Home | History | Annotate | Line # | Download | only in utilities
utxface.c revision 1.1.1.13
      1 /******************************************************************************
      2  *
      3  * Module Name: utxface - External interfaces, miscellaneous utility functions
      4  *
      5  *****************************************************************************/
      6 
      7 /*
      8  * Copyright (C) 2000 - 2021, Intel Corp.
      9  * All rights reserved.
     10  *
     11  * Redistribution and use in source and binary forms, with or without
     12  * modification, are permitted provided that the following conditions
     13  * are met:
     14  * 1. Redistributions of source code must retain the above copyright
     15  *    notice, this list of conditions, and the following disclaimer,
     16  *    without modification.
     17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
     18  *    substantially similar to the "NO WARRANTY" disclaimer below
     19  *    ("Disclaimer") and any redistribution must be conditioned upon
     20  *    including a substantially similar Disclaimer requirement for further
     21  *    binary redistribution.
     22  * 3. Neither the names of the above-listed copyright holders nor the names
     23  *    of any contributors may be used to endorse or promote products derived
     24  *    from this software without specific prior written permission.
     25  *
     26  * Alternatively, this software may be distributed under the terms of the
     27  * GNU General Public License ("GPL") version 2 as published by the Free
     28  * Software Foundation.
     29  *
     30  * NO WARRANTY
     31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
     34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
     35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
     39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
     40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     41  * POSSIBILITY OF SUCH DAMAGES.
     42  */
     43 
     44 #define EXPORT_ACPI_INTERFACES
     45 
     46 #include "acpi.h"
     47 #include "accommon.h"
     48 #include "acdebug.h"
     49 
     50 #define _COMPONENT          ACPI_UTILITIES
     51         ACPI_MODULE_NAME    ("utxface")
     52 
     53 
     54 /*******************************************************************************
     55  *
     56  * FUNCTION:    AcpiTerminate
     57  *
     58  * PARAMETERS:  None
     59  *
     60  * RETURN:      Status
     61  *
     62  * DESCRIPTION: Shutdown the ACPICA subsystem and release all resources.
     63  *
     64  ******************************************************************************/
     65 
     66 ACPI_STATUS ACPI_INIT_FUNCTION
     67 AcpiTerminate (
     68     void)
     69 {
     70     ACPI_STATUS         Status;
     71 
     72 
     73     ACPI_FUNCTION_TRACE (AcpiTerminate);
     74 
     75 
     76     /* Shutdown and free all resources */
     77 
     78     AcpiUtSubsystemShutdown ();
     79 
     80     /* Free the mutex objects */
     81 
     82     AcpiUtMutexTerminate ();
     83 
     84     /* Now we can shutdown the OS-dependent layer */
     85 
     86     Status = AcpiOsTerminate ();
     87     return_ACPI_STATUS (Status);
     88 }
     89 
     90 ACPI_EXPORT_SYMBOL_INIT (AcpiTerminate)
     91 
     92 
     93 #ifndef ACPI_ASL_COMPILER
     94 /*******************************************************************************
     95  *
     96  * FUNCTION:    AcpiSubsystemStatus
     97  *
     98  * PARAMETERS:  None
     99  *
    100  * RETURN:      Status of the ACPI subsystem
    101  *
    102  * DESCRIPTION: Other drivers that use the ACPI subsystem should call this
    103  *              before making any other calls, to ensure the subsystem
    104  *              initialized successfully.
    105  *
    106  ******************************************************************************/
    107 
    108 ACPI_STATUS
    109 AcpiSubsystemStatus (
    110     void)
    111 {
    112 
    113     if (AcpiGbl_StartupFlags & ACPI_INITIALIZED_OK)
    114     {
    115         return (AE_OK);
    116     }
    117     else
    118     {
    119         return (AE_ERROR);
    120     }
    121 }
    122 
    123 ACPI_EXPORT_SYMBOL (AcpiSubsystemStatus)
    124 
    125 
    126 /*******************************************************************************
    127  *
    128  * FUNCTION:    AcpiGetSystemInfo
    129  *
    130  * PARAMETERS:  OutBuffer       - A buffer to receive the resources for the
    131  *                                device
    132  *
    133  * RETURN:      Status          - the status of the call
    134  *
    135  * DESCRIPTION: This function is called to get information about the current
    136  *              state of the ACPI subsystem. It will return system information
    137  *              in the OutBuffer.
    138  *
    139  *              If the function fails an appropriate status will be returned
    140  *              and the value of OutBuffer is undefined.
    141  *
    142  ******************************************************************************/
    143 
    144 ACPI_STATUS
    145 AcpiGetSystemInfo (
    146     ACPI_BUFFER             *OutBuffer)
    147 {
    148     ACPI_SYSTEM_INFO        *InfoPtr;
    149     ACPI_STATUS             Status;
    150 
    151 
    152     ACPI_FUNCTION_TRACE (AcpiGetSystemInfo);
    153 
    154 
    155     /* Parameter validation */
    156 
    157     Status = AcpiUtValidateBuffer (OutBuffer);
    158     if (ACPI_FAILURE (Status))
    159     {
    160         return_ACPI_STATUS (Status);
    161     }
    162 
    163     /* Validate/Allocate/Clear caller buffer */
    164 
    165     Status = AcpiUtInitializeBuffer (OutBuffer, sizeof (ACPI_SYSTEM_INFO));
    166     if (ACPI_FAILURE (Status))
    167     {
    168         return_ACPI_STATUS (Status);
    169     }
    170 
    171     /*
    172      * Populate the return buffer
    173      */
    174     InfoPtr = (ACPI_SYSTEM_INFO *) OutBuffer->Pointer;
    175     InfoPtr->AcpiCaVersion = ACPI_CA_VERSION;
    176 
    177     /* System flags (ACPI capabilities) */
    178 
    179     InfoPtr->Flags = ACPI_SYS_MODE_ACPI;
    180 
    181     /* Timer resolution - 24 or 32 bits  */
    182 
    183     if (AcpiGbl_FADT.Flags & ACPI_FADT_32BIT_TIMER)
    184     {
    185         InfoPtr->TimerResolution = 24;
    186     }
    187     else
    188     {
    189         InfoPtr->TimerResolution = 32;
    190     }
    191 
    192     /* Clear the reserved fields */
    193 
    194     InfoPtr->Reserved1 = 0;
    195     InfoPtr->Reserved2 = 0;
    196 
    197     /* Current debug levels */
    198 
    199     InfoPtr->DebugLayer = AcpiDbgLayer;
    200     InfoPtr->DebugLevel = AcpiDbgLevel;
    201 
    202     return_ACPI_STATUS (AE_OK);
    203 }
    204 
    205 ACPI_EXPORT_SYMBOL (AcpiGetSystemInfo)
    206 
    207 
    208 /*******************************************************************************
    209  *
    210  * FUNCTION:    AcpiGetStatistics
    211  *
    212  * PARAMETERS:  Stats           - Where the statistics are returned
    213  *
    214  * RETURN:      Status          - the status of the call
    215  *
    216  * DESCRIPTION: Get the contents of the various system counters
    217  *
    218  ******************************************************************************/
    219 
    220 ACPI_STATUS
    221 AcpiGetStatistics (
    222     ACPI_STATISTICS         *Stats)
    223 {
    224     ACPI_FUNCTION_TRACE (AcpiGetStatistics);
    225 
    226 
    227     /* Parameter validation */
    228 
    229     if (!Stats)
    230     {
    231         return_ACPI_STATUS (AE_BAD_PARAMETER);
    232     }
    233 
    234     /* Various interrupt-based event counters */
    235 
    236     Stats->SciCount = AcpiSciCount;
    237     Stats->GpeCount = AcpiGpeCount;
    238 
    239     memcpy (Stats->FixedEventCount, AcpiFixedEventCount,
    240         sizeof (AcpiFixedEventCount));
    241 
    242     /* Other counters */
    243 
    244     Stats->MethodCount = AcpiMethodCount;
    245     return_ACPI_STATUS (AE_OK);
    246 }
    247 
    248 ACPI_EXPORT_SYMBOL (AcpiGetStatistics)
    249 
    250 
    251 /*****************************************************************************
    252  *
    253  * FUNCTION:    AcpiInstallInitializationHandler
    254  *
    255  * PARAMETERS:  Handler             - Callback procedure
    256  *              Function            - Not (currently) used, see below
    257  *
    258  * RETURN:      Status
    259  *
    260  * DESCRIPTION: Install an initialization handler
    261  *
    262  * TBD: When a second function is added, must save the Function also.
    263  *
    264  ****************************************************************************/
    265 
    266 ACPI_STATUS
    267 AcpiInstallInitializationHandler (
    268     ACPI_INIT_HANDLER       Handler,
    269     UINT32                  Function)
    270 {
    271 
    272     if (!Handler)
    273     {
    274         return (AE_BAD_PARAMETER);
    275     }
    276 
    277     if (AcpiGbl_InitHandler)
    278     {
    279         return (AE_ALREADY_EXISTS);
    280     }
    281 
    282     AcpiGbl_InitHandler = Handler;
    283     return (AE_OK);
    284 }
    285 
    286 ACPI_EXPORT_SYMBOL (AcpiInstallInitializationHandler)
    287 
    288 
    289 /*****************************************************************************
    290  *
    291  * FUNCTION:    AcpiPurgeCachedObjects
    292  *
    293  * PARAMETERS:  None
    294  *
    295  * RETURN:      Status
    296  *
    297  * DESCRIPTION: Empty all caches (delete the cached objects)
    298  *
    299  ****************************************************************************/
    300 
    301 ACPI_STATUS
    302 AcpiPurgeCachedObjects (
    303     void)
    304 {
    305     ACPI_FUNCTION_TRACE (AcpiPurgeCachedObjects);
    306 
    307 
    308     (void) AcpiOsPurgeCache (AcpiGbl_StateCache);
    309     (void) AcpiOsPurgeCache (AcpiGbl_OperandCache);
    310     (void) AcpiOsPurgeCache (AcpiGbl_PsNodeCache);
    311     (void) AcpiOsPurgeCache (AcpiGbl_PsNodeExtCache);
    312 
    313     return_ACPI_STATUS (AE_OK);
    314 }
    315 
    316 ACPI_EXPORT_SYMBOL (AcpiPurgeCachedObjects)
    317 
    318 
    319 /*****************************************************************************
    320  *
    321  * FUNCTION:    AcpiInstallInterface
    322  *
    323  * PARAMETERS:  InterfaceName       - The interface to install
    324  *
    325  * RETURN:      Status
    326  *
    327  * DESCRIPTION: Install an _OSI interface to the global list
    328  *
    329  ****************************************************************************/
    330 
    331 ACPI_STATUS
    332 AcpiInstallInterface (
    333     ACPI_STRING             InterfaceName)
    334 {
    335     ACPI_STATUS             Status;
    336     ACPI_INTERFACE_INFO     *InterfaceInfo;
    337 
    338 
    339     /* Parameter validation */
    340 
    341     if (!InterfaceName || (strlen (InterfaceName) == 0))
    342     {
    343         return (AE_BAD_PARAMETER);
    344     }
    345 
    346     Status = AcpiOsAcquireMutex (AcpiGbl_OsiMutex, ACPI_WAIT_FOREVER);
    347     if (ACPI_FAILURE (Status))
    348     {
    349         return (Status);
    350     }
    351 
    352     /* Check if the interface name is already in the global list */
    353 
    354     InterfaceInfo = AcpiUtGetInterface (InterfaceName);
    355     if (InterfaceInfo)
    356     {
    357         /*
    358          * The interface already exists in the list. This is OK if the
    359          * interface has been marked invalid -- just clear the bit.
    360          */
    361         if (InterfaceInfo->Flags & ACPI_OSI_INVALID)
    362         {
    363             InterfaceInfo->Flags &= ~ACPI_OSI_INVALID;
    364             Status = AE_OK;
    365         }
    366         else
    367         {
    368             Status = AE_ALREADY_EXISTS;
    369         }
    370     }
    371     else
    372     {
    373         /* New interface name, install into the global list */
    374 
    375         Status = AcpiUtInstallInterface (InterfaceName);
    376     }
    377 
    378     AcpiOsReleaseMutex (AcpiGbl_OsiMutex);
    379     return (Status);
    380 }
    381 
    382 ACPI_EXPORT_SYMBOL (AcpiInstallInterface)
    383 
    384 
    385 /*****************************************************************************
    386  *
    387  * FUNCTION:    AcpiRemoveInterface
    388  *
    389  * PARAMETERS:  InterfaceName       - The interface to remove
    390  *
    391  * RETURN:      Status
    392  *
    393  * DESCRIPTION: Remove an _OSI interface from the global list
    394  *
    395  ****************************************************************************/
    396 
    397 ACPI_STATUS
    398 AcpiRemoveInterface (
    399     ACPI_STRING             InterfaceName)
    400 {
    401     ACPI_STATUS             Status;
    402 
    403 
    404     /* Parameter validation */
    405 
    406     if (!InterfaceName || (strlen (InterfaceName) == 0))
    407     {
    408         return (AE_BAD_PARAMETER);
    409     }
    410 
    411     Status = AcpiOsAcquireMutex (AcpiGbl_OsiMutex, ACPI_WAIT_FOREVER);
    412     if (ACPI_FAILURE (Status))
    413     {
    414         return (Status);
    415     }
    416 
    417     Status = AcpiUtRemoveInterface (InterfaceName);
    418 
    419     AcpiOsReleaseMutex (AcpiGbl_OsiMutex);
    420     return (Status);
    421 }
    422 
    423 ACPI_EXPORT_SYMBOL (AcpiRemoveInterface)
    424 
    425 
    426 /*****************************************************************************
    427  *
    428  * FUNCTION:    AcpiInstallInterfaceHandler
    429  *
    430  * PARAMETERS:  Handler             - The _OSI interface handler to install
    431  *                                    NULL means "remove existing handler"
    432  *
    433  * RETURN:      Status
    434  *
    435  * DESCRIPTION: Install a handler for the predefined _OSI ACPI method.
    436  *              invoked during execution of the internal implementation of
    437  *              _OSI. A NULL handler simply removes any existing handler.
    438  *
    439  ****************************************************************************/
    440 
    441 ACPI_STATUS
    442 AcpiInstallInterfaceHandler (
    443     ACPI_INTERFACE_HANDLER  Handler)
    444 {
    445     ACPI_STATUS             Status;
    446 
    447 
    448     Status = AcpiOsAcquireMutex (AcpiGbl_OsiMutex, ACPI_WAIT_FOREVER);
    449     if (ACPI_FAILURE (Status))
    450     {
    451         return (Status);
    452     }
    453 
    454     if (Handler && AcpiGbl_InterfaceHandler)
    455     {
    456         Status = AE_ALREADY_EXISTS;
    457     }
    458     else
    459     {
    460         AcpiGbl_InterfaceHandler = Handler;
    461     }
    462 
    463     AcpiOsReleaseMutex (AcpiGbl_OsiMutex);
    464     return (Status);
    465 }
    466 
    467 ACPI_EXPORT_SYMBOL (AcpiInstallInterfaceHandler)
    468 
    469 
    470 /*****************************************************************************
    471  *
    472  * FUNCTION:    AcpiUpdateInterfaces
    473  *
    474  * PARAMETERS:  Action              - Actions to be performed during the
    475  *                                    update
    476  *
    477  * RETURN:      Status
    478  *
    479  * DESCRIPTION: Update _OSI interface strings, disabling or enabling OS vendor
    480  *              string or/and feature group strings.
    481  *
    482  ****************************************************************************/
    483 
    484 ACPI_STATUS
    485 AcpiUpdateInterfaces (
    486     UINT8                   Action)
    487 {
    488     ACPI_STATUS             Status;
    489 
    490 
    491     Status = AcpiOsAcquireMutex (AcpiGbl_OsiMutex, ACPI_WAIT_FOREVER);
    492     if (ACPI_FAILURE (Status))
    493     {
    494         return (Status);
    495     }
    496 
    497     Status = AcpiUtUpdateInterfaces (Action);
    498 
    499     AcpiOsReleaseMutex (AcpiGbl_OsiMutex);
    500     return (Status);
    501 }
    502 
    503 
    504 /*****************************************************************************
    505  *
    506  * FUNCTION:    AcpiCheckAddressRange
    507  *
    508  * PARAMETERS:  SpaceId             - Address space ID
    509  *              Address             - Start address
    510  *              Length              - Length
    511  *              Warn                - TRUE if warning on overlap desired
    512  *
    513  * RETURN:      Count of the number of conflicts detected.
    514  *
    515  * DESCRIPTION: Check if the input address range overlaps any of the
    516  *              ASL operation region address ranges.
    517  *
    518  ****************************************************************************/
    519 
    520 UINT32
    521 AcpiCheckAddressRange (
    522     ACPI_ADR_SPACE_TYPE     SpaceId,
    523     ACPI_PHYSICAL_ADDRESS   Address,
    524     ACPI_SIZE               Length,
    525     BOOLEAN                 Warn)
    526 {
    527     UINT32                  Overlaps;
    528     ACPI_STATUS             Status;
    529 
    530 
    531     Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE);
    532     if (ACPI_FAILURE (Status))
    533     {
    534         return (0);
    535     }
    536 
    537     Overlaps = AcpiUtCheckAddressRange (SpaceId, Address,
    538         (UINT32) Length, Warn);
    539 
    540     (void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE);
    541     return (Overlaps);
    542 }
    543 
    544 ACPI_EXPORT_SYMBOL (AcpiCheckAddressRange)
    545 
    546 #endif /* !ACPI_ASL_COMPILER */
    547 
    548 
    549 /*******************************************************************************
    550  *
    551  * FUNCTION:    AcpiDecodePldBuffer
    552  *
    553  * PARAMETERS:  InBuffer            - Buffer returned by _PLD method
    554  *              Length              - Length of the InBuffer
    555  *              ReturnBuffer        - Where the decode buffer is returned
    556  *
    557  * RETURN:      Status and the decoded _PLD buffer. User must deallocate
    558  *              the buffer via ACPI_FREE.
    559  *
    560  * DESCRIPTION: Decode the bit-packed buffer returned by the _PLD method into
    561  *              a local struct that is much more useful to an ACPI driver.
    562  *
    563  ******************************************************************************/
    564 
    565 ACPI_STATUS
    566 AcpiDecodePldBuffer (
    567     UINT8                   *InBuffer,
    568     ACPI_SIZE               Length,
    569     ACPI_PLD_INFO           **ReturnBuffer)
    570 {
    571     ACPI_PLD_INFO           *PldInfo;
    572     UINT32                  *Buffer = ACPI_CAST_PTR (UINT32, InBuffer);
    573     UINT32                  Dword;
    574 
    575 
    576     /* Parameter validation */
    577 
    578     if (!InBuffer || !ReturnBuffer || (Length < ACPI_PLD_REV1_BUFFER_SIZE))
    579     {
    580         return (AE_BAD_PARAMETER);
    581     }
    582 
    583     PldInfo = ACPI_ALLOCATE_ZEROED (sizeof (ACPI_PLD_INFO));
    584     if (!PldInfo)
    585     {
    586         return (AE_NO_MEMORY);
    587     }
    588 
    589     /* First 32-bit DWord */
    590 
    591     ACPI_MOVE_32_TO_32 (&Dword, &Buffer[0]);
    592     PldInfo->Revision =             ACPI_PLD_GET_REVISION (&Dword);
    593     PldInfo->IgnoreColor =          ACPI_PLD_GET_IGNORE_COLOR (&Dword);
    594     PldInfo->Red =                  ACPI_PLD_GET_RED (&Dword);
    595     PldInfo->Green =                ACPI_PLD_GET_GREEN (&Dword);
    596     PldInfo->Blue =                 ACPI_PLD_GET_BLUE (&Dword);
    597 
    598     /* Second 32-bit DWord */
    599 
    600     ACPI_MOVE_32_TO_32 (&Dword, &Buffer[1]);
    601     PldInfo->Width =                ACPI_PLD_GET_WIDTH (&Dword);
    602     PldInfo->Height =               ACPI_PLD_GET_HEIGHT(&Dword);
    603 
    604     /* Third 32-bit DWord */
    605 
    606     ACPI_MOVE_32_TO_32 (&Dword, &Buffer[2]);
    607     PldInfo->UserVisible =          ACPI_PLD_GET_USER_VISIBLE (&Dword);
    608     PldInfo->Dock =                 ACPI_PLD_GET_DOCK (&Dword);
    609     PldInfo->Lid =                  ACPI_PLD_GET_LID (&Dword);
    610     PldInfo->Panel =                ACPI_PLD_GET_PANEL (&Dword);
    611     PldInfo->VerticalPosition =     ACPI_PLD_GET_VERTICAL (&Dword);
    612     PldInfo->HorizontalPosition =   ACPI_PLD_GET_HORIZONTAL (&Dword);
    613     PldInfo->Shape =                ACPI_PLD_GET_SHAPE (&Dword);
    614     PldInfo->GroupOrientation =     ACPI_PLD_GET_ORIENTATION (&Dword);
    615     PldInfo->GroupToken =           ACPI_PLD_GET_TOKEN (&Dword);
    616     PldInfo->GroupPosition =        ACPI_PLD_GET_POSITION (&Dword);
    617     PldInfo->Bay =                  ACPI_PLD_GET_BAY (&Dword);
    618 
    619     /* Fourth 32-bit DWord */
    620 
    621     ACPI_MOVE_32_TO_32 (&Dword, &Buffer[3]);
    622     PldInfo->Ejectable =            ACPI_PLD_GET_EJECTABLE (&Dword);
    623     PldInfo->OspmEjectRequired =    ACPI_PLD_GET_OSPM_EJECT (&Dword);
    624     PldInfo->CabinetNumber =        ACPI_PLD_GET_CABINET (&Dword);
    625     PldInfo->CardCageNumber =       ACPI_PLD_GET_CARD_CAGE (&Dword);
    626     PldInfo->Reference =            ACPI_PLD_GET_REFERENCE (&Dword);
    627     PldInfo->Rotation =             ACPI_PLD_GET_ROTATION (&Dword);
    628     PldInfo->Order =                ACPI_PLD_GET_ORDER (&Dword);
    629 
    630     if (Length >= ACPI_PLD_REV2_BUFFER_SIZE)
    631     {
    632         /* Fifth 32-bit DWord (Revision 2 of _PLD) */
    633 
    634         ACPI_MOVE_32_TO_32 (&Dword, &Buffer[4]);
    635         PldInfo->VerticalOffset =       ACPI_PLD_GET_VERT_OFFSET (&Dword);
    636         PldInfo->HorizontalOffset =     ACPI_PLD_GET_HORIZ_OFFSET (&Dword);
    637     }
    638 
    639     *ReturnBuffer = PldInfo;
    640     return (AE_OK);
    641 }
    642 
    643 ACPI_EXPORT_SYMBOL (AcpiDecodePldBuffer)
    644