kern_resource.c revision 1.190 1 /* $NetBSD: kern_resource.c,v 1.190 2023/07/08 11:42:03 riastradh Exp $ */
2
3 /*-
4 * Copyright (c) 1982, 1986, 1991, 1993
5 * The Regents of the University of California. All rights reserved.
6 * (c) UNIX System Laboratories, Inc.
7 * All or some portions of this file are derived from material licensed
8 * to the University of California by American Telephone and Telegraph
9 * Co. or Unix System Laboratories, Inc. and are reproduced herein with
10 * the permission of UNIX System Laboratories, Inc.
11 *
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
14 * are met:
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions and the following disclaimer.
17 * 2. Redistributions in binary form must reproduce the above copyright
18 * notice, this list of conditions and the following disclaimer in the
19 * documentation and/or other materials provided with the distribution.
20 * 3. Neither the name of the University nor the names of its contributors
21 * may be used to endorse or promote products derived from this software
22 * without specific prior written permission.
23 *
24 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
25 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
30 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
31 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
32 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
33 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34 * SUCH DAMAGE.
35 *
36 * @(#)kern_resource.c 8.8 (Berkeley) 2/14/95
37 */
38
39 #include <sys/cdefs.h>
40 __KERNEL_RCSID(0, "$NetBSD: kern_resource.c,v 1.190 2023/07/08 11:42:03 riastradh Exp $");
41
42 #include <sys/param.h>
43 #include <sys/systm.h>
44 #include <sys/kernel.h>
45 #include <sys/file.h>
46 #include <sys/resourcevar.h>
47 #include <sys/kmem.h>
48 #include <sys/namei.h>
49 #include <sys/pool.h>
50 #include <sys/proc.h>
51 #include <sys/sysctl.h>
52 #include <sys/timevar.h>
53 #include <sys/kauth.h>
54 #include <sys/atomic.h>
55 #include <sys/mount.h>
56 #include <sys/syscallargs.h>
57 #include <sys/atomic.h>
58
59 #include <uvm/uvm_extern.h>
60
61 /*
62 * Maximum process data and stack limits.
63 * They are variables so they are patchable.
64 */
65 rlim_t maxdmap = MAXDSIZ;
66 rlim_t maxsmap = MAXSSIZ;
67
68 static pool_cache_t plimit_cache __read_mostly;
69 static pool_cache_t pstats_cache __read_mostly;
70
71 static kauth_listener_t resource_listener;
72 static struct sysctllog *proc_sysctllog;
73
74 static int donice(struct lwp *, struct proc *, int);
75 static void sysctl_proc_setup(void);
76
77 static int
78 resource_listener_cb(kauth_cred_t cred, kauth_action_t action, void *cookie,
79 void *arg0, void *arg1, void *arg2, void *arg3)
80 {
81 struct proc *p;
82 int result;
83
84 result = KAUTH_RESULT_DEFER;
85 p = arg0;
86
87 switch (action) {
88 case KAUTH_PROCESS_NICE:
89 if (kauth_cred_geteuid(cred) != kauth_cred_geteuid(p->p_cred) &&
90 kauth_cred_getuid(cred) != kauth_cred_geteuid(p->p_cred)) {
91 break;
92 }
93
94 if ((u_long)arg1 >= p->p_nice)
95 result = KAUTH_RESULT_ALLOW;
96
97 break;
98
99 case KAUTH_PROCESS_RLIMIT: {
100 enum kauth_process_req req;
101
102 req = (enum kauth_process_req)(uintptr_t)arg1;
103
104 switch (req) {
105 case KAUTH_REQ_PROCESS_RLIMIT_GET:
106 result = KAUTH_RESULT_ALLOW;
107 break;
108
109 case KAUTH_REQ_PROCESS_RLIMIT_SET: {
110 struct rlimit *new_rlimit;
111 u_long which;
112
113 if ((p != curlwp->l_proc) &&
114 (proc_uidmatch(cred, p->p_cred) != 0))
115 break;
116
117 new_rlimit = arg2;
118 which = (u_long)arg3;
119
120 if (new_rlimit->rlim_max <= p->p_rlimit[which].rlim_max)
121 result = KAUTH_RESULT_ALLOW;
122
123 break;
124 }
125
126 default:
127 break;
128 }
129
130 break;
131 }
132
133 default:
134 break;
135 }
136
137 return result;
138 }
139
140 void
141 resource_init(void)
142 {
143
144 plimit_cache = pool_cache_init(sizeof(struct plimit), 0, 0, 0,
145 "plimitpl", NULL, IPL_NONE, NULL, NULL, NULL);
146 pstats_cache = pool_cache_init(sizeof(struct pstats), 0, 0, 0,
147 "pstatspl", NULL, IPL_NONE, NULL, NULL, NULL);
148
149 resource_listener = kauth_listen_scope(KAUTH_SCOPE_PROCESS,
150 resource_listener_cb, NULL);
151
152 sysctl_proc_setup();
153 }
154
155 /*
156 * Resource controls and accounting.
157 */
158
159 int
160 sys_getpriority(struct lwp *l, const struct sys_getpriority_args *uap,
161 register_t *retval)
162 {
163 /* {
164 syscallarg(int) which;
165 syscallarg(id_t) who;
166 } */
167 struct proc *curp = l->l_proc, *p;
168 id_t who = SCARG(uap, who);
169 int low = NZERO + PRIO_MAX + 1;
170
171 mutex_enter(&proc_lock);
172 switch (SCARG(uap, which)) {
173 case PRIO_PROCESS:
174 p = who ? proc_find(who) : curp;
175 if (p != NULL)
176 low = p->p_nice;
177 break;
178
179 case PRIO_PGRP: {
180 struct pgrp *pg;
181
182 if (who == 0)
183 pg = curp->p_pgrp;
184 else if ((pg = pgrp_find(who)) == NULL)
185 break;
186 LIST_FOREACH(p, &pg->pg_members, p_pglist) {
187 if (p->p_nice < low)
188 low = p->p_nice;
189 }
190 break;
191 }
192
193 case PRIO_USER:
194 if (who == 0)
195 who = (int)kauth_cred_geteuid(l->l_cred);
196 PROCLIST_FOREACH(p, &allproc) {
197 mutex_enter(p->p_lock);
198 if (kauth_cred_geteuid(p->p_cred) ==
199 (uid_t)who && p->p_nice < low)
200 low = p->p_nice;
201 mutex_exit(p->p_lock);
202 }
203 break;
204
205 default:
206 mutex_exit(&proc_lock);
207 return EINVAL;
208 }
209 mutex_exit(&proc_lock);
210
211 if (low == NZERO + PRIO_MAX + 1) {
212 return ESRCH;
213 }
214 *retval = low - NZERO;
215 return 0;
216 }
217
218 int
219 sys_setpriority(struct lwp *l, const struct sys_setpriority_args *uap,
220 register_t *retval)
221 {
222 /* {
223 syscallarg(int) which;
224 syscallarg(id_t) who;
225 syscallarg(int) prio;
226 } */
227 struct proc *curp = l->l_proc, *p;
228 id_t who = SCARG(uap, who);
229 int found = 0, error = 0;
230
231 mutex_enter(&proc_lock);
232 switch (SCARG(uap, which)) {
233 case PRIO_PROCESS:
234 p = who ? proc_find(who) : curp;
235 if (p != NULL) {
236 mutex_enter(p->p_lock);
237 found++;
238 error = donice(l, p, SCARG(uap, prio));
239 mutex_exit(p->p_lock);
240 }
241 break;
242
243 case PRIO_PGRP: {
244 struct pgrp *pg;
245
246 if (who == 0)
247 pg = curp->p_pgrp;
248 else if ((pg = pgrp_find(who)) == NULL)
249 break;
250 LIST_FOREACH(p, &pg->pg_members, p_pglist) {
251 mutex_enter(p->p_lock);
252 found++;
253 error = donice(l, p, SCARG(uap, prio));
254 mutex_exit(p->p_lock);
255 if (error)
256 break;
257 }
258 break;
259 }
260
261 case PRIO_USER:
262 if (who == 0)
263 who = (int)kauth_cred_geteuid(l->l_cred);
264 PROCLIST_FOREACH(p, &allproc) {
265 mutex_enter(p->p_lock);
266 if (kauth_cred_geteuid(p->p_cred) ==
267 (uid_t)SCARG(uap, who)) {
268 found++;
269 error = donice(l, p, SCARG(uap, prio));
270 }
271 mutex_exit(p->p_lock);
272 if (error)
273 break;
274 }
275 break;
276
277 default:
278 mutex_exit(&proc_lock);
279 return EINVAL;
280 }
281 mutex_exit(&proc_lock);
282
283 return (found == 0) ? ESRCH : error;
284 }
285
286 /*
287 * Renice a process.
288 *
289 * Call with the target process' credentials locked.
290 */
291 static int
292 donice(struct lwp *l, struct proc *chgp, int n)
293 {
294 kauth_cred_t cred = l->l_cred;
295
296 KASSERT(mutex_owned(chgp->p_lock));
297
298 if (kauth_cred_geteuid(cred) && kauth_cred_getuid(cred) &&
299 kauth_cred_geteuid(cred) != kauth_cred_geteuid(chgp->p_cred) &&
300 kauth_cred_getuid(cred) != kauth_cred_geteuid(chgp->p_cred))
301 return EPERM;
302
303 if (n > PRIO_MAX) {
304 n = PRIO_MAX;
305 }
306 if (n < PRIO_MIN) {
307 n = PRIO_MIN;
308 }
309 n += NZERO;
310
311 if (kauth_authorize_process(cred, KAUTH_PROCESS_NICE, chgp,
312 KAUTH_ARG(n), NULL, NULL)) {
313 return EACCES;
314 }
315
316 sched_nice(chgp, n);
317 return 0;
318 }
319
320 int
321 sys_setrlimit(struct lwp *l, const struct sys_setrlimit_args *uap,
322 register_t *retval)
323 {
324 /* {
325 syscallarg(int) which;
326 syscallarg(const struct rlimit *) rlp;
327 } */
328 int error, which = SCARG(uap, which);
329 struct rlimit alim;
330
331 error = copyin(SCARG(uap, rlp), &alim, sizeof(struct rlimit));
332 if (error) {
333 return error;
334 }
335 return dosetrlimit(l, l->l_proc, which, &alim);
336 }
337
338 int
339 dosetrlimit(struct lwp *l, struct proc *p, int which, struct rlimit *limp)
340 {
341 struct rlimit *alimp;
342 int error;
343
344 if ((u_int)which >= RLIM_NLIMITS)
345 return EINVAL;
346
347 if (limp->rlim_cur > limp->rlim_max) {
348 /*
349 * This is programming error. According to SUSv2, we should
350 * return error in this case.
351 */
352 return EINVAL;
353 }
354
355 alimp = &p->p_rlimit[which];
356 /* if we don't change the value, no need to limcopy() */
357 if (limp->rlim_cur == alimp->rlim_cur &&
358 limp->rlim_max == alimp->rlim_max)
359 return 0;
360
361 error = kauth_authorize_process(l->l_cred, KAUTH_PROCESS_RLIMIT,
362 p, KAUTH_ARG(KAUTH_REQ_PROCESS_RLIMIT_SET), limp, KAUTH_ARG(which));
363 if (error)
364 return error;
365
366 lim_privatise(p);
367 /* p->p_limit is now unchangeable */
368 alimp = &p->p_rlimit[which];
369
370 switch (which) {
371
372 case RLIMIT_DATA:
373 if (limp->rlim_cur > maxdmap)
374 limp->rlim_cur = maxdmap;
375 if (limp->rlim_max > maxdmap)
376 limp->rlim_max = maxdmap;
377 break;
378
379 case RLIMIT_STACK:
380 if (limp->rlim_cur > maxsmap)
381 limp->rlim_cur = maxsmap;
382 if (limp->rlim_max > maxsmap)
383 limp->rlim_max = maxsmap;
384
385 /*
386 * Return EINVAL if the new stack size limit is lower than
387 * current usage. Otherwise, the process would get SIGSEGV the
388 * moment it would try to access anything on its current stack.
389 * This conforms to SUSv2.
390 */
391 if (btoc(limp->rlim_cur) < p->p_vmspace->vm_ssize ||
392 btoc(limp->rlim_max) < p->p_vmspace->vm_ssize) {
393 return EINVAL;
394 }
395
396 /*
397 * Stack is allocated to the max at exec time with
398 * only "rlim_cur" bytes accessible (In other words,
399 * allocates stack dividing two contiguous regions at
400 * "rlim_cur" bytes boundary).
401 *
402 * Since allocation is done in terms of page, roundup
403 * "rlim_cur" (otherwise, contiguous regions
404 * overlap). If stack limit is going up make more
405 * accessible, if going down make inaccessible.
406 */
407 limp->rlim_max = round_page(limp->rlim_max);
408 limp->rlim_cur = round_page(limp->rlim_cur);
409 if (limp->rlim_cur != alimp->rlim_cur) {
410 vaddr_t addr;
411 vsize_t size;
412 vm_prot_t prot;
413 char *base, *tmp;
414
415 base = p->p_vmspace->vm_minsaddr;
416 if (limp->rlim_cur > alimp->rlim_cur) {
417 prot = VM_PROT_READ | VM_PROT_WRITE;
418 size = limp->rlim_cur - alimp->rlim_cur;
419 tmp = STACK_GROW(base, alimp->rlim_cur);
420 } else {
421 prot = VM_PROT_NONE;
422 size = alimp->rlim_cur - limp->rlim_cur;
423 tmp = STACK_GROW(base, limp->rlim_cur);
424 }
425 addr = (vaddr_t)STACK_ALLOC(tmp, size);
426 (void) uvm_map_protect(&p->p_vmspace->vm_map,
427 addr, addr + size, prot, false);
428 }
429 break;
430
431 case RLIMIT_NOFILE:
432 if (limp->rlim_cur > maxfiles)
433 limp->rlim_cur = maxfiles;
434 if (limp->rlim_max > maxfiles)
435 limp->rlim_max = maxfiles;
436 break;
437
438 case RLIMIT_NPROC:
439 if (limp->rlim_cur > maxproc)
440 limp->rlim_cur = maxproc;
441 if (limp->rlim_max > maxproc)
442 limp->rlim_max = maxproc;
443 break;
444
445 case RLIMIT_NTHR:
446 if (limp->rlim_cur > maxlwp)
447 limp->rlim_cur = maxlwp;
448 if (limp->rlim_max > maxlwp)
449 limp->rlim_max = maxlwp;
450 break;
451 }
452
453 mutex_enter(&p->p_limit->pl_lock);
454 *alimp = *limp;
455 mutex_exit(&p->p_limit->pl_lock);
456 return 0;
457 }
458
459 int
460 sys_getrlimit(struct lwp *l, const struct sys_getrlimit_args *uap,
461 register_t *retval)
462 {
463 /* {
464 syscallarg(int) which;
465 syscallarg(struct rlimit *) rlp;
466 } */
467 struct proc *p = l->l_proc;
468 int which = SCARG(uap, which);
469 struct rlimit rl;
470
471 if ((u_int)which >= RLIM_NLIMITS)
472 return EINVAL;
473
474 mutex_enter(p->p_lock);
475 memcpy(&rl, &p->p_rlimit[which], sizeof(rl));
476 mutex_exit(p->p_lock);
477
478 return copyout(&rl, SCARG(uap, rlp), sizeof(rl));
479 }
480
481 /*
482 * Transform the running time and tick information in proc p into user,
483 * system, and interrupt time usage.
484 *
485 * Should be called with p->p_lock held unless called from exit1().
486 */
487 void
488 calcru(struct proc *p, struct timeval *up, struct timeval *sp,
489 struct timeval *ip, struct timeval *rp)
490 {
491 uint64_t u, st, ut, it, tot, dt;
492 struct lwp *l;
493 struct bintime tm;
494 struct timeval tv;
495
496 KASSERT(p->p_stat == SDEAD || mutex_owned(p->p_lock));
497
498 mutex_spin_enter(&p->p_stmutex);
499 st = p->p_sticks;
500 ut = p->p_uticks;
501 it = p->p_iticks;
502 mutex_spin_exit(&p->p_stmutex);
503
504 tm = p->p_rtime;
505
506 LIST_FOREACH(l, &p->p_lwps, l_sibling) {
507 lwp_lock(l);
508 bintime_add(&tm, &l->l_rtime);
509 if ((l->l_pflag & LP_RUNNING) != 0 &&
510 (l->l_pflag & (LP_INTR | LP_TIMEINTR)) != LP_INTR) {
511 struct bintime diff;
512 /*
513 * Adjust for the current time slice. This is
514 * actually fairly important since the error
515 * here is on the order of a time quantum,
516 * which is much greater than the sampling
517 * error.
518 */
519 binuptime(&diff);
520 membar_consumer(); /* for softint_dispatch() */
521 bintime_sub(&diff, &l->l_stime);
522 bintime_add(&tm, &diff);
523 }
524 lwp_unlock(l);
525 }
526
527 tot = st + ut + it;
528 bintime2timeval(&tm, &tv);
529 u = (uint64_t)tv.tv_sec * 1000000ul + tv.tv_usec;
530
531 if (tot == 0) {
532 /* No ticks, so can't use to share time out, split 50-50 */
533 st = ut = u / 2;
534 } else {
535 st = (u * st) / tot;
536 ut = (u * ut) / tot;
537 }
538
539 /*
540 * Try to avoid lying to the users (too much)
541 *
542 * Of course, user/sys time are based on sampling (ie: statistics)
543 * so that would be impossible, but convincing the mark
544 * that we have used less ?time this call than we had
545 * last time, is beyond reasonable... (the con fails!)
546 *
547 * Note that since actual used time cannot decrease, either
548 * utime or stime (or both) must be greater now than last time
549 * (or both the same) - if one seems to have decreased, hold
550 * it constant and steal the necessary bump from the other
551 * which must have increased.
552 */
553 if (p->p_xutime > ut) {
554 dt = p->p_xutime - ut;
555 st -= uimin(dt, st);
556 ut = p->p_xutime;
557 } else if (p->p_xstime > st) {
558 dt = p->p_xstime - st;
559 ut -= uimin(dt, ut);
560 st = p->p_xstime;
561 }
562
563 if (sp != NULL) {
564 p->p_xstime = st;
565 sp->tv_sec = st / 1000000;
566 sp->tv_usec = st % 1000000;
567 }
568 if (up != NULL) {
569 p->p_xutime = ut;
570 up->tv_sec = ut / 1000000;
571 up->tv_usec = ut % 1000000;
572 }
573 if (ip != NULL) {
574 if (it != 0) /* it != 0 --> tot != 0 */
575 it = (u * it) / tot;
576 ip->tv_sec = it / 1000000;
577 ip->tv_usec = it % 1000000;
578 }
579 if (rp != NULL) {
580 *rp = tv;
581 }
582 }
583
584 int
585 sys___getrusage50(struct lwp *l, const struct sys___getrusage50_args *uap,
586 register_t *retval)
587 {
588 /* {
589 syscallarg(int) who;
590 syscallarg(struct rusage *) rusage;
591 } */
592 int error;
593 struct rusage ru;
594 struct proc *p = l->l_proc;
595
596 error = getrusage1(p, SCARG(uap, who), &ru);
597 if (error != 0)
598 return error;
599
600 return copyout(&ru, SCARG(uap, rusage), sizeof(ru));
601 }
602
603 int
604 getrusage1(struct proc *p, int who, struct rusage *ru)
605 {
606
607 switch (who) {
608 case RUSAGE_SELF:
609 mutex_enter(p->p_lock);
610 ruspace(p);
611 memcpy(ru, &p->p_stats->p_ru, sizeof(*ru));
612 calcru(p, &ru->ru_utime, &ru->ru_stime, NULL, NULL);
613 rulwps(p, ru);
614 mutex_exit(p->p_lock);
615 break;
616 case RUSAGE_CHILDREN:
617 mutex_enter(p->p_lock);
618 memcpy(ru, &p->p_stats->p_cru, sizeof(*ru));
619 mutex_exit(p->p_lock);
620 break;
621 default:
622 return EINVAL;
623 }
624
625 return 0;
626 }
627
628 void
629 ruspace(struct proc *p)
630 {
631 struct vmspace *vm = p->p_vmspace;
632 struct rusage *ru = &p->p_stats->p_ru;
633
634 ru->ru_ixrss = vm->vm_tsize << (PAGE_SHIFT - 10);
635 ru->ru_idrss = vm->vm_dsize << (PAGE_SHIFT - 10);
636 ru->ru_isrss = vm->vm_ssize << (PAGE_SHIFT - 10);
637 #ifdef __HAVE_NO_PMAP_STATS
638 /* We don't keep track of the max so we get the current */
639 ru->ru_maxrss = vm_resident_count(vm) << (PAGE_SHIFT - 10);
640 #else
641 ru->ru_maxrss = vm->vm_rssmax << (PAGE_SHIFT - 10);
642 #endif
643 }
644
645 void
646 ruadd(struct rusage *ru, struct rusage *ru2)
647 {
648 long *ip, *ip2;
649 int i;
650
651 timeradd(&ru->ru_utime, &ru2->ru_utime, &ru->ru_utime);
652 timeradd(&ru->ru_stime, &ru2->ru_stime, &ru->ru_stime);
653 if (ru->ru_maxrss < ru2->ru_maxrss)
654 ru->ru_maxrss = ru2->ru_maxrss;
655 ip = &ru->ru_first; ip2 = &ru2->ru_first;
656 for (i = &ru->ru_last - &ru->ru_first; i >= 0; i--)
657 *ip++ += *ip2++;
658 }
659
660 void
661 rulwps(proc_t *p, struct rusage *ru)
662 {
663 lwp_t *l;
664
665 KASSERT(mutex_owned(p->p_lock));
666
667 LIST_FOREACH(l, &p->p_lwps, l_sibling) {
668 ruadd(ru, &l->l_ru);
669 ru->ru_nvcsw += (l->l_ncsw - l->l_nivcsw);
670 ru->ru_nivcsw += l->l_nivcsw;
671 }
672 }
673
674 /*
675 * lim_copy: make a copy of the plimit structure.
676 *
677 * We use copy-on-write after fork, and copy when a limit is changed.
678 */
679 struct plimit *
680 lim_copy(struct plimit *lim)
681 {
682 struct plimit *newlim;
683 char *corename;
684 size_t alen, len;
685
686 newlim = pool_cache_get(plimit_cache, PR_WAITOK);
687 mutex_init(&newlim->pl_lock, MUTEX_DEFAULT, IPL_NONE);
688 newlim->pl_writeable = false;
689 newlim->pl_refcnt = 1;
690 newlim->pl_sv_limit = NULL;
691
692 mutex_enter(&lim->pl_lock);
693 memcpy(newlim->pl_rlimit, lim->pl_rlimit,
694 sizeof(struct rlimit) * RLIM_NLIMITS);
695
696 /*
697 * Note: the common case is a use of default core name.
698 */
699 alen = 0;
700 corename = NULL;
701 for (;;) {
702 if (lim->pl_corename == defcorename) {
703 newlim->pl_corename = defcorename;
704 newlim->pl_cnlen = 0;
705 break;
706 }
707 len = lim->pl_cnlen;
708 if (len == alen) {
709 newlim->pl_corename = corename;
710 newlim->pl_cnlen = len;
711 memcpy(corename, lim->pl_corename, len);
712 corename = NULL;
713 break;
714 }
715 mutex_exit(&lim->pl_lock);
716 if (corename) {
717 kmem_free(corename, alen);
718 }
719 alen = len;
720 corename = kmem_alloc(alen, KM_SLEEP);
721 mutex_enter(&lim->pl_lock);
722 }
723 mutex_exit(&lim->pl_lock);
724
725 if (corename) {
726 kmem_free(corename, alen);
727 }
728 return newlim;
729 }
730
731 void
732 lim_addref(struct plimit *lim)
733 {
734 atomic_inc_uint(&lim->pl_refcnt);
735 }
736
737 /*
738 * lim_privatise: give a process its own private plimit structure.
739 */
740 void
741 lim_privatise(proc_t *p)
742 {
743 struct plimit *lim = p->p_limit, *newlim;
744
745 if (lim->pl_writeable) {
746 return;
747 }
748
749 newlim = lim_copy(lim);
750
751 mutex_enter(p->p_lock);
752 if (p->p_limit->pl_writeable) {
753 /* Other thread won the race. */
754 mutex_exit(p->p_lock);
755 lim_free(newlim);
756 return;
757 }
758
759 /*
760 * Since p->p_limit can be accessed without locked held,
761 * old limit structure must not be deleted yet.
762 */
763 newlim->pl_sv_limit = p->p_limit;
764 newlim->pl_writeable = true;
765 p->p_limit = newlim;
766 mutex_exit(p->p_lock);
767 }
768
769 void
770 lim_setcorename(proc_t *p, char *name, size_t len)
771 {
772 struct plimit *lim;
773 char *oname;
774 size_t olen;
775
776 lim_privatise(p);
777 lim = p->p_limit;
778
779 mutex_enter(&lim->pl_lock);
780 oname = lim->pl_corename;
781 olen = lim->pl_cnlen;
782 lim->pl_corename = name;
783 lim->pl_cnlen = len;
784 mutex_exit(&lim->pl_lock);
785
786 if (oname != defcorename) {
787 kmem_free(oname, olen);
788 }
789 }
790
791 void
792 lim_free(struct plimit *lim)
793 {
794 struct plimit *sv_lim;
795
796 do {
797 membar_release();
798 if (atomic_dec_uint_nv(&lim->pl_refcnt) > 0) {
799 return;
800 }
801 membar_acquire();
802 if (lim->pl_corename != defcorename) {
803 kmem_free(lim->pl_corename, lim->pl_cnlen);
804 }
805 sv_lim = lim->pl_sv_limit;
806 mutex_destroy(&lim->pl_lock);
807 pool_cache_put(plimit_cache, lim);
808 } while ((lim = sv_lim) != NULL);
809 }
810
811 struct pstats *
812 pstatscopy(struct pstats *ps)
813 {
814 struct pstats *nps;
815 size_t len;
816
817 nps = pool_cache_get(pstats_cache, PR_WAITOK);
818
819 len = (char *)&nps->pstat_endzero - (char *)&nps->pstat_startzero;
820 memset(&nps->pstat_startzero, 0, len);
821
822 len = (char *)&nps->pstat_endcopy - (char *)&nps->pstat_startcopy;
823 memcpy(&nps->pstat_startcopy, &ps->pstat_startcopy, len);
824
825 return nps;
826 }
827
828 void
829 pstatsfree(struct pstats *ps)
830 {
831
832 pool_cache_put(pstats_cache, ps);
833 }
834
835 /*
836 * sysctl_proc_findproc: a routine for sysctl proc subtree helpers that
837 * need to pick a valid process by PID.
838 *
839 * => Hold a reference on the process, on success.
840 */
841 static int
842 sysctl_proc_findproc(lwp_t *l, pid_t pid, proc_t **p2)
843 {
844 proc_t *p;
845 int error;
846
847 if (pid == PROC_CURPROC) {
848 p = l->l_proc;
849 } else {
850 mutex_enter(&proc_lock);
851 p = proc_find(pid);
852 if (p == NULL) {
853 mutex_exit(&proc_lock);
854 return ESRCH;
855 }
856 }
857 error = rw_tryenter(&p->p_reflock, RW_READER) ? 0 : EBUSY;
858 if (pid != PROC_CURPROC) {
859 mutex_exit(&proc_lock);
860 }
861 *p2 = p;
862 return error;
863 }
864
865 /*
866 * sysctl_proc_paxflags: helper routine to get process's paxctl flags
867 */
868 static int
869 sysctl_proc_paxflags(SYSCTLFN_ARGS)
870 {
871 struct proc *p;
872 struct sysctlnode node;
873 int paxflags;
874 int error;
875
876 /* First, validate the request. */
877 if (namelen != 0 || name[-1] != PROC_PID_PAXFLAGS)
878 return EINVAL;
879
880 /* Find the process. Hold a reference (p_reflock), if found. */
881 error = sysctl_proc_findproc(l, (pid_t)name[-2], &p);
882 if (error)
883 return error;
884
885 /* XXX-elad */
886 error = kauth_authorize_process(l->l_cred, KAUTH_PROCESS_CANSEE, p,
887 KAUTH_ARG(KAUTH_REQ_PROCESS_CANSEE_ENTRY), NULL, NULL);
888 if (error) {
889 rw_exit(&p->p_reflock);
890 return error;
891 }
892
893 /* Retrieve the limits. */
894 node = *rnode;
895 paxflags = p->p_pax;
896 node.sysctl_data = &paxflags;
897
898 error = sysctl_lookup(SYSCTLFN_CALL(&node));
899
900 /* If attempting to write new value, it's an error */
901 if (error == 0 && newp != NULL)
902 error = EACCES;
903
904 rw_exit(&p->p_reflock);
905 return error;
906 }
907
908 /*
909 * sysctl_proc_corename: helper routine to get or set the core file name
910 * for a process specified by PID.
911 */
912 static int
913 sysctl_proc_corename(SYSCTLFN_ARGS)
914 {
915 struct proc *p;
916 struct plimit *lim;
917 char *cnbuf, *cname;
918 struct sysctlnode node;
919 size_t len;
920 int error;
921
922 /* First, validate the request. */
923 if (namelen != 0 || name[-1] != PROC_PID_CORENAME)
924 return EINVAL;
925
926 /* Find the process. Hold a reference (p_reflock), if found. */
927 error = sysctl_proc_findproc(l, (pid_t)name[-2], &p);
928 if (error)
929 return error;
930
931 /* XXX-elad */
932 error = kauth_authorize_process(l->l_cred, KAUTH_PROCESS_CANSEE, p,
933 KAUTH_ARG(KAUTH_REQ_PROCESS_CANSEE_ENTRY), NULL, NULL);
934 if (error) {
935 rw_exit(&p->p_reflock);
936 return error;
937 }
938
939 cnbuf = PNBUF_GET();
940
941 if (oldp) {
942 /* Get case: copy the core name into the buffer. */
943 error = kauth_authorize_process(l->l_cred,
944 KAUTH_PROCESS_CORENAME, p,
945 KAUTH_ARG(KAUTH_REQ_PROCESS_CORENAME_GET), NULL, NULL);
946 if (error) {
947 goto done;
948 }
949 lim = p->p_limit;
950 mutex_enter(&lim->pl_lock);
951 strlcpy(cnbuf, lim->pl_corename, MAXPATHLEN);
952 mutex_exit(&lim->pl_lock);
953 }
954
955 node = *rnode;
956 node.sysctl_data = cnbuf;
957 error = sysctl_lookup(SYSCTLFN_CALL(&node));
958
959 /* Return if error, or if caller is only getting the core name. */
960 if (error || newp == NULL) {
961 goto done;
962 }
963
964 /*
965 * Set case. Check permission and then validate new core name.
966 * It must be either "core", "/core", or end in ".core".
967 */
968 error = kauth_authorize_process(l->l_cred, KAUTH_PROCESS_CORENAME,
969 p, KAUTH_ARG(KAUTH_REQ_PROCESS_CORENAME_SET), cnbuf, NULL);
970 if (error) {
971 goto done;
972 }
973 len = strlen(cnbuf);
974 if ((len < 4 || strcmp(cnbuf + len - 4, "core") != 0) ||
975 (len > 4 && cnbuf[len - 5] != '/' && cnbuf[len - 5] != '.')) {
976 error = EINVAL;
977 goto done;
978 }
979
980 /* Allocate, copy and set the new core name for plimit structure. */
981 cname = kmem_alloc(++len, KM_NOSLEEP);
982 if (cname == NULL) {
983 error = ENOMEM;
984 goto done;
985 }
986 memcpy(cname, cnbuf, len);
987 lim_setcorename(p, cname, len);
988 done:
989 rw_exit(&p->p_reflock);
990 PNBUF_PUT(cnbuf);
991 return error;
992 }
993
994 /*
995 * sysctl_proc_stop: helper routine for checking/setting the stop flags.
996 */
997 static int
998 sysctl_proc_stop(SYSCTLFN_ARGS)
999 {
1000 struct proc *p;
1001 int isset, flag, error = 0;
1002 struct sysctlnode node;
1003
1004 if (namelen != 0)
1005 return EINVAL;
1006
1007 /* Find the process. Hold a reference (p_reflock), if found. */
1008 error = sysctl_proc_findproc(l, (pid_t)name[-2], &p);
1009 if (error)
1010 return error;
1011
1012 /* XXX-elad */
1013 error = kauth_authorize_process(l->l_cred, KAUTH_PROCESS_CANSEE, p,
1014 KAUTH_ARG(KAUTH_REQ_PROCESS_CANSEE_ENTRY), NULL, NULL);
1015 if (error) {
1016 goto out;
1017 }
1018
1019 /* Determine the flag. */
1020 switch (rnode->sysctl_num) {
1021 case PROC_PID_STOPFORK:
1022 flag = PS_STOPFORK;
1023 break;
1024 case PROC_PID_STOPEXEC:
1025 flag = PS_STOPEXEC;
1026 break;
1027 case PROC_PID_STOPEXIT:
1028 flag = PS_STOPEXIT;
1029 break;
1030 default:
1031 error = EINVAL;
1032 goto out;
1033 }
1034 isset = (p->p_flag & flag) ? 1 : 0;
1035 node = *rnode;
1036 node.sysctl_data = &isset;
1037 error = sysctl_lookup(SYSCTLFN_CALL(&node));
1038
1039 /* Return if error, or if callers is only getting the flag. */
1040 if (error || newp == NULL) {
1041 goto out;
1042 }
1043
1044 /* Check if caller can set the flags. */
1045 error = kauth_authorize_process(l->l_cred, KAUTH_PROCESS_STOPFLAG,
1046 p, KAUTH_ARG(flag), NULL, NULL);
1047 if (error) {
1048 goto out;
1049 }
1050 mutex_enter(p->p_lock);
1051 if (isset) {
1052 p->p_sflag |= flag;
1053 } else {
1054 p->p_sflag &= ~flag;
1055 }
1056 mutex_exit(p->p_lock);
1057 out:
1058 rw_exit(&p->p_reflock);
1059 return error;
1060 }
1061
1062 /*
1063 * sysctl_proc_plimit: helper routine to get/set rlimits of a process.
1064 */
1065 static int
1066 sysctl_proc_plimit(SYSCTLFN_ARGS)
1067 {
1068 struct proc *p;
1069 u_int limitno;
1070 int which, error = 0;
1071 struct rlimit alim;
1072 struct sysctlnode node;
1073
1074 if (namelen != 0)
1075 return EINVAL;
1076
1077 which = name[-1];
1078 if (which != PROC_PID_LIMIT_TYPE_SOFT &&
1079 which != PROC_PID_LIMIT_TYPE_HARD)
1080 return EINVAL;
1081
1082 limitno = name[-2] - 1;
1083 if (limitno >= RLIM_NLIMITS)
1084 return EINVAL;
1085
1086 if (name[-3] != PROC_PID_LIMIT)
1087 return EINVAL;
1088
1089 /* Find the process. Hold a reference (p_reflock), if found. */
1090 error = sysctl_proc_findproc(l, (pid_t)name[-4], &p);
1091 if (error)
1092 return error;
1093
1094 /* XXX-elad */
1095 error = kauth_authorize_process(l->l_cred, KAUTH_PROCESS_CANSEE, p,
1096 KAUTH_ARG(KAUTH_REQ_PROCESS_CANSEE_ENTRY), NULL, NULL);
1097 if (error)
1098 goto out;
1099
1100 /* Check if caller can retrieve the limits. */
1101 if (newp == NULL) {
1102 error = kauth_authorize_process(l->l_cred, KAUTH_PROCESS_RLIMIT,
1103 p, KAUTH_ARG(KAUTH_REQ_PROCESS_RLIMIT_GET), &alim,
1104 KAUTH_ARG(which));
1105 if (error)
1106 goto out;
1107 }
1108
1109 /* Retrieve the limits. */
1110 node = *rnode;
1111 memcpy(&alim, &p->p_rlimit[limitno], sizeof(alim));
1112 if (which == PROC_PID_LIMIT_TYPE_HARD) {
1113 node.sysctl_data = &alim.rlim_max;
1114 } else {
1115 node.sysctl_data = &alim.rlim_cur;
1116 }
1117 error = sysctl_lookup(SYSCTLFN_CALL(&node));
1118
1119 /* Return if error, or if we are only retrieving the limits. */
1120 if (error || newp == NULL) {
1121 goto out;
1122 }
1123 error = dosetrlimit(l, p, limitno, &alim);
1124 out:
1125 rw_exit(&p->p_reflock);
1126 return error;
1127 }
1128
1129 /*
1130 * Setup sysctl nodes.
1131 */
1132 static void
1133 sysctl_proc_setup(void)
1134 {
1135
1136 sysctl_createv(&proc_sysctllog, 0, NULL, NULL,
1137 CTLFLAG_PERMANENT|CTLFLAG_ANYNUMBER,
1138 CTLTYPE_NODE, "curproc",
1139 SYSCTL_DESCR("Per-process settings"),
1140 NULL, 0, NULL, 0,
1141 CTL_PROC, PROC_CURPROC, CTL_EOL);
1142
1143 sysctl_createv(&proc_sysctllog, 0, NULL, NULL,
1144 CTLFLAG_PERMANENT|CTLFLAG_READONLY,
1145 CTLTYPE_INT, "paxflags",
1146 SYSCTL_DESCR("Process PAX control flags"),
1147 sysctl_proc_paxflags, 0, NULL, 0,
1148 CTL_PROC, PROC_CURPROC, PROC_PID_PAXFLAGS, CTL_EOL);
1149
1150 sysctl_createv(&proc_sysctllog, 0, NULL, NULL,
1151 CTLFLAG_PERMANENT|CTLFLAG_READWRITE|CTLFLAG_ANYWRITE,
1152 CTLTYPE_STRING, "corename",
1153 SYSCTL_DESCR("Core file name"),
1154 sysctl_proc_corename, 0, NULL, MAXPATHLEN,
1155 CTL_PROC, PROC_CURPROC, PROC_PID_CORENAME, CTL_EOL);
1156 sysctl_createv(&proc_sysctllog, 0, NULL, NULL,
1157 CTLFLAG_PERMANENT,
1158 CTLTYPE_NODE, "rlimit",
1159 SYSCTL_DESCR("Process limits"),
1160 NULL, 0, NULL, 0,
1161 CTL_PROC, PROC_CURPROC, PROC_PID_LIMIT, CTL_EOL);
1162
1163 #define create_proc_plimit(s, n) do { \
1164 sysctl_createv(&proc_sysctllog, 0, NULL, NULL, \
1165 CTLFLAG_PERMANENT, \
1166 CTLTYPE_NODE, s, \
1167 SYSCTL_DESCR("Process " s " limits"), \
1168 NULL, 0, NULL, 0, \
1169 CTL_PROC, PROC_CURPROC, PROC_PID_LIMIT, n, \
1170 CTL_EOL); \
1171 sysctl_createv(&proc_sysctllog, 0, NULL, NULL, \
1172 CTLFLAG_PERMANENT|CTLFLAG_READWRITE|CTLFLAG_ANYWRITE, \
1173 CTLTYPE_QUAD, "soft", \
1174 SYSCTL_DESCR("Process soft " s " limit"), \
1175 sysctl_proc_plimit, 0, NULL, 0, \
1176 CTL_PROC, PROC_CURPROC, PROC_PID_LIMIT, n, \
1177 PROC_PID_LIMIT_TYPE_SOFT, CTL_EOL); \
1178 sysctl_createv(&proc_sysctllog, 0, NULL, NULL, \
1179 CTLFLAG_PERMANENT|CTLFLAG_READWRITE|CTLFLAG_ANYWRITE, \
1180 CTLTYPE_QUAD, "hard", \
1181 SYSCTL_DESCR("Process hard " s " limit"), \
1182 sysctl_proc_plimit, 0, NULL, 0, \
1183 CTL_PROC, PROC_CURPROC, PROC_PID_LIMIT, n, \
1184 PROC_PID_LIMIT_TYPE_HARD, CTL_EOL); \
1185 } while (0/*CONSTCOND*/)
1186
1187 create_proc_plimit("cputime", PROC_PID_LIMIT_CPU);
1188 create_proc_plimit("filesize", PROC_PID_LIMIT_FSIZE);
1189 create_proc_plimit("datasize", PROC_PID_LIMIT_DATA);
1190 create_proc_plimit("stacksize", PROC_PID_LIMIT_STACK);
1191 create_proc_plimit("coredumpsize", PROC_PID_LIMIT_CORE);
1192 create_proc_plimit("memoryuse", PROC_PID_LIMIT_RSS);
1193 create_proc_plimit("memorylocked", PROC_PID_LIMIT_MEMLOCK);
1194 create_proc_plimit("maxproc", PROC_PID_LIMIT_NPROC);
1195 create_proc_plimit("descriptors", PROC_PID_LIMIT_NOFILE);
1196 create_proc_plimit("sbsize", PROC_PID_LIMIT_SBSIZE);
1197 create_proc_plimit("vmemoryuse", PROC_PID_LIMIT_AS);
1198 create_proc_plimit("maxlwp", PROC_PID_LIMIT_NTHR);
1199
1200 #undef create_proc_plimit
1201
1202 sysctl_createv(&proc_sysctllog, 0, NULL, NULL,
1203 CTLFLAG_PERMANENT|CTLFLAG_READWRITE|CTLFLAG_ANYWRITE,
1204 CTLTYPE_INT, "stopfork",
1205 SYSCTL_DESCR("Stop process at fork(2)"),
1206 sysctl_proc_stop, 0, NULL, 0,
1207 CTL_PROC, PROC_CURPROC, PROC_PID_STOPFORK, CTL_EOL);
1208 sysctl_createv(&proc_sysctllog, 0, NULL, NULL,
1209 CTLFLAG_PERMANENT|CTLFLAG_READWRITE|CTLFLAG_ANYWRITE,
1210 CTLTYPE_INT, "stopexec",
1211 SYSCTL_DESCR("Stop process at execve(2)"),
1212 sysctl_proc_stop, 0, NULL, 0,
1213 CTL_PROC, PROC_CURPROC, PROC_PID_STOPEXEC, CTL_EOL);
1214 sysctl_createv(&proc_sysctllog, 0, NULL, NULL,
1215 CTLFLAG_PERMANENT|CTLFLAG_READWRITE|CTLFLAG_ANYWRITE,
1216 CTLTYPE_INT, "stopexit",
1217 SYSCTL_DESCR("Stop process before completing exit"),
1218 sysctl_proc_stop, 0, NULL, 0,
1219 CTL_PROC, PROC_CURPROC, PROC_PID_STOPEXIT, CTL_EOL);
1220 }
1221