ar2317.c revision 1.4 1 1.1 alc /*
2 1.1 alc * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting
3 1.1 alc * Copyright (c) 2002-2008 Atheros Communications, Inc.
4 1.1 alc *
5 1.1 alc * Permission to use, copy, modify, and/or distribute this software for any
6 1.1 alc * purpose with or without fee is hereby granted, provided that the above
7 1.1 alc * copyright notice and this permission notice appear in all copies.
8 1.1 alc *
9 1.1 alc * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10 1.1 alc * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11 1.1 alc * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12 1.1 alc * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13 1.1 alc * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14 1.1 alc * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15 1.1 alc * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16 1.1 alc *
17 1.4 martin * $Id: ar2317.c,v 1.4 2013/09/12 12:03:33 martin Exp $
18 1.1 alc */
19 1.1 alc #include "opt_ah.h"
20 1.1 alc
21 1.1 alc #include "ah.h"
22 1.2 alc #include "ah_devid.h"
23 1.1 alc #include "ah_internal.h"
24 1.1 alc
25 1.1 alc #include "ar5212/ar5212.h"
26 1.1 alc #include "ar5212/ar5212reg.h"
27 1.1 alc #include "ar5212/ar5212phy.h"
28 1.1 alc
29 1.1 alc #include "ah_eeprom_v3.h"
30 1.1 alc
31 1.1 alc #define AH_5212_2317
32 1.1 alc #include "ar5212/ar5212.ini"
33 1.1 alc
34 1.1 alc #define N(a) (sizeof(a)/sizeof(a[0]))
35 1.1 alc
36 1.1 alc typedef RAW_DATA_STRUCT_2413 RAW_DATA_STRUCT_2317;
37 1.1 alc typedef RAW_DATA_PER_CHANNEL_2413 RAW_DATA_PER_CHANNEL_2317;
38 1.1 alc #define PWR_TABLE_SIZE_2317 PWR_TABLE_SIZE_2413
39 1.1 alc
40 1.1 alc struct ar2317State {
41 1.1 alc RF_HAL_FUNCS base; /* public state, must be first */
42 1.1 alc uint16_t pcdacTable[PWR_TABLE_SIZE_2317];
43 1.1 alc
44 1.1 alc uint32_t Bank1Data[N(ar5212Bank1_2317)];
45 1.1 alc uint32_t Bank2Data[N(ar5212Bank2_2317)];
46 1.1 alc uint32_t Bank3Data[N(ar5212Bank3_2317)];
47 1.1 alc uint32_t Bank6Data[N(ar5212Bank6_2317)];
48 1.1 alc uint32_t Bank7Data[N(ar5212Bank7_2317)];
49 1.1 alc
50 1.1 alc /*
51 1.1 alc * Private state for reduced stack usage.
52 1.1 alc */
53 1.1 alc /* filled out Vpd table for all pdGains (chanL) */
54 1.1 alc uint16_t vpdTable_L[MAX_NUM_PDGAINS_PER_CHANNEL]
55 1.1 alc [MAX_PWR_RANGE_IN_HALF_DB];
56 1.1 alc /* filled out Vpd table for all pdGains (chanR) */
57 1.1 alc uint16_t vpdTable_R[MAX_NUM_PDGAINS_PER_CHANNEL]
58 1.1 alc [MAX_PWR_RANGE_IN_HALF_DB];
59 1.1 alc /* filled out Vpd table for all pdGains (interpolated) */
60 1.1 alc uint16_t vpdTable_I[MAX_NUM_PDGAINS_PER_CHANNEL]
61 1.1 alc [MAX_PWR_RANGE_IN_HALF_DB];
62 1.1 alc };
63 1.1 alc #define AR2317(ah) ((struct ar2317State *) AH5212(ah)->ah_rfHal)
64 1.1 alc
65 1.1 alc extern void ar5212ModifyRfBuffer(uint32_t *rfBuf, uint32_t reg32,
66 1.1 alc uint32_t numBits, uint32_t firstBit, uint32_t column);
67 1.1 alc
68 1.1 alc static void
69 1.1 alc ar2317WriteRegs(struct ath_hal *ah, u_int modesIndex, u_int freqIndex,
70 1.1 alc int writes)
71 1.1 alc {
72 1.1 alc HAL_INI_WRITE_ARRAY(ah, ar5212Modes_2317, modesIndex, writes);
73 1.1 alc HAL_INI_WRITE_ARRAY(ah, ar5212Common_2317, 1, writes);
74 1.1 alc HAL_INI_WRITE_ARRAY(ah, ar5212BB_RfGain_2317, freqIndex, writes);
75 1.1 alc }
76 1.1 alc
77 1.1 alc /*
78 1.1 alc * Take the MHz channel value and set the Channel value
79 1.1 alc *
80 1.1 alc * ASSUMES: Writes enabled to analog bus
81 1.1 alc */
82 1.1 alc static HAL_BOOL
83 1.1 alc ar2317SetChannel(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan)
84 1.1 alc {
85 1.1 alc uint32_t channelSel = 0;
86 1.1 alc uint32_t bModeSynth = 0;
87 1.1 alc uint32_t aModeRefSel = 0;
88 1.1 alc uint32_t reg32 = 0;
89 1.1 alc
90 1.1 alc OS_MARK(ah, AH_MARK_SETCHANNEL, chan->channel);
91 1.1 alc
92 1.1 alc if (chan->channel < 4800) {
93 1.1 alc uint32_t txctl;
94 1.1 alc channelSel = chan->channel - 2272 ;
95 1.1 alc channelSel = ath_hal_reverseBits(channelSel, 8);
96 1.1 alc
97 1.1 alc txctl = OS_REG_READ(ah, AR_PHY_CCK_TX_CTRL);
98 1.1 alc if (chan->channel == 2484) {
99 1.1 alc /* Enable channel spreading for channel 14 */
100 1.1 alc OS_REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
101 1.1 alc txctl | AR_PHY_CCK_TX_CTRL_JAPAN);
102 1.1 alc } else {
103 1.1 alc OS_REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
104 1.1 alc txctl &~ AR_PHY_CCK_TX_CTRL_JAPAN);
105 1.1 alc }
106 1.1 alc } else if ((chan->channel % 20) == 0 && chan->channel >= 5120) {
107 1.1 alc channelSel = ath_hal_reverseBits(
108 1.1 alc ((chan->channel - 4800) / 20 << 2), 8);
109 1.1 alc aModeRefSel = ath_hal_reverseBits(3, 2);
110 1.1 alc } else if ((chan->channel % 10) == 0) {
111 1.1 alc channelSel = ath_hal_reverseBits(
112 1.1 alc ((chan->channel - 4800) / 10 << 1), 8);
113 1.1 alc aModeRefSel = ath_hal_reverseBits(2, 2);
114 1.1 alc } else if ((chan->channel % 5) == 0) {
115 1.1 alc channelSel = ath_hal_reverseBits(
116 1.1 alc (chan->channel - 4800) / 5, 8);
117 1.1 alc aModeRefSel = ath_hal_reverseBits(1, 2);
118 1.1 alc } else {
119 1.1 alc HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid channel %u MHz\n",
120 1.1 alc __func__, chan->channel);
121 1.1 alc return AH_FALSE;
122 1.1 alc }
123 1.1 alc
124 1.1 alc reg32 = (channelSel << 4) | (aModeRefSel << 2) | (bModeSynth << 1) |
125 1.1 alc (1 << 12) | 0x1;
126 1.1 alc OS_REG_WRITE(ah, AR_PHY(0x27), reg32 & 0xff);
127 1.1 alc
128 1.1 alc reg32 >>= 8;
129 1.1 alc OS_REG_WRITE(ah, AR_PHY(0x36), reg32 & 0x7f);
130 1.1 alc
131 1.1 alc AH_PRIVATE(ah)->ah_curchan = chan;
132 1.1 alc return AH_TRUE;
133 1.1 alc }
134 1.1 alc
135 1.1 alc /*
136 1.1 alc * Reads EEPROM header info from device structure and programs
137 1.1 alc * all rf registers
138 1.1 alc *
139 1.1 alc * REQUIRES: Access to the analog rf device
140 1.1 alc */
141 1.1 alc static HAL_BOOL
142 1.1 alc ar2317SetRfRegs(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan, uint16_t modesIndex, uint16_t *rfXpdGain)
143 1.1 alc {
144 1.1 alc #define RF_BANK_SETUP(_priv, _ix, _col) do { \
145 1.1 alc int i; \
146 1.1 alc for (i = 0; i < N(ar5212Bank##_ix##_2317); i++) \
147 1.1 alc (_priv)->Bank##_ix##Data[i] = ar5212Bank##_ix##_2317[i][_col];\
148 1.1 alc } while (0)
149 1.1 alc struct ath_hal_5212 *ahp = AH5212(ah);
150 1.1 alc const HAL_EEPROM *ee = AH_PRIVATE(ah)->ah_eeprom;
151 1.1 alc uint16_t ob2GHz = 0, db2GHz = 0;
152 1.1 alc struct ar2317State *priv = AR2317(ah);
153 1.1 alc int regWrites = 0;
154 1.1 alc
155 1.1 alc HALDEBUG(ah, HAL_DEBUG_RFPARAM,
156 1.1 alc "%s: chan 0x%x flag 0x%x modesIndex 0x%x\n",
157 1.1 alc __func__, chan->channel, chan->channelFlags, modesIndex);
158 1.1 alc
159 1.1 alc HALASSERT(priv);
160 1.1 alc
161 1.1 alc /* Setup rf parameters */
162 1.1 alc switch (chan->channelFlags & CHANNEL_ALL) {
163 1.1 alc case CHANNEL_B:
164 1.1 alc ob2GHz = ee->ee_obFor24;
165 1.1 alc db2GHz = ee->ee_dbFor24;
166 1.1 alc break;
167 1.1 alc case CHANNEL_G:
168 1.1 alc case CHANNEL_108G:
169 1.1 alc ob2GHz = ee->ee_obFor24g;
170 1.1 alc db2GHz = ee->ee_dbFor24g;
171 1.1 alc break;
172 1.1 alc default:
173 1.1 alc HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid channel flags 0x%x\n",
174 1.1 alc __func__, chan->channelFlags);
175 1.1 alc return AH_FALSE;
176 1.1 alc }
177 1.1 alc
178 1.1 alc /* Bank 1 Write */
179 1.1 alc RF_BANK_SETUP(priv, 1, 1);
180 1.1 alc
181 1.1 alc /* Bank 2 Write */
182 1.1 alc RF_BANK_SETUP(priv, 2, modesIndex);
183 1.1 alc
184 1.1 alc /* Bank 3 Write */
185 1.1 alc RF_BANK_SETUP(priv, 3, modesIndex);
186 1.1 alc
187 1.1 alc /* Bank 6 Write */
188 1.1 alc RF_BANK_SETUP(priv, 6, modesIndex);
189 1.1 alc
190 1.1 alc ar5212ModifyRfBuffer(priv->Bank6Data, ob2GHz, 3, 193, 0);
191 1.1 alc ar5212ModifyRfBuffer(priv->Bank6Data, db2GHz, 3, 190, 0);
192 1.1 alc
193 1.1 alc /* Bank 7 Setup */
194 1.1 alc RF_BANK_SETUP(priv, 7, modesIndex);
195 1.1 alc
196 1.1 alc /* Write Analog registers */
197 1.1 alc HAL_INI_WRITE_BANK(ah, ar5212Bank1_2317, priv->Bank1Data, regWrites);
198 1.1 alc HAL_INI_WRITE_BANK(ah, ar5212Bank2_2317, priv->Bank2Data, regWrites);
199 1.1 alc HAL_INI_WRITE_BANK(ah, ar5212Bank3_2317, priv->Bank3Data, regWrites);
200 1.1 alc HAL_INI_WRITE_BANK(ah, ar5212Bank6_2317, priv->Bank6Data, regWrites);
201 1.1 alc HAL_INI_WRITE_BANK(ah, ar5212Bank7_2317, priv->Bank7Data, regWrites);
202 1.1 alc /* Now that we have reprogrammed rfgain value, clear the flag. */
203 1.1 alc ahp->ah_rfgainState = HAL_RFGAIN_INACTIVE;
204 1.1 alc
205 1.1 alc return AH_TRUE;
206 1.1 alc #undef RF_BANK_SETUP
207 1.1 alc }
208 1.1 alc
209 1.1 alc /*
210 1.1 alc * Return a reference to the requested RF Bank.
211 1.1 alc */
212 1.1 alc static uint32_t *
213 1.1 alc ar2317GetRfBank(struct ath_hal *ah, int bank)
214 1.1 alc {
215 1.1 alc struct ar2317State *priv = AR2317(ah);
216 1.1 alc
217 1.1 alc HALASSERT(priv != AH_NULL);
218 1.1 alc switch (bank) {
219 1.1 alc case 1: return priv->Bank1Data;
220 1.1 alc case 2: return priv->Bank2Data;
221 1.1 alc case 3: return priv->Bank3Data;
222 1.1 alc case 6: return priv->Bank6Data;
223 1.1 alc case 7: return priv->Bank7Data;
224 1.1 alc }
225 1.1 alc HALDEBUG(ah, HAL_DEBUG_ANY, "%s: unknown RF Bank %d requested\n",
226 1.1 alc __func__, bank);
227 1.1 alc return AH_NULL;
228 1.1 alc }
229 1.1 alc
230 1.1 alc /*
231 1.1 alc * Return indices surrounding the value in sorted integer lists.
232 1.1 alc *
233 1.1 alc * NB: the input list is assumed to be sorted in ascending order
234 1.1 alc */
235 1.1 alc static void
236 1.1 alc GetLowerUpperIndex(int16_t v, const uint16_t *lp, uint16_t listSize,
237 1.1 alc uint32_t *vlo, uint32_t *vhi)
238 1.1 alc {
239 1.1 alc int16_t target = v;
240 1.1 alc const int16_t *ep = lp+listSize;
241 1.1 alc const int16_t *tp;
242 1.1 alc
243 1.1 alc /*
244 1.1 alc * Check first and last elements for out-of-bounds conditions.
245 1.1 alc */
246 1.1 alc if (target < lp[0]) {
247 1.1 alc *vlo = *vhi = 0;
248 1.1 alc return;
249 1.1 alc }
250 1.1 alc if (target >= ep[-1]) {
251 1.1 alc *vlo = *vhi = listSize - 1;
252 1.1 alc return;
253 1.1 alc }
254 1.1 alc
255 1.1 alc /* look for value being near or between 2 values in list */
256 1.1 alc for (tp = lp; tp < ep; tp++) {
257 1.1 alc /*
258 1.1 alc * If value is close to the current value of the list
259 1.1 alc * then target is not between values, it is one of the values
260 1.1 alc */
261 1.1 alc if (*tp == target) {
262 1.1 alc *vlo = *vhi = tp - (const int16_t *) lp;
263 1.1 alc return;
264 1.1 alc }
265 1.1 alc /*
266 1.1 alc * Look for value being between current value and next value
267 1.1 alc * if so return these 2 values
268 1.1 alc */
269 1.1 alc if (target < tp[1]) {
270 1.1 alc *vlo = tp - (const int16_t *) lp;
271 1.1 alc *vhi = *vlo + 1;
272 1.1 alc return;
273 1.1 alc }
274 1.1 alc }
275 1.1 alc }
276 1.1 alc
277 1.1 alc /*
278 1.1 alc * Fill the Vpdlist for indices Pmax-Pmin
279 1.1 alc */
280 1.1 alc static HAL_BOOL
281 1.1 alc ar2317FillVpdTable(uint32_t pdGainIdx, int16_t Pmin, int16_t Pmax,
282 1.1 alc const int16_t *pwrList, const int16_t *VpdList,
283 1.1 alc uint16_t numIntercepts, uint16_t retVpdList[][64])
284 1.1 alc {
285 1.4 martin uint16_t ii, kk;
286 1.1 alc int16_t currPwr = (int16_t)(2*Pmin);
287 1.1 alc /* since Pmin is pwr*2 and pwrList is 4*pwr */
288 1.3 mrg uint32_t idxL = 0, idxR = 0;
289 1.1 alc
290 1.1 alc ii = 0;
291 1.1 alc
292 1.1 alc if (numIntercepts < 2)
293 1.1 alc return AH_FALSE;
294 1.1 alc
295 1.1 alc while (ii <= (uint16_t)(Pmax - Pmin)) {
296 1.1 alc GetLowerUpperIndex(currPwr, pwrList, numIntercepts,
297 1.1 alc &(idxL), &(idxR));
298 1.1 alc if (idxR < 1)
299 1.1 alc idxR = 1; /* extrapolate below */
300 1.1 alc if (idxL == (uint32_t)(numIntercepts - 1))
301 1.1 alc idxL = numIntercepts - 2; /* extrapolate above */
302 1.1 alc if (pwrList[idxL] == pwrList[idxR])
303 1.1 alc kk = VpdList[idxL];
304 1.1 alc else
305 1.1 alc kk = (uint16_t)
306 1.1 alc (((currPwr - pwrList[idxL])*VpdList[idxR]+
307 1.1 alc (pwrList[idxR] - currPwr)*VpdList[idxL])/
308 1.1 alc (pwrList[idxR] - pwrList[idxL]));
309 1.1 alc retVpdList[pdGainIdx][ii] = kk;
310 1.1 alc ii++;
311 1.1 alc currPwr += 2; /* half dB steps */
312 1.1 alc }
313 1.1 alc
314 1.1 alc return AH_TRUE;
315 1.1 alc }
316 1.1 alc
317 1.1 alc /*
318 1.1 alc * Returns interpolated or the scaled up interpolated value
319 1.1 alc */
320 1.1 alc static int16_t
321 1.1 alc interpolate_signed(uint16_t target, uint16_t srcLeft, uint16_t srcRight,
322 1.1 alc int16_t targetLeft, int16_t targetRight)
323 1.1 alc {
324 1.1 alc int16_t rv;
325 1.1 alc
326 1.1 alc if (srcRight != srcLeft) {
327 1.1 alc rv = ((target - srcLeft)*targetRight +
328 1.1 alc (srcRight - target)*targetLeft) / (srcRight - srcLeft);
329 1.1 alc } else {
330 1.1 alc rv = targetLeft;
331 1.1 alc }
332 1.1 alc return rv;
333 1.1 alc }
334 1.1 alc
335 1.1 alc /*
336 1.1 alc * Uses the data points read from EEPROM to reconstruct the pdadc power table
337 1.1 alc * Called by ar2317SetPowerTable()
338 1.1 alc */
339 1.1 alc static int
340 1.1 alc ar2317getGainBoundariesAndPdadcsForPowers(struct ath_hal *ah, uint16_t channel,
341 1.1 alc const RAW_DATA_STRUCT_2317 *pRawDataset,
342 1.1 alc uint16_t pdGainOverlap_t2,
343 1.1 alc int16_t *pMinCalPower, uint16_t pPdGainBoundaries[],
344 1.1 alc uint16_t pPdGainValues[], uint16_t pPDADCValues[])
345 1.1 alc {
346 1.1 alc struct ar2317State *priv = AR2317(ah);
347 1.1 alc #define VpdTable_L priv->vpdTable_L
348 1.1 alc #define VpdTable_R priv->vpdTable_R
349 1.1 alc #define VpdTable_I priv->vpdTable_I
350 1.1 alc /* XXX excessive stack usage? */
351 1.1 alc uint32_t ii, jj, kk;
352 1.1 alc int32_t ss;/* potentially -ve index for taking care of pdGainOverlap */
353 1.3 mrg uint32_t idxL = 0, idxR = 0;
354 1.1 alc uint32_t numPdGainsUsed = 0;
355 1.1 alc /*
356 1.1 alc * If desired to support -ve power levels in future, just
357 1.1 alc * change pwr_I_0 to signed 5-bits.
358 1.1 alc */
359 1.1 alc int16_t Pmin_t2[MAX_NUM_PDGAINS_PER_CHANNEL];
360 1.1 alc /* to accomodate -ve power levels later on. */
361 1.1 alc int16_t Pmax_t2[MAX_NUM_PDGAINS_PER_CHANNEL];
362 1.1 alc /* to accomodate -ve power levels later on */
363 1.1 alc uint16_t numVpd = 0;
364 1.1 alc uint16_t Vpd_step;
365 1.1 alc int16_t tmpVal ;
366 1.1 alc uint32_t sizeCurrVpdTable, maxIndex, tgtIndex;
367 1.1 alc
368 1.1 alc /* Get upper lower index */
369 1.1 alc GetLowerUpperIndex(channel, pRawDataset->pChannels,
370 1.1 alc pRawDataset->numChannels, &(idxL), &(idxR));
371 1.1 alc
372 1.1 alc for (ii = 0; ii < MAX_NUM_PDGAINS_PER_CHANNEL; ii++) {
373 1.1 alc jj = MAX_NUM_PDGAINS_PER_CHANNEL - ii - 1;
374 1.1 alc /* work backwards 'cause highest pdGain for lowest power */
375 1.1 alc numVpd = pRawDataset->pDataPerChannel[idxL].pDataPerPDGain[jj].numVpd;
376 1.1 alc if (numVpd > 0) {
377 1.1 alc pPdGainValues[numPdGainsUsed] = pRawDataset->pDataPerChannel[idxL].pDataPerPDGain[jj].pd_gain;
378 1.1 alc Pmin_t2[numPdGainsUsed] = pRawDataset->pDataPerChannel[idxL].pDataPerPDGain[jj].pwr_t4[0];
379 1.1 alc if (Pmin_t2[numPdGainsUsed] >pRawDataset->pDataPerChannel[idxR].pDataPerPDGain[jj].pwr_t4[0]) {
380 1.1 alc Pmin_t2[numPdGainsUsed] = pRawDataset->pDataPerChannel[idxR].pDataPerPDGain[jj].pwr_t4[0];
381 1.1 alc }
382 1.1 alc Pmin_t2[numPdGainsUsed] = (int16_t)
383 1.1 alc (Pmin_t2[numPdGainsUsed] / 2);
384 1.1 alc Pmax_t2[numPdGainsUsed] = pRawDataset->pDataPerChannel[idxL].pDataPerPDGain[jj].pwr_t4[numVpd-1];
385 1.1 alc if (Pmax_t2[numPdGainsUsed] > pRawDataset->pDataPerChannel[idxR].pDataPerPDGain[jj].pwr_t4[numVpd-1])
386 1.1 alc Pmax_t2[numPdGainsUsed] =
387 1.1 alc pRawDataset->pDataPerChannel[idxR].pDataPerPDGain[jj].pwr_t4[numVpd-1];
388 1.1 alc Pmax_t2[numPdGainsUsed] = (int16_t)(Pmax_t2[numPdGainsUsed] / 2);
389 1.1 alc ar2317FillVpdTable(
390 1.1 alc numPdGainsUsed, Pmin_t2[numPdGainsUsed], Pmax_t2[numPdGainsUsed],
391 1.1 alc &(pRawDataset->pDataPerChannel[idxL].pDataPerPDGain[jj].pwr_t4[0]),
392 1.1 alc &(pRawDataset->pDataPerChannel[idxL].pDataPerPDGain[jj].Vpd[0]), numVpd, VpdTable_L
393 1.1 alc );
394 1.1 alc ar2317FillVpdTable(
395 1.1 alc numPdGainsUsed, Pmin_t2[numPdGainsUsed], Pmax_t2[numPdGainsUsed],
396 1.1 alc &(pRawDataset->pDataPerChannel[idxR].pDataPerPDGain[jj].pwr_t4[0]),
397 1.1 alc &(pRawDataset->pDataPerChannel[idxR].pDataPerPDGain[jj].Vpd[0]), numVpd, VpdTable_R
398 1.1 alc );
399 1.1 alc for (kk = 0; kk < (uint16_t)(Pmax_t2[numPdGainsUsed] - Pmin_t2[numPdGainsUsed]); kk++) {
400 1.1 alc VpdTable_I[numPdGainsUsed][kk] =
401 1.1 alc interpolate_signed(
402 1.1 alc channel, pRawDataset->pChannels[idxL], pRawDataset->pChannels[idxR],
403 1.1 alc (int16_t)VpdTable_L[numPdGainsUsed][kk], (int16_t)VpdTable_R[numPdGainsUsed][kk]);
404 1.1 alc }
405 1.1 alc /* fill VpdTable_I for this pdGain */
406 1.1 alc numPdGainsUsed++;
407 1.1 alc }
408 1.1 alc /* if this pdGain is used */
409 1.1 alc }
410 1.1 alc
411 1.1 alc *pMinCalPower = Pmin_t2[0];
412 1.1 alc kk = 0; /* index for the final table */
413 1.1 alc for (ii = 0; ii < numPdGainsUsed; ii++) {
414 1.1 alc if (ii == (numPdGainsUsed - 1))
415 1.1 alc pPdGainBoundaries[ii] = Pmax_t2[ii] +
416 1.1 alc PD_GAIN_BOUNDARY_STRETCH_IN_HALF_DB;
417 1.1 alc else
418 1.1 alc pPdGainBoundaries[ii] = (uint16_t)
419 1.1 alc ((Pmax_t2[ii] + Pmin_t2[ii+1]) / 2 );
420 1.1 alc if (pPdGainBoundaries[ii] > 63) {
421 1.1 alc HALDEBUG(ah, HAL_DEBUG_ANY,
422 1.1 alc "%s: clamp pPdGainBoundaries[%d] %d\n",
423 1.1 alc __func__, ii, pPdGainBoundaries[ii]);/*XXX*/
424 1.1 alc pPdGainBoundaries[ii] = 63;
425 1.1 alc }
426 1.1 alc
427 1.1 alc /* Find starting index for this pdGain */
428 1.1 alc if (ii == 0)
429 1.1 alc ss = 0; /* for the first pdGain, start from index 0 */
430 1.1 alc else
431 1.1 alc ss = (pPdGainBoundaries[ii-1] - Pmin_t2[ii]) -
432 1.1 alc pdGainOverlap_t2;
433 1.1 alc Vpd_step = (uint16_t)(VpdTable_I[ii][1] - VpdTable_I[ii][0]);
434 1.1 alc Vpd_step = (uint16_t)((Vpd_step < 1) ? 1 : Vpd_step);
435 1.1 alc /*
436 1.1 alc *-ve ss indicates need to extrapolate data below for this pdGain
437 1.1 alc */
438 1.1 alc while (ss < 0) {
439 1.1 alc tmpVal = (int16_t)(VpdTable_I[ii][0] + ss*Vpd_step);
440 1.1 alc pPDADCValues[kk++] = (uint16_t)((tmpVal < 0) ? 0 : tmpVal);
441 1.1 alc ss++;
442 1.1 alc }
443 1.1 alc
444 1.1 alc sizeCurrVpdTable = Pmax_t2[ii] - Pmin_t2[ii];
445 1.1 alc tgtIndex = pPdGainBoundaries[ii] + pdGainOverlap_t2 - Pmin_t2[ii];
446 1.1 alc maxIndex = (tgtIndex < sizeCurrVpdTable) ? tgtIndex : sizeCurrVpdTable;
447 1.1 alc
448 1.1 alc while (ss < (int16_t)maxIndex)
449 1.1 alc pPDADCValues[kk++] = VpdTable_I[ii][ss++];
450 1.1 alc
451 1.1 alc Vpd_step = (uint16_t)(VpdTable_I[ii][sizeCurrVpdTable-1] -
452 1.1 alc VpdTable_I[ii][sizeCurrVpdTable-2]);
453 1.1 alc Vpd_step = (uint16_t)((Vpd_step < 1) ? 1 : Vpd_step);
454 1.1 alc /*
455 1.1 alc * for last gain, pdGainBoundary == Pmax_t2, so will
456 1.1 alc * have to extrapolate
457 1.1 alc */
458 1.1 alc if (tgtIndex > maxIndex) { /* need to extrapolate above */
459 1.1 alc while(ss < (int16_t)tgtIndex) {
460 1.1 alc tmpVal = (uint16_t)
461 1.1 alc (VpdTable_I[ii][sizeCurrVpdTable-1] +
462 1.1 alc (ss-maxIndex)*Vpd_step);
463 1.1 alc pPDADCValues[kk++] = (tmpVal > 127) ?
464 1.1 alc 127 : tmpVal;
465 1.1 alc ss++;
466 1.1 alc }
467 1.1 alc } /* extrapolated above */
468 1.1 alc } /* for all pdGainUsed */
469 1.1 alc
470 1.1 alc while (ii < MAX_NUM_PDGAINS_PER_CHANNEL) {
471 1.1 alc pPdGainBoundaries[ii] = pPdGainBoundaries[ii-1];
472 1.1 alc ii++;
473 1.1 alc }
474 1.1 alc while (kk < 128) {
475 1.1 alc pPDADCValues[kk] = pPDADCValues[kk-1];
476 1.1 alc kk++;
477 1.1 alc }
478 1.1 alc
479 1.1 alc return numPdGainsUsed;
480 1.1 alc #undef VpdTable_L
481 1.1 alc #undef VpdTable_R
482 1.1 alc #undef VpdTable_I
483 1.1 alc }
484 1.1 alc
485 1.1 alc static HAL_BOOL
486 1.1 alc ar2317SetPowerTable(struct ath_hal *ah,
487 1.1 alc int16_t *minPower, int16_t *maxPower, HAL_CHANNEL_INTERNAL *chan,
488 1.1 alc uint16_t *rfXpdGain)
489 1.1 alc {
490 1.1 alc struct ath_hal_5212 *ahp = AH5212(ah);
491 1.1 alc const HAL_EEPROM *ee = AH_PRIVATE(ah)->ah_eeprom;
492 1.1 alc const RAW_DATA_STRUCT_2317 *pRawDataset = AH_NULL;
493 1.1 alc uint16_t pdGainOverlap_t2;
494 1.1 alc int16_t minCalPower2317_t2;
495 1.1 alc uint16_t *pdadcValues = ahp->ah_pcdacTable;
496 1.1 alc uint16_t gainBoundaries[4];
497 1.1 alc uint32_t reg32, regoffset;
498 1.1 alc int i, numPdGainsUsed;
499 1.1 alc #ifndef AH_USE_INIPDGAIN
500 1.1 alc uint32_t tpcrg1;
501 1.1 alc #endif
502 1.1 alc
503 1.1 alc HALDEBUG(ah, HAL_DEBUG_RFPARAM, "%s: chan 0x%x flag 0x%x\n",
504 1.1 alc __func__, chan->channel,chan->channelFlags);
505 1.1 alc
506 1.1 alc if (IS_CHAN_G(chan) || IS_CHAN_108G(chan))
507 1.1 alc pRawDataset = &ee->ee_rawDataset2413[headerInfo11G];
508 1.1 alc else if (IS_CHAN_B(chan))
509 1.1 alc pRawDataset = &ee->ee_rawDataset2413[headerInfo11B];
510 1.1 alc else {
511 1.1 alc HALDEBUG(ah, HAL_DEBUG_ANY, "%s: illegal mode\n", __func__);
512 1.1 alc return AH_FALSE;
513 1.1 alc }
514 1.1 alc
515 1.1 alc pdGainOverlap_t2 = (uint16_t) SM(OS_REG_READ(ah, AR_PHY_TPCRG5),
516 1.1 alc AR_PHY_TPCRG5_PD_GAIN_OVERLAP);
517 1.1 alc
518 1.1 alc numPdGainsUsed = ar2317getGainBoundariesAndPdadcsForPowers(ah,
519 1.1 alc chan->channel, pRawDataset, pdGainOverlap_t2,
520 1.1 alc &minCalPower2317_t2,gainBoundaries, rfXpdGain, pdadcValues);
521 1.1 alc HALASSERT(1 <= numPdGainsUsed && numPdGainsUsed <= 3);
522 1.1 alc
523 1.1 alc #ifdef AH_USE_INIPDGAIN
524 1.1 alc /*
525 1.1 alc * Use pd_gains curve from eeprom; Atheros always uses
526 1.1 alc * the default curve from the ini file but some vendors
527 1.1 alc * (e.g. Zcomax) want to override this curve and not
528 1.1 alc * honoring their settings results in tx power 5dBm low.
529 1.1 alc */
530 1.1 alc OS_REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_NUM_PD_GAIN,
531 1.1 alc (pRawDataset->pDataPerChannel[0].numPdGains - 1));
532 1.1 alc #else
533 1.1 alc tpcrg1 = OS_REG_READ(ah, AR_PHY_TPCRG1);
534 1.1 alc tpcrg1 = (tpcrg1 &~ AR_PHY_TPCRG1_NUM_PD_GAIN)
535 1.1 alc | SM(numPdGainsUsed-1, AR_PHY_TPCRG1_NUM_PD_GAIN);
536 1.1 alc switch (numPdGainsUsed) {
537 1.1 alc case 3:
538 1.1 alc tpcrg1 &= ~AR_PHY_TPCRG1_PDGAIN_SETTING3;
539 1.1 alc tpcrg1 |= SM(rfXpdGain[2], AR_PHY_TPCRG1_PDGAIN_SETTING3);
540 1.1 alc /* fall thru... */
541 1.1 alc case 2:
542 1.1 alc tpcrg1 &= ~AR_PHY_TPCRG1_PDGAIN_SETTING2;
543 1.1 alc tpcrg1 |= SM(rfXpdGain[1], AR_PHY_TPCRG1_PDGAIN_SETTING2);
544 1.1 alc /* fall thru... */
545 1.1 alc case 1:
546 1.1 alc tpcrg1 &= ~AR_PHY_TPCRG1_PDGAIN_SETTING1;
547 1.1 alc tpcrg1 |= SM(rfXpdGain[0], AR_PHY_TPCRG1_PDGAIN_SETTING1);
548 1.1 alc break;
549 1.1 alc }
550 1.1 alc #ifdef AH_DEBUG
551 1.1 alc if (tpcrg1 != OS_REG_READ(ah, AR_PHY_TPCRG1))
552 1.1 alc HALDEBUG(ah, HAL_DEBUG_RFPARAM, "%s: using non-default "
553 1.1 alc "pd_gains (default 0x%x, calculated 0x%x)\n",
554 1.1 alc __func__, OS_REG_READ(ah, AR_PHY_TPCRG1), tpcrg1);
555 1.1 alc #endif
556 1.1 alc OS_REG_WRITE(ah, AR_PHY_TPCRG1, tpcrg1);
557 1.1 alc #endif
558 1.1 alc
559 1.1 alc /*
560 1.1 alc * Note the pdadc table may not start at 0 dBm power, could be
561 1.1 alc * negative or greater than 0. Need to offset the power
562 1.1 alc * values by the amount of minPower for griffin
563 1.1 alc */
564 1.1 alc if (minCalPower2317_t2 != 0)
565 1.1 alc ahp->ah_txPowerIndexOffset = (int16_t)(0 - minCalPower2317_t2);
566 1.1 alc else
567 1.1 alc ahp->ah_txPowerIndexOffset = 0;
568 1.1 alc
569 1.1 alc /* Finally, write the power values into the baseband power table */
570 1.1 alc regoffset = 0x9800 + (672 <<2); /* beginning of pdadc table in griffin */
571 1.1 alc for (i = 0; i < 32; i++) {
572 1.1 alc reg32 = ((pdadcValues[4*i + 0] & 0xFF) << 0) |
573 1.1 alc ((pdadcValues[4*i + 1] & 0xFF) << 8) |
574 1.1 alc ((pdadcValues[4*i + 2] & 0xFF) << 16) |
575 1.1 alc ((pdadcValues[4*i + 3] & 0xFF) << 24) ;
576 1.1 alc OS_REG_WRITE(ah, regoffset, reg32);
577 1.1 alc regoffset += 4;
578 1.1 alc }
579 1.1 alc
580 1.1 alc OS_REG_WRITE(ah, AR_PHY_TPCRG5,
581 1.1 alc SM(pdGainOverlap_t2, AR_PHY_TPCRG5_PD_GAIN_OVERLAP) |
582 1.1 alc SM(gainBoundaries[0], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1) |
583 1.1 alc SM(gainBoundaries[1], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2) |
584 1.1 alc SM(gainBoundaries[2], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3) |
585 1.1 alc SM(gainBoundaries[3], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4));
586 1.1 alc
587 1.1 alc return AH_TRUE;
588 1.1 alc }
589 1.1 alc
590 1.1 alc static int16_t
591 1.1 alc ar2317GetMinPower(struct ath_hal *ah, const RAW_DATA_PER_CHANNEL_2317 *data)
592 1.1 alc {
593 1.1 alc uint32_t ii,jj;
594 1.1 alc uint16_t Pmin=0,numVpd;
595 1.1 alc
596 1.1 alc for (ii = 0; ii < MAX_NUM_PDGAINS_PER_CHANNEL; ii++) {
597 1.1 alc jj = MAX_NUM_PDGAINS_PER_CHANNEL - ii - 1;
598 1.1 alc /* work backwards 'cause highest pdGain for lowest power */
599 1.1 alc numVpd = data->pDataPerPDGain[jj].numVpd;
600 1.1 alc if (numVpd > 0) {
601 1.1 alc Pmin = data->pDataPerPDGain[jj].pwr_t4[0];
602 1.1 alc return(Pmin);
603 1.1 alc }
604 1.1 alc }
605 1.1 alc return(Pmin);
606 1.1 alc }
607 1.1 alc
608 1.1 alc static int16_t
609 1.1 alc ar2317GetMaxPower(struct ath_hal *ah, const RAW_DATA_PER_CHANNEL_2317 *data)
610 1.1 alc {
611 1.1 alc uint32_t ii;
612 1.1 alc uint16_t Pmax=0,numVpd;
613 1.1 alc
614 1.1 alc for (ii=0; ii< MAX_NUM_PDGAINS_PER_CHANNEL; ii++) {
615 1.1 alc /* work forwards cuase lowest pdGain for highest power */
616 1.1 alc numVpd = data->pDataPerPDGain[ii].numVpd;
617 1.1 alc if (numVpd > 0) {
618 1.1 alc Pmax = data->pDataPerPDGain[ii].pwr_t4[numVpd-1];
619 1.1 alc return(Pmax);
620 1.1 alc }
621 1.1 alc }
622 1.1 alc return(Pmax);
623 1.1 alc }
624 1.1 alc
625 1.1 alc static HAL_BOOL
626 1.1 alc ar2317GetChannelMaxMinPower(struct ath_hal *ah, HAL_CHANNEL *chan,
627 1.1 alc int16_t *maxPow, int16_t *minPow)
628 1.1 alc {
629 1.1 alc const HAL_EEPROM *ee = AH_PRIVATE(ah)->ah_eeprom;
630 1.1 alc const RAW_DATA_STRUCT_2317 *pRawDataset = AH_NULL;
631 1.1 alc const RAW_DATA_PER_CHANNEL_2317 *data=AH_NULL;
632 1.1 alc uint16_t numChannels;
633 1.1 alc int totalD,totalF, totalMin,last, i;
634 1.1 alc
635 1.1 alc *maxPow = 0;
636 1.1 alc
637 1.1 alc if (IS_CHAN_G(chan) || IS_CHAN_108G(chan))
638 1.1 alc pRawDataset = &ee->ee_rawDataset2413[headerInfo11G];
639 1.1 alc else if (IS_CHAN_B(chan))
640 1.1 alc pRawDataset = &ee->ee_rawDataset2413[headerInfo11B];
641 1.1 alc else
642 1.1 alc return(AH_FALSE);
643 1.1 alc
644 1.1 alc numChannels = pRawDataset->numChannels;
645 1.1 alc data = pRawDataset->pDataPerChannel;
646 1.1 alc
647 1.1 alc /* Make sure the channel is in the range of the TP values
648 1.1 alc * (freq piers)
649 1.1 alc */
650 1.1 alc if (numChannels < 1)
651 1.1 alc return(AH_FALSE);
652 1.1 alc
653 1.1 alc if ((chan->channel < data[0].channelValue) ||
654 1.1 alc (chan->channel > data[numChannels-1].channelValue)) {
655 1.1 alc if (chan->channel < data[0].channelValue) {
656 1.1 alc *maxPow = ar2317GetMaxPower(ah, &data[0]);
657 1.1 alc *minPow = ar2317GetMinPower(ah, &data[0]);
658 1.1 alc return(AH_TRUE);
659 1.1 alc } else {
660 1.1 alc *maxPow = ar2317GetMaxPower(ah, &data[numChannels - 1]);
661 1.1 alc *minPow = ar2317GetMinPower(ah, &data[numChannels - 1]);
662 1.1 alc return(AH_TRUE);
663 1.1 alc }
664 1.1 alc }
665 1.1 alc
666 1.1 alc /* Linearly interpolate the power value now */
667 1.1 alc for (last=0,i=0; (i<numChannels) && (chan->channel > data[i].channelValue);
668 1.1 alc last = i++);
669 1.1 alc totalD = data[i].channelValue - data[last].channelValue;
670 1.1 alc if (totalD > 0) {
671 1.1 alc totalF = ar2317GetMaxPower(ah, &data[i]) - ar2317GetMaxPower(ah, &data[last]);
672 1.1 alc *maxPow = (int8_t) ((totalF*(chan->channel-data[last].channelValue) +
673 1.1 alc ar2317GetMaxPower(ah, &data[last])*totalD)/totalD);
674 1.1 alc totalMin = ar2317GetMinPower(ah, &data[i]) - ar2317GetMinPower(ah, &data[last]);
675 1.1 alc *minPow = (int8_t) ((totalMin*(chan->channel-data[last].channelValue) +
676 1.1 alc ar2317GetMinPower(ah, &data[last])*totalD)/totalD);
677 1.1 alc return(AH_TRUE);
678 1.1 alc } else {
679 1.1 alc if (chan->channel == data[i].channelValue) {
680 1.1 alc *maxPow = ar2317GetMaxPower(ah, &data[i]);
681 1.1 alc *minPow = ar2317GetMinPower(ah, &data[i]);
682 1.1 alc return(AH_TRUE);
683 1.1 alc } else
684 1.1 alc return(AH_FALSE);
685 1.1 alc }
686 1.1 alc }
687 1.1 alc
688 1.1 alc /*
689 1.1 alc * Free memory for analog bank scratch buffers
690 1.1 alc */
691 1.1 alc static void
692 1.1 alc ar2317RfDetach(struct ath_hal *ah)
693 1.1 alc {
694 1.1 alc struct ath_hal_5212 *ahp = AH5212(ah);
695 1.1 alc
696 1.1 alc HALASSERT(ahp->ah_rfHal != AH_NULL);
697 1.1 alc ath_hal_free(ahp->ah_rfHal);
698 1.1 alc ahp->ah_rfHal = AH_NULL;
699 1.1 alc }
700 1.1 alc
701 1.1 alc /*
702 1.1 alc * Allocate memory for analog bank scratch buffers
703 1.1 alc * Scratch Buffer will be reinitialized every reset so no need to zero now
704 1.1 alc */
705 1.1 alc static HAL_BOOL
706 1.1 alc ar2317RfAttach(struct ath_hal *ah, HAL_STATUS *status)
707 1.1 alc {
708 1.1 alc struct ath_hal_5212 *ahp = AH5212(ah);
709 1.1 alc struct ar2317State *priv;
710 1.1 alc
711 1.1 alc HALASSERT(ah->ah_magic == AR5212_MAGIC);
712 1.1 alc
713 1.1 alc HALASSERT(ahp->ah_rfHal == AH_NULL);
714 1.1 alc priv = ath_hal_malloc(sizeof(struct ar2317State));
715 1.1 alc if (priv == AH_NULL) {
716 1.1 alc HALDEBUG(ah, HAL_DEBUG_ANY,
717 1.1 alc "%s: cannot allocate private state\n", __func__);
718 1.1 alc *status = HAL_ENOMEM; /* XXX */
719 1.1 alc return AH_FALSE;
720 1.1 alc }
721 1.1 alc priv->base.rfDetach = ar2317RfDetach;
722 1.1 alc priv->base.writeRegs = ar2317WriteRegs;
723 1.1 alc priv->base.getRfBank = ar2317GetRfBank;
724 1.1 alc priv->base.setChannel = ar2317SetChannel;
725 1.1 alc priv->base.setRfRegs = ar2317SetRfRegs;
726 1.1 alc priv->base.setPowerTable = ar2317SetPowerTable;
727 1.1 alc priv->base.getChannelMaxMinPower = ar2317GetChannelMaxMinPower;
728 1.1 alc priv->base.getNfAdjust = ar5212GetNfAdjust;
729 1.1 alc
730 1.1 alc ahp->ah_pcdacTable = priv->pcdacTable;
731 1.1 alc ahp->ah_pcdacTableSize = sizeof(priv->pcdacTable);
732 1.1 alc ahp->ah_rfHal = &priv->base;
733 1.1 alc
734 1.1 alc return AH_TRUE;
735 1.1 alc }
736 1.1 alc
737 1.1 alc static HAL_BOOL
738 1.1 alc ar2317Probe(struct ath_hal *ah)
739 1.1 alc {
740 1.1 alc return IS_2317(ah);
741 1.1 alc }
742 1.1 alc AH_RF(RF2317, ar2317Probe, ar2317RfAttach);
743