Home | History | Annotate | Line # | Download | only in net
if_sl.c revision 1.124
      1 /*	$NetBSD: if_sl.c,v 1.124 2016/06/10 13:27:16 ozaki-r Exp $	*/
      2 
      3 /*
      4  * Copyright (c) 1987, 1989, 1992, 1993
      5  *	The Regents of the University of California.  All rights reserved.
      6  *
      7  * Redistribution and use in source and binary forms, with or without
      8  * modification, are permitted provided that the following conditions
      9  * are met:
     10  * 1. Redistributions of source code must retain the above copyright
     11  *    notice, this list of conditions and the following disclaimer.
     12  * 2. Redistributions in binary form must reproduce the above copyright
     13  *    notice, this list of conditions and the following disclaimer in the
     14  *    documentation and/or other materials provided with the distribution.
     15  * 3. Neither the name of the University nor the names of its contributors
     16  *    may be used to endorse or promote products derived from this software
     17  *    without specific prior written permission.
     18  *
     19  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
     20  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     21  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     22  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
     23  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     24  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     25  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     26  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     27  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     28  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     29  * SUCH DAMAGE.
     30  *
     31  *	@(#)if_sl.c	8.9 (Berkeley) 1/9/95
     32  */
     33 
     34 /*
     35  * Serial Line interface
     36  *
     37  * Rick Adams
     38  * Center for Seismic Studies
     39  * 1300 N 17th Street, Suite 1450
     40  * Arlington, Virginia 22209
     41  * (703)276-7900
     42  * rick (at) seismo.ARPA
     43  * seismo!rick
     44  *
     45  * Pounded on heavily by Chris Torek (chris (at) mimsy.umd.edu, umcp-cs!chris).
     46  * N.B.: this belongs in netinet, not net, the way it stands now.
     47  * Should have a link-layer type designation, but wouldn't be
     48  * backwards-compatible.
     49  *
     50  * Converted to 4.3BSD Beta by Chris Torek.
     51  * Other changes made at Berkeley, based in part on code by Kirk Smith.
     52  * W. Jolitz added slip abort.
     53  *
     54  * Hacked almost beyond recognition by Van Jacobson (van (at) helios.ee.lbl.gov).
     55  * Added priority queuing for "interactive" traffic; hooks for TCP
     56  * header compression; ICMP filtering (at 2400 baud, some cretin
     57  * pinging you can use up all your bandwidth).  Made low clist behavior
     58  * more robust and slightly less likely to hang serial line.
     59  * Sped up a bunch of things.
     60  */
     61 
     62 #include <sys/cdefs.h>
     63 __KERNEL_RCSID(0, "$NetBSD: if_sl.c,v 1.124 2016/06/10 13:27:16 ozaki-r Exp $");
     64 
     65 #ifdef _KERNEL_OPT
     66 #include "opt_inet.h"
     67 #endif
     68 
     69 #include <sys/param.h>
     70 #include <sys/proc.h>
     71 #include <sys/malloc.h>
     72 #include <sys/mbuf.h>
     73 #include <sys/buf.h>
     74 #include <sys/dkstat.h>
     75 #include <sys/socket.h>
     76 #include <sys/ioctl.h>
     77 #include <sys/file.h>
     78 #include <sys/conf.h>
     79 #include <sys/tty.h>
     80 #include <sys/kernel.h>
     81 #include <sys/socketvar.h>
     82 #if __NetBSD__
     83 #include <sys/systm.h>
     84 #include <sys/kauth.h>
     85 #endif
     86 #include <sys/cpu.h>
     87 #include <sys/intr.h>
     88 
     89 #include <net/if.h>
     90 #include <net/if_types.h>
     91 #include <net/netisr.h>
     92 #include <net/route.h>
     93 
     94 #ifdef INET
     95 #include <netinet/in.h>
     96 #include <netinet/in_systm.h>
     97 #include <netinet/in_var.h>
     98 #include <netinet/ip.h>
     99 #endif
    100 
    101 #include <net/slcompress.h>
    102 #include <net/if_slvar.h>
    103 #include <net/slip.h>
    104 #include <net/ppp_defs.h>
    105 #include <net/if_ppp.h>
    106 
    107 #include <sys/time.h>
    108 #include <net/bpf.h>
    109 
    110 #include "ioconf.h"
    111 
    112 /*
    113  * SLMAX is a hard limit on input packet size.  To simplify the code
    114  * and improve performance, we require that packets fit in an mbuf
    115  * cluster, and if we get a compressed packet, there's enough extra
    116  * room to expand the header into a max length tcp/ip header (128
    117  * bytes).  So, SLMAX can be at most
    118  *	MCLBYTES - 128
    119  *
    120  * SLMTU is a hard limit on output packet size.  To insure good
    121  * interactive response, SLMTU wants to be the smallest size that
    122  * amortizes the header cost.  (Remember that even with
    123  * type-of-service queuing, we have to wait for any in-progress
    124  * packet to finish.  I.e., we wait, on the average, 1/2 * mtu /
    125  * cps, where cps is the line speed in characters per second.
    126  * E.g., 533ms wait for a 1024 byte MTU on a 9600 baud line.  The
    127  * average compressed header size is 6-8 bytes so any MTU > 90
    128  * bytes will give us 90% of the line bandwidth.  A 100ms wait is
    129  * tolerable (500ms is not), so want an MTU around 296.  (Since TCP
    130  * will send 256 byte segments (to allow for 40 byte headers), the
    131  * typical packet size on the wire will be around 260 bytes).  In
    132  * 4.3tahoe+ systems, we can set an MTU in a route so we do that &
    133  * leave the interface MTU relatively high (so we don't IP fragment
    134  * when acting as a gateway to someone using a stupid MTU).
    135  *
    136  * Similar considerations apply to SLIP_HIWAT:  It's the amount of
    137  * data that will be queued 'downstream' of us (i.e., in clists
    138  * waiting to be picked up by the tty output interrupt).  If we
    139  * queue a lot of data downstream, it's immune to our t.o.s. queuing.
    140  * E.g., if SLIP_HIWAT is 1024, the interactive traffic in mixed
    141  * telnet/ftp will see a 1 sec wait, independent of the mtu (the
    142  * wait is dependent on the ftp window size but that's typically
    143  * 1k - 4k).  So, we want SLIP_HIWAT just big enough to amortize
    144  * the cost (in idle time on the wire) of the tty driver running
    145  * off the end of its clists & having to call back slstart for a
    146  * new packet.  For a tty interface with any buffering at all, this
    147  * cost will be zero.  Even with a totally brain dead interface (like
    148  * the one on a typical workstation), the cost will be <= 1 character
    149  * time.  So, setting SLIP_HIWAT to ~100 guarantees that we'll lose
    150  * at most 1% while maintaining good interactive response.
    151  */
    152 #define	BUFOFFSET	(128+sizeof(struct ifnet **)+SLIP_HDRLEN)
    153 #define	SLMAX		(MCLBYTES - BUFOFFSET)
    154 #define	SLBUFSIZE	(SLMAX + BUFOFFSET)
    155 #ifndef SLMTU
    156 #define	SLMTU		296
    157 #endif
    158 #if (SLMTU < 3)
    159 #error SLMTU way too small.
    160 #endif
    161 #define	SLIP_HIWAT	roundup(50, TTROUND)
    162 #ifndef __NetBSD__					/* XXX - cgd */
    163 #define	CLISTRESERVE	1024	/* Can't let clists get too low */
    164 #endif	/* !__NetBSD__ */
    165 
    166 /*
    167  * SLIP ABORT ESCAPE MECHANISM:
    168  *	(inspired by HAYES modem escape arrangement)
    169  *	1sec escape 1sec escape 1sec escape { 1sec escape 1sec escape }
    170  *	within window time signals a "soft" exit from slip mode by remote end
    171  *	if the IFF_DEBUG flag is on.
    172  */
    173 #define	ABT_ESC		'\033'	/* can't be t_intr - distant host must know it*/
    174 #define	ABT_IDLE	1	/* in seconds - idle before an escape */
    175 #define	ABT_COUNT	3	/* count of escapes for abort */
    176 #define	ABT_WINDOW	(ABT_COUNT*2+2)	/* in seconds - time to count */
    177 
    178 static int		sl_clone_create(struct if_clone *, int);
    179 static int		sl_clone_destroy(struct ifnet *);
    180 
    181 static LIST_HEAD(, sl_softc) sl_softc_list;
    182 
    183 struct if_clone sl_cloner =
    184     IF_CLONE_INITIALIZER("sl", sl_clone_create, sl_clone_destroy);
    185 
    186 #define FRAME_END		0xc0		/* Frame End */
    187 #define FRAME_ESCAPE		0xdb		/* Frame Esc */
    188 #define TRANS_FRAME_END		0xdc		/* transposed frame end */
    189 #define TRANS_FRAME_ESCAPE	0xdd		/* transposed frame esc */
    190 
    191 static void	slintr(void *);
    192 
    193 static int	slinit(struct sl_softc *);
    194 static struct mbuf *sl_btom(struct sl_softc *, int);
    195 
    196 static int	slclose(struct tty *, int);
    197 static int	slinput(int, struct tty *);
    198 static int	slioctl(struct ifnet *, u_long, void *);
    199 static int	slopen(dev_t, struct tty *);
    200 static int	sloutput(struct ifnet *, struct mbuf *, const struct sockaddr *,
    201 			 const struct rtentry *);
    202 static int	slstart(struct tty *);
    203 static int	sltioctl(struct tty *, u_long, void *, int, struct lwp *);
    204 
    205 static struct linesw slip_disc = {
    206 	.l_name = "slip",
    207 	.l_open = slopen,
    208 	.l_close = slclose,
    209 	.l_read = ttyerrio,
    210 	.l_write = ttyerrio,
    211 	.l_ioctl = sltioctl,
    212 	.l_rint = slinput,
    213 	.l_start = slstart,
    214 	.l_modem = nullmodem,
    215 	.l_poll = ttyerrpoll
    216 };
    217 
    218 void
    219 slattach(int n __unused)
    220 {
    221 
    222 	if (ttyldisc_attach(&slip_disc) != 0)
    223 		panic("slattach");
    224 	LIST_INIT(&sl_softc_list);
    225 	if_clone_attach(&sl_cloner);
    226 }
    227 
    228 static int
    229 sl_clone_create(struct if_clone *ifc, int unit)
    230 {
    231 	struct sl_softc *sc;
    232 
    233 	sc = malloc(sizeof(*sc), M_DEVBUF, M_WAIT|M_ZERO);
    234 	sc->sc_unit = unit;
    235 	if_initname(&sc->sc_if, ifc->ifc_name, unit);
    236 	sc->sc_if.if_softc = sc;
    237 	sc->sc_if.if_mtu = SLMTU;
    238 	sc->sc_if.if_flags = IFF_POINTOPOINT | SC_AUTOCOMP | IFF_MULTICAST;
    239 	sc->sc_if.if_type = IFT_SLIP;
    240 	sc->sc_if.if_ioctl = slioctl;
    241 	sc->sc_if.if_output = sloutput;
    242 	sc->sc_if.if_dlt = DLT_SLIP;
    243 	sc->sc_fastq.ifq_maxlen = 32;
    244 	IFQ_SET_READY(&sc->sc_if.if_snd);
    245 	if_attach(&sc->sc_if);
    246 	if_alloc_sadl(&sc->sc_if);
    247 	bpf_attach(&sc->sc_if, DLT_SLIP, SLIP_HDRLEN);
    248 	LIST_INSERT_HEAD(&sl_softc_list, sc, sc_iflist);
    249 	return 0;
    250 }
    251 
    252 static int
    253 sl_clone_destroy(struct ifnet *ifp)
    254 {
    255 	struct sl_softc *sc = (struct sl_softc *)ifp->if_softc;
    256 
    257 	if (sc->sc_ttyp != NULL)
    258 		return EBUSY;	/* Not removing it */
    259 
    260 	LIST_REMOVE(sc, sc_iflist);
    261 
    262 	bpf_detach(ifp);
    263 	if_detach(ifp);
    264 
    265 	free(sc, M_DEVBUF);
    266 	return 0;
    267 }
    268 
    269 static int
    270 slinit(struct sl_softc *sc)
    271 {
    272 
    273 	if (sc->sc_mbuf == NULL) {
    274 		sc->sc_mbuf = m_gethdr(M_WAIT, MT_DATA);
    275 		m_clget(sc->sc_mbuf, M_WAIT);
    276 	}
    277 	sc->sc_ep = (u_char *)sc->sc_mbuf->m_ext.ext_buf +
    278 	    sc->sc_mbuf->m_ext.ext_size;
    279 	sc->sc_mp = sc->sc_pktstart = (u_char *)sc->sc_mbuf->m_ext.ext_buf +
    280 	    BUFOFFSET;
    281 
    282 #ifdef INET
    283 	sl_compress_init(&sc->sc_comp);
    284 #endif
    285 
    286 	return 1;
    287 }
    288 
    289 /*
    290  * Line specific open routine.
    291  * Attach the given tty to the first available sl unit.
    292  */
    293 /* ARGSUSED */
    294 static int
    295 slopen(dev_t dev, struct tty *tp)
    296 {
    297 	struct lwp *l = curlwp;		/* XXX */
    298 	struct sl_softc *sc;
    299 	int error;
    300 
    301 	error = kauth_authorize_network(l->l_cred, KAUTH_NETWORK_INTERFACE_SLIP,
    302 	    KAUTH_REQ_NETWORK_INTERFACE_SLIP_ADD, NULL, NULL, NULL);
    303 	if (error)
    304 		return error;
    305 
    306 	if (tp->t_linesw == &slip_disc)
    307 		return 0;
    308 
    309 	LIST_FOREACH(sc, &sl_softc_list, sc_iflist)
    310 		if (sc->sc_ttyp == NULL) {
    311 			sc->sc_si = softint_establish(SOFTINT_NET,
    312 			    slintr, sc);
    313 			if (sc->sc_si == NULL)
    314 				return ENOMEM;
    315 			if (slinit(sc) == 0) {
    316 				softint_disestablish(sc->sc_si);
    317 				return ENOBUFS;
    318 			}
    319 			tp->t_sc = (void *)sc;
    320 			sc->sc_ttyp = tp;
    321 			sc->sc_if.if_baudrate = tp->t_ospeed;
    322 			mutex_spin_enter(&tty_lock);
    323 			tp->t_state |= TS_ISOPEN | TS_XCLUDE;
    324 			ttyflush(tp, FREAD | FWRITE);
    325 			/*
    326 			 * make sure tty output queue is large enough
    327 			 * to hold a full-sized packet (including frame
    328 			 * end, and a possible extra frame end).  full-sized
    329 			 * packet occupies a max of 2*SLMAX bytes (because
    330 			 * of possible escapes), and add two on for frame
    331 			 * ends.
    332 			 */
    333 			if (tp->t_outq.c_cn < 2 * SLMAX + 2) {
    334 				sc->sc_oldbufsize = tp->t_outq.c_cn;
    335 				sc->sc_oldbufquot = tp->t_outq.c_cq != 0;
    336 
    337 				clfree(&tp->t_outq);
    338 				mutex_spin_exit(&tty_lock);
    339 				error = clalloc(&tp->t_outq, 2 * SLMAX + 2, 0);
    340 				if (error) {
    341 					softint_disestablish(sc->sc_si);
    342 					/*
    343 					 * clalloc() might return -1 which
    344 					 * is no good, so we need to return
    345 					 * something else.
    346 					 */
    347 					return ENOMEM; /* XXX ?! */
    348 				}
    349 			} else {
    350 				sc->sc_oldbufsize = sc->sc_oldbufquot = 0;
    351 				mutex_spin_exit(&tty_lock);
    352 			}
    353 			return 0;
    354 		}
    355 	return ENXIO;
    356 }
    357 
    358 /*
    359  * Line specific close routine.
    360  * Detach the tty from the sl unit.
    361  */
    362 static int
    363 slclose(struct tty *tp, int flag)
    364 {
    365 	struct sl_softc *sc;
    366 	int s;
    367 
    368 	ttywflush(tp);
    369 	sc = tp->t_sc;
    370 
    371 	if (sc != NULL) {
    372 		softint_disestablish(sc->sc_si);
    373 		s = splnet();
    374 		if_down(&sc->sc_if);
    375 		IF_PURGE(&sc->sc_fastq);
    376 		splx(s);
    377 
    378 		s = spltty();
    379 		ttyldisc_release(tp->t_linesw);
    380 		tp->t_linesw = ttyldisc_default();
    381 		tp->t_state = 0;
    382 
    383 		sc->sc_ttyp = NULL;
    384 		tp->t_sc = NULL;
    385 
    386 		m_freem(sc->sc_mbuf);
    387 		sc->sc_mbuf = NULL;
    388 		sc->sc_ep = sc->sc_mp = sc->sc_pktstart = NULL;
    389 		IF_PURGE(&sc->sc_inq);
    390 
    391 		/*
    392 		 * If necessary, install a new outq buffer of the
    393 		 * appropriate size.
    394 		 */
    395 		if (sc->sc_oldbufsize != 0) {
    396 			clfree(&tp->t_outq);
    397 			clalloc(&tp->t_outq, sc->sc_oldbufsize,
    398 			    sc->sc_oldbufquot);
    399 		}
    400 		splx(s);
    401 	}
    402 
    403 	return 0;
    404 }
    405 
    406 /*
    407  * Line specific (tty) ioctl routine.
    408  * Provide a way to get the sl unit number.
    409  */
    410 /* ARGSUSED */
    411 static int
    412 sltioctl(struct tty *tp, u_long cmd, void *data, int flag,
    413     struct lwp *l)
    414 {
    415 	struct sl_softc *sc = (struct sl_softc *)tp->t_sc;
    416 
    417 	switch (cmd) {
    418 	case SLIOCGUNIT:
    419 		*(int *)data = sc->sc_unit;	/* XXX */
    420 		break;
    421 
    422 	default:
    423 		return EPASSTHROUGH;
    424 	}
    425 	return 0;
    426 }
    427 
    428 /*
    429  * Queue a packet.  Start transmission if not active.
    430  * Compression happens in slintr(); if we do it here, IP TOS
    431  * will cause us to not compress "background" packets, because
    432  * ordering gets trashed.  It can be done for all packets in slintr().
    433  */
    434 static int
    435 sloutput(struct ifnet *ifp, struct mbuf *m, const struct sockaddr *dst,
    436     const struct rtentry *rtp)
    437 {
    438 	struct sl_softc *sc = ifp->if_softc;
    439 	struct ip *ip;
    440 	struct ifqueue *ifq = NULL;
    441 	int s, error;
    442 
    443 	IFQ_CLASSIFY(&ifp->if_snd, m, dst->sa_family);
    444 
    445 	/*
    446 	 * `Cannot happen' (see slioctl).  Someday we will extend
    447 	 * the line protocol to support other address families.
    448 	 */
    449 	if (dst->sa_family != AF_INET) {
    450 		printf("%s: af%d not supported\n", sc->sc_if.if_xname,
    451 		    dst->sa_family);
    452 		m_freem(m);
    453 		sc->sc_if.if_noproto++;
    454 		return EAFNOSUPPORT;
    455 	}
    456 
    457 	if (sc->sc_ttyp == NULL) {
    458 		m_freem(m);
    459 		return ENETDOWN;	/* sort of */
    460 	}
    461 	if ((sc->sc_ttyp->t_state & TS_CARR_ON) == 0 &&
    462 	    (sc->sc_ttyp->t_cflag & CLOCAL) == 0) {
    463 		m_freem(m);
    464 		printf("%s: no carrier and not local\n", sc->sc_if.if_xname);
    465 		return EHOSTUNREACH;
    466 	}
    467 	ip = mtod(m, struct ip *);
    468 #ifdef INET
    469 	if (sc->sc_if.if_flags & SC_NOICMP && ip->ip_p == IPPROTO_ICMP) {
    470 		m_freem(m);
    471 		return ENETRESET;		/* XXX ? */
    472 	}
    473 #endif
    474 
    475 	s = spltty();
    476 	if (sc->sc_oqlen && sc->sc_ttyp->t_outq.c_cc == sc->sc_oqlen) {
    477 		struct bintime bt;
    478 
    479 		/* if output's been stalled for too long, and restart */
    480 		getbinuptime(&bt);
    481 		bintime_sub(&bt, &sc->sc_lastpacket);
    482 		if (bt.sec > 0) {
    483 			sc->sc_otimeout++;
    484 			slstart(sc->sc_ttyp);
    485 		}
    486 	}
    487 	splx(s);
    488 
    489 	s = splnet();
    490 #ifdef INET
    491 	if ((ip->ip_tos & IPTOS_LOWDELAY) != 0)
    492 		ifq = &sc->sc_fastq;
    493 #endif
    494 	if ((error = ifq_enqueue2(ifp, ifq, m)) != 0) {
    495 		splx(s);
    496 		return error;
    497 	}
    498 	getbinuptime(&sc->sc_lastpacket);
    499 	splx(s);
    500 
    501 	s = spltty();
    502 	if ((sc->sc_oqlen = sc->sc_ttyp->t_outq.c_cc) == 0)
    503 		slstart(sc->sc_ttyp);
    504 	splx(s);
    505 
    506 	return 0;
    507 }
    508 
    509 /*
    510  * Start output on interface.  Get another datagram
    511  * to send from the interface queue and map it to
    512  * the interface before starting output.
    513  */
    514 static int
    515 slstart(struct tty *tp)
    516 {
    517 	struct sl_softc *sc = tp->t_sc;
    518 
    519 	/*
    520 	 * If there is more in the output queue, just send it now.
    521 	 * We are being called in lieu of ttstart and must do what
    522 	 * it would.
    523 	 */
    524 	if (tp->t_outq.c_cc != 0) {
    525 		(*tp->t_oproc)(tp);
    526 		if (tp->t_outq.c_cc > SLIP_HIWAT)
    527 			return 0;
    528 	}
    529 
    530 	/*
    531 	 * This happens briefly when the line shuts down.
    532 	 */
    533 	if (sc == NULL)
    534 		return 0;
    535 	softint_schedule(sc->sc_si);
    536 	return 0;
    537 }
    538 
    539 /*
    540  * Copy data buffer to mbuf chain; add ifnet pointer.
    541  */
    542 static struct mbuf *
    543 sl_btom(struct sl_softc *sc, int len)
    544 {
    545 	struct mbuf *m;
    546 
    547 	/*
    548 	 * Allocate a new input buffer and swap.
    549 	 */
    550 	m = sc->sc_mbuf;
    551 	MGETHDR(sc->sc_mbuf, M_DONTWAIT, MT_DATA);
    552 	if (sc->sc_mbuf == NULL) {
    553 		sc->sc_mbuf = m;
    554 		return NULL;
    555 	}
    556 	MCLGET(sc->sc_mbuf, M_DONTWAIT);
    557 	if ((sc->sc_mbuf->m_flags & M_EXT) == 0) {
    558 		m_freem(sc->sc_mbuf);
    559 		sc->sc_mbuf = m;
    560 		return NULL;
    561 	}
    562 	sc->sc_ep = (u_char *)sc->sc_mbuf->m_ext.ext_buf +
    563 	    sc->sc_mbuf->m_ext.ext_size;
    564 
    565 	m->m_data = sc->sc_pktstart;
    566 
    567 	m->m_pkthdr.len = m->m_len = len;
    568 	m_set_rcvif(m, &sc->sc_if);
    569 	return m;
    570 }
    571 
    572 /*
    573  * tty interface receiver interrupt.
    574  */
    575 static int
    576 slinput(int c, struct tty *tp)
    577 {
    578 	struct sl_softc *sc;
    579 	struct mbuf *m;
    580 	int len;
    581 
    582 	tk_nin++;
    583 	sc = (struct sl_softc *)tp->t_sc;
    584 	if (sc == NULL)
    585 		return 0;
    586 	if ((c & TTY_ERRORMASK) || ((tp->t_state & TS_CARR_ON) == 0 &&
    587 	    (tp->t_cflag & CLOCAL) == 0)) {
    588 		sc->sc_flags |= SC_ERROR;
    589 		return 0;
    590 	}
    591 	c &= TTY_CHARMASK;
    592 
    593 	++sc->sc_if.if_ibytes;
    594 
    595 	if (sc->sc_if.if_flags & IFF_DEBUG) {
    596 		if (c == ABT_ESC) {
    597 			/*
    598 			 * If we have a previous abort, see whether
    599 			 * this one is within the time limit.
    600 			 */
    601 			if (sc->sc_abortcount &&
    602 			    time_second >= sc->sc_starttime + ABT_WINDOW)
    603 				sc->sc_abortcount = 0;
    604 			/*
    605 			 * If we see an abort after "idle" time, count it;
    606 			 * record when the first abort escape arrived.
    607 			 */
    608 			if (time_second >= sc->sc_lasttime + ABT_IDLE) {
    609 				if (++sc->sc_abortcount == 1)
    610 					sc->sc_starttime = time_second;
    611 				if (sc->sc_abortcount >= ABT_COUNT) {
    612 					slclose(tp, 0);
    613 					return 0;
    614 				}
    615 			}
    616 		} else
    617 			sc->sc_abortcount = 0;
    618 		sc->sc_lasttime = time_second;
    619 	}
    620 
    621 	switch (c) {
    622 
    623 	case TRANS_FRAME_ESCAPE:
    624 		if (sc->sc_escape)
    625 			c = FRAME_ESCAPE;
    626 		break;
    627 
    628 	case TRANS_FRAME_END:
    629 		if (sc->sc_escape)
    630 			c = FRAME_END;
    631 		break;
    632 
    633 	case FRAME_ESCAPE:
    634 		sc->sc_escape = 1;
    635 		return 0;
    636 
    637 	case FRAME_END:
    638 		if (sc->sc_flags & SC_ERROR) {
    639 			sc->sc_flags &= ~SC_ERROR;
    640 			goto newpack;
    641 		}
    642 		len = sc->sc_mp - sc->sc_pktstart;
    643 		if (len < 3)
    644 			/* less than min length packet - ignore */
    645 			goto newpack;
    646 
    647 		m = sl_btom(sc, len);
    648 		if (m == NULL)
    649 			goto error;
    650 
    651 		IF_ENQUEUE(&sc->sc_inq, m);
    652 		softint_schedule(sc->sc_si);
    653 		goto newpack;
    654 	}
    655 	if (sc->sc_mp < sc->sc_ep) {
    656 		*sc->sc_mp++ = c;
    657 		sc->sc_escape = 0;
    658 		return 0;
    659 	}
    660 
    661 	/* can't put lower; would miss an extra frame */
    662 	sc->sc_flags |= SC_ERROR;
    663 
    664 error:
    665 	sc->sc_if.if_ierrors++;
    666 newpack:
    667 	sc->sc_mp = sc->sc_pktstart = (u_char *)sc->sc_mbuf->m_ext.ext_buf +
    668 	    BUFOFFSET;
    669 	sc->sc_escape = 0;
    670 
    671 	return 0;
    672 }
    673 
    674 static void
    675 slintr(void *arg)
    676 {
    677 	struct sl_softc *sc = arg;
    678 	struct tty *tp = sc->sc_ttyp;
    679 	struct mbuf *m;
    680 	int s, len;
    681 	u_char *pktstart;
    682 #ifdef INET
    683 	u_char c;
    684 #endif
    685 	u_char chdr[CHDR_LEN];
    686 
    687 	KASSERT(tp != NULL);
    688 
    689 	/*
    690 	 * Output processing loop.
    691 	 */
    692 	mutex_enter(softnet_lock);
    693 	for (;;) {
    694 #ifdef INET
    695 		struct ip *ip;
    696 #endif
    697 		struct mbuf *m2;
    698 		struct mbuf *bpf_m;
    699 
    700 		/*
    701 		 * Do not remove the packet from the queue if it
    702 		 * doesn't look like it will fit into the current
    703 		 * serial output queue.  With a packet full of
    704 		 * escapes, this could be as bad as MTU*2+2.
    705 		 */
    706 		s = spltty();
    707 		if (tp->t_outq.c_cn - tp->t_outq.c_cc <
    708 		    2 * sc->sc_if.if_mtu + 2) {
    709 			splx(s);
    710 			break;
    711 		}
    712 		splx(s);
    713 
    714 		/*
    715 		 * Get a packet and send it to the interface.
    716 		 */
    717 		s = splnet();
    718 		IF_DEQUEUE(&sc->sc_fastq, m);
    719 		if (m)
    720 			sc->sc_if.if_omcasts++;	/* XXX */
    721 		else
    722 			IFQ_DEQUEUE(&sc->sc_if.if_snd, m);
    723 		splx(s);
    724 
    725 		if (m == NULL)
    726 			break;
    727 
    728 		/*
    729 		 * We do the header compression here rather than in
    730 		 * sloutput() because the packets will be out of order
    731 		 * if we are using TOS queueing, and the connection
    732 		 * ID compression will get munged when this happens.
    733 		 */
    734 		if (sc->sc_if.if_bpf) {
    735 			/*
    736 			 * We need to save the TCP/IP header before
    737 			 * it's compressed.  To avoid complicated
    738 			 * code, we just make a deep copy of the
    739 			 * entire packet (since this is a serial
    740 			 * line, packets should be short and/or the
    741 			 * copy should be negligible cost compared
    742 			 * to the packet transmission time).
    743 			 */
    744 			bpf_m = m_dup(m, 0, M_COPYALL, M_DONTWAIT);
    745 		} else
    746 			bpf_m = NULL;
    747 #ifdef INET
    748 		if ((ip = mtod(m, struct ip *))->ip_p == IPPROTO_TCP) {
    749 			if (sc->sc_if.if_flags & SC_COMPRESS)
    750 				*mtod(m, u_char *) |=
    751 				    sl_compress_tcp(m, ip, &sc->sc_comp, 1);
    752 		}
    753 #endif
    754 		if (bpf_m)
    755 			bpf_mtap_sl_out(&sc->sc_if, mtod(m, u_char *), bpf_m);
    756 		getbinuptime(&sc->sc_lastpacket);
    757 
    758 		s = spltty();
    759 
    760 		/*
    761 		 * The extra FRAME_END will start up a new packet,
    762 		 * and thus will flush any accumulated garbage.  We
    763 		 * do this whenever the line may have been idle for
    764 		 * some time.
    765 		 */
    766 		if (tp->t_outq.c_cc == 0) {
    767 			sc->sc_if.if_obytes++;
    768 			(void)putc(FRAME_END, &tp->t_outq);
    769 		}
    770 
    771 		while (m) {
    772 			u_char *bp, *cp, *ep;
    773 
    774 			bp = cp = mtod(m, u_char *);
    775 			ep = cp + m->m_len;
    776 			while (cp < ep) {
    777 				/*
    778 				 * Find out how many bytes in the
    779 				 * string we can handle without
    780 				 * doing something special.
    781 				 */
    782 				while (cp < ep) {
    783 					switch (*cp++) {
    784 					case FRAME_ESCAPE:
    785 					case FRAME_END:
    786 						cp--;
    787 						goto out;
    788 					}
    789 				}
    790 				out:
    791 				if (cp > bp) {
    792 					/*
    793 					 * Put N characters at once
    794 					 * into the tty output queue.
    795 					 */
    796 					if (b_to_q(bp, cp - bp, &tp->t_outq))
    797 						break;
    798 					sc->sc_if.if_obytes += cp - bp;
    799 				}
    800 				/*
    801 				 * If there are characters left in
    802 				 * the mbuf, the first one must be
    803 				 * special..  Put it out in a different
    804 				 * form.
    805 				 */
    806 				if (cp < ep) {
    807 					if (putc(FRAME_ESCAPE, &tp->t_outq))
    808 						break;
    809 					if (putc(*cp++ == FRAME_ESCAPE ?
    810 					    TRANS_FRAME_ESCAPE :
    811 					    TRANS_FRAME_END,
    812 					    &tp->t_outq)) {
    813 						(void)unputc(&tp->t_outq);
    814 						break;
    815 					}
    816 					sc->sc_if.if_obytes += 2;
    817 				}
    818 				bp = cp;
    819 			}
    820 			MFREE(m, m2);
    821 			m = m2;
    822 		}
    823 
    824 		if (putc(FRAME_END, &tp->t_outq)) {
    825 			/*
    826 			 * Not enough room.  Remove a char to make
    827 			 * room and end the packet normally.  If
    828 			 * you get many collisions (more than one
    829 			 * or two a day), you probably do not have
    830 			 * enough clists and you should increase
    831 			 * "nclist" in param.c
    832 			 */
    833 			(void)unputc(&tp->t_outq);
    834 			(void)putc(FRAME_END, &tp->t_outq);
    835 			sc->sc_if.if_collisions++;
    836 		} else {
    837 			sc->sc_if.if_obytes++;
    838 			sc->sc_if.if_opackets++;
    839 		}
    840 
    841 		/*
    842 		 * We now have characters in the output queue,
    843 		 * kick the serial port.
    844 		 */
    845 		(*tp->t_oproc)(tp);
    846 		splx(s);
    847 	}
    848 
    849 	/*
    850 	 * Input processing loop.
    851 	 */
    852 	for (;;) {
    853 		s = spltty();
    854 		IF_DEQUEUE(&sc->sc_inq, m);
    855 		splx(s);
    856 		if (m == NULL)
    857 			break;
    858 		pktstart = mtod(m, u_char *);
    859 		len = m->m_pkthdr.len;
    860 		if (sc->sc_if.if_bpf) {
    861 			/*
    862 			 * Save the compressed header, so we
    863 			 * can tack it on later.  Note that we
    864 			 * will end up copying garbage in some
    865 			 * cases but this is okay.  We remember
    866 			 * where the buffer started so we can
    867 			 * compute the new header length.
    868 			 */
    869 			memcpy(chdr, pktstart, CHDR_LEN);
    870 		}
    871 #ifdef INET
    872 		if ((c = (*pktstart & 0xf0)) != (IPVERSION << 4)) {
    873 			if (c & 0x80)
    874 				c = TYPE_COMPRESSED_TCP;
    875 			else if (c == TYPE_UNCOMPRESSED_TCP)
    876 				*pktstart &= 0x4f; /* XXX */
    877 			/*
    878 			 * We've got something that's not an IP
    879 			 * packet.  If compression is enabled,
    880 			 * try to decompress it.  Otherwise, if
    881 			 * `auto-enable' compression is on and
    882 			 * it's a reasonable packet, decompress
    883 			 * it and then enable compression.
    884 			 * Otherwise, drop it.
    885 			 */
    886 			if (sc->sc_if.if_flags & SC_COMPRESS) {
    887 				len = sl_uncompress_tcp(&pktstart, len,
    888 				    (u_int)c, &sc->sc_comp);
    889 				if (len <= 0) {
    890 					m_freem(m);
    891 					continue;
    892 				}
    893 			} else if ((sc->sc_if.if_flags & SC_AUTOCOMP) &&
    894 			    c == TYPE_UNCOMPRESSED_TCP && len >= 40) {
    895 				len = sl_uncompress_tcp(&pktstart, len,
    896 				    (u_int)c, &sc->sc_comp);
    897 				if (len <= 0) {
    898 					m_freem(m);
    899 					continue;
    900 				}
    901 				sc->sc_if.if_flags |= SC_COMPRESS;
    902 			} else {
    903 				m_freem(m);
    904 				continue;
    905 			}
    906 		}
    907 #endif
    908 		m->m_data = (void *) pktstart;
    909 		m->m_pkthdr.len = m->m_len = len;
    910 		if (sc->sc_if.if_bpf) {
    911 			bpf_mtap_sl_in(&sc->sc_if, chdr, &m);
    912 			if (m == NULL)
    913 				continue;
    914 		}
    915 		/*
    916 		 * If the packet will fit into a single
    917 		 * header mbuf, copy it into one, to save
    918 		 * memory.
    919 		 */
    920 		if (m->m_pkthdr.len < MHLEN) {
    921 			struct mbuf *n;
    922 			int pktlen;
    923 
    924 			MGETHDR(n, M_DONTWAIT, MT_DATA);
    925 			pktlen = m->m_pkthdr.len;
    926 			M_MOVE_PKTHDR(n, m);
    927 			memcpy(mtod(n, void *), mtod(m, void *), pktlen);
    928 			n->m_len = m->m_len;
    929 			m_freem(m);
    930 			m = n;
    931 		}
    932 
    933 		sc->sc_if.if_ipackets++;
    934 		getbinuptime(&sc->sc_lastpacket);
    935 
    936 #ifdef INET
    937 		s = splnet();
    938 		if (__predict_false(!pktq_enqueue(ip_pktq, m, 0))) {
    939 			sc->sc_if.if_ierrors++;
    940 			sc->sc_if.if_iqdrops++;
    941 			m_freem(m);
    942 		}
    943 		splx(s);
    944 #endif
    945 	}
    946 	mutex_exit(softnet_lock);
    947 }
    948 
    949 /*
    950  * Process an ioctl request.
    951  */
    952 static int
    953 slioctl(struct ifnet *ifp, u_long cmd, void *data)
    954 {
    955 	struct ifaddr *ifa = (struct ifaddr *)data;
    956 	struct ifreq *ifr = (struct ifreq *)data;
    957 	int s = splnet(), error = 0;
    958 	struct sl_softc *sc = ifp->if_softc;
    959 	struct ppp_stats *psp;
    960 	struct ppp_comp_stats *pcp;
    961 
    962 	switch (cmd) {
    963 
    964 	case SIOCINITIFADDR:
    965 		if (ifa->ifa_addr->sa_family == AF_INET)
    966 			ifp->if_flags |= IFF_UP;
    967 		else
    968 			error = EAFNOSUPPORT;
    969 		break;
    970 
    971 	case SIOCSIFDSTADDR:
    972 		if (ifa->ifa_addr->sa_family != AF_INET)
    973 			error = EAFNOSUPPORT;
    974 		break;
    975 
    976 	case SIOCSIFMTU:
    977 		if ((ifr->ifr_mtu < 3) || (ifr->ifr_mtu > SLMAX)) {
    978 		    error = EINVAL;
    979 		    break;
    980 		}
    981 		/*FALLTHROUGH*/
    982 	case SIOCGIFMTU:
    983 		if ((error = ifioctl_common(&sc->sc_if, cmd, data)) == ENETRESET)
    984 			error = 0;
    985 		break;
    986 
    987 	case SIOCADDMULTI:
    988 	case SIOCDELMULTI:
    989 		if (ifr == 0) {
    990 			error = EAFNOSUPPORT;		/* XXX */
    991 			break;
    992 		}
    993 		switch (ifreq_getaddr(cmd, ifr)->sa_family) {
    994 
    995 #ifdef INET
    996 		case AF_INET:
    997 			break;
    998 #endif
    999 
   1000 		default:
   1001 			error = EAFNOSUPPORT;
   1002 			break;
   1003 		}
   1004 		break;
   1005 
   1006 	case SIOCGPPPSTATS:
   1007 		psp = &((struct ifpppstatsreq *) data)->stats;
   1008 		(void)memset(psp, 0, sizeof(*psp));
   1009 		psp->p.ppp_ibytes = sc->sc_if.if_ibytes;
   1010 		psp->p.ppp_ipackets = sc->sc_if.if_ipackets;
   1011 		psp->p.ppp_ierrors = sc->sc_if.if_ierrors;
   1012 		psp->p.ppp_obytes = sc->sc_if.if_obytes;
   1013 		psp->p.ppp_opackets = sc->sc_if.if_opackets;
   1014 		psp->p.ppp_oerrors = sc->sc_if.if_oerrors;
   1015 #ifdef INET
   1016 		psp->vj.vjs_packets = sc->sc_comp.sls_packets;
   1017 		psp->vj.vjs_compressed = sc->sc_comp.sls_compressed;
   1018 		psp->vj.vjs_searches = sc->sc_comp.sls_searches;
   1019 		psp->vj.vjs_misses = sc->sc_comp.sls_misses;
   1020 		psp->vj.vjs_uncompressedin = sc->sc_comp.sls_uncompressedin;
   1021 		psp->vj.vjs_compressedin = sc->sc_comp.sls_compressedin;
   1022 		psp->vj.vjs_errorin = sc->sc_comp.sls_errorin;
   1023 		psp->vj.vjs_tossed = sc->sc_comp.sls_tossed;
   1024 #endif
   1025 		break;
   1026 
   1027 	case SIOCGPPPCSTATS:
   1028 		pcp = &((struct ifpppcstatsreq *) data)->stats;
   1029 		(void)memset(pcp, 0, sizeof(*pcp));
   1030 		break;
   1031 
   1032 	default:
   1033 		error = ifioctl_common(ifp, cmd, data);
   1034 		break;
   1035 	}
   1036 	splx(s);
   1037 	return error;
   1038 }
   1039