Home | History | Annotate | Line # | Download | only in net
if_ether.h revision 1.82
      1 /*	$NetBSD: if_ether.h,v 1.82 2021/02/03 05:51:40 roy Exp $	*/
      2 
      3 /*
      4  * Copyright (c) 1982, 1986, 1993
      5  *	The Regents of the University of California.  All rights reserved.
      6  *
      7  * Redistribution and use in source and binary forms, with or without
      8  * modification, are permitted provided that the following conditions
      9  * are met:
     10  * 1. Redistributions of source code must retain the above copyright
     11  *    notice, this list of conditions and the following disclaimer.
     12  * 2. Redistributions in binary form must reproduce the above copyright
     13  *    notice, this list of conditions and the following disclaimer in the
     14  *    documentation and/or other materials provided with the distribution.
     15  * 3. Neither the name of the University nor the names of its contributors
     16  *    may be used to endorse or promote products derived from this software
     17  *    without specific prior written permission.
     18  *
     19  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
     20  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     21  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     22  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
     23  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     24  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     25  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     26  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     27  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     28  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     29  * SUCH DAMAGE.
     30  *
     31  *	@(#)if_ether.h	8.1 (Berkeley) 6/10/93
     32  */
     33 
     34 #ifndef _NET_IF_ETHER_H_
     35 #define _NET_IF_ETHER_H_
     36 
     37 #ifdef _KERNEL
     38 #ifdef _KERNEL_OPT
     39 #include "opt_mbuftrace.h"
     40 #endif
     41 #include <sys/mbuf.h>
     42 #endif
     43 
     44 #ifndef _STANDALONE
     45 #include <net/if.h>
     46 #endif
     47 
     48 /*
     49  * Some basic Ethernet constants.
     50  */
     51 #define	ETHER_ADDR_LEN	6	/* length of an Ethernet address */
     52 #define	ETHER_TYPE_LEN	2	/* length of the Ethernet type field */
     53 #define	ETHER_CRC_LEN	4	/* length of the Ethernet CRC */
     54 #define	ETHER_HDR_LEN	((ETHER_ADDR_LEN * 2) + ETHER_TYPE_LEN)
     55 #define	ETHER_MIN_LEN	64	/* minimum frame length, including CRC */
     56 #define	ETHER_MAX_LEN	1518	/* maximum frame length, including CRC */
     57 #define	ETHER_MAX_LEN_JUMBO 9018 /* maximum jumbo frame len, including CRC */
     58 
     59 /*
     60  * Some Ethernet extensions.
     61  */
     62 #define	ETHER_VLAN_ENCAP_LEN	4     /* length of 802.1Q VLAN encapsulation */
     63 #define	EVL_VLANOFTAG(tag)	((tag) & 4095)		/* VLAN ID */
     64 #define	EVL_PRIOFTAG(tag)	(((tag) >> 13) & 7)	/* Priority */
     65 #define	EVL_CFIOFTAG(tag)	(((tag) >> 12) & 1)	/* CFI */
     66 #define	ETHER_PPPOE_ENCAP_LEN	8	/* length of PPPoE encapsulation */
     67 
     68 /*
     69  * Mbuf adjust factor to force 32-bit alignment of IP header.
     70  * Drivers should do m_adj(m, ETHER_ALIGN) when setting up a
     71  * receive so the upper layers get the IP header properly aligned
     72  * past the 14-byte Ethernet header.
     73  */
     74 #define	ETHER_ALIGN	2	/* driver adjust for IP hdr alignment */
     75 
     76 /*
     77  * Ethernet address - 6 octets
     78  * this is only used by the ethers(3) functions.
     79  */
     80 struct ether_addr {
     81 	uint8_t ether_addr_octet[ETHER_ADDR_LEN];
     82 };
     83 
     84 /*
     85  * Structure of a 10Mb/s Ethernet header.
     86  */
     87 struct ether_header {
     88 	uint8_t  ether_dhost[ETHER_ADDR_LEN];
     89 	uint8_t  ether_shost[ETHER_ADDR_LEN];
     90 	uint16_t ether_type;
     91 };
     92 
     93 #include <net/ethertypes.h>
     94 
     95 #define	ETHER_IS_MULTICAST(addr) (*(addr) & 0x01) /* is address mcast/bcast? */
     96 #define	ETHER_IS_LOCAL(addr) (*(addr) & 0x02) /* is address local? */
     97 
     98 #define	ETHERMTU_JUMBO	(ETHER_MAX_LEN_JUMBO - ETHER_HDR_LEN - ETHER_CRC_LEN)
     99 #define	ETHERMTU	(ETHER_MAX_LEN - ETHER_HDR_LEN - ETHER_CRC_LEN)
    100 #define	ETHERMIN	(ETHER_MIN_LEN - ETHER_HDR_LEN - ETHER_CRC_LEN)
    101 
    102 /*
    103  * Compute the maximum frame size based on ethertype (i.e. possible
    104  * encapsulation) and whether or not an FCS is present.
    105  */
    106 #define	ETHER_MAX_FRAME(ifp, etype, hasfcs)				\
    107 	((ifp)->if_mtu + ETHER_HDR_LEN +				\
    108 	 ((hasfcs) ? ETHER_CRC_LEN : 0) +				\
    109 	 (((etype) == ETHERTYPE_VLAN) ? ETHER_VLAN_ENCAP_LEN : 0) +	\
    110 	 (((etype) == ETHERTYPE_PPPOE) ? ETHER_PPPOE_ENCAP_LEN : 0))
    111 
    112 /*
    113  * Ethernet CRC32 polynomials (big- and little-endian verions).
    114  */
    115 #define	ETHER_CRC_POLY_LE	0xedb88320
    116 #define	ETHER_CRC_POLY_BE	0x04c11db6
    117 
    118 #ifndef _STANDALONE
    119 
    120 /*
    121  * Ethernet-specific mbuf flags.
    122  */
    123 #define	M_HASFCS	M_LINK0	/* FCS included at end of frame */
    124 #define	M_PROMISC	M_LINK1	/* this packet is not for us */
    125 
    126 #ifdef _KERNEL
    127 /*
    128  * Macro to map an IP multicast address to an Ethernet multicast address.
    129  * The high-order 25 bits of the Ethernet address are statically assigned,
    130  * and the low-order 23 bits are taken from the low end of the IP address.
    131  */
    132 #define ETHER_MAP_IP_MULTICAST(ipaddr, enaddr)				\
    133 	/* const struct in_addr *ipaddr; */				\
    134 	/* uint8_t enaddr[ETHER_ADDR_LEN]; */				\
    135 do {									\
    136 	(enaddr)[0] = 0x01;						\
    137 	(enaddr)[1] = 0x00;						\
    138 	(enaddr)[2] = 0x5e;						\
    139 	(enaddr)[3] = ((const uint8_t *)ipaddr)[1] & 0x7f;		\
    140 	(enaddr)[4] = ((const uint8_t *)ipaddr)[2];			\
    141 	(enaddr)[5] = ((const uint8_t *)ipaddr)[3];			\
    142 } while (/*CONSTCOND*/0)
    143 /*
    144  * Macro to map an IP6 multicast address to an Ethernet multicast address.
    145  * The high-order 16 bits of the Ethernet address are statically assigned,
    146  * and the low-order 32 bits are taken from the low end of the IP6 address.
    147  */
    148 #define ETHER_MAP_IPV6_MULTICAST(ip6addr, enaddr)			\
    149 	/* struct in6_addr *ip6addr; */					\
    150 	/* uint8_t enaddr[ETHER_ADDR_LEN]; */				\
    151 {                                                                       \
    152 	(enaddr)[0] = 0x33;						\
    153 	(enaddr)[1] = 0x33;						\
    154 	(enaddr)[2] = ((const uint8_t *)ip6addr)[12];			\
    155 	(enaddr)[3] = ((const uint8_t *)ip6addr)[13];			\
    156 	(enaddr)[4] = ((const uint8_t *)ip6addr)[14];			\
    157 	(enaddr)[5] = ((const uint8_t *)ip6addr)[15];			\
    158 }
    159 #endif
    160 
    161 struct mii_data;
    162 
    163 struct ethercom;
    164 
    165 typedef int (*ether_cb_t)(struct ethercom *);
    166 typedef int (*ether_vlancb_t)(struct ethercom *, uint16_t, bool);
    167 
    168 /*
    169  * Structure shared between the ethernet driver modules and
    170  * the multicast list code.  For example, each ec_softc or il_softc
    171  * begins with this structure.
    172  */
    173 struct ethercom {
    174 	struct	ifnet ec_if;			/* network-visible interface */
    175 	LIST_HEAD(, ether_multi) ec_multiaddrs;	/* list of ether multicast
    176 						   addrs */
    177 	int	ec_multicnt;			/* length of ec_multiaddrs
    178 						   list */
    179 	int	ec_capabilities;		/* capabilities, provided by
    180 						   driver */
    181 	int	ec_capenable;			/* tells hardware which
    182 						   capabilities to enable */
    183 
    184 	int	ec_nvlans;			/* # VLANs on this interface */
    185 	SIMPLEQ_HEAD(, vlanid_list) ec_vids;	/* list of VLAN IDs */
    186 	/* The device handle for the MII bus child device. */
    187 	struct mii_data				*ec_mii;
    188 	struct ifmedia				*ec_ifmedia;
    189 	/*
    190 	 * Called after a change to ec_if.if_flags.  Returns
    191 	 * ENETRESET if the device should be reinitialized with
    192 	 * ec_if.if_init, 0 on success, not 0 on failure.
    193 	 */
    194 	ether_cb_t				ec_ifflags_cb;
    195 	/*
    196 	 * Called whenever a vlan interface is configured or unconfigured.
    197 	 * Args include the vlan tag and a flag indicating whether the tag is
    198 	 * being added or removed.
    199 	 */
    200 	ether_vlancb_t				ec_vlan_cb;
    201 	kmutex_t				*ec_lock;
    202 	/* Flags used only by the kernel */
    203 	int					ec_flags;
    204 #ifdef MBUFTRACE
    205 	struct	mowner ec_rx_mowner;		/* mbufs received */
    206 	struct	mowner ec_tx_mowner;		/* mbufs transmitted */
    207 #endif
    208 };
    209 
    210 #define	ETHERCAP_VLAN_MTU	0x00000001 /* VLAN-compatible MTU */
    211 #define	ETHERCAP_VLAN_HWTAGGING	0x00000002 /* hardware VLAN tag support */
    212 #define	ETHERCAP_JUMBO_MTU	0x00000004 /* 9000 byte MTU supported */
    213 #define	ETHERCAP_VLAN_HWFILTER	0x00000008 /* iface hw can filter vlan tag */
    214 #define	ETHERCAP_EEE		0x00000010 /* Energy Efficiency Ethernet */
    215 #define	ETHERCAP_MASK		0x0000001f
    216 
    217 #define	ECCAPBITS		\
    218 	"\020"			\
    219 	"\1VLAN_MTU"		\
    220 	"\2VLAN_HWTAGGING"	\
    221 	"\3JUMBO_MTU"		\
    222 	"\4VLAN_HWFILTER"	\
    223 	"\5EEE"
    224 
    225 /* ioctl() for Ethernet capabilities */
    226 struct eccapreq {
    227 	char		eccr_name[IFNAMSIZ];	/* if name, e.g. "en0" */
    228 	int		eccr_capabilities;	/* supported capabiliites */
    229 	int		eccr_capenable;		/* capabilities enabled */
    230 };
    231 
    232 /* sysctl for Ethernet multicast addresses */
    233 struct ether_multi_sysctl {
    234 	u_int   enm_refcount;
    235 	uint8_t enm_addrlo[ETHER_ADDR_LEN];
    236 	uint8_t enm_addrhi[ETHER_ADDR_LEN];
    237 };
    238 
    239 #ifdef	_KERNEL
    240 /*
    241  * Flags for ec_flags
    242  */
    243 /* Store IFF_ALLMULTI in ec_flags instead of if_flags to avoid data races. */
    244 #define ETHER_F_ALLMULTI	__BIT(0)
    245 
    246 extern const uint8_t etherbroadcastaddr[ETHER_ADDR_LEN];
    247 extern const uint8_t ethermulticastaddr_slowprotocols[ETHER_ADDR_LEN];
    248 extern const uint8_t ether_ipmulticast_min[ETHER_ADDR_LEN];
    249 extern const uint8_t ether_ipmulticast_max[ETHER_ADDR_LEN];
    250 
    251 void	ether_set_ifflags_cb(struct ethercom *, ether_cb_t);
    252 void	ether_set_vlan_cb(struct ethercom *, ether_vlancb_t);
    253 int	ether_ioctl(struct ifnet *, u_long, void *);
    254 int	ether_addmulti(const struct sockaddr *, struct ethercom *);
    255 int	ether_delmulti(const struct sockaddr *, struct ethercom *);
    256 int	ether_multiaddr(const struct sockaddr *, uint8_t[], uint8_t[]);
    257 void    ether_input(struct ifnet *, struct mbuf *);
    258 
    259 /*
    260  * Ethernet multicast address structure.  There is one of these for each
    261  * multicast address or range of multicast addresses that we are supposed
    262  * to listen to on a particular interface.  They are kept in a linked list,
    263  * rooted in the interface's ethercom structure.
    264  */
    265 struct ether_multi {
    266 	uint8_t enm_addrlo[ETHER_ADDR_LEN]; /* low  or only address of range */
    267 	uint8_t enm_addrhi[ETHER_ADDR_LEN]; /* high or only address of range */
    268 	u_int	enm_refcount;		/* no. claims to this addr/range */
    269 	LIST_ENTRY(ether_multi) enm_list;
    270 };
    271 
    272 /*
    273  * Structure used by macros below to remember position when stepping through
    274  * all of the ether_multi records.
    275  */
    276 struct ether_multistep {
    277 	struct ether_multi  *e_enm;
    278 };
    279 
    280 /*
    281  * lookup the ether_multi record for a given range of Ethernet
    282  * multicast addresses connected to a given ethercom structure.
    283  * If no matching record is found, NULL is returned.
    284  */
    285 static __inline struct ether_multi *
    286 ether_lookup_multi(const uint8_t *addrlo, const uint8_t *addrhi,
    287     const struct ethercom *ec)
    288 {
    289 	struct ether_multi *enm;
    290 
    291 	LIST_FOREACH(enm, &ec->ec_multiaddrs, enm_list) {
    292 		if (memcmp(enm->enm_addrlo, addrlo, ETHER_ADDR_LEN) != 0)
    293 			continue;
    294 		if (memcmp(enm->enm_addrhi, addrhi, ETHER_ADDR_LEN) != 0)
    295 			continue;
    296 
    297 		break;
    298 	}
    299 
    300 	return enm;
    301 }
    302 
    303 /*
    304  * step through all of the ether_multi records, one at a time.
    305  * The current position is remembered in "step", which the caller must
    306  * provide.  ether_first_multi(), below, must be called to initialize "step"
    307  * and get the first record.  Both functions return a NULL when there
    308  * are no remaining records.
    309  */
    310 static __inline struct ether_multi *
    311 ether_next_multi(struct ether_multistep *step)
    312 {
    313 	struct ether_multi *enm;
    314 
    315 	enm = step->e_enm;
    316 	if (enm != NULL)
    317 		step->e_enm = LIST_NEXT(enm, enm_list);
    318 
    319 	return enm;
    320 }
    321 #define ETHER_NEXT_MULTI(step, enm)		\
    322 	/* struct ether_multistep step; */	\
    323 	/* struct ether_multi *enm; */		\
    324 	(enm) = ether_next_multi(&(step))
    325 
    326 static __inline struct ether_multi *
    327 ether_first_multi(struct ether_multistep *step, const struct ethercom *ec)
    328 {
    329 
    330 	step->e_enm = LIST_FIRST(&ec->ec_multiaddrs);
    331 
    332 	return ether_next_multi(step);
    333 }
    334 
    335 #define ETHER_FIRST_MULTI(step, ec, enm)		\
    336 	/* struct ether_multistep step; */		\
    337 	/* struct ethercom *ec; */			\
    338 	/* struct ether_multi *enm; */			\
    339 	(enm) = ether_first_multi(&(step), (ec))
    340 
    341 #define ETHER_LOCK(ec)		mutex_enter((ec)->ec_lock)
    342 #define ETHER_UNLOCK(ec)	mutex_exit((ec)->ec_lock)
    343 
    344 /*
    345  * Ethernet 802.1Q VLAN structures.
    346  */
    347 
    348 /* for ethercom */
    349 struct vlanid_list {
    350 	uint16_t vid;
    351 	SIMPLEQ_ENTRY(vlanid_list) vid_list;
    352 };
    353 
    354 /* add VLAN tag to input/received packet */
    355 static __inline void
    356 vlan_set_tag(struct mbuf *m, uint16_t vlantag)
    357 {
    358 	/* VLAN tag contains priority, CFI and VLAN ID */
    359 	KASSERT((m->m_flags & M_PKTHDR) != 0);
    360 	m->m_pkthdr.ether_vtag = vlantag;
    361 	m->m_flags |= M_VLANTAG;
    362 	return;
    363 }
    364 
    365 static __inline bool
    366 vlan_has_tag(struct mbuf *m)
    367 {
    368 	return (m->m_flags & M_VLANTAG) != 0;
    369 }
    370 
    371 /* extract VLAN ID value from a VLAN tag */
    372 static __inline uint16_t
    373 vlan_get_tag(struct mbuf *m)
    374 {
    375 	KASSERT((m->m_flags & M_PKTHDR) != 0);
    376 	KASSERT(m->m_flags & M_VLANTAG);
    377 	return m->m_pkthdr.ether_vtag;
    378 }
    379 
    380 /* test if any VLAN is configured for this interface */
    381 #define VLAN_ATTACHED(ec)	((ec)->ec_nvlans > 0)
    382 
    383 void	etherinit(void);
    384 void	ether_ifattach(struct ifnet *, const uint8_t *);
    385 void	ether_ifdetach(struct ifnet *);
    386 int	ether_mediachange(struct ifnet *);
    387 void	ether_mediastatus(struct ifnet *, struct ifmediareq *);
    388 
    389 char	*ether_sprintf(const uint8_t *);
    390 char	*ether_snprintf(char *, size_t, const uint8_t *);
    391 
    392 uint32_t ether_crc32_le(const uint8_t *, size_t);
    393 uint32_t ether_crc32_be(const uint8_t *, size_t);
    394 
    395 int	ether_aton_r(u_char *, size_t, const char *);
    396 int	ether_enable_vlan_mtu(struct ifnet *);
    397 int	ether_disable_vlan_mtu(struct ifnet *);
    398 #else
    399 /*
    400  * Prototype ethers(3) functions.
    401  */
    402 #include <sys/cdefs.h>
    403 __BEGIN_DECLS
    404 char *	ether_ntoa(const struct ether_addr *);
    405 struct ether_addr *
    406 	ether_aton(const char *);
    407 int	ether_ntohost(char *, const struct ether_addr *);
    408 int	ether_hostton(const char *, struct ether_addr *);
    409 int	ether_line(const char *, struct ether_addr *, char *);
    410 __END_DECLS
    411 #endif
    412 
    413 #endif /* _STANDALONE */
    414 
    415 #endif /* !_NET_IF_ETHER_H_ */
    416