Home | History | Annotate | Line # | Download | only in kern
subr_prf.c revision 1.120.2.4
      1 /*	$NetBSD: subr_prf.c,v 1.120.2.4 2009/07/18 14:53:23 yamt Exp $	*/
      2 
      3 /*-
      4  * Copyright (c) 1986, 1988, 1991, 1993
      5  *	The Regents of the University of California.  All rights reserved.
      6  * (c) UNIX System Laboratories, Inc.
      7  * All or some portions of this file are derived from material licensed
      8  * to the University of California by American Telephone and Telegraph
      9  * Co. or Unix System Laboratories, Inc. and are reproduced herein with
     10  * the permission of UNIX System Laboratories, Inc.
     11  *
     12  * Redistribution and use in source and binary forms, with or without
     13  * modification, are permitted provided that the following conditions
     14  * are met:
     15  * 1. Redistributions of source code must retain the above copyright
     16  *    notice, this list of conditions and the following disclaimer.
     17  * 2. Redistributions in binary form must reproduce the above copyright
     18  *    notice, this list of conditions and the following disclaimer in the
     19  *    documentation and/or other materials provided with the distribution.
     20  * 3. Neither the name of the University nor the names of its contributors
     21  *    may be used to endorse or promote products derived from this software
     22  *    without specific prior written permission.
     23  *
     24  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
     25  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     26  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     27  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
     28  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     29  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     30  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     31  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     32  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     33  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     34  * SUCH DAMAGE.
     35  *
     36  *	@(#)subr_prf.c	8.4 (Berkeley) 5/4/95
     37  */
     38 
     39 #include <sys/cdefs.h>
     40 __KERNEL_RCSID(0, "$NetBSD: subr_prf.c,v 1.120.2.4 2009/07/18 14:53:23 yamt Exp $");
     41 
     42 #include "opt_ddb.h"
     43 #include "opt_ipkdb.h"
     44 #include "opt_kgdb.h"
     45 #include "opt_dump.h"
     46 
     47 #include <sys/param.h>
     48 #include <sys/stdint.h>
     49 #include <sys/systm.h>
     50 #include <sys/buf.h>
     51 #include <sys/device.h>
     52 #include <sys/reboot.h>
     53 #include <sys/msgbuf.h>
     54 #include <sys/proc.h>
     55 #include <sys/ioctl.h>
     56 #include <sys/vnode.h>
     57 #include <sys/file.h>
     58 #include <sys/tty.h>
     59 #include <sys/tprintf.h>
     60 #include <sys/syslog.h>
     61 #include <sys/malloc.h>
     62 #include <sys/kprintf.h>
     63 #include <sys/atomic.h>
     64 #include <sys/kernel.h>
     65 #include <sys/cpu.h>
     66 
     67 #include <dev/cons.h>
     68 
     69 #include <net/if.h>
     70 
     71 #ifdef DDB
     72 #include <ddb/ddbvar.h>
     73 #include <machine/db_machdep.h>
     74 #include <ddb/db_command.h>
     75 #include <ddb/db_interface.h>
     76 #endif
     77 
     78 #ifdef IPKDB
     79 #include <ipkdb/ipkdb.h>
     80 #endif
     81 
     82 static kmutex_t kprintf_mtx;
     83 static bool kprintf_inited = false;
     84 
     85 /*
     86  * note that stdarg.h and the ansi style va_start macro is used for both
     87  * ansi and traditional c complers.
     88  * XXX: this requires that stdarg.h define: va_alist and va_dcl
     89  */
     90 #include <machine/stdarg.h>
     91 
     92 
     93 #ifdef KGDB
     94 #include <sys/kgdb.h>
     95 #endif
     96 #ifdef DDB
     97 #include <ddb/db_output.h>	/* db_printf, db_putchar prototypes */
     98 #endif
     99 
    100 
    101 /*
    102  * defines
    103  */
    104 
    105 
    106 /*
    107  * local prototypes
    108  */
    109 
    110 static void	 putchar(int, int, struct tty *);
    111 
    112 
    113 /*
    114  * globals
    115  */
    116 
    117 extern	struct tty *constty;	/* pointer to console "window" tty */
    118 extern	int log_open;	/* subr_log: is /dev/klog open? */
    119 const	char *panicstr; /* arg to first call to panic (used as a flag
    120 			   to indicate that panic has already been called). */
    121 struct cpu_info *paniccpu;	/* cpu that first paniced */
    122 long	panicstart, panicend;	/* position in the msgbuf of the start and
    123 				   end of the formatted panicstr. */
    124 int	doing_shutdown;	/* set to indicate shutdown in progress */
    125 
    126 #ifndef	DUMP_ON_PANIC
    127 #define	DUMP_ON_PANIC	1
    128 #endif
    129 int	dumponpanic = DUMP_ON_PANIC;
    130 
    131 /*
    132  * v_putc: routine to putc on virtual console
    133  *
    134  * the v_putc pointer can be used to redirect the console cnputc elsewhere
    135  * [e.g. to a "virtual console"].
    136  */
    137 
    138 void (*v_putc)(int) = cnputc;	/* start with cnputc (normal cons) */
    139 void (*v_flush)(void) = cnflush;	/* start with cnflush (normal cons) */
    140 
    141 const char hexdigits[] = "0123456789abcdef";
    142 const char HEXDIGITS[] = "0123456789ABCDEF";
    143 
    144 
    145 /*
    146  * functions
    147  */
    148 
    149 /*
    150  * Locking is inited fairly early in MI bootstrap.  Before that
    151  * prints are done unlocked.  But that doesn't really matter,
    152  * since nothing can preempt us before interrupts are enabled.
    153  */
    154 void
    155 kprintf_init(void)
    156 {
    157 
    158 	KASSERT(!kprintf_inited && cold); /* not foolproof, but ... */
    159 	mutex_init(&kprintf_mtx, MUTEX_DEFAULT, IPL_HIGH);
    160 	kprintf_inited = true;
    161 }
    162 
    163 void
    164 kprintf_lock(void)
    165 {
    166 
    167 	if (__predict_true(kprintf_inited))
    168 		mutex_enter(&kprintf_mtx);
    169 }
    170 
    171 void
    172 kprintf_unlock(void)
    173 {
    174 
    175 	if (__predict_true(kprintf_inited)) {
    176 		/* assert kprintf wasn't somehow inited while we were in */
    177 		KASSERT(mutex_owned(&kprintf_mtx));
    178 		mutex_exit(&kprintf_mtx);
    179 	}
    180 }
    181 
    182 /*
    183  * twiddle: spin a little propellor on the console.
    184  */
    185 
    186 void
    187 twiddle(void)
    188 {
    189 	static const char twiddle_chars[] = "|/-\\";
    190 	static int pos;
    191 
    192 	kprintf_lock();
    193 
    194 	putchar(twiddle_chars[pos++ & 3], TOCONS, NULL);
    195 	putchar('\b', TOCONS, NULL);
    196 
    197 	kprintf_unlock();
    198 }
    199 
    200 /*
    201  * panic: handle an unresolvable fatal error
    202  *
    203  * prints "panic: <message>" and reboots.   if called twice (i.e. recursive
    204  * call) we avoid trying to sync the disk and just reboot (to avoid
    205  * recursive panics).
    206  */
    207 
    208 void
    209 panic(const char *fmt, ...)
    210 {
    211 	CPU_INFO_ITERATOR cii;
    212 	struct cpu_info *ci, *oci;
    213 	int bootopt;
    214 	va_list ap;
    215 
    216 	if (lwp0.l_cpu && curlwp) {
    217 		/*
    218 		 * Disable preemption.  If already panicing on another CPU, sit
    219 		 * here and spin until the system is rebooted.  Allow the CPU that
    220 		 * first paniced to panic again.
    221 		 */
    222 		kpreempt_disable();
    223 		ci = curcpu();
    224 		oci = atomic_cas_ptr((void *)&paniccpu, NULL, ci);
    225 		if (oci != NULL && oci != ci) {
    226 			/* Give interrupts a chance to try and prevent deadlock. */
    227 			for (;;) {
    228 #ifndef _RUMPKERNEL /* XXXpooka: temporary build fix, see kern/40505 */
    229 				DELAY(10);
    230 #endif /* _RUMPKERNEL */
    231 			}
    232 		}
    233 
    234 		/*
    235 		 * Convert the current thread to a bound thread and prevent all
    236 		 * CPUs from scheduling unbound jobs.  Do so without taking any
    237 		 * locks.
    238 		 */
    239 		curlwp->l_pflag |= LP_BOUND;
    240 		for (CPU_INFO_FOREACH(cii, ci)) {
    241 			ci->ci_schedstate.spc_flags |= SPCF_OFFLINE;
    242 		}
    243 	}
    244 
    245 	bootopt = RB_AUTOBOOT | RB_NOSYNC;
    246 	if (dumponpanic)
    247 		bootopt |= RB_DUMP;
    248 	if (!panicstr)
    249 		panicstr = fmt;
    250 	doing_shutdown = 1;
    251 
    252 	if (msgbufenabled && msgbufp->msg_magic == MSG_MAGIC)
    253 		panicstart = msgbufp->msg_bufx;
    254 
    255 	va_start(ap, fmt);
    256 	printf("panic: ");
    257 	vprintf(fmt, ap);
    258 	printf("\n");
    259 	va_end(ap);
    260 
    261 	if (msgbufenabled && msgbufp->msg_magic == MSG_MAGIC)
    262 		panicend = msgbufp->msg_bufx;
    263 
    264 #ifdef IPKDB
    265 	ipkdb_panic();
    266 #endif
    267 #ifdef KGDB
    268 	kgdb_panic();
    269 #endif
    270 #ifdef KADB
    271 	if (boothowto & RB_KDB)
    272 		kdbpanic();
    273 #endif
    274 #ifdef DDB
    275 	if (db_onpanic == 1)
    276 		Debugger();
    277 	else if (db_onpanic >= 0) {
    278 		static int intrace = 0;
    279 
    280 		if (intrace == 0) {
    281 			intrace = 1;
    282 			printf("cpu%u: Begin traceback...\n",
    283 			    cpu_index(curcpu()));
    284 			db_stack_trace_print(
    285 			    (db_expr_t)(intptr_t)__builtin_frame_address(0),
    286 			    true, 65535, "", printf);
    287 			printf("cpu%u: End traceback...\n",
    288 			    cpu_index(curcpu()));
    289 			intrace = 0;
    290 		} else
    291 			printf("Faulted in mid-traceback; aborting...");
    292 		if (db_onpanic == 2)
    293 			Debugger();
    294 	}
    295 #endif
    296 	cpu_reboot(bootopt, NULL);
    297 }
    298 
    299 /*
    300  * kernel logging functions: log, logpri, addlog
    301  */
    302 
    303 /*
    304  * log: write to the log buffer
    305  *
    306  * => will not sleep [so safe to call from interrupt]
    307  * => will log to console if /dev/klog isn't open
    308  */
    309 
    310 void
    311 log(int level, const char *fmt, ...)
    312 {
    313 	va_list ap;
    314 
    315 	kprintf_lock();
    316 
    317 	klogpri(level);		/* log the level first */
    318 	va_start(ap, fmt);
    319 	kprintf(fmt, TOLOG, NULL, NULL, ap);
    320 	va_end(ap);
    321 	if (!log_open) {
    322 		va_start(ap, fmt);
    323 		kprintf(fmt, TOCONS, NULL, NULL, ap);
    324 		va_end(ap);
    325 	}
    326 
    327 	kprintf_unlock();
    328 
    329 	logwakeup();		/* wake up anyone waiting for log msgs */
    330 }
    331 
    332 /*
    333  * vlog: write to the log buffer [already have va_alist]
    334  */
    335 
    336 void
    337 vlog(int level, const char *fmt, va_list ap)
    338 {
    339 
    340 	kprintf_lock();
    341 
    342 	klogpri(level);		/* log the level first */
    343 	kprintf(fmt, TOLOG, NULL, NULL, ap);
    344 	if (!log_open)
    345 		kprintf(fmt, TOCONS, NULL, NULL, ap);
    346 
    347 	kprintf_unlock();
    348 
    349 	logwakeup();		/* wake up anyone waiting for log msgs */
    350 }
    351 
    352 /*
    353  * logpri: log the priority level to the klog
    354  */
    355 
    356 void
    357 logpri(int level)
    358 {
    359 
    360 	kprintf_lock();
    361 	klogpri(level);
    362 	kprintf_unlock();
    363 }
    364 
    365 /*
    366  * Note: we must be in the mutex here!
    367  */
    368 void
    369 klogpri(int level)
    370 {
    371 	char *p;
    372 	char snbuf[KPRINTF_BUFSIZE];
    373 
    374 	putchar('<', TOLOG, NULL);
    375 	snprintf(snbuf, sizeof(snbuf), "%d", level);
    376 	for (p = snbuf ; *p ; p++)
    377 		putchar(*p, TOLOG, NULL);
    378 	putchar('>', TOLOG, NULL);
    379 }
    380 
    381 /*
    382  * addlog: add info to previous log message
    383  */
    384 
    385 void
    386 addlog(const char *fmt, ...)
    387 {
    388 	va_list ap;
    389 
    390 	kprintf_lock();
    391 
    392 	va_start(ap, fmt);
    393 	kprintf(fmt, TOLOG, NULL, NULL, ap);
    394 	va_end(ap);
    395 	if (!log_open) {
    396 		va_start(ap, fmt);
    397 		kprintf(fmt, TOCONS, NULL, NULL, ap);
    398 		va_end(ap);
    399 	}
    400 
    401 	kprintf_unlock();
    402 
    403 	logwakeup();
    404 }
    405 
    406 
    407 /*
    408  * putchar: print a single character on console or user terminal.
    409  *
    410  * => if console, then the last MSGBUFS chars are saved in msgbuf
    411  *	for inspection later (e.g. dmesg/syslog)
    412  * => we must already be in the mutex!
    413  */
    414 static void
    415 putchar(int c, int flags, struct tty *tp)
    416 {
    417 
    418 	if (panicstr)
    419 		constty = NULL;
    420 	if ((flags & TOCONS) && tp == NULL && constty) {
    421 		tp = constty;
    422 		flags |= TOTTY;
    423 	}
    424 	if ((flags & TOTTY) && tp &&
    425 	    tputchar(c, flags, tp) < 0 &&
    426 	    (flags & TOCONS) && tp == constty)
    427 		constty = NULL;
    428 	if ((flags & TOLOG) &&
    429 	    c != '\0' && c != '\r' && c != 0177)
    430 	    	logputchar(c);
    431 	if ((flags & TOCONS) && constty == NULL && c != '\0')
    432 		(*v_putc)(c);
    433 #ifdef DDB
    434 	if (flags & TODDB)
    435 		db_putchar(c);
    436 #endif
    437 }
    438 
    439 /*
    440  * tablefull: warn that a system table is full
    441  */
    442 
    443 void
    444 tablefull(const char *tab, const char *hint)
    445 {
    446 	if (hint)
    447 		log(LOG_ERR, "%s: table is full - %s\n", tab, hint);
    448 	else
    449 		log(LOG_ERR, "%s: table is full\n", tab);
    450 }
    451 
    452 
    453 /*
    454  * uprintf: print to the controlling tty of the current process
    455  *
    456  * => we may block if the tty queue is full
    457  * => no message is printed if the queue doesn't clear in a reasonable
    458  *	time
    459  */
    460 
    461 void
    462 uprintf(const char *fmt, ...)
    463 {
    464 	struct proc *p = curproc;
    465 	va_list ap;
    466 
    467 	/* mutex_enter(proc_lock); XXXSMP */
    468 
    469 	if (p->p_lflag & PL_CONTROLT && p->p_session->s_ttyvp) {
    470 		/* No mutex needed; going to process TTY. */
    471 		va_start(ap, fmt);
    472 		kprintf(fmt, TOTTY, p->p_session->s_ttyp, NULL, ap);
    473 		va_end(ap);
    474 	}
    475 
    476 	/* mutex_exit(proc_lock); XXXSMP */
    477 }
    478 
    479 void
    480 uprintf_locked(const char *fmt, ...)
    481 {
    482 	struct proc *p = curproc;
    483 	va_list ap;
    484 
    485 	if (p->p_lflag & PL_CONTROLT && p->p_session->s_ttyvp) {
    486 		/* No mutex needed; going to process TTY. */
    487 		va_start(ap, fmt);
    488 		kprintf(fmt, TOTTY, p->p_session->s_ttyp, NULL, ap);
    489 		va_end(ap);
    490 	}
    491 }
    492 
    493 /*
    494  * tprintf functions: used to send messages to a specific process
    495  *
    496  * usage:
    497  *   get a tpr_t handle on a process "p" by using "tprintf_open(p)"
    498  *   use the handle when calling "tprintf"
    499  *   when done, do a "tprintf_close" to drop the handle
    500  */
    501 
    502 /*
    503  * tprintf_open: get a tprintf handle on a process "p"
    504  *
    505  * => returns NULL if process can't be printed to
    506  */
    507 
    508 tpr_t
    509 tprintf_open(struct proc *p)
    510 {
    511 	tpr_t cookie;
    512 
    513 	cookie = NULL;
    514 
    515 	mutex_enter(proc_lock);
    516 	if (p->p_lflag & PL_CONTROLT && p->p_session->s_ttyvp) {
    517 		proc_sesshold(p->p_session);
    518 		cookie = (tpr_t)p->p_session;
    519 	}
    520 	mutex_exit(proc_lock);
    521 
    522 	return cookie;
    523 }
    524 
    525 /*
    526  * tprintf_close: dispose of a tprintf handle obtained with tprintf_open
    527  */
    528 
    529 void
    530 tprintf_close(tpr_t sess)
    531 {
    532 
    533 	if (sess) {
    534 		mutex_enter(proc_lock);
    535 		/* Releases proc_lock. */
    536 		proc_sessrele((struct session *)sess);
    537 	}
    538 }
    539 
    540 /*
    541  * tprintf: given tprintf handle to a process [obtained with tprintf_open],
    542  * send a message to the controlling tty for that process.
    543  *
    544  * => also sends message to /dev/klog
    545  */
    546 void
    547 tprintf(tpr_t tpr, const char *fmt, ...)
    548 {
    549 	struct session *sess = (struct session *)tpr;
    550 	struct tty *tp = NULL;
    551 	int flags = TOLOG;
    552 	va_list ap;
    553 
    554 	/* mutex_enter(proc_lock); XXXSMP */
    555 	if (sess && sess->s_ttyvp && ttycheckoutq(sess->s_ttyp, 0)) {
    556 		flags |= TOTTY;
    557 		tp = sess->s_ttyp;
    558 	}
    559 
    560 	kprintf_lock();
    561 
    562 	klogpri(LOG_INFO);
    563 	va_start(ap, fmt);
    564 	kprintf(fmt, flags, tp, NULL, ap);
    565 	va_end(ap);
    566 
    567 	kprintf_unlock();
    568 	/* mutex_exit(proc_lock);	XXXSMP */
    569 
    570 	logwakeup();
    571 }
    572 
    573 
    574 /*
    575  * ttyprintf: send a message to a specific tty
    576  *
    577  * => should be used only by tty driver or anything that knows the
    578  *    underlying tty will not be revoked(2)'d away.  [otherwise,
    579  *    use tprintf]
    580  */
    581 void
    582 ttyprintf(struct tty *tp, const char *fmt, ...)
    583 {
    584 	va_list ap;
    585 
    586 	/* No mutex needed; going to process TTY. */
    587 	va_start(ap, fmt);
    588 	kprintf(fmt, TOTTY, tp, NULL, ap);
    589 	va_end(ap);
    590 }
    591 
    592 #ifdef DDB
    593 
    594 /*
    595  * db_printf: printf for DDB (via db_putchar)
    596  */
    597 
    598 void
    599 db_printf(const char *fmt, ...)
    600 {
    601 	va_list ap;
    602 
    603 	/* No mutex needed; DDB pauses all processors. */
    604 	va_start(ap, fmt);
    605 	kprintf(fmt, TODDB, NULL, NULL, ap);
    606 	va_end(ap);
    607 
    608 	if (db_tee_msgbuf) {
    609 		va_start(ap, fmt);
    610 		kprintf(fmt, TOLOG, NULL, NULL, ap);
    611 		va_end(ap);
    612 	};
    613 }
    614 
    615 void
    616 db_vprintf(const char *fmt, va_list ap)
    617 {
    618 
    619 	/* No mutex needed; DDB pauses all processors. */
    620 	kprintf(fmt, TODDB, NULL, NULL, ap);
    621 	if (db_tee_msgbuf)
    622 		kprintf(fmt, TOLOG, NULL, NULL, ap);
    623 }
    624 
    625 #endif /* DDB */
    626 
    627 static void
    628 kprintf_internal(const char *fmt, int oflags, void *vp, char *sbuf, ...)
    629 {
    630 	va_list ap;
    631 
    632 	va_start(ap, sbuf);
    633 	(void)kprintf(fmt, oflags, vp, sbuf, ap);
    634 	va_end(ap);
    635 }
    636 
    637 /*
    638  * Device autoconfiguration printf routines.  These change their
    639  * behavior based on the AB_* flags in boothowto.  If AB_SILENT
    640  * is set, messages never go to the console (but they still always
    641  * go to the log).  AB_VERBOSE overrides AB_SILENT.
    642  */
    643 
    644 /*
    645  * aprint_normal: Send to console unless AB_QUIET.  Always goes
    646  * to the log.
    647  */
    648 static void
    649 aprint_normal_internal(const char *prefix, const char *fmt, va_list ap)
    650 {
    651 	int flags = TOLOG;
    652 
    653 	if ((boothowto & (AB_SILENT|AB_QUIET)) == 0 ||
    654 	    (boothowto & AB_VERBOSE) != 0)
    655 		flags |= TOCONS;
    656 
    657 	kprintf_lock();
    658 
    659 	if (prefix)
    660 		kprintf_internal("%s: ", flags, NULL, NULL, prefix);
    661 	kprintf(fmt, flags, NULL, NULL, ap);
    662 
    663 	kprintf_unlock();
    664 
    665 	if (!panicstr)
    666 		logwakeup();
    667 }
    668 
    669 void
    670 aprint_normal(const char *fmt, ...)
    671 {
    672 	va_list ap;
    673 
    674 	va_start(ap, fmt);
    675 	aprint_normal_internal(NULL, fmt, ap);
    676 	va_end(ap);
    677 }
    678 
    679 void
    680 aprint_normal_dev(device_t dv, const char *fmt, ...)
    681 {
    682 	va_list ap;
    683 
    684 	va_start(ap, fmt);
    685 	aprint_normal_internal(device_xname(dv), fmt, ap);
    686 	va_end(ap);
    687 }
    688 
    689 void
    690 aprint_normal_ifnet(struct ifnet *ifp, const char *fmt, ...)
    691 {
    692 	va_list ap;
    693 
    694 	va_start(ap, fmt);
    695 	aprint_normal_internal(ifp->if_xname, fmt, ap);
    696 	va_end(ap);
    697 }
    698 
    699 /*
    700  * aprint_error: Send to console unless AB_QUIET.  Always goes
    701  * to the log.  Also counts the number of times called so other
    702  * parts of the kernel can report the number of errors during a
    703  * given phase of system startup.
    704  */
    705 static int aprint_error_count;
    706 
    707 int
    708 aprint_get_error_count(void)
    709 {
    710 	int count;
    711 
    712 	kprintf_lock();
    713 
    714 	count = aprint_error_count;
    715 	aprint_error_count = 0;
    716 
    717 	kprintf_unlock();
    718 
    719 	return (count);
    720 }
    721 
    722 static void
    723 aprint_error_internal(const char *prefix, const char *fmt, va_list ap)
    724 {
    725 	int flags = TOLOG;
    726 
    727 	if ((boothowto & (AB_SILENT|AB_QUIET)) == 0 ||
    728 	    (boothowto & AB_VERBOSE) != 0)
    729 		flags |= TOCONS;
    730 
    731 	kprintf_lock();
    732 
    733 	aprint_error_count++;
    734 
    735 	if (prefix)
    736 		kprintf_internal("%s: ", flags, NULL, NULL, prefix);
    737 	kprintf(fmt, flags, NULL, NULL, ap);
    738 
    739 	kprintf_unlock();
    740 
    741 	if (!panicstr)
    742 		logwakeup();
    743 }
    744 
    745 void
    746 aprint_error(const char *fmt, ...)
    747 {
    748 	va_list ap;
    749 
    750 	va_start(ap, fmt);
    751 	aprint_error_internal(NULL, fmt, ap);
    752 	va_end(ap);
    753 }
    754 
    755 void
    756 aprint_error_dev(device_t dv, const char *fmt, ...)
    757 {
    758 	va_list ap;
    759 
    760 	va_start(ap, fmt);
    761 	aprint_error_internal(device_xname(dv), fmt, ap);
    762 	va_end(ap);
    763 }
    764 
    765 void
    766 aprint_error_ifnet(struct ifnet *ifp, const char *fmt, ...)
    767 {
    768 	va_list ap;
    769 
    770 	va_start(ap, fmt);
    771 	aprint_error_internal(ifp->if_xname, fmt, ap);
    772 	va_end(ap);
    773 }
    774 
    775 /*
    776  * aprint_naive: Send to console only if AB_QUIET.  Never goes
    777  * to the log.
    778  */
    779 static void
    780 aprint_naive_internal(const char *prefix, const char *fmt, va_list ap)
    781 {
    782 
    783 	if ((boothowto & (AB_QUIET|AB_SILENT|AB_VERBOSE)) != AB_QUIET)
    784 		return;
    785 
    786 	kprintf_lock();
    787 
    788 	if (prefix)
    789 		kprintf_internal("%s: ", TOCONS, NULL, NULL, prefix);
    790 	kprintf(fmt, TOCONS, NULL, NULL, ap);
    791 
    792 	kprintf_unlock();
    793 }
    794 
    795 void
    796 aprint_naive(const char *fmt, ...)
    797 {
    798 	va_list ap;
    799 
    800 	va_start(ap, fmt);
    801 	aprint_naive_internal(NULL, fmt, ap);
    802 	va_end(ap);
    803 }
    804 
    805 void
    806 aprint_naive_dev(device_t dv, const char *fmt, ...)
    807 {
    808 	va_list ap;
    809 
    810 	va_start(ap, fmt);
    811 	aprint_naive_internal(device_xname(dv), fmt, ap);
    812 	va_end(ap);
    813 }
    814 
    815 void
    816 aprint_naive_ifnet(struct ifnet *ifp, const char *fmt, ...)
    817 {
    818 	va_list ap;
    819 
    820 	va_start(ap, fmt);
    821 	aprint_naive_internal(ifp->if_xname, fmt, ap);
    822 	va_end(ap);
    823 }
    824 
    825 /*
    826  * aprint_verbose: Send to console only if AB_VERBOSE.  Always
    827  * goes to the log.
    828  */
    829 static void
    830 aprint_verbose_internal(const char *prefix, const char *fmt, va_list ap)
    831 {
    832 	int flags = TOLOG;
    833 
    834 	if (boothowto & AB_VERBOSE)
    835 		flags |= TOCONS;
    836 
    837 	kprintf_lock();
    838 
    839 	if (prefix)
    840 		kprintf_internal("%s: ", flags, NULL, NULL, prefix);
    841 	kprintf(fmt, flags, NULL, NULL, ap);
    842 
    843 	kprintf_unlock();
    844 
    845 	if (!panicstr)
    846 		logwakeup();
    847 }
    848 
    849 void
    850 aprint_verbose(const char *fmt, ...)
    851 {
    852 	va_list ap;
    853 
    854 	va_start(ap, fmt);
    855 	aprint_verbose_internal(NULL, fmt, ap);
    856 	va_end(ap);
    857 }
    858 
    859 void
    860 aprint_verbose_dev(device_t dv, const char *fmt, ...)
    861 {
    862 	va_list ap;
    863 
    864 	va_start(ap, fmt);
    865 	aprint_verbose_internal(device_xname(dv), fmt, ap);
    866 	va_end(ap);
    867 }
    868 
    869 void
    870 aprint_verbose_ifnet(struct ifnet *ifp, const char *fmt, ...)
    871 {
    872 	va_list ap;
    873 
    874 	va_start(ap, fmt);
    875 	aprint_verbose_internal(ifp->if_xname, fmt, ap);
    876 	va_end(ap);
    877 }
    878 
    879 /*
    880  * aprint_debug: Send to console and log only if AB_DEBUG.
    881  */
    882 static void
    883 aprint_debug_internal(const char *prefix, const char *fmt, va_list ap)
    884 {
    885 
    886 	if ((boothowto & AB_DEBUG) == 0)
    887 		return;
    888 
    889 	kprintf_lock();
    890 
    891 	if (prefix)
    892 		kprintf_internal("%s: ", TOCONS | TOLOG, NULL, NULL, prefix);
    893 	kprintf(fmt, TOCONS | TOLOG, NULL, NULL, ap);
    894 
    895 	kprintf_unlock();
    896 }
    897 
    898 void
    899 aprint_debug(const char *fmt, ...)
    900 {
    901 	va_list ap;
    902 
    903 	va_start(ap, fmt);
    904 	aprint_debug_internal(NULL, fmt, ap);
    905 	va_end(ap);
    906 }
    907 
    908 void
    909 aprint_debug_dev(device_t dv, const char *fmt, ...)
    910 {
    911 	va_list ap;
    912 
    913 	va_start(ap, fmt);
    914 	aprint_debug_internal(device_xname(dv), fmt, ap);
    915 	va_end(ap);
    916 }
    917 
    918 void
    919 aprint_debug_ifnet(struct ifnet *ifp, const char *fmt, ...)
    920 {
    921 	va_list ap;
    922 
    923 	va_start(ap, fmt);
    924 	aprint_debug_internal(ifp->if_xname, fmt, ap);
    925 	va_end(ap);
    926 }
    927 
    928 void
    929 printf_tolog(const char *fmt, ...)
    930 {
    931 	va_list ap;
    932 
    933 	kprintf_lock();
    934 
    935 	va_start(ap, fmt);
    936 	(void)kprintf(fmt, TOLOG, NULL, NULL, ap);
    937 	va_end(ap);
    938 
    939 	kprintf_unlock();
    940 }
    941 
    942 /*
    943  * printf_nolog: Like printf(), but does not send message to the log.
    944  */
    945 
    946 void
    947 printf_nolog(const char *fmt, ...)
    948 {
    949 	va_list ap;
    950 
    951 	kprintf_lock();
    952 
    953 	va_start(ap, fmt);
    954 	kprintf(fmt, TOCONS, NULL, NULL, ap);
    955 	va_end(ap);
    956 
    957 	kprintf_unlock();
    958 }
    959 
    960 /*
    961  * normal kernel printf functions: printf, vprintf, snprintf, vsnprintf
    962  */
    963 
    964 /*
    965  * printf: print a message to the console and the log
    966  */
    967 void
    968 printf(const char *fmt, ...)
    969 {
    970 	va_list ap;
    971 
    972 	kprintf_lock();
    973 
    974 	va_start(ap, fmt);
    975 	kprintf(fmt, TOCONS | TOLOG, NULL, NULL, ap);
    976 	va_end(ap);
    977 
    978 	kprintf_unlock();
    979 
    980 	if (!panicstr)
    981 		logwakeup();
    982 }
    983 
    984 /*
    985  * vprintf: print a message to the console and the log [already have
    986  *	va_alist]
    987  */
    988 
    989 void
    990 vprintf(const char *fmt, va_list ap)
    991 {
    992 
    993 	kprintf_lock();
    994 
    995 	kprintf(fmt, TOCONS | TOLOG, NULL, NULL, ap);
    996 
    997 	kprintf_unlock();
    998 
    999 	if (!panicstr)
   1000 		logwakeup();
   1001 }
   1002 
   1003 /*
   1004  * sprintf: print a message to a buffer
   1005  */
   1006 int
   1007 sprintf(char *bf, const char *fmt, ...)
   1008 {
   1009 	int retval;
   1010 	va_list ap;
   1011 
   1012 	va_start(ap, fmt);
   1013 	retval = kprintf(fmt, TOBUFONLY, NULL, bf, ap);
   1014 	va_end(ap);
   1015 	*(bf + retval) = 0;	/* null terminate */
   1016 	return(retval);
   1017 }
   1018 
   1019 /*
   1020  * vsprintf: print a message to a buffer [already have va_alist]
   1021  */
   1022 
   1023 int
   1024 vsprintf(char *bf, const char *fmt, va_list ap)
   1025 {
   1026 	int retval;
   1027 
   1028 	retval = kprintf(fmt, TOBUFONLY, NULL, bf, ap);
   1029 	*(bf + retval) = 0;	/* null terminate */
   1030 	return (retval);
   1031 }
   1032 
   1033 /*
   1034  * snprintf: print a message to a buffer
   1035  */
   1036 int
   1037 snprintf(char *bf, size_t size, const char *fmt, ...)
   1038 {
   1039 	int retval;
   1040 	va_list ap;
   1041 	char *p;
   1042 
   1043 	if (size < 1)
   1044 		return (-1);
   1045 	p = bf + size - 1;
   1046 	va_start(ap, fmt);
   1047 	retval = kprintf(fmt, TOBUFONLY, &p, bf, ap);
   1048 	va_end(ap);
   1049 	*(p) = 0;	/* null terminate */
   1050 	return(retval);
   1051 }
   1052 
   1053 /*
   1054  * vsnprintf: print a message to a buffer [already have va_alist]
   1055  */
   1056 int
   1057 vsnprintf(char *bf, size_t size, const char *fmt, va_list ap)
   1058 {
   1059 	int retval;
   1060 	char *p;
   1061 
   1062 	if (size < 1)
   1063 		return (-1);
   1064 	p = bf + size - 1;
   1065 	retval = kprintf(fmt, TOBUFONLY, &p, bf, ap);
   1066 	*(p) = 0;	/* null terminate */
   1067 	return(retval);
   1068 }
   1069 
   1070 /*
   1071  * kprintf: scaled down version of printf(3).
   1072  *
   1073  * this version based on vfprintf() from libc which was derived from
   1074  * software contributed to Berkeley by Chris Torek.
   1075  *
   1076  * NOTE: The kprintf mutex must be held if we're going TOBUF or TOCONS!
   1077  */
   1078 
   1079 /*
   1080  * macros for converting digits to letters and vice versa
   1081  */
   1082 #define	to_digit(c)	((c) - '0')
   1083 #define is_digit(c)	((unsigned)to_digit(c) <= 9)
   1084 #define	to_char(n)	((n) + '0')
   1085 
   1086 /*
   1087  * flags used during conversion.
   1088  */
   1089 #define	ALT		0x001		/* alternate form */
   1090 #define	HEXPREFIX	0x002		/* add 0x or 0X prefix */
   1091 #define	LADJUST		0x004		/* left adjustment */
   1092 #define	LONGDBL		0x008		/* long double; unimplemented */
   1093 #define	LONGINT		0x010		/* long integer */
   1094 #define	QUADINT		0x020		/* quad integer */
   1095 #define	SHORTINT	0x040		/* short integer */
   1096 #define	MAXINT		0x080		/* intmax_t */
   1097 #define	PTRINT		0x100		/* intptr_t */
   1098 #define	SIZEINT		0x200		/* size_t */
   1099 #define	ZEROPAD		0x400		/* zero (as opposed to blank) pad */
   1100 #define FPT		0x800		/* Floating point number */
   1101 
   1102 	/*
   1103 	 * To extend shorts properly, we need both signed and unsigned
   1104 	 * argument extraction methods.
   1105 	 */
   1106 #define	SARG() \
   1107 	(flags&MAXINT ? va_arg(ap, intmax_t) : \
   1108 	    flags&PTRINT ? va_arg(ap, intptr_t) : \
   1109 	    flags&SIZEINT ? va_arg(ap, ssize_t) : /* XXX */ \
   1110 	    flags&QUADINT ? va_arg(ap, quad_t) : \
   1111 	    flags&LONGINT ? va_arg(ap, long) : \
   1112 	    flags&SHORTINT ? (long)(short)va_arg(ap, int) : \
   1113 	    (long)va_arg(ap, int))
   1114 #define	UARG() \
   1115 	(flags&MAXINT ? va_arg(ap, uintmax_t) : \
   1116 	    flags&PTRINT ? va_arg(ap, uintptr_t) : \
   1117 	    flags&SIZEINT ? va_arg(ap, size_t) : \
   1118 	    flags&QUADINT ? va_arg(ap, u_quad_t) : \
   1119 	    flags&LONGINT ? va_arg(ap, u_long) : \
   1120 	    flags&SHORTINT ? (u_long)(u_short)va_arg(ap, int) : \
   1121 	    (u_long)va_arg(ap, u_int))
   1122 
   1123 #define KPRINTF_PUTCHAR(C) {						\
   1124 	if (oflags == TOBUFONLY) {					\
   1125 		if ((vp != NULL) && (sbuf == tailp)) {			\
   1126 			ret += 1;		/* indicate error */	\
   1127 			goto overflow;					\
   1128 		}							\
   1129 		*sbuf++ = (C);						\
   1130 	} else {							\
   1131 		putchar((C), oflags, (struct tty *)vp);			\
   1132 	}								\
   1133 }
   1134 
   1135 /*
   1136  * Guts of kernel printf.  Note, we already expect to be in a mutex!
   1137  */
   1138 int
   1139 kprintf(const char *fmt0, int oflags, void *vp, char *sbuf, va_list ap)
   1140 {
   1141 	const char *fmt;	/* format string */
   1142 	int ch;			/* character from fmt */
   1143 	int n;			/* handy integer (short term usage) */
   1144 	char *cp;		/* handy char pointer (short term usage) */
   1145 	int flags;		/* flags as above */
   1146 	int ret;		/* return value accumulator */
   1147 	int width;		/* width from format (%8d), or 0 */
   1148 	int prec;		/* precision from format (%.3d), or -1 */
   1149 	char sign;		/* sign prefix (' ', '+', '-', or \0) */
   1150 
   1151 	u_quad_t _uquad;	/* integer arguments %[diouxX] */
   1152 	enum { OCT, DEC, HEX } base;/* base for [diouxX] conversion */
   1153 	int dprec;		/* a copy of prec if [diouxX], 0 otherwise */
   1154 	int realsz;		/* field size expanded by dprec */
   1155 	int size;		/* size of converted field or string */
   1156 	const char *xdigs;	/* digits for [xX] conversion */
   1157 	char bf[KPRINTF_BUFSIZE]; /* space for %c, %[diouxX] */
   1158 	char *tailp;		/* tail pointer for snprintf */
   1159 
   1160 	tailp = NULL;	/* XXX: shutup gcc */
   1161 	if (oflags == TOBUFONLY && (vp != NULL))
   1162 		tailp = *(char **)vp;
   1163 
   1164 	cp = NULL;	/* XXX: shutup gcc */
   1165 	size = 0;	/* XXX: shutup gcc */
   1166 
   1167 	fmt = fmt0;
   1168 	ret = 0;
   1169 
   1170 	xdigs = NULL;		/* XXX: shut up gcc warning */
   1171 
   1172 	/*
   1173 	 * Scan the format for conversions (`%' character).
   1174 	 */
   1175 	for (;;) {
   1176 		while (*fmt != '%' && *fmt) {
   1177 			ret++;
   1178 			KPRINTF_PUTCHAR(*fmt++);
   1179 		}
   1180 		if (*fmt == 0)
   1181 			goto done;
   1182 
   1183 		fmt++;		/* skip over '%' */
   1184 
   1185 		flags = 0;
   1186 		dprec = 0;
   1187 		width = 0;
   1188 		prec = -1;
   1189 		sign = '\0';
   1190 
   1191 rflag:		ch = *fmt++;
   1192 reswitch:	switch (ch) {
   1193 		case ' ':
   1194 			/*
   1195 			 * ``If the space and + flags both appear, the space
   1196 			 * flag will be ignored.''
   1197 			 *	-- ANSI X3J11
   1198 			 */
   1199 			if (!sign)
   1200 				sign = ' ';
   1201 			goto rflag;
   1202 		case '#':
   1203 			flags |= ALT;
   1204 			goto rflag;
   1205 		case '*':
   1206 			/*
   1207 			 * ``A negative field width argument is taken as a
   1208 			 * - flag followed by a positive field width.''
   1209 			 *	-- ANSI X3J11
   1210 			 * They don't exclude field widths read from args.
   1211 			 */
   1212 			if ((width = va_arg(ap, int)) >= 0)
   1213 				goto rflag;
   1214 			width = -width;
   1215 			/* FALLTHROUGH */
   1216 		case '-':
   1217 			flags |= LADJUST;
   1218 			goto rflag;
   1219 		case '+':
   1220 			sign = '+';
   1221 			goto rflag;
   1222 		case '.':
   1223 			if ((ch = *fmt++) == '*') {
   1224 				n = va_arg(ap, int);
   1225 				prec = n < 0 ? -1 : n;
   1226 				goto rflag;
   1227 			}
   1228 			n = 0;
   1229 			while (is_digit(ch)) {
   1230 				n = 10 * n + to_digit(ch);
   1231 				ch = *fmt++;
   1232 			}
   1233 			prec = n < 0 ? -1 : n;
   1234 			goto reswitch;
   1235 		case '0':
   1236 			/*
   1237 			 * ``Note that 0 is taken as a flag, not as the
   1238 			 * beginning of a field width.''
   1239 			 *	-- ANSI X3J11
   1240 			 */
   1241 			flags |= ZEROPAD;
   1242 			goto rflag;
   1243 		case '1': case '2': case '3': case '4':
   1244 		case '5': case '6': case '7': case '8': case '9':
   1245 			n = 0;
   1246 			do {
   1247 				n = 10 * n + to_digit(ch);
   1248 				ch = *fmt++;
   1249 			} while (is_digit(ch));
   1250 			width = n;
   1251 			goto reswitch;
   1252 		case 'h':
   1253 			flags |= SHORTINT;
   1254 			goto rflag;
   1255 		case 'j':
   1256 			flags |= MAXINT;
   1257 			goto rflag;
   1258 		case 'l':
   1259 			if (*fmt == 'l') {
   1260 				fmt++;
   1261 				flags |= QUADINT;
   1262 			} else {
   1263 				flags |= LONGINT;
   1264 			}
   1265 			goto rflag;
   1266 		case 'q':
   1267 			flags |= QUADINT;
   1268 			goto rflag;
   1269 		case 't':
   1270 			flags |= PTRINT;
   1271 			goto rflag;
   1272 		case 'z':
   1273 			flags |= SIZEINT;
   1274 			goto rflag;
   1275 		case 'c':
   1276 			*(cp = bf) = va_arg(ap, int);
   1277 			size = 1;
   1278 			sign = '\0';
   1279 			break;
   1280 		case 'D':
   1281 			flags |= LONGINT;
   1282 			/*FALLTHROUGH*/
   1283 		case 'd':
   1284 		case 'i':
   1285 			_uquad = SARG();
   1286 			if ((quad_t)_uquad < 0) {
   1287 				_uquad = -_uquad;
   1288 				sign = '-';
   1289 			}
   1290 			base = DEC;
   1291 			goto number;
   1292 		case 'n':
   1293 			if (flags & MAXINT)
   1294 				*va_arg(ap, intmax_t *) = ret;
   1295 			else if (flags & PTRINT)
   1296 				*va_arg(ap, intptr_t *) = ret;
   1297 			else if (flags & SIZEINT)
   1298 				*va_arg(ap, ssize_t *) = ret;
   1299 			else if (flags & QUADINT)
   1300 				*va_arg(ap, quad_t *) = ret;
   1301 			else if (flags & LONGINT)
   1302 				*va_arg(ap, long *) = ret;
   1303 			else if (flags & SHORTINT)
   1304 				*va_arg(ap, short *) = ret;
   1305 			else
   1306 				*va_arg(ap, int *) = ret;
   1307 			continue;	/* no output */
   1308 		case 'O':
   1309 			flags |= LONGINT;
   1310 			/*FALLTHROUGH*/
   1311 		case 'o':
   1312 			_uquad = UARG();
   1313 			base = OCT;
   1314 			goto nosign;
   1315 		case 'p':
   1316 			/*
   1317 			 * ``The argument shall be a pointer to void.  The
   1318 			 * value of the pointer is converted to a sequence
   1319 			 * of printable characters, in an implementation-
   1320 			 * defined manner.''
   1321 			 *	-- ANSI X3J11
   1322 			 */
   1323 			/* NOSTRICT */
   1324 			_uquad = (u_long)va_arg(ap, void *);
   1325 			base = HEX;
   1326 			xdigs = hexdigits;
   1327 			flags |= HEXPREFIX;
   1328 			ch = 'x';
   1329 			goto nosign;
   1330 		case 's':
   1331 			if ((cp = va_arg(ap, char *)) == NULL)
   1332 				/*XXXUNCONST*/
   1333 				cp = __UNCONST("(null)");
   1334 			if (prec >= 0) {
   1335 				/*
   1336 				 * can't use strlen; can only look for the
   1337 				 * NUL in the first `prec' characters, and
   1338 				 * strlen() will go further.
   1339 				 */
   1340 				char *p = memchr(cp, 0, prec);
   1341 
   1342 				if (p != NULL) {
   1343 					size = p - cp;
   1344 					if (size > prec)
   1345 						size = prec;
   1346 				} else
   1347 					size = prec;
   1348 			} else
   1349 				size = strlen(cp);
   1350 			sign = '\0';
   1351 			break;
   1352 		case 'U':
   1353 			flags |= LONGINT;
   1354 			/*FALLTHROUGH*/
   1355 		case 'u':
   1356 			_uquad = UARG();
   1357 			base = DEC;
   1358 			goto nosign;
   1359 		case 'X':
   1360 			xdigs = HEXDIGITS;
   1361 			goto hex;
   1362 		case 'x':
   1363 			xdigs = hexdigits;
   1364 hex:			_uquad = UARG();
   1365 			base = HEX;
   1366 			/* leading 0x/X only if non-zero */
   1367 			if (flags & ALT && _uquad != 0)
   1368 				flags |= HEXPREFIX;
   1369 
   1370 			/* unsigned conversions */
   1371 nosign:			sign = '\0';
   1372 			/*
   1373 			 * ``... diouXx conversions ... if a precision is
   1374 			 * specified, the 0 flag will be ignored.''
   1375 			 *	-- ANSI X3J11
   1376 			 */
   1377 number:			if ((dprec = prec) >= 0)
   1378 				flags &= ~ZEROPAD;
   1379 
   1380 			/*
   1381 			 * ``The result of converting a zero value with an
   1382 			 * explicit precision of zero is no characters.''
   1383 			 *	-- ANSI X3J11
   1384 			 */
   1385 			cp = bf + KPRINTF_BUFSIZE;
   1386 			if (_uquad != 0 || prec != 0) {
   1387 				/*
   1388 				 * Unsigned mod is hard, and unsigned mod
   1389 				 * by a constant is easier than that by
   1390 				 * a variable; hence this switch.
   1391 				 */
   1392 				switch (base) {
   1393 				case OCT:
   1394 					do {
   1395 						*--cp = to_char(_uquad & 7);
   1396 						_uquad >>= 3;
   1397 					} while (_uquad);
   1398 					/* handle octal leading 0 */
   1399 					if (flags & ALT && *cp != '0')
   1400 						*--cp = '0';
   1401 					break;
   1402 
   1403 				case DEC:
   1404 					/* many numbers are 1 digit */
   1405 					while (_uquad >= 10) {
   1406 						*--cp = to_char(_uquad % 10);
   1407 						_uquad /= 10;
   1408 					}
   1409 					*--cp = to_char(_uquad);
   1410 					break;
   1411 
   1412 				case HEX:
   1413 					do {
   1414 						*--cp = xdigs[_uquad & 15];
   1415 						_uquad >>= 4;
   1416 					} while (_uquad);
   1417 					break;
   1418 
   1419 				default:
   1420 					/*XXXUNCONST*/
   1421 					cp = __UNCONST("bug in kprintf: bad base");
   1422 					size = strlen(cp);
   1423 					goto skipsize;
   1424 				}
   1425 			}
   1426 			size = bf + KPRINTF_BUFSIZE - cp;
   1427 		skipsize:
   1428 			break;
   1429 		default:	/* "%?" prints ?, unless ? is NUL */
   1430 			if (ch == '\0')
   1431 				goto done;
   1432 			/* pretend it was %c with argument ch */
   1433 			cp = bf;
   1434 			*cp = ch;
   1435 			size = 1;
   1436 			sign = '\0';
   1437 			break;
   1438 		}
   1439 
   1440 		/*
   1441 		 * All reasonable formats wind up here.  At this point, `cp'
   1442 		 * points to a string which (if not flags&LADJUST) should be
   1443 		 * padded out to `width' places.  If flags&ZEROPAD, it should
   1444 		 * first be prefixed by any sign or other prefix; otherwise,
   1445 		 * it should be blank padded before the prefix is emitted.
   1446 		 * After any left-hand padding and prefixing, emit zeroes
   1447 		 * required by a decimal [diouxX] precision, then print the
   1448 		 * string proper, then emit zeroes required by any leftover
   1449 		 * floating precision; finally, if LADJUST, pad with blanks.
   1450 		 *
   1451 		 * Compute actual size, so we know how much to pad.
   1452 		 * size excludes decimal prec; realsz includes it.
   1453 		 */
   1454 		realsz = dprec > size ? dprec : size;
   1455 		if (sign)
   1456 			realsz++;
   1457 		else if (flags & HEXPREFIX)
   1458 			realsz+= 2;
   1459 
   1460 		/* adjust ret */
   1461 		ret += width > realsz ? width : realsz;
   1462 
   1463 		/* right-adjusting blank padding */
   1464 		if ((flags & (LADJUST|ZEROPAD)) == 0) {
   1465 			n = width - realsz;
   1466 			while (n-- > 0)
   1467 				KPRINTF_PUTCHAR(' ');
   1468 		}
   1469 
   1470 		/* prefix */
   1471 		if (sign) {
   1472 			KPRINTF_PUTCHAR(sign);
   1473 		} else if (flags & HEXPREFIX) {
   1474 			KPRINTF_PUTCHAR('0');
   1475 			KPRINTF_PUTCHAR(ch);
   1476 		}
   1477 
   1478 		/* right-adjusting zero padding */
   1479 		if ((flags & (LADJUST|ZEROPAD)) == ZEROPAD) {
   1480 			n = width - realsz;
   1481 			while (n-- > 0)
   1482 				KPRINTF_PUTCHAR('0');
   1483 		}
   1484 
   1485 		/* leading zeroes from decimal precision */
   1486 		n = dprec - size;
   1487 		while (n-- > 0)
   1488 			KPRINTF_PUTCHAR('0');
   1489 
   1490 		/* the string or number proper */
   1491 		while (size--)
   1492 			KPRINTF_PUTCHAR(*cp++);
   1493 		/* left-adjusting padding (always blank) */
   1494 		if (flags & LADJUST) {
   1495 			n = width - realsz;
   1496 			while (n-- > 0)
   1497 				KPRINTF_PUTCHAR(' ');
   1498 		}
   1499 	}
   1500 
   1501 done:
   1502 	if ((oflags == TOBUFONLY) && (vp != NULL))
   1503 		*(char **)vp = sbuf;
   1504 	(*v_flush)();
   1505 overflow:
   1506 	return (ret);
   1507 	/* NOTREACHED */
   1508 }
   1509