xref: /src/sys/external/bsd/acpica/dist/utilities/utxfinit.c

/******************************************************************************
 *
 * Module Name: utxfinit - External interfaces for ACPICA initialization
 *
 *****************************************************************************/

/*
 * Copyright (C) 2000 - 2014, Intel Corp.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */

#define __UTXFINIT_C__
#define EXPORT_ACPI_INTERFACES

#include "acpi.h"
#include "accommon.h"
#include "acevents.h"
#include "acnamesp.h"
#include "acdebug.h"
#include "actables.h"

#define _COMPONENT          ACPI_UTILITIES
        ACPI_MODULE_NAME    ("utxfinit")


/*******************************************************************************
 *
 * FUNCTION:    AcpiInitializeSubsystem
 *
 * PARAMETERS:  None
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Initializes all global variables. This is the first function
 *              called, so any early initialization belongs here.
 *
 ******************************************************************************/

ACPI_STATUS
AcpiInitializeSubsystem (
    void)
{
    ACPI_STATUS             Status;


    ACPI_FUNCTION_TRACE (AcpiInitializeSubsystem);


    AcpiGbl_StartupFlags = ACPI_SUBSYSTEM_INITIALIZE;
    ACPI_DEBUG_EXEC (AcpiUtInitStackPtrTrace ());

    /* Initialize the OS-Dependent layer */

    Status = AcpiOsInitialize ();
    if (ACPI_FAILURE (Status))
    {
        ACPI_EXCEPTION ((AE_INFO, Status, "During OSL initialization"));
        return_ACPI_STATUS (Status);
    }

    /* Initialize all globals used by the subsystem */

    Status = AcpiUtInitGlobals ();
    if (ACPI_FAILURE (Status))
    {
        ACPI_EXCEPTION ((AE_INFO, Status, "During initialization of globals"));
        return_ACPI_STATUS (Status);
    }

    /* Create the default mutex objects */

    Status = AcpiUtMutexInitialize ();
    if (ACPI_FAILURE (Status))
    {
        ACPI_EXCEPTION ((AE_INFO, Status, "During Global Mutex creation"));
        return_ACPI_STATUS (Status);
    }

    /*
     * Initialize the namespace manager and
     * the root of the namespace tree
     */
    Status = AcpiNsRootInitialize ();
    if (ACPI_FAILURE (Status))
    {
        ACPI_EXCEPTION ((AE_INFO, Status, "During Namespace initialization"));
        return_ACPI_STATUS (Status);
    }

    /* Initialize the global OSI interfaces list with the static names */

    Status = AcpiUtInitializeInterfaces ();
    if (ACPI_FAILURE (Status))
    {
        ACPI_EXCEPTION ((AE_INFO, Status, "During OSI interfaces initialization"));
        return_ACPI_STATUS (Status);
    }

    /* If configured, initialize the AML debugger */

#ifdef ACPI_DEBUGGER
    Status = AcpiDbInitialize ();
    if (ACPI_FAILURE (Status))
    {
        ACPI_EXCEPTION ((AE_INFO, Status, "During Debugger initialization"));
        return_ACPI_STATUS (Status);
    }
#endif

    return_ACPI_STATUS (AE_OK);
}

ACPI_EXPORT_SYMBOL_INIT (AcpiInitializeSubsystem)


/*******************************************************************************
 *
 * FUNCTION:    AcpiEnableSubsystem
 *
 * PARAMETERS:  Flags               - Init/enable Options
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Completes the subsystem initialization including hardware.
 *              Puts system into ACPI mode if it isn't already.
 *
 ******************************************************************************/

ACPI_STATUS
AcpiEnableSubsystem (
    UINT32                  Flags)
{
    ACPI_STATUS             Status = AE_OK;


    ACPI_FUNCTION_TRACE (AcpiEnableSubsystem);


#if (!ACPI_REDUCED_HARDWARE)

    /* Enable ACPI mode */

    if (!(Flags & ACPI_NO_ACPI_ENABLE))
    {
        ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "[Init] Going into ACPI mode\n"));

        AcpiGbl_OriginalMode = AcpiHwGetMode();

        Status = AcpiEnable ();
        if (ACPI_FAILURE (Status))
        {
            ACPI_WARNING ((AE_INFO, "AcpiEnable failed"));
            return_ACPI_STATUS (Status);
        }
    }

    /*
     * Obtain a permanent mapping for the FACS. This is required for the
     * Global Lock and the Firmware Waking Vector
     */
    Status = AcpiTbInitializeFacs ();
    if (ACPI_FAILURE (Status))
    {
        ACPI_WARNING ((AE_INFO, "Could not map the FACS table"));
        return_ACPI_STATUS (Status);
    }

#endif /* !ACPI_REDUCED_HARDWARE */

    /*
     * Install the default OpRegion handlers. These are installed unless
     * other handlers have already been installed via the
     * InstallAddressSpaceHandler interface.
     */
    if (!(Flags & ACPI_NO_ADDRESS_SPACE_INIT))
    {
        ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
            "[Init] Installing default address space handlers\n"));

        Status = AcpiEvInstallRegionHandlers ();
        if (ACPI_FAILURE (Status))
        {
            return_ACPI_STATUS (Status);
        }
    }

#if (!ACPI_REDUCED_HARDWARE)
    /*
     * Initialize ACPI Event handling (Fixed and General Purpose)
     *
     * Note1: We must have the hardware and events initialized before we can
     * execute any control methods safely. Any control method can require
     * ACPI hardware support, so the hardware must be fully initialized before
     * any method execution!
     *
     * Note2: Fixed events are initialized and enabled here. GPEs are
     * initialized, but cannot be enabled until after the hardware is
     * completely initialized (SCI and GlobalLock activated) and the various
     * initialization control methods are run (_REG, _STA, _INI) on the
     * entire namespace.
     */
    if (!(Flags & ACPI_NO_EVENT_INIT))
    {
        ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
            "[Init] Initializing ACPI events\n"));

        Status = AcpiEvInitializeEvents ();
        if (ACPI_FAILURE (Status))
        {
            return_ACPI_STATUS (Status);
        }
    }

    /*
     * Install the SCI handler and Global Lock handler. This completes the
     * hardware initialization.
     */
    if (!(Flags & ACPI_NO_HANDLER_INIT))
    {
        ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
            "[Init] Installing SCI/GL handlers\n"));

        Status = AcpiEvInstallXruptHandlers ();
        if (ACPI_FAILURE (Status))
        {
            return_ACPI_STATUS (Status);
        }
    }

#endif /* !ACPI_REDUCED_HARDWARE */

    return_ACPI_STATUS (Status);
}

ACPI_EXPORT_SYMBOL_INIT (AcpiEnableSubsystem)


/*******************************************************************************
 *
 * FUNCTION:    AcpiInitializeObjects
 *
 * PARAMETERS:  Flags               - Init/enable Options
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Completes namespace initialization by initializing device
 *              objects and executing AML code for Regions, buffers, etc.
 *
 ******************************************************************************/

ACPI_STATUS
AcpiInitializeObjects (
    UINT32                  Flags)
{
    ACPI_STATUS             Status = AE_OK;


    ACPI_FUNCTION_TRACE (AcpiInitializeObjects);


    /*
     * Run all _REG methods
     *
     * Note: Any objects accessed by the _REG methods will be automatically
     * initialized, even if they contain executable AML (see the call to
     * AcpiNsInitializeObjects below).
     */
    if (!(Flags & ACPI_NO_ADDRESS_SPACE_INIT))
    {
        ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
            "[Init] Executing _REG OpRegion methods\n"));

        Status = AcpiEvInitializeOpRegions ();
        if (ACPI_FAILURE (Status))
        {
            return_ACPI_STATUS (Status);
        }
    }

    /*
     * Execute any module-level code that was detected during the table load
     * phase. Although illegal since ACPI 2.0, there are many machines that
     * contain this type of code. Each block of detected executable AML code
     * outside of any control method is wrapped with a temporary control
     * method object and placed on a global list. The methods on this list
     * are executed below.
     */
    AcpiNsExecModuleCodeList ();

    /*
     * Initialize the objects that remain uninitialized. This runs the
     * executable AML that may be part of the declaration of these objects:
     * OperationRegions, BufferFields, Buffers, and Packages.
     */
    if (!(Flags & ACPI_NO_OBJECT_INIT))
    {
        ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
            "[Init] Completing Initialization of ACPI Objects\n"));

        Status = AcpiNsInitializeObjects ();
        if (ACPI_FAILURE (Status))
        {
            return_ACPI_STATUS (Status);
        }
    }

    /*
     * Initialize all device objects in the namespace. This runs the device
     * _STA and _INI methods.
     */
    if (!(Flags & ACPI_NO_DEVICE_INIT))
    {
        ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
            "[Init] Initializing ACPI Devices\n"));

        Status = AcpiNsInitializeDevices ();
        if (ACPI_FAILURE (Status))
        {
            return_ACPI_STATUS (Status);
        }
    }

    /*
     * Empty the caches (delete the cached objects) on the assumption that
     * the table load filled them up more than they will be at runtime --
     * thus wasting non-paged memory.
     */
    Status = AcpiPurgeCachedObjects ();

    AcpiGbl_StartupFlags |= ACPI_INITIALIZED_OK;
    return_ACPI_STATUS (Status);
}

ACPI_EXPORT_SYMBOL_INIT (AcpiInitializeObjects)