dwc2.c revision 1.80 1 1.80 riastrad /* $NetBSD: dwc2.c,v 1.80 2022/03/03 06:12:11 riastradh Exp $ */
2 1.1 skrll
3 1.1 skrll /*-
4 1.1 skrll * Copyright (c) 2013 The NetBSD Foundation, Inc.
5 1.1 skrll * All rights reserved.
6 1.1 skrll *
7 1.1 skrll * This code is derived from software contributed to The NetBSD Foundation
8 1.1 skrll * by Nick Hudson
9 1.1 skrll *
10 1.1 skrll * Redistribution and use in source and binary forms, with or without
11 1.1 skrll * modification, are permitted provided that the following conditions
12 1.1 skrll * are met:
13 1.1 skrll * 1. Redistributions of source code must retain the above copyright
14 1.1 skrll * notice, this list of conditions and the following disclaimer.
15 1.1 skrll * 2. Redistributions in binary form must reproduce the above copyright
16 1.1 skrll * notice, this list of conditions and the following disclaimer in the
17 1.1 skrll * documentation and/or other materials provided with the distribution.
18 1.1 skrll *
19 1.1 skrll * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
20 1.1 skrll * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21 1.1 skrll * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22 1.1 skrll * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
23 1.1 skrll * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24 1.1 skrll * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25 1.1 skrll * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 1.1 skrll * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27 1.1 skrll * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28 1.1 skrll * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29 1.1 skrll * POSSIBILITY OF SUCH DAMAGE.
30 1.1 skrll */
31 1.1 skrll
32 1.1 skrll #include <sys/cdefs.h>
33 1.80 riastrad __KERNEL_RCSID(0, "$NetBSD: dwc2.c,v 1.80 2022/03/03 06:12:11 riastradh Exp $");
34 1.1 skrll
35 1.1 skrll #include "opt_usb.h"
36 1.1 skrll
37 1.1 skrll #include <sys/param.h>
38 1.60 skrll
39 1.60 skrll #include <sys/cpu.h>
40 1.60 skrll #include <sys/device.h>
41 1.60 skrll #include <sys/kernel.h>
42 1.1 skrll #include <sys/kmem.h>
43 1.1 skrll #include <sys/proc.h>
44 1.1 skrll #include <sys/queue.h>
45 1.60 skrll #include <sys/select.h>
46 1.62 skrll #include <sys/sysctl.h>
47 1.60 skrll #include <sys/systm.h>
48 1.1 skrll
49 1.1 skrll #include <machine/endian.h>
50 1.1 skrll
51 1.1 skrll #include <dev/usb/usb.h>
52 1.1 skrll #include <dev/usb/usbdi.h>
53 1.1 skrll #include <dev/usb/usbdivar.h>
54 1.1 skrll #include <dev/usb/usb_mem.h>
55 1.42 skrll #include <dev/usb/usbroothub.h>
56 1.1 skrll
57 1.1 skrll #include <dwc2/dwc2.h>
58 1.1 skrll #include <dwc2/dwc2var.h>
59 1.1 skrll
60 1.1 skrll #include "dwc2_core.h"
61 1.1 skrll #include "dwc2_hcd.h"
62 1.1 skrll
63 1.1 skrll #ifdef DWC2_COUNTERS
64 1.1 skrll #define DWC2_EVCNT_ADD(a,b) ((void)((a).ev_count += (b)))
65 1.1 skrll #else
66 1.1 skrll #define DWC2_EVCNT_ADD(a,b) do { } while (/*CONSTCOND*/0)
67 1.1 skrll #endif
68 1.1 skrll #define DWC2_EVCNT_INCR(a) DWC2_EVCNT_ADD((a), 1)
69 1.1 skrll
70 1.1 skrll #ifdef DWC2_DEBUG
71 1.1 skrll #define DPRINTFN(n,fmt,...) do { \
72 1.1 skrll if (dwc2debug >= (n)) { \
73 1.1 skrll printf("%s: " fmt, \
74 1.1 skrll __FUNCTION__,## __VA_ARGS__); \
75 1.1 skrll } \
76 1.1 skrll } while (0)
77 1.1 skrll #define DPRINTF(...) DPRINTFN(1, __VA_ARGS__)
78 1.1 skrll int dwc2debug = 0;
79 1.61 skrll
80 1.61 skrll SYSCTL_SETUP(sysctl_hw_dwc2_setup, "sysctl hw.dwc2 setup")
81 1.61 skrll {
82 1.61 skrll int err;
83 1.61 skrll const struct sysctlnode *rnode;
84 1.61 skrll const struct sysctlnode *cnode;
85 1.61 skrll
86 1.61 skrll err = sysctl_createv(clog, 0, NULL, &rnode,
87 1.61 skrll CTLFLAG_PERMANENT, CTLTYPE_NODE, "dwc2",
88 1.61 skrll SYSCTL_DESCR("dwc2 global controls"),
89 1.61 skrll NULL, 0, NULL, 0, CTL_HW, CTL_CREATE, CTL_EOL);
90 1.61 skrll
91 1.61 skrll if (err)
92 1.61 skrll goto fail;
93 1.61 skrll
94 1.61 skrll /* control debugging printfs */
95 1.61 skrll err = sysctl_createv(clog, 0, &rnode, &cnode,
96 1.61 skrll CTLFLAG_PERMANENT|CTLFLAG_READWRITE, CTLTYPE_INT,
97 1.61 skrll "debug", SYSCTL_DESCR("Enable debugging output"),
98 1.61 skrll NULL, 0, &dwc2debug, sizeof(dwc2debug), CTL_CREATE, CTL_EOL);
99 1.61 skrll if (err)
100 1.61 skrll goto fail;
101 1.61 skrll
102 1.61 skrll return;
103 1.61 skrll fail:
104 1.61 skrll aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err);
105 1.61 skrll }
106 1.1 skrll #else
107 1.1 skrll #define DPRINTF(...) do { } while (0)
108 1.1 skrll #define DPRINTFN(...) do { } while (0)
109 1.1 skrll #endif
110 1.1 skrll
111 1.42 skrll Static usbd_status dwc2_open(struct usbd_pipe *);
112 1.1 skrll Static void dwc2_poll(struct usbd_bus *);
113 1.1 skrll Static void dwc2_softintr(void *);
114 1.1 skrll
115 1.42 skrll Static struct usbd_xfer *
116 1.42 skrll dwc2_allocx(struct usbd_bus *, unsigned int);
117 1.42 skrll Static void dwc2_freex(struct usbd_bus *, struct usbd_xfer *);
118 1.1 skrll Static void dwc2_get_lock(struct usbd_bus *, kmutex_t **);
119 1.67 riastrad Static bool dwc2_dying(struct usbd_bus *);
120 1.42 skrll Static int dwc2_roothub_ctrl(struct usbd_bus *, usb_device_request_t *,
121 1.42 skrll void *, int);
122 1.1 skrll
123 1.42 skrll Static usbd_status dwc2_root_intr_transfer(struct usbd_xfer *);
124 1.42 skrll Static usbd_status dwc2_root_intr_start(struct usbd_xfer *);
125 1.42 skrll Static void dwc2_root_intr_abort(struct usbd_xfer *);
126 1.42 skrll Static void dwc2_root_intr_close(struct usbd_pipe *);
127 1.42 skrll Static void dwc2_root_intr_done(struct usbd_xfer *);
128 1.42 skrll
129 1.42 skrll Static usbd_status dwc2_device_ctrl_transfer(struct usbd_xfer *);
130 1.42 skrll Static usbd_status dwc2_device_ctrl_start(struct usbd_xfer *);
131 1.42 skrll Static void dwc2_device_ctrl_abort(struct usbd_xfer *);
132 1.42 skrll Static void dwc2_device_ctrl_close(struct usbd_pipe *);
133 1.42 skrll Static void dwc2_device_ctrl_done(struct usbd_xfer *);
134 1.42 skrll
135 1.42 skrll Static usbd_status dwc2_device_bulk_transfer(struct usbd_xfer *);
136 1.42 skrll Static void dwc2_device_bulk_abort(struct usbd_xfer *);
137 1.42 skrll Static void dwc2_device_bulk_close(struct usbd_pipe *);
138 1.42 skrll Static void dwc2_device_bulk_done(struct usbd_xfer *);
139 1.42 skrll
140 1.42 skrll Static usbd_status dwc2_device_intr_transfer(struct usbd_xfer *);
141 1.42 skrll Static usbd_status dwc2_device_intr_start(struct usbd_xfer *);
142 1.42 skrll Static void dwc2_device_intr_abort(struct usbd_xfer *);
143 1.42 skrll Static void dwc2_device_intr_close(struct usbd_pipe *);
144 1.42 skrll Static void dwc2_device_intr_done(struct usbd_xfer *);
145 1.42 skrll
146 1.42 skrll Static usbd_status dwc2_device_isoc_transfer(struct usbd_xfer *);
147 1.42 skrll Static void dwc2_device_isoc_abort(struct usbd_xfer *);
148 1.42 skrll Static void dwc2_device_isoc_close(struct usbd_pipe *);
149 1.42 skrll Static void dwc2_device_isoc_done(struct usbd_xfer *);
150 1.1 skrll
151 1.42 skrll Static usbd_status dwc2_device_start(struct usbd_xfer *);
152 1.1 skrll
153 1.42 skrll Static void dwc2_close_pipe(struct usbd_pipe *);
154 1.67 riastrad Static void dwc2_abortx(struct usbd_xfer *);
155 1.1 skrll
156 1.42 skrll Static void dwc2_device_clear_toggle(struct usbd_pipe *);
157 1.42 skrll Static void dwc2_noop(struct usbd_pipe *pipe);
158 1.1 skrll
159 1.1 skrll Static int dwc2_interrupt(struct dwc2_softc *);
160 1.1 skrll Static void dwc2_rhc(void *);
161 1.1 skrll
162 1.7 skrll
163 1.7 skrll static inline void
164 1.7 skrll dwc2_allocate_bus_bandwidth(struct dwc2_hsotg *hsotg, u16 bw,
165 1.42 skrll struct usbd_xfer *xfer)
166 1.7 skrll {
167 1.7 skrll }
168 1.7 skrll
169 1.7 skrll static inline void
170 1.7 skrll dwc2_free_bus_bandwidth(struct dwc2_hsotg *hsotg, u16 bw,
171 1.42 skrll struct usbd_xfer *xfer)
172 1.7 skrll {
173 1.7 skrll }
174 1.7 skrll
175 1.1 skrll Static const struct usbd_bus_methods dwc2_bus_methods = {
176 1.42 skrll .ubm_open = dwc2_open,
177 1.42 skrll .ubm_softint = dwc2_softintr,
178 1.42 skrll .ubm_dopoll = dwc2_poll,
179 1.42 skrll .ubm_allocx = dwc2_allocx,
180 1.42 skrll .ubm_freex = dwc2_freex,
181 1.67 riastrad .ubm_abortx = dwc2_abortx,
182 1.67 riastrad .ubm_dying = dwc2_dying,
183 1.42 skrll .ubm_getlock = dwc2_get_lock,
184 1.42 skrll .ubm_rhctrl = dwc2_roothub_ctrl,
185 1.1 skrll };
186 1.1 skrll
187 1.1 skrll Static const struct usbd_pipe_methods dwc2_root_intr_methods = {
188 1.42 skrll .upm_transfer = dwc2_root_intr_transfer,
189 1.42 skrll .upm_start = dwc2_root_intr_start,
190 1.42 skrll .upm_abort = dwc2_root_intr_abort,
191 1.42 skrll .upm_close = dwc2_root_intr_close,
192 1.42 skrll .upm_cleartoggle = dwc2_noop,
193 1.42 skrll .upm_done = dwc2_root_intr_done,
194 1.1 skrll };
195 1.1 skrll
196 1.1 skrll Static const struct usbd_pipe_methods dwc2_device_ctrl_methods = {
197 1.42 skrll .upm_transfer = dwc2_device_ctrl_transfer,
198 1.42 skrll .upm_start = dwc2_device_ctrl_start,
199 1.42 skrll .upm_abort = dwc2_device_ctrl_abort,
200 1.42 skrll .upm_close = dwc2_device_ctrl_close,
201 1.42 skrll .upm_cleartoggle = dwc2_noop,
202 1.42 skrll .upm_done = dwc2_device_ctrl_done,
203 1.1 skrll };
204 1.1 skrll
205 1.1 skrll Static const struct usbd_pipe_methods dwc2_device_intr_methods = {
206 1.42 skrll .upm_transfer = dwc2_device_intr_transfer,
207 1.42 skrll .upm_start = dwc2_device_intr_start,
208 1.42 skrll .upm_abort = dwc2_device_intr_abort,
209 1.42 skrll .upm_close = dwc2_device_intr_close,
210 1.42 skrll .upm_cleartoggle = dwc2_device_clear_toggle,
211 1.42 skrll .upm_done = dwc2_device_intr_done,
212 1.1 skrll };
213 1.1 skrll
214 1.1 skrll Static const struct usbd_pipe_methods dwc2_device_bulk_methods = {
215 1.42 skrll .upm_transfer = dwc2_device_bulk_transfer,
216 1.42 skrll .upm_abort = dwc2_device_bulk_abort,
217 1.42 skrll .upm_close = dwc2_device_bulk_close,
218 1.42 skrll .upm_cleartoggle = dwc2_device_clear_toggle,
219 1.42 skrll .upm_done = dwc2_device_bulk_done,
220 1.1 skrll };
221 1.1 skrll
222 1.1 skrll Static const struct usbd_pipe_methods dwc2_device_isoc_methods = {
223 1.42 skrll .upm_transfer = dwc2_device_isoc_transfer,
224 1.42 skrll .upm_abort = dwc2_device_isoc_abort,
225 1.42 skrll .upm_close = dwc2_device_isoc_close,
226 1.42 skrll .upm_cleartoggle = dwc2_noop,
227 1.42 skrll .upm_done = dwc2_device_isoc_done,
228 1.1 skrll };
229 1.1 skrll
230 1.42 skrll struct usbd_xfer *
231 1.42 skrll dwc2_allocx(struct usbd_bus *bus, unsigned int nframes)
232 1.1 skrll {
233 1.1 skrll struct dwc2_softc *sc = DWC2_BUS2SC(bus);
234 1.1 skrll struct dwc2_xfer *dxfer;
235 1.1 skrll
236 1.1 skrll DPRINTFN(10, "\n");
237 1.1 skrll
238 1.1 skrll DWC2_EVCNT_INCR(sc->sc_ev_xferpoolget);
239 1.47 skrll dxfer = pool_cache_get(sc->sc_xferpool, PR_WAITOK);
240 1.1 skrll if (dxfer != NULL) {
241 1.1 skrll memset(dxfer, 0, sizeof(*dxfer));
242 1.1 skrll dxfer->urb = dwc2_hcd_urb_alloc(sc->sc_hsotg,
243 1.42 skrll nframes, GFP_KERNEL);
244 1.1 skrll #ifdef DIAGNOSTIC
245 1.42 skrll dxfer->xfer.ux_state = XFER_BUSY;
246 1.1 skrll #endif
247 1.1 skrll }
248 1.42 skrll return (struct usbd_xfer *)dxfer;
249 1.1 skrll }
250 1.1 skrll
251 1.1 skrll void
252 1.42 skrll dwc2_freex(struct usbd_bus *bus, struct usbd_xfer *xfer)
253 1.1 skrll {
254 1.1 skrll struct dwc2_xfer *dxfer = DWC2_XFER2DXFER(xfer);
255 1.1 skrll struct dwc2_softc *sc = DWC2_BUS2SC(bus);
256 1.1 skrll
257 1.1 skrll DPRINTFN(10, "\n");
258 1.1 skrll
259 1.1 skrll #ifdef DIAGNOSTIC
260 1.58 rin if (xfer->ux_state != XFER_BUSY &&
261 1.58 rin xfer->ux_status != USBD_NOT_STARTED) {
262 1.42 skrll DPRINTF("xfer=%p not busy, 0x%08x\n", xfer, xfer->ux_state);
263 1.1 skrll }
264 1.42 skrll xfer->ux_state = XFER_FREE;
265 1.1 skrll #endif
266 1.1 skrll DWC2_EVCNT_INCR(sc->sc_ev_xferpoolput);
267 1.42 skrll dwc2_hcd_urb_free(sc->sc_hsotg, dxfer->urb, dxfer->urb->packet_count);
268 1.1 skrll pool_cache_put(sc->sc_xferpool, xfer);
269 1.1 skrll }
270 1.1 skrll
271 1.67 riastrad Static bool
272 1.67 riastrad dwc2_dying(struct usbd_bus *bus)
273 1.67 riastrad {
274 1.67 riastrad struct dwc2_softc *sc = DWC2_BUS2SC(bus);
275 1.67 riastrad
276 1.67 riastrad return sc->sc_dying;
277 1.67 riastrad }
278 1.67 riastrad
279 1.1 skrll Static void
280 1.1 skrll dwc2_get_lock(struct usbd_bus *bus, kmutex_t **lock)
281 1.1 skrll {
282 1.1 skrll struct dwc2_softc *sc = DWC2_BUS2SC(bus);
283 1.1 skrll
284 1.1 skrll *lock = &sc->sc_lock;
285 1.1 skrll }
286 1.1 skrll
287 1.1 skrll Static void
288 1.1 skrll dwc2_rhc(void *addr)
289 1.1 skrll {
290 1.1 skrll struct dwc2_softc *sc = addr;
291 1.42 skrll struct usbd_xfer *xfer;
292 1.1 skrll u_char *p;
293 1.1 skrll
294 1.1 skrll DPRINTF("\n");
295 1.1 skrll mutex_enter(&sc->sc_lock);
296 1.1 skrll xfer = sc->sc_intrxfer;
297 1.1 skrll
298 1.1 skrll if (xfer == NULL) {
299 1.1 skrll /* Just ignore the change. */
300 1.1 skrll mutex_exit(&sc->sc_lock);
301 1.1 skrll return;
302 1.1 skrll
303 1.1 skrll }
304 1.69 riastrad KASSERT(xfer->ux_status == USBD_IN_PROGRESS);
305 1.69 riastrad
306 1.1 skrll /* set port bit */
307 1.42 skrll p = KERNADDR(&xfer->ux_dmabuf, 0);
308 1.1 skrll
309 1.1 skrll p[0] = 0x02; /* we only have one port (1 << 1) */
310 1.1 skrll
311 1.42 skrll xfer->ux_actlen = xfer->ux_length;
312 1.42 skrll xfer->ux_status = USBD_NORMAL_COMPLETION;
313 1.1 skrll
314 1.1 skrll usb_transfer_complete(xfer);
315 1.1 skrll mutex_exit(&sc->sc_lock);
316 1.1 skrll }
317 1.1 skrll
318 1.1 skrll Static void
319 1.1 skrll dwc2_softintr(void *v)
320 1.1 skrll {
321 1.1 skrll struct usbd_bus *bus = v;
322 1.1 skrll struct dwc2_softc *sc = DWC2_BUS2SC(bus);
323 1.3 skrll struct dwc2_hsotg *hsotg = sc->sc_hsotg;
324 1.67 riastrad struct dwc2_xfer *dxfer, *next;
325 1.67 riastrad TAILQ_HEAD(, dwc2_xfer) claimed = TAILQ_HEAD_INITIALIZER(claimed);
326 1.1 skrll
327 1.42 skrll KASSERT(sc->sc_bus.ub_usepolling || mutex_owned(&sc->sc_lock));
328 1.1 skrll
329 1.67 riastrad /*
330 1.67 riastrad * Grab all the xfers that have not been aborted or timed out.
331 1.67 riastrad * Do so under a single lock -- without dropping it to run
332 1.67 riastrad * usb_transfer_complete as we go -- so that dwc2_abortx won't
333 1.67 riastrad * remove next out from under us during iteration when we've
334 1.67 riastrad * dropped the lock.
335 1.67 riastrad */
336 1.3 skrll mutex_spin_enter(&hsotg->lock);
337 1.67 riastrad TAILQ_FOREACH_SAFE(dxfer, &sc->sc_complete, xnext, next) {
338 1.67 riastrad if (!usbd_xfer_trycomplete(&dxfer->xfer))
339 1.67 riastrad /*
340 1.67 riastrad * The hard interrput handler decided to
341 1.67 riastrad * complete the xfer, and put it on sc_complete
342 1.67 riastrad * to pass it to us in the soft interrupt
343 1.67 riastrad * handler, but in the time between hard
344 1.67 riastrad * interrupt and soft interrupt, the xfer was
345 1.67 riastrad * aborted or timed out and we lost the race.
346 1.67 riastrad */
347 1.1 skrll continue;
348 1.67 riastrad KASSERT(dxfer->xfer.ux_status == USBD_IN_PROGRESS);
349 1.67 riastrad KASSERT(dxfer->intr_status != USBD_CANCELLED);
350 1.67 riastrad KASSERT(dxfer->intr_status != USBD_TIMEOUT);
351 1.1 skrll TAILQ_REMOVE(&sc->sc_complete, dxfer, xnext);
352 1.67 riastrad TAILQ_INSERT_TAIL(&claimed, dxfer, xnext);
353 1.1 skrll }
354 1.3 skrll mutex_spin_exit(&hsotg->lock);
355 1.1 skrll
356 1.67 riastrad /* Now complete them. */
357 1.67 riastrad while (!TAILQ_EMPTY(&claimed)) {
358 1.67 riastrad dxfer = TAILQ_FIRST(&claimed);
359 1.67 riastrad KASSERT(dxfer->xfer.ux_status == USBD_IN_PROGRESS);
360 1.67 riastrad KASSERT(dxfer->intr_status != USBD_CANCELLED);
361 1.67 riastrad KASSERT(dxfer->intr_status != USBD_TIMEOUT);
362 1.67 riastrad TAILQ_REMOVE(&claimed, dxfer, xnext);
363 1.1 skrll
364 1.67 riastrad dxfer->xfer.ux_status = dxfer->intr_status;
365 1.67 riastrad usb_transfer_complete(&dxfer->xfer);
366 1.67 riastrad }
367 1.1 skrll }
368 1.1 skrll
369 1.1 skrll usbd_status
370 1.42 skrll dwc2_open(struct usbd_pipe *pipe)
371 1.1 skrll {
372 1.42 skrll struct usbd_device *dev = pipe->up_dev;
373 1.1 skrll struct dwc2_softc *sc = DWC2_PIPE2SC(pipe);
374 1.1 skrll struct dwc2_pipe *dpipe = DWC2_PIPE2DPIPE(pipe);
375 1.42 skrll usb_endpoint_descriptor_t *ed = pipe->up_endpoint->ue_edesc;
376 1.42 skrll uint8_t addr = dev->ud_addr;
377 1.1 skrll uint8_t xfertype = UE_GET_XFERTYPE(ed->bmAttributes);
378 1.1 skrll
379 1.1 skrll DPRINTF("pipe %p addr %d xfertype %d dir %s\n", pipe, addr, xfertype,
380 1.1 skrll UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN ? "in" : "out");
381 1.1 skrll
382 1.1 skrll if (sc->sc_dying) {
383 1.1 skrll return USBD_IOERROR;
384 1.1 skrll }
385 1.1 skrll
386 1.42 skrll if (addr == dev->ud_bus->ub_rhaddr) {
387 1.1 skrll switch (ed->bEndpointAddress) {
388 1.1 skrll case USB_CONTROL_ENDPOINT:
389 1.42 skrll pipe->up_methods = &roothub_ctrl_methods;
390 1.1 skrll break;
391 1.42 skrll case UE_DIR_IN | USBROOTHUB_INTR_ENDPT:
392 1.42 skrll pipe->up_methods = &dwc2_root_intr_methods;
393 1.1 skrll break;
394 1.1 skrll default:
395 1.1 skrll DPRINTF("bad bEndpointAddress 0x%02x\n",
396 1.1 skrll ed->bEndpointAddress);
397 1.1 skrll return USBD_INVAL;
398 1.1 skrll }
399 1.1 skrll DPRINTF("root hub pipe open\n");
400 1.1 skrll return USBD_NORMAL_COMPLETION;
401 1.1 skrll }
402 1.1 skrll
403 1.1 skrll switch (xfertype) {
404 1.1 skrll case UE_CONTROL:
405 1.42 skrll pipe->up_methods = &dwc2_device_ctrl_methods;
406 1.77 skrll int err = usb_allocmem(sc->sc_bus.ub_dmatag, sizeof(usb_device_request_t),
407 1.73 skrll 0, USBMALLOC_COHERENT, &dpipe->req_dma);
408 1.1 skrll if (err)
409 1.76 skrll return USBD_NOMEM;
410 1.1 skrll break;
411 1.1 skrll case UE_INTERRUPT:
412 1.42 skrll pipe->up_methods = &dwc2_device_intr_methods;
413 1.1 skrll break;
414 1.1 skrll case UE_ISOCHRONOUS:
415 1.42 skrll pipe->up_serialise = false;
416 1.42 skrll pipe->up_methods = &dwc2_device_isoc_methods;
417 1.1 skrll break;
418 1.1 skrll case UE_BULK:
419 1.42 skrll pipe->up_serialise = false;
420 1.42 skrll pipe->up_methods = &dwc2_device_bulk_methods;
421 1.1 skrll break;
422 1.1 skrll default:
423 1.1 skrll DPRINTF("bad xfer type %d\n", xfertype);
424 1.1 skrll return USBD_INVAL;
425 1.1 skrll }
426 1.1 skrll
427 1.42 skrll /* QH */
428 1.42 skrll dpipe->priv = NULL;
429 1.1 skrll
430 1.1 skrll return USBD_NORMAL_COMPLETION;
431 1.1 skrll }
432 1.1 skrll
433 1.1 skrll Static void
434 1.1 skrll dwc2_poll(struct usbd_bus *bus)
435 1.1 skrll {
436 1.1 skrll struct dwc2_softc *sc = DWC2_BUS2SC(bus);
437 1.3 skrll struct dwc2_hsotg *hsotg = sc->sc_hsotg;
438 1.1 skrll
439 1.3 skrll mutex_spin_enter(&hsotg->lock);
440 1.1 skrll dwc2_interrupt(sc);
441 1.3 skrll mutex_spin_exit(&hsotg->lock);
442 1.1 skrll }
443 1.1 skrll
444 1.1 skrll /*
445 1.1 skrll * Close a reqular pipe.
446 1.1 skrll * Assumes that there are no pending transactions.
447 1.1 skrll */
448 1.1 skrll Static void
449 1.42 skrll dwc2_close_pipe(struct usbd_pipe *pipe)
450 1.1 skrll {
451 1.71 riastrad struct dwc2_softc *sc __diagused = pipe->up_dev->ud_bus->ub_hcpriv;
452 1.1 skrll
453 1.1 skrll KASSERT(mutex_owned(&sc->sc_lock));
454 1.1 skrll }
455 1.1 skrll
456 1.1 skrll /*
457 1.1 skrll * Abort a device request.
458 1.1 skrll */
459 1.1 skrll Static void
460 1.67 riastrad dwc2_abortx(struct usbd_xfer *xfer)
461 1.1 skrll {
462 1.1 skrll struct dwc2_xfer *dxfer = DWC2_XFER2DXFER(xfer);
463 1.1 skrll struct dwc2_softc *sc = DWC2_XFER2SC(xfer);
464 1.1 skrll struct dwc2_hsotg *hsotg = sc->sc_hsotg;
465 1.67 riastrad struct dwc2_xfer *d;
466 1.1 skrll int err;
467 1.1 skrll
468 1.67 riastrad DPRINTF("xfer %p pipe %p status 0x%08x", xfer, xfer->ux_pipe,
469 1.67 riastrad xfer->ux_status);
470 1.1 skrll
471 1.1 skrll KASSERT(mutex_owned(&sc->sc_lock));
472 1.52 mrg ASSERT_SLEEPABLE();
473 1.1 skrll
474 1.67 riastrad KASSERTMSG((xfer->ux_status == USBD_CANCELLED ||
475 1.67 riastrad xfer->ux_status == USBD_TIMEOUT),
476 1.67 riastrad "bad abort status: %d", xfer->ux_status);
477 1.67 riastrad
478 1.67 riastrad mutex_spin_enter(&hsotg->lock);
479 1.1 skrll
480 1.1 skrll /*
481 1.67 riastrad * Check whether we aborted or timed out after the hardware
482 1.67 riastrad * completion interrupt determined that it's done but before
483 1.67 riastrad * the soft interrupt could actually complete it. If so, it's
484 1.67 riastrad * too late for the soft interrupt -- at this point we've
485 1.67 riastrad * already committed to abort it or time it out, so we need to
486 1.67 riastrad * take it off the softint's list of work in case the caller,
487 1.67 riastrad * say, frees the xfer before the softint runs.
488 1.67 riastrad *
489 1.67 riastrad * This logic is unusual among host controller drivers, and
490 1.67 riastrad * happens because dwc2 decides to complete xfers in the hard
491 1.67 riastrad * interrupt handler rather than in the soft interrupt handler,
492 1.67 riastrad * but usb_transfer_complete must be deferred to softint -- and
493 1.67 riastrad * we happened to swoop in between the hard interrupt and the
494 1.67 riastrad * soft interrupt. Other host controller drivers do almost all
495 1.67 riastrad * processing in the softint so there's no intermediate stage.
496 1.67 riastrad *
497 1.67 riastrad * Fortunately, this linear search to discern the intermediate
498 1.67 riastrad * stage is not likely to be a serious performance impact
499 1.67 riastrad * because it happens only on abort or timeout.
500 1.1 skrll */
501 1.67 riastrad TAILQ_FOREACH(d, &sc->sc_complete, xnext) {
502 1.67 riastrad if (d == dxfer) {
503 1.67 riastrad TAILQ_REMOVE(&sc->sc_complete, dxfer, xnext);
504 1.67 riastrad break;
505 1.67 riastrad }
506 1.67 riastrad }
507 1.52 mrg
508 1.52 mrg /*
509 1.52 mrg * If we're dying, skip the hardware action and just notify the
510 1.52 mrg * software that we're done.
511 1.52 mrg */
512 1.52 mrg if (sc->sc_dying) {
513 1.53 rin DPRINTFN(4, "xfer %p dying 0x%08x", xfer, xfer->ux_status);
514 1.52 mrg goto dying;
515 1.1 skrll }
516 1.1 skrll
517 1.1 skrll /*
518 1.79 riastrad * Handle the hardware.
519 1.1 skrll */
520 1.1 skrll err = dwc2_hcd_urb_dequeue(hsotg, dxfer->urb);
521 1.1 skrll if (err) {
522 1.1 skrll DPRINTF("dwc2_hcd_urb_dequeue failed\n");
523 1.1 skrll }
524 1.1 skrll
525 1.67 riastrad dying:
526 1.3 skrll mutex_spin_exit(&hsotg->lock);
527 1.52 mrg KASSERT(mutex_owned(&sc->sc_lock));
528 1.1 skrll }
529 1.1 skrll
530 1.1 skrll Static void
531 1.42 skrll dwc2_noop(struct usbd_pipe *pipe)
532 1.1 skrll {
533 1.1 skrll
534 1.1 skrll }
535 1.1 skrll
536 1.1 skrll Static void
537 1.42 skrll dwc2_device_clear_toggle(struct usbd_pipe *pipe)
538 1.1 skrll {
539 1.1 skrll
540 1.42 skrll DPRINTF("toggle %d -> 0", pipe->up_endpoint->ue_toggle);
541 1.1 skrll }
542 1.1 skrll
543 1.1 skrll /***********************************************************************/
544 1.1 skrll
545 1.42 skrll Static int
546 1.42 skrll dwc2_roothub_ctrl(struct usbd_bus *bus, usb_device_request_t *req,
547 1.42 skrll void *buf, int buflen)
548 1.1 skrll {
549 1.42 skrll struct dwc2_softc *sc = bus->ub_hcpriv;
550 1.1 skrll usbd_status err = USBD_IOERROR;
551 1.42 skrll uint16_t len, value, index;
552 1.42 skrll int totlen = 0;
553 1.1 skrll
554 1.1 skrll if (sc->sc_dying)
555 1.42 skrll return -1;
556 1.1 skrll
557 1.1 skrll DPRINTFN(4, "type=0x%02x request=%02x\n",
558 1.1 skrll req->bmRequestType, req->bRequest);
559 1.1 skrll
560 1.1 skrll len = UGETW(req->wLength);
561 1.1 skrll value = UGETW(req->wValue);
562 1.1 skrll index = UGETW(req->wIndex);
563 1.1 skrll
564 1.1 skrll #define C(x,y) ((x) | ((y) << 8))
565 1.1 skrll switch (C(req->bRequest, req->bmRequestType)) {
566 1.1 skrll case C(UR_GET_DESCRIPTOR, UT_READ_DEVICE):
567 1.1 skrll DPRINTFN(8, "wValue=0x%04x\n", value);
568 1.1 skrll
569 1.1 skrll if (len == 0)
570 1.1 skrll break;
571 1.1 skrll switch (value) {
572 1.1 skrll #define sd ((usb_string_descriptor_t *)buf)
573 1.1 skrll case C(2, UDESC_STRING):
574 1.42 skrll /* Product */
575 1.1 skrll totlen = usb_makestrdesc(sd, len, "DWC2 root hub");
576 1.1 skrll break;
577 1.1 skrll #undef sd
578 1.1 skrll default:
579 1.42 skrll /* default from usbroothub */
580 1.42 skrll return buflen;
581 1.1 skrll }
582 1.1 skrll break;
583 1.42 skrll
584 1.42 skrll case C(UR_GET_CONFIG, UT_READ_DEVICE):
585 1.1 skrll case C(UR_GET_INTERFACE, UT_READ_INTERFACE):
586 1.1 skrll case C(UR_GET_STATUS, UT_READ_INTERFACE):
587 1.1 skrll case C(UR_GET_STATUS, UT_READ_ENDPOINT):
588 1.1 skrll case C(UR_SET_ADDRESS, UT_WRITE_DEVICE):
589 1.42 skrll case C(UR_SET_CONFIG, UT_WRITE_DEVICE):
590 1.42 skrll /* default from usbroothub */
591 1.42 skrll DPRINTFN(4, "returning %d (usbroothub default)", buflen);
592 1.1 skrll
593 1.42 skrll return buflen;
594 1.1 skrll
595 1.1 skrll default:
596 1.42 skrll /* Hub requests */
597 1.1 skrll err = dwc2_hcd_hub_control(sc->sc_hsotg,
598 1.1 skrll C(req->bRequest, req->bmRequestType), value, index,
599 1.1 skrll buf, len);
600 1.1 skrll if (err) {
601 1.42 skrll return -1;
602 1.1 skrll }
603 1.1 skrll totlen = len;
604 1.1 skrll }
605 1.1 skrll
606 1.42 skrll return totlen;
607 1.1 skrll }
608 1.1 skrll
609 1.1 skrll Static usbd_status
610 1.42 skrll dwc2_root_intr_transfer(struct usbd_xfer *xfer)
611 1.1 skrll {
612 1.1 skrll
613 1.1 skrll DPRINTF("\n");
614 1.1 skrll
615 1.1 skrll /* Pipe isn't running, start first */
616 1.42 skrll return dwc2_root_intr_start(SIMPLEQ_FIRST(&xfer->ux_pipe->up_queue));
617 1.1 skrll }
618 1.1 skrll
619 1.1 skrll Static usbd_status
620 1.42 skrll dwc2_root_intr_start(struct usbd_xfer *xfer)
621 1.1 skrll {
622 1.27 skrll struct dwc2_softc *sc = DWC2_XFER2SC(xfer);
623 1.1 skrll
624 1.1 skrll DPRINTF("\n");
625 1.1 skrll
626 1.80 riastrad KASSERT(sc->sc_bus.ub_usepolling || mutex_owned(&sc->sc_lock));
627 1.80 riastrad
628 1.1 skrll if (sc->sc_dying)
629 1.1 skrll return USBD_IOERROR;
630 1.1 skrll
631 1.1 skrll KASSERT(sc->sc_intrxfer == NULL);
632 1.1 skrll sc->sc_intrxfer = xfer;
633 1.69 riastrad xfer->ux_status = USBD_IN_PROGRESS;
634 1.1 skrll
635 1.69 riastrad return USBD_IN_PROGRESS;
636 1.1 skrll }
637 1.1 skrll
638 1.1 skrll /* Abort a root interrupt request. */
639 1.1 skrll Static void
640 1.42 skrll dwc2_root_intr_abort(struct usbd_xfer *xfer)
641 1.1 skrll {
642 1.54 skrll struct dwc2_softc *sc __diagused = DWC2_XFER2SC(xfer);
643 1.31 skrll
644 1.1 skrll DPRINTF("xfer=%p\n", xfer);
645 1.1 skrll
646 1.1 skrll KASSERT(mutex_owned(&sc->sc_lock));
647 1.42 skrll KASSERT(xfer->ux_pipe->up_intrxfer == xfer);
648 1.1 skrll
649 1.68 riastrad /* If xfer has already completed, nothing to do here. */
650 1.68 riastrad if (sc->sc_intrxfer == NULL)
651 1.68 riastrad return;
652 1.68 riastrad
653 1.68 riastrad /*
654 1.68 riastrad * Otherwise, sc->sc_intrxfer had better be this transfer.
655 1.68 riastrad * Cancel it.
656 1.68 riastrad */
657 1.68 riastrad KASSERT(sc->sc_intrxfer == xfer);
658 1.68 riastrad KASSERT(xfer->ux_status == USBD_IN_PROGRESS);
659 1.42 skrll xfer->ux_status = USBD_CANCELLED;
660 1.1 skrll usb_transfer_complete(xfer);
661 1.1 skrll }
662 1.1 skrll
663 1.1 skrll Static void
664 1.42 skrll dwc2_root_intr_close(struct usbd_pipe *pipe)
665 1.1 skrll {
666 1.70 riastrad struct dwc2_softc *sc __diagused = DWC2_PIPE2SC(pipe);
667 1.1 skrll
668 1.1 skrll DPRINTF("\n");
669 1.1 skrll
670 1.1 skrll KASSERT(mutex_owned(&sc->sc_lock));
671 1.1 skrll
672 1.68 riastrad /*
673 1.68 riastrad * Caller must guarantee the xfer has completed first, by
674 1.68 riastrad * closing the pipe only after normal completion or an abort.
675 1.68 riastrad */
676 1.68 riastrad KASSERT(sc->sc_intrxfer == NULL);
677 1.1 skrll }
678 1.1 skrll
679 1.1 skrll Static void
680 1.42 skrll dwc2_root_intr_done(struct usbd_xfer *xfer)
681 1.1 skrll {
682 1.42 skrll struct dwc2_softc *sc = DWC2_XFER2SC(xfer);
683 1.1 skrll
684 1.68 riastrad DPRINTF("\n");
685 1.68 riastrad
686 1.68 riastrad /* Claim the xfer so it doesn't get completed again. */
687 1.68 riastrad KASSERT(sc->sc_intrxfer == xfer);
688 1.68 riastrad KASSERT(xfer->ux_status != USBD_IN_PROGRESS);
689 1.42 skrll sc->sc_intrxfer = NULL;
690 1.1 skrll }
691 1.1 skrll
692 1.1 skrll /***********************************************************************/
693 1.1 skrll
694 1.1 skrll Static usbd_status
695 1.42 skrll dwc2_device_ctrl_transfer(struct usbd_xfer *xfer)
696 1.1 skrll {
697 1.1 skrll
698 1.1 skrll DPRINTF("\n");
699 1.1 skrll
700 1.1 skrll /* Pipe isn't running, start first */
701 1.42 skrll return dwc2_device_ctrl_start(SIMPLEQ_FIRST(&xfer->ux_pipe->up_queue));
702 1.1 skrll }
703 1.1 skrll
704 1.1 skrll Static usbd_status
705 1.42 skrll dwc2_device_ctrl_start(struct usbd_xfer *xfer)
706 1.1 skrll {
707 1.1 skrll struct dwc2_softc *sc = DWC2_XFER2SC(xfer);
708 1.8 skrll usbd_status err;
709 1.1 skrll
710 1.1 skrll DPRINTF("\n");
711 1.1 skrll
712 1.80 riastrad KASSERT(sc->sc_bus.ub_usepolling || mutex_owned(&sc->sc_lock));
713 1.80 riastrad
714 1.42 skrll xfer->ux_status = USBD_IN_PROGRESS;
715 1.8 skrll err = dwc2_device_start(xfer);
716 1.8 skrll if (err)
717 1.8 skrll return err;
718 1.8 skrll
719 1.1 skrll return USBD_IN_PROGRESS;
720 1.1 skrll }
721 1.1 skrll
722 1.1 skrll Static void
723 1.42 skrll dwc2_device_ctrl_abort(struct usbd_xfer *xfer)
724 1.1 skrll {
725 1.71 riastrad struct dwc2_softc *sc __diagused = DWC2_XFER2SC(xfer);
726 1.71 riastrad
727 1.1 skrll KASSERT(mutex_owned(&sc->sc_lock));
728 1.1 skrll
729 1.1 skrll DPRINTF("xfer=%p\n", xfer);
730 1.67 riastrad usbd_xfer_abort(xfer);
731 1.1 skrll }
732 1.1 skrll
733 1.1 skrll Static void
734 1.42 skrll dwc2_device_ctrl_close(struct usbd_pipe *pipe)
735 1.1 skrll {
736 1.72 skrll struct dwc2_pipe * const dpipe = DWC2_PIPE2DPIPE(pipe);
737 1.1 skrll
738 1.1 skrll DPRINTF("pipe=%p\n", pipe);
739 1.1 skrll dwc2_close_pipe(pipe);
740 1.72 skrll
741 1.77 skrll usb_freemem(&dpipe->req_dma);
742 1.1 skrll }
743 1.1 skrll
744 1.1 skrll Static void
745 1.42 skrll dwc2_device_ctrl_done(struct usbd_xfer *xfer)
746 1.1 skrll {
747 1.1 skrll
748 1.1 skrll DPRINTF("xfer=%p\n", xfer);
749 1.1 skrll }
750 1.1 skrll
751 1.1 skrll /***********************************************************************/
752 1.1 skrll
753 1.1 skrll Static usbd_status
754 1.42 skrll dwc2_device_bulk_transfer(struct usbd_xfer *xfer)
755 1.1 skrll {
756 1.1 skrll
757 1.1 skrll DPRINTF("xfer=%p\n", xfer);
758 1.1 skrll
759 1.78 riastrad KASSERT(xfer->ux_status == USBD_NOT_STARTED);
760 1.42 skrll xfer->ux_status = USBD_IN_PROGRESS;
761 1.80 riastrad return dwc2_device_start(xfer);
762 1.1 skrll }
763 1.1 skrll
764 1.1 skrll Static void
765 1.42 skrll dwc2_device_bulk_abort(struct usbd_xfer *xfer)
766 1.1 skrll {
767 1.71 riastrad struct dwc2_softc *sc __diagused = DWC2_XFER2SC(xfer);
768 1.71 riastrad
769 1.1 skrll KASSERT(mutex_owned(&sc->sc_lock));
770 1.1 skrll
771 1.1 skrll DPRINTF("xfer=%p\n", xfer);
772 1.67 riastrad usbd_xfer_abort(xfer);
773 1.1 skrll }
774 1.1 skrll
775 1.1 skrll Static void
776 1.42 skrll dwc2_device_bulk_close(struct usbd_pipe *pipe)
777 1.1 skrll {
778 1.1 skrll
779 1.1 skrll DPRINTF("pipe=%p\n", pipe);
780 1.1 skrll
781 1.1 skrll dwc2_close_pipe(pipe);
782 1.1 skrll }
783 1.1 skrll
784 1.1 skrll Static void
785 1.42 skrll dwc2_device_bulk_done(struct usbd_xfer *xfer)
786 1.1 skrll {
787 1.1 skrll
788 1.36 skrll DPRINTF("xfer=%p\n", xfer);
789 1.1 skrll }
790 1.1 skrll
791 1.1 skrll /***********************************************************************/
792 1.1 skrll
793 1.1 skrll Static usbd_status
794 1.42 skrll dwc2_device_intr_transfer(struct usbd_xfer *xfer)
795 1.1 skrll {
796 1.1 skrll
797 1.1 skrll DPRINTF("xfer=%p\n", xfer);
798 1.1 skrll
799 1.1 skrll /* Pipe isn't running, start first */
800 1.42 skrll return dwc2_device_intr_start(SIMPLEQ_FIRST(&xfer->ux_pipe->up_queue));
801 1.1 skrll }
802 1.1 skrll
803 1.1 skrll Static usbd_status
804 1.42 skrll dwc2_device_intr_start(struct usbd_xfer *xfer)
805 1.1 skrll {
806 1.28 skrll struct dwc2_pipe *dpipe = DWC2_XFER2DPIPE(xfer)
807 1.42 skrll struct usbd_device *dev = dpipe->pipe.up_dev;
808 1.42 skrll struct dwc2_softc *sc = dev->ud_bus->ub_hcpriv;
809 1.8 skrll usbd_status err;
810 1.1 skrll
811 1.80 riastrad KASSERT(sc->sc_bus.ub_usepolling || mutex_owned(&sc->sc_lock));
812 1.80 riastrad
813 1.42 skrll xfer->ux_status = USBD_IN_PROGRESS;
814 1.8 skrll err = dwc2_device_start(xfer);
815 1.8 skrll if (err)
816 1.8 skrll return err;
817 1.8 skrll
818 1.1 skrll return USBD_IN_PROGRESS;
819 1.1 skrll }
820 1.1 skrll
821 1.1 skrll /* Abort a device interrupt request. */
822 1.1 skrll Static void
823 1.42 skrll dwc2_device_intr_abort(struct usbd_xfer *xfer)
824 1.1 skrll {
825 1.71 riastrad struct dwc2_softc *sc __diagused = DWC2_XFER2SC(xfer);
826 1.1 skrll
827 1.1 skrll KASSERT(mutex_owned(&sc->sc_lock));
828 1.1 skrll
829 1.1 skrll DPRINTF("xfer=%p\n", xfer);
830 1.67 riastrad usbd_xfer_abort(xfer);
831 1.1 skrll }
832 1.1 skrll
833 1.1 skrll Static void
834 1.42 skrll dwc2_device_intr_close(struct usbd_pipe *pipe)
835 1.1 skrll {
836 1.1 skrll
837 1.1 skrll DPRINTF("pipe=%p\n", pipe);
838 1.1 skrll
839 1.1 skrll dwc2_close_pipe(pipe);
840 1.1 skrll }
841 1.1 skrll
842 1.1 skrll Static void
843 1.42 skrll dwc2_device_intr_done(struct usbd_xfer *xfer)
844 1.1 skrll {
845 1.1 skrll
846 1.1 skrll DPRINTF("\n");
847 1.1 skrll }
848 1.1 skrll
849 1.1 skrll /***********************************************************************/
850 1.1 skrll
851 1.1 skrll usbd_status
852 1.42 skrll dwc2_device_isoc_transfer(struct usbd_xfer *xfer)
853 1.1 skrll {
854 1.1 skrll
855 1.1 skrll DPRINTF("xfer=%p\n", xfer);
856 1.1 skrll
857 1.78 riastrad KASSERT(xfer->ux_status == USBD_NOT_STARTED);
858 1.42 skrll xfer->ux_status = USBD_IN_PROGRESS;
859 1.80 riastrad return dwc2_device_start(xfer);
860 1.1 skrll }
861 1.1 skrll
862 1.1 skrll void
863 1.42 skrll dwc2_device_isoc_abort(struct usbd_xfer *xfer)
864 1.1 skrll {
865 1.42 skrll struct dwc2_softc *sc __diagused = DWC2_XFER2SC(xfer);
866 1.7 skrll KASSERT(mutex_owned(&sc->sc_lock));
867 1.7 skrll
868 1.7 skrll DPRINTF("xfer=%p\n", xfer);
869 1.67 riastrad usbd_xfer_abort(xfer);
870 1.1 skrll }
871 1.1 skrll
872 1.1 skrll void
873 1.42 skrll dwc2_device_isoc_close(struct usbd_pipe *pipe)
874 1.1 skrll {
875 1.1 skrll DPRINTF("\n");
876 1.1 skrll
877 1.1 skrll dwc2_close_pipe(pipe);
878 1.1 skrll }
879 1.1 skrll
880 1.1 skrll void
881 1.42 skrll dwc2_device_isoc_done(struct usbd_xfer *xfer)
882 1.1 skrll {
883 1.1 skrll
884 1.1 skrll DPRINTF("\n");
885 1.1 skrll }
886 1.1 skrll
887 1.1 skrll
888 1.1 skrll usbd_status
889 1.42 skrll dwc2_device_start(struct usbd_xfer *xfer)
890 1.1 skrll {
891 1.1 skrll struct dwc2_xfer *dxfer = DWC2_XFER2DXFER(xfer);
892 1.1 skrll struct dwc2_pipe *dpipe = DWC2_XFER2DPIPE(xfer);
893 1.1 skrll struct dwc2_softc *sc = DWC2_XFER2SC(xfer);
894 1.1 skrll struct dwc2_hsotg *hsotg = sc->sc_hsotg;
895 1.33 skrll struct dwc2_hcd_urb *dwc2_urb;
896 1.1 skrll
897 1.42 skrll struct usbd_device *dev = xfer->ux_pipe->up_dev;
898 1.42 skrll usb_endpoint_descriptor_t *ed = xfer->ux_pipe->up_endpoint->ue_edesc;
899 1.42 skrll uint8_t addr = dev->ud_addr;
900 1.1 skrll uint8_t xfertype = UE_GET_XFERTYPE(ed->bmAttributes);
901 1.1 skrll uint8_t epnum = UE_GET_ADDR(ed->bEndpointAddress);
902 1.1 skrll uint8_t dir = UE_GET_DIR(ed->bEndpointAddress);
903 1.1 skrll uint16_t mps = UE_GET_SIZE(UGETW(ed->wMaxPacketSize));
904 1.1 skrll uint32_t len;
905 1.1 skrll
906 1.1 skrll uint32_t flags = 0;
907 1.7 skrll uint32_t off = 0;
908 1.37 skrll int retval, err;
909 1.1 skrll int alloc_bandwidth = 0;
910 1.1 skrll
911 1.42 skrll DPRINTFN(1, "xfer=%p pipe=%p\n", xfer, xfer->ux_pipe);
912 1.1 skrll
913 1.80 riastrad KASSERT(sc->sc_bus.ub_usepolling || mutex_owned(&sc->sc_lock));
914 1.80 riastrad
915 1.1 skrll if (xfertype == UE_ISOCHRONOUS ||
916 1.1 skrll xfertype == UE_INTERRUPT) {
917 1.3 skrll mutex_spin_enter(&hsotg->lock);
918 1.1 skrll if (!dwc2_hcd_is_bandwidth_allocated(hsotg, xfer))
919 1.1 skrll alloc_bandwidth = 1;
920 1.3 skrll mutex_spin_exit(&hsotg->lock);
921 1.1 skrll }
922 1.1 skrll
923 1.1 skrll /*
924 1.1 skrll * For Control pipe the direction is from the request, all other
925 1.1 skrll * transfers have been set correctly at pipe open time.
926 1.1 skrll */
927 1.1 skrll if (xfertype == UE_CONTROL) {
928 1.42 skrll usb_device_request_t *req = &xfer->ux_request;
929 1.1 skrll
930 1.4 skrll DPRINTFN(3, "xfer=%p type=0x%02x request=0x%02x wValue=0x%04x "
931 1.4 skrll "wIndex=0x%04x len=%d addr=%d endpt=%d dir=%s speed=%d "
932 1.2 skrll "mps=%d\n",
933 1.1 skrll xfer, req->bmRequestType, req->bRequest, UGETW(req->wValue),
934 1.42 skrll UGETW(req->wIndex), UGETW(req->wLength), dev->ud_addr,
935 1.42 skrll epnum, dir == UT_READ ? "in" :"out", dev->ud_speed, mps);
936 1.1 skrll
937 1.1 skrll /* Copy request packet to our DMA buffer */
938 1.1 skrll memcpy(KERNADDR(&dpipe->req_dma, 0), req, sizeof(*req));
939 1.1 skrll usb_syncmem(&dpipe->req_dma, 0, sizeof(*req),
940 1.42 skrll BUS_DMASYNC_PREWRITE);
941 1.1 skrll len = UGETW(req->wLength);
942 1.1 skrll if ((req->bmRequestType & UT_READ) == UT_READ) {
943 1.1 skrll dir = UE_DIR_IN;
944 1.1 skrll } else {
945 1.1 skrll dir = UE_DIR_OUT;
946 1.1 skrll }
947 1.1 skrll
948 1.18 skrll DPRINTFN(3, "req = %p dma = %" PRIxBUSADDR " len %d dir %s\n",
949 1.1 skrll KERNADDR(&dpipe->req_dma, 0), DMAADDR(&dpipe->req_dma, 0),
950 1.1 skrll len, dir == UE_DIR_IN ? "in" : "out");
951 1.64 skrll } else if (xfertype == UE_ISOCHRONOUS) {
952 1.64 skrll DPRINTFN(3, "xfer=%p nframes=%d flags=%d addr=%d endpt=%d,"
953 1.64 skrll " mps=%d dir %s\n", xfer, xfer->ux_nframes, xfer->ux_flags, addr,
954 1.64 skrll epnum, mps, dir == UT_READ ? "in" :"out");
955 1.64 skrll
956 1.74 skrll #ifdef DIAGNOSTIC
957 1.65 jmcneill len = 0;
958 1.66 skrll for (size_t i = 0; i < xfer->ux_nframes; i++)
959 1.64 skrll len += xfer->ux_frlengths[i];
960 1.74 skrll if (len != xfer->ux_length)
961 1.74 skrll panic("len (%d) != xfer->ux_length (%d)", len,
962 1.74 skrll xfer->ux_length);
963 1.74 skrll #endif
964 1.74 skrll len = xfer->ux_length;
965 1.1 skrll } else {
966 1.4 skrll DPRINTFN(3, "xfer=%p len=%d flags=%d addr=%d endpt=%d,"
967 1.42 skrll " mps=%d dir %s\n", xfer, xfer->ux_length, xfer->ux_flags, addr,
968 1.2 skrll epnum, mps, dir == UT_READ ? "in" :"out");
969 1.1 skrll
970 1.42 skrll len = xfer->ux_length;
971 1.1 skrll }
972 1.1 skrll
973 1.1 skrll dwc2_urb = dxfer->urb;
974 1.1 skrll if (!dwc2_urb)
975 1.42 skrll return USBD_NOMEM;
976 1.1 skrll
977 1.42 skrll KASSERT(dwc2_urb->packet_count == xfer->ux_nframes);
978 1.20 skrll memset(dwc2_urb, 0, sizeof(*dwc2_urb) +
979 1.42 skrll sizeof(dwc2_urb->iso_descs[0]) * dwc2_urb->packet_count);
980 1.1 skrll
981 1.37 skrll dwc2_urb->priv = xfer;
982 1.42 skrll dwc2_urb->packet_count = xfer->ux_nframes;
983 1.37 skrll
984 1.1 skrll dwc2_hcd_urb_set_pipeinfo(hsotg, dwc2_urb, addr, epnum, xfertype, dir,
985 1.42 skrll mps);
986 1.1 skrll
987 1.1 skrll if (xfertype == UE_CONTROL) {
988 1.1 skrll dwc2_urb->setup_usbdma = &dpipe->req_dma;
989 1.1 skrll dwc2_urb->setup_packet = KERNADDR(&dpipe->req_dma, 0);
990 1.1 skrll dwc2_urb->setup_dma = DMAADDR(&dpipe->req_dma, 0);
991 1.1 skrll } else {
992 1.1 skrll /* XXXNH - % mps required? */
993 1.42 skrll if ((xfer->ux_flags & USBD_FORCE_SHORT_XFER) && (len % mps) == 0)
994 1.1 skrll flags |= URB_SEND_ZERO_PACKET;
995 1.1 skrll }
996 1.1 skrll flags |= URB_GIVEBACK_ASAP;
997 1.1 skrll
998 1.26 skrll /*
999 1.26 skrll * control transfers with no data phase don't touch usbdma, but
1000 1.26 skrll * everything else does.
1001 1.26 skrll */
1002 1.26 skrll if (!(xfertype == UE_CONTROL && len == 0)) {
1003 1.42 skrll dwc2_urb->usbdma = &xfer->ux_dmabuf;
1004 1.26 skrll dwc2_urb->buf = KERNADDR(dwc2_urb->usbdma, 0);
1005 1.26 skrll dwc2_urb->dma = DMAADDR(dwc2_urb->usbdma, 0);
1006 1.45 skrll
1007 1.45 skrll usb_syncmem(&xfer->ux_dmabuf, 0, len,
1008 1.45 skrll dir == UE_DIR_IN ?
1009 1.45 skrll BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
1010 1.26 skrll }
1011 1.7 skrll dwc2_urb->length = len;
1012 1.1 skrll dwc2_urb->flags = flags;
1013 1.1 skrll dwc2_urb->status = -EINPROGRESS;
1014 1.7 skrll
1015 1.19 skrll if (xfertype == UE_INTERRUPT ||
1016 1.19 skrll xfertype == UE_ISOCHRONOUS) {
1017 1.19 skrll uint16_t ival;
1018 1.19 skrll
1019 1.19 skrll if (xfertype == UE_INTERRUPT &&
1020 1.42 skrll dpipe->pipe.up_interval != USBD_DEFAULT_INTERVAL) {
1021 1.42 skrll ival = dpipe->pipe.up_interval;
1022 1.19 skrll } else {
1023 1.19 skrll ival = ed->bInterval;
1024 1.19 skrll }
1025 1.19 skrll
1026 1.19 skrll if (ival < 1) {
1027 1.19 skrll retval = -ENODEV;
1028 1.19 skrll goto fail;
1029 1.19 skrll }
1030 1.42 skrll if (dev->ud_speed == USB_SPEED_HIGH ||
1031 1.42 skrll (dev->ud_speed == USB_SPEED_FULL && xfertype == UE_ISOCHRONOUS)) {
1032 1.19 skrll if (ival > 16) {
1033 1.19 skrll /*
1034 1.19 skrll * illegal with HS/FS, but there were
1035 1.19 skrll * documentation bugs in the spec
1036 1.19 skrll */
1037 1.19 skrll ival = 256;
1038 1.19 skrll } else {
1039 1.19 skrll ival = (1 << (ival - 1));
1040 1.19 skrll }
1041 1.19 skrll } else {
1042 1.19 skrll if (xfertype == UE_INTERRUPT && ival < 10)
1043 1.19 skrll ival = 10;
1044 1.19 skrll }
1045 1.19 skrll dwc2_urb->interval = ival;
1046 1.19 skrll }
1047 1.1 skrll
1048 1.1 skrll /* XXXNH bring down from callers?? */
1049 1.1 skrll // mutex_enter(&sc->sc_lock);
1050 1.1 skrll
1051 1.42 skrll xfer->ux_actlen = 0;
1052 1.1 skrll
1053 1.7 skrll KASSERT(xfertype != UE_ISOCHRONOUS ||
1054 1.42 skrll xfer->ux_nframes <= dwc2_urb->packet_count);
1055 1.42 skrll KASSERTMSG(xfer->ux_nframes == 0 || xfertype == UE_ISOCHRONOUS,
1056 1.42 skrll "nframes %d xfertype %d\n", xfer->ux_nframes, xfertype);
1057 1.7 skrll
1058 1.63 skrll off = 0;
1059 1.63 skrll for (size_t i = 0; i < xfer->ux_nframes; ++i) {
1060 1.63 skrll DPRINTFN(3, "xfer=%p frame=%zd offset=%d length=%d\n", xfer, i,
1061 1.42 skrll off, xfer->ux_frlengths[i]);
1062 1.7 skrll
1063 1.7 skrll dwc2_hcd_urb_set_iso_desc_params(dwc2_urb, i, off,
1064 1.42 skrll xfer->ux_frlengths[i]);
1065 1.42 skrll off += xfer->ux_frlengths[i];
1066 1.7 skrll }
1067 1.7 skrll
1068 1.37 skrll struct dwc2_qh *qh = dpipe->priv;
1069 1.37 skrll struct dwc2_qtd *qtd;
1070 1.37 skrll bool qh_allocated = false;
1071 1.37 skrll
1072 1.37 skrll /* Create QH for the endpoint if it doesn't exist */
1073 1.37 skrll if (!qh) {
1074 1.37 skrll qh = dwc2_hcd_qh_create(hsotg, dwc2_urb, GFP_ATOMIC);
1075 1.37 skrll if (!qh) {
1076 1.37 skrll retval = -ENOMEM;
1077 1.37 skrll goto fail;
1078 1.37 skrll }
1079 1.37 skrll dpipe->priv = qh;
1080 1.37 skrll qh_allocated = true;
1081 1.37 skrll }
1082 1.37 skrll
1083 1.37 skrll qtd = pool_cache_get(sc->sc_qtdpool, PR_NOWAIT);
1084 1.37 skrll if (!qtd) {
1085 1.37 skrll retval = -ENOMEM;
1086 1.37 skrll goto fail1;
1087 1.37 skrll }
1088 1.37 skrll memset(qtd, 0, sizeof(*qtd));
1089 1.37 skrll
1090 1.1 skrll /* might need to check cpu_intr_p */
1091 1.23 skrll mutex_spin_enter(&hsotg->lock);
1092 1.37 skrll retval = dwc2_hcd_urb_enqueue(hsotg, dwc2_urb, qh, qtd);
1093 1.1 skrll if (retval)
1094 1.37 skrll goto fail2;
1095 1.67 riastrad usbd_xfer_schedule_timeout(xfer);
1096 1.67 riastrad xfer->ux_status = USBD_IN_PROGRESS;
1097 1.1 skrll
1098 1.1 skrll if (alloc_bandwidth) {
1099 1.7 skrll dwc2_allocate_bus_bandwidth(hsotg,
1100 1.7 skrll dwc2_hcd_get_ep_bandwidth(hsotg, dpipe),
1101 1.7 skrll xfer);
1102 1.1 skrll }
1103 1.23 skrll mutex_spin_exit(&hsotg->lock);
1104 1.37 skrll
1105 1.37 skrll return USBD_IN_PROGRESS;
1106 1.37 skrll
1107 1.37 skrll fail2:
1108 1.37 skrll dwc2_urb->priv = NULL;
1109 1.37 skrll mutex_spin_exit(&hsotg->lock);
1110 1.37 skrll pool_cache_put(sc->sc_qtdpool, qtd);
1111 1.23 skrll
1112 1.37 skrll fail1:
1113 1.37 skrll if (qh_allocated) {
1114 1.37 skrll dpipe->priv = NULL;
1115 1.37 skrll dwc2_hcd_qh_free(hsotg, qh);
1116 1.37 skrll }
1117 1.37 skrll fail:
1118 1.1 skrll
1119 1.1 skrll switch (retval) {
1120 1.37 skrll case -EINVAL:
1121 1.1 skrll case -ENODEV:
1122 1.11 skrll err = USBD_INVAL;
1123 1.1 skrll break;
1124 1.1 skrll case -ENOMEM:
1125 1.1 skrll err = USBD_NOMEM;
1126 1.1 skrll break;
1127 1.1 skrll default:
1128 1.1 skrll err = USBD_IOERROR;
1129 1.1 skrll }
1130 1.1 skrll
1131 1.1 skrll return err;
1132 1.1 skrll
1133 1.1 skrll }
1134 1.1 skrll
1135 1.1 skrll int dwc2_intr(void *p)
1136 1.1 skrll {
1137 1.1 skrll struct dwc2_softc *sc = p;
1138 1.3 skrll struct dwc2_hsotg *hsotg;
1139 1.1 skrll int ret = 0;
1140 1.1 skrll
1141 1.1 skrll if (sc == NULL)
1142 1.1 skrll return 0;
1143 1.1 skrll
1144 1.3 skrll hsotg = sc->sc_hsotg;
1145 1.3 skrll mutex_spin_enter(&hsotg->lock);
1146 1.1 skrll
1147 1.1 skrll if (sc->sc_dying || !device_has_power(sc->sc_dev))
1148 1.1 skrll goto done;
1149 1.1 skrll
1150 1.42 skrll if (sc->sc_bus.ub_usepolling) {
1151 1.1 skrll uint32_t intrs;
1152 1.1 skrll
1153 1.1 skrll intrs = dwc2_read_core_intr(hsotg);
1154 1.1 skrll DWC2_WRITE_4(hsotg, GINTSTS, intrs);
1155 1.1 skrll } else {
1156 1.1 skrll ret = dwc2_interrupt(sc);
1157 1.1 skrll }
1158 1.1 skrll
1159 1.1 skrll done:
1160 1.3 skrll mutex_spin_exit(&hsotg->lock);
1161 1.1 skrll
1162 1.1 skrll return ret;
1163 1.1 skrll }
1164 1.1 skrll
1165 1.1 skrll int
1166 1.1 skrll dwc2_interrupt(struct dwc2_softc *sc)
1167 1.1 skrll {
1168 1.1 skrll int ret = 0;
1169 1.1 skrll
1170 1.1 skrll if (sc->sc_hcdenabled) {
1171 1.1 skrll ret |= dwc2_handle_hcd_intr(sc->sc_hsotg);
1172 1.1 skrll }
1173 1.1 skrll
1174 1.1 skrll ret |= dwc2_handle_common_intr(sc->sc_hsotg);
1175 1.1 skrll
1176 1.1 skrll return ret;
1177 1.1 skrll }
1178 1.1 skrll
1179 1.1 skrll /***********************************************************************/
1180 1.1 skrll
1181 1.1 skrll int
1182 1.1 skrll dwc2_detach(struct dwc2_softc *sc, int flags)
1183 1.1 skrll {
1184 1.1 skrll int rv = 0;
1185 1.1 skrll
1186 1.1 skrll if (sc->sc_child != NULL)
1187 1.1 skrll rv = config_detach(sc->sc_child, flags);
1188 1.1 skrll
1189 1.1 skrll return rv;
1190 1.1 skrll }
1191 1.1 skrll
1192 1.1 skrll bool
1193 1.1 skrll dwc2_shutdown(device_t self, int flags)
1194 1.1 skrll {
1195 1.1 skrll struct dwc2_softc *sc = device_private(self);
1196 1.1 skrll
1197 1.1 skrll sc = sc;
1198 1.1 skrll
1199 1.1 skrll return true;
1200 1.1 skrll }
1201 1.1 skrll
1202 1.1 skrll void
1203 1.1 skrll dwc2_childdet(device_t self, device_t child)
1204 1.1 skrll {
1205 1.1 skrll struct dwc2_softc *sc = device_private(self);
1206 1.1 skrll
1207 1.1 skrll sc = sc;
1208 1.1 skrll }
1209 1.1 skrll
1210 1.1 skrll int
1211 1.1 skrll dwc2_activate(device_t self, enum devact act)
1212 1.1 skrll {
1213 1.1 skrll struct dwc2_softc *sc = device_private(self);
1214 1.1 skrll
1215 1.1 skrll sc = sc;
1216 1.1 skrll
1217 1.1 skrll return 0;
1218 1.1 skrll }
1219 1.1 skrll
1220 1.1 skrll bool
1221 1.1 skrll dwc2_resume(device_t dv, const pmf_qual_t *qual)
1222 1.1 skrll {
1223 1.1 skrll struct dwc2_softc *sc = device_private(dv);
1224 1.1 skrll
1225 1.1 skrll sc = sc;
1226 1.1 skrll
1227 1.1 skrll return true;
1228 1.1 skrll }
1229 1.1 skrll
1230 1.1 skrll bool
1231 1.1 skrll dwc2_suspend(device_t dv, const pmf_qual_t *qual)
1232 1.1 skrll {
1233 1.1 skrll struct dwc2_softc *sc = device_private(dv);
1234 1.1 skrll
1235 1.1 skrll sc = sc;
1236 1.1 skrll
1237 1.1 skrll return true;
1238 1.1 skrll }
1239 1.1 skrll
1240 1.1 skrll /***********************************************************************/
1241 1.12 skrll int
1242 1.1 skrll dwc2_init(struct dwc2_softc *sc)
1243 1.1 skrll {
1244 1.1 skrll int err = 0;
1245 1.1 skrll
1246 1.59 ryo err = linux_workqueue_init();
1247 1.59 ryo if (err)
1248 1.59 ryo return err;
1249 1.59 ryo
1250 1.42 skrll sc->sc_bus.ub_hcpriv = sc;
1251 1.42 skrll sc->sc_bus.ub_revision = USBREV_2_0;
1252 1.42 skrll sc->sc_bus.ub_methods = &dwc2_bus_methods;
1253 1.42 skrll sc->sc_bus.ub_pipesize = sizeof(struct dwc2_pipe);
1254 1.42 skrll sc->sc_bus.ub_usedma = true;
1255 1.1 skrll sc->sc_hcdenabled = false;
1256 1.1 skrll
1257 1.1 skrll mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_SOFTUSB);
1258 1.1 skrll
1259 1.1 skrll TAILQ_INIT(&sc->sc_complete);
1260 1.1 skrll
1261 1.44 skrll sc->sc_rhc_si = softint_establish(SOFTINT_USB | SOFTINT_MPSAFE,
1262 1.1 skrll dwc2_rhc, sc);
1263 1.1 skrll
1264 1.1 skrll sc->sc_xferpool = pool_cache_init(sizeof(struct dwc2_xfer), 0, 0, 0,
1265 1.1 skrll "dwc2xfer", NULL, IPL_USB, NULL, NULL, NULL);
1266 1.1 skrll sc->sc_qhpool = pool_cache_init(sizeof(struct dwc2_qh), 0, 0, 0,
1267 1.1 skrll "dwc2qh", NULL, IPL_USB, NULL, NULL, NULL);
1268 1.1 skrll sc->sc_qtdpool = pool_cache_init(sizeof(struct dwc2_qtd), 0, 0, 0,
1269 1.1 skrll "dwc2qtd", NULL, IPL_USB, NULL, NULL, NULL);
1270 1.1 skrll
1271 1.1 skrll sc->sc_hsotg = kmem_zalloc(sizeof(struct dwc2_hsotg), KM_SLEEP);
1272 1.1 skrll sc->sc_hsotg->hsotg_sc = sc;
1273 1.1 skrll sc->sc_hsotg->dev = sc->sc_dev;
1274 1.1 skrll sc->sc_hcdenabled = true;
1275 1.1 skrll
1276 1.37 skrll struct dwc2_hsotg *hsotg = sc->sc_hsotg;
1277 1.37 skrll struct dwc2_core_params defparams;
1278 1.37 skrll int retval;
1279 1.37 skrll
1280 1.37 skrll if (sc->sc_params == NULL) {
1281 1.37 skrll /* Default all params to autodetect */
1282 1.37 skrll dwc2_set_all_params(&defparams, -1);
1283 1.37 skrll sc->sc_params = &defparams;
1284 1.37 skrll
1285 1.37 skrll /*
1286 1.37 skrll * Disable descriptor dma mode by default as the HW can support
1287 1.37 skrll * it, but does not support it for SPLIT transactions.
1288 1.37 skrll */
1289 1.37 skrll defparams.dma_desc_enable = 0;
1290 1.37 skrll }
1291 1.37 skrll hsotg->dr_mode = USB_DR_MODE_HOST;
1292 1.37 skrll
1293 1.37 skrll /* Detect config values from hardware */
1294 1.37 skrll retval = dwc2_get_hwparams(hsotg);
1295 1.37 skrll if (retval) {
1296 1.37 skrll goto fail2;
1297 1.37 skrll }
1298 1.37 skrll
1299 1.37 skrll hsotg->core_params = kmem_zalloc(sizeof(*hsotg->core_params), KM_SLEEP);
1300 1.37 skrll dwc2_set_all_params(hsotg->core_params, -1);
1301 1.37 skrll
1302 1.37 skrll /* Validate parameter values */
1303 1.37 skrll dwc2_set_parameters(hsotg, sc->sc_params);
1304 1.37 skrll
1305 1.37 skrll #if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
1306 1.37 skrll IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
1307 1.37 skrll if (hsotg->dr_mode != USB_DR_MODE_HOST) {
1308 1.37 skrll retval = dwc2_gadget_init(hsotg);
1309 1.37 skrll if (retval)
1310 1.37 skrll goto fail2;
1311 1.37 skrll hsotg->gadget_enabled = 1;
1312 1.37 skrll }
1313 1.37 skrll #endif
1314 1.37 skrll #if IS_ENABLED(CONFIG_USB_DWC2_HOST) || \
1315 1.37 skrll IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
1316 1.37 skrll if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
1317 1.37 skrll retval = dwc2_hcd_init(hsotg);
1318 1.37 skrll if (retval) {
1319 1.37 skrll if (hsotg->gadget_enabled)
1320 1.39 skrll dwc2_hsotg_remove(hsotg);
1321 1.37 skrll goto fail2;
1322 1.37 skrll }
1323 1.37 skrll hsotg->hcd_enabled = 1;
1324 1.37 skrll }
1325 1.37 skrll #endif
1326 1.37 skrll
1327 1.51 skrll uint32_t snpsid = hsotg->hw_params.snpsid;
1328 1.51 skrll aprint_verbose_dev(sc->sc_dev, "Core Release: %x.%x%x%x (snpsid=%x)\n",
1329 1.51 skrll snpsid >> 12 & 0xf, snpsid >> 8 & 0xf,
1330 1.51 skrll snpsid >> 4 & 0xf, snpsid & 0xf, snpsid);
1331 1.51 skrll
1332 1.1 skrll return 0;
1333 1.1 skrll
1334 1.1 skrll fail2:
1335 1.37 skrll err = -retval;
1336 1.1 skrll kmem_free(sc->sc_hsotg, sizeof(struct dwc2_hsotg));
1337 1.1 skrll softint_disestablish(sc->sc_rhc_si);
1338 1.1 skrll
1339 1.1 skrll return err;
1340 1.1 skrll }
1341 1.1 skrll
1342 1.1 skrll #if 0
1343 1.1 skrll /*
1344 1.1 skrll * curmode is a mode indication bit 0 = device, 1 = host
1345 1.1 skrll */
1346 1.1 skrll static const char * const intnames[32] = {
1347 1.1 skrll "curmode", "modemis", "otgint", "sof",
1348 1.1 skrll "rxflvl", "nptxfemp", "ginnakeff", "goutnakeff",
1349 1.1 skrll "ulpickint", "i2cint", "erlysusp", "usbsusp",
1350 1.1 skrll "usbrst", "enumdone", "isooutdrop", "eopf",
1351 1.1 skrll "restore_done", "epmis", "iepint", "oepint",
1352 1.1 skrll "incompisoin", "incomplp", "fetsusp", "resetdet",
1353 1.1 skrll "prtint", "hchint", "ptxfemp", "lpm",
1354 1.1 skrll "conidstschng", "disconnint", "sessreqint", "wkupint"
1355 1.1 skrll };
1356 1.1 skrll
1357 1.1 skrll
1358 1.1 skrll /***********************************************************************/
1359 1.1 skrll
1360 1.1 skrll #endif
1361 1.1 skrll
1362 1.1 skrll void dwc2_host_hub_info(struct dwc2_hsotg *hsotg, void *context, int *hub_addr,
1363 1.1 skrll int *hub_port)
1364 1.1 skrll {
1365 1.42 skrll struct usbd_xfer *xfer = context;
1366 1.1 skrll struct dwc2_pipe *dpipe = DWC2_XFER2DPIPE(xfer);
1367 1.42 skrll struct usbd_device *dev = dpipe->pipe.up_dev;
1368 1.1 skrll
1369 1.42 skrll *hub_addr = dev->ud_myhsport->up_parent->ud_addr;
1370 1.42 skrll *hub_port = dev->ud_myhsport->up_portno;
1371 1.1 skrll }
1372 1.1 skrll
1373 1.1 skrll int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context)
1374 1.1 skrll {
1375 1.42 skrll struct usbd_xfer *xfer = context;
1376 1.1 skrll struct dwc2_pipe *dpipe = DWC2_XFER2DPIPE(xfer);
1377 1.42 skrll struct usbd_device *dev = dpipe->pipe.up_dev;
1378 1.1 skrll
1379 1.42 skrll return dev->ud_speed;
1380 1.1 skrll }
1381 1.1 skrll
1382 1.1 skrll /*
1383 1.1 skrll * Sets the final status of an URB and returns it to the upper layer. Any
1384 1.1 skrll * required cleanup of the URB is performed.
1385 1.1 skrll *
1386 1.1 skrll * Must be called with interrupt disabled and spinlock held
1387 1.1 skrll */
1388 1.1 skrll void dwc2_host_complete(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd,
1389 1.33 skrll int status)
1390 1.1 skrll {
1391 1.42 skrll struct usbd_xfer *xfer;
1392 1.1 skrll struct dwc2_xfer *dxfer;
1393 1.1 skrll struct dwc2_softc *sc;
1394 1.1 skrll usb_endpoint_descriptor_t *ed;
1395 1.1 skrll uint8_t xfertype;
1396 1.1 skrll
1397 1.67 riastrad KASSERT(mutex_owned(&hsotg->lock));
1398 1.67 riastrad
1399 1.1 skrll if (!qtd) {
1400 1.1 skrll dev_dbg(hsotg->dev, "## %s: qtd is NULL ##\n", __func__);
1401 1.1 skrll return;
1402 1.1 skrll }
1403 1.1 skrll
1404 1.1 skrll if (!qtd->urb) {
1405 1.1 skrll dev_dbg(hsotg->dev, "## %s: qtd->urb is NULL ##\n", __func__);
1406 1.1 skrll return;
1407 1.1 skrll }
1408 1.1 skrll
1409 1.1 skrll xfer = qtd->urb->priv;
1410 1.1 skrll if (!xfer) {
1411 1.1 skrll dev_dbg(hsotg->dev, "## %s: urb->priv is NULL ##\n", __func__);
1412 1.1 skrll return;
1413 1.1 skrll }
1414 1.1 skrll
1415 1.1 skrll dxfer = DWC2_XFER2DXFER(xfer);
1416 1.1 skrll sc = DWC2_XFER2SC(xfer);
1417 1.42 skrll ed = xfer->ux_pipe->up_endpoint->ue_edesc;
1418 1.1 skrll xfertype = UE_GET_XFERTYPE(ed->bmAttributes);
1419 1.1 skrll
1420 1.39 skrll struct dwc2_hcd_urb *urb = qtd->urb;
1421 1.42 skrll xfer->ux_actlen = dwc2_hcd_urb_get_actual_length(urb);
1422 1.1 skrll
1423 1.42 skrll DPRINTFN(3, "xfer=%p actlen=%d\n", xfer, xfer->ux_actlen);
1424 1.24 skrll
1425 1.1 skrll if (xfertype == UE_ISOCHRONOUS) {
1426 1.42 skrll xfer->ux_actlen = 0;
1427 1.63 skrll for (size_t i = 0; i < xfer->ux_nframes; ++i) {
1428 1.42 skrll xfer->ux_frlengths[i] =
1429 1.1 skrll dwc2_hcd_urb_get_iso_desc_actual_length(
1430 1.39 skrll urb, i);
1431 1.63 skrll DPRINTFN(1, "xfer=%p frame=%zu length=%d\n", xfer, i,
1432 1.63 skrll xfer->ux_frlengths[i]);
1433 1.42 skrll xfer->ux_actlen += xfer->ux_frlengths[i];
1434 1.1 skrll }
1435 1.63 skrll DPRINTFN(1, "xfer=%p actlen=%d (isoc)\n", xfer, xfer->ux_actlen);
1436 1.1 skrll }
1437 1.7 skrll
1438 1.39 skrll if (xfertype == UE_ISOCHRONOUS && dbg_perio()) {
1439 1.63 skrll for (size_t i = 0; i < xfer->ux_nframes; i++)
1440 1.63 skrll dev_vdbg(hsotg->dev, " ISO Desc %zu status %d\n",
1441 1.39 skrll i, urb->iso_descs[i].status);
1442 1.39 skrll }
1443 1.39 skrll
1444 1.1 skrll if (!status) {
1445 1.42 skrll if (!(xfer->ux_flags & USBD_SHORT_XFER_OK) &&
1446 1.42 skrll xfer->ux_actlen < xfer->ux_length)
1447 1.1 skrll status = -EIO;
1448 1.1 skrll }
1449 1.1 skrll
1450 1.1 skrll switch (status) {
1451 1.1 skrll case 0:
1452 1.67 riastrad dxfer->intr_status = USBD_NORMAL_COMPLETION;
1453 1.1 skrll break;
1454 1.1 skrll case -EPIPE:
1455 1.67 riastrad dxfer->intr_status = USBD_STALLED;
1456 1.1 skrll break;
1457 1.1 skrll case -EPROTO:
1458 1.67 riastrad dxfer->intr_status = USBD_INVAL;
1459 1.1 skrll break;
1460 1.1 skrll case -EIO:
1461 1.67 riastrad dxfer->intr_status = USBD_IOERROR;
1462 1.1 skrll break;
1463 1.1 skrll case -EOVERFLOW:
1464 1.67 riastrad dxfer->intr_status = USBD_IOERROR;
1465 1.1 skrll break;
1466 1.1 skrll default:
1467 1.67 riastrad dxfer->intr_status = USBD_IOERROR;
1468 1.1 skrll printf("%s: unknown error status %d\n", __func__, status);
1469 1.1 skrll }
1470 1.1 skrll
1471 1.67 riastrad if (dxfer->intr_status == USBD_NORMAL_COMPLETION) {
1472 1.34 skrll /*
1473 1.34 skrll * control transfers with no data phase don't touch dmabuf, but
1474 1.34 skrll * everything else does.
1475 1.34 skrll */
1476 1.34 skrll if (!(xfertype == UE_CONTROL &&
1477 1.50 rin UGETW(xfer->ux_request.wLength) == 0) &&
1478 1.50 rin xfer->ux_actlen > 0 /* XXX PR/53503 */
1479 1.50 rin ) {
1480 1.35 skrll int rd = usbd_xfer_isread(xfer);
1481 1.35 skrll
1482 1.42 skrll usb_syncmem(&xfer->ux_dmabuf, 0, xfer->ux_actlen,
1483 1.34 skrll rd ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
1484 1.34 skrll }
1485 1.34 skrll }
1486 1.34 skrll
1487 1.1 skrll if (xfertype == UE_ISOCHRONOUS ||
1488 1.1 skrll xfertype == UE_INTERRUPT) {
1489 1.7 skrll struct dwc2_pipe *dpipe = DWC2_XFER2DPIPE(xfer);
1490 1.1 skrll
1491 1.7 skrll dwc2_free_bus_bandwidth(hsotg,
1492 1.7 skrll dwc2_hcd_get_ep_bandwidth(hsotg, dpipe),
1493 1.7 skrll xfer);
1494 1.1 skrll }
1495 1.1 skrll
1496 1.1 skrll qtd->urb = NULL;
1497 1.5 skrll KASSERT(mutex_owned(&hsotg->lock));
1498 1.1 skrll
1499 1.1 skrll TAILQ_INSERT_TAIL(&sc->sc_complete, dxfer, xnext);
1500 1.1 skrll
1501 1.21 skrll mutex_spin_exit(&hsotg->lock);
1502 1.1 skrll usb_schedsoftintr(&sc->sc_bus);
1503 1.21 skrll mutex_spin_enter(&hsotg->lock);
1504 1.1 skrll }
1505 1.1 skrll
1506 1.1 skrll
1507 1.1 skrll int
1508 1.1 skrll _dwc2_hcd_start(struct dwc2_hsotg *hsotg)
1509 1.1 skrll {
1510 1.1 skrll dev_dbg(hsotg->dev, "DWC OTG HCD START\n");
1511 1.1 skrll
1512 1.3 skrll mutex_spin_enter(&hsotg->lock);
1513 1.1 skrll
1514 1.39 skrll hsotg->lx_state = DWC2_L0;
1515 1.40 skrll
1516 1.39 skrll if (dwc2_is_device_mode(hsotg)) {
1517 1.39 skrll mutex_spin_exit(&hsotg->lock);
1518 1.39 skrll return 0; /* why 0 ?? */
1519 1.39 skrll }
1520 1.39 skrll
1521 1.1 skrll dwc2_hcd_reinit(hsotg);
1522 1.1 skrll
1523 1.3 skrll mutex_spin_exit(&hsotg->lock);
1524 1.1 skrll return 0;
1525 1.1 skrll }
1526 1.6 skrll
1527 1.6 skrll int dwc2_host_is_b_hnp_enabled(struct dwc2_hsotg *hsotg)
1528 1.6 skrll {
1529 1.6 skrll
1530 1.6 skrll return false;
1531 1.6 skrll }
1532