xref: /src/sys/external/bsd/dwc2/dwc2.h

/*	$NetBSD: dwc2.h,v 1.6 2015/08/30 12:26:29 skrll Exp $	*/

/*-
 * Copyright (c) 2013 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Nick Hudson
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef _EXTERNAL_BSD_DWC2_DWC2_H_
#define _EXTERNAL_BSD_DWC2_DWC2_H_

#include <sys/param.h>

#include <sys/callout.h>
#include <sys/kernel.h>
#include <sys/workqueue.h>

#include <linux/list.h>

#include "opt_usb.h"
// #define VERBOSE_DEBUG
// #define DWC2_DUMP_FRREM
// #define CONFIG_USB_DWC2_TRACK_MISSED_SOFS

typedef int irqreturn_t;
#define	IRQ_NONE 0
#define IRQ_HANDLED 1

#define	u8	uint8_t
#define	u16	uint16_t
#define	s16	int16_t
#define	u32	uint32_t
#define	u64	uint64_t

#define	dma_addr_t	bus_addr_t

#define DWC2_READ_4(hsotg, reg) \
    bus_space_read_4((hsotg)->hsotg_sc->sc_iot, (hsotg)->hsotg_sc->sc_ioh, (reg))
#define DWC2_WRITE_4(hsotg, reg, data)  \
    bus_space_write_4((hsotg)->hsotg_sc->sc_iot, (hsotg)->hsotg_sc->sc_ioh, (reg), (data));

#ifdef DWC2_DEBUG
extern int dwc2debug;
#define WARN_ON(x)	KASSERT(!(x))

#define	dev_info(d,fmt,...) do {			\
	printf("%s: " fmt, device_xname(d), 		\
	    ## __VA_ARGS__);				\
} while (0)
#define	dev_warn(d,fmt,...) do {			\
	printf("%s: " fmt, device_xname(d), 		\
	    ## __VA_ARGS__);				\
} while (0)
#define	dev_err(d,fmt,...) do {				\
	printf("%s: " fmt, device_xname(d), 		\
	    ## __VA_ARGS__);				\
} while (0)
#define	dev_dbg(d,fmt,...) do {				\
	if (dwc2debug >= 1) {				\
	    printf("%s: " fmt, device_xname(d), 	\
		    ## __VA_ARGS__);			\
	}						\
} while (0)
#define	dev_vdbg(d,fmt,...) do {			\
	if (dwc2debug >= 2) {				\
	    printf("%s: " fmt, device_xname(d), 	\
		    ## __VA_ARGS__);			\
	}						\
} while (0)
#else
#define WARN_ON(x)
#define	dev_info(...) do { } while (0)
#define	dev_warn(...) do { } while (0)
#define	dev_err(...) do { } while (0)
#define	dev_dbg(...) do { } while (0)
#define	dev_vdbg(...) do { } while (0)
#endif

#define jiffies			hardclock_ticks
#define msecs_to_jiffies	mstohz

#define gfp_t		int
#define GFP_KERNEL	 KM_SLEEP
#define GFP_ATOMIC	 KM_NOSLEEP

enum usb_otg_state {
	OTG_STATE_RESERVED = 0,

	OTG_STATE_A_HOST,
	OTG_STATE_A_PERIPHERAL,
	OTG_STATE_A_SUSPEND,
	OTG_STATE_B_HOST,
	OTG_STATE_B_PERIPHERAL,
};

#define usleep_range(l, u)	do { DELAY(u); } while (0)

#define spinlock_t		kmutex_t
#define spin_lock_init(lock)	mutex_init(lock, MUTEX_DEFAULT, IPL_VM)
#define	spin_lock(l)		do { mutex_spin_enter(l); } while (0)
#define	spin_unlock(l)		do { mutex_spin_exit(l); } while (0)

#define	spin_lock_irqsave(l, f)		\
	do { mutex_spin_enter(l); (void)(f); } while (0)

#define	spin_unlock_irqrestore(l, f)	\
	do { mutex_spin_exit(l); (void)(f); } while (0)

#define	IRQ_RETVAL(r)	(r)

#define	USB_ENDPOINT_XFER_CONTROL	UE_CONTROL		/* 0 */
#define	USB_ENDPOINT_XFER_ISOC		UE_ISOCHRONOUS		/* 1 */
#define	USB_ENDPOINT_XFER_BULK		UE_BULK			/* 2 */
#define	USB_ENDPOINT_XFER_INT		UE_INTERRUPT		/* 3 */

#define USB_DIR_IN			UE_DIR_IN
#define USB_DIR_OUT			UE_DIR_OUT

#define	USB_PORT_FEAT_CONNECTION	UHF_PORT_CONNECTION
#define	USB_PORT_FEAT_ENABLE		UHF_PORT_ENABLE
#define	USB_PORT_FEAT_SUSPEND		UHF_PORT_SUSPEND
#define	USB_PORT_FEAT_OVER_CURRENT	UHF_PORT_OVER_CURRENT
#define	USB_PORT_FEAT_RESET		UHF_PORT_RESET
// #define	USB_PORT_FEAT_L1		5	/* L1 suspend */
#define	USB_PORT_FEAT_POWER		UHF_PORT_POWER
#define	USB_PORT_FEAT_LOWSPEED		UHF_PORT_LOW_SPEED
#define	USB_PORT_FEAT_C_CONNECTION	UHF_C_PORT_CONNECTION
#define	USB_PORT_FEAT_C_ENABLE		UHF_C_PORT_ENABLE
#define	USB_PORT_FEAT_C_SUSPEND		UHF_C_PORT_SUSPEND
#define	USB_PORT_FEAT_C_OVER_CURRENT	UHF_C_PORT_OVER_CURRENT
#define	USB_PORT_FEAT_C_RESET		UHF_C_PORT_RESET
#define	USB_PORT_FEAT_TEST              UHF_PORT_TEST
#define	USB_PORT_FEAT_INDICATOR         UHF_PORT_INDICATOR
#define	USB_PORT_FEAT_C_PORT_L1         UHF_C_PORT_L1

#define	C_HUB_LOCAL_POWER		UHF_C_HUB_LOCAL_POWER
#define	C_HUB_OVER_CURRENT		UHF_C_HUB_OVER_CURRENT

#define USB_REQ_GET_STATUS		UR_GET_STATUS
#define USB_REQ_CLEAR_FEATURE		UR_CLEAR_FEATURE
#define USB_REQ_SET_FEATURE		UR_SET_FEATURE
#define USB_REQ_GET_DESCRIPTOR		UR_GET_DESCRIPTOR

#define	ClearHubFeature		((UT_WRITE_CLASS_DEVICE << 8) | USB_REQ_CLEAR_FEATURE)
#define	ClearPortFeature	((UT_WRITE_CLASS_OTHER << 8) | USB_REQ_CLEAR_FEATURE)
#define	GetHubDescriptor	((UT_READ_CLASS_DEVICE << 8) | USB_REQ_GET_DESCRIPTOR)
#define	GetHubStatus		((UT_READ_CLASS_DEVICE << 8) | USB_REQ_GET_STATUS)
#define	GetPortStatus		((UT_READ_CLASS_OTHER << 8) | USB_REQ_GET_STATUS)
#define	SetHubFeature		((UT_WRITE_CLASS_DEVICE << 8) | USB_REQ_SET_FEATURE)
#define	SetPortFeature		((UT_WRITE_CLASS_OTHER << 8) | USB_REQ_SET_FEATURE)

#define	USB_PORT_STAT_CONNECTION	UPS_CURRENT_CONNECT_STATUS
#define	USB_PORT_STAT_ENABLE		UPS_PORT_ENABLED
#define	USB_PORT_STAT_SUSPEND		UPS_SUSPEND
#define	USB_PORT_STAT_OVERCURRENT	UPS_OVERCURRENT_INDICATOR
#define	USB_PORT_STAT_RESET		UPS_RESET
#define	USB_PORT_STAT_L1		UPS_PORT_L1
#define	USB_PORT_STAT_POWER		UPS_PORT_POWER
#define	USB_PORT_STAT_LOW_SPEED		UPS_LOW_SPEED
#define	USB_PORT_STAT_HIGH_SPEED        UPS_HIGH_SPEED
#define	USB_PORT_STAT_TEST              UPS_PORT_TEST
#define	USB_PORT_STAT_INDICATOR         UPS_PORT_INDICATOR

#define	USB_PORT_STAT_C_CONNECTION	UPS_C_CONNECT_STATUS
#define	USB_PORT_STAT_C_ENABLE		UPS_C_PORT_ENABLED
#define	USB_PORT_STAT_C_SUSPEND		UPS_C_SUSPEND
#define	USB_PORT_STAT_C_OVERCURRENT	UPS_C_OVERCURRENT_INDICATOR
#define	USB_PORT_STAT_C_RESET		UPS_C_PORT_RESET
#define	USB_PORT_STAT_C_L1		UPS_C_PORT_L1

static inline void
udelay(unsigned long usecs)
{
	DELAY(usecs);
}

#define	EREMOTEIO	EIO
#define	ECOMM		EIO

#define NS_TO_US(ns)	((ns + 500L) / 1000L)

void dw_callout(void *);
void dwc2_worker(struct work *, void *);

struct delayed_work {
	struct work work;
	struct callout dw_timer;

	struct workqueue *dw_wq;
};

static inline void
INIT_DELAYED_WORK(struct delayed_work *dw, void (*fn)(struct work *))
{
	callout_init(&dw->dw_timer, CALLOUT_MPSAFE);
}

static inline void
queue_delayed_work(struct workqueue *wq, struct delayed_work *dw, int j)
{
	callout_reset(&dw->dw_timer, j, dw_callout, dw);
}

#endif