Home | History | Annotate | Line # | Download | only in net
if_ether.h revision 1.64.4.1
      1 /*	$NetBSD: if_ether.h,v 1.64.4.1 2015/12/27 12:10:06 skrll Exp $	*/
      2 
      3 /*
      4  * Copyright (c) 1982, 1986, 1993
      5  *	The Regents of the University of California.  All rights reserved.
      6  *
      7  * Redistribution and use in source and binary forms, with or without
      8  * modification, are permitted provided that the following conditions
      9  * are met:
     10  * 1. Redistributions of source code must retain the above copyright
     11  *    notice, this list of conditions and the following disclaimer.
     12  * 2. Redistributions in binary form must reproduce the above copyright
     13  *    notice, this list of conditions and the following disclaimer in the
     14  *    documentation and/or other materials provided with the distribution.
     15  * 3. Neither the name of the University nor the names of its contributors
     16  *    may be used to endorse or promote products derived from this software
     17  *    without specific prior written permission.
     18  *
     19  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
     20  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     21  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     22  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
     23  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     24  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     25  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     26  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     27  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     28  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     29  * SUCH DAMAGE.
     30  *
     31  *	@(#)if_ether.h	8.1 (Berkeley) 6/10/93
     32  */
     33 
     34 #ifndef _NET_IF_ETHER_H_
     35 #define _NET_IF_ETHER_H_
     36 
     37 #ifdef _KERNEL
     38 #ifdef _KERNEL_OPT
     39 #include "opt_mbuftrace.h"
     40 #endif
     41 #include <sys/mbuf.h>
     42 #endif
     43 
     44 #ifndef _STANDALONE
     45 #include <net/if.h>
     46 #endif
     47 
     48 /*
     49  * Some basic Ethernet constants.
     50  */
     51 #define	ETHER_ADDR_LEN	6	/* length of an Ethernet address */
     52 #define	ETHER_TYPE_LEN	2	/* length of the Ethernet type field */
     53 #define	ETHER_CRC_LEN	4	/* length of the Ethernet CRC */
     54 #define	ETHER_HDR_LEN	((ETHER_ADDR_LEN * 2) + ETHER_TYPE_LEN)
     55 #define	ETHER_MIN_LEN	64	/* minimum frame length, including CRC */
     56 #define	ETHER_MAX_LEN	1518	/* maximum frame length, including CRC */
     57 #define	ETHER_MAX_LEN_JUMBO 9018 /* maximum jumbo frame len, including CRC */
     58 
     59 /*
     60  * Some Ethernet extensions.
     61  */
     62 #define	ETHER_VLAN_ENCAP_LEN 4	/* length of 802.1Q VLAN encapsulation */
     63 #define	ETHER_PPPOE_ENCAP_LEN 8	/* length of PPPoE encapsulation */
     64 
     65 /*
     66  * Ethernet address - 6 octets
     67  * this is only used by the ethers(3) functions.
     68  */
     69 struct ether_addr {
     70 	uint8_t ether_addr_octet[ETHER_ADDR_LEN];
     71 } __packed;
     72 
     73 /*
     74  * Structure of a 10Mb/s Ethernet header.
     75  */
     76 struct ether_header {
     77 	uint8_t  ether_dhost[ETHER_ADDR_LEN];
     78 	uint8_t  ether_shost[ETHER_ADDR_LEN];
     79 	uint16_t ether_type;
     80 } __packed;
     81 
     82 #include <net/ethertypes.h>
     83 
     84 #define	ETHER_IS_MULTICAST(addr) (*(addr) & 0x01) /* is address mcast/bcast? */
     85 #define	ETHER_IS_LOCAL(addr) (*(addr) & 0x02) /* is address local? */
     86 
     87 #define	ETHERMTU_JUMBO	(ETHER_MAX_LEN_JUMBO - ETHER_HDR_LEN - ETHER_CRC_LEN)
     88 #define	ETHERMTU	(ETHER_MAX_LEN - ETHER_HDR_LEN - ETHER_CRC_LEN)
     89 #define	ETHERMIN	(ETHER_MIN_LEN - ETHER_HDR_LEN - ETHER_CRC_LEN)
     90 
     91 /*
     92  * Compute the maximum frame size based on ethertype (i.e. possible
     93  * encapsulation) and whether or not an FCS is present.
     94  */
     95 #define	ETHER_MAX_FRAME(ifp, etype, hasfcs)				\
     96 	((ifp)->if_mtu + ETHER_HDR_LEN +				\
     97 	 ((hasfcs) ? ETHER_CRC_LEN : 0) +				\
     98 	 (((etype) == ETHERTYPE_VLAN) ? ETHER_VLAN_ENCAP_LEN : 0) +	\
     99 	 (((etype) == ETHERTYPE_PPPOE) ? ETHER_PPPOE_ENCAP_LEN : 0))
    100 
    101 /*
    102  * Ethernet CRC32 polynomials (big- and little-endian verions).
    103  */
    104 #define	ETHER_CRC_POLY_LE	0xedb88320
    105 #define	ETHER_CRC_POLY_BE	0x04c11db6
    106 
    107 #ifndef _STANDALONE
    108 
    109 /*
    110  * Ethernet-specific mbuf flags.
    111  */
    112 #define	M_HASFCS	M_LINK0	/* FCS included at end of frame */
    113 #define	M_PROMISC	M_LINK1	/* this packet is not for us */
    114 
    115 #ifdef _KERNEL
    116 /*
    117  * Macro to map an IP multicast address to an Ethernet multicast address.
    118  * The high-order 25 bits of the Ethernet address are statically assigned,
    119  * and the low-order 23 bits are taken from the low end of the IP address.
    120  */
    121 #define ETHER_MAP_IP_MULTICAST(ipaddr, enaddr)				\
    122 	/* const struct in_addr *ipaddr; */				\
    123 	/* uint8_t enaddr[ETHER_ADDR_LEN]; */				\
    124 do {									\
    125 	(enaddr)[0] = 0x01;						\
    126 	(enaddr)[1] = 0x00;						\
    127 	(enaddr)[2] = 0x5e;						\
    128 	(enaddr)[3] = ((const uint8_t *)ipaddr)[1] & 0x7f;		\
    129 	(enaddr)[4] = ((const uint8_t *)ipaddr)[2];			\
    130 	(enaddr)[5] = ((const uint8_t *)ipaddr)[3];			\
    131 } while (/*CONSTCOND*/0)
    132 /*
    133  * Macro to map an IP6 multicast address to an Ethernet multicast address.
    134  * The high-order 16 bits of the Ethernet address are statically assigned,
    135  * and the low-order 32 bits are taken from the low end of the IP6 address.
    136  */
    137 #define ETHER_MAP_IPV6_MULTICAST(ip6addr, enaddr)			\
    138 	/* struct in6_addr *ip6addr; */					\
    139 	/* uint8_t enaddr[ETHER_ADDR_LEN]; */				\
    140 {                                                                       \
    141 	(enaddr)[0] = 0x33;						\
    142 	(enaddr)[1] = 0x33;						\
    143 	(enaddr)[2] = ((const uint8_t *)ip6addr)[12];			\
    144 	(enaddr)[3] = ((const uint8_t *)ip6addr)[13];			\
    145 	(enaddr)[4] = ((const uint8_t *)ip6addr)[14];			\
    146 	(enaddr)[5] = ((const uint8_t *)ip6addr)[15];			\
    147 }
    148 #endif
    149 
    150 struct mii_data;
    151 
    152 struct ethercom;
    153 
    154 typedef int (*ether_cb_t)(struct ethercom *);
    155 
    156 /*
    157  * Structure shared between the ethernet driver modules and
    158  * the multicast list code.  For example, each ec_softc or il_softc
    159  * begins with this structure.
    160  */
    161 struct ethercom {
    162 	struct	ifnet ec_if;			/* network-visible interface */
    163 	LIST_HEAD(, ether_multi) ec_multiaddrs;	/* list of ether multicast
    164 						   addrs */
    165 	int	ec_multicnt;			/* length of ec_multiaddrs
    166 						   list */
    167 	int	ec_capabilities;		/* capabilities, provided by
    168 						   driver */
    169 	int	ec_capenable;			/* tells hardware which
    170 						   capabilities to enable */
    171 
    172 	int	ec_nvlans;			/* # VLANs on this interface */
    173 	/* The device handle for the MII bus child device. */
    174 	struct mii_data				*ec_mii;
    175 	/* Called after a change to ec_if.if_flags.  Returns
    176 	 * ENETRESET if the device should be reinitialized with
    177 	 * ec_if.if_init, 0 on success, not 0 on failure.
    178 	 */
    179 	ether_cb_t				ec_ifflags_cb;
    180 #ifdef MBUFTRACE
    181 	struct	mowner ec_rx_mowner;		/* mbufs received */
    182 	struct	mowner ec_tx_mowner;		/* mbufs transmitted */
    183 #endif
    184 };
    185 
    186 #define	ETHERCAP_VLAN_MTU	0x00000001	/* VLAN-compatible MTU */
    187 #define	ETHERCAP_VLAN_HWTAGGING	0x00000002	/* hardware VLAN tag support */
    188 #define	ETHERCAP_JUMBO_MTU	0x00000004	/* 9000 byte MTU supported */
    189 #define	ETHERCAP_MASK		0x00000007
    190 
    191 #define	ECCAPBITS		\
    192 	"\020"			\
    193 	"\1VLAN_MTU"		\
    194 	"\2VLAN_HWTAGGING"	\
    195 	"\3JUMBO_MTU"
    196 
    197 /* ioctl() for Ethernet capabilities */
    198 struct eccapreq {
    199 	char		eccr_name[IFNAMSIZ];	/* if name, e.g. "en0" */
    200 	int		eccr_capabilities;	/* supported capabiliites */
    201 	int		eccr_capenable;		/* capabilities enabled */
    202 };
    203 
    204 #ifdef	_KERNEL
    205 extern const uint8_t etherbroadcastaddr[ETHER_ADDR_LEN];
    206 extern const uint8_t ethermulticastaddr_slowprotocols[ETHER_ADDR_LEN];
    207 extern const uint8_t ether_ipmulticast_min[ETHER_ADDR_LEN];
    208 extern const uint8_t ether_ipmulticast_max[ETHER_ADDR_LEN];
    209 
    210 void	ether_set_ifflags_cb(struct ethercom *, ether_cb_t);
    211 int	ether_ioctl(struct ifnet *, u_long, void *);
    212 int	ether_addmulti(const struct sockaddr *, struct ethercom *);
    213 int	ether_delmulti(const struct sockaddr *, struct ethercom *);
    214 int	ether_multiaddr(const struct sockaddr *, uint8_t[], uint8_t[]);
    215 void    ether_input(struct ifnet *, struct mbuf *);
    216 #endif /* _KERNEL */
    217 
    218 /*
    219  * Ethernet multicast address structure.  There is one of these for each
    220  * multicast address or range of multicast addresses that we are supposed
    221  * to listen to on a particular interface.  They are kept in a linked list,
    222  * rooted in the interface's ethercom structure.
    223  */
    224 struct ether_multi {
    225 	uint8_t enm_addrlo[ETHER_ADDR_LEN]; /* low  or only address of range */
    226 	uint8_t enm_addrhi[ETHER_ADDR_LEN]; /* high or only address of range */
    227 	u_int	 enm_refcount;		/* no. claims to this addr/range */
    228 	LIST_ENTRY(ether_multi) enm_list;
    229 };
    230 
    231 struct ether_multi_sysctl {
    232 	u_int   enm_refcount;
    233 	uint8_t enm_addrlo[ETHER_ADDR_LEN];
    234 	uint8_t enm_addrhi[ETHER_ADDR_LEN];
    235 };
    236 
    237 /*
    238  * Structure used by macros below to remember position when stepping through
    239  * all of the ether_multi records.
    240  */
    241 struct ether_multistep {
    242 	struct ether_multi  *e_enm;
    243 };
    244 
    245 /*
    246  * Macro for looking up the ether_multi record for a given range of Ethernet
    247  * multicast addresses connected to a given ethercom structure.  If no matching
    248  * record is found, "enm" returns NULL.
    249  */
    250 #define ETHER_LOOKUP_MULTI(addrlo, addrhi, ec, enm)			\
    251 	/* uint8_t addrlo[ETHER_ADDR_LEN]; */				\
    252 	/* uint8_t addrhi[ETHER_ADDR_LEN]; */				\
    253 	/* struct ethercom *ec; */					\
    254 	/* struct ether_multi *enm; */					\
    255 {									\
    256 	for ((enm) = LIST_FIRST(&(ec)->ec_multiaddrs);			\
    257 	    (enm) != NULL &&						\
    258 	    (memcmp((enm)->enm_addrlo, (addrlo), ETHER_ADDR_LEN) != 0 ||	\
    259 	     memcmp((enm)->enm_addrhi, (addrhi), ETHER_ADDR_LEN) != 0);	\
    260 		(enm) = LIST_NEXT((enm), enm_list));			\
    261 }
    262 
    263 /*
    264  * Macro to step through all of the ether_multi records, one at a time.
    265  * The current position is remembered in "step", which the caller must
    266  * provide.  ETHER_FIRST_MULTI(), below, must be called to initialize "step"
    267  * and get the first record.  Both macros return a NULL "enm" when there
    268  * are no remaining records.
    269  */
    270 #define ETHER_NEXT_MULTI(step, enm) \
    271 	/* struct ether_multistep step; */  \
    272 	/* struct ether_multi *enm; */  \
    273 { \
    274 	if (((enm) = (step).e_enm) != NULL) \
    275 		(step).e_enm = LIST_NEXT((enm), enm_list); \
    276 }
    277 
    278 #define ETHER_FIRST_MULTI(step, ec, enm) \
    279 	/* struct ether_multistep step; */ \
    280 	/* struct ethercom *ec; */ \
    281 	/* struct ether_multi *enm; */ \
    282 { \
    283 	(step).e_enm = LIST_FIRST(&(ec)->ec_multiaddrs); \
    284 	ETHER_NEXT_MULTI((step), (enm)); \
    285 }
    286 
    287 #ifdef _KERNEL
    288 
    289 /*
    290  * Ethernet 802.1Q VLAN structures.
    291  */
    292 
    293 /* add VLAN tag to input/received packet */
    294 static inline int vlan_input_tag(struct ifnet *, struct mbuf *, u_int);
    295 static inline int
    296 vlan_input_tag(struct ifnet *ifp, struct mbuf *m, u_int vlanid)
    297 {
    298 	struct m_tag *mtag;
    299 	mtag = m_tag_get(PACKET_TAG_VLAN, sizeof(u_int), M_NOWAIT);
    300 	if (mtag == NULL) {
    301 		ifp->if_ierrors++;
    302 		printf("%s: unable to allocate VLAN tag\n", ifp->if_xname);
    303 		m_freem(m);
    304 		return 1;
    305 	}
    306 	*(u_int *)(mtag + 1) = vlanid;
    307 	m_tag_prepend(m, mtag);
    308 	return 0;
    309 }
    310 
    311 #define VLAN_INPUT_TAG(ifp, m, vlanid, _errcase)		\
    312     if (vlan_input_tag(ifp, m, vlanid) != 0) {	 		\
    313 	_errcase;						\
    314     }
    315 
    316 /* extract VLAN tag from output/trasmit packet */
    317 #define VLAN_OUTPUT_TAG(ec, m0)			\
    318 	(VLAN_ATTACHED(ec) ? m_tag_find((m0), PACKET_TAG_VLAN, NULL) : NULL)
    319 
    320 /* extract VLAN ID value from a VLAN tag */
    321 #define VLAN_TAG_VALUE(mtag)	\
    322 	((*(u_int *)(mtag + 1)) & 4095)
    323 
    324 /* test if any VLAN is configured for this interface */
    325 #define VLAN_ATTACHED(ec)	((ec)->ec_nvlans > 0)
    326 
    327 void	etherinit(void);
    328 void	ether_ifattach(struct ifnet *, const uint8_t *);
    329 void	ether_ifdetach(struct ifnet *);
    330 int	ether_mediachange(struct ifnet *);
    331 void	ether_mediastatus(struct ifnet *, struct ifmediareq *);
    332 
    333 char	*ether_sprintf(const uint8_t *);
    334 char	*ether_snprintf(char *, size_t, const uint8_t *);
    335 
    336 uint32_t ether_crc32_le(const uint8_t *, size_t);
    337 uint32_t ether_crc32_be(const uint8_t *, size_t);
    338 
    339 int	ether_aton_r(u_char *, size_t, const char *);
    340 int	ether_enable_vlan_mtu(struct ifnet *);
    341 int	ether_disable_vlan_mtu(struct ifnet *);
    342 #else
    343 /*
    344  * Prototype ethers(3) functions.
    345  */
    346 #include <sys/cdefs.h>
    347 __BEGIN_DECLS
    348 char *	ether_ntoa(const struct ether_addr *);
    349 struct ether_addr *
    350 	ether_aton(const char *);
    351 int	ether_ntohost(char *, const struct ether_addr *);
    352 int	ether_hostton(const char *, struct ether_addr *);
    353 int	ether_line(const char *, struct ether_addr *, char *);
    354 __END_DECLS
    355 #endif
    356 
    357 #endif /* _STANDALONE */
    358 
    359 #endif /* !_NET_IF_ETHER_H_ */
    360