xref: /src/sys/net80211/ieee80211.c

/*	$NetBSD: ieee80211.c,v 1.13 2004/05/09 08:19:21 dyoung Exp $	*/
/*-
 * Copyright (c) 2001 Atsushi Onoe
 * Copyright (c) 2002, 2003 Sam Leffler, Errno Consulting
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <sys/cdefs.h>
#ifdef __FreeBSD__
__FBSDID("$FreeBSD: src/sys/net80211/ieee80211.c,v 1.11 2004/04/02 20:19:20 sam Exp $");
#else
__KERNEL_RCSID(0, "$NetBSD: ieee80211.c,v 1.13 2004/05/09 08:19:21 dyoung Exp $");
#endif

/*
 * IEEE 802.11 generic handler
 */

#include "opt_inet.h"
#include "bpfilter.h"

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <sys/endian.h>
#include <sys/errno.h>
#ifdef __FreeBSD__
#include <sys/bus.h>
#endif
#include <sys/proc.h>
#include <sys/sysctl.h>

#ifdef __FreeBSD__
#include <machine/atomic.h>
#endif

#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_arp.h>
#ifdef __FreeBSD__
#include <net/ethernet.h>
#else
#include <net/if_ether.h>
#endif
#include <net/if_llc.h>

#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_compat.h>
#include <net80211/ieee80211_sysctl.h>

#include <net/bpf.h>

#ifdef INET
#include <netinet/in.h>
#ifdef __FreeBSD__
#include <netinet/if_ether.h>
#else
#include <net/if_ether.h>
#endif
#endif

#ifdef IEEE80211_DEBUG
int	ieee80211_debug = 0;
#ifdef __NetBSD__
static int ieee80211_debug_nodenum;
#endif /* __NetBSD__ */

#ifdef __FreeBSD__
SYSCTL_INT(_debug, OID_AUTO, ieee80211, CTLFLAG_RW, &ieee80211_debug,
	    0, "IEEE 802.11 media debugging printfs");
#endif
#endif

int	ieee80211_inact_max = IEEE80211_INACT_MAX;
static int ieee80211_inact_max_nodenum;

struct ieee80211com_head ieee80211com_head =
    LIST_HEAD_INITIALIZER(ieee80211com_head);

static void ieee80211_set11gbasicrates(struct ieee80211_rateset *,
		enum ieee80211_phymode);

static const char *ieee80211_phymode_name[] = {
	"auto",		/* IEEE80211_MODE_AUTO */
	"11a",		/* IEEE80211_MODE_11A */
	"11b",		/* IEEE80211_MODE_11B */
	"11g",		/* IEEE80211_MODE_11G */
	"FH",		/* IEEE80211_MODE_FH */
	"turbo",	/* IEEE80211_MODE_TURBO */
};

void
ieee80211_ifattach(struct ifnet *ifp)
{
	struct ieee80211com *ic = (void *)ifp;
	struct ieee80211_channel *c;
	int i;

	ether_ifattach(ifp, ic->ic_myaddr);
#if NBPFILTER > 0
	bpfattach2(ifp, DLT_IEEE802_11,
	    sizeof(struct ieee80211_frame_addr4), &ic->ic_rawbpf);
#endif
	ieee80211_crypto_attach(ifp);

	/*
	 * Fill in 802.11 available channel set, mark
	 * all available channels as active, and pick
	 * a default channel if not already specified.
	 */
	memset(ic->ic_chan_avail, 0, sizeof(ic->ic_chan_avail));
	ic->ic_modecaps |= 1<<IEEE80211_MODE_AUTO;
	for (i = 0; i <= IEEE80211_CHAN_MAX; i++) {
		c = &ic->ic_channels[i];
		if (c->ic_flags) {
			/*
			 * Verify driver passed us valid data.
			 */
			if (i != ieee80211_chan2ieee(ic, c)) {
				if_printf(ifp, "bad channel ignored; "
					"freq %u flags %x number %u\n",
					c->ic_freq, c->ic_flags, i);
				c->ic_flags = 0;	/* NB: remove */
				continue;
			}
			setbit(ic->ic_chan_avail, i);
			/*
			 * Identify mode capabilities.
			 */
			if (IEEE80211_IS_CHAN_A(c))
				ic->ic_modecaps |= 1<<IEEE80211_MODE_11A;
			if (IEEE80211_IS_CHAN_B(c))
				ic->ic_modecaps |= 1<<IEEE80211_MODE_11B;
			if (IEEE80211_IS_CHAN_PUREG(c))
				ic->ic_modecaps |= 1<<IEEE80211_MODE_11G;
			if (IEEE80211_IS_CHAN_FHSS(c))
				ic->ic_modecaps |= 1<<IEEE80211_MODE_FH;
			if (IEEE80211_IS_CHAN_T(c))
				ic->ic_modecaps |= 1<<IEEE80211_MODE_TURBO;
		}
	}
	/* validate ic->ic_curmode */
	if ((ic->ic_modecaps & (1<<ic->ic_curmode)) == 0)
		ic->ic_curmode = IEEE80211_MODE_AUTO;
	ic->ic_des_chan = IEEE80211_CHAN_ANYC;	/* any channel is ok */

	(void) ieee80211_setmode(ic, ic->ic_curmode);

	if (ic->ic_lintval == 0)
		ic->ic_lintval = 100;		/* default sleep */
	ic->ic_bmisstimeout = 7*ic->ic_lintval;	/* default 7 beacons */

	LIST_INSERT_HEAD(&ieee80211com_head, ic, ic_list);
	ieee80211_node_attach(ifp);
	ieee80211_proto_attach(ifp);
}

void
ieee80211_ifdetach(struct ifnet *ifp)
{
	struct ieee80211com *ic = (void *)ifp;

	ieee80211_proto_detach(ifp);
	ieee80211_crypto_detach(ifp);
	ieee80211_node_detach(ifp);
	LIST_REMOVE(ic, ic_list);
#ifdef __FreeBSD__
	ifmedia_removeall(&ic->ic_media);
#else
        ifmedia_delete_instance(&ic->ic_media, IFM_INST_ANY);
#endif
#if NBPFILTER > 0
	bpfdetach(ifp);
#endif
	ether_ifdetach(ifp);
}

/*
 * Convert MHz frequency to IEEE channel number.
 */
u_int
ieee80211_mhz2ieee(u_int freq, u_int flags)
{
	if (flags & IEEE80211_CHAN_2GHZ) {	/* 2GHz band */
		if (freq == 2484)
			return 14;
		if (freq < 2484)
			return (freq - 2407) / 5;
		else
			return 15 + ((freq - 2512) / 20);
	} else if (flags & IEEE80211_CHAN_5GHZ) {	/* 5Ghz band */
		return (freq - 5000) / 5;
	} else {				/* either, guess */
		if (freq == 2484)
			return 14;
		if (freq < 2484)
			return (freq - 2407) / 5;
		if (freq < 5000)
			return 15 + ((freq - 2512) / 20);
		return (freq - 5000) / 5;
	}
}

/*
 * Convert channel to IEEE channel number.
 */
u_int
ieee80211_chan2ieee(struct ieee80211com *ic, struct ieee80211_channel *c)
{
	if (ic->ic_channels <= c && c <= &ic->ic_channels[IEEE80211_CHAN_MAX])
		return c - ic->ic_channels;
	else if (c == IEEE80211_CHAN_ANYC)
		return IEEE80211_CHAN_ANY;
	else if (c != NULL) {
		if_printf(&ic->ic_if, "invalid channel freq %u flags %x\n",
			c->ic_freq, c->ic_flags);
		return 0;		/* XXX */
	} else {
		if_printf(&ic->ic_if, "invalid channel (NULL)\n");
		return 0;		/* XXX */
	}
}

/*
 * Convert IEEE channel number to MHz frequency.
 */
u_int
ieee80211_ieee2mhz(u_int chan, u_int flags)
{
	if (flags & IEEE80211_CHAN_2GHZ) {	/* 2GHz band */
		if (chan == 14)
			return 2484;
		if (chan < 14)
			return 2407 + chan*5;
		else
			return 2512 + ((chan-15)*20);
	} else if (flags & IEEE80211_CHAN_5GHZ) {/* 5Ghz band */
		return 5000 + (chan*5);
	} else {				/* either, guess */
		if (chan == 14)
			return 2484;
		if (chan < 14)			/* 0-13 */
			return 2407 + chan*5;
		if (chan < 27)			/* 15-26 */
			return 2512 + ((chan-15)*20);
		return 5000 + (chan*5);
	}
}

/*
 * Setup the media data structures according to the channel and
 * rate tables.  This must be called by the driver after
 * ieee80211_attach and before most anything else.
 */
void
ieee80211_media_init(struct ifnet *ifp,
	ifm_change_cb_t media_change, ifm_stat_cb_t media_stat)
{
#define	ADD(_ic, _s, _o) \
	ifmedia_add(&(_ic)->ic_media, \
		IFM_MAKEWORD(IFM_IEEE80211, (_s), (_o), 0), 0, NULL)
	struct ieee80211com *ic = (void *)ifp;
	struct ifmediareq imr;
	int i, j, mode, rate, maxrate, mword, mopt, r;
	struct ieee80211_rateset *rs;
	struct ieee80211_rateset allrates;

	/*
	 * Do late attach work that must wait for any subclass
	 * (i.e. driver) work such as overriding methods.
	 */
	ieee80211_node_lateattach(ifp);

	/*
	 * Fill in media characteristics.
	 */
	ifmedia_init(&ic->ic_media, 0, media_change, media_stat);
	maxrate = 0;
	memset(&allrates, 0, sizeof(allrates));
	for (mode = IEEE80211_MODE_AUTO; mode < IEEE80211_MODE_MAX; mode++) {
		static const u_int mopts[] = {
			IFM_AUTO,
			IFM_IEEE80211_11A,
			IFM_IEEE80211_11B,
			IFM_IEEE80211_11G,
			IFM_IEEE80211_FH,
			IFM_IEEE80211_11A | IFM_IEEE80211_TURBO,
		};
		if ((ic->ic_modecaps & (1<<mode)) == 0)
			continue;
		mopt = mopts[mode];
		ADD(ic, IFM_AUTO, mopt);	/* e.g. 11a auto */
		if (ic->ic_caps & IEEE80211_C_IBSS)
			ADD(ic, IFM_AUTO, mopt | IFM_IEEE80211_ADHOC);
		if (ic->ic_caps & IEEE80211_C_HOSTAP)
			ADD(ic, IFM_AUTO, mopt | IFM_IEEE80211_HOSTAP);
		if (ic->ic_caps & IEEE80211_C_AHDEMO)
			ADD(ic, IFM_AUTO, mopt | IFM_IEEE80211_ADHOC | IFM_FLAG0);
		if (ic->ic_caps & IEEE80211_C_MONITOR)
			ADD(ic, IFM_AUTO, mopt | IFM_IEEE80211_MONITOR);
		if (mode == IEEE80211_MODE_AUTO)
			continue;
		if_printf(ifp, "%s rates: ", ieee80211_phymode_name[mode]);
		rs = &ic->ic_sup_rates[mode];
		for (i = 0; i < rs->rs_nrates; i++) {
			rate = rs->rs_rates[i];
			mword = ieee80211_rate2media(ic, rate, mode);
			if (mword == 0)
				continue;
			printf("%s%d%sMbps", (i != 0 ? " " : ""),
			    (rate & IEEE80211_RATE_VAL) / 2,
			    ((rate & 0x1) != 0 ? ".5" : ""));
			ADD(ic, mword, mopt);
			if (ic->ic_caps & IEEE80211_C_IBSS)
				ADD(ic, mword, mopt | IFM_IEEE80211_ADHOC);
			if (ic->ic_caps & IEEE80211_C_HOSTAP)
				ADD(ic, mword, mopt | IFM_IEEE80211_HOSTAP);
			if (ic->ic_caps & IEEE80211_C_AHDEMO)
				ADD(ic, mword, mopt | IFM_IEEE80211_ADHOC | IFM_FLAG0);
			if (ic->ic_caps & IEEE80211_C_MONITOR)
				ADD(ic, mword, mopt | IFM_IEEE80211_MONITOR);
			/*
			 * Add rate to the collection of all rates.
			 */
			r = rate & IEEE80211_RATE_VAL;
			for (j = 0; j < allrates.rs_nrates; j++)
				if (allrates.rs_rates[j] == r)
					break;
			if (j == allrates.rs_nrates) {
				/* unique, add to the set */
				allrates.rs_rates[j] = r;
				allrates.rs_nrates++;
			}
			rate = (rate & IEEE80211_RATE_VAL) / 2;
			if (rate > maxrate)
				maxrate = rate;
		}
		printf("\n");
	}
	for (i = 0; i < allrates.rs_nrates; i++) {
		mword = ieee80211_rate2media(ic, allrates.rs_rates[i],
				IEEE80211_MODE_AUTO);
		if (mword == 0)
			continue;
		mword = IFM_SUBTYPE(mword);	/* remove media options */
		ADD(ic, mword, 0);
		if (ic->ic_caps & IEEE80211_C_IBSS)
			ADD(ic, mword, IFM_IEEE80211_ADHOC);
		if (ic->ic_caps & IEEE80211_C_HOSTAP)
			ADD(ic, mword, IFM_IEEE80211_HOSTAP);
		if (ic->ic_caps & IEEE80211_C_AHDEMO)
			ADD(ic, mword, IFM_IEEE80211_ADHOC | IFM_FLAG0);
		if (ic->ic_caps & IEEE80211_C_MONITOR)
			ADD(ic, mword, IFM_IEEE80211_MONITOR);
	}
	ieee80211_media_status(ifp, &imr);
	ifmedia_set(&ic->ic_media, imr.ifm_active);

	if (maxrate)
		ifp->if_baudrate = IF_Mbps(maxrate);

	if (ic->ic_max_aid == 0)
		ic->ic_max_aid = IEEE80211_MAX_AID;

#undef ADD
}

static int
findrate(struct ieee80211com *ic, enum ieee80211_phymode mode, int rate)
{
#define	IEEERATE(_ic,_m,_i) \
	((_ic)->ic_sup_rates[_m].rs_rates[_i] & IEEE80211_RATE_VAL)
	int i, nrates = ic->ic_sup_rates[mode].rs_nrates;
	for (i = 0; i < nrates; i++)
		if (IEEERATE(ic, mode, i) == rate)
			return i;
	return -1;
#undef IEEERATE
}

/*
 * Handle a media change request.
 */
int
ieee80211_media_change(struct ifnet *ifp)
{
	struct ieee80211com *ic = (void *)ifp;
	struct ifmedia_entry *ime;
	enum ieee80211_opmode newopmode;
	enum ieee80211_phymode newphymode;
	int i, j, newrate, error = 0;

	ime = ic->ic_media.ifm_cur;
	/*
	 * First, identify the phy mode.
	 */
	switch (IFM_MODE(ime->ifm_media)) {
	case IFM_IEEE80211_11A:
		newphymode = IEEE80211_MODE_11A;
		break;
	case IFM_IEEE80211_11B:
		newphymode = IEEE80211_MODE_11B;
		break;
	case IFM_IEEE80211_11G:
		newphymode = IEEE80211_MODE_11G;
		break;
	case IFM_IEEE80211_FH:
		newphymode = IEEE80211_MODE_FH;
		break;
	case IFM_AUTO:
		newphymode = IEEE80211_MODE_AUTO;
		break;
	default:
		return EINVAL;
	}
	/*
	 * Turbo mode is an ``option''.  Eventually it
	 * needs to be applied to 11g too.
	 */
	if (ime->ifm_media & IFM_IEEE80211_TURBO) {
		if (newphymode != IEEE80211_MODE_11A)
			return EINVAL;
		newphymode = IEEE80211_MODE_TURBO;
	}
	/*
	 * Validate requested mode is available.
	 */
	if ((ic->ic_modecaps & (1<<newphymode)) == 0)
		return EINVAL;

	/*
	 * Next, the fixed/variable rate.
	 */
	i = -1;
	if (IFM_SUBTYPE(ime->ifm_media) != IFM_AUTO) {
		/*
		 * Convert media subtype to rate.
		 */
		newrate = ieee80211_media2rate(ime->ifm_media);
		if (newrate == 0)
			return EINVAL;
		/*
		 * Check the rate table for the specified/current phy.
		 */
		if (newphymode == IEEE80211_MODE_AUTO) {
			/*
			 * In autoselect mode search for the rate.
			 */
			for (j = IEEE80211_MODE_11A;
			     j < IEEE80211_MODE_MAX; j++) {
				if ((ic->ic_modecaps & (1<<j)) == 0)
					continue;
				i = findrate(ic, j, newrate);
				if (i != -1) {
					/* lock mode too */
					newphymode = j;
					break;
				}
			}
		} else {
			i = findrate(ic, newphymode, newrate);
		}
		if (i == -1)			/* mode/rate mismatch */
			return EINVAL;
	}
	/* NB: defer rate setting to later */

	/*
	 * Deduce new operating mode but don't install it just yet.
	 */
	if ((ime->ifm_media & (IFM_IEEE80211_ADHOC|IFM_FLAG0)) ==
	    (IFM_IEEE80211_ADHOC|IFM_FLAG0))
		newopmode = IEEE80211_M_AHDEMO;
	else if (ime->ifm_media & IFM_IEEE80211_HOSTAP)
		newopmode = IEEE80211_M_HOSTAP;
	else if (ime->ifm_media & IFM_IEEE80211_ADHOC)
		newopmode = IEEE80211_M_IBSS;
	else if (ime->ifm_media & IFM_IEEE80211_MONITOR)
		newopmode = IEEE80211_M_MONITOR;
	else
		newopmode = IEEE80211_M_STA;

	/*
	 * Autoselect doesn't make sense when operating as an AP.
	 * If no phy mode has been selected, pick one and lock it
	 * down so rate tables can be used in forming beacon frames
	 * and the like.
	 */
	if (newopmode == IEEE80211_M_HOSTAP &&
	    newphymode == IEEE80211_MODE_AUTO) {
		for (j = IEEE80211_MODE_11A; j < IEEE80211_MODE_MAX; j++)
			if (ic->ic_modecaps & (1<<j)) {
				newphymode = j;
				break;
			}
	}

	/*
	 * Handle phy mode change.
	 */
	if (ic->ic_curmode != newphymode) {		/* change phy mode */
		error = ieee80211_setmode(ic, newphymode);
		if (error != 0)
			return error;
		error = ENETRESET;
	}

	/*
	 * Committed to changes, install the rate setting.
	 */
	if (ic->ic_fixed_rate != i) {
		ic->ic_fixed_rate = i;			/* set fixed tx rate */
		error = ENETRESET;
	}

	/*
	 * Handle operating mode change.
	 */
	if (ic->ic_opmode != newopmode) {
		ic->ic_opmode = newopmode;
		switch (newopmode) {
		case IEEE80211_M_AHDEMO:
		case IEEE80211_M_HOSTAP:
		case IEEE80211_M_STA:
		case IEEE80211_M_MONITOR:
			ic->ic_flags &= ~IEEE80211_F_IBSSON;
			break;
		case IEEE80211_M_IBSS:
			ic->ic_flags |= IEEE80211_F_IBSSON;
#ifdef notdef
			if (ic->ic_curmode == IEEE80211_MODE_11G)
				ieee80211_set11gbasicrates(
					&ic->ic_suprates[newphymode],
					IEEE80211_MODE_11B);
#endif
			break;
		}
		error = ENETRESET;
	}
#ifdef notdef
	if (error == 0)
		ifp->if_baudrate = ifmedia_baudrate(ime->ifm_media);
#endif
	return error;
}

void
ieee80211_media_status(struct ifnet *ifp, struct ifmediareq *imr)
{
	struct ieee80211com *ic = (void *)ifp;
	struct ieee80211_node *ni = NULL;

	imr->ifm_status = IFM_AVALID;
	imr->ifm_active = IFM_IEEE80211;
	if (ic->ic_state == IEEE80211_S_RUN)
		imr->ifm_status |= IFM_ACTIVE;
	imr->ifm_active |= IFM_AUTO;
	switch (ic->ic_opmode) {
	case IEEE80211_M_STA:
		ni = ic->ic_bss;
		/* calculate rate subtype */
		imr->ifm_active |= ieee80211_rate2media(ic,
			ni->ni_rates.rs_rates[ni->ni_txrate], ic->ic_curmode);
		break;
	case IEEE80211_M_IBSS:
		imr->ifm_active |= IFM_IEEE80211_ADHOC;
		break;
	case IEEE80211_M_AHDEMO:
		/* should not come here */
		break;
	case IEEE80211_M_HOSTAP:
		imr->ifm_active |= IFM_IEEE80211_HOSTAP;
		break;
	case IEEE80211_M_MONITOR:
		imr->ifm_active |= IFM_IEEE80211_MONITOR;
		break;
	}
	switch (ic->ic_curmode) {
	case IEEE80211_MODE_11A:
		imr->ifm_active |= IFM_IEEE80211_11A;
		break;
	case IEEE80211_MODE_11B:
		imr->ifm_active |= IFM_IEEE80211_11B;
		break;
	case IEEE80211_MODE_11G:
		imr->ifm_active |= IFM_IEEE80211_11G;
		break;
	case IEEE80211_MODE_FH:
		imr->ifm_active |= IFM_IEEE80211_FH;
		break;
	case IEEE80211_MODE_TURBO:
		imr->ifm_active |= IFM_IEEE80211_11A
				|  IFM_IEEE80211_TURBO;
		break;
	}
}

void
ieee80211_watchdog(struct ifnet *ifp)
{
	struct ieee80211com *ic = (void *)ifp;

	if (ic->ic_mgt_timer && --ic->ic_mgt_timer == 0)
		ieee80211_new_state(ic, IEEE80211_S_SCAN, -1);
	if (ic->ic_inact_timer && --ic->ic_inact_timer == 0)
		ieee80211_timeout_nodes(ic);

	if (ic->ic_mgt_timer != 0 || ic->ic_inact_timer != 0)
		ifp->if_timer = 1;
}

/*
 * Mark the basic rates for the 11g rate table based on the
 * operating mode.  For real 11g we mark all the 11b rates
 * and 6, 12, and 24 OFDM.  For 11b compatibility we mark only
 * 11b rates.  There's also a pseudo 11a-mode used to mark only
 * the basic OFDM rates.
 */
static void
ieee80211_set11gbasicrates(struct ieee80211_rateset *rs, enum ieee80211_phymode mode)
{
	static const struct ieee80211_rateset basic[] = {
	    { 3, { 12, 24, 48 } },		/* IEEE80211_MODE_11A */
	    { 4, { 2, 4, 11, 22 } },		/* IEEE80211_MODE_11B */
	    { 7, { 2, 4, 11, 22, 12, 24, 48 } },/* IEEE80211_MODE_11G */
	    { 0 },				/* IEEE80211_MODE_FH */
	    { 0 },				/* IEEE80211_MODE_TURBO	*/
	};
	int i, j;

	for (i = 0; i < rs->rs_nrates; i++) {
		rs->rs_rates[i] &= IEEE80211_RATE_VAL;
		for (j = 0; j < basic[mode].rs_nrates; j++)
			if (basic[mode].rs_rates[j] == rs->rs_rates[i]) {
				rs->rs_rates[i] |= IEEE80211_RATE_BASIC;
				break;
			}
	}
}

/*
 * Set the current phy mode and recalculate the active channel
 * set based on the available channels for this mode.  Also
 * select a new default/current channel if the current one is
 * inappropriate for this mode.
 */
int
ieee80211_setmode(struct ieee80211com *ic, enum ieee80211_phymode mode)
{
#define	N(a)	(sizeof(a) / sizeof(a[0]))
	static const u_int chanflags[] = {
		0,			/* IEEE80211_MODE_AUTO */
		IEEE80211_CHAN_A,	/* IEEE80211_MODE_11A */
		IEEE80211_CHAN_B,	/* IEEE80211_MODE_11B */
		IEEE80211_CHAN_PUREG,	/* IEEE80211_MODE_11G */
		IEEE80211_CHAN_FHSS,	/* IEEE80211_MODE_FH */
		IEEE80211_CHAN_T,	/* IEEE80211_MODE_TURBO	*/
	};
	struct ieee80211_channel *c;
	u_int modeflags;
	int i;

	/* validate new mode */
	if ((ic->ic_modecaps & (1<<mode)) == 0) {
		IEEE80211_DPRINTF(("%s: mode %u not supported (caps 0x%x)\n",
			__func__, mode, ic->ic_modecaps));
		return EINVAL;
	}

	/*
	 * Verify at least one channel is present in the available
	 * channel list before committing to the new mode.
	 */
	IASSERT(mode < N(chanflags), ("Unexpected mode %u", mode));
	modeflags = chanflags[mode];
	for (i = 0; i <= IEEE80211_CHAN_MAX; i++) {
		c = &ic->ic_channels[i];
		if (mode == IEEE80211_MODE_AUTO) {
			/* ignore turbo channels for autoselect */
			if ((c->ic_flags &~ IEEE80211_CHAN_TURBO) != 0)
				break;
		} else {
			if ((c->ic_flags & modeflags) == modeflags)
				break;
		}
	}
	if (i > IEEE80211_CHAN_MAX) {
		IEEE80211_DPRINTF(("%s: no channels found for mode %u\n",
			__func__, mode));
		return EINVAL;
	}

	/*
	 * Calculate the active channel set.
	 */
	memset(ic->ic_chan_active, 0, sizeof(ic->ic_chan_active));
	for (i = 0; i <= IEEE80211_CHAN_MAX; i++) {
		c = &ic->ic_channels[i];
		if (mode == IEEE80211_MODE_AUTO) {
			/* take anything but pure turbo channels */
			if ((c->ic_flags &~ IEEE80211_CHAN_TURBO) != 0)
				setbit(ic->ic_chan_active, i);
		} else {
			if ((c->ic_flags & modeflags) == modeflags)
				setbit(ic->ic_chan_active, i);
		}
	}
	/*
	 * If no current/default channel is setup or the current
	 * channel is wrong for the mode then pick the first
	 * available channel from the active list.  This is likely
	 * not the right one.
	 */
	if (ic->ic_ibss_chan == NULL ||
	    isclr(ic->ic_chan_active, ieee80211_chan2ieee(ic, ic->ic_ibss_chan))) {
		for (i = 0; i <= IEEE80211_CHAN_MAX; i++)
			if (isset(ic->ic_chan_active, i)) {
				ic->ic_ibss_chan = &ic->ic_channels[i];
				break;
			}
		IASSERT(ic->ic_ibss_chan != NULL &&
		    isset(ic->ic_chan_active,
			ieee80211_chan2ieee(ic, ic->ic_ibss_chan)),
		    ("Bad IBSS channel %u\n",
		     ieee80211_chan2ieee(ic, ic->ic_ibss_chan)));
	}

	/*
	 * Set/reset state flags that influence beacon contents, etc.
	 *
	 * XXX what if we have stations already associated???
	 * XXX probably not right for autoselect?
	 */
	if (ic->ic_caps & IEEE80211_C_SHPREAMBLE)
		ic->ic_flags |= IEEE80211_F_SHPREAMBLE;
	if (mode == IEEE80211_MODE_11G) {
		if (ic->ic_caps & IEEE80211_C_SHSLOT)
			ic->ic_flags |= IEEE80211_F_SHSLOT;
		ieee80211_set11gbasicrates(&ic->ic_sup_rates[mode],
			IEEE80211_MODE_11G);
	} else {
		ic->ic_flags &= ~IEEE80211_F_SHSLOT;
	}

	ic->ic_curmode = mode;
	return 0;
#undef N
}

/*
 * Return the phy mode for with the specified channel so the
 * caller can select a rate set.  This is problematic and the
 * work here assumes how things work elsewhere in this code.
 *
 * XXX never returns turbo modes -dcy
 */
enum ieee80211_phymode
ieee80211_chan2mode(struct ieee80211com *ic, struct ieee80211_channel *chan)
{
	/*
	 * NB: this assumes the channel would not be supplied to us
	 *     unless it was already compatible with the current mode.
	 */
	if (ic->ic_curmode != IEEE80211_MODE_AUTO)
		return ic->ic_curmode;
	/*
	 * In autoselect mode; deduce a mode based on the channel
	 * characteristics.  We assume that turbo-only channels
	 * are not considered when the channel set is constructed.
	 */
	if (IEEE80211_IS_CHAN_5GHZ(chan))
		return IEEE80211_MODE_11A;
	else if (IEEE80211_IS_CHAN_FHSS(chan))
		return IEEE80211_MODE_FH;
	else if (chan->ic_flags & (IEEE80211_CHAN_OFDM|IEEE80211_CHAN_DYN))
		return IEEE80211_MODE_11G;
	else
		return IEEE80211_MODE_11B;
}

/*
 * convert IEEE80211 rate value to ifmedia subtype.
 * ieee80211 rate is in unit of 0.5Mbps.
 */
int
ieee80211_rate2media(struct ieee80211com *ic, int rate, enum ieee80211_phymode mode)
{
#define	N(a)	(sizeof(a) / sizeof(a[0]))
	static const struct {
		u_int	m;	/* rate + mode */
		u_int	r;	/* if_media rate */
	} rates[] = {
		{   2 | IFM_IEEE80211_FH, IFM_IEEE80211_FH1 },
		{   4 | IFM_IEEE80211_FH, IFM_IEEE80211_FH2 },
		{   2 | IFM_IEEE80211_11B, IFM_IEEE80211_DS1 },
		{   4 | IFM_IEEE80211_11B, IFM_IEEE80211_DS2 },
		{  11 | IFM_IEEE80211_11B, IFM_IEEE80211_DS5 },
		{  22 | IFM_IEEE80211_11B, IFM_IEEE80211_DS11 },
		{  44 | IFM_IEEE80211_11B, IFM_IEEE80211_DS22 },
		{  12 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM6 },
		{  18 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM9 },
		{  24 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM12 },
		{  36 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM18 },
		{  48 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM24 },
		{  72 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM36 },
		{  96 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM48 },
		{ 108 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM54 },
		{   2 | IFM_IEEE80211_11G, IFM_IEEE80211_DS1 },
		{   4 | IFM_IEEE80211_11G, IFM_IEEE80211_DS2 },
		{  11 | IFM_IEEE80211_11G, IFM_IEEE80211_DS5 },
		{  22 | IFM_IEEE80211_11G, IFM_IEEE80211_DS11 },
		{  12 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM6 },
		{  18 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM9 },
		{  24 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM12 },
		{  36 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM18 },
		{  48 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM24 },
		{  72 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM36 },
		{  96 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM48 },
		{ 108 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM54 },
		/* NB: OFDM72 doesn't realy exist so we don't handle it */
	};
	u_int mask, i;

	mask = rate & IEEE80211_RATE_VAL;
	switch (mode) {
	case IEEE80211_MODE_11A:
	case IEEE80211_MODE_TURBO:
		mask |= IFM_IEEE80211_11A;
		break;
	case IEEE80211_MODE_11B:
		mask |= IFM_IEEE80211_11B;
		break;
	case IEEE80211_MODE_FH:
		mask |= IFM_IEEE80211_FH;
		break;
	case IEEE80211_MODE_AUTO:
		/* NB: ic may be NULL for some drivers */
		if (ic && ic->ic_phytype == IEEE80211_T_FH) {
			mask |= IFM_IEEE80211_FH;
			break;
		}
		/* NB: hack, 11g matches both 11b+11a rates */
		/* fall thru... */
	case IEEE80211_MODE_11G:
		mask |= IFM_IEEE80211_11G;
		break;
	}
	for (i = 0; i < N(rates); i++)
		if (rates[i].m == mask)
			return rates[i].r;
	return IFM_AUTO;
#undef N
}

int
ieee80211_media2rate(int mword)
{
#define	N(a)	(sizeof(a) / sizeof(a[0]))
	int i;
	static const struct {
		int subtype;
		int rate;
	} ieeerates[] = {
		{ IFM_AUTO,		-1	},
		{ IFM_MANUAL,		0	},
		{ IFM_NONE,		0	},
		{ IFM_IEEE80211_FH1,	2	},
		{ IFM_IEEE80211_FH2,	4	},
		{ IFM_IEEE80211_DS1,	2	},
		{ IFM_IEEE80211_DS2,	4	},
		{ IFM_IEEE80211_DS5,	11	},
		{ IFM_IEEE80211_DS11,	22	},
		{ IFM_IEEE80211_DS22,	44	},
		{ IFM_IEEE80211_OFDM6,	12	},
		{ IFM_IEEE80211_OFDM9,	18	},
		{ IFM_IEEE80211_OFDM12,	24	},
		{ IFM_IEEE80211_OFDM18,	36	},
		{ IFM_IEEE80211_OFDM24,	48	},
		{ IFM_IEEE80211_OFDM36,	72	},
		{ IFM_IEEE80211_OFDM48,	96	},
		{ IFM_IEEE80211_OFDM54,	108	},
		{ IFM_IEEE80211_OFDM72,	144	},
	};
	for (i = 0; i < N(ieeerates); i++) {
		if (ieeerates[i].subtype == IFM_SUBTYPE(mword))
			return ieeerates[i].rate;
	}
	return 0;
#undef N
}

#ifdef __NetBSD__
struct ieee80211_node_walk {
	struct ieee80211com	*nw_ic;
	struct ieee80211_node	*nw_ni;
	u_short			nw_ifindex;
};

/* TBD factor with sysctl_ath_verify. */
static int
sysctl_ieee80211_verify(SYSCTLFN_ARGS)
{
	int error, t;
	struct sysctlnode node;

	node = *rnode;
	t = *(int*)rnode->sysctl_data;
	node.sysctl_data = &t;
	error = sysctl_lookup(SYSCTLFN_CALL(&node));
	if (error || newp == NULL)
		return (error);

	IEEE80211_DPRINTF(("%s: t = %d, nodenum = %d, rnodenum = %d\n",
	    __func__, t, node.sysctl_num, rnode->sysctl_num));

	if (node.sysctl_num == ieee80211_inact_max_nodenum) {
		if (t < 1)
			return (EINVAL);
		t = roundup(t, IEEE80211_INACT_WAIT) / IEEE80211_INACT_WAIT;
#ifdef IEEE80211_DEBUG
	} else if (node.sysctl_num == ieee80211_debug_nodenum) {
		if (t < 0 || t > 2)
			return (EINVAL);
#endif /* IEEE80211_DEBUG */
	} else
		return (EINVAL);

	*(int*)rnode->sysctl_data = t;

	return (0);
}

static struct ieee80211_node *
ieee80211_node_walkfirst(struct ieee80211_node_walk *nw,
    u_short if_index)
{
	struct ieee80211com *ic;
	(void)memset(nw, 0, sizeof(*nw));

	nw->nw_ifindex = if_index;

	LIST_FOREACH(ic, &ieee80211com_head, ic_list) {
		IEEE80211_DPRINTF(("%s: visiting ic %p\n", __func__, ic));
		if (if_index != 0 && ic->ic_if.if_index != if_index) {
			IEEE80211_DPRINTF(("%s: wrong ifindex, "
			    "skipping ic %p\n", __func__, ic));
			continue;
		}
		nw->nw_ic = ic;
		nw->nw_ni = ic->ic_bss;
	}
	IEEE80211_DPRINTF(("%s: ic %p ni %p\n", __func__, nw->nw_ic,
	    nw->nw_ni));
	return nw->nw_ni;
}

static struct ieee80211_node *
ieee80211_node_walknext(struct ieee80211_node_walk *nw)
{
	KASSERT(nw->nw_ic != NULL && nw->nw_ni != NULL);

	if (nw->nw_ni == nw->nw_ic->ic_bss)
		nw->nw_ni = TAILQ_FIRST(&nw->nw_ic->ic_node);
	else
		nw->nw_ni = TAILQ_NEXT(nw->nw_ni, ni_list);

	while (nw->nw_ni == NULL) {
		if (nw->nw_ifindex != 0)
			return NULL;

		nw->nw_ic = LIST_NEXT(nw->nw_ic, ic_list);
		if (nw->nw_ic == NULL)
			return NULL;

		nw->nw_ni = TAILQ_FIRST(&nw->nw_ic->ic_node);
	}

	IEEE80211_DPRINTF(("%s: ic %p bss %p ni %p\n", __func__, nw->nw_ic,
	    nw->nw_ic->ic_bss, nw->nw_ni));

	return nw->nw_ni;
}

static void
sysctl_ieee80211_fill_node(struct ieee80211_node *ni,
    struct ieee80211_node_sysctl *ns, int ifindex,
    struct ieee80211_channel *chan0)
{
	ns->ns_ifindex = ifindex;
	ns->ns_capinfo = ni->ni_capinfo;
	(void)memcpy(ns->ns_macaddr, ni->ni_macaddr, sizeof(ns->ns_macaddr));
	(void)memcpy(ns->ns_bssid, ni->ni_bssid, sizeof(ns->ns_bssid));
	if (ni->ni_chan != IEEE80211_CHAN_ANYC) {
		ns->ns_freq = ni->ni_chan->ic_freq;
		ns->ns_chanflags = ni->ni_chan->ic_flags;
		ns->ns_chanidx = ni->ni_chan - chan0;
	} else {
		ns->ns_freq = ns->ns_chanflags = 0;
		ns->ns_chanidx = 0;
	}
	ns->ns_rssi = ni->ni_rssi;
	ns->ns_esslen = ni->ni_esslen;
	(void)memcpy(ns->ns_essid, ni->ni_essid, sizeof(ns->ns_essid));
	ns->ns_pwrsave = ni->ni_pwrsave;
	ns->ns_erp = ni->ni_erp;
	ns->ns_associd = ni->ni_associd;
	ns->ns_inact = ni->ni_inact * IEEE80211_INACT_WAIT;
	ns->ns_rstamp = ni->ni_rstamp;
	ns->ns_rates = ni->ni_rates;
	ns->ns_txrate = ni->ni_txrate;
	ns->ns_intval = ni->ni_intval;
	(void)memcpy(ns->ns_tstamp, ni->ni_tstamp, sizeof(ns->ns_tstamp));
	ns->ns_txseq = ni->ni_txseq;
	ns->ns_rxseq = ni->ni_rxseq;
	ns->ns_fhdwell = ni->ni_fhdwell;
	ns->ns_fhindex = ni->ni_fhindex;
	ns->ns_fails = ni->ni_fails;
}

#define IEEE80211_SYSCTL_NODE_GROWTH	10

static int
sysctl_ieee80211_node(SYSCTLFN_ARGS)
{
	struct ieee80211_node_walk nw;
	struct ieee80211_node *ni;
	struct ieee80211_node_sysctl ns;
	char *dp;
	u_int cur_ifindex, ifcount, ifindex, last_ifindex, op, arg, hdr_type;
	size_t len, needed, eltsize, out_size;
	int error, s, nelt;

	if (namelen == 1 && name[0] == CTL_QUERY)
		return (sysctl_query(SYSCTLFN_CALL(rnode)));

	if (namelen != IEEE80211_SYSCTL_NODENAMELEN)
		return (EINVAL);

	/* ifindex.op.arg.header.eltsize.nelt */
	dp = oldp;
	len = (oldp != NULL) ? *oldlenp : 0;
	ifindex = name[IEEE80211_SYSCTL_NODENAME_IF];
	op = name[IEEE80211_SYSCTL_NODENAME_OP];
	arg = name[IEEE80211_SYSCTL_NODENAME_ARG];
	hdr_type = name[IEEE80211_SYSCTL_NODENAME_TYPE];
	eltsize = name[IEEE80211_SYSCTL_NODENAME_ELTSIZE];
	nelt = name[IEEE80211_SYSCTL_NODENAME_ELTCOUNT];
	out_size = MIN(sizeof(ns), eltsize);

	IEEE80211_DPRINTF(("%s: ifindex %u op %u arg %u hdr_type %u eltsize %u "
	    "nelt %d out_size %u\n", __func__, ifindex, op, arg, hdr_type,
	    eltsize, nelt, out_size));

	if (op != IEEE80211_SYSCTL_OP_ALL || arg != 0 ||
	    hdr_type != IEEE80211_SYSCTL_T_NODE || eltsize < 1 || nelt < 0)
		return (EINVAL);

	error = 0;
	needed = 0;
	ifcount = 0;
	last_ifindex = 0;

	s = splnet();

	for (ni = ieee80211_node_walkfirst(&nw, ifindex); ni != NULL;
	     ni = ieee80211_node_walknext(&nw)) {
		struct ieee80211com *ic;

		ic = nw.nw_ic;
		cur_ifindex = ic->ic_if.if_index;

		IEEE80211_DPRINTF(("%s: visit ic %p idx %u\n", __func__, ic,
		    cur_ifindex));

		if (cur_ifindex != last_ifindex) {
			ifcount++;
			last_ifindex = cur_ifindex;
		}

		IEEE80211_DPRINTF(("%s: ni %p dp %p len %u nelt %d\n",
		    __func__, ni, dp, len, nelt));

		if (len >= eltsize && nelt > 0) {
			sysctl_ieee80211_fill_node(ni, &ns, cur_ifindex,
			    &ic->ic_channels[0]);
			error = copyout(&ns, dp, out_size);
			if (error)
				goto cleanup;
			dp += eltsize;
			len -= eltsize;
		}
		if (nelt > 0) {
			needed += eltsize;
			if (nelt != INT_MAX)
				nelt--;
		}
		IEEE80211_DPRINTF(("%s: needed %u\n", __func__, needed));
	}
	IEEE80211_DPRINTF(("%s: %u interfaces\n", __func__, ifcount));
cleanup:
	splx(s);

	*oldlenp = needed;
	if (oldp == NULL)
		*oldlenp += ifcount * IEEE80211_SYSCTL_NODE_GROWTH * eltsize;

	return (error);
}

/*
 * Setup sysctl(3) MIB, net.ieee80211.*
 *
 * TBD condition CTLFLAG_PERMANENT on being an LKM or not
 */
SYSCTL_SETUP(sysctl_ieee80211, "sysctl ieee80211 subtree setup")
{
	int rc;
	struct sysctlnode *cnode, *rnode;

	if ((rc = sysctl_createv(clog, 0, NULL, &rnode,
	    CTLFLAG_PERMANENT, CTLTYPE_NODE, "net", NULL,
	    NULL, 0, NULL, 0, CTL_NET, CTL_EOL)) != 0)
		goto err;

	if ((rc = sysctl_createv(clog, 0, &rnode, &rnode,
	    CTLFLAG_PERMANENT, CTLTYPE_NODE, "link", NULL,
	    NULL, 0, NULL, 0, PF_LINK, CTL_EOL)) != 0)
		goto err;

	if ((rc = sysctl_createv(clog, 0, &rnode, &rnode,
	    CTLFLAG_PERMANENT, CTLTYPE_NODE, "ieee80211", NULL,
	    NULL, 0, NULL, 0, CTL_CREATE, CTL_EOL)) != 0)
		goto err;

	if ((rc = sysctl_createv(clog, 0, &rnode, &cnode,
	    CTLFLAG_PERMANENT, CTLTYPE_NODE, "nodes", NULL,
	    sysctl_ieee80211_node, 0, NULL, 0, CTL_CREATE, CTL_EOL)) != 0)
		goto err;

#ifdef IEEE80211_DEBUG

	/* control debugging printfs */
	if ((rc = sysctl_createv(clog, 0, &rnode, &cnode,
	    CTLFLAG_PERMANENT|CTLFLAG_READWRITE, CTLTYPE_INT,
	    "debug", NULL, sysctl_ieee80211_verify, 0, &ieee80211_debug, 0,
	    CTL_CREATE, CTL_EOL)) != 0)
		goto err;

	ieee80211_debug_nodenum = cnode->sysctl_num;

#endif /* IEEE80211_DEBUG */

	/* control inactivity timer */
	if ((rc = sysctl_createv(clog, 0, &rnode, &cnode,
	    CTLFLAG_PERMANENT|CTLFLAG_READWRITE, CTLTYPE_INT,
	    "maxinact", NULL, sysctl_ieee80211_verify, 0, &ieee80211_inact_max,
	    0, CTL_CREATE, CTL_EOL)) != 0)
		goto err;

	ieee80211_inact_max_nodenum = cnode->sysctl_num;

	return;
err:
	printf("%s: sysctl_createv failed (rc = %d)\n", __func__, rc);
}
#endif /* __NetBSD__ */

#ifdef __FreeBSD__
/*
 * Module glue.
 *
 * NB: the module name is "wlan" for compatibility with NetBSD.
 */

static int
ieee80211_modevent(module_t mod, int type, void *unused)
{
	switch (type) {
	case MOD_LOAD:
		if (bootverbose)
			printf("wlan: <802.11 Link Layer>\n");
		return 0;
	case MOD_UNLOAD:
		return 0;
	}
	return EINVAL;
}

static moduledata_t ieee80211_mod = {
	"wlan",
	ieee80211_modevent,
	0
};
DECLARE_MODULE(wlan, ieee80211_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST);
MODULE_VERSION(wlan, 1);
MODULE_DEPEND(wlan, rc4, 1, 1, 1);
MODULE_DEPEND(wlan, ether, 1, 1, 1);
#endif