Home | History | Annotate | Line # | Download | only in nouveau
nouveau_connector.c revision 1.1
      1 /*
      2  * Copyright (C) 2008 Maarten Maathuis.
      3  * All Rights Reserved.
      4  *
      5  * Permission is hereby granted, free of charge, to any person obtaining
      6  * a copy of this software and associated documentation files (the
      7  * "Software"), to deal in the Software without restriction, including
      8  * without limitation the rights to use, copy, modify, merge, publish,
      9  * distribute, sublicense, and/or sell copies of the Software, and to
     10  * permit persons to whom the Software is furnished to do so, subject to
     11  * the following conditions:
     12  *
     13  * The above copyright notice and this permission notice (including the
     14  * next paragraph) shall be included in all copies or substantial
     15  * portions of the Software.
     16  *
     17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
     18  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
     19  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
     20  * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
     21  * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
     22  * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
     23  * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
     24  *
     25  */
     26 
     27 #include <acpi/button.h>
     28 
     29 #include <linux/pm_runtime.h>
     30 
     31 #include <drm/drmP.h>
     32 #include <drm/drm_edid.h>
     33 #include <drm/drm_crtc_helper.h>
     34 
     35 #include "nouveau_reg.h"
     36 #include "nouveau_drm.h"
     37 #include "dispnv04/hw.h"
     38 #include "nouveau_acpi.h"
     39 
     40 #include "nouveau_display.h"
     41 #include "nouveau_connector.h"
     42 #include "nouveau_encoder.h"
     43 #include "nouveau_crtc.h"
     44 
     45 #include <subdev/i2c.h>
     46 #include <subdev/gpio.h>
     47 
     48 MODULE_PARM_DESC(tv_disable, "Disable TV-out detection");
     49 static int nouveau_tv_disable = 0;
     50 module_param_named(tv_disable, nouveau_tv_disable, int, 0400);
     51 
     52 MODULE_PARM_DESC(ignorelid, "Ignore ACPI lid status");
     53 static int nouveau_ignorelid = 0;
     54 module_param_named(ignorelid, nouveau_ignorelid, int, 0400);
     55 
     56 MODULE_PARM_DESC(duallink, "Allow dual-link TMDS (default: enabled)");
     57 static int nouveau_duallink = 1;
     58 module_param_named(duallink, nouveau_duallink, int, 0400);
     59 
     60 struct nouveau_encoder *
     61 find_encoder(struct drm_connector *connector, int type)
     62 {
     63 	struct drm_device *dev = connector->dev;
     64 	struct nouveau_encoder *nv_encoder;
     65 	struct drm_mode_object *obj;
     66 	int i, id;
     67 
     68 	for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
     69 		id = connector->encoder_ids[i];
     70 		if (!id)
     71 			break;
     72 
     73 		obj = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_ENCODER);
     74 		if (!obj)
     75 			continue;
     76 		nv_encoder = nouveau_encoder(obj_to_encoder(obj));
     77 
     78 		if (type == DCB_OUTPUT_ANY || nv_encoder->dcb->type == type)
     79 			return nv_encoder;
     80 	}
     81 
     82 	return NULL;
     83 }
     84 
     85 struct nouveau_connector *
     86 nouveau_encoder_connector_get(struct nouveau_encoder *encoder)
     87 {
     88 	struct drm_device *dev = to_drm_encoder(encoder)->dev;
     89 	struct drm_connector *drm_connector;
     90 
     91 	list_for_each_entry(drm_connector, &dev->mode_config.connector_list, head) {
     92 		if (drm_connector->encoder == to_drm_encoder(encoder))
     93 			return nouveau_connector(drm_connector);
     94 	}
     95 
     96 	return NULL;
     97 }
     98 
     99 static void
    100 nouveau_connector_destroy(struct drm_connector *connector)
    101 {
    102 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
    103 	nouveau_event_ref(NULL, &nv_connector->hpd_func);
    104 	kfree(nv_connector->edid);
    105 	drm_sysfs_connector_remove(connector);
    106 	drm_connector_cleanup(connector);
    107 	kfree(connector);
    108 }
    109 
    110 static struct nouveau_i2c_port *
    111 nouveau_connector_ddc_detect(struct drm_connector *connector,
    112 			     struct nouveau_encoder **pnv_encoder)
    113 {
    114 	struct drm_device *dev = connector->dev;
    115 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
    116 	struct nouveau_drm *drm = nouveau_drm(dev);
    117 	struct nouveau_gpio *gpio = nouveau_gpio(drm->device);
    118 	struct nouveau_i2c_port *port = NULL;
    119 	int i, panel = -ENODEV;
    120 
    121 	/* eDP panels need powering on by us (if the VBIOS doesn't default it
    122 	 * to on) before doing any AUX channel transactions.  LVDS panel power
    123 	 * is handled by the SOR itself, and not required for LVDS DDC.
    124 	 */
    125 	if (nv_connector->type == DCB_CONNECTOR_eDP) {
    126 		panel = gpio->get(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff);
    127 		if (panel == 0) {
    128 			gpio->set(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff, 1);
    129 			msleep(300);
    130 		}
    131 	}
    132 
    133 	for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
    134 		struct nouveau_encoder *nv_encoder;
    135 		struct drm_mode_object *obj;
    136 		int id;
    137 
    138 		id = connector->encoder_ids[i];
    139 		if (!id)
    140 			break;
    141 
    142 		obj = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_ENCODER);
    143 		if (!obj)
    144 			continue;
    145 		nv_encoder = nouveau_encoder(obj_to_encoder(obj));
    146 
    147 		port = nv_encoder->i2c;
    148 		if (port && nv_probe_i2c(port, 0x50)) {
    149 			*pnv_encoder = nv_encoder;
    150 			break;
    151 		}
    152 
    153 		port = NULL;
    154 	}
    155 
    156 	/* eDP panel not detected, restore panel power GPIO to previous
    157 	 * state to avoid confusing the SOR for other output types.
    158 	 */
    159 	if (!port && panel == 0)
    160 		gpio->set(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff, panel);
    161 
    162 	return port;
    163 }
    164 
    165 static struct nouveau_encoder *
    166 nouveau_connector_of_detect(struct drm_connector *connector)
    167 {
    168 #ifdef __powerpc__
    169 	struct drm_device *dev = connector->dev;
    170 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
    171 	struct nouveau_encoder *nv_encoder;
    172 	struct device_node *cn, *dn = pci_device_to_OF_node(dev->pdev);
    173 
    174 	if (!dn ||
    175 	    !((nv_encoder = find_encoder(connector, DCB_OUTPUT_TMDS)) ||
    176 	      (nv_encoder = find_encoder(connector, DCB_OUTPUT_ANALOG))))
    177 		return NULL;
    178 
    179 	for_each_child_of_node(dn, cn) {
    180 		const char *name = of_get_property(cn, "name", NULL);
    181 		const void *edid = of_get_property(cn, "EDID", NULL);
    182 		int idx = name ? name[strlen(name) - 1] - 'A' : 0;
    183 
    184 		if (nv_encoder->dcb->i2c_index == idx && edid) {
    185 			nv_connector->edid =
    186 				kmemdup(edid, EDID_LENGTH, GFP_KERNEL);
    187 			of_node_put(cn);
    188 			return nv_encoder;
    189 		}
    190 	}
    191 #endif
    192 	return NULL;
    193 }
    194 
    195 static void
    196 nouveau_connector_set_encoder(struct drm_connector *connector,
    197 			      struct nouveau_encoder *nv_encoder)
    198 {
    199 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
    200 	struct nouveau_drm *drm = nouveau_drm(connector->dev);
    201 	struct drm_device *dev = connector->dev;
    202 
    203 	if (nv_connector->detected_encoder == nv_encoder)
    204 		return;
    205 	nv_connector->detected_encoder = nv_encoder;
    206 
    207 	if (nv_device(drm->device)->card_type >= NV_50) {
    208 		connector->interlace_allowed = true;
    209 		connector->doublescan_allowed = true;
    210 	} else
    211 	if (nv_encoder->dcb->type == DCB_OUTPUT_LVDS ||
    212 	    nv_encoder->dcb->type == DCB_OUTPUT_TMDS) {
    213 		connector->doublescan_allowed = false;
    214 		connector->interlace_allowed = false;
    215 	} else {
    216 		connector->doublescan_allowed = true;
    217 		if (nv_device(drm->device)->card_type == NV_20 ||
    218 		    ((nv_device(drm->device)->card_type == NV_10 ||
    219 		      nv_device(drm->device)->card_type == NV_11) &&
    220 		     (dev->pdev->device & 0x0ff0) != 0x0100 &&
    221 		     (dev->pdev->device & 0x0ff0) != 0x0150))
    222 			/* HW is broken */
    223 			connector->interlace_allowed = false;
    224 		else
    225 			connector->interlace_allowed = true;
    226 	}
    227 
    228 	if (nv_connector->type == DCB_CONNECTOR_DVI_I) {
    229 		drm_object_property_set_value(&connector->base,
    230 			dev->mode_config.dvi_i_subconnector_property,
    231 			nv_encoder->dcb->type == DCB_OUTPUT_TMDS ?
    232 			DRM_MODE_SUBCONNECTOR_DVID :
    233 			DRM_MODE_SUBCONNECTOR_DVIA);
    234 	}
    235 }
    236 
    237 static enum drm_connector_status
    238 nouveau_connector_detect(struct drm_connector *connector, bool force)
    239 {
    240 	struct drm_device *dev = connector->dev;
    241 	struct nouveau_drm *drm = nouveau_drm(dev);
    242 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
    243 	struct nouveau_encoder *nv_encoder = NULL;
    244 	struct nouveau_encoder *nv_partner;
    245 	struct nouveau_i2c_port *i2c;
    246 	int type;
    247 	int ret;
    248 	enum drm_connector_status conn_status = connector_status_disconnected;
    249 
    250 	/* Cleanup the previous EDID block. */
    251 	if (nv_connector->edid) {
    252 		drm_mode_connector_update_edid_property(connector, NULL);
    253 		kfree(nv_connector->edid);
    254 		nv_connector->edid = NULL;
    255 	}
    256 
    257 	ret = pm_runtime_get_sync(connector->dev->dev);
    258 	if (ret < 0 && ret != -EACCES)
    259 		return conn_status;
    260 
    261 	i2c = nouveau_connector_ddc_detect(connector, &nv_encoder);
    262 	if (i2c) {
    263 		nv_connector->edid = drm_get_edid(connector, &i2c->adapter);
    264 		drm_mode_connector_update_edid_property(connector,
    265 							nv_connector->edid);
    266 		if (!nv_connector->edid) {
    267 			NV_ERROR(drm, "DDC responded, but no EDID for %s\n",
    268 				 drm_get_connector_name(connector));
    269 			goto detect_analog;
    270 		}
    271 
    272 		if (nv_encoder->dcb->type == DCB_OUTPUT_DP &&
    273 		    !nouveau_dp_detect(to_drm_encoder(nv_encoder))) {
    274 			NV_ERROR(drm, "Detected %s, but failed init\n",
    275 				 drm_get_connector_name(connector));
    276 			conn_status = connector_status_disconnected;
    277 			goto out;
    278 		}
    279 
    280 		/* Override encoder type for DVI-I based on whether EDID
    281 		 * says the display is digital or analog, both use the
    282 		 * same i2c channel so the value returned from ddc_detect
    283 		 * isn't necessarily correct.
    284 		 */
    285 		nv_partner = NULL;
    286 		if (nv_encoder->dcb->type == DCB_OUTPUT_TMDS)
    287 			nv_partner = find_encoder(connector, DCB_OUTPUT_ANALOG);
    288 		if (nv_encoder->dcb->type == DCB_OUTPUT_ANALOG)
    289 			nv_partner = find_encoder(connector, DCB_OUTPUT_TMDS);
    290 
    291 		if (nv_partner && ((nv_encoder->dcb->type == DCB_OUTPUT_ANALOG &&
    292 				    nv_partner->dcb->type == DCB_OUTPUT_TMDS) ||
    293 				   (nv_encoder->dcb->type == DCB_OUTPUT_TMDS &&
    294 				    nv_partner->dcb->type == DCB_OUTPUT_ANALOG))) {
    295 			if (nv_connector->edid->input & DRM_EDID_INPUT_DIGITAL)
    296 				type = DCB_OUTPUT_TMDS;
    297 			else
    298 				type = DCB_OUTPUT_ANALOG;
    299 
    300 			nv_encoder = find_encoder(connector, type);
    301 		}
    302 
    303 		nouveau_connector_set_encoder(connector, nv_encoder);
    304 		conn_status = connector_status_connected;
    305 		goto out;
    306 	}
    307 
    308 	nv_encoder = nouveau_connector_of_detect(connector);
    309 	if (nv_encoder) {
    310 		nouveau_connector_set_encoder(connector, nv_encoder);
    311 		conn_status = connector_status_connected;
    312 		goto out;
    313 	}
    314 
    315 detect_analog:
    316 	nv_encoder = find_encoder(connector, DCB_OUTPUT_ANALOG);
    317 	if (!nv_encoder && !nouveau_tv_disable)
    318 		nv_encoder = find_encoder(connector, DCB_OUTPUT_TV);
    319 	if (nv_encoder && force) {
    320 		struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
    321 		struct drm_encoder_helper_funcs *helper =
    322 						encoder->helper_private;
    323 
    324 		if (helper->detect(encoder, connector) ==
    325 						connector_status_connected) {
    326 			nouveau_connector_set_encoder(connector, nv_encoder);
    327 			conn_status = connector_status_connected;
    328 			goto out;
    329 		}
    330 
    331 	}
    332 
    333  out:
    334 
    335 	pm_runtime_mark_last_busy(connector->dev->dev);
    336 	pm_runtime_put_autosuspend(connector->dev->dev);
    337 
    338 	return conn_status;
    339 }
    340 
    341 static enum drm_connector_status
    342 nouveau_connector_detect_lvds(struct drm_connector *connector, bool force)
    343 {
    344 	struct drm_device *dev = connector->dev;
    345 	struct nouveau_drm *drm = nouveau_drm(dev);
    346 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
    347 	struct nouveau_encoder *nv_encoder = NULL;
    348 	enum drm_connector_status status = connector_status_disconnected;
    349 
    350 	/* Cleanup the previous EDID block. */
    351 	if (nv_connector->edid) {
    352 		drm_mode_connector_update_edid_property(connector, NULL);
    353 		kfree(nv_connector->edid);
    354 		nv_connector->edid = NULL;
    355 	}
    356 
    357 	nv_encoder = find_encoder(connector, DCB_OUTPUT_LVDS);
    358 	if (!nv_encoder)
    359 		return connector_status_disconnected;
    360 
    361 	/* Try retrieving EDID via DDC */
    362 	if (!drm->vbios.fp_no_ddc) {
    363 		status = nouveau_connector_detect(connector, force);
    364 		if (status == connector_status_connected)
    365 			goto out;
    366 	}
    367 
    368 	/* On some laptops (Sony, i'm looking at you) there appears to
    369 	 * be no direct way of accessing the panel's EDID.  The only
    370 	 * option available to us appears to be to ask ACPI for help..
    371 	 *
    372 	 * It's important this check's before trying straps, one of the
    373 	 * said manufacturer's laptops are configured in such a way
    374 	 * the nouveau decides an entry in the VBIOS FP mode table is
    375 	 * valid - it's not (rh#613284)
    376 	 */
    377 	if (nv_encoder->dcb->lvdsconf.use_acpi_for_edid) {
    378 		if ((nv_connector->edid = nouveau_acpi_edid(dev, connector))) {
    379 			status = connector_status_connected;
    380 			goto out;
    381 		}
    382 	}
    383 
    384 	/* If no EDID found above, and the VBIOS indicates a hardcoded
    385 	 * modeline is avalilable for the panel, set it as the panel's
    386 	 * native mode and exit.
    387 	 */
    388 	if (nouveau_bios_fp_mode(dev, NULL) && (drm->vbios.fp_no_ddc ||
    389 	    nv_encoder->dcb->lvdsconf.use_straps_for_mode)) {
    390 		status = connector_status_connected;
    391 		goto out;
    392 	}
    393 
    394 	/* Still nothing, some VBIOS images have a hardcoded EDID block
    395 	 * stored for the panel stored in them.
    396 	 */
    397 	if (!drm->vbios.fp_no_ddc) {
    398 		struct edid *edid =
    399 			(struct edid *)nouveau_bios_embedded_edid(dev);
    400 		if (edid) {
    401 			nv_connector->edid =
    402 					kmemdup(edid, EDID_LENGTH, GFP_KERNEL);
    403 			if (nv_connector->edid)
    404 				status = connector_status_connected;
    405 		}
    406 	}
    407 
    408 out:
    409 #if defined(CONFIG_ACPI_BUTTON) || \
    410 	(defined(CONFIG_ACPI_BUTTON_MODULE) && defined(MODULE))
    411 	if (status == connector_status_connected &&
    412 	    !nouveau_ignorelid && !acpi_lid_open())
    413 		status = connector_status_unknown;
    414 #endif
    415 
    416 	drm_mode_connector_update_edid_property(connector, nv_connector->edid);
    417 	nouveau_connector_set_encoder(connector, nv_encoder);
    418 	return status;
    419 }
    420 
    421 static void
    422 nouveau_connector_force(struct drm_connector *connector)
    423 {
    424 	struct nouveau_drm *drm = nouveau_drm(connector->dev);
    425 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
    426 	struct nouveau_encoder *nv_encoder;
    427 	int type;
    428 
    429 	if (nv_connector->type == DCB_CONNECTOR_DVI_I) {
    430 		if (connector->force == DRM_FORCE_ON_DIGITAL)
    431 			type = DCB_OUTPUT_TMDS;
    432 		else
    433 			type = DCB_OUTPUT_ANALOG;
    434 	} else
    435 		type = DCB_OUTPUT_ANY;
    436 
    437 	nv_encoder = find_encoder(connector, type);
    438 	if (!nv_encoder) {
    439 		NV_ERROR(drm, "can't find encoder to force %s on!\n",
    440 			 drm_get_connector_name(connector));
    441 		connector->status = connector_status_disconnected;
    442 		return;
    443 	}
    444 
    445 	nouveau_connector_set_encoder(connector, nv_encoder);
    446 }
    447 
    448 static int
    449 nouveau_connector_set_property(struct drm_connector *connector,
    450 			       struct drm_property *property, uint64_t value)
    451 {
    452 	struct nouveau_display *disp = nouveau_display(connector->dev);
    453 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
    454 	struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
    455 	struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
    456 	struct drm_device *dev = connector->dev;
    457 	struct nouveau_crtc *nv_crtc;
    458 	int ret;
    459 
    460 	nv_crtc = NULL;
    461 	if (connector->encoder && connector->encoder->crtc)
    462 		nv_crtc = nouveau_crtc(connector->encoder->crtc);
    463 
    464 	/* Scaling mode */
    465 	if (property == dev->mode_config.scaling_mode_property) {
    466 		bool modeset = false;
    467 
    468 		switch (value) {
    469 		case DRM_MODE_SCALE_NONE:
    470 		case DRM_MODE_SCALE_FULLSCREEN:
    471 		case DRM_MODE_SCALE_CENTER:
    472 		case DRM_MODE_SCALE_ASPECT:
    473 			break;
    474 		default:
    475 			return -EINVAL;
    476 		}
    477 
    478 		/* LVDS always needs gpu scaling */
    479 		if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS &&
    480 		    value == DRM_MODE_SCALE_NONE)
    481 			return -EINVAL;
    482 
    483 		/* Changing between GPU and panel scaling requires a full
    484 		 * modeset
    485 		 */
    486 		if ((nv_connector->scaling_mode == DRM_MODE_SCALE_NONE) ||
    487 		    (value == DRM_MODE_SCALE_NONE))
    488 			modeset = true;
    489 		nv_connector->scaling_mode = value;
    490 
    491 		if (!nv_crtc)
    492 			return 0;
    493 
    494 		if (modeset || !nv_crtc->set_scale) {
    495 			ret = drm_crtc_helper_set_mode(&nv_crtc->base,
    496 							&nv_crtc->base.mode,
    497 							nv_crtc->base.x,
    498 							nv_crtc->base.y, NULL);
    499 			if (!ret)
    500 				return -EINVAL;
    501 		} else {
    502 			ret = nv_crtc->set_scale(nv_crtc, true);
    503 			if (ret)
    504 				return ret;
    505 		}
    506 
    507 		return 0;
    508 	}
    509 
    510 	/* Underscan */
    511 	if (property == disp->underscan_property) {
    512 		if (nv_connector->underscan != value) {
    513 			nv_connector->underscan = value;
    514 			if (!nv_crtc || !nv_crtc->set_scale)
    515 				return 0;
    516 
    517 			return nv_crtc->set_scale(nv_crtc, true);
    518 		}
    519 
    520 		return 0;
    521 	}
    522 
    523 	if (property == disp->underscan_hborder_property) {
    524 		if (nv_connector->underscan_hborder != value) {
    525 			nv_connector->underscan_hborder = value;
    526 			if (!nv_crtc || !nv_crtc->set_scale)
    527 				return 0;
    528 
    529 			return nv_crtc->set_scale(nv_crtc, true);
    530 		}
    531 
    532 		return 0;
    533 	}
    534 
    535 	if (property == disp->underscan_vborder_property) {
    536 		if (nv_connector->underscan_vborder != value) {
    537 			nv_connector->underscan_vborder = value;
    538 			if (!nv_crtc || !nv_crtc->set_scale)
    539 				return 0;
    540 
    541 			return nv_crtc->set_scale(nv_crtc, true);
    542 		}
    543 
    544 		return 0;
    545 	}
    546 
    547 	/* Dithering */
    548 	if (property == disp->dithering_mode) {
    549 		nv_connector->dithering_mode = value;
    550 		if (!nv_crtc || !nv_crtc->set_dither)
    551 			return 0;
    552 
    553 		return nv_crtc->set_dither(nv_crtc, true);
    554 	}
    555 
    556 	if (property == disp->dithering_depth) {
    557 		nv_connector->dithering_depth = value;
    558 		if (!nv_crtc || !nv_crtc->set_dither)
    559 			return 0;
    560 
    561 		return nv_crtc->set_dither(nv_crtc, true);
    562 	}
    563 
    564 	if (nv_crtc && nv_crtc->set_color_vibrance) {
    565 		/* Hue */
    566 		if (property == disp->vibrant_hue_property) {
    567 			nv_crtc->vibrant_hue = value - 90;
    568 			return nv_crtc->set_color_vibrance(nv_crtc, true);
    569 		}
    570 		/* Saturation */
    571 		if (property == disp->color_vibrance_property) {
    572 			nv_crtc->color_vibrance = value - 100;
    573 			return nv_crtc->set_color_vibrance(nv_crtc, true);
    574 		}
    575 	}
    576 
    577 	if (nv_encoder && nv_encoder->dcb->type == DCB_OUTPUT_TV)
    578 		return get_slave_funcs(encoder)->set_property(
    579 			encoder, connector, property, value);
    580 
    581 	return -EINVAL;
    582 }
    583 
    584 static struct drm_display_mode *
    585 nouveau_connector_native_mode(struct drm_connector *connector)
    586 {
    587 	struct drm_connector_helper_funcs *helper = connector->helper_private;
    588 	struct nouveau_drm *drm = nouveau_drm(connector->dev);
    589 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
    590 	struct drm_device *dev = connector->dev;
    591 	struct drm_display_mode *mode, *largest = NULL;
    592 	int high_w = 0, high_h = 0, high_v = 0;
    593 
    594 	list_for_each_entry(mode, &nv_connector->base.probed_modes, head) {
    595 		mode->vrefresh = drm_mode_vrefresh(mode);
    596 		if (helper->mode_valid(connector, mode) != MODE_OK ||
    597 		    (mode->flags & DRM_MODE_FLAG_INTERLACE))
    598 			continue;
    599 
    600 		/* Use preferred mode if there is one.. */
    601 		if (mode->type & DRM_MODE_TYPE_PREFERRED) {
    602 			NV_DEBUG(drm, "native mode from preferred\n");
    603 			return drm_mode_duplicate(dev, mode);
    604 		}
    605 
    606 		/* Otherwise, take the resolution with the largest width, then
    607 		 * height, then vertical refresh
    608 		 */
    609 		if (mode->hdisplay < high_w)
    610 			continue;
    611 
    612 		if (mode->hdisplay == high_w && mode->vdisplay < high_h)
    613 			continue;
    614 
    615 		if (mode->hdisplay == high_w && mode->vdisplay == high_h &&
    616 		    mode->vrefresh < high_v)
    617 			continue;
    618 
    619 		high_w = mode->hdisplay;
    620 		high_h = mode->vdisplay;
    621 		high_v = mode->vrefresh;
    622 		largest = mode;
    623 	}
    624 
    625 	NV_DEBUG(drm, "native mode from largest: %dx%d@%d\n",
    626 		      high_w, high_h, high_v);
    627 	return largest ? drm_mode_duplicate(dev, largest) : NULL;
    628 }
    629 
    630 struct moderec {
    631 	int hdisplay;
    632 	int vdisplay;
    633 };
    634 
    635 static struct moderec scaler_modes[] = {
    636 	{ 1920, 1200 },
    637 	{ 1920, 1080 },
    638 	{ 1680, 1050 },
    639 	{ 1600, 1200 },
    640 	{ 1400, 1050 },
    641 	{ 1280, 1024 },
    642 	{ 1280, 960 },
    643 	{ 1152, 864 },
    644 	{ 1024, 768 },
    645 	{ 800, 600 },
    646 	{ 720, 400 },
    647 	{ 640, 480 },
    648 	{ 640, 400 },
    649 	{ 640, 350 },
    650 	{}
    651 };
    652 
    653 static int
    654 nouveau_connector_scaler_modes_add(struct drm_connector *connector)
    655 {
    656 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
    657 	struct drm_display_mode *native = nv_connector->native_mode, *m;
    658 	struct drm_device *dev = connector->dev;
    659 	struct moderec *mode = &scaler_modes[0];
    660 	int modes = 0;
    661 
    662 	if (!native)
    663 		return 0;
    664 
    665 	while (mode->hdisplay) {
    666 		if (mode->hdisplay <= native->hdisplay &&
    667 		    mode->vdisplay <= native->vdisplay) {
    668 			m = drm_cvt_mode(dev, mode->hdisplay, mode->vdisplay,
    669 					 drm_mode_vrefresh(native), false,
    670 					 false, false);
    671 			if (!m)
    672 				continue;
    673 
    674 			m->type |= DRM_MODE_TYPE_DRIVER;
    675 
    676 			drm_mode_probed_add(connector, m);
    677 			modes++;
    678 		}
    679 
    680 		mode++;
    681 	}
    682 
    683 	return modes;
    684 }
    685 
    686 static void
    687 nouveau_connector_detect_depth(struct drm_connector *connector)
    688 {
    689 	struct nouveau_drm *drm = nouveau_drm(connector->dev);
    690 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
    691 	struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
    692 	struct nvbios *bios = &drm->vbios;
    693 	struct drm_display_mode *mode = nv_connector->native_mode;
    694 	bool duallink;
    695 
    696 	/* if the edid is feeling nice enough to provide this info, use it */
    697 	if (nv_connector->edid && connector->display_info.bpc)
    698 		return;
    699 
    700 	/* EDID 1.4 is *supposed* to be supported on eDP, but, Apple... */
    701 	if (nv_connector->type == DCB_CONNECTOR_eDP) {
    702 		connector->display_info.bpc = 6;
    703 		return;
    704 	}
    705 
    706 	/* we're out of options unless we're LVDS, default to 8bpc */
    707 	if (nv_encoder->dcb->type != DCB_OUTPUT_LVDS) {
    708 		connector->display_info.bpc = 8;
    709 		return;
    710 	}
    711 
    712 	connector->display_info.bpc = 6;
    713 
    714 	/* LVDS: panel straps */
    715 	if (bios->fp_no_ddc) {
    716 		if (bios->fp.if_is_24bit)
    717 			connector->display_info.bpc = 8;
    718 		return;
    719 	}
    720 
    721 	/* LVDS: DDC panel, need to first determine the number of links to
    722 	 * know which if_is_24bit flag to check...
    723 	 */
    724 	if (nv_connector->edid &&
    725 	    nv_connector->type == DCB_CONNECTOR_LVDS_SPWG)
    726 		duallink = ((u8 *)nv_connector->edid)[121] == 2;
    727 	else
    728 		duallink = mode->clock >= bios->fp.duallink_transition_clk;
    729 
    730 	if ((!duallink && (bios->fp.strapless_is_24bit & 1)) ||
    731 	    ( duallink && (bios->fp.strapless_is_24bit & 2)))
    732 		connector->display_info.bpc = 8;
    733 }
    734 
    735 static int
    736 nouveau_connector_get_modes(struct drm_connector *connector)
    737 {
    738 	struct drm_device *dev = connector->dev;
    739 	struct nouveau_drm *drm = nouveau_drm(dev);
    740 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
    741 	struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
    742 	struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
    743 	int ret = 0;
    744 
    745 	/* destroy the native mode, the attached monitor could have changed.
    746 	 */
    747 	if (nv_connector->native_mode) {
    748 		drm_mode_destroy(dev, nv_connector->native_mode);
    749 		nv_connector->native_mode = NULL;
    750 	}
    751 
    752 	if (nv_connector->edid)
    753 		ret = drm_add_edid_modes(connector, nv_connector->edid);
    754 	else
    755 	if (nv_encoder->dcb->type == DCB_OUTPUT_LVDS &&
    756 	    (nv_encoder->dcb->lvdsconf.use_straps_for_mode ||
    757 	     drm->vbios.fp_no_ddc) && nouveau_bios_fp_mode(dev, NULL)) {
    758 		struct drm_display_mode mode;
    759 
    760 		nouveau_bios_fp_mode(dev, &mode);
    761 		nv_connector->native_mode = drm_mode_duplicate(dev, &mode);
    762 	}
    763 
    764 	/* Determine display colour depth for everything except LVDS now,
    765 	 * DP requires this before mode_valid() is called.
    766 	 */
    767 	if (connector->connector_type != DRM_MODE_CONNECTOR_LVDS)
    768 		nouveau_connector_detect_depth(connector);
    769 
    770 	/* Find the native mode if this is a digital panel, if we didn't
    771 	 * find any modes through DDC previously add the native mode to
    772 	 * the list of modes.
    773 	 */
    774 	if (!nv_connector->native_mode)
    775 		nv_connector->native_mode =
    776 			nouveau_connector_native_mode(connector);
    777 	if (ret == 0 && nv_connector->native_mode) {
    778 		struct drm_display_mode *mode;
    779 
    780 		mode = drm_mode_duplicate(dev, nv_connector->native_mode);
    781 		drm_mode_probed_add(connector, mode);
    782 		ret = 1;
    783 	}
    784 
    785 	/* Determine LVDS colour depth, must happen after determining
    786 	 * "native" mode as some VBIOS tables require us to use the
    787 	 * pixel clock as part of the lookup...
    788 	 */
    789 	if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)
    790 		nouveau_connector_detect_depth(connector);
    791 
    792 	if (nv_encoder->dcb->type == DCB_OUTPUT_TV)
    793 		ret = get_slave_funcs(encoder)->get_modes(encoder, connector);
    794 
    795 	if (nv_connector->type == DCB_CONNECTOR_LVDS ||
    796 	    nv_connector->type == DCB_CONNECTOR_LVDS_SPWG ||
    797 	    nv_connector->type == DCB_CONNECTOR_eDP)
    798 		ret += nouveau_connector_scaler_modes_add(connector);
    799 
    800 	return ret;
    801 }
    802 
    803 static unsigned
    804 get_tmds_link_bandwidth(struct drm_connector *connector)
    805 {
    806 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
    807 	struct nouveau_drm *drm = nouveau_drm(connector->dev);
    808 	struct dcb_output *dcb = nv_connector->detected_encoder->dcb;
    809 
    810 	if (dcb->location != DCB_LOC_ON_CHIP ||
    811 	    nv_device(drm->device)->chipset >= 0x46)
    812 		return 165000;
    813 	else if (nv_device(drm->device)->chipset >= 0x40)
    814 		return 155000;
    815 	else if (nv_device(drm->device)->chipset >= 0x18)
    816 		return 135000;
    817 	else
    818 		return 112000;
    819 }
    820 
    821 static int
    822 nouveau_connector_mode_valid(struct drm_connector *connector,
    823 			     struct drm_display_mode *mode)
    824 {
    825 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
    826 	struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
    827 	struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
    828 	unsigned min_clock = 25000, max_clock = min_clock;
    829 	unsigned clock = mode->clock;
    830 
    831 	switch (nv_encoder->dcb->type) {
    832 	case DCB_OUTPUT_LVDS:
    833 		if (nv_connector->native_mode &&
    834 		    (mode->hdisplay > nv_connector->native_mode->hdisplay ||
    835 		     mode->vdisplay > nv_connector->native_mode->vdisplay))
    836 			return MODE_PANEL;
    837 
    838 		min_clock = 0;
    839 		max_clock = 400000;
    840 		break;
    841 	case DCB_OUTPUT_TMDS:
    842 		max_clock = get_tmds_link_bandwidth(connector);
    843 		if (nouveau_duallink && nv_encoder->dcb->duallink_possible)
    844 			max_clock *= 2;
    845 		break;
    846 	case DCB_OUTPUT_ANALOG:
    847 		max_clock = nv_encoder->dcb->crtconf.maxfreq;
    848 		if (!max_clock)
    849 			max_clock = 350000;
    850 		break;
    851 	case DCB_OUTPUT_TV:
    852 		return get_slave_funcs(encoder)->mode_valid(encoder, mode);
    853 	case DCB_OUTPUT_DP:
    854 		max_clock  = nv_encoder->dp.link_nr;
    855 		max_clock *= nv_encoder->dp.link_bw;
    856 		clock = clock * (connector->display_info.bpc * 3) / 10;
    857 		break;
    858 	default:
    859 		BUG_ON(1);
    860 		return MODE_BAD;
    861 	}
    862 
    863 	if (clock < min_clock)
    864 		return MODE_CLOCK_LOW;
    865 
    866 	if (clock > max_clock)
    867 		return MODE_CLOCK_HIGH;
    868 
    869 	return MODE_OK;
    870 }
    871 
    872 static struct drm_encoder *
    873 nouveau_connector_best_encoder(struct drm_connector *connector)
    874 {
    875 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
    876 
    877 	if (nv_connector->detected_encoder)
    878 		return to_drm_encoder(nv_connector->detected_encoder);
    879 
    880 	return NULL;
    881 }
    882 
    883 static const struct drm_connector_helper_funcs
    884 nouveau_connector_helper_funcs = {
    885 	.get_modes = nouveau_connector_get_modes,
    886 	.mode_valid = nouveau_connector_mode_valid,
    887 	.best_encoder = nouveau_connector_best_encoder,
    888 };
    889 
    890 static const struct drm_connector_funcs
    891 nouveau_connector_funcs = {
    892 	.dpms = drm_helper_connector_dpms,
    893 	.save = NULL,
    894 	.restore = NULL,
    895 	.detect = nouveau_connector_detect,
    896 	.destroy = nouveau_connector_destroy,
    897 	.fill_modes = drm_helper_probe_single_connector_modes,
    898 	.set_property = nouveau_connector_set_property,
    899 	.force = nouveau_connector_force
    900 };
    901 
    902 static const struct drm_connector_funcs
    903 nouveau_connector_funcs_lvds = {
    904 	.dpms = drm_helper_connector_dpms,
    905 	.save = NULL,
    906 	.restore = NULL,
    907 	.detect = nouveau_connector_detect_lvds,
    908 	.destroy = nouveau_connector_destroy,
    909 	.fill_modes = drm_helper_probe_single_connector_modes,
    910 	.set_property = nouveau_connector_set_property,
    911 	.force = nouveau_connector_force
    912 };
    913 
    914 static void
    915 nouveau_connector_hotplug_work(struct work_struct *work)
    916 {
    917 	struct nouveau_connector *nv_connector =
    918 		container_of(work, struct nouveau_connector, hpd_work);
    919 	struct drm_connector *connector = &nv_connector->base;
    920 	struct drm_device *dev = connector->dev;
    921 	struct nouveau_drm *drm = nouveau_drm(dev);
    922 	struct nouveau_gpio *gpio = nouveau_gpio(drm->device);
    923 	bool plugged = gpio->get(gpio, 0, nv_connector->hpd.func, 0xff);
    924 
    925 	NV_DEBUG(drm, "%splugged %s\n", plugged ? "" : "un",
    926 		 drm_get_connector_name(connector));
    927 
    928 	if (plugged)
    929 		drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
    930 	else
    931 		drm_helper_connector_dpms(connector, DRM_MODE_DPMS_OFF);
    932 
    933 	drm_helper_hpd_irq_event(dev);
    934 }
    935 
    936 static int
    937 nouveau_connector_hotplug(void *data, int index)
    938 {
    939 	struct nouveau_connector *nv_connector = data;
    940 	schedule_work(&nv_connector->hpd_work);
    941 	return NVKM_EVENT_KEEP;
    942 }
    943 
    944 static int
    945 drm_conntype_from_dcb(enum dcb_connector_type dcb)
    946 {
    947 	switch (dcb) {
    948 	case DCB_CONNECTOR_VGA      : return DRM_MODE_CONNECTOR_VGA;
    949 	case DCB_CONNECTOR_TV_0     :
    950 	case DCB_CONNECTOR_TV_1     :
    951 	case DCB_CONNECTOR_TV_3     : return DRM_MODE_CONNECTOR_TV;
    952 	case DCB_CONNECTOR_DMS59_0  :
    953 	case DCB_CONNECTOR_DMS59_1  :
    954 	case DCB_CONNECTOR_DVI_I    : return DRM_MODE_CONNECTOR_DVII;
    955 	case DCB_CONNECTOR_DVI_D    : return DRM_MODE_CONNECTOR_DVID;
    956 	case DCB_CONNECTOR_LVDS     :
    957 	case DCB_CONNECTOR_LVDS_SPWG: return DRM_MODE_CONNECTOR_LVDS;
    958 	case DCB_CONNECTOR_DMS59_DP0:
    959 	case DCB_CONNECTOR_DMS59_DP1:
    960 	case DCB_CONNECTOR_DP       : return DRM_MODE_CONNECTOR_DisplayPort;
    961 	case DCB_CONNECTOR_eDP      : return DRM_MODE_CONNECTOR_eDP;
    962 	case DCB_CONNECTOR_HDMI_0   :
    963 	case DCB_CONNECTOR_HDMI_1   :
    964 	case DCB_CONNECTOR_HDMI_C   : return DRM_MODE_CONNECTOR_HDMIA;
    965 	default:
    966 		break;
    967 	}
    968 
    969 	return DRM_MODE_CONNECTOR_Unknown;
    970 }
    971 
    972 struct drm_connector *
    973 nouveau_connector_create(struct drm_device *dev, int index)
    974 {
    975 	const struct drm_connector_funcs *funcs = &nouveau_connector_funcs;
    976 	struct nouveau_drm *drm = nouveau_drm(dev);
    977 	struct nouveau_gpio *gpio = nouveau_gpio(drm->device);
    978 	struct nouveau_display *disp = nouveau_display(dev);
    979 	struct nouveau_connector *nv_connector = NULL;
    980 	struct drm_connector *connector;
    981 	int type, ret = 0;
    982 	bool dummy;
    983 
    984 	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
    985 		nv_connector = nouveau_connector(connector);
    986 		if (nv_connector->index == index)
    987 			return connector;
    988 	}
    989 
    990 	nv_connector = kzalloc(sizeof(*nv_connector), GFP_KERNEL);
    991 	if (!nv_connector)
    992 		return ERR_PTR(-ENOMEM);
    993 
    994 	connector = &nv_connector->base;
    995 	INIT_WORK(&nv_connector->hpd_work, nouveau_connector_hotplug_work);
    996 	nv_connector->index = index;
    997 
    998 	/* attempt to parse vbios connector type and hotplug gpio */
    999 	nv_connector->dcb = olddcb_conn(dev, index);
   1000 	if (nv_connector->dcb) {
   1001 		static const u8 hpd[16] = {
   1002 			0xff, 0x07, 0x08, 0xff, 0xff, 0x51, 0x52, 0xff,
   1003 			0xff, 0xff, 0xff, 0xff, 0xff, 0x5e, 0x5f, 0x60,
   1004 		};
   1005 
   1006 		u32 entry = ROM16(nv_connector->dcb[0]);
   1007 		if (olddcb_conntab(dev)[3] >= 4)
   1008 			entry |= (u32)ROM16(nv_connector->dcb[2]) << 16;
   1009 
   1010 		ret = gpio->find(gpio, 0, hpd[ffs((entry & 0x07033000) >> 12)],
   1011 				 DCB_GPIO_UNUSED, &nv_connector->hpd);
   1012 		if (ret)
   1013 			nv_connector->hpd.func = DCB_GPIO_UNUSED;
   1014 
   1015 		if (nv_connector->hpd.func != DCB_GPIO_UNUSED) {
   1016 			nouveau_event_new(gpio->events, nv_connector->hpd.line,
   1017 					  nouveau_connector_hotplug,
   1018 					  nv_connector,
   1019 					 &nv_connector->hpd_func);
   1020 		}
   1021 
   1022 		nv_connector->type = nv_connector->dcb[0];
   1023 		if (drm_conntype_from_dcb(nv_connector->type) ==
   1024 					  DRM_MODE_CONNECTOR_Unknown) {
   1025 			NV_WARN(drm, "unknown connector type %02x\n",
   1026 				nv_connector->type);
   1027 			nv_connector->type = DCB_CONNECTOR_NONE;
   1028 		}
   1029 
   1030 		/* Gigabyte NX85T */
   1031 		if (nv_match_device(dev, 0x0421, 0x1458, 0x344c)) {
   1032 			if (nv_connector->type == DCB_CONNECTOR_HDMI_1)
   1033 				nv_connector->type = DCB_CONNECTOR_DVI_I;
   1034 		}
   1035 
   1036 		/* Gigabyte GV-NX86T512H */
   1037 		if (nv_match_device(dev, 0x0402, 0x1458, 0x3455)) {
   1038 			if (nv_connector->type == DCB_CONNECTOR_HDMI_1)
   1039 				nv_connector->type = DCB_CONNECTOR_DVI_I;
   1040 		}
   1041 	} else {
   1042 		nv_connector->type = DCB_CONNECTOR_NONE;
   1043 		nv_connector->hpd.func = DCB_GPIO_UNUSED;
   1044 	}
   1045 
   1046 	/* no vbios data, or an unknown dcb connector type - attempt to
   1047 	 * figure out something suitable ourselves
   1048 	 */
   1049 	if (nv_connector->type == DCB_CONNECTOR_NONE) {
   1050 		struct nouveau_drm *drm = nouveau_drm(dev);
   1051 		struct dcb_table *dcbt = &drm->vbios.dcb;
   1052 		u32 encoders = 0;
   1053 		int i;
   1054 
   1055 		for (i = 0; i < dcbt->entries; i++) {
   1056 			if (dcbt->entry[i].connector == nv_connector->index)
   1057 				encoders |= (1 << dcbt->entry[i].type);
   1058 		}
   1059 
   1060 		if (encoders & (1 << DCB_OUTPUT_DP)) {
   1061 			if (encoders & (1 << DCB_OUTPUT_TMDS))
   1062 				nv_connector->type = DCB_CONNECTOR_DP;
   1063 			else
   1064 				nv_connector->type = DCB_CONNECTOR_eDP;
   1065 		} else
   1066 		if (encoders & (1 << DCB_OUTPUT_TMDS)) {
   1067 			if (encoders & (1 << DCB_OUTPUT_ANALOG))
   1068 				nv_connector->type = DCB_CONNECTOR_DVI_I;
   1069 			else
   1070 				nv_connector->type = DCB_CONNECTOR_DVI_D;
   1071 		} else
   1072 		if (encoders & (1 << DCB_OUTPUT_ANALOG)) {
   1073 			nv_connector->type = DCB_CONNECTOR_VGA;
   1074 		} else
   1075 		if (encoders & (1 << DCB_OUTPUT_LVDS)) {
   1076 			nv_connector->type = DCB_CONNECTOR_LVDS;
   1077 		} else
   1078 		if (encoders & (1 << DCB_OUTPUT_TV)) {
   1079 			nv_connector->type = DCB_CONNECTOR_TV_0;
   1080 		}
   1081 	}
   1082 
   1083 	type = drm_conntype_from_dcb(nv_connector->type);
   1084 	if (type == DRM_MODE_CONNECTOR_LVDS) {
   1085 		ret = nouveau_bios_parse_lvds_table(dev, 0, &dummy, &dummy);
   1086 		if (ret) {
   1087 			NV_ERROR(drm, "Error parsing LVDS table, disabling\n");
   1088 			kfree(nv_connector);
   1089 			return ERR_PTR(ret);
   1090 		}
   1091 
   1092 		funcs = &nouveau_connector_funcs_lvds;
   1093 	} else {
   1094 		funcs = &nouveau_connector_funcs;
   1095 	}
   1096 
   1097 	/* defaults, will get overridden in detect() */
   1098 	connector->interlace_allowed = false;
   1099 	connector->doublescan_allowed = false;
   1100 
   1101 	drm_connector_init(dev, connector, funcs, type);
   1102 	drm_connector_helper_add(connector, &nouveau_connector_helper_funcs);
   1103 
   1104 	/* Init DVI-I specific properties */
   1105 	if (nv_connector->type == DCB_CONNECTOR_DVI_I)
   1106 		drm_object_attach_property(&connector->base, dev->mode_config.dvi_i_subconnector_property, 0);
   1107 
   1108 	/* Add overscan compensation options to digital outputs */
   1109 	if (disp->underscan_property &&
   1110 	    (type == DRM_MODE_CONNECTOR_DVID ||
   1111 	     type == DRM_MODE_CONNECTOR_DVII ||
   1112 	     type == DRM_MODE_CONNECTOR_HDMIA ||
   1113 	     type == DRM_MODE_CONNECTOR_DisplayPort)) {
   1114 		drm_object_attach_property(&connector->base,
   1115 					      disp->underscan_property,
   1116 					      UNDERSCAN_OFF);
   1117 		drm_object_attach_property(&connector->base,
   1118 					      disp->underscan_hborder_property,
   1119 					      0);
   1120 		drm_object_attach_property(&connector->base,
   1121 					      disp->underscan_vborder_property,
   1122 					      0);
   1123 	}
   1124 
   1125 	/* Add hue and saturation options */
   1126 	if (disp->vibrant_hue_property)
   1127 		drm_object_attach_property(&connector->base,
   1128 					      disp->vibrant_hue_property,
   1129 					      90);
   1130 	if (disp->color_vibrance_property)
   1131 		drm_object_attach_property(&connector->base,
   1132 					      disp->color_vibrance_property,
   1133 					      150);
   1134 
   1135 	switch (nv_connector->type) {
   1136 	case DCB_CONNECTOR_VGA:
   1137 		if (nv_device(drm->device)->card_type >= NV_50) {
   1138 			drm_object_attach_property(&connector->base,
   1139 					dev->mode_config.scaling_mode_property,
   1140 					nv_connector->scaling_mode);
   1141 		}
   1142 		/* fall-through */
   1143 	case DCB_CONNECTOR_TV_0:
   1144 	case DCB_CONNECTOR_TV_1:
   1145 	case DCB_CONNECTOR_TV_3:
   1146 		nv_connector->scaling_mode = DRM_MODE_SCALE_NONE;
   1147 		break;
   1148 	default:
   1149 		nv_connector->scaling_mode = DRM_MODE_SCALE_FULLSCREEN;
   1150 
   1151 		drm_object_attach_property(&connector->base,
   1152 				dev->mode_config.scaling_mode_property,
   1153 				nv_connector->scaling_mode);
   1154 		if (disp->dithering_mode) {
   1155 			nv_connector->dithering_mode = DITHERING_MODE_AUTO;
   1156 			drm_object_attach_property(&connector->base,
   1157 						disp->dithering_mode,
   1158 						nv_connector->dithering_mode);
   1159 		}
   1160 		if (disp->dithering_depth) {
   1161 			nv_connector->dithering_depth = DITHERING_DEPTH_AUTO;
   1162 			drm_object_attach_property(&connector->base,
   1163 						disp->dithering_depth,
   1164 						nv_connector->dithering_depth);
   1165 		}
   1166 		break;
   1167 	}
   1168 
   1169 	connector->polled = DRM_CONNECTOR_POLL_CONNECT;
   1170 	if (nv_connector->hpd.func != DCB_GPIO_UNUSED)
   1171 		connector->polled = DRM_CONNECTOR_POLL_HPD;
   1172 
   1173 	drm_sysfs_connector_add(connector);
   1174 	return connector;
   1175 }
   1176