ah.h revision 1.1
1 /* 2 * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting 3 * Copyright (c) 2002-2008 Atheros Communications, Inc. 4 * 5 * Permission to use, copy, modify, and/or distribute this software for any 6 * purpose with or without fee is hereby granted, provided that the above 7 * copyright notice and this permission notice appear in all copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 * 17 * $Id: ah.h,v 1.1 2008/12/11 04:46:23 alc Exp $ 18 */ 19 20 #ifndef _ATH_AH_H_ 21 #define _ATH_AH_H_ 22 /* 23 * Atheros Hardware Access Layer 24 * 25 * Clients of the HAL call ath_hal_attach to obtain a reference to an ath_hal 26 * structure for use with the device. Hardware-related operations that 27 * follow must call back into the HAL through interface, supplying the 28 * reference as the first parameter. 29 */ 30 31 #include "ah_osdep.h" 32 33 /* 34 * __ahdecl is analogous to _cdecl; it defines the calling 35 * convention used within the HAL. For most systems this 36 * can just default to be empty and the compiler will (should) 37 * use _cdecl. For systems where _cdecl is not compatible this 38 * must be defined. See linux/ah_osdep.h for an example. 39 */ 40 #ifndef __ahdecl 41 #define __ahdecl 42 #endif 43 44 /* 45 * Status codes that may be returned by the HAL. Note that 46 * interfaces that return a status code set it only when an 47 * error occurs--i.e. you cannot check it for success. 48 */ 49 typedef enum { 50 HAL_OK = 0, /* No error */ 51 HAL_ENXIO = 1, /* No hardware present */ 52 HAL_ENOMEM = 2, /* Memory allocation failed */ 53 HAL_EIO = 3, /* Hardware didn't respond as expected */ 54 HAL_EEMAGIC = 4, /* EEPROM magic number invalid */ 55 HAL_EEVERSION = 5, /* EEPROM version invalid */ 56 HAL_EELOCKED = 6, /* EEPROM unreadable */ 57 HAL_EEBADSUM = 7, /* EEPROM checksum invalid */ 58 HAL_EEREAD = 8, /* EEPROM read problem */ 59 HAL_EEBADMAC = 9, /* EEPROM mac address invalid */ 60 HAL_EESIZE = 10, /* EEPROM size not supported */ 61 HAL_EEWRITE = 11, /* Attempt to change write-locked EEPROM */ 62 HAL_EINVAL = 12, /* Invalid parameter to function */ 63 HAL_ENOTSUPP = 13, /* Hardware revision not supported */ 64 HAL_ESELFTEST = 14, /* Hardware self-test failed */ 65 HAL_EINPROGRESS = 15, /* Operation incomplete */ 66 } HAL_STATUS; 67 68 typedef enum { 69 AH_FALSE = 0, /* NB: lots of code assumes false is zero */ 70 AH_TRUE = 1, 71 } HAL_BOOL; 72 73 typedef enum { 74 HAL_CAP_REG_DMN = 0, /* current regulatory domain */ 75 HAL_CAP_CIPHER = 1, /* hardware supports cipher */ 76 HAL_CAP_TKIP_MIC = 2, /* handle TKIP MIC in hardware */ 77 HAL_CAP_TKIP_SPLIT = 3, /* hardware TKIP uses split keys */ 78 HAL_CAP_PHYCOUNTERS = 4, /* hardware PHY error counters */ 79 HAL_CAP_DIVERSITY = 5, /* hardware supports fast diversity */ 80 HAL_CAP_KEYCACHE_SIZE = 6, /* number of entries in key cache */ 81 HAL_CAP_NUM_TXQUEUES = 7, /* number of hardware xmit queues */ 82 HAL_CAP_VEOL = 9, /* hardware supports virtual EOL */ 83 HAL_CAP_PSPOLL = 10, /* hardware has working PS-Poll support */ 84 HAL_CAP_DIAG = 11, /* hardware diagnostic support */ 85 HAL_CAP_COMPRESSION = 12, /* hardware supports compression */ 86 HAL_CAP_BURST = 13, /* hardware supports packet bursting */ 87 HAL_CAP_FASTFRAME = 14, /* hardware supoprts fast frames */ 88 HAL_CAP_TXPOW = 15, /* global tx power limit */ 89 HAL_CAP_TPC = 16, /* per-packet tx power control */ 90 HAL_CAP_PHYDIAG = 17, /* hardware phy error diagnostic */ 91 HAL_CAP_BSSIDMASK = 18, /* hardware supports bssid mask */ 92 HAL_CAP_MCAST_KEYSRCH = 19, /* hardware has multicast key search */ 93 HAL_CAP_TSF_ADJUST = 20, /* hardware has beacon tsf adjust */ 94 /* 21 was HAL_CAP_XR */ 95 HAL_CAP_WME_TKIPMIC = 22, /* hardware can support TKIP MIC when WMM is turned on */ 96 /* 23 was HAL_CAP_CHAN_HALFRATE */ 97 /* 24 was HAL_CAP_CHAN_QUARTERRATE */ 98 HAL_CAP_RFSILENT = 25, /* hardware has rfsilent support */ 99 HAL_CAP_TPC_ACK = 26, /* ack txpower with per-packet tpc */ 100 HAL_CAP_TPC_CTS = 27, /* cts txpower with per-packet tpc */ 101 HAL_CAP_11D = 28, /* 11d beacon support for changing cc */ 102 HAL_CAP_INTMIT = 29, /* interference mitigation */ 103 HAL_CAP_RXORN_FATAL = 30, /* HAL_INT_RXORN treated as fatal */ 104 HAL_CAP_HT = 31, /* hardware can support HT */ 105 HAL_CAP_TX_CHAINMASK = 32, /* mask of TX chains supported */ 106 HAL_CAP_RX_CHAINMASK = 33, /* mask of RX chains supported */ 107 HAL_CAP_RXTSTAMP_PREC = 34, /* rx desc tstamp precision (bits) */ 108 HAL_CAP_BB_HANG = 35, /* can baseband hang */ 109 HAL_CAP_MAC_HANG = 36, /* can MAC hang */ 110 } HAL_CAPABILITY_TYPE; 111 112 /* 113 * "States" for setting the LED. These correspond to 114 * the possible 802.11 operational states and there may 115 * be a many-to-one mapping between these states and the 116 * actual hardware state for the LED's (i.e. the hardware 117 * may have fewer states). 118 */ 119 typedef enum { 120 HAL_LED_INIT = 0, 121 HAL_LED_SCAN = 1, 122 HAL_LED_AUTH = 2, 123 HAL_LED_ASSOC = 3, 124 HAL_LED_RUN = 4 125 } HAL_LED_STATE; 126 127 /* 128 * Transmit queue types/numbers. These are used to tag 129 * each transmit queue in the hardware and to identify a set 130 * of transmit queues for operations such as start/stop dma. 131 */ 132 typedef enum { 133 HAL_TX_QUEUE_INACTIVE = 0, /* queue is inactive/unused */ 134 HAL_TX_QUEUE_DATA = 1, /* data xmit q's */ 135 HAL_TX_QUEUE_BEACON = 2, /* beacon xmit q */ 136 HAL_TX_QUEUE_CAB = 3, /* "crap after beacon" xmit q */ 137 HAL_TX_QUEUE_UAPSD = 4, /* u-apsd power save xmit q */ 138 } HAL_TX_QUEUE; 139 140 #define HAL_NUM_TX_QUEUES 10 /* max possible # of queues */ 141 142 /* 143 * Transmit queue subtype. These map directly to 144 * WME Access Categories (except for UPSD). Refer 145 * to Table 5 of the WME spec. 146 */ 147 typedef enum { 148 HAL_WME_AC_BK = 0, /* background access category */ 149 HAL_WME_AC_BE = 1, /* best effort access category*/ 150 HAL_WME_AC_VI = 2, /* video access category */ 151 HAL_WME_AC_VO = 3, /* voice access category */ 152 HAL_WME_UPSD = 4, /* uplink power save */ 153 } HAL_TX_QUEUE_SUBTYPE; 154 155 /* 156 * Transmit queue flags that control various 157 * operational parameters. 158 */ 159 typedef enum { 160 /* 161 * Per queue interrupt enables. When set the associated 162 * interrupt may be delivered for packets sent through 163 * the queue. Without these enabled no interrupts will 164 * be delivered for transmits through the queue. 165 */ 166 HAL_TXQ_TXOKINT_ENABLE = 0x0001, /* enable TXOK interrupt */ 167 HAL_TXQ_TXERRINT_ENABLE = 0x0001, /* enable TXERR interrupt */ 168 HAL_TXQ_TXDESCINT_ENABLE = 0x0002, /* enable TXDESC interrupt */ 169 HAL_TXQ_TXEOLINT_ENABLE = 0x0004, /* enable TXEOL interrupt */ 170 HAL_TXQ_TXURNINT_ENABLE = 0x0008, /* enable TXURN interrupt */ 171 /* 172 * Enable hardware compression for packets sent through 173 * the queue. The compression buffer must be setup and 174 * packets must have a key entry marked in the tx descriptor. 175 */ 176 HAL_TXQ_COMPRESSION_ENABLE = 0x0010, /* enable h/w compression */ 177 /* 178 * Disable queue when veol is hit or ready time expires. 179 * By default the queue is disabled only on reaching the 180 * physical end of queue (i.e. a null link ptr in the 181 * descriptor chain). 182 */ 183 HAL_TXQ_RDYTIME_EXP_POLICY_ENABLE = 0x0020, 184 /* 185 * Schedule frames on delivery of a DBA (DMA Beacon Alert) 186 * event. Frames will be transmitted only when this timer 187 * fires, e.g to transmit a beacon in ap or adhoc modes. 188 */ 189 HAL_TXQ_DBA_GATED = 0x0040, /* schedule based on DBA */ 190 /* 191 * Each transmit queue has a counter that is incremented 192 * each time the queue is enabled and decremented when 193 * the list of frames to transmit is traversed (or when 194 * the ready time for the queue expires). This counter 195 * must be non-zero for frames to be scheduled for 196 * transmission. The following controls disable bumping 197 * this counter under certain conditions. Typically this 198 * is used to gate frames based on the contents of another 199 * queue (e.g. CAB traffic may only follow a beacon frame). 200 * These are meaningful only when frames are scheduled 201 * with a non-ASAP policy (e.g. DBA-gated). 202 */ 203 HAL_TXQ_CBR_DIS_QEMPTY = 0x0080, /* disable on this q empty */ 204 HAL_TXQ_CBR_DIS_BEMPTY = 0x0100, /* disable on beacon q empty */ 205 206 /* 207 * Fragment burst backoff policy. Normally the no backoff 208 * is done after a successful transmission, the next fragment 209 * is sent at SIFS. If this flag is set backoff is done 210 * after each fragment, regardless whether it was ack'd or 211 * not, after the backoff count reaches zero a normal channel 212 * access procedure is done before the next transmit (i.e. 213 * wait AIFS instead of SIFS). 214 */ 215 HAL_TXQ_FRAG_BURST_BACKOFF_ENABLE = 0x00800000, 216 /* 217 * Disable post-tx backoff following each frame. 218 */ 219 HAL_TXQ_BACKOFF_DISABLE = 0x00010000, /* disable post backoff */ 220 /* 221 * DCU arbiter lockout control. This controls how 222 * lower priority tx queues are handled with respect to 223 * to a specific queue when multiple queues have frames 224 * to send. No lockout means lower priority queues arbitrate 225 * concurrently with this queue. Intra-frame lockout 226 * means lower priority queues are locked out until the 227 * current frame transmits (e.g. including backoffs and bursting). 228 * Global lockout means nothing lower can arbitrary so 229 * long as there is traffic activity on this queue (frames, 230 * backoff, etc). 231 */ 232 HAL_TXQ_ARB_LOCKOUT_INTRA = 0x00020000, /* intra-frame lockout */ 233 HAL_TXQ_ARB_LOCKOUT_GLOBAL = 0x00040000, /* full lockout s */ 234 235 HAL_TXQ_IGNORE_VIRTCOL = 0x00080000, /* ignore virt collisions */ 236 HAL_TXQ_SEQNUM_INC_DIS = 0x00100000, /* disable seqnum increment */ 237 } HAL_TX_QUEUE_FLAGS; 238 239 typedef struct { 240 uint32_t tqi_ver; /* hal TXQ version */ 241 HAL_TX_QUEUE_SUBTYPE tqi_subtype; /* subtype if applicable */ 242 HAL_TX_QUEUE_FLAGS tqi_qflags; /* flags (see above) */ 243 uint32_t tqi_priority; /* (not used) */ 244 uint32_t tqi_aifs; /* aifs */ 245 uint32_t tqi_cwmin; /* cwMin */ 246 uint32_t tqi_cwmax; /* cwMax */ 247 uint16_t tqi_shretry; /* rts retry limit */ 248 uint16_t tqi_lgretry; /* long retry limit (not used)*/ 249 uint32_t tqi_cbrPeriod; /* CBR period (us) */ 250 uint32_t tqi_cbrOverflowLimit; /* threshold for CBROVF int */ 251 uint32_t tqi_burstTime; /* max burst duration (us) */ 252 uint32_t tqi_readyTime; /* frame schedule time (us) */ 253 uint32_t tqi_compBuf; /* comp buffer phys addr */ 254 } HAL_TXQ_INFO; 255 256 #define HAL_TQI_NONVAL 0xffff 257 258 /* token to use for aifs, cwmin, cwmax */ 259 #define HAL_TXQ_USEDEFAULT ((uint32_t) -1) 260 261 /* compression definitions */ 262 #define HAL_COMP_BUF_MAX_SIZE 9216 /* 9K */ 263 #define HAL_COMP_BUF_ALIGN_SIZE 512 264 265 /* 266 * Transmit packet types. This belongs in ah_desc.h, but 267 * is here so we can give a proper type to various parameters 268 * (and not require everyone include the file). 269 * 270 * NB: These values are intentionally assigned for 271 * direct use when setting up h/w descriptors. 272 */ 273 typedef enum { 274 HAL_PKT_TYPE_NORMAL = 0, 275 HAL_PKT_TYPE_ATIM = 1, 276 HAL_PKT_TYPE_PSPOLL = 2, 277 HAL_PKT_TYPE_BEACON = 3, 278 HAL_PKT_TYPE_PROBE_RESP = 4, 279 HAL_PKT_TYPE_CHIRP = 5, 280 HAL_PKT_TYPE_GRP_POLL = 6, 281 HAL_PKT_TYPE_AMPDU = 7, 282 } HAL_PKT_TYPE; 283 284 /* Rx Filter Frame Types */ 285 typedef enum { 286 HAL_RX_FILTER_UCAST = 0x00000001, /* Allow unicast frames */ 287 HAL_RX_FILTER_MCAST = 0x00000002, /* Allow multicast frames */ 288 HAL_RX_FILTER_BCAST = 0x00000004, /* Allow broadcast frames */ 289 HAL_RX_FILTER_CONTROL = 0x00000008, /* Allow control frames */ 290 HAL_RX_FILTER_BEACON = 0x00000010, /* Allow beacon frames */ 291 HAL_RX_FILTER_PROM = 0x00000020, /* Promiscuous mode */ 292 HAL_RX_FILTER_PROBEREQ = 0x00000080, /* Allow probe request frames */ 293 HAL_RX_FILTER_PHYERR = 0x00000100, /* Allow phy errors */ 294 HAL_RX_FILTER_PHYRADAR = 0x00000200, /* Allow phy radar errors */ 295 HAL_RX_FILTER_COMPBAR = 0x00000400, /* Allow compressed BAR */ 296 } HAL_RX_FILTER; 297 298 typedef enum { 299 HAL_PM_AWAKE = 0, 300 HAL_PM_FULL_SLEEP = 1, 301 HAL_PM_NETWORK_SLEEP = 2, 302 HAL_PM_UNDEFINED = 3 303 } HAL_POWER_MODE; 304 305 /* 306 * NOTE WELL: 307 * These are mapped to take advantage of the common locations for many of 308 * the bits on all of the currently supported MAC chips. This is to make 309 * the ISR as efficient as possible, while still abstracting HW differences. 310 * When new hardware breaks this commonality this enumerated type, as well 311 * as the HAL functions using it, must be modified. All values are directly 312 * mapped unless commented otherwise. 313 */ 314 typedef enum { 315 HAL_INT_RX = 0x00000001, /* Non-common mapping */ 316 HAL_INT_RXDESC = 0x00000002, 317 HAL_INT_RXNOFRM = 0x00000008, 318 HAL_INT_RXEOL = 0x00000010, 319 HAL_INT_RXORN = 0x00000020, 320 HAL_INT_TX = 0x00000040, /* Non-common mapping */ 321 HAL_INT_TXDESC = 0x00000080, 322 HAL_INT_TXURN = 0x00000800, 323 HAL_INT_MIB = 0x00001000, 324 HAL_INT_RXPHY = 0x00004000, 325 HAL_INT_RXKCM = 0x00008000, 326 HAL_INT_SWBA = 0x00010000, 327 HAL_INT_BMISS = 0x00040000, 328 HAL_INT_BNR = 0x00100000, /* Non-common mapping */ 329 HAL_INT_TIM = 0x00200000, /* Non-common mapping */ 330 HAL_INT_DTIM = 0x00400000, /* Non-common mapping */ 331 HAL_INT_DTIMSYNC= 0x00800000, /* Non-common mapping */ 332 HAL_INT_GPIO = 0x01000000, 333 HAL_INT_CABEND = 0x02000000, /* Non-common mapping */ 334 HAL_INT_TSFOOR = 0x04000000, /* Non-common mapping */ 335 HAL_INT_CST = 0x10000000, /* Non-common mapping */ 336 HAL_INT_GTT = 0x20000000, /* Non-common mapping */ 337 HAL_INT_FATAL = 0x40000000, /* Non-common mapping */ 338 #define HAL_INT_GLOBAL 0x80000000 /* Set/clear IER */ 339 HAL_INT_BMISC = HAL_INT_TIM 340 | HAL_INT_DTIM 341 | HAL_INT_DTIMSYNC 342 | HAL_INT_CABEND, 343 344 /* Interrupt bits that map directly to ISR/IMR bits */ 345 HAL_INT_COMMON = HAL_INT_RXNOFRM 346 | HAL_INT_RXDESC 347 | HAL_INT_RXEOL 348 | HAL_INT_RXORN 349 | HAL_INT_TXURN 350 | HAL_INT_TXDESC 351 | HAL_INT_MIB 352 | HAL_INT_RXPHY 353 | HAL_INT_RXKCM 354 | HAL_INT_SWBA 355 | HAL_INT_BMISS 356 | HAL_INT_GPIO, 357 } HAL_INT; 358 359 typedef enum { 360 HAL_RFGAIN_INACTIVE = 0, 361 HAL_RFGAIN_READ_REQUESTED = 1, 362 HAL_RFGAIN_NEED_CHANGE = 2 363 } HAL_RFGAIN; 364 365 /* 366 * Channels are specified by frequency. 367 */ 368 typedef struct { 369 uint32_t channelFlags; /* see below */ 370 uint16_t channel; /* setting in Mhz */ 371 uint8_t privFlags; 372 int8_t maxRegTxPower; /* max regulatory tx power in dBm */ 373 int8_t maxTxPower; /* max true tx power in 0.5 dBm */ 374 int8_t minTxPower; /* min true tx power in 0.5 dBm */ 375 } HAL_CHANNEL; 376 377 /* channelFlags */ 378 #define CHANNEL_CW_INT 0x00002 /* CW interference detected on channel */ 379 #define CHANNEL_TURBO 0x00010 /* Turbo Channel */ 380 #define CHANNEL_CCK 0x00020 /* CCK channel */ 381 #define CHANNEL_OFDM 0x00040 /* OFDM channel */ 382 #define CHANNEL_2GHZ 0x00080 /* 2 GHz spectrum channel */ 383 #define CHANNEL_5GHZ 0x00100 /* 5 GHz spectrum channel */ 384 #define CHANNEL_PASSIVE 0x00200 /* Only passive scan allowed in the channel */ 385 #define CHANNEL_DYN 0x00400 /* dynamic CCK-OFDM channel */ 386 #define CHANNEL_STURBO 0x02000 /* Static turbo, no 11a-only usage */ 387 #define CHANNEL_HALF 0x04000 /* Half rate channel */ 388 #define CHANNEL_QUARTER 0x08000 /* Quarter rate channel */ 389 #define CHANNEL_HT20 0x10000 /* 11n 20MHZ channel */ 390 #define CHANNEL_HT40PLUS 0x20000 /* 11n 40MHZ channel w/ ext chan above */ 391 #define CHANNEL_HT40MINUS 0x40000 /* 11n 40MHZ channel w/ ext chan below */ 392 393 /* privFlags */ 394 #define CHANNEL_INTERFERENCE 0x01 /* Software use: channel interference 395 used for as AR as well as RADAR 396 interference detection */ 397 #define CHANNEL_DFS 0x02 /* DFS required on channel */ 398 #define CHANNEL_4MS_LIMIT 0x04 /* 4msec packet limit on this channel */ 399 #define CHANNEL_DFS_CLEAR 0x08 /* if channel has been checked for DFS */ 400 401 #define CHANNEL_A (CHANNEL_5GHZ|CHANNEL_OFDM) 402 #define CHANNEL_B (CHANNEL_2GHZ|CHANNEL_CCK) 403 #define CHANNEL_PUREG (CHANNEL_2GHZ|CHANNEL_OFDM) 404 #ifdef notdef 405 #define CHANNEL_G (CHANNEL_2GHZ|CHANNEL_DYN) 406 #else 407 #define CHANNEL_G (CHANNEL_2GHZ|CHANNEL_OFDM) 408 #endif 409 #define CHANNEL_T (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO) 410 #define CHANNEL_ST (CHANNEL_T|CHANNEL_STURBO) 411 #define CHANNEL_108G (CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO) 412 #define CHANNEL_108A CHANNEL_T 413 #define CHANNEL_G_HT20 (CHANNEL_G|CHANNEL_HT20) 414 #define CHANNEL_A_HT20 (CHANNEL_A|CHANNEL_HT20) 415 #define CHANNEL_G_HT40PLUS (CHANNEL_G|CHANNEL_HT40PLUS) 416 #define CHANNEL_G_HT40MINUS (CHANNEL_G|CHANNEL_HT40MINUS) 417 #define CHANNEL_A_HT40PLUS (CHANNEL_A|CHANNEL_HT40PLUS) 418 #define CHANNEL_A_HT40MINUS (CHANNEL_A|CHANNEL_HT40MINUS) 419 #define CHANNEL_ALL \ 420 (CHANNEL_OFDM | CHANNEL_CCK| CHANNEL_2GHZ | CHANNEL_5GHZ | \ 421 CHANNEL_TURBO | CHANNEL_HT20 | CHANNEL_HT40PLUS | CHANNEL_HT40MINUS) 422 #define CHANNEL_ALL_NOTURBO (CHANNEL_ALL &~ CHANNEL_TURBO) 423 424 #define HAL_ANTENNA_MIN_MODE 0 425 #define HAL_ANTENNA_FIXED_A 1 426 #define HAL_ANTENNA_FIXED_B 2 427 #define HAL_ANTENNA_MAX_MODE 3 428 429 typedef struct { 430 uint32_t ackrcv_bad; 431 uint32_t rts_bad; 432 uint32_t rts_good; 433 uint32_t fcs_bad; 434 uint32_t beacons; 435 } HAL_MIB_STATS; 436 437 typedef uint16_t HAL_CTRY_CODE; /* country code */ 438 typedef uint16_t HAL_REG_DOMAIN; /* regulatory domain code */ 439 440 enum { 441 CTRY_DEBUG = 0x1ff, /* debug country code */ 442 CTRY_DEFAULT = 0 /* default country code */ 443 }; 444 445 enum { 446 HAL_MODE_11A = 0x001, /* 11a channels */ 447 HAL_MODE_TURBO = 0x002, /* 11a turbo-only channels */ 448 HAL_MODE_11B = 0x004, /* 11b channels */ 449 HAL_MODE_PUREG = 0x008, /* 11g channels (OFDM only) */ 450 #ifdef notdef 451 HAL_MODE_11G = 0x010, /* 11g channels (OFDM/CCK) */ 452 #else 453 HAL_MODE_11G = 0x008, /* XXX historical */ 454 #endif 455 HAL_MODE_108G = 0x020, /* 11g+Turbo channels */ 456 HAL_MODE_108A = 0x040, /* 11a+Turbo channels */ 457 HAL_MODE_11A_HALF_RATE = 0x200, /* 11a half width channels */ 458 HAL_MODE_11A_QUARTER_RATE = 0x400, /* 11a quarter width channels */ 459 HAL_MODE_11G_HALF_RATE = 0x800, /* 11g half width channels */ 460 HAL_MODE_11G_QUARTER_RATE = 0x1000, /* 11g quarter width channels */ 461 HAL_MODE_11NG_HT20 = 0x008000, 462 HAL_MODE_11NA_HT20 = 0x010000, 463 HAL_MODE_11NG_HT40PLUS = 0x020000, 464 HAL_MODE_11NG_HT40MINUS = 0x040000, 465 HAL_MODE_11NA_HT40PLUS = 0x080000, 466 HAL_MODE_11NA_HT40MINUS = 0x100000, 467 HAL_MODE_ALL = 0xffffff 468 }; 469 470 typedef struct { 471 int rateCount; /* NB: for proper padding */ 472 uint8_t rateCodeToIndex[144]; /* back mapping */ 473 struct { 474 uint8_t valid; /* valid for rate control use */ 475 uint8_t phy; /* CCK/OFDM/XR */ 476 uint32_t rateKbps; /* transfer rate in kbs */ 477 uint8_t rateCode; /* rate for h/w descriptors */ 478 uint8_t shortPreamble; /* mask for enabling short 479 * preamble in CCK rate code */ 480 uint8_t dot11Rate; /* value for supported rates 481 * info element of MLME */ 482 uint8_t controlRate; /* index of next lower basic 483 * rate; used for dur. calcs */ 484 uint16_t lpAckDuration; /* long preamble ACK duration */ 485 uint16_t spAckDuration; /* short preamble ACK duration*/ 486 } info[32]; 487 } HAL_RATE_TABLE; 488 489 typedef struct { 490 u_int rs_count; /* number of valid entries */ 491 uint8_t rs_rates[32]; /* rates */ 492 } HAL_RATE_SET; 493 494 /* 495 * 802.11n specific structures and enums 496 */ 497 typedef enum { 498 HAL_CHAINTYPE_TX = 1, /* Tx chain type */ 499 HAL_CHAINTYPE_RX = 2, /* RX chain type */ 500 } HAL_CHAIN_TYPE; 501 502 typedef struct { 503 u_int Tries; 504 u_int Rate; 505 u_int PktDuration; 506 u_int ChSel; 507 u_int RateFlags; 508 #define HAL_RATESERIES_RTS_CTS 0x0001 /* use rts/cts w/this series */ 509 #define HAL_RATESERIES_2040 0x0002 /* use ext channel for series */ 510 #define HAL_RATESERIES_HALFGI 0x0004 /* use half-gi for series */ 511 } HAL_11N_RATE_SERIES; 512 513 typedef enum { 514 HAL_HT_MACMODE_20 = 0, /* 20 MHz operation */ 515 HAL_HT_MACMODE_2040 = 1, /* 20/40 MHz operation */ 516 } HAL_HT_MACMODE; 517 518 typedef enum { 519 HAL_HT_PHYMODE_20 = 0, /* 20 MHz operation */ 520 HAL_HT_PHYMODE_2040 = 1, /* 20/40 MHz operation */ 521 } HAL_HT_PHYMODE; 522 523 typedef enum { 524 HAL_HT_EXTPROTSPACING_20 = 0, /* 20 MHz spacing */ 525 HAL_HT_EXTPROTSPACING_25 = 1, /* 25 MHz spacing */ 526 } HAL_HT_EXTPROTSPACING; 527 528 529 typedef enum { 530 HAL_RX_CLEAR_CTL_LOW = 0x1, /* force control channel to appear busy */ 531 HAL_RX_CLEAR_EXT_LOW = 0x2, /* force extension channel to appear busy */ 532 } HAL_HT_RXCLEAR; 533 534 /* 535 * Antenna switch control. By default antenna selection 536 * enables multiple (2) antenna use. To force use of the 537 * A or B antenna only specify a fixed setting. Fixing 538 * the antenna will also disable any diversity support. 539 */ 540 typedef enum { 541 HAL_ANT_VARIABLE = 0, /* variable by programming */ 542 HAL_ANT_FIXED_A = 1, /* fixed antenna A */ 543 HAL_ANT_FIXED_B = 2, /* fixed antenna B */ 544 } HAL_ANT_SETTING; 545 546 typedef enum { 547 HAL_M_STA = 1, /* infrastructure station */ 548 HAL_M_IBSS = 0, /* IBSS (adhoc) station */ 549 HAL_M_HOSTAP = 6, /* Software Access Point */ 550 HAL_M_MONITOR = 8 /* Monitor mode */ 551 } HAL_OPMODE; 552 553 typedef struct { 554 uint8_t kv_type; /* one of HAL_CIPHER */ 555 uint8_t kv_pad; 556 uint16_t kv_len; /* length in bits */ 557 uint8_t kv_val[16]; /* enough for 128-bit keys */ 558 uint8_t kv_mic[8]; /* TKIP MIC key */ 559 uint8_t kv_txmic[8]; /* TKIP TX MIC key (optional) */ 560 } HAL_KEYVAL; 561 562 typedef enum { 563 HAL_CIPHER_WEP = 0, 564 HAL_CIPHER_AES_OCB = 1, 565 HAL_CIPHER_AES_CCM = 2, 566 HAL_CIPHER_CKIP = 3, 567 HAL_CIPHER_TKIP = 4, 568 HAL_CIPHER_CLR = 5, /* no encryption */ 569 570 HAL_CIPHER_MIC = 127 /* TKIP-MIC, not a cipher */ 571 } HAL_CIPHER; 572 573 enum { 574 HAL_SLOT_TIME_6 = 6, /* NB: for turbo mode */ 575 HAL_SLOT_TIME_9 = 9, 576 HAL_SLOT_TIME_20 = 20, 577 }; 578 579 /* 580 * Per-station beacon timer state. Note that the specified 581 * beacon interval (given in TU's) can also include flags 582 * to force a TSF reset and to enable the beacon xmit logic. 583 * If bs_cfpmaxduration is non-zero the hardware is setup to 584 * coexist with a PCF-capable AP. 585 */ 586 typedef struct { 587 uint32_t bs_nexttbtt; /* next beacon in TU */ 588 uint32_t bs_nextdtim; /* next DTIM in TU */ 589 uint32_t bs_intval; /* beacon interval+flags */ 590 #define HAL_BEACON_PERIOD 0x0000ffff /* beacon interval period */ 591 #define HAL_BEACON_ENA 0x00800000 /* beacon xmit enable */ 592 #define HAL_BEACON_RESET_TSF 0x01000000 /* clear TSF */ 593 uint32_t bs_dtimperiod; 594 uint16_t bs_cfpperiod; /* CFP period in TU */ 595 uint16_t bs_cfpmaxduration; /* max CFP duration in TU */ 596 uint32_t bs_cfpnext; /* next CFP in TU */ 597 uint16_t bs_timoffset; /* byte offset to TIM bitmap */ 598 uint16_t bs_bmissthreshold; /* beacon miss threshold */ 599 uint32_t bs_sleepduration; /* max sleep duration */ 600 } HAL_BEACON_STATE; 601 602 /* 603 * Like HAL_BEACON_STATE but for non-station mode setup. 604 * NB: see above flag definitions for bt_intval. 605 */ 606 typedef struct { 607 uint32_t bt_intval; /* beacon interval+flags */ 608 uint32_t bt_nexttbtt; /* next beacon in TU */ 609 uint32_t bt_nextatim; /* next ATIM in TU */ 610 uint32_t bt_nextdba; /* next DBA in 1/8th TU */ 611 uint32_t bt_nextswba; /* next SWBA in 1/8th TU */ 612 uint32_t bt_flags; /* timer enables */ 613 #define HAL_BEACON_TBTT_EN 0x00000001 614 #define HAL_BEACON_DBA_EN 0x00000002 615 #define HAL_BEACON_SWBA_EN 0x00000004 616 } HAL_BEACON_TIMERS; 617 618 /* 619 * Per-node statistics maintained by the driver for use in 620 * optimizing signal quality and other operational aspects. 621 */ 622 typedef struct { 623 uint32_t ns_avgbrssi; /* average beacon rssi */ 624 uint32_t ns_avgrssi; /* average data rssi */ 625 uint32_t ns_avgtxrssi; /* average tx rssi */ 626 } HAL_NODE_STATS; 627 628 #define HAL_RSSI_EP_MULTIPLIER (1<<7) /* pow2 to optimize out * and / */ 629 630 struct ath_desc; 631 struct ath_tx_status; 632 struct ath_rx_status; 633 634 /* 635 * Hardware Access Layer (HAL) API. 636 * 637 * Clients of the HAL call ath_hal_attach to obtain a reference to an 638 * ath_hal structure for use with the device. Hardware-related operations 639 * that follow must call back into the HAL through interface, supplying 640 * the reference as the first parameter. Note that before using the 641 * reference returned by ath_hal_attach the caller should verify the 642 * ABI version number. 643 */ 644 struct ath_hal { 645 uint32_t ah_magic; /* consistency check magic number */ 646 uint32_t ah_abi; /* HAL ABI version */ 647 #define HAL_ABI_VERSION 0x08112800 /* YYMMDDnn */ 648 uint16_t ah_devid; /* PCI device ID */ 649 uint16_t ah_subvendorid; /* PCI subvendor ID */ 650 HAL_SOFTC ah_sc; /* back pointer to driver/os state */ 651 HAL_BUS_TAG ah_st; /* params for register r+w */ 652 HAL_BUS_HANDLE ah_sh; 653 HAL_CTRY_CODE ah_countryCode; 654 655 uint32_t ah_macVersion; /* MAC version id */ 656 uint16_t ah_macRev; /* MAC revision */ 657 uint16_t ah_phyRev; /* PHY revision */ 658 /* NB: when only one radio is present the rev is in 5Ghz */ 659 uint16_t ah_analog5GhzRev;/* 5GHz radio revision */ 660 uint16_t ah_analog2GhzRev;/* 2GHz radio revision */ 661 662 const HAL_RATE_TABLE *__ahdecl(*ah_getRateTable)(struct ath_hal *, 663 u_int mode); 664 void __ahdecl(*ah_detach)(struct ath_hal*); 665 666 /* Reset functions */ 667 HAL_BOOL __ahdecl(*ah_reset)(struct ath_hal *, HAL_OPMODE, 668 HAL_CHANNEL *, HAL_BOOL bChannelChange, 669 HAL_STATUS *status); 670 HAL_BOOL __ahdecl(*ah_phyDisable)(struct ath_hal *); 671 HAL_BOOL __ahdecl(*ah_disable)(struct ath_hal *); 672 void __ahdecl(*ah_setPCUConfig)(struct ath_hal *); 673 HAL_BOOL __ahdecl(*ah_perCalibration)(struct ath_hal*, HAL_CHANNEL *, 674 HAL_BOOL *); 675 HAL_BOOL __ahdecl(*ah_perCalibrationN)(struct ath_hal *, HAL_CHANNEL *, 676 u_int chainMask, HAL_BOOL longCal, HAL_BOOL *isCalDone); 677 HAL_BOOL __ahdecl(*ah_resetCalValid)(struct ath_hal *, HAL_CHANNEL *); 678 HAL_BOOL __ahdecl(*ah_setTxPowerLimit)(struct ath_hal *, uint32_t); 679 680 /* Transmit functions */ 681 HAL_BOOL __ahdecl(*ah_updateTxTrigLevel)(struct ath_hal*, 682 HAL_BOOL incTrigLevel); 683 int __ahdecl(*ah_setupTxQueue)(struct ath_hal *, HAL_TX_QUEUE, 684 const HAL_TXQ_INFO *qInfo); 685 HAL_BOOL __ahdecl(*ah_setTxQueueProps)(struct ath_hal *, int q, 686 const HAL_TXQ_INFO *qInfo); 687 HAL_BOOL __ahdecl(*ah_getTxQueueProps)(struct ath_hal *, int q, 688 HAL_TXQ_INFO *qInfo); 689 HAL_BOOL __ahdecl(*ah_releaseTxQueue)(struct ath_hal *ah, u_int q); 690 HAL_BOOL __ahdecl(*ah_resetTxQueue)(struct ath_hal *ah, u_int q); 691 uint32_t __ahdecl(*ah_getTxDP)(struct ath_hal*, u_int); 692 HAL_BOOL __ahdecl(*ah_setTxDP)(struct ath_hal*, u_int, uint32_t txdp); 693 uint32_t __ahdecl(*ah_numTxPending)(struct ath_hal *, u_int q); 694 HAL_BOOL __ahdecl(*ah_startTxDma)(struct ath_hal*, u_int); 695 HAL_BOOL __ahdecl(*ah_stopTxDma)(struct ath_hal*, u_int); 696 HAL_BOOL __ahdecl(*ah_setupTxDesc)(struct ath_hal *, struct ath_desc *, 697 u_int pktLen, u_int hdrLen, 698 HAL_PKT_TYPE type, u_int txPower, 699 u_int txRate0, u_int txTries0, 700 u_int keyIx, u_int antMode, u_int flags, 701 u_int rtsctsRate, u_int rtsctsDuration, 702 u_int compicvLen, u_int compivLen, 703 u_int comp); 704 HAL_BOOL __ahdecl(*ah_setupXTxDesc)(struct ath_hal *, struct ath_desc*, 705 u_int txRate1, u_int txTries1, 706 u_int txRate2, u_int txTries2, 707 u_int txRate3, u_int txTries3); 708 HAL_BOOL __ahdecl(*ah_fillTxDesc)(struct ath_hal *, struct ath_desc *, 709 u_int segLen, HAL_BOOL firstSeg, 710 HAL_BOOL lastSeg, const struct ath_desc *); 711 HAL_STATUS __ahdecl(*ah_procTxDesc)(struct ath_hal *, 712 struct ath_desc *, struct ath_tx_status *); 713 void __ahdecl(*ah_getTxIntrQueue)(struct ath_hal *, uint32_t *); 714 void __ahdecl(*ah_reqTxIntrDesc)(struct ath_hal *, struct ath_desc*); 715 716 /* Receive Functions */ 717 uint32_t __ahdecl(*ah_getRxDP)(struct ath_hal*); 718 void __ahdecl(*ah_setRxDP)(struct ath_hal*, uint32_t rxdp); 719 void __ahdecl(*ah_enableReceive)(struct ath_hal*); 720 HAL_BOOL __ahdecl(*ah_stopDmaReceive)(struct ath_hal*); 721 void __ahdecl(*ah_startPcuReceive)(struct ath_hal*); 722 void __ahdecl(*ah_stopPcuReceive)(struct ath_hal*); 723 void __ahdecl(*ah_setMulticastFilter)(struct ath_hal*, 724 uint32_t filter0, uint32_t filter1); 725 HAL_BOOL __ahdecl(*ah_setMulticastFilterIndex)(struct ath_hal*, 726 uint32_t index); 727 HAL_BOOL __ahdecl(*ah_clrMulticastFilterIndex)(struct ath_hal*, 728 uint32_t index); 729 uint32_t __ahdecl(*ah_getRxFilter)(struct ath_hal*); 730 void __ahdecl(*ah_setRxFilter)(struct ath_hal*, uint32_t); 731 HAL_BOOL __ahdecl(*ah_setupRxDesc)(struct ath_hal *, struct ath_desc *, 732 uint32_t size, u_int flags); 733 HAL_STATUS __ahdecl(*ah_procRxDesc)(struct ath_hal *, 734 struct ath_desc *, uint32_t phyAddr, 735 struct ath_desc *next, uint64_t tsf, 736 struct ath_rx_status *); 737 void __ahdecl(*ah_rxMonitor)(struct ath_hal *, 738 const HAL_NODE_STATS *, HAL_CHANNEL *); 739 void __ahdecl(*ah_procMibEvent)(struct ath_hal *, 740 const HAL_NODE_STATS *); 741 742 /* Misc Functions */ 743 HAL_STATUS __ahdecl(*ah_getCapability)(struct ath_hal *, 744 HAL_CAPABILITY_TYPE, uint32_t capability, 745 uint32_t *result); 746 HAL_BOOL __ahdecl(*ah_setCapability)(struct ath_hal *, 747 HAL_CAPABILITY_TYPE, uint32_t capability, 748 uint32_t setting, HAL_STATUS *); 749 HAL_BOOL __ahdecl(*ah_getDiagState)(struct ath_hal *, int request, 750 const void *args, uint32_t argsize, 751 void **result, uint32_t *resultsize); 752 void __ahdecl(*ah_getMacAddress)(struct ath_hal *, uint8_t *); 753 HAL_BOOL __ahdecl(*ah_setMacAddress)(struct ath_hal *, const uint8_t*); 754 void __ahdecl(*ah_getBssIdMask)(struct ath_hal *, uint8_t *); 755 HAL_BOOL __ahdecl(*ah_setBssIdMask)(struct ath_hal *, const uint8_t*); 756 HAL_BOOL __ahdecl(*ah_setRegulatoryDomain)(struct ath_hal*, 757 uint16_t, HAL_STATUS *); 758 void __ahdecl(*ah_setLedState)(struct ath_hal*, HAL_LED_STATE); 759 void __ahdecl(*ah_writeAssocid)(struct ath_hal*, 760 const uint8_t *bssid, uint16_t assocId); 761 HAL_BOOL __ahdecl(*ah_gpioCfgOutput)(struct ath_hal *, uint32_t gpio); 762 HAL_BOOL __ahdecl(*ah_gpioCfgInput)(struct ath_hal *, uint32_t gpio); 763 uint32_t __ahdecl(*ah_gpioGet)(struct ath_hal *, uint32_t gpio); 764 HAL_BOOL __ahdecl(*ah_gpioSet)(struct ath_hal *, 765 uint32_t gpio, uint32_t val); 766 void __ahdecl(*ah_gpioSetIntr)(struct ath_hal*, u_int, uint32_t); 767 uint32_t __ahdecl(*ah_getTsf32)(struct ath_hal*); 768 uint64_t __ahdecl(*ah_getTsf64)(struct ath_hal*); 769 void __ahdecl(*ah_resetTsf)(struct ath_hal*); 770 HAL_BOOL __ahdecl(*ah_detectCardPresent)(struct ath_hal*); 771 void __ahdecl(*ah_updateMibCounters)(struct ath_hal*, 772 HAL_MIB_STATS*); 773 HAL_RFGAIN __ahdecl(*ah_getRfGain)(struct ath_hal*); 774 u_int __ahdecl(*ah_getDefAntenna)(struct ath_hal*); 775 void __ahdecl(*ah_setDefAntenna)(struct ath_hal*, u_int); 776 HAL_ANT_SETTING __ahdecl(*ah_getAntennaSwitch)(struct ath_hal*); 777 HAL_BOOL __ahdecl(*ah_setAntennaSwitch)(struct ath_hal*, 778 HAL_ANT_SETTING); 779 HAL_BOOL __ahdecl(*ah_setSifsTime)(struct ath_hal*, u_int); 780 u_int __ahdecl(*ah_getSifsTime)(struct ath_hal*); 781 HAL_BOOL __ahdecl(*ah_setSlotTime)(struct ath_hal*, u_int); 782 u_int __ahdecl(*ah_getSlotTime)(struct ath_hal*); 783 HAL_BOOL __ahdecl(*ah_setAckTimeout)(struct ath_hal*, u_int); 784 u_int __ahdecl(*ah_getAckTimeout)(struct ath_hal*); 785 HAL_BOOL __ahdecl(*ah_setAckCTSRate)(struct ath_hal*, u_int); 786 u_int __ahdecl(*ah_getAckCTSRate)(struct ath_hal*); 787 HAL_BOOL __ahdecl(*ah_setCTSTimeout)(struct ath_hal*, u_int); 788 u_int __ahdecl(*ah_getCTSTimeout)(struct ath_hal*); 789 HAL_BOOL __ahdecl(*ah_setDecompMask)(struct ath_hal*, uint16_t, int); 790 void __ahdecl(*ah_setCoverageClass)(struct ath_hal*, uint8_t, int); 791 792 /* Key Cache Functions */ 793 uint32_t __ahdecl(*ah_getKeyCacheSize)(struct ath_hal*); 794 HAL_BOOL __ahdecl(*ah_resetKeyCacheEntry)(struct ath_hal*, uint16_t); 795 HAL_BOOL __ahdecl(*ah_isKeyCacheEntryValid)(struct ath_hal *, 796 uint16_t); 797 HAL_BOOL __ahdecl(*ah_setKeyCacheEntry)(struct ath_hal*, 798 uint16_t, const HAL_KEYVAL *, 799 const uint8_t *, int); 800 HAL_BOOL __ahdecl(*ah_setKeyCacheEntryMac)(struct ath_hal*, 801 uint16_t, const uint8_t *); 802 803 /* Power Management Functions */ 804 HAL_BOOL __ahdecl(*ah_setPowerMode)(struct ath_hal*, 805 HAL_POWER_MODE mode, int setChip); 806 HAL_POWER_MODE __ahdecl(*ah_getPowerMode)(struct ath_hal*); 807 int16_t __ahdecl(*ah_getChanNoise)(struct ath_hal *, HAL_CHANNEL *); 808 809 /* Beacon Management Functions */ 810 void __ahdecl(*ah_setBeaconTimers)(struct ath_hal*, 811 const HAL_BEACON_TIMERS *); 812 /* NB: deprecated, use ah_setBeaconTimers instead */ 813 void __ahdecl(*ah_beaconInit)(struct ath_hal *, 814 uint32_t nexttbtt, uint32_t intval); 815 void __ahdecl(*ah_setStationBeaconTimers)(struct ath_hal*, 816 const HAL_BEACON_STATE *); 817 void __ahdecl(*ah_resetStationBeaconTimers)(struct ath_hal*); 818 819 /* Interrupt functions */ 820 HAL_BOOL __ahdecl(*ah_isInterruptPending)(struct ath_hal*); 821 HAL_BOOL __ahdecl(*ah_getPendingInterrupts)(struct ath_hal*, HAL_INT*); 822 HAL_INT __ahdecl(*ah_getInterrupts)(struct ath_hal*); 823 HAL_INT __ahdecl(*ah_setInterrupts)(struct ath_hal*, HAL_INT); 824 }; 825 826 /* 827 * Check the PCI vendor ID and device ID against Atheros' values 828 * and return a printable description for any Atheros hardware. 829 * AH_NULL is returned if the ID's do not describe Atheros hardware. 830 */ 831 extern const char *__ahdecl ath_hal_probe(uint16_t vendorid, uint16_t devid); 832 833 /* 834 * Attach the HAL for use with the specified device. The device is 835 * defined by the PCI device ID. The caller provides an opaque pointer 836 * to an upper-layer data structure (HAL_SOFTC) that is stored in the 837 * HAL state block for later use. Hardware register accesses are done 838 * using the specified bus tag and handle. On successful return a 839 * reference to a state block is returned that must be supplied in all 840 * subsequent HAL calls. Storage associated with this reference is 841 * dynamically allocated and must be freed by calling the ah_detach 842 * method when the client is done. If the attach operation fails a 843 * null (AH_NULL) reference will be returned and a status code will 844 * be returned if the status parameter is non-zero. 845 */ 846 extern struct ath_hal * __ahdecl ath_hal_attach(uint16_t devid, HAL_SOFTC, 847 HAL_BUS_TAG, HAL_BUS_HANDLE, HAL_STATUS* status); 848 849 /* 850 * Return a list of channels available for use with the hardware. 851 * The list is based on what the hardware is capable of, the specified 852 * country code, the modeSelect mask, and whether or not outdoor 853 * channels are to be permitted. 854 * 855 * The channel list is returned in the supplied array. maxchans 856 * defines the maximum size of this array. nchans contains the actual 857 * number of channels returned. If a problem occurred or there were 858 * no channels that met the criteria then AH_FALSE is returned. 859 */ 860 extern HAL_BOOL __ahdecl ath_hal_init_channels(struct ath_hal *, 861 HAL_CHANNEL *chans, u_int maxchans, u_int *nchans, 862 uint8_t *regclassids, u_int maxregids, u_int *nregids, 863 HAL_CTRY_CODE cc, u_int modeSelect, 864 HAL_BOOL enableOutdoor, HAL_BOOL enableExtendedChannels); 865 866 /* 867 * Calibrate noise floor data following a channel scan or similar. 868 * This must be called prior retrieving noise floor data. 869 */ 870 extern void __ahdecl ath_hal_process_noisefloor(struct ath_hal *ah); 871 872 /* 873 * Return bit mask of wireless modes supported by the hardware. 874 */ 875 extern u_int __ahdecl ath_hal_getwirelessmodes(struct ath_hal*, HAL_CTRY_CODE); 876 877 /* 878 * Calculate the transmit duration of a frame. 879 */ 880 extern uint16_t __ahdecl ath_hal_computetxtime(struct ath_hal *, 881 const HAL_RATE_TABLE *rates, uint32_t frameLen, 882 uint16_t rateix, HAL_BOOL shortPreamble); 883 884 /* 885 * Return if device is public safety. 886 */ 887 extern HAL_BOOL __ahdecl ath_hal_ispublicsafetysku(struct ath_hal *); 888 889 /* 890 * Return if device is operating in 900 MHz band. 891 */ 892 extern HAL_BOOL ath_hal_isgsmsku(struct ath_hal *); 893 894 /* 895 * Convert between IEEE channel number and channel frequency 896 * using the specified channel flags; e.g. CHANNEL_2GHZ. 897 */ 898 extern int __ahdecl ath_hal_mhz2ieee(struct ath_hal *, u_int mhz, u_int flags); 899 #endif /* _ATH_AH_H_ */ 900
Indexes created Fri Oct 03 02:09:57 GMT 2025