Home | History | Annotate | Line # | Download | only in ar5416
ar9160_attach.c revision 1.1.1.1.8.2
      1 /*
      2  * Copyright (c) 2008 Sam Leffler, Errno Consulting
      3  * Copyright (c) 2008 Atheros Communications, Inc.
      4  *
      5  * Permission to use, copy, modify, and/or distribute this software for any
      6  * purpose with or without fee is hereby granted, provided that the above
      7  * copyright notice and this permission notice appear in all copies.
      8  *
      9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
     10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
     11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
     12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
     13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
     14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
     15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
     16  *
     17  * $Id: ar9160_attach.c,v 1.1.1.1.8.2 2009/05/04 08:13:41 yamt Exp $
     18  */
     19 #include "opt_ah.h"
     20 
     21 #include "ah.h"
     22 #include "ah_internal.h"
     23 #include "ah_devid.h"
     24 
     25 #include "ar5416/ar5416.h"
     26 #include "ar5416/ar5416reg.h"
     27 #include "ar5416/ar5416phy.h"
     28 
     29 #include "ar5416/ar9160.ini"
     30 
     31 static const HAL_PERCAL_DATA ar9160_iq_cal = {		/* multi sample */
     32 	.calName = "IQ", .calType = IQ_MISMATCH_CAL,
     33 	.calNumSamples	= MAX_CAL_SAMPLES,
     34 	.calCountMax	= PER_MIN_LOG_COUNT,
     35 	.calCollect	= ar5416IQCalCollect,
     36 	.calPostProc	= ar5416IQCalibration
     37 };
     38 static const HAL_PERCAL_DATA ar9160_adc_gain_cal = {	/* multi sample */
     39 	.calName = "ADC Gain", .calType = ADC_GAIN_CAL,
     40 	.calNumSamples	= MAX_CAL_SAMPLES,
     41 	.calCountMax	= PER_MIN_LOG_COUNT,
     42 	.calCollect	= ar5416AdcGainCalCollect,
     43 	.calPostProc	= ar5416AdcGainCalibration
     44 };
     45 static const HAL_PERCAL_DATA ar9160_adc_dc_cal = {	/* multi sample */
     46 	.calName = "ADC DC", .calType = ADC_DC_CAL,
     47 	.calNumSamples	= MAX_CAL_SAMPLES,
     48 	.calCountMax	= PER_MIN_LOG_COUNT,
     49 	.calCollect	= ar5416AdcDcCalCollect,
     50 	.calPostProc	= ar5416AdcDcCalibration
     51 };
     52 static const HAL_PERCAL_DATA ar9160_adc_init_dc_cal = {
     53 	.calName = "ADC Init DC", .calType = ADC_DC_INIT_CAL,
     54 	.calNumSamples	= MIN_CAL_SAMPLES,
     55 	.calCountMax	= INIT_LOG_COUNT,
     56 	.calCollect	= ar5416AdcDcCalCollect,
     57 	.calPostProc	= ar5416AdcDcCalibration
     58 };
     59 
     60 struct ath_hal *ar9160Attach(uint16_t devid, HAL_SOFTC sc,
     61 	HAL_BUS_TAG st, HAL_BUS_HANDLE sh, HAL_STATUS *status);
     62 static void ar9160Detach(struct ath_hal *);
     63 static HAL_BOOL ar9160FillCapabilityInfo(struct ath_hal *ah);
     64 
     65 static void
     66 ar9160AniSetup(struct ath_hal *ah)
     67 {
     68 	static const struct ar5212AniParams aniparams = {
     69 		.maxNoiseImmunityLevel	= 4,	/* levels 0..4 */
     70 		.totalSizeDesired	= { -55, -55, -55, -55, -62 },
     71 		.coarseHigh		= { -14, -14, -14, -14, -12 },
     72 		.coarseLow		= { -64, -64, -64, -64, -70 },
     73 		.firpwr			= { -78, -78, -78, -78, -80 },
     74 		.maxSpurImmunityLevel	= 2,
     75 		.cycPwrThr1		= { 2, 4, 6 },
     76 		.maxFirstepLevel	= 2,	/* levels 0..2 */
     77 		.firstep		= { 0, 4, 8 },
     78 		.ofdmTrigHigh		= 500,
     79 		.ofdmTrigLow		= 200,
     80 		.cckTrigHigh		= 200,
     81 		.cckTrigLow		= 100,
     82 		.rssiThrHigh		= 40,
     83 		.rssiThrLow		= 7,
     84 		.period			= 100,
     85 	};
     86 	/* NB: ANI is not enabled yet */
     87 	ar5212AniAttach(ah, &aniparams, &aniparams, AH_FALSE);
     88 }
     89 
     90 /*
     91  * Attach for an AR9160 part.
     92  */
     93 struct ath_hal *
     94 ar9160Attach(uint16_t devid, HAL_SOFTC sc,
     95 	HAL_BUS_TAG st, HAL_BUS_HANDLE sh, HAL_STATUS *status)
     96 {
     97 	struct ath_hal_5416 *ahp5416;
     98 	struct ath_hal_5212 *ahp;
     99 	struct ath_hal *ah;
    100 	uint32_t val;
    101 	HAL_STATUS ecode;
    102 	HAL_BOOL rfStatus;
    103 
    104 	HALDEBUG(AH_NULL, HAL_DEBUG_ATTACH, "%s: sc %p st %p sh %p\n",
    105 	    __func__, sc, (void*) st, (void*) sh);
    106 
    107 	/* NB: memory is returned zero'd */
    108 	ahp5416 = ath_hal_malloc(sizeof (struct ath_hal_5416));
    109 	if (ahp5416 == AH_NULL) {
    110 		HALDEBUG(AH_NULL, HAL_DEBUG_ANY,
    111 		    "%s: cannot allocate memory for state block\n", __func__);
    112 		*status = HAL_ENOMEM;
    113 		return AH_NULL;
    114 	}
    115 	ar5416InitState(ahp5416, devid, sc, st, sh, status);
    116 	ahp = &ahp5416->ah_5212;
    117 	ah = &ahp->ah_priv.h;
    118 
    119 	/* XXX override with 9160 specific state */
    120 	/* override 5416 methods for our needs */
    121 	ah->ah_detach			= ar9160Detach;
    122 
    123 	AH5416(ah)->ah_cal.iqCalData.calData = &ar9160_iq_cal;
    124 	AH5416(ah)->ah_cal.adcGainCalData.calData = &ar9160_adc_gain_cal;
    125 	AH5416(ah)->ah_cal.adcDcCalData.calData = &ar9160_adc_dc_cal;
    126 	AH5416(ah)->ah_cal.adcDcCalInitData.calData = &ar9160_adc_init_dc_cal;
    127 	AH5416(ah)->ah_cal.suppCals = ADC_GAIN_CAL | ADC_DC_CAL | IQ_MISMATCH_CAL;
    128 
    129 	if (!ar5416SetResetReg(ah, HAL_RESET_POWER_ON)) {
    130 		/* reset chip */
    131 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: couldn't reset chip\n",
    132 		    __func__);
    133 		ecode = HAL_EIO;
    134 		goto bad;
    135 	}
    136 
    137 	if (!ar5416SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) {
    138 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: couldn't wakeup chip\n",
    139 		    __func__);
    140 		ecode = HAL_EIO;
    141 		goto bad;
    142 	}
    143 	/* Read Revisions from Chips before taking out of reset */
    144 	val = OS_REG_READ(ah, AR_SREV);
    145 	HALDEBUG(ah, HAL_DEBUG_ATTACH,
    146 	    "%s: ID 0x%x VERSION 0x%x TYPE 0x%x REVISION 0x%x\n",
    147 	    __func__, MS(val, AR_XSREV_ID), MS(val, AR_XSREV_VERSION),
    148 	    MS(val, AR_XSREV_TYPE), MS(val, AR_XSREV_REVISION));
    149 	/* NB: include chip type to differentiate from pre-Sowl versions */
    150 	AH_PRIVATE(ah)->ah_macVersion =
    151 	    (val & AR_XSREV_VERSION) >> AR_XSREV_TYPE_S;
    152 	AH_PRIVATE(ah)->ah_macRev = MS(val, AR_XSREV_REVISION);
    153 	/* XXX extract pcie info */
    154 
    155 	/* setup common ini data; rf backends handle remainder */
    156 	HAL_INI_INIT(&ahp->ah_ini_modes, ar9160Modes, 6);
    157 	HAL_INI_INIT(&ahp->ah_ini_common, ar9160Common, 2);
    158 
    159 	HAL_INI_INIT(&AH5416(ah)->ah_ini_bb_rfgain, ar9160BB_RfGain, 3);
    160 	HAL_INI_INIT(&AH5416(ah)->ah_ini_bank0, ar9160Bank0, 2);
    161 	HAL_INI_INIT(&AH5416(ah)->ah_ini_bank1, ar9160Bank1, 2);
    162 	HAL_INI_INIT(&AH5416(ah)->ah_ini_bank2, ar9160Bank2, 2);
    163 	HAL_INI_INIT(&AH5416(ah)->ah_ini_bank3, ar9160Bank3, 3);
    164 	HAL_INI_INIT(&AH5416(ah)->ah_ini_bank6, ar9160Bank6, 3);
    165 	HAL_INI_INIT(&AH5416(ah)->ah_ini_bank7, ar9160Bank7, 2);
    166 	if (AR_SREV_SOWL_11(ah))
    167 		HAL_INI_INIT(&AH5416(ah)->ah_ini_addac, ar9160Addac_1_1, 2);
    168 	else
    169 		HAL_INI_INIT(&AH5416(ah)->ah_ini_addac, ar9160Addac, 2);
    170 
    171 	if (!ar5416ChipReset(ah, AH_NULL)) {	/* reset chip */
    172 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n", __func__);
    173 		ecode = HAL_EIO;
    174 		goto bad;
    175 	}
    176 
    177 	AH_PRIVATE(ah)->ah_phyRev = OS_REG_READ(ah, AR_PHY_CHIP_ID);
    178 
    179 	if (!ar5212ChipTest(ah)) {
    180 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: hardware self-test failed\n",
    181 		    __func__);
    182 		ecode = HAL_ESELFTEST;
    183 		goto bad;
    184 	}
    185 
    186 	/*
    187 	 * Set correct Baseband to analog shift
    188 	 * setting to access analog chips.
    189 	 */
    190 	OS_REG_WRITE(ah, AR_PHY(0), 0x00000007);
    191 
    192 	/* Read Radio Chip Rev Extract */
    193 	AH_PRIVATE(ah)->ah_analog5GhzRev = ar5212GetRadioRev(ah);
    194 	switch (AH_PRIVATE(ah)->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR) {
    195         case AR_RAD2133_SREV_MAJOR:	/* Sowl: 2G/3x3 */
    196 	case AR_RAD5133_SREV_MAJOR:	/* Sowl: 2+5G/3x3 */
    197 		break;
    198 	default:
    199 		if (AH_PRIVATE(ah)->ah_analog5GhzRev == 0) {
    200 			AH_PRIVATE(ah)->ah_analog5GhzRev =
    201 				AR_RAD5133_SREV_MAJOR;
    202 			break;
    203 		}
    204 #ifdef AH_DEBUG
    205 		HALDEBUG(ah, HAL_DEBUG_ANY,
    206 		    "%s: 5G Radio Chip Rev 0x%02X is not supported by "
    207 		    "this driver\n", __func__,
    208 		    AH_PRIVATE(ah)->ah_analog5GhzRev);
    209 		ecode = HAL_ENOTSUPP;
    210 		goto bad;
    211 #endif
    212 	}
    213 	HALDEBUG(ah, HAL_DEBUG_ATTACH, "%s: Attaching AR2133 radio\n",
    214 	    __func__);
    215 	rfStatus = ar2133RfAttach(ah, &ecode);
    216 	if (!rfStatus) {
    217 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: RF setup failed, status %u\n",
    218 		    __func__, ecode);
    219 		goto bad;
    220 	}
    221 
    222 	ecode = ath_hal_v14EepromAttach(ah);
    223 	if (ecode != HAL_OK)
    224 		goto bad;
    225 
    226 	/*
    227 	 * Got everything we need now to setup the capabilities.
    228 	 */
    229 	if (!ar9160FillCapabilityInfo(ah)) {
    230 		ecode = HAL_EEREAD;
    231 		goto bad;
    232 	}
    233 
    234 	ecode = ath_hal_eepromGet(ah, AR_EEP_MACADDR, ahp->ah_macaddr);
    235 	if (ecode != HAL_OK) {
    236 		HALDEBUG(ah, HAL_DEBUG_ANY,
    237 		    "%s: error getting mac address from EEPROM\n", __func__);
    238 		goto bad;
    239         }
    240 	/* XXX How about the serial number ? */
    241 	/* Read Reg Domain */
    242 	AH_PRIVATE(ah)->ah_currentRD =
    243 	    ath_hal_eepromGet(ah, AR_EEP_REGDMN_0, AH_NULL);
    244 
    245 	/*
    246 	 * ah_miscMode is populated by ar5416FillCapabilityInfo()
    247 	 * starting from griffin. Set here to make sure that
    248 	 * AR_MISC_MODE_MIC_NEW_LOC_ENABLE is set before a GTK is
    249 	 * placed into hardware.
    250 	 */
    251 	if (ahp->ah_miscMode != 0)
    252 		OS_REG_WRITE(ah, AR_MISC_MODE, ahp->ah_miscMode);
    253 
    254 	ar9160AniSetup(ah);			/* Anti Noise Immunity */
    255 	ar5416InitNfHistBuff(AH5416(ah)->ah_cal.nfCalHist);
    256 
    257 	HALDEBUG(ah, HAL_DEBUG_ATTACH, "%s: return\n", __func__);
    258 
    259 	return ah;
    260 bad:
    261 	if (ahp)
    262 		ar9160Detach((struct ath_hal *) ahp);
    263 	if (status)
    264 		*status = ecode;
    265 	return AH_NULL;
    266 }
    267 
    268 void
    269 ar9160Detach(struct ath_hal *ah)
    270 {
    271 	HALDEBUG(ah, HAL_DEBUG_ATTACH, "%s:\n", __func__);
    272 
    273 	HALASSERT(ah != AH_NULL);
    274 	HALASSERT(ah->ah_magic == AR5416_MAGIC);
    275 
    276 	ar5416Detach(ah);
    277 }
    278 
    279 /*
    280  * Fill all software cached or static hardware state information.
    281  * Return failure if capabilities are to come from EEPROM and
    282  * cannot be read.
    283  */
    284 static HAL_BOOL
    285 ar9160FillCapabilityInfo(struct ath_hal *ah)
    286 {
    287 	HAL_CAPABILITIES *pCap = &AH_PRIVATE(ah)->ah_caps;
    288 
    289 	if (!ar5416FillCapabilityInfo(ah))
    290 		return AH_FALSE;
    291 	pCap->halCSTSupport = AH_TRUE;
    292 	pCap->halRifsRxSupport = AH_TRUE;
    293 	pCap->halRifsTxSupport = AH_TRUE;
    294 	pCap->halRtsAggrLimit = 64*1024;	/* 802.11n max */
    295 	pCap->halExtChanDfsSupport = AH_TRUE;
    296 	pCap->halAutoSleepSupport = AH_FALSE;	/* XXX? */
    297 	return AH_TRUE;
    298 }
    299 
    300 static const char*
    301 ar9160Probe(uint16_t vendorid, uint16_t devid)
    302 {
    303 	if (vendorid == ATHEROS_VENDOR_ID && devid == AR9160_DEVID_PCI)
    304 		return "Atheros 9160";
    305 	return AH_NULL;
    306 }
    307 AH_CHIP(AR9160, ar9160Probe, ar9160Attach);
    308