer
710 *
711 ******************************************************************************/
712
713 int
714 AsGetFile (
715 char *Filename,
716 char **FileBuffer,
717 UINT32 *FileSize)
718 {
719 FILE *File;
720 UINT32 Size;
721 char *Buffer;
722 size_t Actual;
723
724
725 /* Binary mode leaves CR/LF pairs */
726
727 File = fopen (Filename, "rb");
728 if (!File)
729 {
730 printf ("Could not open file %s\n", Filename);
731 return (-1);
732 }
733
734 /* Need file size to allocate a buffer */
735
736 Size = CmGetFileSize (File);
737 if (Size == ACPI_UINT32_MAX)
738 {
739 printf ("Could not get file size for %s\n", Filename);
740 goto ErrorExit;
741 }
742
743 /*
744 * Create a buffer for the entire file
745 * Add plenty extra buffer to accommodate string replacements
746 */
747 Gbl_TotalSize += Size;
748
749 Buffer = calloc (Size * 2, 1);
750 if (!Buffer)
751 {
752 printf ("Could not allocate buffer of size %u\n", Size * 2);
753 goto ErrorExit;
754 }
755
756 /* Read the entire file */
757
758 Actual = fread (Buffer, 1, Size, File);
759 if (Actual != Size)
760 {
761 printf ("Could not read the input file %s (%u bytes)\n",
762 Filename, Size);
763 goto ErrorFree;
764 }
765
766 Buffer [Size] = 0; /* Null terminate the buffer */
767 fclose (File);
768
769 /* Check for unix contamination */
770
771 Gbl_HasLoneLineFeeds = AsDetectLoneLineFeeds (Filename, Buffer);
772
773 /*
774 * Convert all CR/LF pairs to LF only. We do this locally so that
775 * this code is portable across operating systems.
776 */
777 AsConvertToLineFeeds (Buffer);
778
779 *FileBuffer = Buffer;
780 *FileSize = Size;
781 return (0);
782
783 ErrorFree:
784 free (Buffer);
785
786 ErrorExit:
787
788 fclose (File);
789 return (-1);
790 }
791
792
793 /******************************************************************************
794 *
795 * FUNCTION: AsPutFile
796 *
797 * DESCRIPTION: Create a new output file and write the entire contents of the
798 * buffer to the new file. Buffer must be a zero terminated string
799 *
800 ******************************************************************************/
801
802 int
803 AsPutFile (
804 char *Pathname,
805 char *FileBuffer,
806 UINT32 SystemFlags)
807 {
808 FILE *File;
809 UINT32 FileSize;
810 size_t Actual;
811 int Status = 0;
812
813
814 /* Create the target file */
815
816 if (!(SystemFlags & FLG_NO_CARRIAGE_RETURNS))
817 {
818 /* Put back the CR before each LF */
819
820 AsInsertCarriageReturns (FileBuffer);
821 }
822
823 File = fopen (Pathname, "w+b");
824 if (!File)
825 {
826 perror ("Could not create destination file");
827 printf ("Could not create destination file \"%s\"\n", Pathname);
828 return (-1);
829 }
830
831 /* Write the buffer to the file */
832
833 FileSize = strlen (FileBuffer);
834 Actual = fwrite (FileBuffer, 1, FileSize, File);
835 if (Actual != FileSize)
836 {
837 printf ("Error writing output file \"%s\"\n", Pathname);
838 Status = -1;
839 }
840
841 fclose (File);
842 return (Status);
843 }
844