Home | History | Annotate | Line # | Download | only in utilities
utownerid.c revision 1.1.1.9
      1 /*******************************************************************************
      2  *
      3  * Module Name: utownerid - Support for Table/Method Owner IDs
      4  *
      5  ******************************************************************************/
      6 
      7 /*
      8  * Copyright (C) 2000 - 2019, Intel Corp.
      9  * All rights reserved.
     10  *
     11  * Redistribution and use in source and binary forms, with or without
     12  * modification, are permitted provided that the following conditions
     13  * are met:
     14  * 1. Redistributions of source code must retain the above copyright
     15  *    notice, this list of conditions, and the following disclaimer,
     16  *    without modification.
     17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
     18  *    substantially similar to the "NO WARRANTY" disclaimer below
     19  *    ("Disclaimer") and any redistribution must be conditioned upon
     20  *    including a substantially similar Disclaimer requirement for further
     21  *    binary redistribution.
     22  * 3. Neither the names of the above-listed copyright holders nor the names
     23  *    of any contributors may be used to endorse or promote products derived
     24  *    from this software without specific prior written permission.
     25  *
     26  * Alternatively, this software may be distributed under the terms of the
     27  * GNU General Public License ("GPL") version 2 as published by the Free
     28  * Software Foundation.
     29  *
     30  * NO WARRANTY
     31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
     34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
     35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
     39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
     40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     41  * POSSIBILITY OF SUCH DAMAGES.
     42  */
     43 
     44 #include "acpi.h"
     45 #include "accommon.h"
     46 #include "acnamesp.h"
     47 
     48 
     49 #define _COMPONENT          ACPI_UTILITIES
     50         ACPI_MODULE_NAME    ("utownerid")
     51 
     52 
     53 /*******************************************************************************
     54  *
     55  * FUNCTION:    AcpiUtAllocateOwnerId
     56  *
     57  * PARAMETERS:  OwnerId         - Where the new owner ID is returned
     58  *
     59  * RETURN:      Status
     60  *
     61  * DESCRIPTION: Allocate a table or method owner ID. The owner ID is used to
     62  *              track objects created by the table or method, to be deleted
     63  *              when the method exits or the table is unloaded.
     64  *
     65  ******************************************************************************/
     66 
     67 ACPI_STATUS
     68 AcpiUtAllocateOwnerId (
     69     ACPI_OWNER_ID           *OwnerId)
     70 {
     71     UINT32                  i;
     72     UINT32                  j;
     73     UINT32                  k;
     74     ACPI_STATUS             Status;
     75 
     76 
     77     ACPI_FUNCTION_TRACE (UtAllocateOwnerId);
     78 
     79 
     80     /* Guard against multiple allocations of ID to the same location */
     81 
     82     if (*OwnerId)
     83     {
     84         ACPI_ERROR ((AE_INFO,
     85             "Owner ID [0x%3.3X] already exists", *OwnerId));
     86         return_ACPI_STATUS (AE_ALREADY_EXISTS);
     87     }
     88 
     89     /* Mutex for the global ID mask */
     90 
     91     Status = AcpiUtAcquireMutex (ACPI_MTX_CACHES);
     92     if (ACPI_FAILURE (Status))
     93     {
     94         return_ACPI_STATUS (Status);
     95     }
     96 
     97     /*
     98      * Find a free owner ID, cycle through all possible IDs on repeated
     99      * allocations. (ACPI_NUM_OWNERID_MASKS + 1) because first index
    100      * may have to be scanned twice.
    101      */
    102     for (i = 0, j = AcpiGbl_LastOwnerIdIndex;
    103          i < (ACPI_NUM_OWNERID_MASKS + 1);
    104          i++, j++)
    105     {
    106         if (j >= ACPI_NUM_OWNERID_MASKS)
    107         {
    108             j = 0;  /* Wraparound to start of mask array */
    109         }
    110 
    111         for (k = AcpiGbl_NextOwnerIdOffset; k < 32; k++)
    112         {
    113             if (AcpiGbl_OwnerIdMask[j] == ACPI_UINT32_MAX)
    114             {
    115                 /* There are no free IDs in this mask */
    116 
    117                 break;
    118             }
    119 
    120             /*
    121              * Note: the UINT32 cast ensures that 1 is stored as a unsigned
    122              * integer. Omitting the cast may result in 1 being stored as an
    123              * int. Some compilers or runtime error detection may flag this as
    124              * an error.
    125              */
    126             if (!(AcpiGbl_OwnerIdMask[j] & ((UINT32) 1 << k)))
    127             {
    128                 /*
    129                  * Found a free ID. The actual ID is the bit index plus one,
    130                  * making zero an invalid Owner ID. Save this as the last ID
    131                  * allocated and update the global ID mask.
    132                  */
    133                 AcpiGbl_OwnerIdMask[j] |= ((UINT32) 1 << k);
    134 
    135                 AcpiGbl_LastOwnerIdIndex = (UINT8) j;
    136                 AcpiGbl_NextOwnerIdOffset = (UINT8) (k + 1);
    137 
    138                 /*
    139                  * Construct encoded ID from the index and bit position
    140                  *
    141                  * Note: Last [j].k (bit 4095) is never used and is marked
    142                  * permanently allocated (prevents +1 overflow)
    143                  */
    144                 *OwnerId = (ACPI_OWNER_ID) ((k + 1) + ACPI_MUL_32 (j));
    145 
    146                 ACPI_DEBUG_PRINT ((ACPI_DB_VALUES,
    147                     "Allocated OwnerId: 0x%3.3X\n", (unsigned int) *OwnerId));
    148                 goto Exit;
    149             }
    150         }
    151 
    152         AcpiGbl_NextOwnerIdOffset = 0;
    153     }
    154 
    155     /*
    156      * All OwnerIds have been allocated. This typically should
    157      * not happen since the IDs are reused after deallocation. The IDs are
    158      * allocated upon table load (one per table) and method execution, and
    159      * they are released when a table is unloaded or a method completes
    160      * execution.
    161      *
    162      * If this error happens, there may be very deep nesting of invoked
    163      * control methods, or there may be a bug where the IDs are not released.
    164      */
    165     Status = AE_OWNER_ID_LIMIT;
    166     ACPI_ERROR ((AE_INFO,
    167         "Could not allocate new OwnerId (4095 max), AE_OWNER_ID_LIMIT"));
    168 
    169 Exit:
    170     (void) AcpiUtReleaseMutex (ACPI_MTX_CACHES);
    171     return_ACPI_STATUS (Status);
    172 }
    173 
    174 
    175 /*******************************************************************************
    176  *
    177  * FUNCTION:    AcpiUtReleaseOwnerId
    178  *
    179  * PARAMETERS:  OwnerIdPtr          - Pointer to a previously allocated OwnerID
    180  *
    181  * RETURN:      None. No error is returned because we are either exiting a
    182  *              control method or unloading a table. Either way, we would
    183  *              ignore any error anyway.
    184  *
    185  * DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 255
    186  *
    187  ******************************************************************************/
    188 
    189 void
    190 AcpiUtReleaseOwnerId (
    191     ACPI_OWNER_ID           *OwnerIdPtr)
    192 {
    193     ACPI_OWNER_ID           OwnerId = *OwnerIdPtr;
    194     ACPI_STATUS             Status;
    195     UINT32                  Index;
    196     UINT32                  Bit;
    197 
    198 
    199     ACPI_FUNCTION_TRACE_U32 (UtReleaseOwnerId, OwnerId);
    200 
    201 
    202     /* Always clear the input OwnerId (zero is an invalid ID) */
    203 
    204     *OwnerIdPtr = 0;
    205 
    206     /* Zero is not a valid OwnerID */
    207 
    208     if (OwnerId == 0)
    209     {
    210         ACPI_ERROR ((AE_INFO, "Invalid OwnerId: 0x%3.3X", OwnerId));
    211         return_VOID;
    212     }
    213 
    214     /* Mutex for the global ID mask */
    215 
    216     Status = AcpiUtAcquireMutex (ACPI_MTX_CACHES);
    217     if (ACPI_FAILURE (Status))
    218     {
    219         return_VOID;
    220     }
    221 
    222     /* Normalize the ID to zero */
    223 
    224     OwnerId--;
    225 
    226     /* Decode ID to index/offset pair */
    227 
    228     Index = ACPI_DIV_32 (OwnerId);
    229     Bit = (UINT32) 1 << ACPI_MOD_32 (OwnerId);
    230 
    231     /* Free the owner ID only if it is valid */
    232 
    233     if (AcpiGbl_OwnerIdMask[Index] & Bit)
    234     {
    235         AcpiGbl_OwnerIdMask[Index] ^= Bit;
    236     }
    237     else
    238     {
    239         ACPI_ERROR ((AE_INFO,
    240             "Attempted release of non-allocated OwnerId: 0x%3.3X", OwnerId + 1));
    241     }
    242 
    243     (void) AcpiUtReleaseMutex (ACPI_MTX_CACHES);
    244     return_VOID;
    245 }
    246