xref: /src/sys/net80211/ieee80211_netbsd.h

/*	$NetBSD: ieee80211_netbsd.h,v 1.21.2.5 2018/07/20 20:33:05 phil Exp $ */

/*-
 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
 *
 * Copyright (c) 2003-2008 Sam Leffler, Errno Consulting
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * $FreeBSD:  ieee80211_freebsd.h$
 */
#ifndef _NET80211_IEEE80211_NETBSD_H_
#define _NET80211_IEEE80211_NETBSD_H_

#ifdef _KERNEL
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/atomic.h>
#include <sys/cprng.h>
#include <sys/lock.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/mallocvar.h>
#include <sys/mutex.h>
#include <sys/rwlock.h>
#include <sys/sysctl.h>
#include <sys/workqueue.h>

// #include <net80211/_ieee80211.h>

#include <net/if.h>

/*
 * Defines to make the FreeBSD code work on NetBSD
 */

#define PI_NET IPL_NET
#define EDOOFUS EINVAL
#define IFF_PPROMISC IFF_PROMISC

#define __offsetof(type, field)  __builtin_offsetof(type, field)
#define arc4random  cprng_fast32
#define atomic_subtract_int(var,val) atomic_add_int(var,-(val))
#define caddr_t void *
#define callout_drain(x)  callout_halt(x, NULL)
#define m_catpkt(x,y)    m_cat(x,y)
#define mtx_lock(mtx) 		mutex_enter(mtx)
#define mtx_unlock(mtx)		mutex_exit(mtx)
#define mtx_owned(mtx)		mutex_owned(mtx)
#define mtx_destroy(mtx)	mutex_destroy(mtx)
#define mtx_sleep(a1, a2, a3, a4, a5) /* NNN not sure what it should be. */
#define nitems(x)    (sizeof((x)) / sizeof((x)[0]))
#define ovbcopy(dst,src,size)  memmove(dst,src,size)
#define ticks   hardclock_ticks

/*
 * task stuff needs major work NNN!
 */
static __inline int dummy(void);
static __inline int dummy(void) { return 0; }

struct timeout_task { int needsWork; };

typedef void task_fn_t(void *context, int pending);

struct task {
	/* some kind of queue entry? */
	task_fn_t *t_func;
	void *t_arg;
	int  t_pri;
};
#define TASK_INIT(var, pri, func, arg) do { \
	(var)->t_func = func; \
	(var)->t_arg = arg; \
        (var)->t_pri = pri; \
} while(0)

#define taskqueue workqueue
#define taskqueue_enqueue(queue,task) /* workqueue_enqueue(queue, task, NULL) */
#define taskqueue_drain(queue,task)   /* workqueue_wait(queue, task) */
#define taskqueue_free(queue)         /* workqueue_destroy(queue)  */
#define taskqueue_block(queue)        /* */
#define taskqueue_unblock(queue)      /* */
#define taskqueue_drain_timeout(queue, x) /* */
#define taskqueue_enqueue_timeout(queue, x, y) { int __unused zzz = 0; }
#define taskqueue_cancel_timeout(queue, x, y)  dummy()
#define TIMEOUT_TASK_INIT(queue, a2, a3, a4, a5) /* */

/*  Other stuff that needs to be fixed NNN */
#define priv_check(x,y) 1

/* Coult it be this simple? */
#define if_addr_rlock(ifp) IFNET_LOCK(ifp)
#define if_addr_runlock(x) IFNET_UNLOCK(ifp)

/* VNET defines to remove them ... NNN may need a lot of work! */

#define CURVNET_SET(x)		/* */
#define CURVNET_RESTORE() 	/* */
#define CURVNET_SET_QUIET(x) 	/* */

/* counters */
typedef uint64_t counter_u64_t;
#define counter_u64_free(x) /* */
#define counter_u64_fetch(x) x
#define counter_u64_alloc(x) 0

typedef enum {
        IFCOUNTER_IPACKETS = 0,
        IFCOUNTER_IERRORS,
        IFCOUNTER_OPACKETS,
        IFCOUNTER_OERRORS,
        IFCOUNTER_COLLISIONS,
        IFCOUNTER_IBYTES,
        IFCOUNTER_OBYTES,
        IFCOUNTER_IMCASTS,
        IFCOUNTER_OMCASTS,
        IFCOUNTER_IQDROPS,
        IFCOUNTER_OQDROPS,
        IFCOUNTER_NOPROTO,
        IFCOUNTERS /* Array size. */
} ift_counter;
void       if_inc_counter(struct ifnet *, ift_counter, int64_t);

#define if_get_counter_default(ipf,cnt)                 \
	(cnt == IFCOUNTER_OERRORS ? ipf->if_oerrors :   \
	    (cnt == IFCOUNTER_IERRORS ? ipf->if_ierrors : 0 ))

#define IF_LLADDR(ifp)     IFADDR_FIRST(ifp)

/*
 *  Sysctl support??? BBB
 */

#define SYSCTL_INT(a1, a2, a3, a4, a5, a6, a7)  /* notyet */
#define SYSCTL_PROC(a1, a2, a3, a4, a5, a6, a7, a8, a9)  /* notyet */
#undef SYSCTL_NODE
#define SYSCTL_NODE(a1, a2, a3, a4, a5, a6) int a2 __unused

/* another unknown macro ... at least notyet */
#define SYSINIT(a1, a2, a3, a4, a5)  /* notyet */
#define TEXT_SET(set, sym)   /* notyet ... linker magic, supported?  */

/*
 * FreeBSD code uses KASSERT but different from NetBSD so ...
 */
#define FBSDKASSERT(_cond, _complaint)        \
        do {                                  \
                if (!(_cond))                 \
                        panic _complaint;     \
        } while (/*CONSTCOND*/0)

/*
 * Common state locking definitions.
 */
typedef struct {
	char		name[16];		/* e.g. "ath0_com_lock" */
	kmutex_t	mtx;
} ieee80211_com_lock_t;
#define	IEEE80211_LOCK_INIT(_ic, _name) do {				\
	ieee80211_com_lock_t *cl = &(_ic)->ic_comlock;			\
	snprintf(cl->name, sizeof(cl->name), "%s_com_lock", _name);	\
        mutex_init(&cl->mtx, MUTEX_DEFAULT, IPL_NET);                   \
} while (0)
#define	IEEE80211_LOCK_OBJ(_ic)	(&(_ic)->ic_comlock.mtx)
#define	IEEE80211_LOCK_DESTROY(_ic) mutex_destroy(IEEE80211_LOCK_OBJ(_ic))
#define	IEEE80211_LOCK(_ic)	   mutex_enter(IEEE80211_LOCK_OBJ(_ic))
#define	IEEE80211_UNLOCK(_ic)	   mutex_exit(IEEE80211_LOCK_OBJ(_ic))
#define	IEEE80211_LOCK_ASSERT(_ic)    \
        FBSDKASSERT(mutex_owned(IEEE80211_LOCK_OBJ(_ic)), ("Lock is not owned"))
#define	IEEE80211_UNLOCK_ASSERT(_ic)  \
	FBSDKASSERT(!mutex_owned(IEEE80211_LOCK_OBJ(_ic)), ("Lock is owned"))

/*
 * Transmit lock.
 *
 * This is a (mostly) temporary lock designed to serialise all of the
 * transmission operations throughout the stack.
 */
typedef struct {
	char		name[16];		/* e.g. "ath0_tx_lock" */
	kmutex_t	mtx;
} ieee80211_tx_lock_t;
#define	IEEE80211_TX_LOCK_INIT(_ic, _name) do {				\
	ieee80211_tx_lock_t *cl = &(_ic)->ic_txlock;			\
	snprintf(cl->name, sizeof(cl->name), "%s_tx_lock", _name);	\
	mutex_init(&cl->mtx, MUTEX_DEFAULT, IPL_NET);			\
} while (0)
#define	IEEE80211_TX_LOCK_OBJ(_ic)	(&(_ic)->ic_txlock.mtx)
#define	IEEE80211_TX_LOCK_DESTROY(_ic) mutex_destroy(IEEE80211_TX_LOCK_OBJ(_ic))
#define	IEEE80211_TX_LOCK(_ic)	   mutex_enter(IEEE80211_TX_LOCK_OBJ(_ic))
#define	IEEE80211_TX_UNLOCK(_ic)	   mutex_exit(IEEE80211_TX_LOCK_OBJ(_ic))
#define	IEEE80211_TX_LOCK_ASSERT(_ic) \
	FBSDKASSERT(mutex_owned(IEEE80211_TX_LOCK_OBJ(_ic)), ("lock not owned"))
#define	IEEE80211_TX_UNLOCK_ASSERT(_ic) \
	FBSDKASSERT(!mutex_owned(IEEE80211_TX_LOCK_OBJ(_ic)), ("lock is owned"))

/*
 * Stageq / ni_tx_superg lock
 */
typedef struct {
	char		name[16];		/* e.g. "ath0_ff_lock" */
	kmutex_t	mtx;
} ieee80211_ff_lock_t;
#define IEEE80211_FF_LOCK_INIT(_ic, _name) do {				\
	ieee80211_ff_lock_t *fl = &(_ic)->ic_fflock;			\
	snprintf(fl->name, sizeof(fl->name), "%s_ff_lock", _name);	\
	mutex_init(&fl->mtx, MUTEX_DEFAULT, IPL_NET);                   \
} while (0)
#define IEEE80211_FF_LOCK_OBJ(_ic)	(&(_ic)->ic_fflock.mtx)
#define IEEE80211_FF_LOCK_DESTROY(_ic)	mutex_destroy(IEEE80211_FF_LOCK_OBJ(_ic))
#define IEEE80211_FF_LOCK(_ic)		mutex_enter(IEEE80211_FF_LOCK_OBJ(_ic))
#define IEEE80211_FF_UNLOCK(_ic)	mutex_exit(IEEE80211_FF_LOCK_OBJ(_ic))
#define IEEE80211_FF_LOCK_ASSERT(_ic) \
	FBSDKASSERT(mutex_owned(IEEE80211_FF_LOCK_OBJ(_ic)), ("lock not owned"))

/*
 * Node locking definitions.
 */
typedef struct {
	char		name[16];		/* e.g. "ath0_node_lock" */
	kmutex_t	mtx;
} ieee80211_node_lock_t;
#define	IEEE80211_NODE_LOCK_INIT(_nt, _name) do {			\
	ieee80211_node_lock_t *nl = &(_nt)->nt_nodelock;		\
	snprintf(nl->name, sizeof(nl->name), "%s_node_lock", _name);	\
	mutex_init(&nl->mtx, MUTEX_DEFAULT, IPL_NET);                   \
} while (0)
#define	IEEE80211_NODE_LOCK_OBJ(_nt)	(&(_nt)->nt_nodelock.mtx)
#define	IEEE80211_NODE_LOCK_DESTROY(_nt) \
	mutex_destroy(IEEE80211_NODE_LOCK_OBJ(_nt))
#define	IEEE80211_NODE_LOCK(_nt) \
	mutex_enter(IEEE80211_NODE_LOCK_OBJ(_nt))
#define	IEEE80211_NODE_IS_LOCKED(_nt) \
	mtx_owned(IEEE80211_NODE_LOCK_OBJ(_nt))
#define	IEEE80211_NODE_UNLOCK(_nt) \
	mutex_exit(IEEE80211_NODE_LOCK_OBJ(_nt))
#define	IEEE80211_NODE_LOCK_ASSERT(_nt)	\
	FBSDKASSERT(mutex_owned(IEEE80211_NODE_LOCK_OBJ(_nt)), ("lock not owned"))

/*
 * Power-save queue definitions.
 */
typedef kmutex_t ieee80211_psq_lock_t;
#define	IEEE80211_PSQ_INIT(_psq, _name) \
	mutex_init(&(_psq)->psq_lock, MUTEX_DEFAULT, IPL_NET)
#define	IEEE80211_PSQ_DESTROY(_psq)	mutex_destroy(&(_psq)->psq_lock)
#define	IEEE80211_PSQ_LOCK(_psq)	mutex_enter(&(_psq)->psq_lock)
#define	IEEE80211_PSQ_UNLOCK(_psq)	mutex_exit(&(_psq)->psq_lock)

#ifndef IF_PREPEND_LIST
#define _IF_PREPEND_LIST(ifq, mhead, mtail, mcount) do {	\
	(mtail)->m_nextpkt = (ifq)->ifq_head;			\
	if ((ifq)->ifq_tail == NULL)				\
		(ifq)->ifq_tail = (mtail);			\
	(ifq)->ifq_head = (mhead);				\
	(ifq)->ifq_len += (mcount);				\
} while (0)
#define IF_PREPEND_LIST(ifq, mhead, mtail, mcount) do {		\
	IF_LOCK(ifq);						\
	_IF_PREPEND_LIST(ifq, mhead, mtail, mcount);		\
	IF_UNLOCK(ifq);						\
} while (0)
#endif /* IF_PREPEND_LIST */

/*
 * Age queue definitions.
 */
typedef kmutex_t ieee80211_ageq_lock_t;
#define	IEEE80211_AGEQ_INIT(_aq, _name) \
	mutex_init(&(_aq)->aq_lock, MUTEX_DEFAULT, IPL_NET)
#define	IEEE80211_AGEQ_DESTROY(_aq)	mutex_destroy(&(_aq)->aq_lock)
#define	IEEE80211_AGEQ_LOCK(_aq)	mutex_enter(&(_aq)->aq_lock)
#define	IEEE80211_AGEQ_UNLOCK(_aq)	mutex_exit(&(_aq)->aq_lock)

/*
 * 802.1x MAC ACL database locking definitions.
 */
typedef kmutex_t acl_lock_t;
#define	ACL_LOCK_INIT(_as, _name) \
	mutex_init(&(_as)->as_lock, MUTEX_DEFAULT, IPL_NET)
#define	ACL_LOCK_DESTROY(_as)		mutex_destroy(&(_as)->as_lock)
#define	ACL_LOCK(_as)			mutex_enter(&(_as)->as_lock)
#define	ACL_UNLOCK(_as)			mutex_exit(&(_as)->as_lock)
#define	ACL_LOCK_ASSERT(_as) \
	FBSDKASSERT(mutex_owned((&(_as)->as_lock)), ("lock not owned"))

/*
 * Scan table definitions.
 */
typedef kmutex_t ieee80211_scan_table_lock_t;
#define	IEEE80211_SCAN_TABLE_LOCK_INIT(_st, _name) \
	mutex_init(&(_st)->st_lock, MUTEX_DEFAULT, IPL_NET)
#define	IEEE80211_SCAN_TABLE_LOCK_DESTROY(_st)	mutex_destroy(&(_st)->st_lock)
#define	IEEE80211_SCAN_TABLE_LOCK(_st)		mutex_enter(&(_st)->st_lock)
#define	IEEE80211_SCAN_TABLE_UNLOCK(_st)	mutex_exit(&(_st)->st_lock)

typedef kmutex_t ieee80211_scan_iter_lock_t;
#define	IEEE80211_SCAN_ITER_LOCK_INIT(_st, _name) \
	mutex_init(&(_st)->st_scanlock, MUTEX_DEFAULT, IPL_NET)
#define	IEEE80211_SCAN_ITER_LOCK_DESTROY(_st)	mutex_destroy(&(_st)->st_scanlock)
#define	IEEE80211_SCAN_ITER_LOCK(_st)		mutex_enter(&(_st)->st_scanlock)
#define	IEEE80211_SCAN_ITER_UNLOCK(_st)	mutex_exit(&(_st)->st_scanlock)

/*
 * Mesh node/routing definitions.
 */
typedef kmutex_t ieee80211_rte_lock_t;
#define	MESH_RT_ENTRY_LOCK_INIT(_rt, _name) \
	mutex_init(&(rt)->rt_lock, MUTEX_DEFAULT, IPL_NET)
#define	MESH_RT_ENTRY_LOCK_DESTROY(_rt) \
	mutex_destroy(&(_rt)->rt_lock)
#define	MESH_RT_ENTRY_LOCK(rt)	mutex_enter(&(rt)->rt_lock)
#define	MESH_RT_ENTRY_LOCK_ASSERT(rt)   \
	FBSDKASSERT(mutex_owned(&(rt)->rt_lock), ("mutex not owned"))
#define	MESH_RT_ENTRY_UNLOCK(rt)	mutex_exit(&(rt)->rt_lock)

typedef kmutex_t ieee80211_rt_lock_t;
#define	MESH_RT_LOCK(ms)	mutex_enter(&(ms)->ms_rt_lock)
#define	MESH_RT_LOCK_ASSERT(ms)	\
	FBSDKASSERT(mutex_owned(&(ms)->ms_rt_lock), ("lock not owned"))
#define	MESH_RT_UNLOCK(ms)	mutex_exit(&(ms)->ms_rt_lock)
#define	MESH_RT_LOCK_INIT(ms, name) \
	mutex_init(&(ms)->ms_rt_lock, MUTEX_DEFAULT, IPL_NET)
#define	MESH_RT_LOCK_DESTROY(ms) \
	mutex_destroy(&(ms)->ms_rt_lock)

/*
 * Node reference counting definitions.
 *
 * ieee80211_node_initref	initialize the reference count to 1
 * ieee80211_node_incref	add a reference
 * ieee80211_node_decref	remove a reference
 * ieee80211_node_dectestref	remove a reference and return 1 if this
 *				is the last reference, otherwise 0
 * ieee80211_node_refcnt	reference count for printing (only)
 */

#define ieee80211_node_initref(_ni) \
	do { ((_ni)->ni_refcnt = 1); } while (0)
#define ieee80211_node_incref(_ni) \
	atomic_add_int(&(_ni)->ni_refcnt, 1)
#define	ieee80211_node_decref(_ni) \
	atomic_subtract_int(&(_ni)->ni_refcnt, 1)
struct ieee80211_node;
int	ieee80211_node_dectestref(struct ieee80211_node *ni);
#define	ieee80211_node_refcnt(_ni)	(_ni)->ni_refcnt

struct ifqueue;
struct ieee80211vap;
void	ieee80211_drain_ifq(struct ifqueue *);
void	ieee80211_flush_ifq(struct ifqueue *, struct ieee80211vap *);

void	ieee80211_vap_destroy(struct ieee80211vap *);

#define	IFNET_IS_UP_RUNNING(_ifp) \
	(((_ifp)->if_flags & IFF_UP) && \
	 ((_ifp)->if_flags & IFF_RUNNING))

/* XXX TODO: cap these at 1, as hz may not be 1000 */
#define	msecs_to_ticks(ms)	(((ms)*hz)/1000)
#define	ticks_to_msecs(t)	(1000*(t) / hz)
#define	ticks_to_secs(t)	((t) / hz)

#define ieee80211_time_after(a,b) 	((long)(b) - (long)(a) < 0)
#define ieee80211_time_before(a,b)	ieee80211_time_after(b,a)
#define ieee80211_time_after_eq(a,b)	((long)(a) - (long)(b) >= 0)
#define ieee80211_time_before_eq(a,b)	ieee80211_time_after_eq(b,a)

struct mbuf *ieee80211_getmgtframe(uint8_t **frm, int headroom, int pktlen);

/* tx path usage */
#define	M_ENCAP		M_LINK0		/* 802.11 encap done */
#define	M_EAPOL		M_LINK3		/* PAE/EAPOL frame */
#define	M_PWR_SAV	M_LINK4		/* bypass PS handling */
#define	M_MORE_DATA	M_LINK5		/* more data frames to follow */
#define	M_FF		M_LINK6		/* fast frame / A-MSDU */
#define	M_TXCB		M_LINK7		/* do tx complete callback */
#define	M_AMPDU_MPDU	M_LINK8		/* ok for A-MPDU aggregation */
#define	M_FRAG		M_LINK9		/* frame fragmentation */
#define	M_FIRSTFRAG	M_LINK10	/* first frame fragment */
#define	M_LASTFRAG	M_LINK11	/* last frame fragment */

#define	M_80211_TX \
	(M_ENCAP|M_EAPOL|M_PWR_SAV|M_MORE_DATA|M_FF|M_TXCB| \
	 M_AMPDU_MPDU|M_FRAG|M_FIRSTFRAG|M_LASTFRAG)

/* rx path usage */
#define	M_AMPDU		M_LINK1		/* A-MPDU subframe */
#define	M_WEP		M_LINK2		/* WEP done by hardware */
#if 0
#define	M_AMPDU_MPDU	M_LINK8		/* A-MPDU re-order done */
#endif
#define	M_80211_RX	(M_AMPDU|M_WEP|M_AMPDU_MPDU)

#define	IEEE80211_MBUF_TX_FLAG_BITS \
	M_FLAG_BITS \
	"\15M_ENCAP\17M_EAPOL\20M_PWR_SAV\21M_MORE_DATA\22M_FF\23M_TXCB" \
	"\24M_AMPDU_MPDU\25M_FRAG\26M_FIRSTFRAG\27M_LASTFRAG"

#define	IEEE80211_MBUF_RX_FLAG_BITS \
	M_FLAG_BITS \
	"\15M_AMPDU\16M_WEP\24M_AMPDU_MPDU"

/*
 * Store WME access control bits in the vlan tag.
 * This is safe since it's done after the packet is classified
 * (where we use any previous tag) and because it's passed
 * directly in to the driver and there's no chance someone
 * else will clobber them on us.
 */
#define	M_WME_SETAC(m, ac) \
	((m)->m_pkthdr.ether_vtag = (ac))
#define	M_WME_GETAC(m)	((m)->m_pkthdr.ether_vtag)

/*
 * Mbufs on the power save queue are tagged with an age and
 * timed out.  We reuse the hardware checksum field in the
 * mbuf packet header to store this data.
 */
#define	M_AGE_SET(m,v)		(m->m_pkthdr.csum_data = v)
#define	M_AGE_GET(m)		(m->m_pkthdr.csum_data)
#define	M_AGE_SUB(m,adj)	(m->m_pkthdr.csum_data -= adj)

/*
 * Store the sequence number.  XXX?  correct to use segsz?
 */
#define	M_SEQNO_SET(m, seqno) \
	((m)->m_pkthdr.segsz = (seqno))
#define	M_SEQNO_GET(m)	((m)->m_pkthdr.segsz)

#define	MTAG_ABI_NET80211	1132948340	/* net80211 ABI */

struct ieee80211_cb {
	void	(*func)(struct ieee80211_node *, void *, int status);
	void	*arg;
};
#define	NET80211_TAG_CALLBACK	0	/* xmit complete callback */
int	ieee80211_add_callback(struct mbuf *m,
		void (*func)(struct ieee80211_node *, void *, int), void *arg);
void	ieee80211_process_callback(struct ieee80211_node *, struct mbuf *, int);

#define	NET80211_TAG_XMIT_PARAMS	1
/* See below; this is after the bpf_params definition */

#define	NET80211_TAG_RECV_PARAMS	2

#define	NET80211_TAG_TOA_PARAMS		3

struct ieee80211com;
int	ieee80211_parent_xmitpkt(struct ieee80211com *, struct mbuf *);
int	ieee80211_vap_xmitpkt(struct ieee80211vap *, struct mbuf *);

void	get_random_bytes(void *, size_t);

void	ieee80211_sysctl_attach(struct ieee80211com *);
void	ieee80211_sysctl_detach(struct ieee80211com *);
void	ieee80211_sysctl_vattach(struct ieee80211vap *);
void	ieee80211_sysctl_vdetach(struct ieee80211vap *);

#if notyet
SYSCTL_DECL(_net_wlan);
int	ieee80211_sysctl_msecs_ticks(SYSCTL_HANDLER_ARGS);
#endif


#ifdef notyet

/*
 * A "policy module" is an adjunct module to net80211 that provides
 * functionality that typically includes policy decisions.  This
 * modularity enables extensibility and vendor-supplied functionality.
 */
#define	_IEEE80211_POLICY_MODULE(policy, name, version)			\
typedef void (*policy##_setup)(int);					\
SET_DECLARE(policy##_set, policy##_setup);				\
static int								\
wlan_##name##_modevent(module_t mod, int type, void *unused)		\
{									\
	policy##_setup * const *iter, f;				\
	switch (type) {							\
	case MOD_LOAD:							\
		SET_FOREACH(iter, policy##_set) {			\
			f = (void*) *iter;				\
			f(type);					\
		}							\
		return 0;						\
	case MOD_UNLOAD:						\
	case MOD_QUIESCE:						\
		if (nrefs) {						\
			printf("wlan_" #name ": still in use "		\
				"(%u dynamic refs)\n", nrefs);		\
			return EBUSY;					\
		}							\
		if (type == MOD_UNLOAD) {				\
			SET_FOREACH(iter, policy##_set) {		\
				f = (void*) *iter;			\
				f(type);				\
			}						\
		}							\
		return 0;						\
	}								\
	return EINVAL;							\
}									\
static moduledata_t name##_mod = {					\
	"wlan_" #name,							\
	wlan_##name##_modevent,						\
	0								\
};									\
DECLARE_MODULE(wlan_##name, name##_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST);\
MODULE_VERSION(wlan_##name, version);					\
MODULE_DEPEND(wlan_##name, wlan, 1, 1, 1)

/*
 * Crypto modules implement cipher support.
 */
#define	IEEE80211_CRYPTO_MODULE(name, version)				\
_IEEE80211_POLICY_MODULE(crypto, name, version);			\
static void								\
name##_modevent(int type)						\
{									\
	if (type == MOD_LOAD)						\
		ieee80211_crypto_register(&name);			\
	else								\
		ieee80211_crypto_unregister(&name);			\
}									\
TEXT_SET(crypto##_set, name##_modevent)

/*
 * Scanner modules provide scanning policy.
 */
#define	IEEE80211_SCANNER_MODULE(name, version)				\
	_IEEE80211_POLICY_MODULE(scanner, name, version)

#define	IEEE80211_SCANNER_ALG(name, alg, v)				\
static void								\
name##_modevent(int type)						\
{									\
	if (type == MOD_LOAD)						\
		ieee80211_scanner_register(alg, &v);			\
	else								\
		ieee80211_scanner_unregister(alg, &v);			\
}									\
TEXT_SET(scanner_set, name##_modevent);					\

/*
 * ACL modules implement acl policy.
 */
#define	IEEE80211_ACL_MODULE(name, alg, version)			\
_IEEE80211_POLICY_MODULE(acl, name, version);				\
static void								\
alg##_modevent(int type)						\
{									\
	if (type == MOD_LOAD)						\
		ieee80211_aclator_register(&alg);			\
	else								\
		ieee80211_aclator_unregister(&alg);			\
}									\
TEXT_SET(acl_set, alg##_modevent);					\

/*
 * Authenticator modules handle 802.1x/WPA authentication.
 */
#define	IEEE80211_AUTH_MODULE(name, version)				\
	_IEEE80211_POLICY_MODULE(auth, name, version)

#define	IEEE80211_AUTH_ALG(name, alg, v)				\
static void								\
name##_modevent(int type)						\
{									\
	if (type == MOD_LOAD)						\
		ieee80211_authenticator_register(alg, &v);		\
	else								\
		ieee80211_authenticator_unregister(alg);		\
}									\
TEXT_SET(auth_set, name##_modevent)

/*
 * Rate control modules provide tx rate control support.
 */
#define	IEEE80211_RATECTL_MODULE(alg, version)				\
	_IEEE80211_POLICY_MODULE(ratectl, alg, version);		\

#define	IEEE80211_RATECTL_ALG(name, alg, v)				\
static void								\
alg##_modevent(int type)						\
{									\
	if (type == MOD_LOAD)						\
		ieee80211_ratectl_register(alg, &v);			\
	else								\
		ieee80211_ratectl_unregister(alg);			\
}									\
TEXT_SET(ratectl##_set, alg##_modevent)

#else
/* NNN This looks like module load/unload support ... notyet supported  */
#define _IEEE80211_POLICY_MODULE(policy, name, version)	/* unsupported */
#define IEEE80211_CRYPTO_MODULE(name, version) 		/* unsupported */
#define IEEE80211_SCANNER_MODULE(name, version) 	/* unsupported */
#define IEEE80211_SCANNER_ALG(name, alg, v) 		/* unsupported */
#define IEEE80211_ACL_MODULE(name, alg, version) 	const void *const temp = &alg
#define IEEE80211_AUTH_MODULE(name, version)          	/* unsupported */
#define IEEE80211_AUTH_ALG(name, alg, v) 		/* unsupported */
#define IEEE80211_RATECTL_MODULE(alg, version)          /* unsupported */
#define IEEE80211_RATECTL_ALG(name, alg, v)  		/* unsupported */
#endif

/*
 * IOCTL support
 */

struct ieee80211req;

typedef int ieee80211_ioctl_getfunc(struct ieee80211vap *,  struct ieee80211req *);
#if notyet
SET_DECLARE(ieee80211_ioctl_getset, ieee80211_ioctl_getfunc);
#endif
#define	IEEE80211_IOCTL_GET(_name, _get) TEXT_SET(ieee80211_ioctl_getset, _get)

typedef int ieee80211_ioctl_setfunc(struct ieee80211vap *,  struct ieee80211req *);
#if notyet
SET_DECLARE(ieee80211_ioctl_setset, ieee80211_ioctl_setfunc);
#endif
#define	IEEE80211_IOCTL_SET(_name, _set) TEXT_SET(ieee80211_ioctl_setset, _set)

#endif /* _KERNEL */

/* XXX this stuff belongs elsewhere */
/*
 * Message formats for messages from the net80211 layer to user
 * applications via the routing socket.  These messages are appended
 * to an if_announcemsghdr structure.
 */
struct ieee80211_join_event {
	uint8_t		iev_addr[6];
};

struct ieee80211_leave_event {
	uint8_t		iev_addr[6];
};

struct ieee80211_replay_event {
	uint8_t		iev_src[6];	/* src MAC */
	uint8_t		iev_dst[6];	/* dst MAC */
	uint8_t		iev_cipher;	/* cipher type */
	uint8_t		iev_keyix;	/* key id/index */
	uint64_t	iev_keyrsc;	/* RSC from key */
	uint64_t	iev_rsc;	/* RSC from frame */
};

struct ieee80211_michael_event {
	uint8_t		iev_src[6];	/* src MAC */
	uint8_t		iev_dst[6];	/* dst MAC */
	uint8_t		iev_cipher;	/* cipher type */
	uint8_t		iev_keyix;	/* key id/index */
};

struct ieee80211_wds_event {
	uint8_t		iev_addr[6];
};

struct ieee80211_csa_event {
	uint32_t	iev_flags;	/* channel flags */
	uint16_t	iev_freq;	/* setting in Mhz */
	uint8_t		iev_ieee;	/* IEEE channel number */
	uint8_t		iev_mode;	/* CSA mode */
	uint8_t		iev_count;	/* CSA count */
};

struct ieee80211_cac_event {
	uint32_t	iev_flags;	/* channel flags */
	uint16_t	iev_freq;	/* setting in Mhz */
	uint8_t		iev_ieee;	/* IEEE channel number */
	/* XXX timestamp? */
	uint8_t		iev_type;	/* IEEE80211_NOTIFY_CAC_* */
};

struct ieee80211_radar_event {
	uint32_t	iev_flags;	/* channel flags */
	uint16_t	iev_freq;	/* setting in Mhz */
	uint8_t		iev_ieee;	/* IEEE channel number */
	/* XXX timestamp? */
};

struct ieee80211_auth_event {
	uint8_t		iev_addr[6];
};

struct ieee80211_deauth_event {
	uint8_t		iev_addr[6];
};

struct ieee80211_country_event {
	uint8_t		iev_addr[6];
	uint8_t		iev_cc[2];	/* ISO country code */
};

struct ieee80211_radio_event {
	uint8_t		iev_state;	/* 1 on, 0 off */
};

#define	RTM_IEEE80211_ASSOC	100	/* station associate (bss mode) */
#define	RTM_IEEE80211_REASSOC	101	/* station re-associate (bss mode) */
#define	RTM_IEEE80211_DISASSOC	102	/* station disassociate (bss mode) */
#define	RTM_IEEE80211_JOIN	103	/* station join (ap mode) */
#define	RTM_IEEE80211_LEAVE	104	/* station leave (ap mode) */
#define	RTM_IEEE80211_SCAN	105	/* scan complete, results available */
#define	RTM_IEEE80211_REPLAY	106	/* sequence counter replay detected */
#define	RTM_IEEE80211_MICHAEL	107	/* Michael MIC failure detected */
#define	RTM_IEEE80211_REJOIN	108	/* station re-associate (ap mode) */
#define	RTM_IEEE80211_WDS	109	/* WDS discovery (ap mode) */
#define	RTM_IEEE80211_CSA	110	/* Channel Switch Announcement event */
#define	RTM_IEEE80211_RADAR	111	/* radar event */
#define	RTM_IEEE80211_CAC	112	/* Channel Availability Check event */
#define	RTM_IEEE80211_DEAUTH	113	/* station deauthenticate */
#define	RTM_IEEE80211_AUTH	114	/* station authenticate (ap mode) */
#define	RTM_IEEE80211_COUNTRY	115	/* discovered country code (sta mode) */
#define	RTM_IEEE80211_RADIO	116	/* RF kill switch state change */

/*
 * Structure prepended to raw packets sent through the bpf
 * interface when set to DLT_IEEE802_11_RADIO.  This allows
 * user applications to specify pretty much everything in
 * an Atheros tx descriptor.  XXX need to generalize.
 *
 * XXX cannot be more than 14 bytes as it is copied to a sockaddr's
 * XXX sa_data area.
 */
struct ieee80211_bpf_params {
	uint8_t		ibp_vers;	/* version */
#define	IEEE80211_BPF_VERSION	0
	uint8_t		ibp_len;	/* header length in bytes */
	uint8_t		ibp_flags;
#define	IEEE80211_BPF_SHORTPRE	0x01	/* tx with short preamble */
#define	IEEE80211_BPF_NOACK	0x02	/* tx with no ack */
#define	IEEE80211_BPF_CRYPTO	0x04	/* tx with h/w encryption */
#define	IEEE80211_BPF_FCS	0x10	/* frame incldues FCS */
#define	IEEE80211_BPF_DATAPAD	0x20	/* frame includes data padding */
#define	IEEE80211_BPF_RTS	0x40	/* tx with RTS/CTS */
#define	IEEE80211_BPF_CTS	0x80	/* tx with CTS only */
	uint8_t		ibp_pri;	/* WME/WMM AC+tx antenna */
	uint8_t		ibp_try0;	/* series 1 try count */
	uint8_t		ibp_rate0;	/* series 1 IEEE tx rate */
	uint8_t		ibp_power;	/* tx power (device units) */
	uint8_t		ibp_ctsrate;	/* IEEE tx rate for CTS */
	uint8_t		ibp_try1;	/* series 2 try count */
	uint8_t		ibp_rate1;	/* series 2 IEEE tx rate */
	uint8_t		ibp_try2;	/* series 3 try count */
	uint8_t		ibp_rate2;	/* series 3 IEEE tx rate */
	uint8_t		ibp_try3;	/* series 4 try count */
	uint8_t		ibp_rate3;	/* series 4 IEEE tx rate */
};

#ifdef _KERNEL
struct ieee80211_tx_params {
	struct ieee80211_bpf_params params;
};
int	ieee80211_add_xmit_params(struct mbuf *m,
	    const struct ieee80211_bpf_params *);
int	ieee80211_get_xmit_params(struct mbuf *m,
	    struct ieee80211_bpf_params *);

struct ieee80211_rx_params;
struct ieee80211_rx_stats;

int	ieee80211_add_rx_params(struct mbuf *m,
	    const struct ieee80211_rx_stats *rxs);
int	ieee80211_get_rx_params(struct mbuf *m,
	    struct ieee80211_rx_stats *rxs);
const struct ieee80211_rx_stats * ieee80211_get_rx_params_ptr(struct mbuf *m);

struct ieee80211_toa_params {
	int request_id;
};
int	ieee80211_add_toa_params(struct mbuf *m,
	    const struct ieee80211_toa_params *p);
int	ieee80211_get_toa_params(struct mbuf *m,
	    struct ieee80211_toa_params *p);

#define	IEEE80211_F_SURVEY_TIME		0x00000001
#define	IEEE80211_F_SURVEY_TIME_BUSY	0x00000002
#define	IEEE80211_F_SURVEY_NOISE_DBM	0x00000004
#define	IEEE80211_F_SURVEY_TSC		0x00000008
struct ieee80211_channel_survey {
	uint32_t s_flags;
	uint32_t s_time;
	uint32_t s_time_busy;
	int32_t s_noise;
	uint64_t s_tsc;
};

#endif /* _KERNEL */

/*
 * Malloc API.  Other BSD operating systems have slightly
 * different malloc/free namings (eg DragonflyBSD.)
 */
#define	IEEE80211_MALLOC	malloc
#define	IEEE80211_FREE		free

/* XXX TODO: get rid of WAITOK, fix all the users of it? */
#define	IEEE80211_M_NOWAIT	M_NOWAIT
#define	IEEE80211_M_WAITOK	M_WAITOK
#define	IEEE80211_M_ZERO	M_ZERO

/* XXX TODO: the type fields */

/*
 * Startup function for NetBSD
 */

int ieee80211_init0(void);


/*
 * Functions FreeBSD uses that NetBSD doesn't have ...
 */

int	if_printf(struct ifnet *ifp, const char *fmt, ...)  __printflike(2, 3);
void	m_align(struct mbuf *m, int len);
int	m_append(struct mbuf *m0, int len, const void *cpv);
struct mbuf * m_unshare(struct mbuf *m0, int how);

static __inline void m_clrprotoflags(struct mbuf *m)
{
	m->m_flags &= ~(M_LINK0|M_LINK1|M_LINK2|M_LINK3|M_LINK4|M_LINK5
	    |M_LINK6|M_LINK7|M_LINK8|M_LINK9|M_LINK10|M_LINK11);
}

/*-
 * Macro for type conversion: convert mbuf pointer to data pointer of correct
 * type:
 *
 * mtod(m, t)   -- Convert mbuf pointer to data pointer of correct type.
 * mtodo(m, o) -- Same as above but with offset 'o' into data.
 */
#define mtod(m, t)      ((t)((m)->m_data))
#define mtodo(m, o)     ((void *)(((m)->m_data) + (o)))

/* Berkeley Packet Filter shim  */

#define BPF_MTAP(_ifp,_m) do {                          \
	bpf_mtap((_ifp), (_m), BPF_D_INOUT);            \
} while (0)

/*  Missing define in net/if_ether.h   */

#define ETHER_IS_BROADCAST(addr) \
        (((addr)[0] & (addr)[1] & (addr)[2] & \
          (addr)[3] & (addr)[4] & (addr)[5]) == 0xff)

#endif /* _NET80211_IEEE80211_NETBSD_H_ */