utclib.c revision 1.1.1.4
1 /****************************************************************************** 2 * 3 * Module Name: cmclib - Local implementation of C library functions 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2014, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #define __CMCLIB_C__ 45 46 #include "acpi.h" 47 #include "accommon.h" 48 49 /* 50 * These implementations of standard C Library routines can optionally be 51 * used if a C library is not available. In general, they are less efficient 52 * than an inline or assembly implementation 53 */ 54 55 #define _COMPONENT ACPI_UTILITIES 56 ACPI_MODULE_NAME ("cmclib") 57 58 59 #ifndef ACPI_USE_SYSTEM_CLIBRARY 60 61 #define NEGATIVE 1 62 #define POSITIVE 0 63 64 65 /******************************************************************************* 66 * 67 * FUNCTION: AcpiUtMemcmp (memcmp) 68 * 69 * PARAMETERS: Buffer1 - First Buffer 70 * Buffer2 - Second Buffer 71 * Count - Maximum # of bytes to compare 72 * 73 * RETURN: Index where Buffers mismatched, or 0 if Buffers matched 74 * 75 * DESCRIPTION: Compare two Buffers, with a maximum length 76 * 77 ******************************************************************************/ 78 79 int 80 AcpiUtMemcmp ( 81 const char *Buffer1, 82 const char *Buffer2, 83 ACPI_SIZE Count) 84 { 85 86 for ( ; Count-- && (*Buffer1 == *Buffer2); Buffer1++, Buffer2++) 87 { 88 } 89 90 return ((Count == ACPI_SIZE_MAX) ? 0 : ((unsigned char) *Buffer1 - 91 (unsigned char) *Buffer2)); 92 } 93 94 95 /******************************************************************************* 96 * 97 * FUNCTION: AcpiUtMemcpy (memcpy) 98 * 99 * PARAMETERS: Dest - Target of the copy 100 * Src - Source buffer to copy 101 * Count - Number of bytes to copy 102 * 103 * RETURN: Dest 104 * 105 * DESCRIPTION: Copy arbitrary bytes of memory 106 * 107 ******************************************************************************/ 108 109 void * 110 AcpiUtMemcpy ( 111 void *Dest, 112 const void *Src, 113 ACPI_SIZE Count) 114 { 115 char *New = (char *) Dest; 116 char *Old = (char *) Src; 117 118 119 while (Count) 120 { 121 *New = *Old; 122 New++; 123 Old++; 124 Count--; 125 } 126 127 return (Dest); 128 } 129 130 131 /******************************************************************************* 132 * 133 * FUNCTION: AcpiUtMemset (memset) 134 * 135 * PARAMETERS: Dest - Buffer to set 136 * Value - Value to set each byte of memory 137 * Count - Number of bytes to set 138 * 139 * RETURN: Dest 140 * 141 * DESCRIPTION: Initialize a buffer to a known value. 142 * 143 ******************************************************************************/ 144 145 void * 146 AcpiUtMemset ( 147 void *Dest, 148 UINT8 Value, 149 ACPI_SIZE Count) 150 { 151 char *New = (char *) Dest; 152 153 154 while (Count) 155 { 156 *New = (char) Value; 157 New++; 158 Count--; 159 } 160 161 return (Dest); 162 } 163 164 165 /******************************************************************************* 166 * 167 * FUNCTION: AcpiUtStrlen (strlen) 168 * 169 * PARAMETERS: String - Null terminated string 170 * 171 * RETURN: Length 172 * 173 * DESCRIPTION: Returns the length of the input string 174 * 175 ******************************************************************************/ 176 177 178 ACPI_SIZE 179 AcpiUtStrlen ( 180 const char *String) 181 { 182 UINT32 Length = 0; 183 184 185 /* Count the string until a null is encountered */ 186 187 while (*String) 188 { 189 Length++; 190 String++; 191 } 192 193 return (Length); 194 } 195 196 197 /******************************************************************************* 198 * 199 * FUNCTION: AcpiUtStrcpy (strcpy) 200 * 201 * PARAMETERS: DstString - Target of the copy 202 * SrcString - The source string to copy 203 * 204 * RETURN: DstString 205 * 206 * DESCRIPTION: Copy a null terminated string 207 * 208 ******************************************************************************/ 209 210 char * 211 AcpiUtStrcpy ( 212 char *DstString, 213 const char *SrcString) 214 { 215 char *String = DstString; 216 217 218 /* Move bytes brute force */ 219 220 while (*SrcString) 221 { 222 *String = *SrcString; 223 224 String++; 225 SrcString++; 226 } 227 228 /* Null terminate */ 229 230 *String = 0; 231 return (DstString); 232 } 233 234 235 /******************************************************************************* 236 * 237 * FUNCTION: AcpiUtStrncpy (strncpy) 238 * 239 * PARAMETERS: DstString - Target of the copy 240 * SrcString - The source string to copy 241 * Count - Maximum # of bytes to copy 242 * 243 * RETURN: DstString 244 * 245 * DESCRIPTION: Copy a null terminated string, with a maximum length 246 * 247 ******************************************************************************/ 248 249 char * 250 AcpiUtStrncpy ( 251 char *DstString, 252 const char *SrcString, 253 ACPI_SIZE Count) 254 { 255 char *String = DstString; 256 257 258 /* Copy the string */ 259 260 for (String = DstString; 261 Count && (Count--, (*String++ = *SrcString++)); ) 262 {;} 263 264 /* Pad with nulls if necessary */ 265 266 while (Count--) 267 { 268 *String = 0; 269 String++; 270 } 271 272 /* Return original pointer */ 273 274 return (DstString); 275 } 276 277 278 /******************************************************************************* 279 * 280 * FUNCTION: AcpiUtStrcmp (strcmp) 281 * 282 * PARAMETERS: String1 - First string 283 * String2 - Second string 284 * 285 * RETURN: Index where strings mismatched, or 0 if strings matched 286 * 287 * DESCRIPTION: Compare two null terminated strings 288 * 289 ******************************************************************************/ 290 291 int 292 AcpiUtStrcmp ( 293 const char *String1, 294 const char *String2) 295 { 296 297 298 for ( ; (*String1 == *String2); String2++) 299 { 300 if (!*String1++) 301 { 302 return (0); 303 } 304 } 305 306 return ((unsigned char) *String1 - (unsigned char) *String2); 307 } 308 309 310 /******************************************************************************* 311 * 312 * FUNCTION: AcpiUtStrchr (strchr) 313 * 314 * PARAMETERS: String - Search string 315 * ch - character to search for 316 * 317 * RETURN: Ptr to char or NULL if not found 318 * 319 * DESCRIPTION: Search a string for a character 320 * 321 ******************************************************************************/ 322 323 char * 324 AcpiUtStrchr ( 325 const char *String, 326 int ch) 327 { 328 329 330 for ( ; (*String); String++) 331 { 332 if ((*String) == (char) ch) 333 { 334 return ((char *) String); 335 } 336 } 337 338 return (NULL); 339 } 340 341 342 /******************************************************************************* 343 * 344 * FUNCTION: AcpiUtStrncmp (strncmp) 345 * 346 * PARAMETERS: String1 - First string 347 * String2 - Second string 348 * Count - Maximum # of bytes to compare 349 * 350 * RETURN: Index where strings mismatched, or 0 if strings matched 351 * 352 * DESCRIPTION: Compare two null terminated strings, with a maximum length 353 * 354 ******************************************************************************/ 355 356 int 357 AcpiUtStrncmp ( 358 const char *String1, 359 const char *String2, 360 ACPI_SIZE Count) 361 { 362 363 364 for ( ; Count-- && (*String1 == *String2); String2++) 365 { 366 if (!*String1++) 367 { 368 return (0); 369 } 370 } 371 372 return ((Count == ACPI_SIZE_MAX) ? 0 : ((unsigned char) *String1 - 373 (unsigned char) *String2)); 374 } 375 376 377 /******************************************************************************* 378 * 379 * FUNCTION: AcpiUtStrcat (Strcat) 380 * 381 * PARAMETERS: DstString - Target of the copy 382 * SrcString - The source string to copy 383 * 384 * RETURN: DstString 385 * 386 * DESCRIPTION: Append a null terminated string to a null terminated string 387 * 388 ******************************************************************************/ 389 390 char * 391 AcpiUtStrcat ( 392 char *DstString, 393 const char *SrcString) 394 { 395 char *String; 396 397 398 /* Find end of the destination string */ 399 400 for (String = DstString; *String++; ) 401 { ; } 402 403 /* Concatenate the string */ 404 405 for (--String; (*String++ = *SrcString++); ) 406 { ; } 407 408 return (DstString); 409 } 410 411 412 /******************************************************************************* 413 * 414 * FUNCTION: AcpiUtStrncat (strncat) 415 * 416 * PARAMETERS: DstString - Target of the copy 417 * SrcString - The source string to copy 418 * Count - Maximum # of bytes to copy 419 * 420 * RETURN: DstString 421 * 422 * DESCRIPTION: Append a null terminated string to a null terminated string, 423 * with a maximum count. 424 * 425 ******************************************************************************/ 426 427 char * 428 AcpiUtStrncat ( 429 char *DstString, 430 const char *SrcString, 431 ACPI_SIZE Count) 432 { 433 char *String; 434 435 436 if (Count) 437 { 438 /* Find end of the destination string */ 439 440 for (String = DstString; *String++; ) 441 { ; } 442 443 /* Concatenate the string */ 444 445 for (--String; (*String++ = *SrcString++) && --Count; ) 446 { ; } 447 448 /* Null terminate if necessary */ 449 450 if (!Count) 451 { 452 *String = 0; 453 } 454 } 455 456 return (DstString); 457 } 458 459 460 /******************************************************************************* 461 * 462 * FUNCTION: AcpiUtStrstr (strstr) 463 * 464 * PARAMETERS: String1 - Target string 465 * String2 - Substring to search for 466 * 467 * RETURN: Where substring match starts, Null if no match found 468 * 469 * DESCRIPTION: Checks if String2 occurs in String1. This is not really a 470 * full implementation of strstr, only sufficient for command 471 * matching 472 * 473 ******************************************************************************/ 474 475 char * 476 AcpiUtStrstr ( 477 char *String1, 478 char *String2) 479 { 480 char *String; 481 482 483 if (AcpiUtStrlen (String2) > AcpiUtStrlen (String1)) 484 { 485 return (NULL); 486 } 487 488 /* Walk entire string, comparing the letters */ 489 490 for (String = String1; *String2; ) 491 { 492 if (*String2 != *String) 493 { 494 return (NULL); 495 } 496 497 String2++; 498 String++; 499 } 500 501 return (String1); 502 } 503 504 505 /******************************************************************************* 506 * 507 * FUNCTION: AcpiUtStrtoul (strtoul) 508 * 509 * PARAMETERS: String - Null terminated string 510 * Terminater - Where a pointer to the terminating byte is 511 * returned 512 * Base - Radix of the string 513 * 514 * RETURN: Converted value 515 * 516 * DESCRIPTION: Convert a string into a 32-bit unsigned value. 517 * Note: use AcpiUtStrtoul64 for 64-bit integers. 518 * 519 ******************************************************************************/ 520 521 UINT32 522 AcpiUtStrtoul ( 523 const char *String, 524 char **Terminator, 525 UINT32 Base) 526 { 527 UINT32 converted = 0; 528 UINT32 index; 529 UINT32 sign; 530 const char *StringStart; 531 UINT32 ReturnValue = 0; 532 ACPI_STATUS Status = AE_OK; 533 534 535 /* 536 * Save the value of the pointer to the buffer's first 537 * character, save the current errno value, and then 538 * skip over any white space in the buffer: 539 */ 540 StringStart = String; 541 while (ACPI_IS_SPACE (*String) || *String == '\t') 542 { 543 ++String; 544 } 545 546 /* 547 * The buffer may contain an optional plus or minus sign. 548 * If it does, then skip over it but remember what is was: 549 */ 550 if (*String == '-') 551 { 552 sign = NEGATIVE; 553 ++String; 554 } 555 else if (*String == '+') 556 { 557 ++String; 558 sign = POSITIVE; 559 } 560 else 561 { 562 sign = POSITIVE; 563 } 564 565 /* 566 * If the input parameter Base is zero, then we need to 567 * determine if it is octal, decimal, or hexadecimal: 568 */ 569 if (Base == 0) 570 { 571 if (*String == '0') 572 { 573 if (AcpiUtToLower (*(++String)) == 'x') 574 { 575 Base = 16; 576 ++String; 577 } 578 else 579 { 580 Base = 8; 581 } 582 } 583 else 584 { 585 Base = 10; 586 } 587 } 588 else if (Base < 2 || Base > 36) 589 { 590 /* 591 * The specified Base parameter is not in the domain of 592 * this function: 593 */ 594 goto done; 595 } 596 597 /* 598 * For octal and hexadecimal bases, skip over the leading 599 * 0 or 0x, if they are present. 600 */ 601 if (Base == 8 && *String == '0') 602 { 603 String++; 604 } 605 606 if (Base == 16 && 607 *String == '0' && 608 AcpiUtToLower (*(++String)) == 'x') 609 { 610 String++; 611 } 612 613 /* 614 * Main loop: convert the string to an unsigned long: 615 */ 616 while (*String) 617 { 618 if (ACPI_IS_DIGIT (*String)) 619 { 620 index = (UINT32) ((UINT8) *String - '0'); 621 } 622 else 623 { 624 index = (UINT32) AcpiUtToUpper (*String); 625 if (ACPI_IS_UPPER (index)) 626 { 627 index = index - 'A' + 10; 628 } 629 else 630 { 631 goto done; 632 } 633 } 634 635 if (index >= Base) 636 { 637 goto done; 638 } 639 640 /* 641 * Check to see if value is out of range: 642 */ 643 644 if (ReturnValue > ((ACPI_UINT32_MAX - (UINT32) index) / 645 (UINT32) Base)) 646 { 647 Status = AE_ERROR; 648 ReturnValue = 0; /* reset */ 649 } 650 else 651 { 652 ReturnValue *= Base; 653 ReturnValue += index; 654 converted = 1; 655 } 656 657 ++String; 658 } 659 660 done: 661 /* 662 * If appropriate, update the caller's pointer to the next 663 * unconverted character in the buffer. 664 */ 665 if (Terminator) 666 { 667 if (converted == 0 && ReturnValue == 0 && String != NULL) 668 { 669 *Terminator = (char *) StringStart; 670 } 671 else 672 { 673 *Terminator = (char *) String; 674 } 675 } 676 677 if (Status == AE_ERROR) 678 { 679 ReturnValue = ACPI_UINT32_MAX; 680 } 681 682 /* 683 * If a minus sign was present, then "the conversion is negated": 684 */ 685 if (sign == NEGATIVE) 686 { 687 ReturnValue = (ACPI_UINT32_MAX - ReturnValue) + 1; 688 } 689 690 return (ReturnValue); 691 } 692 693 694 /******************************************************************************* 695 * 696 * FUNCTION: AcpiUtToUpper (TOUPPER) 697 * 698 * PARAMETERS: c - Character to convert 699 * 700 * RETURN: Converted character as an int 701 * 702 * DESCRIPTION: Convert character to uppercase 703 * 704 ******************************************************************************/ 705 706 int 707 AcpiUtToUpper ( 708 int c) 709 { 710 711 return (ACPI_IS_LOWER(c) ? ((c)-0x20) : (c)); 712 } 713 714 715 /******************************************************************************* 716 * 717 * FUNCTION: AcpiUtToLower (TOLOWER) 718 * 719 * PARAMETERS: c - Character to convert 720 * 721 * RETURN: Converted character as an int 722 * 723 * DESCRIPTION: Convert character to lowercase 724 * 725 ******************************************************************************/ 726 727 int 728 AcpiUtToLower ( 729 int c) 730 { 731 732 return (ACPI_IS_UPPER(c) ? ((c)+0x20) : (c)); 733 } 734 735 736 /******************************************************************************* 737 * 738 * FUNCTION: is* functions 739 * 740 * DESCRIPTION: is* functions use the ctype table below 741 * 742 ******************************************************************************/ 743 744 const UINT8 _acpi_ctype[257] = { 745 _ACPI_CN, /* 0x00 0 NUL */ 746 _ACPI_CN, /* 0x01 1 SOH */ 747 _ACPI_CN, /* 0x02 2 STX */ 748 _ACPI_CN, /* 0x03 3 ETX */ 749 _ACPI_CN, /* 0x04 4 EOT */ 750 _ACPI_CN, /* 0x05 5 ENQ */ 751 _ACPI_CN, /* 0x06 6 ACK */ 752 _ACPI_CN, /* 0x07 7 BEL */ 753 _ACPI_CN, /* 0x08 8 BS */ 754 _ACPI_CN|_ACPI_SP, /* 0x09 9 TAB */ 755 _ACPI_CN|_ACPI_SP, /* 0x0A 10 LF */ 756 _ACPI_CN|_ACPI_SP, /* 0x0B 11 VT */ 757 _ACPI_CN|_ACPI_SP, /* 0x0C 12 FF */ 758 _ACPI_CN|_ACPI_SP, /* 0x0D 13 CR */ 759 _ACPI_CN, /* 0x0E 14 SO */ 760 _ACPI_CN, /* 0x0F 15 SI */ 761 _ACPI_CN, /* 0x10 16 DLE */ 762 _ACPI_CN, /* 0x11 17 DC1 */ 763 _ACPI_CN, /* 0x12 18 DC2 */ 764 _ACPI_CN, /* 0x13 19 DC3 */ 765 _ACPI_CN, /* 0x14 20 DC4 */ 766 _ACPI_CN, /* 0x15 21 NAK */ 767 _ACPI_CN, /* 0x16 22 SYN */ 768 _ACPI_CN, /* 0x17 23 ETB */ 769 _ACPI_CN, /* 0x18 24 CAN */ 770 _ACPI_CN, /* 0x19 25 EM */ 771 _ACPI_CN, /* 0x1A 26 SUB */ 772 _ACPI_CN, /* 0x1B 27 ESC */ 773 _ACPI_CN, /* 0x1C 28 FS */ 774 _ACPI_CN, /* 0x1D 29 GS */ 775 _ACPI_CN, /* 0x1E 30 RS */ 776 _ACPI_CN, /* 0x1F 31 US */ 777 _ACPI_XS|_ACPI_SP, /* 0x20 32 ' ' */ 778 _ACPI_PU, /* 0x21 33 '!' */ 779 _ACPI_PU, /* 0x22 34 '"' */ 780 _ACPI_PU, /* 0x23 35 '#' */ 781 _ACPI_PU, /* 0x24 36 '$' */ 782 _ACPI_PU, /* 0x25 37 '%' */ 783 _ACPI_PU, /* 0x26 38 '&' */ 784 _ACPI_PU, /* 0x27 39 ''' */ 785 _ACPI_PU, /* 0x28 40 '(' */ 786 _ACPI_PU, /* 0x29 41 ')' */ 787 _ACPI_PU, /* 0x2A 42 '*' */ 788 _ACPI_PU, /* 0x2B 43 '+' */ 789 _ACPI_PU, /* 0x2C 44 ',' */ 790 _ACPI_PU, /* 0x2D 45 '-' */ 791 _ACPI_PU, /* 0x2E 46 '.' */ 792 _ACPI_PU, /* 0x2F 47 '/' */ 793 _ACPI_XD|_ACPI_DI, /* 0x30 48 '0' */ 794 _ACPI_XD|_ACPI_DI, /* 0x31 49 '1' */ 795 _ACPI_XD|_ACPI_DI, /* 0x32 50 '2' */ 796 _ACPI_XD|_ACPI_DI, /* 0x33 51 '3' */ 797 _ACPI_XD|_ACPI_DI, /* 0x34 52 '4' */ 798 _ACPI_XD|_ACPI_DI, /* 0x35 53 '5' */ 799 _ACPI_XD|_ACPI_DI, /* 0x36 54 '6' */ 800 _ACPI_XD|_ACPI_DI, /* 0x37 55 '7' */ 801 _ACPI_XD|_ACPI_DI, /* 0x38 56 '8' */ 802 _ACPI_XD|_ACPI_DI, /* 0x39 57 '9' */ 803 _ACPI_PU, /* 0x3A 58 ':' */ 804 _ACPI_PU, /* 0x3B 59 ';' */ 805 _ACPI_PU, /* 0x3C 60 '<' */ 806 _ACPI_PU, /* 0x3D 61 '=' */ 807 _ACPI_PU, /* 0x3E 62 '>' */ 808 _ACPI_PU, /* 0x3F 63 '?' */ 809 _ACPI_PU, /* 0x40 64 '@' */ 810 _ACPI_XD|_ACPI_UP, /* 0x41 65 'A' */ 811 _ACPI_XD|_ACPI_UP, /* 0x42 66 'B' */ 812 _ACPI_XD|_ACPI_UP, /* 0x43 67 'C' */ 813 _ACPI_XD|_ACPI_UP, /* 0x44 68 'D' */ 814 _ACPI_XD|_ACPI_UP, /* 0x45 69 'E' */ 815 _ACPI_XD|_ACPI_UP, /* 0x46 70 'F' */ 816 _ACPI_UP, /* 0x47 71 'G' */ 817 _ACPI_UP, /* 0x48 72 'H' */ 818 _ACPI_UP, /* 0x49 73 'I' */ 819 _ACPI_UP, /* 0x4A 74 'J' */ 820 _ACPI_UP, /* 0x4B 75 'K' */ 821 _ACPI_UP, /* 0x4C 76 'L' */ 822 _ACPI_UP, /* 0x4D 77 'M' */ 823 _ACPI_UP, /* 0x4E 78 'N' */ 824 _ACPI_UP, /* 0x4F 79 'O' */ 825 _ACPI_UP, /* 0x50 80 'P' */ 826 _ACPI_UP, /* 0x51 81 'Q' */ 827 _ACPI_UP, /* 0x52 82 'R' */ 828 _ACPI_UP, /* 0x53 83 'S' */ 829 _ACPI_UP, /* 0x54 84 'T' */ 830 _ACPI_UP, /* 0x55 85 'U' */ 831 _ACPI_UP, /* 0x56 86 'V' */ 832 _ACPI_UP, /* 0x57 87 'W' */ 833 _ACPI_UP, /* 0x58 88 'X' */ 834 _ACPI_UP, /* 0x59 89 'Y' */ 835 _ACPI_UP, /* 0x5A 90 'Z' */ 836 _ACPI_PU, /* 0x5B 91 '[' */ 837 _ACPI_PU, /* 0x5C 92 '\' */ 838 _ACPI_PU, /* 0x5D 93 ']' */ 839 _ACPI_PU, /* 0x5E 94 '^' */ 840 _ACPI_PU, /* 0x5F 95 '_' */ 841 _ACPI_PU, /* 0x60 96 '`' */ 842 _ACPI_XD|_ACPI_LO, /* 0x61 97 'a' */ 843 _ACPI_XD|_ACPI_LO, /* 0x62 98 'b' */ 844 _ACPI_XD|_ACPI_LO, /* 0x63 99 'c' */ 845 _ACPI_XD|_ACPI_LO, /* 0x64 100 'd' */ 846 _ACPI_XD|_ACPI_LO, /* 0x65 101 'e' */ 847 _ACPI_XD|_ACPI_LO, /* 0x66 102 'f' */ 848 _ACPI_LO, /* 0x67 103 'g' */ 849 _ACPI_LO, /* 0x68 104 'h' */ 850 _ACPI_LO, /* 0x69 105 'i' */ 851 _ACPI_LO, /* 0x6A 106 'j' */ 852 _ACPI_LO, /* 0x6B 107 'k' */ 853 _ACPI_LO, /* 0x6C 108 'l' */ 854 _ACPI_LO, /* 0x6D 109 'm' */ 855 _ACPI_LO, /* 0x6E 110 'n' */ 856 _ACPI_LO, /* 0x6F 111 'o' */ 857 _ACPI_LO, /* 0x70 112 'p' */ 858 _ACPI_LO, /* 0x71 113 'q' */ 859 _ACPI_LO, /* 0x72 114 'r' */ 860 _ACPI_LO, /* 0x73 115 's' */ 861 _ACPI_LO, /* 0x74 116 't' */ 862 _ACPI_LO, /* 0x75 117 'u' */ 863 _ACPI_LO, /* 0x76 118 'v' */ 864 _ACPI_LO, /* 0x77 119 'w' */ 865 _ACPI_LO, /* 0x78 120 'x' */ 866 _ACPI_LO, /* 0x79 121 'y' */ 867 _ACPI_LO, /* 0x7A 122 'z' */ 868 _ACPI_PU, /* 0x7B 123 '{' */ 869 _ACPI_PU, /* 0x7C 124 '|' */ 870 _ACPI_PU, /* 0x7D 125 '}' */ 871 _ACPI_PU, /* 0x7E 126 '~' */ 872 _ACPI_CN, /* 0x7F 127 DEL */ 873 874 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 0x80 to 0x8F */ 875 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 0x90 to 0x9F */ 876 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 0xA0 to 0xAF */ 877 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 0xB0 to 0xBF */ 878 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 0xC0 to 0xCF */ 879 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 0xD0 to 0xDF */ 880 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 0xE0 to 0xEF */ 881 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 0xF0 to 0xFF */ 882 0 /* 0x100 */ 883 }; 884 885 886 #endif /* ACPI_USE_SYSTEM_CLIBRARY */ 887
Indexes created Thu Oct 02 14:10:14 GMT 2025