if_ether.h revision 1.49
1 /* $NetBSD: if_ether.h,v 1.49 2008/02/20 17:05:52 matt Exp $ */ 2 3 /* 4 * Copyright (c) 1982, 1986, 1993 5 * The Regents of the University of California. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. Neither the name of the University nor the names of its contributors 16 * may be used to endorse or promote products derived from this software 17 * without specific prior written permission. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 22 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 23 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 29 * SUCH DAMAGE. 30 * 31 * @(#)if_ether.h 8.1 (Berkeley) 6/10/93 32 */ 33 34 #ifndef _NET_IF_ETHER_H_ 35 #define _NET_IF_ETHER_H_ 36 37 #ifdef _KERNEL 38 #ifdef _KERNEL_OPT 39 #include "opt_mbuftrace.h" 40 #endif 41 #include <sys/mbuf.h> 42 #endif 43 44 /* 45 * Some basic Ethernet constants. 46 */ 47 #define ETHER_ADDR_LEN 6 /* length of an Ethernet address */ 48 #define ETHER_TYPE_LEN 2 /* length of the Ethernet type field */ 49 #define ETHER_CRC_LEN 4 /* length of the Ethernet CRC */ 50 #define ETHER_HDR_LEN ((ETHER_ADDR_LEN * 2) + ETHER_TYPE_LEN) 51 #define ETHER_MIN_LEN 64 /* minimum frame length, including CRC */ 52 #define ETHER_MAX_LEN 1518 /* maximum frame length, including CRC */ 53 #define ETHER_MAX_LEN_JUMBO 9018 /* maximum jumbo frame len, including CRC */ 54 55 /* 56 * Some Ethernet extensions. 57 */ 58 #define ETHER_VLAN_ENCAP_LEN 4 /* length of 802.1Q VLAN encapsulation */ 59 60 /* 61 * Ethernet address - 6 octets 62 * this is only used by the ethers(3) functions. 63 */ 64 struct ether_addr { 65 uint8_t ether_addr_octet[ETHER_ADDR_LEN]; 66 } __packed; 67 68 /* 69 * Structure of a 10Mb/s Ethernet header. 70 */ 71 struct ether_header { 72 uint8_t ether_dhost[ETHER_ADDR_LEN]; 73 uint8_t ether_shost[ETHER_ADDR_LEN]; 74 uint16_t ether_type; 75 } __packed; 76 77 #include <net/ethertypes.h> 78 79 #define ETHER_IS_MULTICAST(addr) (*(addr) & 0x01) /* is address mcast/bcast? */ 80 81 #define ETHERMTU_JUMBO (ETHER_MAX_LEN_JUMBO - ETHER_HDR_LEN - ETHER_CRC_LEN) 82 #define ETHERMTU (ETHER_MAX_LEN - ETHER_HDR_LEN - ETHER_CRC_LEN) 83 #define ETHERMIN (ETHER_MIN_LEN - ETHER_HDR_LEN - ETHER_CRC_LEN) 84 85 /* 86 * Compute the maximum frame size based on ethertype (i.e. possible 87 * encapsulation) and whether or not an FCS is present. 88 */ 89 #define ETHER_MAX_FRAME(ifp, etype, hasfcs) \ 90 ((ifp)->if_mtu + ETHER_HDR_LEN + \ 91 ((hasfcs) ? ETHER_CRC_LEN : 0) + \ 92 (((etype) == ETHERTYPE_VLAN) ? ETHER_VLAN_ENCAP_LEN : 0)) 93 94 /* 95 * Ethernet CRC32 polynomials (big- and little-endian verions). 96 */ 97 #define ETHER_CRC_POLY_LE 0xedb88320 98 #define ETHER_CRC_POLY_BE 0x04c11db6 99 100 #ifndef _STANDALONE 101 102 /* 103 * Ethernet-specific mbuf flags. 104 */ 105 #define M_HASFCS M_LINK0 /* FCS included at end of frame */ 106 #define M_PROMISC M_LINK1 /* this packet is not for us */ 107 108 #ifdef _KERNEL 109 /* 110 * Macro to map an IP multicast address to an Ethernet multicast address. 111 * The high-order 25 bits of the Ethernet address are statically assigned, 112 * and the low-order 23 bits are taken from the low end of the IP address. 113 */ 114 #define ETHER_MAP_IP_MULTICAST(ipaddr, enaddr) \ 115 /* const struct in_addr *ipaddr; */ \ 116 /* uint8_t enaddr[ETHER_ADDR_LEN]; */ \ 117 do { \ 118 (enaddr)[0] = 0x01; \ 119 (enaddr)[1] = 0x00; \ 120 (enaddr)[2] = 0x5e; \ 121 (enaddr)[3] = ((const uint8_t *)ipaddr)[1] & 0x7f; \ 122 (enaddr)[4] = ((const uint8_t *)ipaddr)[2]; \ 123 (enaddr)[5] = ((const uint8_t *)ipaddr)[3]; \ 124 } while (/*CONSTCOND*/0) 125 /* 126 * Macro to map an IP6 multicast address to an Ethernet multicast address. 127 * The high-order 16 bits of the Ethernet address are statically assigned, 128 * and the low-order 32 bits are taken from the low end of the IP6 address. 129 */ 130 #define ETHER_MAP_IPV6_MULTICAST(ip6addr, enaddr) \ 131 /* struct in6_addr *ip6addr; */ \ 132 /* uint8_t enaddr[ETHER_ADDR_LEN]; */ \ 133 { \ 134 (enaddr)[0] = 0x33; \ 135 (enaddr)[1] = 0x33; \ 136 (enaddr)[2] = ((const uint8_t *)ip6addr)[12]; \ 137 (enaddr)[3] = ((const uint8_t *)ip6addr)[13]; \ 138 (enaddr)[4] = ((const uint8_t *)ip6addr)[14]; \ 139 (enaddr)[5] = ((const uint8_t *)ip6addr)[15]; \ 140 } 141 #endif 142 143 struct mii_data; 144 145 /* 146 * Structure shared between the ethernet driver modules and 147 * the multicast list code. For example, each ec_softc or il_softc 148 * begins with this structure. 149 */ 150 struct ethercom { 151 struct ifnet ec_if; /* network-visible interface */ 152 LIST_HEAD(, ether_multi) ec_multiaddrs; /* list of ether multicast 153 addrs */ 154 int ec_multicnt; /* length of ec_multiaddrs 155 list */ 156 int ec_capabilities; /* capabilities, provided by 157 driver */ 158 int ec_capenable; /* tells hardware which 159 capabilities to enable */ 160 161 int ec_nvlans; /* # VLANs on this interface */ 162 /* The device handle for the MII bus child device. */ 163 struct mii_data *ec_mii; 164 #ifdef MBUFTRACE 165 struct mowner ec_rx_mowner; /* mbufs received */ 166 struct mowner ec_tx_mowner; /* mbufs transmitted */ 167 #endif 168 }; 169 170 #define ETHERCAP_VLAN_MTU 0x00000001 /* VLAN-compatible MTU */ 171 #define ETHERCAP_VLAN_HWTAGGING 0x00000002 /* hardware VLAN tag support */ 172 #define ETHERCAP_JUMBO_MTU 0x00000004 /* 9000 byte MTU supported */ 173 174 #ifdef _KERNEL 175 extern const uint8_t etherbroadcastaddr[ETHER_ADDR_LEN]; 176 extern const uint8_t ethermulticastaddr_slowprotocols[ETHER_ADDR_LEN]; 177 extern const uint8_t ether_ipmulticast_min[ETHER_ADDR_LEN]; 178 extern const uint8_t ether_ipmulticast_max[ETHER_ADDR_LEN]; 179 180 int ether_ioctl(struct ifnet *, u_long, void *); 181 int ether_addmulti(const struct sockaddr *, struct ethercom *); 182 int ether_delmulti(const struct sockaddr *, struct ethercom *); 183 int ether_multiaddr(const struct sockaddr *, uint8_t[], uint8_t[]); 184 #endif /* _KERNEL */ 185 186 /* 187 * Ethernet multicast address structure. There is one of these for each 188 * multicast address or range of multicast addresses that we are supposed 189 * to listen to on a particular interface. They are kept in a linked list, 190 * rooted in the interface's ethercom structure. 191 */ 192 struct ether_multi { 193 uint8_t enm_addrlo[ETHER_ADDR_LEN]; /* low or only address of range */ 194 uint8_t enm_addrhi[ETHER_ADDR_LEN]; /* high or only address of range */ 195 u_int enm_refcount; /* no. claims to this addr/range */ 196 LIST_ENTRY(ether_multi) enm_list; 197 }; 198 199 /* 200 * Structure used by macros below to remember position when stepping through 201 * all of the ether_multi records. 202 */ 203 struct ether_multistep { 204 struct ether_multi *e_enm; 205 }; 206 207 /* 208 * Macro for looking up the ether_multi record for a given range of Ethernet 209 * multicast addresses connected to a given ethercom structure. If no matching 210 * record is found, "enm" returns NULL. 211 */ 212 #define ETHER_LOOKUP_MULTI(addrlo, addrhi, ec, enm) \ 213 /* uint8_t addrlo[ETHER_ADDR_LEN]; */ \ 214 /* uint8_t addrhi[ETHER_ADDR_LEN]; */ \ 215 /* struct ethercom *ec; */ \ 216 /* struct ether_multi *enm; */ \ 217 { \ 218 for ((enm) = LIST_FIRST(&(ec)->ec_multiaddrs); \ 219 (enm) != NULL && \ 220 (bcmp((enm)->enm_addrlo, (addrlo), ETHER_ADDR_LEN) != 0 || \ 221 bcmp((enm)->enm_addrhi, (addrhi), ETHER_ADDR_LEN) != 0); \ 222 (enm) = LIST_NEXT((enm), enm_list)); \ 223 } 224 225 /* 226 * Macro to step through all of the ether_multi records, one at a time. 227 * The current position is remembered in "step", which the caller must 228 * provide. ETHER_FIRST_MULTI(), below, must be called to initialize "step" 229 * and get the first record. Both macros return a NULL "enm" when there 230 * are no remaining records. 231 */ 232 #define ETHER_NEXT_MULTI(step, enm) \ 233 /* struct ether_multistep step; */ \ 234 /* struct ether_multi *enm; */ \ 235 { \ 236 if (((enm) = (step).e_enm) != NULL) \ 237 (step).e_enm = LIST_NEXT((enm), enm_list); \ 238 } 239 240 #define ETHER_FIRST_MULTI(step, ec, enm) \ 241 /* struct ether_multistep step; */ \ 242 /* struct ethercom *ec; */ \ 243 /* struct ether_multi *enm; */ \ 244 { \ 245 (step).e_enm = LIST_FIRST(&(ec)->ec_multiaddrs); \ 246 ETHER_NEXT_MULTI((step), (enm)); \ 247 } 248 249 #ifdef _KERNEL 250 251 /* 252 * Ethernet 802.1Q VLAN structures. 253 */ 254 255 /* add VLAN tag to input/received packet */ 256 #define VLAN_INPUT_TAG(ifp, m, vlanid, _errcase) \ 257 do { \ 258 struct m_tag *mtag = \ 259 m_tag_get(PACKET_TAG_VLAN, sizeof(u_int), M_NOWAIT);\ 260 if (mtag == NULL) { \ 261 ifp->if_ierrors++; \ 262 printf("%s: unable to allocate VLAN tag\n", \ 263 ifp->if_xname); \ 264 m_freem(m); \ 265 _errcase; \ 266 } \ 267 *(u_int *)(mtag + 1) = vlanid; \ 268 m_tag_prepend(m, mtag); \ 269 } while(0) 270 271 /* extract VLAN tag from output/trasmit packet */ 272 #define VLAN_OUTPUT_TAG(ec, m0) \ 273 VLAN_ATTACHED(ec) ? m_tag_find((m0), PACKET_TAG_VLAN, NULL) : NULL 274 275 /* extract VLAN ID value from a VLAN tag */ 276 #define VLAN_TAG_VALUE(mtag) \ 277 ((*(u_int *)(mtag + 1)) & 4095) 278 279 /* test if any VLAN is configured for this interface */ 280 #define VLAN_ATTACHED(ec) ((ec)->ec_nvlans > 0) 281 282 void ether_ifattach(struct ifnet *, const uint8_t *); 283 void ether_ifdetach(struct ifnet *); 284 int ether_mediachange(struct ifnet *); 285 void ether_mediastatus(struct ifnet *, struct ifmediareq *); 286 287 char *ether_sprintf(const uint8_t *); 288 char *ether_snprintf(char *, size_t, const uint8_t *); 289 290 uint32_t ether_crc32_le(const uint8_t *, size_t); 291 uint32_t ether_crc32_be(const uint8_t *, size_t); 292 293 int ether_nonstatic_aton(u_char *, char *); 294 #else 295 /* 296 * Prototype ethers(3) functions. 297 */ 298 #include <sys/cdefs.h> 299 __BEGIN_DECLS 300 char * ether_ntoa __P((const struct ether_addr *)); 301 struct ether_addr * 302 ether_aton __P((const char *)); 303 int ether_ntohost __P((char *, const struct ether_addr *)); 304 int ether_hostton __P((const char *, struct ether_addr *)); 305 int ether_line __P((const char *, struct ether_addr *, char *)); 306 __END_DECLS 307 #endif 308 309 #endif /* _STANDALONE */ 310 311 #endif /* !_NET_IF_ETHER_H_ */ 312
Indexes created Tue Sep 23 14:10:03 GMT 2025